1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
|
// SPDX-License-Identifier: GPL-2.0
//
// IXP4 GPIO driver
// Copyright (C) 2019 Linus Walleij <linus.walleij@linaro.org>
//
// based on previous work and know-how from:
// Deepak Saxena <dsaxena@plexity.net>
#include <linux/gpio/driver.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/irqchip.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
#include <linux/bitops.h>
#define IXP4XX_REG_GPOUT 0x00
#define IXP4XX_REG_GPOE 0x04
#define IXP4XX_REG_GPIN 0x08
#define IXP4XX_REG_GPIS 0x0C
#define IXP4XX_REG_GPIT1 0x10
#define IXP4XX_REG_GPIT2 0x14
#define IXP4XX_REG_GPCLK 0x18
#define IXP4XX_REG_GPDBSEL 0x1C
/*
* The hardware uses 3 bits to indicate interrupt "style".
* we clear and set these three bits accordingly. The lower 24
* bits in two registers (GPIT1 and GPIT2) are used to set up
* the style for 8 lines each for a total of 16 GPIO lines.
*/
#define IXP4XX_GPIO_STYLE_ACTIVE_HIGH 0x0
#define IXP4XX_GPIO_STYLE_ACTIVE_LOW 0x1
#define IXP4XX_GPIO_STYLE_RISING_EDGE 0x2
#define IXP4XX_GPIO_STYLE_FALLING_EDGE 0x3
#define IXP4XX_GPIO_STYLE_TRANSITIONAL 0x4
#define IXP4XX_GPIO_STYLE_MASK GENMASK(2, 0)
#define IXP4XX_GPIO_STYLE_SIZE 3
/**
* struct ixp4xx_gpio - IXP4 GPIO state container
* @dev: containing device for this instance
* @fwnode: the fwnode for this GPIO chip
* @gc: gpiochip for this instance
* @base: remapped I/O-memory base
* @irq_edge: Each bit represents an IRQ: 1: edge-triggered,
* 0: level triggered
*/
struct ixp4xx_gpio {
struct device *dev;
struct fwnode_handle *fwnode;
struct gpio_chip gc;
void __iomem *base;
unsigned long long irq_edge;
};
static void ixp4xx_gpio_irq_ack(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct ixp4xx_gpio *g = gpiochip_get_data(gc);
__raw_writel(BIT(d->hwirq), g->base + IXP4XX_REG_GPIS);
}
static void ixp4xx_gpio_mask_irq(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
irq_chip_mask_parent(d);
gpiochip_disable_irq(gc, d->hwirq);
}
static void ixp4xx_gpio_irq_unmask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct ixp4xx_gpio *g = gpiochip_get_data(gc);
/* ACK when unmasking if not edge-triggered */
if (!(g->irq_edge & BIT(d->hwirq)))
ixp4xx_gpio_irq_ack(d);
gpiochip_enable_irq(gc, d->hwirq);
irq_chip_unmask_parent(d);
}
static int ixp4xx_gpio_irq_set_type(struct irq_data *d, unsigned int type)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct ixp4xx_gpio *g = gpiochip_get_data(gc);
int line = d->hwirq;
unsigned long flags;
u32 int_style;
u32 int_reg;
u32 val;
switch (type) {
case IRQ_TYPE_EDGE_BOTH:
irq_set_handler_locked(d, handle_edge_irq);
int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL;
g->irq_edge |= BIT(d->hwirq);
break;
case IRQ_TYPE_EDGE_RISING:
irq_set_handler_locked(d, handle_edge_irq);
int_style = IXP4XX_GPIO_STYLE_RISING_EDGE;
g->irq_edge |= BIT(d->hwirq);
break;
case IRQ_TYPE_EDGE_FALLING:
irq_set_handler_locked(d, handle_edge_irq);
int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE;
g->irq_edge |= BIT(d->hwirq);
break;
case IRQ_TYPE_LEVEL_HIGH:
irq_set_handler_locked(d, handle_level_irq);
int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH;
g->irq_edge &= ~BIT(d->hwirq);
break;
case IRQ_TYPE_LEVEL_LOW:
irq_set_handler_locked(d, handle_level_irq);
int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW;
g->irq_edge &= ~BIT(d->hwirq);
break;
default:
return -EINVAL;
}
if (line >= 8) {
/* pins 8-15 */
line -= 8;
int_reg = IXP4XX_REG_GPIT2;
} else {
/* pins 0-7 */
int_reg = IXP4XX_REG_GPIT1;
}
raw_spin_lock_irqsave(&g->gc.bgpio_lock, flags);
/* Clear the style for the appropriate pin */
val = __raw_readl(g->base + int_reg);
val &= ~(IXP4XX_GPIO_STYLE_MASK << (line * IXP4XX_GPIO_STYLE_SIZE));
__raw_writel(val, g->base + int_reg);
__raw_writel(BIT(line), g->base + IXP4XX_REG_GPIS);
/* Set the new style */
val = __raw_readl(g->base + int_reg);
val |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE));
__raw_writel(val, g->base + int_reg);
/* Force-configure this line as an input */
val = __raw_readl(g->base + IXP4XX_REG_GPOE);
val |= BIT(d->hwirq);
__raw_writel(val, g->base + IXP4XX_REG_GPOE);
raw_spin_unlock_irqrestore(&g->gc.bgpio_lock, flags);
/* This parent only accept level high (asserted) */
return irq_chip_set_type_parent(d, IRQ_TYPE_LEVEL_HIGH);
}
static const struct irq_chip ixp4xx_gpio_irqchip = {
.name = "IXP4GPIO",
.irq_ack = ixp4xx_gpio_irq_ack,
.irq_mask = ixp4xx_gpio_mask_irq,
.irq_unmask = ixp4xx_gpio_irq_unmask,
.irq_set_type = ixp4xx_gpio_irq_set_type,
.flags = IRQCHIP_IMMUTABLE,
GPIOCHIP_IRQ_RESOURCE_HELPERS,
};
static int ixp4xx_gpio_child_to_parent_hwirq(struct gpio_chip *gc,
unsigned int child,
unsigned int child_type,
unsigned int *parent,
unsigned int *parent_type)
{
/* All these interrupts are level high in the CPU */
*parent_type = IRQ_TYPE_LEVEL_HIGH;
/* GPIO lines 0..12 have dedicated IRQs */
if (child == 0) {
*parent = 6;
return 0;
}
if (child == 1) {
*parent = 7;
return 0;
}
if (child >= 2 && child <= 12) {
*parent = child + 17;
return 0;
}
return -EINVAL;
}
static int ixp4xx_gpio_probe(struct platform_device *pdev)
{
unsigned long flags;
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct irq_domain *parent;
struct ixp4xx_gpio *g;
struct gpio_irq_chip *girq;
struct device_node *irq_parent;
int ret;
g = devm_kzalloc(dev, sizeof(*g), GFP_KERNEL);
if (!g)
return -ENOMEM;
g->dev = dev;
g->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(g->base))
return PTR_ERR(g->base);
irq_parent = of_irq_find_parent(np);
if (!irq_parent) {
dev_err(dev, "no IRQ parent node\n");
return -ENODEV;
}
parent = irq_find_host(irq_parent);
if (!parent) {
dev_err(dev, "no IRQ parent domain\n");
return -ENODEV;
}
g->fwnode = of_node_to_fwnode(np);
/*
* Make sure GPIO 14 and 15 are NOT used as clocks but GPIO on
* specific machines.
*/
if (of_machine_is_compatible("dlink,dsm-g600-a") ||
of_machine_is_compatible("iom,nas-100d"))
__raw_writel(0x0, g->base + IXP4XX_REG_GPCLK);
/*
* This is a very special big-endian ARM issue: when the IXP4xx is
* run in big endian mode, all registers in the machine are switched
* around to the CPU-native endianness. As you see mostly in the
* driver we use __raw_readl()/__raw_writel() to access the registers
* in the appropriate order. With the GPIO library we need to specify
* byte order explicitly, so this flag needs to be set when compiling
* for big endian.
*/
#if defined(CONFIG_CPU_BIG_ENDIAN)
flags = BGPIOF_BIG_ENDIAN_BYTE_ORDER;
#else
flags = 0;
#endif
/* Populate and register gpio chip */
ret = bgpio_init(&g->gc, dev, 4,
g->base + IXP4XX_REG_GPIN,
g->base + IXP4XX_REG_GPOUT,
NULL,
NULL,
g->base + IXP4XX_REG_GPOE,
flags);
if (ret) {
dev_err(dev, "unable to init generic GPIO\n");
return ret;
}
g->gc.ngpio = 16;
g->gc.label = "IXP4XX_GPIO_CHIP";
/*
* TODO: when we have migrated to device tree and all GPIOs
* are fetched using phandles, set this to -1 to get rid of
* the fixed gpiochip base.
*/
g->gc.base = 0;
g->gc.parent = &pdev->dev;
g->gc.owner = THIS_MODULE;
girq = &g->gc.irq;
gpio_irq_chip_set_chip(girq, &ixp4xx_gpio_irqchip);
girq->fwnode = g->fwnode;
girq->parent_domain = parent;
girq->child_to_parent_hwirq = ixp4xx_gpio_child_to_parent_hwirq;
girq->handler = handle_bad_irq;
girq->default_type = IRQ_TYPE_NONE;
ret = devm_gpiochip_add_data(dev, &g->gc, g);
if (ret) {
dev_err(dev, "failed to add SoC gpiochip\n");
return ret;
}
platform_set_drvdata(pdev, g);
dev_info(dev, "IXP4 GPIO registered\n");
return 0;
}
static const struct of_device_id ixp4xx_gpio_of_match[] = {
{
.compatible = "intel,ixp4xx-gpio",
},
{},
};
static struct platform_driver ixp4xx_gpio_driver = {
.driver = {
.name = "ixp4xx-gpio",
.of_match_table = ixp4xx_gpio_of_match,
},
.probe = ixp4xx_gpio_probe,
};
builtin_platform_driver(ixp4xx_gpio_driver);
|