1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
|
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2014-2015 Pengutronix, Markus Pargmann <mpa@pengutronix.de>
*
* This is the driver for the imx25 GCQ (Generic Conversion Queue)
* connected to the imx25 ADC.
*/
#include <dt-bindings/iio/adc/fsl-imx25-gcq.h>
#include <linux/clk.h>
#include <linux/iio/iio.h>
#include <linux/interrupt.h>
#include <linux/mfd/imx25-tsadc.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#define MX25_GCQ_TIMEOUT (msecs_to_jiffies(2000))
static const char * const driver_name = "mx25-gcq";
enum mx25_gcq_cfgs {
MX25_CFG_XP = 0,
MX25_CFG_YP,
MX25_CFG_XN,
MX25_CFG_YN,
MX25_CFG_WIPER,
MX25_CFG_INAUX0,
MX25_CFG_INAUX1,
MX25_CFG_INAUX2,
MX25_NUM_CFGS,
};
struct mx25_gcq_priv {
struct regmap *regs;
struct completion completed;
struct clk *clk;
int irq;
struct regulator *vref[4];
u32 channel_vref_mv[MX25_NUM_CFGS];
/*
* Lock to protect the device state during a potential concurrent
* read access from userspace. Reading a raw value requires a sequence
* of register writes, then a wait for a completion callback,
* and finally a register read, during which userspace could issue
* another read request. This lock protects a read access from
* ocurring before another one has finished.
*/
struct mutex lock;
};
#define MX25_CQG_CHAN(chan, id) {\
.type = IIO_VOLTAGE,\
.indexed = 1,\
.channel = chan,\
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
BIT(IIO_CHAN_INFO_SCALE),\
.datasheet_name = id,\
}
static const struct iio_chan_spec mx25_gcq_channels[MX25_NUM_CFGS] = {
MX25_CQG_CHAN(MX25_CFG_XP, "xp"),
MX25_CQG_CHAN(MX25_CFG_YP, "yp"),
MX25_CQG_CHAN(MX25_CFG_XN, "xn"),
MX25_CQG_CHAN(MX25_CFG_YN, "yn"),
MX25_CQG_CHAN(MX25_CFG_WIPER, "wiper"),
MX25_CQG_CHAN(MX25_CFG_INAUX0, "inaux0"),
MX25_CQG_CHAN(MX25_CFG_INAUX1, "inaux1"),
MX25_CQG_CHAN(MX25_CFG_INAUX2, "inaux2"),
};
static const char * const mx25_gcq_refp_names[] = {
[MX25_ADC_REFP_YP] = "yp",
[MX25_ADC_REFP_XP] = "xp",
[MX25_ADC_REFP_INT] = "int",
[MX25_ADC_REFP_EXT] = "ext",
};
static irqreturn_t mx25_gcq_irq(int irq, void *data)
{
struct mx25_gcq_priv *priv = data;
u32 stats;
regmap_read(priv->regs, MX25_ADCQ_SR, &stats);
if (stats & MX25_ADCQ_SR_EOQ) {
regmap_update_bits(priv->regs, MX25_ADCQ_MR,
MX25_ADCQ_MR_EOQ_IRQ, MX25_ADCQ_MR_EOQ_IRQ);
complete(&priv->completed);
}
/* Disable conversion queue run */
regmap_update_bits(priv->regs, MX25_ADCQ_CR, MX25_ADCQ_CR_FQS, 0);
/* Acknowledge all possible irqs */
regmap_write(priv->regs, MX25_ADCQ_SR, MX25_ADCQ_SR_FRR |
MX25_ADCQ_SR_FUR | MX25_ADCQ_SR_FOR |
MX25_ADCQ_SR_EOQ | MX25_ADCQ_SR_PD);
return IRQ_HANDLED;
}
static int mx25_gcq_get_raw_value(struct device *dev,
struct iio_chan_spec const *chan,
struct mx25_gcq_priv *priv,
int *val)
{
long timeout;
u32 data;
/* Setup the configuration we want to use */
regmap_write(priv->regs, MX25_ADCQ_ITEM_7_0,
MX25_ADCQ_ITEM(0, chan->channel));
regmap_update_bits(priv->regs, MX25_ADCQ_MR, MX25_ADCQ_MR_EOQ_IRQ, 0);
/* Trigger queue for one run */
regmap_update_bits(priv->regs, MX25_ADCQ_CR, MX25_ADCQ_CR_FQS,
MX25_ADCQ_CR_FQS);
timeout = wait_for_completion_interruptible_timeout(
&priv->completed, MX25_GCQ_TIMEOUT);
if (timeout < 0) {
dev_err(dev, "ADC wait for measurement failed\n");
return timeout;
} else if (timeout == 0) {
dev_err(dev, "ADC timed out\n");
return -ETIMEDOUT;
}
regmap_read(priv->regs, MX25_ADCQ_FIFO, &data);
*val = MX25_ADCQ_FIFO_DATA(data);
return IIO_VAL_INT;
}
static int mx25_gcq_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val,
int *val2, long mask)
{
struct mx25_gcq_priv *priv = iio_priv(indio_dev);
int ret;
switch (mask) {
case IIO_CHAN_INFO_RAW:
mutex_lock(&priv->lock);
ret = mx25_gcq_get_raw_value(&indio_dev->dev, chan, priv, val);
mutex_unlock(&priv->lock);
return ret;
case IIO_CHAN_INFO_SCALE:
*val = priv->channel_vref_mv[chan->channel];
*val2 = 12;
return IIO_VAL_FRACTIONAL_LOG2;
default:
return -EINVAL;
}
}
static const struct iio_info mx25_gcq_iio_info = {
.read_raw = mx25_gcq_read_raw,
};
static const struct regmap_config mx25_gcq_regconfig = {
.max_register = 0x5c,
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
};
static int mx25_gcq_ext_regulator_setup(struct device *dev,
struct mx25_gcq_priv *priv, u32 refp)
{
char reg_name[12];
int ret;
if (priv->vref[refp])
return 0;
ret = snprintf(reg_name, sizeof(reg_name), "vref-%s",
mx25_gcq_refp_names[refp]);
if (ret < 0)
return ret;
priv->vref[refp] = devm_regulator_get_optional(dev, reg_name);
if (IS_ERR(priv->vref[refp]))
return dev_err_probe(dev, PTR_ERR(priv->vref[refp]),
"Error, trying to use external voltage reference without a %s regulator.",
reg_name);
return 0;
}
static int mx25_gcq_setup_cfgs(struct platform_device *pdev,
struct mx25_gcq_priv *priv)
{
struct device_node *np = pdev->dev.of_node;
struct device_node *child;
struct device *dev = &pdev->dev;
int ret, i;
/*
* Setup all configurations registers with a default conversion
* configuration for each input
*/
for (i = 0; i < MX25_NUM_CFGS; ++i)
regmap_write(priv->regs, MX25_ADCQ_CFG(i),
MX25_ADCQ_CFG_YPLL_OFF |
MX25_ADCQ_CFG_XNUR_OFF |
MX25_ADCQ_CFG_XPUL_OFF |
MX25_ADCQ_CFG_REFP_INT |
MX25_ADCQ_CFG_IN(i) |
MX25_ADCQ_CFG_REFN_NGND2);
for_each_child_of_node(np, child) {
u32 reg;
u32 refp = MX25_ADCQ_CFG_REFP_INT;
u32 refn = MX25_ADCQ_CFG_REFN_NGND2;
ret = of_property_read_u32(child, "reg", ®);
if (ret) {
dev_err(dev, "Failed to get reg property\n");
of_node_put(child);
return ret;
}
if (reg >= MX25_NUM_CFGS) {
dev_err(dev,
"reg value is greater than the number of available configuration registers\n");
of_node_put(child);
return -EINVAL;
}
of_property_read_u32(child, "fsl,adc-refp", &refp);
of_property_read_u32(child, "fsl,adc-refn", &refn);
switch (refp) {
case MX25_ADC_REFP_EXT:
case MX25_ADC_REFP_XP:
case MX25_ADC_REFP_YP:
ret = mx25_gcq_ext_regulator_setup(&pdev->dev, priv, refp);
if (ret) {
of_node_put(child);
return ret;
}
priv->channel_vref_mv[reg] =
regulator_get_voltage(priv->vref[refp]);
/* Conversion from uV to mV */
priv->channel_vref_mv[reg] /= 1000;
break;
case MX25_ADC_REFP_INT:
priv->channel_vref_mv[reg] = 2500;
break;
default:
dev_err(dev, "Invalid positive reference %d\n", refp);
of_node_put(child);
return -EINVAL;
}
/*
* Shift the read values to the correct positions within the
* register.
*/
refp = MX25_ADCQ_CFG_REFP(refp);
refn = MX25_ADCQ_CFG_REFN(refn);
if ((refp & MX25_ADCQ_CFG_REFP_MASK) != refp) {
dev_err(dev, "Invalid fsl,adc-refp property value\n");
of_node_put(child);
return -EINVAL;
}
if ((refn & MX25_ADCQ_CFG_REFN_MASK) != refn) {
dev_err(dev, "Invalid fsl,adc-refn property value\n");
of_node_put(child);
return -EINVAL;
}
regmap_update_bits(priv->regs, MX25_ADCQ_CFG(reg),
MX25_ADCQ_CFG_REFP_MASK |
MX25_ADCQ_CFG_REFN_MASK,
refp | refn);
}
regmap_update_bits(priv->regs, MX25_ADCQ_CR,
MX25_ADCQ_CR_FRST | MX25_ADCQ_CR_QRST,
MX25_ADCQ_CR_FRST | MX25_ADCQ_CR_QRST);
regmap_write(priv->regs, MX25_ADCQ_CR,
MX25_ADCQ_CR_PDMSK | MX25_ADCQ_CR_QSM_FQS);
return 0;
}
static int mx25_gcq_probe(struct platform_device *pdev)
{
struct iio_dev *indio_dev;
struct mx25_gcq_priv *priv;
struct mx25_tsadc *tsadc = dev_get_drvdata(pdev->dev.parent);
struct device *dev = &pdev->dev;
void __iomem *mem;
int ret;
int i;
indio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
if (!indio_dev)
return -ENOMEM;
priv = iio_priv(indio_dev);
mem = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(mem))
return PTR_ERR(mem);
priv->regs = devm_regmap_init_mmio(dev, mem, &mx25_gcq_regconfig);
if (IS_ERR(priv->regs)) {
dev_err(dev, "Failed to initialize regmap\n");
return PTR_ERR(priv->regs);
}
mutex_init(&priv->lock);
init_completion(&priv->completed);
ret = mx25_gcq_setup_cfgs(pdev, priv);
if (ret)
return ret;
for (i = 0; i != 4; ++i) {
if (!priv->vref[i])
continue;
ret = regulator_enable(priv->vref[i]);
if (ret)
goto err_regulator_disable;
}
priv->clk = tsadc->clk;
ret = clk_prepare_enable(priv->clk);
if (ret) {
dev_err(dev, "Failed to enable clock\n");
goto err_vref_disable;
}
ret = platform_get_irq(pdev, 0);
if (ret < 0)
goto err_clk_unprepare;
priv->irq = ret;
ret = request_irq(priv->irq, mx25_gcq_irq, 0, pdev->name, priv);
if (ret) {
dev_err(dev, "Failed requesting IRQ\n");
goto err_clk_unprepare;
}
indio_dev->channels = mx25_gcq_channels;
indio_dev->num_channels = ARRAY_SIZE(mx25_gcq_channels);
indio_dev->info = &mx25_gcq_iio_info;
indio_dev->name = driver_name;
ret = iio_device_register(indio_dev);
if (ret) {
dev_err(dev, "Failed to register iio device\n");
goto err_irq_free;
}
platform_set_drvdata(pdev, indio_dev);
return 0;
err_irq_free:
free_irq(priv->irq, priv);
err_clk_unprepare:
clk_disable_unprepare(priv->clk);
err_vref_disable:
i = 4;
err_regulator_disable:
for (; i-- > 0;) {
if (priv->vref[i])
regulator_disable(priv->vref[i]);
}
return ret;
}
static void mx25_gcq_remove(struct platform_device *pdev)
{
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct mx25_gcq_priv *priv = iio_priv(indio_dev);
int i;
iio_device_unregister(indio_dev);
free_irq(priv->irq, priv);
clk_disable_unprepare(priv->clk);
for (i = 4; i-- > 0;) {
if (priv->vref[i])
regulator_disable(priv->vref[i]);
}
}
static const struct of_device_id mx25_gcq_ids[] = {
{ .compatible = "fsl,imx25-gcq", },
{ /* Sentinel */ }
};
MODULE_DEVICE_TABLE(of, mx25_gcq_ids);
static struct platform_driver mx25_gcq_driver = {
.driver = {
.name = "mx25-gcq",
.of_match_table = mx25_gcq_ids,
},
.probe = mx25_gcq_probe,
.remove_new = mx25_gcq_remove,
};
module_platform_driver(mx25_gcq_driver);
MODULE_DESCRIPTION("ADC driver for Freescale mx25");
MODULE_AUTHOR("Markus Pargmann <mpa@pengutronix.de>");
MODULE_LICENSE("GPL v2");
|