path: root/drivers/input/keyboard/qt2160.c

// SPDX-License-Identifier: GPL-2.0-or-later
/*
 *  qt2160.c - Atmel AT42QT2160 Touch Sense Controller
 *
 *  Copyright (C) 2009 Raphael Derosso Pereira <raphaelpereira@gmail.com>
 */

#include <linux/kernel.h>
#include <linux/leds.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/input.h>

#define QT2160_VALID_CHIPID  0x11

#define QT2160_CMD_CHIPID     0
#define QT2160_CMD_CODEVER    1
#define QT2160_CMD_GSTAT      2
#define QT2160_CMD_KEYS3      3
#define QT2160_CMD_KEYS4      4
#define QT2160_CMD_SLIDE      5
#define QT2160_CMD_GPIOS      6
#define QT2160_CMD_SUBVER     7
#define QT2160_CMD_CALIBRATE  10
#define QT2160_CMD_DRIVE_X    70
#define QT2160_CMD_PWMEN_X    74
#define QT2160_CMD_PWM_DUTY   76

#define QT2160_NUM_LEDS_X	8

#define QT2160_CYCLE_INTERVAL	2000 /* msec - 2 sec */

static unsigned char qt2160_key2code[] = {
	KEY_0, KEY_1, KEY_2, KEY_3,
	KEY_4, KEY_5, KEY_6, KEY_7,
	KEY_8, KEY_9, KEY_A, KEY_B,
	KEY_C, KEY_D, KEY_E, KEY_F,
};

#ifdef CONFIG_LEDS_CLASS
struct qt2160_led {
	struct qt2160_data *qt2160;
	struct led_classdev cdev;
	char name[32];
	int id;
	enum led_brightness brightness;
};
#endif

struct qt2160_data {
	struct i2c_client *client;
	struct input_dev *input;
	unsigned short keycodes[ARRAY_SIZE(qt2160_key2code)];
	u16 key_matrix;
#ifdef CONFIG_LEDS_CLASS
	struct qt2160_led leds[QT2160_NUM_LEDS_X];
#endif
};

static int qt2160_read(struct i2c_client *client, u8 reg);
static int qt2160_write(struct i2c_client *client, u8 reg, u8 data);

#ifdef CONFIG_LEDS_CLASS

static int qt2160_led_set(struct led_classdev *cdev,
			  enum led_brightness value)
{
	struct qt2160_led *led = container_of(cdev, struct qt2160_led, cdev);
	struct qt2160_data *qt2160 = led->qt2160;
	struct i2c_client *client = qt2160->client;
	u32 drive, pwmen;

	if (value != led->brightness) {
		drive = qt2160_read(client, QT2160_CMD_DRIVE_X);
		pwmen = qt2160_read(client, QT2160_CMD_PWMEN_X);
		if (value != LED_OFF) {
			drive |= BIT(led->id);
			pwmen |= BIT(led->id);

		} else {
			drive &= ~BIT(led->id);
			pwmen &= ~BIT(led->id);
		}
		qt2160_write(client, QT2160_CMD_DRIVE_X, drive);
		qt2160_write(client, QT2160_CMD_PWMEN_X, pwmen);

		/*
		 * Changing this register will change the brightness
		 * of every LED in the qt2160. It's a HW limitation.
		 */
		if (value != LED_OFF)
			qt2160_write(client, QT2160_CMD_PWM_DUTY, value);

		led->brightness = value;
	}

	return 0;
}

#endif /* CONFIG_LEDS_CLASS */

static int qt2160_read_block(struct i2c_client *client,
			     u8 inireg, u8 *buffer, unsigned int count)
{
	int error, idx = 0;

	/*
	 * Can't use SMBus block data read. Check for I2C functionality to speed
	 * things up whenever possible. Otherwise we will be forced to read
	 * sequentially.
	 */
	if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C))	{

		error = i2c_smbus_write_byte(client, inireg + idx);
		if (error) {
			dev_err(&client->dev,
				"couldn't send request. Returned %d\n", error);
			return error;
		}

		error = i2c_master_recv(client, buffer, count);
		if (error != count) {
			dev_err(&client->dev,
				"couldn't read registers. Returned %d bytes\n", error);
			return error;
		}
	} else {

		while (count--) {
			int data;

			error = i2c_smbus_write_byte(client, inireg + idx);
			if (error) {
				dev_err(&client->dev,
					"couldn't send request. Returned %d\n", error);
				return error;
			}

			data = i2c_smbus_read_byte(client);
			if (data < 0) {
				dev_err(&client->dev,
					"couldn't read register. Returned %d\n", data);
				return data;
			}

			buffer[idx++] = data;
		}
	}

	return 0;
}

static void qt2160_get_key_matrix(struct input_dev *input)
{
	struct qt2160_data *qt2160 = input_get_drvdata(input);
	struct i2c_client *client = qt2160->client;
	u8 regs[6];
	u16 old_matrix, new_matrix;
	int ret, i, mask;

	dev_dbg(&client->dev, "requesting keys...\n");

	/*
	 * Read all registers from General Status Register
	 * to GPIOs register
	 */
	ret = qt2160_read_block(client, QT2160_CMD_GSTAT, regs, 6);
	if (ret) {
		dev_err(&client->dev,
			"could not perform chip read.\n");
		return;
	}

	old_matrix = qt2160->key_matrix;
	qt2160->key_matrix = new_matrix = (regs[2] << 8) | regs[1];

	mask = 0x01;
	for (i = 0; i < 16; ++i, mask <<= 1) {
		int keyval = new_matrix & mask;

		if ((old_matrix & mask) != keyval) {
			input_report_key(input, qt2160->keycodes[i], keyval);
			dev_dbg(&client->dev, "key %d %s\n",
				i, keyval ? "pressed" : "released");
		}
	}

	input_sync(input);
}

static irqreturn_t qt2160_irq(int irq, void *data)
{
	struct input_dev *input = data;

	qt2160_get_key_matrix(input);

	return IRQ_HANDLED;
}

static int qt2160_read(struct i2c_client *client, u8 reg)
{
	int ret;

	ret = i2c_smbus_write_byte(client, reg);
	if (ret) {
		dev_err(&client->dev,
			"couldn't send request. Returned %d\n", ret);
		return ret;
	}

	ret = i2c_smbus_read_byte(client);
	if (ret < 0) {
		dev_err(&client->dev,
			"couldn't read register. Returned %d\n", ret);
		return ret;
	}

	return ret;
}

static int qt2160_write(struct i2c_client *client, u8 reg, u8 data)
{
	int ret;

	ret = i2c_smbus_write_byte_data(client, reg, data);
	if (ret < 0)
		dev_err(&client->dev,
			"couldn't write data. Returned %d\n", ret);

	return ret;
}

#ifdef CONFIG_LEDS_CLASS

static int qt2160_register_leds(struct qt2160_data *qt2160)
{
	struct i2c_client *client = qt2160->client;
	int error;
	int i;

	for (i = 0; i < QT2160_NUM_LEDS_X; i++) {
		struct qt2160_led *led = &qt2160->leds[i];

		snprintf(led->name, sizeof(led->name), "qt2160:x%d", i);
		led->cdev.name = led->name;
		led->cdev.brightness_set_blocking = qt2160_led_set;
		led->cdev.brightness = LED_OFF;
		led->id = i;
		led->qt2160 = qt2160;

		error = devm_led_classdev_register(&client->dev, &led->cdev);
		if (error)
			return error;
	}

	/* Tur off LEDs */
	qt2160_write(client, QT2160_CMD_DRIVE_X, 0);
	qt2160_write(client, QT2160_CMD_PWMEN_X, 0);
	qt2160_write(client, QT2160_CMD_PWM_DUTY, 0);

	return 0;
}

#else

static inline int qt2160_register_leds(struct qt2160_data *qt2160)
{
	return 0;
}

#endif

static bool qt2160_identify(struct i2c_client *client)
{
	int id, ver, rev;

	/* Read Chid ID to check if chip is valid */
	id = qt2160_read(client, QT2160_CMD_CHIPID);
	if (id != QT2160_VALID_CHIPID) {
		dev_err(&client->dev, "ID %d not supported\n", id);
		return false;
	}

	/* Read chip firmware version */
	ver = qt2160_read(client, QT2160_CMD_CODEVER);
	if (ver < 0) {
		dev_err(&client->dev, "could not get firmware version\n");
		return false;
	}

	/* Read chip firmware revision */
	rev = qt2160_read(client, QT2160_CMD_SUBVER);
	if (rev < 0) {
		dev_err(&client->dev, "could not get firmware revision\n");
		return false;
	}

	dev_info(&client->dev, "AT42QT2160 firmware version %d.%d.%d\n",
			ver >> 4, ver & 0xf, rev);

	return true;
}

static int qt2160_probe(struct i2c_client *client)
{
	struct qt2160_data *qt2160;
	struct input_dev *input;
	int i;
	int error;

	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE)) {
		dev_err(&client->dev, "%s adapter not supported\n",
			dev_driver_string(&client->adapter->dev));
		return -ENODEV;
	}

	if (!qt2160_identify(client))
		return -ENODEV;

	/* Chip is valid and active. Allocate structure */
	qt2160 = devm_kzalloc(&client->dev, sizeof(*qt2160), GFP_KERNEL);
	if (!qt2160)
		return -ENOMEM;

	input = devm_input_allocate_device(&client->dev);
	if (!input)
		return -ENOMEM;

	qt2160->client = client;
	qt2160->input = input;

	input->name = "AT42QT2160 Touch Sense Keyboard";
	input->id.bustype = BUS_I2C;

	input->keycode = qt2160->keycodes;
	input->keycodesize = sizeof(qt2160->keycodes[0]);
	input->keycodemax = ARRAY_SIZE(qt2160_key2code);

	__set_bit(EV_KEY, input->evbit);
	__clear_bit(EV_REP, input->evbit);
	for (i = 0; i < ARRAY_SIZE(qt2160_key2code); i++) {
		qt2160->keycodes[i] = qt2160_key2code[i];
		__set_bit(qt2160_key2code[i], input->keybit);
	}
	__clear_bit(KEY_RESERVED, input->keybit);

	input_set_drvdata(input, qt2160);

	/* Calibrate device */
	error = qt2160_write(client, QT2160_CMD_CALIBRATE, 1);
	if (error) {
		dev_err(&client->dev, "failed to calibrate device\n");
		return error;
	}

	if (client->irq) {
		error = devm_request_threaded_irq(&client->dev, client->irq,
						  NULL, qt2160_irq,
						  IRQF_ONESHOT,
						  "qt2160", input);
		if (error) {
			dev_err(&client->dev,
				"failed to allocate irq %d\n", client->irq);
			return error;
		}
	} else {
		error = input_setup_polling(input, qt2160_get_key_matrix);
		if (error) {
			dev_err(&client->dev, "Failed to setup polling\n");
			return error;
		}
		input_set_poll_interval(input, QT2160_CYCLE_INTERVAL);
	}

	error = qt2160_register_leds(qt2160);
	if (error) {
		dev_err(&client->dev, "Failed to register leds\n");
		return error;
	}

	error = input_register_device(qt2160->input);
	if (error) {
		dev_err(&client->dev,
			"Failed to register input device\n");
		return error;
	}

	return 0;
}

static const struct i2c_device_id qt2160_idtable[] = {
	{ "qt2160" },
	{ }
};

MODULE_DEVICE_TABLE(i2c, qt2160_idtable);

static struct i2c_driver qt2160_driver = {
	.driver = {
		.name	= "qt2160",
	},

	.id_table	= qt2160_idtable,
	.probe		= qt2160_probe,
};

module_i2c_driver(qt2160_driver);

MODULE_AUTHOR("Raphael Derosso Pereira <raphaelpereira@gmail.com>");
MODULE_DESCRIPTION("Driver for AT42QT2160 Touch Sensor");
MODULE_LICENSE("GPL");