summaryrefslogtreecommitdiffstats
path: root/drivers/pci/controller/dwc/pcie-bt1.c
blob: 17e696797ff50f92116190059310a4e0ae8e170e (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
// SPDX-License-Identifier: GPL-2.0-only
/*
 * Copyright (C) 2021 BAIKAL ELECTRONICS, JSC
 *
 * Authors:
 *   Vadim Vlasov <Vadim.Vlasov@baikalelectronics.ru>
 *   Serge Semin <Sergey.Semin@baikalelectronics.ru>
 *
 * Baikal-T1 PCIe controller driver
 */

#include <linux/bitfield.h>
#include <linux/bits.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#include <linux/types.h>

#include "pcie-designware.h"

/* Baikal-T1 System CCU control registers */
#define BT1_CCU_PCIE_CLKC			0x140
#define BT1_CCU_PCIE_REQ_PCS_CLK		BIT(16)
#define BT1_CCU_PCIE_REQ_MAC_CLK		BIT(17)
#define BT1_CCU_PCIE_REQ_PIPE_CLK		BIT(18)

#define BT1_CCU_PCIE_RSTC			0x144
#define BT1_CCU_PCIE_REQ_LINK_RST		BIT(13)
#define BT1_CCU_PCIE_REQ_SMLH_RST		BIT(14)
#define BT1_CCU_PCIE_REQ_PHY_RST		BIT(16)
#define BT1_CCU_PCIE_REQ_CORE_RST		BIT(24)
#define BT1_CCU_PCIE_REQ_STICKY_RST		BIT(26)
#define BT1_CCU_PCIE_REQ_NSTICKY_RST		BIT(27)

#define BT1_CCU_PCIE_PMSC			0x148
#define BT1_CCU_PCIE_LTSSM_STATE_MASK		GENMASK(5, 0)
#define BT1_CCU_PCIE_LTSSM_DET_QUIET		0x00
#define BT1_CCU_PCIE_LTSSM_DET_ACT		0x01
#define BT1_CCU_PCIE_LTSSM_POLL_ACT		0x02
#define BT1_CCU_PCIE_LTSSM_POLL_COMP		0x03
#define BT1_CCU_PCIE_LTSSM_POLL_CONF		0x04
#define BT1_CCU_PCIE_LTSSM_PRE_DET_QUIET	0x05
#define BT1_CCU_PCIE_LTSSM_DET_WAIT		0x06
#define BT1_CCU_PCIE_LTSSM_CFG_LNKWD_START	0x07
#define BT1_CCU_PCIE_LTSSM_CFG_LNKWD_ACEPT	0x08
#define BT1_CCU_PCIE_LTSSM_CFG_LNNUM_WAIT	0x09
#define BT1_CCU_PCIE_LTSSM_CFG_LNNUM_ACEPT	0x0a
#define BT1_CCU_PCIE_LTSSM_CFG_COMPLETE		0x0b
#define BT1_CCU_PCIE_LTSSM_CFG_IDLE		0x0c
#define BT1_CCU_PCIE_LTSSM_RCVR_LOCK		0x0d
#define BT1_CCU_PCIE_LTSSM_RCVR_SPEED		0x0e
#define BT1_CCU_PCIE_LTSSM_RCVR_RCVRCFG		0x0f
#define BT1_CCU_PCIE_LTSSM_RCVR_IDLE		0x10
#define BT1_CCU_PCIE_LTSSM_L0			0x11
#define BT1_CCU_PCIE_LTSSM_L0S			0x12
#define BT1_CCU_PCIE_LTSSM_L123_SEND_IDLE	0x13
#define BT1_CCU_PCIE_LTSSM_L1_IDLE		0x14
#define BT1_CCU_PCIE_LTSSM_L2_IDLE		0x15
#define BT1_CCU_PCIE_LTSSM_L2_WAKE		0x16
#define BT1_CCU_PCIE_LTSSM_DIS_ENTRY		0x17
#define BT1_CCU_PCIE_LTSSM_DIS_IDLE		0x18
#define BT1_CCU_PCIE_LTSSM_DISABLE		0x19
#define BT1_CCU_PCIE_LTSSM_LPBK_ENTRY		0x1a
#define BT1_CCU_PCIE_LTSSM_LPBK_ACTIVE		0x1b
#define BT1_CCU_PCIE_LTSSM_LPBK_EXIT		0x1c
#define BT1_CCU_PCIE_LTSSM_LPBK_EXIT_TOUT	0x1d
#define BT1_CCU_PCIE_LTSSM_HOT_RST_ENTRY	0x1e
#define BT1_CCU_PCIE_LTSSM_HOT_RST		0x1f
#define BT1_CCU_PCIE_LTSSM_RCVR_EQ0		0x20
#define BT1_CCU_PCIE_LTSSM_RCVR_EQ1		0x21
#define BT1_CCU_PCIE_LTSSM_RCVR_EQ2		0x22
#define BT1_CCU_PCIE_LTSSM_RCVR_EQ3		0x23
#define BT1_CCU_PCIE_SMLH_LINKUP		BIT(6)
#define BT1_CCU_PCIE_RDLH_LINKUP		BIT(7)
#define BT1_CCU_PCIE_PM_LINKSTATE_L0S		BIT(8)
#define BT1_CCU_PCIE_PM_LINKSTATE_L1		BIT(9)
#define BT1_CCU_PCIE_PM_LINKSTATE_L2		BIT(10)
#define BT1_CCU_PCIE_L1_PENDING			BIT(12)
#define BT1_CCU_PCIE_REQ_EXIT_L1		BIT(14)
#define BT1_CCU_PCIE_LTSSM_RCVR_EQ		BIT(15)
#define BT1_CCU_PCIE_PM_DSTAT_MASK		GENMASK(18, 16)
#define BT1_CCU_PCIE_PM_PME_EN			BIT(20)
#define BT1_CCU_PCIE_PM_PME_STATUS		BIT(21)
#define BT1_CCU_PCIE_AUX_PM_EN			BIT(22)
#define BT1_CCU_PCIE_AUX_PWR_DET		BIT(23)
#define BT1_CCU_PCIE_WAKE_DET			BIT(24)
#define BT1_CCU_PCIE_TURNOFF_REQ		BIT(30)
#define BT1_CCU_PCIE_TURNOFF_ACK		BIT(31)

#define BT1_CCU_PCIE_GENC			0x14c
#define BT1_CCU_PCIE_LTSSM_EN			BIT(1)
#define BT1_CCU_PCIE_DBI2_MODE			BIT(2)
#define BT1_CCU_PCIE_MGMT_EN			BIT(3)
#define BT1_CCU_PCIE_RXLANE_FLIP_EN		BIT(16)
#define BT1_CCU_PCIE_TXLANE_FLIP_EN		BIT(17)
#define BT1_CCU_PCIE_SLV_XFER_PEND		BIT(24)
#define BT1_CCU_PCIE_RCV_XFER_PEND		BIT(25)
#define BT1_CCU_PCIE_DBI_XFER_PEND		BIT(26)
#define BT1_CCU_PCIE_DMA_XFER_PEND		BIT(27)

#define BT1_CCU_PCIE_LTSSM_LINKUP(_pmsc) \
({ \
	int __state = FIELD_GET(BT1_CCU_PCIE_LTSSM_STATE_MASK, _pmsc); \
	__state >= BT1_CCU_PCIE_LTSSM_L0 && __state <= BT1_CCU_PCIE_LTSSM_L2_WAKE; \
})

/* Baikal-T1 PCIe specific control registers */
#define BT1_PCIE_AXI2MGM_LANENUM		0xd04
#define BT1_PCIE_AXI2MGM_LANESEL_MASK		GENMASK(3, 0)

#define BT1_PCIE_AXI2MGM_ADDRCTL		0xd08
#define BT1_PCIE_AXI2MGM_PHYREG_ADDR_MASK	GENMASK(20, 0)
#define BT1_PCIE_AXI2MGM_READ_FLAG		BIT(29)
#define BT1_PCIE_AXI2MGM_DONE			BIT(30)
#define BT1_PCIE_AXI2MGM_BUSY			BIT(31)

#define BT1_PCIE_AXI2MGM_WRITEDATA		0xd0c
#define BT1_PCIE_AXI2MGM_WDATA			GENMASK(15, 0)

#define BT1_PCIE_AXI2MGM_READDATA		0xd10
#define BT1_PCIE_AXI2MGM_RDATA			GENMASK(15, 0)

/* Generic Baikal-T1 PCIe interface resources */
#define BT1_PCIE_NUM_APP_CLKS			ARRAY_SIZE(bt1_pcie_app_clks)
#define BT1_PCIE_NUM_CORE_CLKS			ARRAY_SIZE(bt1_pcie_core_clks)
#define BT1_PCIE_NUM_APP_RSTS			ARRAY_SIZE(bt1_pcie_app_rsts)
#define BT1_PCIE_NUM_CORE_RSTS			ARRAY_SIZE(bt1_pcie_core_rsts)

/* PCIe bus setup delays and timeouts */
#define BT1_PCIE_RST_DELAY_MS			100
#define BT1_PCIE_RUN_DELAY_US			100
#define BT1_PCIE_REQ_DELAY_US			1
#define BT1_PCIE_REQ_TIMEOUT_US			1000
#define BT1_PCIE_LNK_DELAY_US			1000
#define BT1_PCIE_LNK_TIMEOUT_US			1000000

static const enum dw_pcie_app_clk bt1_pcie_app_clks[] = {
	DW_PCIE_DBI_CLK, DW_PCIE_MSTR_CLK, DW_PCIE_SLV_CLK,
};

static const enum dw_pcie_core_clk bt1_pcie_core_clks[] = {
	DW_PCIE_REF_CLK,
};

static const enum dw_pcie_app_rst bt1_pcie_app_rsts[] = {
	DW_PCIE_MSTR_RST, DW_PCIE_SLV_RST,
};

static const enum dw_pcie_core_rst bt1_pcie_core_rsts[] = {
	DW_PCIE_NON_STICKY_RST, DW_PCIE_STICKY_RST, DW_PCIE_CORE_RST,
	DW_PCIE_PIPE_RST, DW_PCIE_PHY_RST, DW_PCIE_HOT_RST, DW_PCIE_PWR_RST,
};

struct bt1_pcie {
	struct dw_pcie dw;
	struct platform_device *pdev;
	struct regmap *sys_regs;
};
#define to_bt1_pcie(_dw) container_of(_dw, struct bt1_pcie, dw)

/*
 * Baikal-T1 MMIO space must be read/written by the dword-aligned
 * instructions. Note the methods are optimized to have the dword operations
 * performed with minimum overhead as the most frequently used ones.
 */
static int bt1_pcie_read_mmio(void __iomem *addr, int size, u32 *val)
{
	unsigned int ofs = (uintptr_t)addr & 0x3;

	if (!IS_ALIGNED((uintptr_t)addr, size))
		return -EINVAL;

	*val = readl(addr - ofs) >> ofs * BITS_PER_BYTE;
	if (size == 4) {
		return 0;
	} else if (size == 2) {
		*val &= 0xffff;
		return 0;
	} else if (size == 1) {
		*val &= 0xff;
		return 0;
	}

	return -EINVAL;
}

static int bt1_pcie_write_mmio(void __iomem *addr, int size, u32 val)
{
	unsigned int ofs = (uintptr_t)addr & 0x3;
	u32 tmp, mask;

	if (!IS_ALIGNED((uintptr_t)addr, size))
		return -EINVAL;

	if (size == 4) {
		writel(val, addr);
		return 0;
	} else if (size == 2 || size == 1) {
		mask = GENMASK(size * BITS_PER_BYTE - 1, 0);
		tmp = readl(addr - ofs) & ~(mask << ofs * BITS_PER_BYTE);
		tmp |= (val & mask) << ofs * BITS_PER_BYTE;
		writel(tmp, addr - ofs);
		return 0;
	}

	return -EINVAL;
}

static u32 bt1_pcie_read_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg,
			     size_t size)
{
	int ret;
	u32 val;

	ret = bt1_pcie_read_mmio(base + reg, size, &val);
	if (ret) {
		dev_err(pci->dev, "Read DBI address failed\n");
		return ~0U;
	}

	return val;
}

static void bt1_pcie_write_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg,
			       size_t size, u32 val)
{
	int ret;

	ret = bt1_pcie_write_mmio(base + reg, size, val);
	if (ret)
		dev_err(pci->dev, "Write DBI address failed\n");
}

static void bt1_pcie_write_dbi2(struct dw_pcie *pci, void __iomem *base, u32 reg,
				size_t size, u32 val)
{
	struct bt1_pcie *btpci = to_bt1_pcie(pci);
	int ret;

	regmap_update_bits(btpci->sys_regs, BT1_CCU_PCIE_GENC,
			   BT1_CCU_PCIE_DBI2_MODE, BT1_CCU_PCIE_DBI2_MODE);

	ret = bt1_pcie_write_mmio(base + reg, size, val);
	if (ret)
		dev_err(pci->dev, "Write DBI2 address failed\n");

	regmap_update_bits(btpci->sys_regs, BT1_CCU_PCIE_GENC,
			   BT1_CCU_PCIE_DBI2_MODE, 0);
}

static int bt1_pcie_start_link(struct dw_pcie *pci)
{
	struct bt1_pcie *btpci = to_bt1_pcie(pci);
	u32 val;
	int ret;

	/*
	 * Enable LTSSM and make sure it was able to establish both PHY and
	 * data links. This procedure shall work fine to reach 2.5 GT/s speed.
	 */
	regmap_update_bits(btpci->sys_regs, BT1_CCU_PCIE_GENC,
			   BT1_CCU_PCIE_LTSSM_EN, BT1_CCU_PCIE_LTSSM_EN);

	ret = regmap_read_poll_timeout(btpci->sys_regs, BT1_CCU_PCIE_PMSC, val,
				       (val & BT1_CCU_PCIE_SMLH_LINKUP),
				       BT1_PCIE_LNK_DELAY_US, BT1_PCIE_LNK_TIMEOUT_US);
	if (ret) {
		dev_err(pci->dev, "LTSSM failed to set PHY link up\n");
		return ret;
	}

	ret = regmap_read_poll_timeout(btpci->sys_regs, BT1_CCU_PCIE_PMSC, val,
				       (val & BT1_CCU_PCIE_RDLH_LINKUP),
				       BT1_PCIE_LNK_DELAY_US, BT1_PCIE_LNK_TIMEOUT_US);
	if (ret) {
		dev_err(pci->dev, "LTSSM failed to set data link up\n");
		return ret;
	}

	/*
	 * Activate direct speed change after the link is established in an
	 * attempt to reach a higher bus performance (up to Gen.3 - 8.0 GT/s).
	 * This is required at least to get 8.0 GT/s speed.
	 */
	val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
	val |= PORT_LOGIC_SPEED_CHANGE;
	dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val);

	ret = regmap_read_poll_timeout(btpci->sys_regs, BT1_CCU_PCIE_PMSC, val,
				       BT1_CCU_PCIE_LTSSM_LINKUP(val),
				       BT1_PCIE_LNK_DELAY_US, BT1_PCIE_LNK_TIMEOUT_US);
	if (ret)
		dev_err(pci->dev, "LTSSM failed to get into L0 state\n");

	return ret;
}

static void bt1_pcie_stop_link(struct dw_pcie *pci)
{
	struct bt1_pcie *btpci = to_bt1_pcie(pci);

	regmap_update_bits(btpci->sys_regs, BT1_CCU_PCIE_GENC,
			   BT1_CCU_PCIE_LTSSM_EN, 0);
}

static const struct dw_pcie_ops bt1_pcie_ops = {
	.read_dbi = bt1_pcie_read_dbi,
	.write_dbi = bt1_pcie_write_dbi,
	.write_dbi2 = bt1_pcie_write_dbi2,
	.start_link = bt1_pcie_start_link,
	.stop_link = bt1_pcie_stop_link,
};

static struct pci_ops bt1_pci_ops = {
	.map_bus = dw_pcie_own_conf_map_bus,
	.read = pci_generic_config_read32,
	.write = pci_generic_config_write32,
};

static int bt1_pcie_get_resources(struct bt1_pcie *btpci)
{
	struct device *dev = btpci->dw.dev;
	int i;

	/* DBI access is supposed to be performed by the dword-aligned IOs */
	btpci->dw.pp.bridge->ops = &bt1_pci_ops;

	/* These CSRs are in MMIO so we won't check the regmap-methods status */
	btpci->sys_regs =
		syscon_regmap_lookup_by_phandle(dev->of_node, "baikal,bt1-syscon");
	if (IS_ERR(btpci->sys_regs))
		return dev_err_probe(dev, PTR_ERR(btpci->sys_regs),
				     "Failed to get syscon\n");

	/* Make sure all the required resources have been specified */
	for (i = 0; i < BT1_PCIE_NUM_APP_CLKS; i++) {
		if (!btpci->dw.app_clks[bt1_pcie_app_clks[i]].clk) {
			dev_err(dev, "App clocks set is incomplete\n");
			return -ENOENT;
		}
	}

	for (i = 0; i < BT1_PCIE_NUM_CORE_CLKS; i++) {
		if (!btpci->dw.core_clks[bt1_pcie_core_clks[i]].clk) {
			dev_err(dev, "Core clocks set is incomplete\n");
			return -ENOENT;
		}
	}

	for (i = 0; i < BT1_PCIE_NUM_APP_RSTS; i++) {
		if (!btpci->dw.app_rsts[bt1_pcie_app_rsts[i]].rstc) {
			dev_err(dev, "App resets set is incomplete\n");
			return -ENOENT;
		}
	}

	for (i = 0; i < BT1_PCIE_NUM_CORE_RSTS; i++) {
		if (!btpci->dw.core_rsts[bt1_pcie_core_rsts[i]].rstc) {
			dev_err(dev, "Core resets set is incomplete\n");
			return -ENOENT;
		}
	}

	return 0;
}

static void bt1_pcie_full_stop_bus(struct bt1_pcie *btpci, bool init)
{
	struct device *dev = btpci->dw.dev;
	struct dw_pcie *pci = &btpci->dw;
	int ret;

	/* Disable LTSSM for sure */
	regmap_update_bits(btpci->sys_regs, BT1_CCU_PCIE_GENC,
			   BT1_CCU_PCIE_LTSSM_EN, 0);

	/*
	 * Application reset controls are trigger-based so assert the core
	 * resets only.
	 */
	ret = reset_control_bulk_assert(DW_PCIE_NUM_CORE_RSTS, pci->core_rsts);
	if (ret)
		dev_err(dev, "Failed to assert core resets\n");

	/*
	 * Clocks are disabled by default at least in accordance with the clk
	 * enable counter value on init stage.
	 */
	if (!init) {
		clk_bulk_disable_unprepare(DW_PCIE_NUM_CORE_CLKS, pci->core_clks);

		clk_bulk_disable_unprepare(DW_PCIE_NUM_APP_CLKS, pci->app_clks);
	}

	/* The peripheral devices are unavailable anyway so reset them too */
	gpiod_set_value_cansleep(pci->pe_rst, 1);

	/* Make sure all the resets are settled */
	msleep(BT1_PCIE_RST_DELAY_MS);
}

/*
 * Implements the cold reset procedure in accordance with the reference manual
 * and available PM signals.
 */
static int bt1_pcie_cold_start_bus(struct bt1_pcie *btpci)
{
	struct device *dev = btpci->dw.dev;
	struct dw_pcie *pci = &btpci->dw;
	u32 val;
	int ret;

	/* First get out of the Power/Hot reset state */
	ret = reset_control_deassert(pci->core_rsts[DW_PCIE_PWR_RST].rstc);
	if (ret) {
		dev_err(dev, "Failed to deassert PHY reset\n");
		return ret;
	}

	ret = reset_control_deassert(pci->core_rsts[DW_PCIE_HOT_RST].rstc);
	if (ret) {
		dev_err(dev, "Failed to deassert hot reset\n");
		goto err_assert_pwr_rst;
	}

	/* Wait for the PM-core to stop requesting the PHY reset */
	ret = regmap_read_poll_timeout(btpci->sys_regs, BT1_CCU_PCIE_RSTC, val,
				       !(val & BT1_CCU_PCIE_REQ_PHY_RST),
				       BT1_PCIE_REQ_DELAY_US, BT1_PCIE_REQ_TIMEOUT_US);
	if (ret) {
		dev_err(dev, "Timed out waiting for PM to stop PHY resetting\n");
		goto err_assert_hot_rst;
	}

	ret = reset_control_deassert(pci->core_rsts[DW_PCIE_PHY_RST].rstc);
	if (ret) {
		dev_err(dev, "Failed to deassert PHY reset\n");
		goto err_assert_hot_rst;
	}

	/* Clocks can be now enabled, but the ref one is crucial at this stage */
	ret = clk_bulk_prepare_enable(DW_PCIE_NUM_APP_CLKS, pci->app_clks);
	if (ret) {
		dev_err(dev, "Failed to enable app clocks\n");
		goto err_assert_phy_rst;
	}

	ret = clk_bulk_prepare_enable(DW_PCIE_NUM_CORE_CLKS, pci->core_clks);
	if (ret) {
		dev_err(dev, "Failed to enable ref clocks\n");
		goto err_disable_app_clk;
	}

	/* Wait for the PM to stop requesting the controller core reset */
	ret = regmap_read_poll_timeout(btpci->sys_regs, BT1_CCU_PCIE_RSTC, val,
				       !(val & BT1_CCU_PCIE_REQ_CORE_RST),
				       BT1_PCIE_REQ_DELAY_US, BT1_PCIE_REQ_TIMEOUT_US);
	if (ret) {
		dev_err(dev, "Timed out waiting for PM to stop core resetting\n");
		goto err_disable_core_clk;
	}

	/* PCS-PIPE interface and controller core can be now activated */
	ret = reset_control_deassert(pci->core_rsts[DW_PCIE_PIPE_RST].rstc);
	if (ret) {
		dev_err(dev, "Failed to deassert PIPE reset\n");
		goto err_disable_core_clk;
	}

	ret = reset_control_deassert(pci->core_rsts[DW_PCIE_CORE_RST].rstc);
	if (ret) {
		dev_err(dev, "Failed to deassert core reset\n");
		goto err_assert_pipe_rst;
	}

	/* It's recommended to reset the core and application logic together */
	ret = reset_control_bulk_reset(DW_PCIE_NUM_APP_RSTS, pci->app_rsts);
	if (ret) {
		dev_err(dev, "Failed to reset app domain\n");
		goto err_assert_core_rst;
	}

	/* Sticky/Non-sticky CSR flags can be now unreset too */
	ret = reset_control_deassert(pci->core_rsts[DW_PCIE_STICKY_RST].rstc);
	if (ret) {
		dev_err(dev, "Failed to deassert sticky reset\n");
		goto err_assert_core_rst;
	}

	ret = reset_control_deassert(pci->core_rsts[DW_PCIE_NON_STICKY_RST].rstc);
	if (ret) {
		dev_err(dev, "Failed to deassert non-sticky reset\n");
		goto err_assert_sticky_rst;
	}

	/* Activate the PCIe bus peripheral devices */
	gpiod_set_value_cansleep(pci->pe_rst, 0);

	/* Make sure the state is settled (LTSSM is still disabled though) */
	usleep_range(BT1_PCIE_RUN_DELAY_US, BT1_PCIE_RUN_DELAY_US + 100);

	return 0;

err_assert_sticky_rst:
	reset_control_assert(pci->core_rsts[DW_PCIE_STICKY_RST].rstc);

err_assert_core_rst:
	reset_control_assert(pci->core_rsts[DW_PCIE_CORE_RST].rstc);

err_assert_pipe_rst:
	reset_control_assert(pci->core_rsts[DW_PCIE_PIPE_RST].rstc);

err_disable_core_clk:
	clk_bulk_disable_unprepare(DW_PCIE_NUM_CORE_CLKS, pci->core_clks);

err_disable_app_clk:
	clk_bulk_disable_unprepare(DW_PCIE_NUM_APP_CLKS, pci->app_clks);

err_assert_phy_rst:
	reset_control_assert(pci->core_rsts[DW_PCIE_PHY_RST].rstc);

err_assert_hot_rst:
	reset_control_assert(pci->core_rsts[DW_PCIE_HOT_RST].rstc);

err_assert_pwr_rst:
	reset_control_assert(pci->core_rsts[DW_PCIE_PWR_RST].rstc);

	return ret;
}

static int bt1_pcie_host_init(struct dw_pcie_rp *pp)
{
	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
	struct bt1_pcie *btpci = to_bt1_pcie(pci);
	int ret;

	ret = bt1_pcie_get_resources(btpci);
	if (ret)
		return ret;

	bt1_pcie_full_stop_bus(btpci, true);

	return bt1_pcie_cold_start_bus(btpci);
}

static void bt1_pcie_host_deinit(struct dw_pcie_rp *pp)
{
	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
	struct bt1_pcie *btpci = to_bt1_pcie(pci);

	bt1_pcie_full_stop_bus(btpci, false);
}

static const struct dw_pcie_host_ops bt1_pcie_host_ops = {
	.host_init = bt1_pcie_host_init,
	.host_deinit = bt1_pcie_host_deinit,
};

static struct bt1_pcie *bt1_pcie_create_data(struct platform_device *pdev)
{
	struct bt1_pcie *btpci;

	btpci = devm_kzalloc(&pdev->dev, sizeof(*btpci), GFP_KERNEL);
	if (!btpci)
		return ERR_PTR(-ENOMEM);

	btpci->pdev = pdev;

	platform_set_drvdata(pdev, btpci);

	return btpci;
}

static int bt1_pcie_add_port(struct bt1_pcie *btpci)
{
	struct device *dev = &btpci->pdev->dev;
	int ret;

	ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
	if (ret)
		return ret;

	btpci->dw.version = DW_PCIE_VER_460A;
	btpci->dw.dev = dev;
	btpci->dw.ops = &bt1_pcie_ops;

	btpci->dw.pp.num_vectors = MAX_MSI_IRQS;
	btpci->dw.pp.ops = &bt1_pcie_host_ops;

	dw_pcie_cap_set(&btpci->dw, REQ_RES);

	ret = dw_pcie_host_init(&btpci->dw.pp);

	return dev_err_probe(dev, ret, "Failed to initialize DWC PCIe host\n");
}

static void bt1_pcie_del_port(struct bt1_pcie *btpci)
{
	dw_pcie_host_deinit(&btpci->dw.pp);
}

static int bt1_pcie_probe(struct platform_device *pdev)
{
	struct bt1_pcie *btpci;

	btpci = bt1_pcie_create_data(pdev);
	if (IS_ERR(btpci))
		return PTR_ERR(btpci);

	return bt1_pcie_add_port(btpci);
}

static void bt1_pcie_remove(struct platform_device *pdev)
{
	struct bt1_pcie *btpci = platform_get_drvdata(pdev);

	bt1_pcie_del_port(btpci);
}

static const struct of_device_id bt1_pcie_of_match[] = {
	{ .compatible = "baikal,bt1-pcie" },
	{},
};
MODULE_DEVICE_TABLE(of, bt1_pcie_of_match);

static struct platform_driver bt1_pcie_driver = {
	.probe = bt1_pcie_probe,
	.remove_new = bt1_pcie_remove,
	.driver = {
		.name	= "bt1-pcie",
		.of_match_table = bt1_pcie_of_match,
	},
};
module_platform_driver(bt1_pcie_driver);

MODULE_AUTHOR("Serge Semin <Sergey.Semin@baikalelectronics.ru>");
MODULE_DESCRIPTION("Baikal-T1 PCIe driver");
MODULE_LICENSE("GPL");