summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial/mvebu-uart.c
blob: 0255646bc1752dd85b876694abbeaedb1909c87a (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
// SPDX-License-Identifier: GPL-2.0+
/*
* ***************************************************************************
* Marvell Armada-3700 Serial Driver
* Author: Wilson Ding <dingwei@marvell.com>
* Copyright (C) 2015 Marvell International Ltd.
* ***************************************************************************
*/

#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/math64.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>

/* Register Map */
#define UART_STD_RBR		0x00
#define UART_EXT_RBR		0x18

#define UART_STD_TSH		0x04
#define UART_EXT_TSH		0x1C

#define UART_STD_CTRL1		0x08
#define UART_EXT_CTRL1		0x04
#define  CTRL_SOFT_RST		BIT(31)
#define  CTRL_TXFIFO_RST	BIT(15)
#define  CTRL_RXFIFO_RST	BIT(14)
#define  CTRL_SND_BRK_SEQ	BIT(11)
#define  CTRL_BRK_DET_INT	BIT(3)
#define  CTRL_FRM_ERR_INT	BIT(2)
#define  CTRL_PAR_ERR_INT	BIT(1)
#define  CTRL_OVR_ERR_INT	BIT(0)
#define  CTRL_BRK_INT		(CTRL_BRK_DET_INT | CTRL_FRM_ERR_INT | \
				CTRL_PAR_ERR_INT | CTRL_OVR_ERR_INT)

#define UART_STD_CTRL2		UART_STD_CTRL1
#define UART_EXT_CTRL2		0x20
#define  CTRL_STD_TX_RDY_INT	BIT(5)
#define  CTRL_EXT_TX_RDY_INT	BIT(6)
#define  CTRL_STD_RX_RDY_INT	BIT(4)
#define  CTRL_EXT_RX_RDY_INT	BIT(5)

#define UART_STAT		0x0C
#define  STAT_TX_FIFO_EMP	BIT(13)
#define  STAT_TX_FIFO_FUL	BIT(11)
#define  STAT_TX_EMP		BIT(6)
#define  STAT_STD_TX_RDY	BIT(5)
#define  STAT_EXT_TX_RDY	BIT(15)
#define  STAT_STD_RX_RDY	BIT(4)
#define  STAT_EXT_RX_RDY	BIT(14)
#define  STAT_BRK_DET		BIT(3)
#define  STAT_FRM_ERR		BIT(2)
#define  STAT_PAR_ERR		BIT(1)
#define  STAT_OVR_ERR		BIT(0)
#define  STAT_BRK_ERR		(STAT_BRK_DET | STAT_FRM_ERR \
				 | STAT_PAR_ERR | STAT_OVR_ERR)

/*
 * Marvell Armada 3700 Functional Specifications describes that bit 21 of UART
 * Clock Control register controls UART1 and bit 20 controls UART2. But in
 * reality bit 21 controls UART2 and bit 20 controls UART1. This seems to be an
 * error in Marvell's documentation. Hence following CLK_DIS macros are swapped.
 */

#define UART_BRDV		0x10
/* These bits are located in UART1 address space and control UART2 */
#define  UART2_CLK_DIS		BIT(21)
/* These bits are located in UART1 address space and control UART1 */
#define  UART1_CLK_DIS		BIT(20)
/* These bits are located in UART1 address space and control both UARTs */
#define  CLK_NO_XTAL		BIT(19)
#define  CLK_TBG_DIV1_SHIFT	15
#define  CLK_TBG_DIV1_MASK	0x7
#define  CLK_TBG_DIV1_MAX	6
#define  CLK_TBG_DIV2_SHIFT	12
#define  CLK_TBG_DIV2_MASK	0x7
#define  CLK_TBG_DIV2_MAX	6
#define  CLK_TBG_SEL_SHIFT	10
#define  CLK_TBG_SEL_MASK	0x3
/* These bits are located in both UARTs address space */
#define  BRDV_BAUD_MASK         0x3FF
#define  BRDV_BAUD_MAX		BRDV_BAUD_MASK

#define UART_OSAMP		0x14
#define  OSAMP_DEFAULT_DIVISOR	16
#define  OSAMP_DIVISORS_MASK	0x3F3F3F3F
#define  OSAMP_MAX_DIVISOR	63

#define MVEBU_NR_UARTS		2

#define MVEBU_UART_TYPE		"mvebu-uart"
#define DRIVER_NAME		"mvebu_serial"

enum {
	/* Either there is only one summed IRQ... */
	UART_IRQ_SUM = 0,
	/* ...or there are two separate IRQ for RX and TX */
	UART_RX_IRQ = 0,
	UART_TX_IRQ,
	UART_IRQ_COUNT
};

/* Diverging register offsets */
struct uart_regs_layout {
	unsigned int rbr;
	unsigned int tsh;
	unsigned int ctrl;
	unsigned int intr;
};

/* Diverging flags */
struct uart_flags {
	unsigned int ctrl_tx_rdy_int;
	unsigned int ctrl_rx_rdy_int;
	unsigned int stat_tx_rdy;
	unsigned int stat_rx_rdy;
};

/* Driver data, a structure for each UART port */
struct mvebu_uart_driver_data {
	bool is_ext;
	struct uart_regs_layout regs;
	struct uart_flags flags;
};

/* Saved registers during suspend */
struct mvebu_uart_pm_regs {
	unsigned int rbr;
	unsigned int tsh;
	unsigned int ctrl;
	unsigned int intr;
	unsigned int stat;
	unsigned int brdv;
	unsigned int osamp;
};

/* MVEBU UART driver structure */
struct mvebu_uart {
	struct uart_port *port;
	struct clk *clk;
	int irq[UART_IRQ_COUNT];
	struct mvebu_uart_driver_data *data;
#if defined(CONFIG_PM)
	struct mvebu_uart_pm_regs pm_regs;
#endif /* CONFIG_PM */
};

static struct mvebu_uart *to_mvuart(struct uart_port *port)
{
	return (struct mvebu_uart *)port->private_data;
}

#define IS_EXTENDED(port) (to_mvuart(port)->data->is_ext)

#define UART_RBR(port) (to_mvuart(port)->data->regs.rbr)
#define UART_TSH(port) (to_mvuart(port)->data->regs.tsh)
#define UART_CTRL(port) (to_mvuart(port)->data->regs.ctrl)
#define UART_INTR(port) (to_mvuart(port)->data->regs.intr)

#define CTRL_TX_RDY_INT(port) (to_mvuart(port)->data->flags.ctrl_tx_rdy_int)
#define CTRL_RX_RDY_INT(port) (to_mvuart(port)->data->flags.ctrl_rx_rdy_int)
#define STAT_TX_RDY(port) (to_mvuart(port)->data->flags.stat_tx_rdy)
#define STAT_RX_RDY(port) (to_mvuart(port)->data->flags.stat_rx_rdy)

static struct uart_port mvebu_uart_ports[MVEBU_NR_UARTS];

static DEFINE_SPINLOCK(mvebu_uart_lock);

/* Core UART Driver Operations */
static unsigned int mvebu_uart_tx_empty(struct uart_port *port)
{
	unsigned long flags;
	unsigned int st;

	uart_port_lock_irqsave(port, &flags);
	st = readl(port->membase + UART_STAT);
	uart_port_unlock_irqrestore(port, flags);

	return (st & STAT_TX_EMP) ? TIOCSER_TEMT : 0;
}

static unsigned int mvebu_uart_get_mctrl(struct uart_port *port)
{
	return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
}

static void mvebu_uart_set_mctrl(struct uart_port *port,
				 unsigned int mctrl)
{
/*
 * Even if we do not support configuring the modem control lines, this
 * function must be proided to the serial core
 */
}

static void mvebu_uart_stop_tx(struct uart_port *port)
{
	unsigned int ctl = readl(port->membase + UART_INTR(port));

	ctl &= ~CTRL_TX_RDY_INT(port);
	writel(ctl, port->membase + UART_INTR(port));
}

static void mvebu_uart_start_tx(struct uart_port *port)
{
	unsigned int ctl;
	struct circ_buf *xmit = &port->state->xmit;

	if (IS_EXTENDED(port) && !uart_circ_empty(xmit)) {
		writel(xmit->buf[xmit->tail], port->membase + UART_TSH(port));
		uart_xmit_advance(port, 1);
	}

	ctl = readl(port->membase + UART_INTR(port));
	ctl |= CTRL_TX_RDY_INT(port);
	writel(ctl, port->membase + UART_INTR(port));
}

static void mvebu_uart_stop_rx(struct uart_port *port)
{
	unsigned int ctl;

	ctl = readl(port->membase + UART_CTRL(port));
	ctl &= ~CTRL_BRK_INT;
	writel(ctl, port->membase + UART_CTRL(port));

	ctl = readl(port->membase + UART_INTR(port));
	ctl &= ~CTRL_RX_RDY_INT(port);
	writel(ctl, port->membase + UART_INTR(port));
}

static void mvebu_uart_break_ctl(struct uart_port *port, int brk)
{
	unsigned int ctl;
	unsigned long flags;

	uart_port_lock_irqsave(port, &flags);
	ctl = readl(port->membase + UART_CTRL(port));
	if (brk == -1)
		ctl |= CTRL_SND_BRK_SEQ;
	else
		ctl &= ~CTRL_SND_BRK_SEQ;
	writel(ctl, port->membase + UART_CTRL(port));
	uart_port_unlock_irqrestore(port, flags);
}

static void mvebu_uart_rx_chars(struct uart_port *port, unsigned int status)
{
	struct tty_port *tport = &port->state->port;
	unsigned char ch = 0;
	char flag = 0;
	int ret;

	do {
		if (status & STAT_RX_RDY(port)) {
			ch = readl(port->membase + UART_RBR(port));
			ch &= 0xff;
			flag = TTY_NORMAL;
			port->icount.rx++;

			if (status & STAT_PAR_ERR)
				port->icount.parity++;
		}

		/*
		 * For UART2, error bits are not cleared on buffer read.
		 * This causes interrupt loop and system hang.
		 */
		if (IS_EXTENDED(port) && (status & STAT_BRK_ERR)) {
			ret = readl(port->membase + UART_STAT);
			ret |= STAT_BRK_ERR;
			writel(ret, port->membase + UART_STAT);
		}

		if (status & STAT_BRK_DET) {
			port->icount.brk++;
			status &= ~(STAT_FRM_ERR | STAT_PAR_ERR);
			if (uart_handle_break(port))
				goto ignore_char;
		}

		if (status & STAT_OVR_ERR)
			port->icount.overrun++;

		if (status & STAT_FRM_ERR)
			port->icount.frame++;

		if (uart_handle_sysrq_char(port, ch))
			goto ignore_char;

		if (status & port->ignore_status_mask & STAT_PAR_ERR)
			status &= ~STAT_RX_RDY(port);

		status &= port->read_status_mask;

		if (status & STAT_PAR_ERR)
			flag = TTY_PARITY;

		status &= ~port->ignore_status_mask;

		if (status & STAT_RX_RDY(port))
			tty_insert_flip_char(tport, ch, flag);

		if (status & STAT_BRK_DET)
			tty_insert_flip_char(tport, 0, TTY_BREAK);

		if (status & STAT_FRM_ERR)
			tty_insert_flip_char(tport, 0, TTY_FRAME);

		if (status & STAT_OVR_ERR)
			tty_insert_flip_char(tport, 0, TTY_OVERRUN);

ignore_char:
		status = readl(port->membase + UART_STAT);
	} while (status & (STAT_RX_RDY(port) | STAT_BRK_DET));

	tty_flip_buffer_push(tport);
}

static void mvebu_uart_tx_chars(struct uart_port *port, unsigned int status)
{
	u8 ch;

	uart_port_tx_limited(port, ch, port->fifosize,
		!(readl(port->membase + UART_STAT) & STAT_TX_FIFO_FUL),
		writel(ch, port->membase + UART_TSH(port)),
		({}));
}

static irqreturn_t mvebu_uart_isr(int irq, void *dev_id)
{
	struct uart_port *port = (struct uart_port *)dev_id;
	unsigned int st = readl(port->membase + UART_STAT);

	if (st & (STAT_RX_RDY(port) | STAT_OVR_ERR | STAT_FRM_ERR |
		  STAT_BRK_DET))
		mvebu_uart_rx_chars(port, st);

	if (st & STAT_TX_RDY(port))
		mvebu_uart_tx_chars(port, st);

	return IRQ_HANDLED;
}

static irqreturn_t mvebu_uart_rx_isr(int irq, void *dev_id)
{
	struct uart_port *port = (struct uart_port *)dev_id;
	unsigned int st = readl(port->membase + UART_STAT);

	if (st & (STAT_RX_RDY(port) | STAT_OVR_ERR | STAT_FRM_ERR |
			STAT_BRK_DET))
		mvebu_uart_rx_chars(port, st);

	return IRQ_HANDLED;
}

static irqreturn_t mvebu_uart_tx_isr(int irq, void *dev_id)
{
	struct uart_port *port = (struct uart_port *)dev_id;
	unsigned int st = readl(port->membase + UART_STAT);

	if (st & STAT_TX_RDY(port))
		mvebu_uart_tx_chars(port, st);

	return IRQ_HANDLED;
}

static int mvebu_uart_startup(struct uart_port *port)
{
	struct mvebu_uart *mvuart = to_mvuart(port);
	unsigned int ctl;
	int ret;

	writel(CTRL_TXFIFO_RST | CTRL_RXFIFO_RST,
	       port->membase + UART_CTRL(port));
	udelay(1);

	/* Clear the error bits of state register before IRQ request */
	ret = readl(port->membase + UART_STAT);
	ret |= STAT_BRK_ERR;
	writel(ret, port->membase + UART_STAT);

	writel(CTRL_BRK_INT, port->membase + UART_CTRL(port));

	ctl = readl(port->membase + UART_INTR(port));
	ctl |= CTRL_RX_RDY_INT(port);
	writel(ctl, port->membase + UART_INTR(port));

	if (!mvuart->irq[UART_TX_IRQ]) {
		/* Old bindings with just one interrupt (UART0 only) */
		ret = devm_request_irq(port->dev, mvuart->irq[UART_IRQ_SUM],
				       mvebu_uart_isr, port->irqflags,
				       dev_name(port->dev), port);
		if (ret) {
			dev_err(port->dev, "unable to request IRQ %d\n",
				mvuart->irq[UART_IRQ_SUM]);
			return ret;
		}
	} else {
		/* New bindings with an IRQ for RX and TX (both UART) */
		ret = devm_request_irq(port->dev, mvuart->irq[UART_RX_IRQ],
				       mvebu_uart_rx_isr, port->irqflags,
				       dev_name(port->dev), port);
		if (ret) {
			dev_err(port->dev, "unable to request IRQ %d\n",
				mvuart->irq[UART_RX_IRQ]);
			return ret;
		}

		ret = devm_request_irq(port->dev, mvuart->irq[UART_TX_IRQ],
				       mvebu_uart_tx_isr, port->irqflags,
				       dev_name(port->dev),
				       port);
		if (ret) {
			dev_err(port->dev, "unable to request IRQ %d\n",
				mvuart->irq[UART_TX_IRQ]);
			devm_free_irq(port->dev, mvuart->irq[UART_RX_IRQ],
				      port);
			return ret;
		}
	}

	return 0;
}

static void mvebu_uart_shutdown(struct uart_port *port)
{
	struct mvebu_uart *mvuart = to_mvuart(port);

	writel(0, port->membase + UART_INTR(port));

	if (!mvuart->irq[UART_TX_IRQ]) {
		devm_free_irq(port->dev, mvuart->irq[UART_IRQ_SUM], port);
	} else {
		devm_free_irq(port->dev, mvuart->irq[UART_RX_IRQ], port);
		devm_free_irq(port->dev, mvuart->irq[UART_TX_IRQ], port);
	}
}

static unsigned int mvebu_uart_baud_rate_set(struct uart_port *port, unsigned int baud)
{
	unsigned int d_divisor, m_divisor;
	unsigned long flags;
	u32 brdv, osamp;

	if (!port->uartclk)
		return 0;

	/*
	 * The baudrate is derived from the UART clock thanks to divisors:
	 *   > d1 * d2 ("TBG divisors"): can divide only TBG clock from 1 to 6
	 *   > D ("baud generator"): can divide the clock from 1 to 1023
	 *   > M ("fractional divisor"): allows a better accuracy (from 1 to 63)
	 *
	 * Exact formulas for calculating baudrate:
	 *
	 * with default x16 scheme:
	 *   baudrate = xtal / (d * 16)
	 *   baudrate = tbg / (d1 * d2 * d * 16)
	 *
	 * with fractional divisor:
	 *   baudrate = 10 * xtal / (d * (3 * (m1 + m2) + 2 * (m3 + m4)))
	 *   baudrate = 10 * tbg / (d1*d2 * d * (3 * (m1 + m2) + 2 * (m3 + m4)))
	 *
	 * Oversampling value:
	 *   osamp = (m1 << 0) | (m2 << 8) | (m3 << 16) | (m4 << 24);
	 *
	 * Where m1 controls number of clock cycles per bit for bits 1,2,3;
	 * m2 for bits 4,5,6; m3 for bits 7,8 and m4 for bits 9,10.
	 *
	 * To simplify baudrate setup set all the M prescalers to the same
	 * value. For baudrates 9600 Bd and higher, it is enough to use the
	 * default (x16) divisor or fractional divisor with M = 63, so there
	 * is no need to use real fractional support (where the M prescalers
	 * are not equal).
	 *
	 * When all the M prescalers are zeroed then default (x16) divisor is
	 * used. Default x16 scheme is more stable than M (fractional divisor),
	 * so use M only when D divisor is not enough to derive baudrate.
	 *
	 * Member port->uartclk is either xtal clock rate or TBG clock rate
	 * divided by (d1 * d2). So d1 and d2 are already set by the UART clock
	 * driver (and UART driver itself cannot change them). Moreover they are
	 * shared between both UARTs.
	 */

	m_divisor = OSAMP_DEFAULT_DIVISOR;
	d_divisor = DIV_ROUND_CLOSEST(port->uartclk, baud * m_divisor);

	if (d_divisor > BRDV_BAUD_MAX) {
		/*
		 * Experiments show that small M divisors are unstable.
		 * Use maximal possible M = 63 and calculate D divisor.
		 */
		m_divisor = OSAMP_MAX_DIVISOR;
		d_divisor = DIV_ROUND_CLOSEST(port->uartclk, baud * m_divisor);
	}

	if (d_divisor < 1)
		d_divisor = 1;
	else if (d_divisor > BRDV_BAUD_MAX)
		d_divisor = BRDV_BAUD_MAX;

	spin_lock_irqsave(&mvebu_uart_lock, flags);
	brdv = readl(port->membase + UART_BRDV);
	brdv &= ~BRDV_BAUD_MASK;
	brdv |= d_divisor;
	writel(brdv, port->membase + UART_BRDV);
	spin_unlock_irqrestore(&mvebu_uart_lock, flags);

	osamp = readl(port->membase + UART_OSAMP);
	osamp &= ~OSAMP_DIVISORS_MASK;
	if (m_divisor != OSAMP_DEFAULT_DIVISOR)
		osamp |= (m_divisor << 0) | (m_divisor << 8) |
			(m_divisor << 16) | (m_divisor << 24);
	writel(osamp, port->membase + UART_OSAMP);

	return DIV_ROUND_CLOSEST(port->uartclk, d_divisor * m_divisor);
}

static void mvebu_uart_set_termios(struct uart_port *port,
				   struct ktermios *termios,
				   const struct ktermios *old)
{
	unsigned long flags;
	unsigned int baud, min_baud, max_baud;

	uart_port_lock_irqsave(port, &flags);

	port->read_status_mask = STAT_RX_RDY(port) | STAT_OVR_ERR |
		STAT_TX_RDY(port) | STAT_TX_FIFO_FUL;

	if (termios->c_iflag & INPCK)
		port->read_status_mask |= STAT_FRM_ERR | STAT_PAR_ERR;

	port->ignore_status_mask = 0;
	if (termios->c_iflag & IGNPAR)
		port->ignore_status_mask |=
			STAT_FRM_ERR | STAT_PAR_ERR | STAT_OVR_ERR;

	if ((termios->c_cflag & CREAD) == 0)
		port->ignore_status_mask |= STAT_RX_RDY(port) | STAT_BRK_ERR;

	/*
	 * Maximal divisor is 1023 and maximal fractional divisor is 63. And
	 * experiments show that baudrates above 1/80 of parent clock rate are
	 * not stable. So disallow baudrates above 1/80 of the parent clock
	 * rate. If port->uartclk is not available, then
	 * mvebu_uart_baud_rate_set() fails, so values min_baud and max_baud
	 * in this case do not matter.
	 */
	min_baud = DIV_ROUND_UP(port->uartclk, BRDV_BAUD_MAX *
				OSAMP_MAX_DIVISOR);
	max_baud = port->uartclk / 80;

	baud = uart_get_baud_rate(port, termios, old, min_baud, max_baud);
	baud = mvebu_uart_baud_rate_set(port, baud);

	/* In case baudrate cannot be changed, report previous old value */
	if (baud == 0 && old)
		baud = tty_termios_baud_rate(old);

	/* Only the following flag changes are supported */
	if (old) {
		termios->c_iflag &= INPCK | IGNPAR;
		termios->c_iflag |= old->c_iflag & ~(INPCK | IGNPAR);
		termios->c_cflag &= CREAD | CBAUD;
		termios->c_cflag |= old->c_cflag & ~(CREAD | CBAUD);
		termios->c_cflag |= CS8;
	}

	if (baud != 0) {
		tty_termios_encode_baud_rate(termios, baud, baud);
		uart_update_timeout(port, termios->c_cflag, baud);
	}

	uart_port_unlock_irqrestore(port, flags);
}

static const char *mvebu_uart_type(struct uart_port *port)
{
	return MVEBU_UART_TYPE;
}

static void mvebu_uart_release_port(struct uart_port *port)
{
	/* Nothing to do here */
}

static int mvebu_uart_request_port(struct uart_port *port)
{
	return 0;
}

#ifdef CONFIG_CONSOLE_POLL
static int mvebu_uart_get_poll_char(struct uart_port *port)
{
	unsigned int st = readl(port->membase + UART_STAT);

	if (!(st & STAT_RX_RDY(port)))
		return NO_POLL_CHAR;

	return readl(port->membase + UART_RBR(port));
}

static void mvebu_uart_put_poll_char(struct uart_port *port, unsigned char c)
{
	unsigned int st;

	for (;;) {
		st = readl(port->membase + UART_STAT);

		if (!(st & STAT_TX_FIFO_FUL))
			break;

		udelay(1);
	}

	writel(c, port->membase + UART_TSH(port));
}
#endif

static const struct uart_ops mvebu_uart_ops = {
	.tx_empty	= mvebu_uart_tx_empty,
	.set_mctrl	= mvebu_uart_set_mctrl,
	.get_mctrl	= mvebu_uart_get_mctrl,
	.stop_tx	= mvebu_uart_stop_tx,
	.start_tx	= mvebu_uart_start_tx,
	.stop_rx	= mvebu_uart_stop_rx,
	.break_ctl	= mvebu_uart_break_ctl,
	.startup	= mvebu_uart_startup,
	.shutdown	= mvebu_uart_shutdown,
	.set_termios	= mvebu_uart_set_termios,
	.type		= mvebu_uart_type,
	.release_port	= mvebu_uart_release_port,
	.request_port	= mvebu_uart_request_port,
#ifdef CONFIG_CONSOLE_POLL
	.poll_get_char	= mvebu_uart_get_poll_char,
	.poll_put_char	= mvebu_uart_put_poll_char,
#endif
};

/* Console Driver Operations  */

#ifdef CONFIG_SERIAL_MVEBU_CONSOLE
/* Early Console */
static void mvebu_uart_putc(struct uart_port *port, unsigned char c)
{
	unsigned int st;

	for (;;) {
		st = readl(port->membase + UART_STAT);
		if (!(st & STAT_TX_FIFO_FUL))
			break;
	}

	/* At early stage, DT is not parsed yet, only use UART0 */
	writel(c, port->membase + UART_STD_TSH);

	for (;;) {
		st = readl(port->membase + UART_STAT);
		if (st & STAT_TX_FIFO_EMP)
			break;
	}
}

static void mvebu_uart_putc_early_write(struct console *con,
					const char *s,
					unsigned int n)
{
	struct earlycon_device *dev = con->data;

	uart_console_write(&dev->port, s, n, mvebu_uart_putc);
}

static int __init
mvebu_uart_early_console_setup(struct earlycon_device *device,
			       const char *opt)
{
	if (!device->port.membase)
		return -ENODEV;

	device->con->write = mvebu_uart_putc_early_write;

	return 0;
}

EARLYCON_DECLARE(ar3700_uart, mvebu_uart_early_console_setup);
OF_EARLYCON_DECLARE(ar3700_uart, "marvell,armada-3700-uart",
		    mvebu_uart_early_console_setup);

static void wait_for_xmitr(struct uart_port *port)
{
	u32 val;

	readl_poll_timeout_atomic(port->membase + UART_STAT, val,
				  (val & STAT_TX_RDY(port)), 1, 10000);
}

static void wait_for_xmite(struct uart_port *port)
{
	u32 val;

	readl_poll_timeout_atomic(port->membase + UART_STAT, val,
				  (val & STAT_TX_EMP), 1, 10000);
}

static void mvebu_uart_console_putchar(struct uart_port *port, unsigned char ch)
{
	wait_for_xmitr(port);
	writel(ch, port->membase + UART_TSH(port));
}

static void mvebu_uart_console_write(struct console *co, const char *s,
				     unsigned int count)
{
	struct uart_port *port = &mvebu_uart_ports[co->index];
	unsigned long flags;
	unsigned int ier, intr, ctl;
	int locked = 1;

	if (oops_in_progress)
		locked = uart_port_trylock_irqsave(port, &flags);
	else
		uart_port_lock_irqsave(port, &flags);

	ier = readl(port->membase + UART_CTRL(port)) & CTRL_BRK_INT;
	intr = readl(port->membase + UART_INTR(port)) &
		(CTRL_RX_RDY_INT(port) | CTRL_TX_RDY_INT(port));
	writel(0, port->membase + UART_CTRL(port));
	writel(0, port->membase + UART_INTR(port));

	uart_console_write(port, s, count, mvebu_uart_console_putchar);

	wait_for_xmite(port);

	if (ier)
		writel(ier, port->membase + UART_CTRL(port));

	if (intr) {
		ctl = intr | readl(port->membase + UART_INTR(port));
		writel(ctl, port->membase + UART_INTR(port));
	}

	if (locked)
		uart_port_unlock_irqrestore(port, flags);
}

static int mvebu_uart_console_setup(struct console *co, char *options)
{
	struct uart_port *port;
	int baud = 9600;
	int bits = 8;
	int parity = 'n';
	int flow = 'n';

	if (co->index < 0 || co->index >= MVEBU_NR_UARTS)
		return -EINVAL;

	port = &mvebu_uart_ports[co->index];

	if (!port->mapbase || !port->membase) {
		pr_debug("console on ttyMV%i not present\n", co->index);
		return -ENODEV;
	}

	if (options)
		uart_parse_options(options, &baud, &parity, &bits, &flow);

	return uart_set_options(port, co, baud, parity, bits, flow);
}

static struct uart_driver mvebu_uart_driver;

static struct console mvebu_uart_console = {
	.name	= "ttyMV",
	.write	= mvebu_uart_console_write,
	.device	= uart_console_device,
	.setup	= mvebu_uart_console_setup,
	.flags	= CON_PRINTBUFFER,
	.index	= -1,
	.data	= &mvebu_uart_driver,
};

static int __init mvebu_uart_console_init(void)
{
	register_console(&mvebu_uart_console);
	return 0;
}

console_initcall(mvebu_uart_console_init);


#endif /* CONFIG_SERIAL_MVEBU_CONSOLE */

static struct uart_driver mvebu_uart_driver = {
	.owner			= THIS_MODULE,
	.driver_name		= DRIVER_NAME,
	.dev_name		= "ttyMV",
	.nr			= MVEBU_NR_UARTS,
#ifdef CONFIG_SERIAL_MVEBU_CONSOLE
	.cons			= &mvebu_uart_console,
#endif
};

#if defined(CONFIG_PM)
static int mvebu_uart_suspend(struct device *dev)
{
	struct mvebu_uart *mvuart = dev_get_drvdata(dev);
	struct uart_port *port = mvuart->port;
	unsigned long flags;

	uart_suspend_port(&mvebu_uart_driver, port);

	mvuart->pm_regs.rbr = readl(port->membase + UART_RBR(port));
	mvuart->pm_regs.tsh = readl(port->membase + UART_TSH(port));
	mvuart->pm_regs.ctrl = readl(port->membase + UART_CTRL(port));
	mvuart->pm_regs.intr = readl(port->membase + UART_INTR(port));
	mvuart->pm_regs.stat = readl(port->membase + UART_STAT);
	spin_lock_irqsave(&mvebu_uart_lock, flags);
	mvuart->pm_regs.brdv = readl(port->membase + UART_BRDV);
	spin_unlock_irqrestore(&mvebu_uart_lock, flags);
	mvuart->pm_regs.osamp = readl(port->membase + UART_OSAMP);

	device_set_wakeup_enable(dev, true);

	return 0;
}

static int mvebu_uart_resume(struct device *dev)
{
	struct mvebu_uart *mvuart = dev_get_drvdata(dev);
	struct uart_port *port = mvuart->port;
	unsigned long flags;

	writel(mvuart->pm_regs.rbr, port->membase + UART_RBR(port));
	writel(mvuart->pm_regs.tsh, port->membase + UART_TSH(port));
	writel(mvuart->pm_regs.ctrl, port->membase + UART_CTRL(port));
	writel(mvuart->pm_regs.intr, port->membase + UART_INTR(port));
	writel(mvuart->pm_regs.stat, port->membase + UART_STAT);
	spin_lock_irqsave(&mvebu_uart_lock, flags);
	writel(mvuart->pm_regs.brdv, port->membase + UART_BRDV);
	spin_unlock_irqrestore(&mvebu_uart_lock, flags);
	writel(mvuart->pm_regs.osamp, port->membase + UART_OSAMP);

	uart_resume_port(&mvebu_uart_driver, port);

	return 0;
}

static const struct dev_pm_ops mvebu_uart_pm_ops = {
	.suspend        = mvebu_uart_suspend,
	.resume         = mvebu_uart_resume,
};
#endif /* CONFIG_PM */

static const struct of_device_id mvebu_uart_of_match[];

/* Counter to keep track of each UART port id when not using CONFIG_OF */
static int uart_num_counter;

static int mvebu_uart_probe(struct platform_device *pdev)
{
	const struct of_device_id *match = of_match_device(mvebu_uart_of_match,
							   &pdev->dev);
	struct uart_port *port;
	struct mvebu_uart *mvuart;
	struct resource *reg;
	int id, irq;

	/* Assume that all UART ports have a DT alias or none has */
	id = of_alias_get_id(pdev->dev.of_node, "serial");
	if (!pdev->dev.of_node || id < 0)
		pdev->id = uart_num_counter++;
	else
		pdev->id = id;

	if (pdev->id >= MVEBU_NR_UARTS) {
		dev_err(&pdev->dev, "cannot have more than %d UART ports\n",
			MVEBU_NR_UARTS);
		return -EINVAL;
	}

	port = &mvebu_uart_ports[pdev->id];

	spin_lock_init(&port->lock);

	port->dev        = &pdev->dev;
	port->type       = PORT_MVEBU;
	port->ops        = &mvebu_uart_ops;
	port->regshift   = 0;

	port->fifosize   = 32;
	port->iotype     = UPIO_MEM32;
	port->flags      = UPF_FIXED_PORT;
	port->line       = pdev->id;

	/*
	 * IRQ number is not stored in this structure because we may have two of
	 * them per port (RX and TX). Instead, use the driver UART structure
	 * array so called ->irq[].
	 */
	port->irq        = 0;
	port->irqflags   = 0;

	port->membase = devm_platform_get_and_ioremap_resource(pdev, 0, &reg);
	if (IS_ERR(port->membase))
		return PTR_ERR(port->membase);
	port->mapbase    = reg->start;

	mvuart = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_uart),
			      GFP_KERNEL);
	if (!mvuart)
		return -ENOMEM;

	/* Get controller data depending on the compatible string */
	mvuart->data = (struct mvebu_uart_driver_data *)match->data;
	mvuart->port = port;

	port->private_data = mvuart;
	platform_set_drvdata(pdev, mvuart);

	/* Get fixed clock frequency */
	mvuart->clk = devm_clk_get(&pdev->dev, NULL);
	if (IS_ERR(mvuart->clk)) {
		if (PTR_ERR(mvuart->clk) == -EPROBE_DEFER)
			return PTR_ERR(mvuart->clk);

		if (IS_EXTENDED(port)) {
			dev_err(&pdev->dev, "unable to get UART clock\n");
			return PTR_ERR(mvuart->clk);
		}
	} else {
		if (!clk_prepare_enable(mvuart->clk))
			port->uartclk = clk_get_rate(mvuart->clk);
	}

	/* Manage interrupts */
	if (platform_irq_count(pdev) == 1) {
		/* Old bindings: no name on the single unamed UART0 IRQ */
		irq = platform_get_irq(pdev, 0);
		if (irq < 0)
			return irq;

		mvuart->irq[UART_IRQ_SUM] = irq;
	} else {
		/*
		 * New bindings: named interrupts (RX, TX) for both UARTS,
		 * only make use of uart-rx and uart-tx interrupts, do not use
		 * uart-sum of UART0 port.
		 */
		irq = platform_get_irq_byname(pdev, "uart-rx");
		if (irq < 0)
			return irq;

		mvuart->irq[UART_RX_IRQ] = irq;

		irq = platform_get_irq_byname(pdev, "uart-tx");
		if (irq < 0)
			return irq;

		mvuart->irq[UART_TX_IRQ] = irq;
	}

	/* UART Soft Reset*/
	writel(CTRL_SOFT_RST, port->membase + UART_CTRL(port));
	udelay(1);
	writel(0, port->membase + UART_CTRL(port));

	return uart_add_one_port(&mvebu_uart_driver, port);
}

static struct mvebu_uart_driver_data uart_std_driver_data = {
	.is_ext = false,
	.regs.rbr = UART_STD_RBR,
	.regs.tsh = UART_STD_TSH,
	.regs.ctrl = UART_STD_CTRL1,
	.regs.intr = UART_STD_CTRL2,
	.flags.ctrl_tx_rdy_int = CTRL_STD_TX_RDY_INT,
	.flags.ctrl_rx_rdy_int = CTRL_STD_RX_RDY_INT,
	.flags.stat_tx_rdy = STAT_STD_TX_RDY,
	.flags.stat_rx_rdy = STAT_STD_RX_RDY,
};

static struct mvebu_uart_driver_data uart_ext_driver_data = {
	.is_ext = true,
	.regs.rbr = UART_EXT_RBR,
	.regs.tsh = UART_EXT_TSH,
	.regs.ctrl = UART_EXT_CTRL1,
	.regs.intr = UART_EXT_CTRL2,
	.flags.ctrl_tx_rdy_int = CTRL_EXT_TX_RDY_INT,
	.flags.ctrl_rx_rdy_int = CTRL_EXT_RX_RDY_INT,
	.flags.stat_tx_rdy = STAT_EXT_TX_RDY,
	.flags.stat_rx_rdy = STAT_EXT_RX_RDY,
};

/* Match table for of_platform binding */
static const struct of_device_id mvebu_uart_of_match[] = {
	{
		.compatible = "marvell,armada-3700-uart",
		.data = (void *)&uart_std_driver_data,
	},
	{
		.compatible = "marvell,armada-3700-uart-ext",
		.data = (void *)&uart_ext_driver_data,
	},
	{}
};

static struct platform_driver mvebu_uart_platform_driver = {
	.probe	= mvebu_uart_probe,
	.driver	= {
		.name  = "mvebu-uart",
		.of_match_table = of_match_ptr(mvebu_uart_of_match),
		.suppress_bind_attrs = true,
#if defined(CONFIG_PM)
		.pm	= &mvebu_uart_pm_ops,
#endif /* CONFIG_PM */
	},
};

/* This code is based on clk-fixed-factor.c driver and modified. */

struct mvebu_uart_clock {
	struct clk_hw clk_hw;
	int clock_idx;
	u32 pm_context_reg1;
	u32 pm_context_reg2;
};

struct mvebu_uart_clock_base {
	struct mvebu_uart_clock clocks[2];
	unsigned int parent_rates[5];
	int parent_idx;
	unsigned int div;
	void __iomem *reg1;
	void __iomem *reg2;
	bool configured;
};

#define PARENT_CLOCK_XTAL 4

#define to_uart_clock(hw) container_of(hw, struct mvebu_uart_clock, clk_hw)
#define to_uart_clock_base(uart_clock) container_of(uart_clock, \
	struct mvebu_uart_clock_base, clocks[uart_clock->clock_idx])

static int mvebu_uart_clock_prepare(struct clk_hw *hw)
{
	struct mvebu_uart_clock *uart_clock = to_uart_clock(hw);
	struct mvebu_uart_clock_base *uart_clock_base =
						to_uart_clock_base(uart_clock);
	unsigned int prev_clock_idx, prev_clock_rate, prev_d1d2;
	unsigned int parent_clock_idx, parent_clock_rate;
	unsigned long flags;
	unsigned int d1, d2;
	u64 divisor;
	u32 val;

	/*
	 * This function just reconfigures UART Clock Control register (located
	 * in UART1 address space which controls both UART1 and UART2) to
	 * selected UART base clock and recalculates current UART1/UART2
	 * divisors in their address spaces, so that final baudrate will not be
	 * changed by switching UART parent clock. This is required for
	 * otherwise kernel's boot log stops working - we need to ensure that
	 * UART baudrate does not change during this setup. It is a one time
	 * operation, it will execute only once and set `configured` to true,
	 * and be skipped on subsequent calls. Because this UART Clock Control
	 * register (UART_BRDV) is shared between UART1 baudrate function,
	 * UART1 clock selector and UART2 clock selector, every access to
	 * UART_BRDV (reg1) needs to be protected by a lock.
	 */

	spin_lock_irqsave(&mvebu_uart_lock, flags);

	if (uart_clock_base->configured) {
		spin_unlock_irqrestore(&mvebu_uart_lock, flags);
		return 0;
	}

	parent_clock_idx = uart_clock_base->parent_idx;
	parent_clock_rate = uart_clock_base->parent_rates[parent_clock_idx];

	val = readl(uart_clock_base->reg1);

	if (uart_clock_base->div > CLK_TBG_DIV1_MAX) {
		d1 = CLK_TBG_DIV1_MAX;
		d2 = uart_clock_base->div / CLK_TBG_DIV1_MAX;
	} else {
		d1 = uart_clock_base->div;
		d2 = 1;
	}

	if (val & CLK_NO_XTAL) {
		prev_clock_idx = (val >> CLK_TBG_SEL_SHIFT) & CLK_TBG_SEL_MASK;
		prev_d1d2 = ((val >> CLK_TBG_DIV1_SHIFT) & CLK_TBG_DIV1_MASK) *
			    ((val >> CLK_TBG_DIV2_SHIFT) & CLK_TBG_DIV2_MASK);
	} else {
		prev_clock_idx = PARENT_CLOCK_XTAL;
		prev_d1d2 = 1;
	}

	/* Note that uart_clock_base->parent_rates[i] may not be available */
	prev_clock_rate = uart_clock_base->parent_rates[prev_clock_idx];

	/* Recalculate UART1 divisor so UART1 baudrate does not change */
	if (prev_clock_rate) {
		divisor = DIV_U64_ROUND_CLOSEST((u64)(val & BRDV_BAUD_MASK) *
						parent_clock_rate * prev_d1d2,
						prev_clock_rate * d1 * d2);
		if (divisor < 1)
			divisor = 1;
		else if (divisor > BRDV_BAUD_MAX)
			divisor = BRDV_BAUD_MAX;
		val = (val & ~BRDV_BAUD_MASK) | divisor;
	}

	if (parent_clock_idx != PARENT_CLOCK_XTAL) {
		/* Do not use XTAL, select TBG clock and TBG d1 * d2 divisors */
		val |= CLK_NO_XTAL;
		val &= ~(CLK_TBG_DIV1_MASK << CLK_TBG_DIV1_SHIFT);
		val |= d1 << CLK_TBG_DIV1_SHIFT;
		val &= ~(CLK_TBG_DIV2_MASK << CLK_TBG_DIV2_SHIFT);
		val |= d2 << CLK_TBG_DIV2_SHIFT;
		val &= ~(CLK_TBG_SEL_MASK << CLK_TBG_SEL_SHIFT);
		val |= parent_clock_idx << CLK_TBG_SEL_SHIFT;
	} else {
		/* Use XTAL, TBG bits are then ignored */
		val &= ~CLK_NO_XTAL;
	}

	writel(val, uart_clock_base->reg1);

	/* Recalculate UART2 divisor so UART2 baudrate does not change */
	if (prev_clock_rate) {
		val = readl(uart_clock_base->reg2);
		divisor = DIV_U64_ROUND_CLOSEST((u64)(val & BRDV_BAUD_MASK) *
						parent_clock_rate * prev_d1d2,
						prev_clock_rate * d1 * d2);
		if (divisor < 1)
			divisor = 1;
		else if (divisor > BRDV_BAUD_MAX)
			divisor = BRDV_BAUD_MAX;
		val = (val & ~BRDV_BAUD_MASK) | divisor;
		writel(val, uart_clock_base->reg2);
	}

	uart_clock_base->configured = true;

	spin_unlock_irqrestore(&mvebu_uart_lock, flags);

	return 0;
}

static int mvebu_uart_clock_enable(struct clk_hw *hw)
{
	struct mvebu_uart_clock *uart_clock = to_uart_clock(hw);
	struct mvebu_uart_clock_base *uart_clock_base =
						to_uart_clock_base(uart_clock);
	unsigned long flags;
	u32 val;

	spin_lock_irqsave(&mvebu_uart_lock, flags);

	val = readl(uart_clock_base->reg1);

	if (uart_clock->clock_idx == 0)
		val &= ~UART1_CLK_DIS;
	else
		val &= ~UART2_CLK_DIS;

	writel(val, uart_clock_base->reg1);

	spin_unlock_irqrestore(&mvebu_uart_lock, flags);

	return 0;
}

static void mvebu_uart_clock_disable(struct clk_hw *hw)
{
	struct mvebu_uart_clock *uart_clock = to_uart_clock(hw);
	struct mvebu_uart_clock_base *uart_clock_base =
						to_uart_clock_base(uart_clock);
	unsigned long flags;
	u32 val;

	spin_lock_irqsave(&mvebu_uart_lock, flags);

	val = readl(uart_clock_base->reg1);

	if (uart_clock->clock_idx == 0)
		val |= UART1_CLK_DIS;
	else
		val |= UART2_CLK_DIS;

	writel(val, uart_clock_base->reg1);

	spin_unlock_irqrestore(&mvebu_uart_lock, flags);
}

static int mvebu_uart_clock_is_enabled(struct clk_hw *hw)
{
	struct mvebu_uart_clock *uart_clock = to_uart_clock(hw);
	struct mvebu_uart_clock_base *uart_clock_base =
						to_uart_clock_base(uart_clock);
	u32 val;

	val = readl(uart_clock_base->reg1);

	if (uart_clock->clock_idx == 0)
		return !(val & UART1_CLK_DIS);
	else
		return !(val & UART2_CLK_DIS);
}

static int mvebu_uart_clock_save_context(struct clk_hw *hw)
{
	struct mvebu_uart_clock *uart_clock = to_uart_clock(hw);
	struct mvebu_uart_clock_base *uart_clock_base =
						to_uart_clock_base(uart_clock);
	unsigned long flags;

	spin_lock_irqsave(&mvebu_uart_lock, flags);
	uart_clock->pm_context_reg1 = readl(uart_clock_base->reg1);
	uart_clock->pm_context_reg2 = readl(uart_clock_base->reg2);
	spin_unlock_irqrestore(&mvebu_uart_lock, flags);

	return 0;
}

static void mvebu_uart_clock_restore_context(struct clk_hw *hw)
{
	struct mvebu_uart_clock *uart_clock = to_uart_clock(hw);
	struct mvebu_uart_clock_base *uart_clock_base =
						to_uart_clock_base(uart_clock);
	unsigned long flags;

	spin_lock_irqsave(&mvebu_uart_lock, flags);
	writel(uart_clock->pm_context_reg1, uart_clock_base->reg1);
	writel(uart_clock->pm_context_reg2, uart_clock_base->reg2);
	spin_unlock_irqrestore(&mvebu_uart_lock, flags);
}

static unsigned long mvebu_uart_clock_recalc_rate(struct clk_hw *hw,
						  unsigned long parent_rate)
{
	struct mvebu_uart_clock *uart_clock = to_uart_clock(hw);
	struct mvebu_uart_clock_base *uart_clock_base =
						to_uart_clock_base(uart_clock);

	return parent_rate / uart_clock_base->div;
}

static long mvebu_uart_clock_round_rate(struct clk_hw *hw, unsigned long rate,
					unsigned long *parent_rate)
{
	struct mvebu_uart_clock *uart_clock = to_uart_clock(hw);
	struct mvebu_uart_clock_base *uart_clock_base =
						to_uart_clock_base(uart_clock);

	return *parent_rate / uart_clock_base->div;
}

static int mvebu_uart_clock_set_rate(struct clk_hw *hw, unsigned long rate,
				     unsigned long parent_rate)
{
	/*
	 * We must report success but we can do so unconditionally because
	 * mvebu_uart_clock_round_rate returns values that ensure this call is a
	 * nop.
	 */

	return 0;
}

static const struct clk_ops mvebu_uart_clock_ops = {
	.prepare = mvebu_uart_clock_prepare,
	.enable = mvebu_uart_clock_enable,
	.disable = mvebu_uart_clock_disable,
	.is_enabled = mvebu_uart_clock_is_enabled,
	.save_context = mvebu_uart_clock_save_context,
	.restore_context = mvebu_uart_clock_restore_context,
	.round_rate = mvebu_uart_clock_round_rate,
	.set_rate = mvebu_uart_clock_set_rate,
	.recalc_rate = mvebu_uart_clock_recalc_rate,
};

static int mvebu_uart_clock_register(struct device *dev,
				     struct mvebu_uart_clock *uart_clock,
				     const char *name,
				     const char *parent_name)
{
	struct clk_init_data init = { };

	uart_clock->clk_hw.init = &init;

	init.name = name;
	init.ops = &mvebu_uart_clock_ops;
	init.flags = 0;
	init.num_parents = 1;
	init.parent_names = &parent_name;

	return devm_clk_hw_register(dev, &uart_clock->clk_hw);
}

static int mvebu_uart_clock_probe(struct platform_device *pdev)
{
	static const char *const uart_clk_names[] = { "uart_1", "uart_2" };
	static const char *const parent_clk_names[] = { "TBG-A-P", "TBG-B-P",
							"TBG-A-S", "TBG-B-S",
							"xtal" };
	struct clk *parent_clks[ARRAY_SIZE(parent_clk_names)];
	struct mvebu_uart_clock_base *uart_clock_base;
	struct clk_hw_onecell_data *hw_clk_data;
	struct device *dev = &pdev->dev;
	int i, parent_clk_idx, ret;
	unsigned long div, rate;
	struct resource *res;
	unsigned int d1, d2;

	BUILD_BUG_ON(ARRAY_SIZE(uart_clk_names) !=
		     ARRAY_SIZE(uart_clock_base->clocks));
	BUILD_BUG_ON(ARRAY_SIZE(parent_clk_names) !=
		     ARRAY_SIZE(uart_clock_base->parent_rates));

	uart_clock_base = devm_kzalloc(dev,
				       sizeof(*uart_clock_base),
				       GFP_KERNEL);
	if (!uart_clock_base)
		return -ENOMEM;

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!res) {
		dev_err(dev, "Couldn't get first register\n");
		return -ENOENT;
	}

	/*
	 * UART Clock Control register (reg1 / UART_BRDV) is in the address
	 * space of UART1 (standard UART variant), controls parent clock and
	 * dividers for both UART1 and UART2 and is supplied via DT as the first
	 * resource. Therefore use ioremap() rather than ioremap_resource() to
	 * avoid conflicts with UART1 driver. Access to UART_BRDV is protected
	 * by a lock shared between clock and UART driver.
	 */
	uart_clock_base->reg1 = devm_ioremap(dev, res->start,
					     resource_size(res));
	if (!uart_clock_base->reg1)
		return -ENOMEM;

	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
	if (!res) {
		dev_err(dev, "Couldn't get second register\n");
		return -ENOENT;
	}

	/*
	 * UART 2 Baud Rate Divisor register (reg2 / UART_BRDV) is in address
	 * space of UART2 (extended UART variant), controls only one UART2
	 * specific divider and is supplied via DT as second resource.
	 * Therefore use ioremap() rather than ioremap_resource() to avoid
	 * conflicts with UART2 driver. Access to UART_BRDV is protected by a
	 * by lock shared between clock and UART driver.
	 */
	uart_clock_base->reg2 = devm_ioremap(dev, res->start,
					     resource_size(res));
	if (!uart_clock_base->reg2)
		return -ENOMEM;

	hw_clk_data = devm_kzalloc(dev,
				   struct_size(hw_clk_data, hws,
					       ARRAY_SIZE(uart_clk_names)),
				   GFP_KERNEL);
	if (!hw_clk_data)
		return -ENOMEM;

	hw_clk_data->num = ARRAY_SIZE(uart_clk_names);
	for (i = 0; i < ARRAY_SIZE(uart_clk_names); i++) {
		hw_clk_data->hws[i] = &uart_clock_base->clocks[i].clk_hw;
		uart_clock_base->clocks[i].clock_idx = i;
	}

	parent_clk_idx = -1;

	for (i = 0; i < ARRAY_SIZE(parent_clk_names); i++) {
		parent_clks[i] = devm_clk_get(dev, parent_clk_names[i]);
		if (IS_ERR(parent_clks[i])) {
			if (PTR_ERR(parent_clks[i]) == -EPROBE_DEFER)
				return -EPROBE_DEFER;
			dev_warn(dev, "Couldn't get the parent clock %s: %ld\n",
				 parent_clk_names[i], PTR_ERR(parent_clks[i]));
			continue;
		}

		ret = clk_prepare_enable(parent_clks[i]);
		if (ret) {
			dev_warn(dev, "Couldn't enable parent clock %s: %d\n",
				 parent_clk_names[i], ret);
			continue;
		}
		rate = clk_get_rate(parent_clks[i]);
		uart_clock_base->parent_rates[i] = rate;

		if (i != PARENT_CLOCK_XTAL) {
			/*
			 * Calculate the smallest TBG d1 and d2 divisors that
			 * still can provide 9600 baudrate.
			 */
			d1 = DIV_ROUND_UP(rate, 9600 * OSAMP_MAX_DIVISOR *
					  BRDV_BAUD_MAX);
			if (d1 < 1)
				d1 = 1;
			else if (d1 > CLK_TBG_DIV1_MAX)
				d1 = CLK_TBG_DIV1_MAX;

			d2 = DIV_ROUND_UP(rate, 9600 * OSAMP_MAX_DIVISOR *
					  BRDV_BAUD_MAX * d1);
			if (d2 < 1)
				d2 = 1;
			else if (d2 > CLK_TBG_DIV2_MAX)
				d2 = CLK_TBG_DIV2_MAX;
		} else {
			/*
			 * When UART clock uses XTAL clock as a source then it
			 * is not possible to use d1 and d2 divisors.
			 */
			d1 = d2 = 1;
		}

		/* Skip clock source which cannot provide 9600 baudrate */
		if (rate > 9600 * OSAMP_MAX_DIVISOR * BRDV_BAUD_MAX * d1 * d2)
			continue;

		/*
		 * Choose TBG clock source with the smallest divisors. Use XTAL
		 * clock source only in case TBG is not available as XTAL cannot
		 * be used for baudrates higher than 230400.
		 */
		if (parent_clk_idx == -1 ||
		    (i != PARENT_CLOCK_XTAL && div > d1 * d2)) {
			parent_clk_idx = i;
			div = d1 * d2;
		}
	}

	for (i = 0; i < ARRAY_SIZE(parent_clk_names); i++) {
		if (i == parent_clk_idx || IS_ERR(parent_clks[i]))
			continue;
		clk_disable_unprepare(parent_clks[i]);
		devm_clk_put(dev, parent_clks[i]);
	}

	if (parent_clk_idx == -1) {
		dev_err(dev, "No usable parent clock\n");
		return -ENOENT;
	}

	uart_clock_base->parent_idx = parent_clk_idx;
	uart_clock_base->div = div;

	dev_notice(dev, "Using parent clock %s as base UART clock\n",
		   __clk_get_name(parent_clks[parent_clk_idx]));

	for (i = 0; i < ARRAY_SIZE(uart_clk_names); i++) {
		ret = mvebu_uart_clock_register(dev,
				&uart_clock_base->clocks[i],
				uart_clk_names[i],
				__clk_get_name(parent_clks[parent_clk_idx]));
		if (ret) {
			dev_err(dev, "Can't register UART clock %d: %d\n",
				i, ret);
			return ret;
		}
	}

	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
					   hw_clk_data);
}

static const struct of_device_id mvebu_uart_clock_of_match[] = {
	{ .compatible = "marvell,armada-3700-uart-clock", },
	{ }
};

static struct platform_driver mvebu_uart_clock_platform_driver = {
	.probe = mvebu_uart_clock_probe,
	.driver		= {
		.name	= "mvebu-uart-clock",
		.of_match_table = mvebu_uart_clock_of_match,
	},
};

static int __init mvebu_uart_init(void)
{
	int ret;

	ret = uart_register_driver(&mvebu_uart_driver);
	if (ret)
		return ret;

	ret = platform_driver_register(&mvebu_uart_clock_platform_driver);
	if (ret) {
		uart_unregister_driver(&mvebu_uart_driver);
		return ret;
	}

	ret = platform_driver_register(&mvebu_uart_platform_driver);
	if (ret) {
		platform_driver_unregister(&mvebu_uart_clock_platform_driver);
		uart_unregister_driver(&mvebu_uart_driver);
		return ret;
	}

	return 0;
}
arch_initcall(mvebu_uart_init);