summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs/zl38060.c
blob: 28c92d90299e9e66490b978911a6f6e4e0f29fc4 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
// SPDX-License-Identifier: GPL-2.0-only
//
// Codec driver for Microsemi ZL38060 Connected Home Audio Processor.
//
// Copyright(c) 2020 Sven Van Asbroeck

// The ZL38060 is very flexible and configurable. This driver implements only a
// tiny subset of the chip's possible configurations:
//
// - DSP block bypassed: DAI        routed straight to DACs
//                       microphone routed straight to DAI
// - chip's internal clock is driven by a 12 MHz external crystal
// - chip's DAI connected to CPU is I2S, and bit + frame clock master
// - chip must be strapped for "host boot": in this mode, firmware will be
//   provided by this driver.

#include <linux/gpio/consumer.h>
#include <linux/gpio/driver.h>
#include <linux/property.h>
#include <linux/spi/spi.h>
#include <linux/regmap.h>
#include <linux/module.h>
#include <linux/ihex.h>

#include <sound/pcm_params.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>

#define DRV_NAME		"zl38060"

#define ZL38_RATES		(SNDRV_PCM_RATE_8000  |\
				SNDRV_PCM_RATE_16000 |\
				SNDRV_PCM_RATE_48000)
#define ZL38_FORMATS		SNDRV_PCM_FMTBIT_S16_LE

#define HBI_FIRMWARE_PAGE	0xFF
#define ZL38_MAX_RAW_XFER	0x100

#define REG_TDMA_CFG_CLK	0x0262
#define CFG_CLK_PCLK_SHIFT	4
#define CFG_CLK_PCLK_MASK	(0x7ff << CFG_CLK_PCLK_SHIFT)
#define CFG_CLK_PCLK(bits)	((bits - 1) << CFG_CLK_PCLK_SHIFT)
#define CFG_CLK_MASTER		BIT(15)
#define CFG_CLK_FSRATE_MASK	0x7
#define CFG_CLK_FSRATE_8KHZ	0x1
#define CFG_CLK_FSRATE_16KHZ	0x2
#define CFG_CLK_FSRATE_48KHZ	0x6

#define REG_CLK_CFG		0x0016
#define CLK_CFG_SOURCE_XTAL	BIT(15)

#define REG_CLK_STATUS		0x0014
#define CLK_STATUS_HWRST	BIT(0)

#define REG_PARAM_RESULT	0x0034
#define PARAM_RESULT_READY	0xD3D3

#define REG_PG255_BASE_HI	0x000C
#define REG_PG255_OFFS(addr)	((HBI_FIRMWARE_PAGE << 8) | (addr & 0xFF))
#define REG_FWR_EXEC		0x012C

#define REG_CMD			0x0032
#define REG_HW_REV		0x0020
#define REG_FW_PROD		0x0022
#define REG_FW_REV		0x0024

#define REG_SEMA_FLAGS		0x0006
#define SEMA_FLAGS_BOOT_CMD	BIT(0)
#define SEMA_FLAGS_APP_REBOOT	BIT(1)

#define REG_HW_REV		0x0020
#define REG_FW_PROD		0x0022
#define REG_FW_REV		0x0024
#define REG_GPIO_DIR		0x02DC
#define REG_GPIO_DAT		0x02DA

#define BOOTCMD_LOAD_COMPLETE	0x000D
#define BOOTCMD_FW_GO		0x0008

#define FIRMWARE_MAJOR		2
#define FIRMWARE_MINOR		2

struct zl38_codec_priv {
	struct device *dev;
	struct regmap *regmap;
	bool is_stream_in_use[2];
	struct gpio_chip *gpio_chip;
};

static int zl38_fw_issue_command(struct regmap *regmap, u16 cmd)
{
	unsigned int val;
	int err;

	err = regmap_read_poll_timeout(regmap, REG_SEMA_FLAGS, val,
				       !(val & SEMA_FLAGS_BOOT_CMD), 10000,
				       10000 * 100);
	if (err)
		return err;
	err = regmap_write(regmap, REG_CMD, cmd);
	if (err)
		return err;
	err = regmap_update_bits(regmap, REG_SEMA_FLAGS, SEMA_FLAGS_BOOT_CMD,
				 SEMA_FLAGS_BOOT_CMD);
	if (err)
		return err;

	return regmap_read_poll_timeout(regmap, REG_CMD, val, !val, 10000,
					10000 * 100);
}

static int zl38_fw_go(struct regmap *regmap)
{
	int err;

	err = zl38_fw_issue_command(regmap, BOOTCMD_LOAD_COMPLETE);
	if (err)
		return err;

	return zl38_fw_issue_command(regmap, BOOTCMD_FW_GO);
}

static int zl38_fw_enter_boot_mode(struct regmap *regmap)
{
	unsigned int val;
	int err;

	err = regmap_update_bits(regmap, REG_CLK_STATUS, CLK_STATUS_HWRST,
				 CLK_STATUS_HWRST);
	if (err)
		return err;

	return regmap_read_poll_timeout(regmap, REG_PARAM_RESULT, val,
					val == PARAM_RESULT_READY, 1000, 50000);
}

static int
zl38_fw_send_data(struct regmap *regmap, u32 addr, const void *data, u16 len)
{
	__be32 addr_base = cpu_to_be32(addr & ~0xFF);
	int err;

	err = regmap_raw_write(regmap, REG_PG255_BASE_HI, &addr_base,
			       sizeof(addr_base));
	if (err)
		return err;
	return regmap_raw_write(regmap, REG_PG255_OFFS(addr), data, len);
}

static int zl38_fw_send_xaddr(struct regmap *regmap, const void *data)
{
	/* execution address from ihex: 32-bit little endian.
	 * device register expects 32-bit big endian.
	 */
	u32 addr = le32_to_cpup(data);
	__be32 baddr = cpu_to_be32(addr);

	return regmap_raw_write(regmap, REG_FWR_EXEC, &baddr, sizeof(baddr));
}

static int zl38_load_firmware(struct device *dev, struct regmap *regmap)
{
	const struct ihex_binrec *rec;
	const struct firmware *fw;
	u32 addr;
	u16 len;
	int err;

	/* how to get this firmware:
	 * 1. request and download chip firmware from Microsemi
	 *    (provided by Microsemi in srec format)
	 * 2. convert downloaded firmware from srec to ihex. Simple tool:
	 *    https://gitlab.com/TheSven73/s3-to-irec
	 * 3. convert ihex to binary (.fw) using ihex2fw tool which is included
	 *    with the Linux kernel sources
	 */
	err = request_ihex_firmware(&fw, "zl38060.fw", dev);
	if (err)
		return err;
	err = zl38_fw_enter_boot_mode(regmap);
	if (err)
		goto out;
	rec = (const struct ihex_binrec *)fw->data;
	while (rec) {
		addr = be32_to_cpu(rec->addr);
		len = be16_to_cpu(rec->len);
		if (addr) {
			/* regular data ihex record */
			err = zl38_fw_send_data(regmap, addr, rec->data, len);
		} else if (len == 4) {
			/* execution address ihex record */
			err = zl38_fw_send_xaddr(regmap, rec->data);
		} else {
			err = -EINVAL;
		}
		if (err)
			goto out;
		/* next ! */
		rec = ihex_next_binrec(rec);
	}
	err = zl38_fw_go(regmap);

out:
	release_firmware(fw);
	return err;
}


static int zl38_software_reset(struct regmap *regmap)
{
	unsigned int val;
	int err;

	err = regmap_update_bits(regmap, REG_SEMA_FLAGS, SEMA_FLAGS_APP_REBOOT,
				 SEMA_FLAGS_APP_REBOOT);
	if (err)
		return err;

	/* wait for host bus interface to settle.
	 * Not sure if this is required: Microsemi's vendor driver does this,
	 * but the firmware manual does not mention it. Leave it in, there's
	 * little downside, apart from a slower reset.
	 */
	msleep(50);

	return regmap_read_poll_timeout(regmap, REG_SEMA_FLAGS, val,
					!(val & SEMA_FLAGS_APP_REBOOT), 10000,
					10000 * 100);
}

static int zl38_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
{
	struct zl38_codec_priv *priv = snd_soc_dai_get_drvdata(dai);
	int err;

	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
	case SND_SOC_DAIFMT_I2S:
		/* firmware default is normal i2s */
		break;
	default:
		return -EINVAL;
	}

	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
	case SND_SOC_DAIFMT_NB_NF:
		/* firmware default is normal bitclock and frame */
		break;
	default:
		return -EINVAL;
	}

	switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) {
	case SND_SOC_DAIFMT_CBP_CFP:
		/* always 32 bits per frame (= 16 bits/channel, 2 channels) */
		err = regmap_update_bits(priv->regmap, REG_TDMA_CFG_CLK,
					 CFG_CLK_MASTER | CFG_CLK_PCLK_MASK,
					 CFG_CLK_MASTER | CFG_CLK_PCLK(32));
		if (err)
			return err;
		break;
	default:
		return -EINVAL;
	}

	return 0;
}

static int zl38_hw_params(struct snd_pcm_substream *substream,
			  struct snd_pcm_hw_params *params,
			  struct snd_soc_dai *dai)
{
	struct zl38_codec_priv *priv = snd_soc_dai_get_drvdata(dai);
	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
	unsigned int fsrate;
	int err;

	/* We cannot change hw_params while the dai is already in use - the
	 * software reset will corrupt the audio. However, this is not required,
	 * as the chip's TDM buses are fully symmetric, which mandates identical
	 * rates, channels, and samplebits for record and playback.
	 */
	if (priv->is_stream_in_use[!tx])
		goto skip_setup;

	switch (params_rate(params)) {
	case 8000:
		fsrate = CFG_CLK_FSRATE_8KHZ;
		break;
	case 16000:
		fsrate = CFG_CLK_FSRATE_16KHZ;
		break;
	case 48000:
		fsrate = CFG_CLK_FSRATE_48KHZ;
		break;
	default:
		return -EINVAL;
	}

	err = regmap_update_bits(priv->regmap, REG_TDMA_CFG_CLK,
				 CFG_CLK_FSRATE_MASK, fsrate);
	if (err)
		return err;

	/* chip requires a software reset to apply audio register changes */
	err = zl38_software_reset(priv->regmap);
	if (err)
		return err;

skip_setup:
	priv->is_stream_in_use[tx] = true;

	return 0;
}

static int zl38_hw_free(struct snd_pcm_substream *substream,
			struct snd_soc_dai *dai)
{
	struct zl38_codec_priv *priv = snd_soc_dai_get_drvdata(dai);
	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;

	priv->is_stream_in_use[tx] = false;

	return 0;
}

/* stereo bypass with no AEC */
static const struct reg_sequence cp_config_stereo_bypass[] = {
	/* interconnects must be programmed first */
	{ 0x0210, 0x0005 },	/* DAC1   in <= I2S1-L */
	{ 0x0212, 0x0006 },	/* DAC2   in <= I2S1-R */
	{ 0x0214, 0x0001 },	/* I2S1-L in <= MIC1   */
	{ 0x0216, 0x0001 },	/* I2S1-R in <= MIC1   */
	{ 0x0224, 0x0000 },	/* AEC-S  in <= n/a    */
	{ 0x0226, 0x0000 },	/* AEC-R  in <= n/a    */
	/* output enables must be programmed next */
	{ 0x0202, 0x000F },	/* enable I2S1 + DAC   */
};

static const struct snd_soc_dai_ops zl38_dai_ops = {
	.set_fmt = zl38_set_fmt,
	.hw_params = zl38_hw_params,
	.hw_free = zl38_hw_free,
};

static struct snd_soc_dai_driver zl38_dai = {
	.name = "zl38060-tdma",
	.playback = {
		.stream_name = "Playback",
		.channels_min = 2,
		.channels_max = 2,
		.rates = ZL38_RATES,
		.formats = ZL38_FORMATS,
	},
	.capture = {
		.stream_name = "Capture",
		.channels_min = 2,
		.channels_max = 2,
		.rates = ZL38_RATES,
		.formats = ZL38_FORMATS,
	},
	.ops = &zl38_dai_ops,
	.symmetric_rate = 1,
	.symmetric_sample_bits = 1,
	.symmetric_channels = 1,
};

static const struct snd_soc_dapm_widget zl38_dapm_widgets[] = {
	SND_SOC_DAPM_OUTPUT("DAC1"),
	SND_SOC_DAPM_OUTPUT("DAC2"),

	SND_SOC_DAPM_INPUT("DMICL"),
};

static const struct snd_soc_dapm_route zl38_dapm_routes[] = {
	{ "DAC1",  NULL, "Playback" },
	{ "DAC2",  NULL, "Playback" },

	{ "Capture",  NULL, "DMICL" },
};

static const struct snd_soc_component_driver zl38_component_dev = {
	.dapm_widgets		= zl38_dapm_widgets,
	.num_dapm_widgets	= ARRAY_SIZE(zl38_dapm_widgets),
	.dapm_routes		= zl38_dapm_routes,
	.num_dapm_routes	= ARRAY_SIZE(zl38_dapm_routes),
	.endianness		= 1,
};

static void chip_gpio_set(struct gpio_chip *c, unsigned int offset, int val)
{
	struct regmap *regmap = gpiochip_get_data(c);
	unsigned int mask = BIT(offset);

	regmap_update_bits(regmap, REG_GPIO_DAT, mask, val ? mask : 0);
}

static int chip_gpio_get(struct gpio_chip *c, unsigned int offset)
{
	struct regmap *regmap = gpiochip_get_data(c);
	unsigned int mask = BIT(offset);
	unsigned int val;
	int err;

	err = regmap_read(regmap, REG_GPIO_DAT, &val);
	if (err)
		return err;

	return !!(val & mask);
}

static int chip_direction_input(struct gpio_chip *c, unsigned int offset)
{
	struct regmap *regmap = gpiochip_get_data(c);
	unsigned int mask = BIT(offset);

	return regmap_update_bits(regmap, REG_GPIO_DIR, mask, 0);
}

static int
chip_direction_output(struct gpio_chip *c, unsigned int offset, int val)
{
	struct regmap *regmap = gpiochip_get_data(c);
	unsigned int mask = BIT(offset);

	chip_gpio_set(c, offset, val);
	return regmap_update_bits(regmap, REG_GPIO_DIR, mask, mask);
}

static const struct gpio_chip template_chip = {
	.owner = THIS_MODULE,
	.label = DRV_NAME,

	.base = -1,
	.ngpio = 14,
	.direction_input = chip_direction_input,
	.direction_output = chip_direction_output,
	.get = chip_gpio_get,
	.set = chip_gpio_set,

	.can_sleep = true,
};

static int zl38_check_revision(struct device *dev, struct regmap *regmap)
{
	unsigned int hwrev, fwprod, fwrev;
	int fw_major, fw_minor, fw_micro;
	int err;

	err = regmap_read(regmap, REG_HW_REV, &hwrev);
	if (err)
		return err;
	err = regmap_read(regmap, REG_FW_PROD, &fwprod);
	if (err)
		return err;
	err = regmap_read(regmap, REG_FW_REV, &fwrev);
	if (err)
		return err;

	fw_major = (fwrev >> 12) & 0xF;
	fw_minor = (fwrev >>  8) & 0xF;
	fw_micro = fwrev & 0xFF;
	dev_info(dev, "hw rev 0x%x, fw product code %d, firmware rev %d.%d.%d",
		 hwrev & 0x1F, fwprod, fw_major, fw_minor, fw_micro);

	if (fw_major != FIRMWARE_MAJOR || fw_minor < FIRMWARE_MINOR) {
		dev_err(dev, "unsupported firmware. driver supports %d.%d",
			FIRMWARE_MAJOR, FIRMWARE_MINOR);
		return -EINVAL;
	}

	return 0;
}

static int zl38_bus_read(void *context,
			 const void *reg_buf, size_t reg_size,
			 void *val_buf, size_t val_size)
{
	struct spi_device *spi = context;
	const u8 *reg_buf8 = reg_buf;
	size_t len = 0;
	u8 offs, page;
	u8 txbuf[4];

	if (reg_size != 2 || val_size > ZL38_MAX_RAW_XFER)
		return -EINVAL;

	offs = reg_buf8[1] >> 1;
	page = reg_buf8[0];

	if (page) {
		txbuf[len++] = 0xFE;
		txbuf[len++] = page == HBI_FIRMWARE_PAGE ? 0xFF : page - 1;
		txbuf[len++] = offs;
		txbuf[len++] = val_size / 2 - 1;
	} else {
		txbuf[len++] = offs | 0x80;
		txbuf[len++] = val_size / 2 - 1;
	}

	return spi_write_then_read(spi, txbuf, len, val_buf, val_size);
}

static int zl38_bus_write(void *context, const void *data, size_t count)
{
	struct spi_device *spi = context;
	u8 buf[4 + ZL38_MAX_RAW_XFER];
	size_t val_len, len = 0;
	const u8 *data8 = data;
	u8 offs, page;

	if (count > (2 + ZL38_MAX_RAW_XFER) || count < 4)
		return -EINVAL;
	val_len = count - 2;
	offs = data8[1] >> 1;
	page = data8[0];

	if (page) {
		buf[len++] = 0xFE;
		buf[len++] = page == HBI_FIRMWARE_PAGE ? 0xFF : page - 1;
		buf[len++] = offs;
		buf[len++] = (val_len / 2 - 1) | 0x80;
	} else {
		buf[len++] = offs | 0x80;
		buf[len++] = (val_len / 2 - 1) | 0x80;
	}
	memcpy(buf + len, data8 + 2, val_len);
	len += val_len;

	return spi_write(spi, buf, len);
}

static const struct regmap_bus zl38_regmap_bus = {
	.read = zl38_bus_read,
	.write = zl38_bus_write,
	.max_raw_write = ZL38_MAX_RAW_XFER,
	.max_raw_read = ZL38_MAX_RAW_XFER,
};

static const struct regmap_config zl38_regmap_conf = {
	.reg_bits = 16,
	.val_bits = 16,
	.reg_stride = 2,
	.use_single_read = true,
	.use_single_write = true,
};

static int zl38_spi_probe(struct spi_device *spi)
{
	struct device *dev = &spi->dev;
	struct zl38_codec_priv *priv;
	struct gpio_desc *reset_gpio;
	int err;

	/* get the chip to a known state by putting it in reset */
	reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
	if (IS_ERR(reset_gpio))
		return PTR_ERR(reset_gpio);
	if (reset_gpio) {
		/* datasheet: need > 10us for a digital + analog reset */
		usleep_range(15, 50);
		/* take the chip out of reset */
		gpiod_set_value_cansleep(reset_gpio, 0);
		/* datasheet: need > 3ms for digital section to become stable */
		usleep_range(3000, 10000);
	}

	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
	if (!priv)
		return -ENOMEM;

	priv->dev = dev;
	dev_set_drvdata(dev, priv);
	priv->regmap = devm_regmap_init(dev, &zl38_regmap_bus, spi,
					&zl38_regmap_conf);
	if (IS_ERR(priv->regmap))
		return PTR_ERR(priv->regmap);

	err = zl38_load_firmware(dev, priv->regmap);
	if (err)
		return err;

	err = zl38_check_revision(dev, priv->regmap);
	if (err)
		return err;

	priv->gpio_chip = devm_kmemdup(dev, &template_chip,
				       sizeof(template_chip), GFP_KERNEL);
	if (!priv->gpio_chip)
		return -ENOMEM;
	priv->gpio_chip->parent = dev;
	err = devm_gpiochip_add_data(dev, priv->gpio_chip, priv->regmap);
	if (err)
		return err;

	/* setup the cross-point switch for stereo bypass */
	err = regmap_multi_reg_write(priv->regmap, cp_config_stereo_bypass,
				     ARRAY_SIZE(cp_config_stereo_bypass));
	if (err)
		return err;
	/* setup for 12MHz crystal connected to the chip */
	err = regmap_update_bits(priv->regmap, REG_CLK_CFG, CLK_CFG_SOURCE_XTAL,
				 CLK_CFG_SOURCE_XTAL);
	if (err)
		return err;

	return devm_snd_soc_register_component(dev, &zl38_component_dev,
					       &zl38_dai, 1);
}

static const struct of_device_id zl38_dt_ids[] __maybe_unused = {
	{ .compatible = "mscc,zl38060", },
	{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, zl38_dt_ids);

static const struct spi_device_id zl38_spi_ids[] = {
	{ "zl38060", 0 },
	{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(spi, zl38_spi_ids);

static struct spi_driver zl38060_spi_driver = {
	.driver	= {
		.name = DRV_NAME,
		.of_match_table = of_match_ptr(zl38_dt_ids),
	},
	.probe = zl38_spi_probe,
	.id_table = zl38_spi_ids,
};
module_spi_driver(zl38060_spi_driver);

MODULE_DESCRIPTION("ASoC ZL38060 driver");
MODULE_AUTHOR("Sven Van Asbroeck <TheSven73@gmail.com>");
MODULE_LICENSE("GPL v2");