diff options
Diffstat (limited to 'm4/ax_code_coverage.m4')
| -rw-r--r-- | m4/ax_code_coverage.m4 | 272 |
1 files changed, 272 insertions, 0 deletions
diff --git a/m4/ax_code_coverage.m4 b/m4/ax_code_coverage.m4 new file mode 100644 index 0000000..53dcf7b --- /dev/null +++ b/m4/ax_code_coverage.m4 @@ -0,0 +1,272 @@ +# =========================================================================== +# https://www.gnu.org/software/autoconf-archive/ax_code_coverage.html +# =========================================================================== +# +# SYNOPSIS +# +# AX_CODE_COVERAGE() +# +# DESCRIPTION +# +# Defines CODE_COVERAGE_CPPFLAGS, CODE_COVERAGE_CFLAGS, +# CODE_COVERAGE_CXXFLAGS and CODE_COVERAGE_LIBS which should be included +# in the CPPFLAGS, CFLAGS CXXFLAGS and LIBS/LIBADD variables of every +# build target (program or library) which should be built with code +# coverage support. Also add rules using AX_ADD_AM_MACRO_STATIC; and +# $enable_code_coverage which can be used in subsequent configure output. +# CODE_COVERAGE_ENABLED is defined and substituted, and corresponds to the +# value of the --enable-code-coverage option, which defaults to being +# disabled. +# +# Test also for gcov program and create GCOV variable that could be +# substituted. +# +# Note that all optimization flags in CFLAGS must be disabled when code +# coverage is enabled. +# +# Usage example: +# +# configure.ac: +# +# AX_CODE_COVERAGE +# +# Makefile.am: +# +# include $(top_srcdir)/aminclude_static.am +# +# my_program_LIBS = ... $(CODE_COVERAGE_LIBS) ... +# my_program_CPPFLAGS = ... $(CODE_COVERAGE_CPPFLAGS) ... +# my_program_CFLAGS = ... $(CODE_COVERAGE_CFLAGS) ... +# my_program_CXXFLAGS = ... $(CODE_COVERAGE_CXXFLAGS) ... +# +# clean-local: code-coverage-clean +# distclean-local: code-coverage-dist-clean +# +# This results in a "check-code-coverage" rule being added to any +# Makefile.am which do "include $(top_srcdir)/aminclude_static.am" +# (assuming the module has been configured with --enable-code-coverage). +# Running `make check-code-coverage` in that directory will run the +# module's test suite (`make check`) and build a code coverage report +# detailing the code which was touched, then print the URI for the report. +# +# This code was derived from Makefile.decl in GLib, originally licensed +# under LGPLv2.1+. +# +# LICENSE +# +# Copyright (c) 2012, 2016 Philip Withnall +# Copyright (c) 2012 Xan Lopez +# Copyright (c) 2012 Christian Persch +# Copyright (c) 2012 Paolo Borelli +# Copyright (c) 2012 Dan Winship +# Copyright (c) 2015,2018 Bastien ROUCARIES +# +# This library is free software; you can redistribute it and/or modify it +# under the terms of the GNU Lesser General Public License as published by +# the Free Software Foundation; either version 2.1 of the License, or (at +# your option) any later version. +# +# This library is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with this program. If not, see <https://www.gnu.org/licenses/>. + +#serial 34 + +m4_define(_AX_CODE_COVERAGE_RULES,[ +AX_ADD_AM_MACRO_STATIC([ +# Code coverage +# +# Optional: +# - CODE_COVERAGE_DIRECTORY: Top-level directory for code coverage reporting. +# Multiple directories may be specified, separated by whitespace. +# (Default: \$(top_builddir)) +# - CODE_COVERAGE_OUTPUT_FILE: Filename and path for the .info file generated +# by lcov for code coverage. (Default: +# \$(PACKAGE_NAME)-\$(PACKAGE_VERSION)-coverage.info) +# - CODE_COVERAGE_OUTPUT_DIRECTORY: Directory for generated code coverage +# reports to be created. (Default: +# \$(PACKAGE_NAME)-\$(PACKAGE_VERSION)-coverage) +# - CODE_COVERAGE_BRANCH_COVERAGE: Set to 1 to enforce branch coverage, +# set to 0 to disable it and leave empty to stay with the default. +# (Default: empty) +# - CODE_COVERAGE_LCOV_SHOPTS_DEFAULT: Extra options shared between both lcov +# instances. (Default: based on $CODE_COVERAGE_BRANCH_COVERAGE) +# - CODE_COVERAGE_LCOV_SHOPTS: Extra options to shared between both lcov +# instances. (Default: $CODE_COVERAGE_LCOV_SHOPTS_DEFAULT) +# - CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH: --gcov-tool pathtogcov +# - CODE_COVERAGE_LCOV_OPTIONS_DEFAULT: Extra options to pass to the +# collecting lcov instance. (Default: $CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH) +# - CODE_COVERAGE_LCOV_OPTIONS: Extra options to pass to the collecting lcov +# instance. (Default: $CODE_COVERAGE_LCOV_OPTIONS_DEFAULT) +# - CODE_COVERAGE_LCOV_RMOPTS_DEFAULT: Extra options to pass to the filtering +# lcov instance. (Default: empty) +# - CODE_COVERAGE_LCOV_RMOPTS: Extra options to pass to the filtering lcov +# instance. (Default: $CODE_COVERAGE_LCOV_RMOPTS_DEFAULT) +# - CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT: Extra options to pass to the +# genhtml instance. (Default: based on $CODE_COVERAGE_BRANCH_COVERAGE) +# - CODE_COVERAGE_GENHTML_OPTIONS: Extra options to pass to the genhtml +# instance. (Default: $CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT) +# - CODE_COVERAGE_IGNORE_PATTERN: Extra glob pattern of files to ignore +# +# The generated report will be titled using the \$(PACKAGE_NAME) and +# \$(PACKAGE_VERSION). In order to add the current git hash to the title, +# use the git-version-gen script, available online. +# Optional variables +# run only on top dir +if CODE_COVERAGE_ENABLED + ifeq (\$(abs_builddir), \$(abs_top_builddir)) +CODE_COVERAGE_DIRECTORY ?= \$(top_builddir) +CODE_COVERAGE_OUTPUT_FILE ?= \$(PACKAGE_NAME)-\$(PACKAGE_VERSION)-coverage.info +CODE_COVERAGE_OUTPUT_DIRECTORY ?= \$(PACKAGE_NAME)-\$(PACKAGE_VERSION)-coverage + +CODE_COVERAGE_BRANCH_COVERAGE ?= +CODE_COVERAGE_LCOV_SHOPTS_DEFAULT ?= \$(if \$(CODE_COVERAGE_BRANCH_COVERAGE),\ +--rc lcov_branch_coverage=\$(CODE_COVERAGE_BRANCH_COVERAGE)) +CODE_COVERAGE_LCOV_SHOPTS ?= \$(CODE_COVERAGE_LCOV_SHOPTS_DEFAULT) +CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH ?= --gcov-tool \"\$(GCOV)\" +CODE_COVERAGE_LCOV_OPTIONS_DEFAULT ?= \$(CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH) +CODE_COVERAGE_LCOV_OPTIONS ?= \$(CODE_COVERAGE_LCOV_OPTIONS_DEFAULT) +CODE_COVERAGE_LCOV_RMOPTS_DEFAULT ?= +CODE_COVERAGE_LCOV_RMOPTS ?= \$(CODE_COVERAGE_LCOV_RMOPTS_DEFAULT) +CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT ?=\ +\$(if \$(CODE_COVERAGE_BRANCH_COVERAGE),\ +--rc genhtml_branch_coverage=\$(CODE_COVERAGE_BRANCH_COVERAGE)) +CODE_COVERAGE_GENHTML_OPTIONS ?= \$(CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT) +CODE_COVERAGE_IGNORE_PATTERN ?= + +GITIGNOREFILES := \$(GITIGNOREFILES) \$(CODE_COVERAGE_OUTPUT_FILE) \$(CODE_COVERAGE_OUTPUT_DIRECTORY) +code_coverage_v_lcov_cap = \$(code_coverage_v_lcov_cap_\$(V)) +code_coverage_v_lcov_cap_ = \$(code_coverage_v_lcov_cap_\$(AM_DEFAULT_VERBOSITY)) +code_coverage_v_lcov_cap_0 = @echo \" LCOV --capture\" \$(CODE_COVERAGE_OUTPUT_FILE); +code_coverage_v_lcov_ign = \$(code_coverage_v_lcov_ign_\$(V)) +code_coverage_v_lcov_ign_ = \$(code_coverage_v_lcov_ign_\$(AM_DEFAULT_VERBOSITY)) +code_coverage_v_lcov_ign_0 = @echo \" LCOV --remove /tmp/*\" \$(CODE_COVERAGE_IGNORE_PATTERN); +code_coverage_v_genhtml = \$(code_coverage_v_genhtml_\$(V)) +code_coverage_v_genhtml_ = \$(code_coverage_v_genhtml_\$(AM_DEFAULT_VERBOSITY)) +code_coverage_v_genhtml_0 = @echo \" GEN \" \"\$(CODE_COVERAGE_OUTPUT_DIRECTORY)\"; +code_coverage_quiet = \$(code_coverage_quiet_\$(V)) +code_coverage_quiet_ = \$(code_coverage_quiet_\$(AM_DEFAULT_VERBOSITY)) +code_coverage_quiet_0 = --quiet + +# sanitizes the test-name: replaces with underscores: dashes and dots +code_coverage_sanitize = \$(subst -,_,\$(subst .,_,\$(1))) + +# Use recursive makes in order to ignore errors during check +check-code-coverage: + -\$(AM_V_at)\$(MAKE) \$(AM_MAKEFLAGS) -k check + \$(AM_V_at)\$(MAKE) \$(AM_MAKEFLAGS) code-coverage-capture + +# Capture code coverage data +code-coverage-capture: code-coverage-capture-hook + \$(code_coverage_v_lcov_cap)\$(LCOV) \$(code_coverage_quiet) \$(addprefix --directory ,\$(CODE_COVERAGE_DIRECTORY)) --capture --output-file \"\$(CODE_COVERAGE_OUTPUT_FILE).tmp\" --test-name \"\$(call code_coverage_sanitize,\$(PACKAGE_NAME)-\$(PACKAGE_VERSION))\" --no-checksum --compat-libtool \$(CODE_COVERAGE_LCOV_SHOPTS) \$(CODE_COVERAGE_LCOV_OPTIONS) + \$(code_coverage_v_lcov_ign)\$(LCOV) \$(code_coverage_quiet) \$(addprefix --directory ,\$(CODE_COVERAGE_DIRECTORY)) --remove \"\$(CODE_COVERAGE_OUTPUT_FILE).tmp\" \"/tmp/*\" \$(CODE_COVERAGE_IGNORE_PATTERN) --output-file \"\$(CODE_COVERAGE_OUTPUT_FILE)\" \$(CODE_COVERAGE_LCOV_SHOPTS) \$(CODE_COVERAGE_LCOV_RMOPTS) + -@rm -f \"\$(CODE_COVERAGE_OUTPUT_FILE).tmp\" + \$(code_coverage_v_genhtml)LANG=C \$(GENHTML) \$(code_coverage_quiet) \$(addprefix --prefix ,\$(CODE_COVERAGE_DIRECTORY)) --output-directory \"\$(CODE_COVERAGE_OUTPUT_DIRECTORY)\" --title \"\$(PACKAGE_NAME)-\$(PACKAGE_VERSION) Code Coverage\" --legend --show-details \"\$(CODE_COVERAGE_OUTPUT_FILE)\" \$(CODE_COVERAGE_GENHTML_OPTIONS) + @echo \"file://\$(abs_builddir)/\$(CODE_COVERAGE_OUTPUT_DIRECTORY)/index.html\" + +code-coverage-clean: + -\$(LCOV) --directory \$(top_builddir) -z + -rm -rf \"\$(CODE_COVERAGE_OUTPUT_FILE)\" \"\$(CODE_COVERAGE_OUTPUT_FILE).tmp\" \"\$(CODE_COVERAGE_OUTPUT_DIRECTORY)\" + -find . \\( -name \"*.gcda\" -o -name \"*.gcno\" -o -name \"*.gcov\" \\) -delete + +code-coverage-dist-clean: + +A][M_DISTCHECK_CONFIGURE_FLAGS := \$(A][M_DISTCHECK_CONFIGURE_FLAGS) --disable-code-coverage + else # ifneq (\$(abs_builddir), \$(abs_top_builddir)) +check-code-coverage: + +code-coverage-capture: code-coverage-capture-hook + +code-coverage-clean: + +code-coverage-dist-clean: + endif # ifeq (\$(abs_builddir), \$(abs_top_builddir)) +else #! CODE_COVERAGE_ENABLED +# Use recursive makes in order to ignore errors during check +check-code-coverage: + @echo \"Need to reconfigure with --enable-code-coverage\" +# Capture code coverage data +code-coverage-capture: code-coverage-capture-hook + @echo \"Need to reconfigure with --enable-code-coverage\" + +code-coverage-clean: + +code-coverage-dist-clean: + +endif #CODE_COVERAGE_ENABLED +# Hook rule executed before code-coverage-capture, overridable by the user +code-coverage-capture-hook: + +.PHONY: check-code-coverage code-coverage-capture code-coverage-dist-clean code-coverage-clean code-coverage-capture-hook +]) +]) + +AC_DEFUN([_AX_CODE_COVERAGE_ENABLED],[ + AX_CHECK_GNU_MAKE([],[AC_MSG_ERROR([not using GNU make that is needed for coverage])]) + AC_REQUIRE([AX_ADD_AM_MACRO_STATIC]) + # check for gcov + AC_CHECK_TOOL([GCOV], + [$_AX_CODE_COVERAGE_GCOV_PROG_WITH], + [:]) + AS_IF([test "X$GCOV" = "X:"], + [AC_MSG_ERROR([gcov is needed to do coverage])]) + AC_SUBST([GCOV]) + + dnl Check if gcc is being used + AS_IF([ test "$GCC" = "no" ], [ + AC_MSG_ERROR([not compiling with gcc, which is required for gcov code coverage]) + ]) + + AC_CHECK_PROG([LCOV], [lcov], [lcov]) + AC_CHECK_PROG([GENHTML], [genhtml], [genhtml]) + + AS_IF([ test x"$LCOV" = x ], [ + AC_MSG_ERROR([To enable code coverage reporting you must have lcov installed]) + ]) + + AS_IF([ test x"$GENHTML" = x ], [ + AC_MSG_ERROR([Could not find genhtml from the lcov package]) + ]) + + dnl Build the code coverage flags + dnl Define CODE_COVERAGE_LDFLAGS for backwards compatibility + CODE_COVERAGE_CPPFLAGS="-DNDEBUG" + CODE_COVERAGE_CFLAGS="-O0 -g -fprofile-arcs -ftest-coverage -fprofile-abs-path" + CODE_COVERAGE_CXXFLAGS="-O0 -g -fprofile-arcs -ftest-coverage -fprofile-abs-path" + CODE_COVERAGE_LIBS="-lgcov" + + AC_SUBST([CODE_COVERAGE_CPPFLAGS]) + AC_SUBST([CODE_COVERAGE_CFLAGS]) + AC_SUBST([CODE_COVERAGE_CXXFLAGS]) + AC_SUBST([CODE_COVERAGE_LIBS]) +]) + +AC_DEFUN([AX_CODE_COVERAGE],[ + dnl Check for --enable-code-coverage + + # allow to override gcov location + AC_ARG_WITH([gcov], + [AS_HELP_STRING([--with-gcov[=GCOV]], [use given GCOV for coverage (GCOV=gcov).])], + [_AX_CODE_COVERAGE_GCOV_PROG_WITH=$with_gcov], + [_AX_CODE_COVERAGE_GCOV_PROG_WITH=gcov]) + + AC_MSG_CHECKING([whether to build with code coverage support]) + AC_ARG_ENABLE([code-coverage], + AS_HELP_STRING([--enable-code-coverage], + [Whether to enable code coverage support]),, + enable_code_coverage=no) + + AM_CONDITIONAL([CODE_COVERAGE_ENABLED], [test "x$enable_code_coverage" = xyes]) + AC_SUBST([CODE_COVERAGE_ENABLED], [$enable_code_coverage]) + AC_MSG_RESULT($enable_code_coverage) + + AS_IF([ test "x$enable_code_coverage" = xyes ], [ + _AX_CODE_COVERAGE_ENABLED + ]) + + _AX_CODE_COVERAGE_RULES +]) |