Adding upstream version 4.22.0.upstream/4.22.0

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 232 insertions, 0 deletions

diff --git a/upstream/archlinux/man5/sane-canon_dr.5 b/upstream/archlinux/man5/sane-canon_dr.5
new file mode 100644
index 00000000..9649f012
--- /dev/null
+++ b/upstream/archlinux/man5/sane-canon_dr.5
@@ -0,0 +1,232 @@
+.TH sane\-canon_dr 5 "13 Feb 2021" "" "SANE Scanner Access Now Easy"
+.IX sane\-canon_dr
+
+.SH NAME
+sane\-canon_dr \- SANE backend for Canon DR-series scanners
+
+.SH DESCRIPTION
+The
+.B sane\-canon_dr
+library implements a SANE (Scanner Access Now Easy) backend which
+provides access to some Canon DR-series scanners.
+
+This document describes backend version 60, which shipped with SANE 1.0.32.
+
+.SH SUPPORTED HARDWARE
+This version has only been tested with a few scanner models. Please see
+.I http://www.sane\-project.org/sane\-supported\-devices.html
+for the most recent list.
+
+This backend may support other Canon scanners. The best
+way to determine level of support is to test the scanner directly,
+or to collect a trace of the windows driver in action.
+Please contact the author for help or with test results.
+
+In general, the larger machines (DR-4000 and up) which have been tested use
+a fairly complete protocol, with hardware support for many modes, resolutions
+and features. The smaller machines have many limitations, like missing
+horizontal resolutions, missing binary mode, always scanning full-width, etc.
+There is code in the backend to address these problems, but there seems to be
+no way to detect if they are required, so they must be hard-coded.
+
+.SH OPTIONS
+Effort has been made to expose most hardware options, including:
+.TP
+.B \-\-source Flatbed|ADF Front|ADF Back|ADF Duplex
+Selects the source for the scan.
+
+.TP
+.B \-\-mode Lineart|Halftone|Gray|Color
+Selects the mode for the scan.
+
+.TP
+.B \-\-resolution
+Controls scan resolution.
+
+.TP
+.B \-\-tl\-x, \-\-tl\-y, \-\-br\-x, \-\-br\-y
+Sets scan area upper left and lower right coordinates. These are renamed
+.BR -t ,
+.BR -l ,
+.BR -x ,
+.B -y
+by some frontends.
+
+.TP
+.B \-\-page\-width, \-\-page\-height
+Sets paper size. Used by scanner to determine centering of scan
+coordinates when using the ADF (Automatic Document Feeder) and
+to detect double feed errors.
+
+.PP
+Other options will be available based on the capabilities of the scanner:
+enhancement, compression, buttons and sensors, etc.
+.PP
+Additionally, several 'software' options are exposed by the backend. These
+are reimplementations of features provided natively by larger scanners, but
+running on the host computer. This enables smaller machines to have similar
+capabilities. Please note that these features are somewhat simplistic, and
+may not perform as well as the native implementations. Note also that these
+features all require that the driver cache the entire image in memory. This
+will almost certainly result in a reduction of scanning speed.
+
+.TP
+.B \-\-swcrop
+Requests the driver to detect the extremities of the paper within the larger
+image, and crop the empty edges.
+
+.TP
+.B \-\-swdeskew
+Requests the driver to detect the rotation of the paper within the larger
+image, and counter the rotation.
+
+.TP
+.B \-\-swdespeck X
+Requests the driver to find and remove dots of X diameter or smaller from the
+image, and fill the space with the average surrounding color.
+
+Use 'scanimage \-\-help' to get a list, but be aware that some options may
+be settable only when another option has been set, and that advanced options
+may be hidden by some frontend programs.
+
+.SH CONFIGURATION FILE
+The configuration file
+.I canon_dr.conf
+is used to tell the backend how to look for scanners, and provide options
+controlling the operation of the backend. This file is read each time the
+frontend asks the backend for a list of scanners, generally only when the
+frontend starts. If the configuration file is missing, the backend will
+fail to run.
+.PP
+Scanners can be specified in the configuration file in 4 ways:
+.PP
+"scsi CANON DR"
+.RS
+Requests backend to search all scsi buses in the system for a device
+which reports itself to be a scanner made by 'CANON', with a model name
+starting with 'DR'.
+.RE
+.PP
+"scsi /dev/sg0" (or other scsi device file)
+.RS
+Requests backend to open the named scsi device. Only useful if you have
+multiple compatible scanners connected to your system, and need to
+specify one. Probably should not be used with the other "scsi" line above.
+.RE
+.PP
+"usb 0x04a9 0x1603" (or other vendor/product ids)
+.RS
+Requests backend to search all usb buses in the system for a device
+which uses that vendor and product id. The device will then be queried
+to determine if it is a Canon scanner.
+.RE
+.PP
+"usb /dev/usb/scanner0" (or other device file)
+.RS
+Some systems use a kernel driver to access usb scanners. This method is untested.
+.RE
+.PP
+Besides the 'scsi' and 'usb' lines, the configuration file supports the
+following 'option' lines:
+.PP
+"option buffer-size [number of bytes]"
+.RS
+Set the number of bytes in the data buffer to something other than the
+compiled\-in default of 4MB. Large values may cause timeouts or hangs, small
+values may cause slow scans.
+.PP
+Note: The backend does not place an upper bound on this value, as some users
+required it to be quite large. Values above the default are not recommended,
+and may crash your OS or lockup your scsi card driver. You have been
+warned.
+.RE
+.PP
+"option vendor-name [string of text]"
+.br
+"option model-name [string of text]"
+.br
+"option version-name [string of text]"
+.RS
+These options can be used collectively to override the values provided by the
+scanner, or to provide the values when the scanner cannot.
+.RE
+.PP
+"option padded-read [0|1]"
+.RS
+Some scanners prepend all data transmitted to host with 12 bytes. Enable this option if the scanner fails to respond to commands.
+.RE
+.PP
+"option duplex-offset [integer]"
+.RS
+Some scanners pad the upper edge of one side of a duplex scan. There is some variation in the amount of padding. Modify this option if your unit shows an unwanted band of image data on only one side.
+.RE
+.PP
+.BR NOTE :
+"option" lines may appear multiple times in the configuration file.
+They only apply to scanners discovered by the next 'scsi/usb' line.
+.PP
+
+.SH ENVIRONMENT
+The backend uses a single environment variable,
+.BR SANE_DEBUG_CANON_DR ,
+which enables debugging output to stderr. Valid values are:
+.PP
+.RS
+5  Errors
+.br
+10 Function trace
+.br
+15 Function detail
+.br
+20 Option commands
+.br
+25 SCSI/USB trace
+.br
+30 SCSI/USB detail
+.br
+35 Useless noise
+.RE
+
+.SH KNOWN ISSUES
+This backend was entirely reverse engineered from usb traces of the proprietary
+driver. Various advanced features of the machines may not be enabled. Many
+machines have not been tested. Their protocol is unknown.
+
+.SH CREDITS
+
+The various authors of the
+.BR sane\-fujitsu (5)
+backend provided useful code.
+.br
+Yabarana Corp.
+.I www.yabarana.com
+provided significant funding.
+.br
+EvriChart, Inc.
+.I www.evrichart.com
+provided funding and loaned equipment.
+.br
+Canon, USA.
+.I www.usa.canon.com
+loaned equipment.
+.br
+HPrint
+.I hprint.com.br
+provided funding and testing for DR-2510 support.
+.br
+Stone-IT
+.I www.stone-it.com
+provided funding for DR-2010 and DR-2050 support.
+.br
+Gerhard Pfeffer provided access and testing for P-208 and P-215.
+.br
+Special thanks to: Alejandro Imass, Andre Shimakawa, Martijn van Brummelen, Thanos Diacakis and Junren Shi for testing and feedback.
+
+.SH "SEE ALSO"
+.BR sane (7),
+.BR sane\-scsi (5),
+.BR sane\-usb(5)
+
+.SH AUTHOR
+m. allan noah:
+.IR "<kitno455 a t gmail d o t com>" .