Adding upstream version 4.22.0.upstream/4.22.0

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 212 insertions, 0 deletions

diff --git a/upstream/debian-bookworm/man1/pnmpsnr.1 b/upstream/debian-bookworm/man1/pnmpsnr.1
new file mode 100644
index 00000000..116e5928
--- /dev/null
+++ b/upstream/debian-bookworm/man1/pnmpsnr.1
@@ -0,0 +1,212 @@
+\
+.\" This man page was generated by the Netpbm tool 'makeman' from HTML source.
+.\" Do not hand-hack it!  If you have bug fixes or improvements, please find
+.\" the corresponding HTML page on the Netpbm website, generate a patch
+.\" against that, and send it to the Netpbm maintainer.
+.TH "Pnmpsnr User Manual" 1 "06 January 2018" "netpbm documentation"
+
+.SH NAME
+pnmpsnr - compute the difference between two images (the PSNR)
+
+.UN synopsis
+.SH SYNOPSIS
+
+\fBpnmpsnr\fP
+
+[\fIpnmfile1\fP]
+
+[\fIpnmfile2\fP]
+
+[\fB-rgb\fP]
+[\fB-machine\fP]
+[\fB-max=\fP\fIn\fP]
+[\fB-target=\fP\fIn\fP]
+[\fB-target1=\fP\fIn\fP]
+[\fB-target2=\fP\fIn\fP]
+[\fB-target3=\fP\fIn\fP]
+.PP
+Minimum unique abbreviations of options are acceptable.  You may use
+double hyphens instead of single hyphen to denote options.  You may use
+white space in place of the equals sign to separate an option name
+from its value.
+
+
+.UN description
+.SH DESCRIPTION
+.PP
+This program is part of
+.BR "Netpbm" (1)\c
+\&.
+.PP
+\fBpnmpsnr\fP reads two PBM, PGM, or PPM files, or PAM equivalents, as
+input and computes the magnitude of difference between the two images as a peak
+signal-to-noise ratio (PSNR) This metric is typically used in image
+compression papers to rate the distortion between original and decoded image.
+.PP
+\fBpnmpsnr\fP either prints these values or compares them to thresholds
+you specify.
+  
+.PP
+The PSNR of a given component is the ratio of the maximum mean square
+difference of component values that could exist between the two images (a
+measure of the information content in an image) to the actual mean square
+difference for the two subject images.  It is expressed as a decibel value.
+.PP
+The mean square difference of a component for two images is the
+mean square difference of the component value, comparing each pixel
+with the pixel in the same position of the other image.  For the
+purposes of this computation, components are normalized to the scale
+[0..1].
+.PP
+The maximum mean square difference is identically 1.
+.PP
+So the higher the PSNR, the closer the images are.  A luminance
+PSNR of 20 means the mean square difference of the luminances of the
+pixels is 100 times less than the maximum possible difference,
+i.e. 0.01.
+.PP
+Note that the word "peak" is a misnomer; there is no maximum involved; the
+metric is a mean.  But "peak signal to noise ratio" is for some reason the
+common term for this measurement.
+.PP
+If the inputs are PBM or PGM, \fBpnmpsnr\fP computes the PSNR of the
+luminance only.  Otherwise, it computes three separate PSNRs: either the
+luminance, and chrominance (Cb and Cr) components of the colors or the
+red, green, and blue components.
+.PP
+By default, the program prints the PSNRs to Standard Output in
+human-friendly form.
+.PP
+With the \fB-machine\fP option, the program prints the PSNRs, but
+in machine-friendly form.
+.PP
+With a \fB-target\fP[\fIx\fP] option, the program just prints
+\&'match' or 'nomatch', depending on whether the PSNRs
+exceed targets you specify.
+  
+.PP
+\fBpnmpsnr\fP reports the PSNR either in human-friendly form or in
+machine-friendly form (see \fB-machine\fP).
+
+
+.UN options
+.SH OPTIONS
+.PP
+In addition to the options common to all programs based on libnetpbm
+(most notably \fB-quiet\fP, see 
+.UR index.html#commonoptions
+ Common Options
+.UE
+\&), \fBpnmpsnr\fP recognizes the following
+command line options:
+
+
+.TP
+\fB-rgb\fP
+This option causes \fBpnmpsnr\fP to compare the red, green, and blue
+components of the color rather than the luminance and chrominance components.
+It has no effect on a monotone image.
+.sp
+This option was new in Netpbm 10.71 (June 2015).
+
+.TP
+\fB-machine\fP
+This option causes \fBpnmpsnr\fP to report the PSNRs in machine-friendly
+form, so another program can easily use the information.
+.sp
+The output is a single line.  It contains one floating point decimal number
+for each color component, with a single space between every two.  (This means
+there are either 1 or 3 numbers).  For the YCbCr color space (no \fB-rgb\fP),
+they are in the order Y, Cb, Cr.  For the RGB color space (\fB-rgb\fP), they
+are in R, G, B order.  For a monotone image, there is one number.
+.sp
+Where the component does not differ between the images, so the PSNR is
+infinite, the number is \fBinf\fP
+.sp
+But note that the number displayed is also modified by the effect of
+\fB-max\fP.  In particular, with \fB-max\fP, you will never see \fBinf\fP.
+.sp
+This option has no effect when you also specify \fB-target\fP[\fIn\fP].
+.sp
+This option was new in Netpbm 10.74 (March 2016).
+
+.TP
+\fB-max=\fP\fIn\fP
+This is meaningful only with \fB-machine\fP.
+.sp
+It specifies the maximum number \fBpnmpsnr\fP will print as a PSNR.
+If the PSNR is greater than \fIn\fP, \fBpnmpsnr\fP just prints \fIn\fP.
+\fIn\fP is a decimal floating point number.  An infinite PSNR is considered
+greater than any number.
+.sp
+This is mainly useful to deal with infinite PSNRs.  It is often much more
+convenient to have a program process only numbers than to make it deal with
+infinity, and often a very large number has the same effect on a program as
+infinity.
+.sp
+Note that the output is logarithmic, which means you will not see really
+large but finite numbers.  If you specify \fB-max=1000\fP, the only way you
+will see 1000 in the output is if the PSNR is really infinite.  Two images
+with as many pixels as there are electrons in the universe, differing in only
+one pixel, and only in the smallest amount representable in the Netpbm format,
+have a PSNR less than 1000.
+.sp
+This option was new in Netpbm 10.74 (March 2016).
+
+.TP
+\fB-target\fP=\fIn\fP
+                        
+This option causes \fBpnmpsnr\fP to run in comparison mode - rather than
+print the PSNRs, it just tells you whether the PSNRs exceed 
+\fIn\fP (a floating point number), i.e. whether the compared images are the
+same within a given margin of error.  If all the computed PSNRs (luminance for
+a PBM or PGM; luminance and chrominance or red, green, and blue for PPM)
+exceed \fIn\fP, the program prints 'match' to Standard Output.
+Otherwise, it prints 'nomatch'.
+.sp
+If you also specify any of \fB-target1\fP, \fB-target2\fP, or
+\fB-target3\fP, and the images are color, \fBpnmpsnr\fP ignores
+\fB-target\fP.
+.sp
+This is mainly useful for use in a program.  If you're
+running \fBpnmpsnr\fP manually, you could just run \fBpnmpsnr\fP
+without \fB-target\fP and compare the PSNRs to your targets yourself.
+.sp
+This option was new in Netpbm 10.82 (March 2018).
+
+.TP
+\fB-target\fP{\fB1\fP,\fB2\fP,\fB3\fP}=\fIn\fP
+Like \fB-target\fP, these options cause \fBpnmpsnr\fP to run in comparison
+mode.  But they provide separate targets for the individual color component
+PSNRs.  \fB-target1\fP, \fBtarget-2\fP, and \fB-target3\fP are for either
+the Y, Cb, and Cr components, respectively, or the red, green, and blue
+components, respectively, depending upon whether you specified \fB-rgb\fP.
+.sp
+If you don't specify the corresponding \fB-target\fP\fIn\fP option for a
+component, \fBpnmpsnr\fP ignores the PSNR of that component in deciding
+whether the images match.
+.sp
+If the image is a PBM or PGM, these options have no effect, except that it
+stilll selects comparison mode, so if you don't \fIalso\fP
+specify \fB-target\fP, and the image is PBM or PGM, the program fails.
+.sp
+Note that the options are defined so that you could code a
+\fBpnmpsnr\fP command in a program that works on both color and monotone
+images, specifying individual PSNR targets for use on the color images and the
+single target for use on the monotone images.
+.sp
+These options were new in Netpbm 10.82 (March 2018).
+    
+
+
+
+.UN seealso
+.SH SEE ALSO
+.BR "pnm" (1)\c
+\&
+.SH DOCUMENT SOURCE
+This manual page was generated by the Netpbm tool 'makeman' from HTML
+source.  The master documentation is at
+.IP
+.B http://netpbm.sourceforge.net/doc/pnmpsnr.html
+.PP
\ No newline at end of file