Adding upstream version 4.22.0.upstream/4.22.0

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1116 insertions, 0 deletions

diff --git a/upstream/opensuse-leap-15-6/man8/ebtables-nft.8 b/upstream/opensuse-leap-15-6/man8/ebtables-nft.8
new file mode 100644
index 00000000..1fa5ad93
--- /dev/null
+++ b/upstream/opensuse-leap-15-6/man8/ebtables-nft.8
@@ -0,0 +1,1116 @@
+.TH EBTABLES 8  "December 2011"
+.\"
+.\" Man page written by Bart De Schuymer <bdschuym@pandora.be>
+.\" It is based on the iptables man page.
+.\"
+.\" The man page was edited, February 25th 2003, by 
+.\"      Greg Morgan <" dr_kludge_at_users_sourceforge_net >
+.\"
+.\" Iptables page by Herve Eychenne March 2000.
+.\"
+.\"     This program is free software; you can redistribute it and/or modify
+.\"     it under the terms of the GNU General Public License as published by
+.\"     the Free Software Foundation; either version 2 of the License, or
+.\"     (at your option) any later version.
+.\"
+.\"     This program is distributed in the hope that it will be useful,
+.\"     but WITHOUT ANY WARRANTY; without even the implied warranty of
+.\"     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+.\"     GNU General Public License for more details.
+.\"
+.\"     You should have received a copy of the GNU General Public License
+.\"     along with this program; if not, write to the Free Software
+.\"     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+.\"     
+.\"
+.SH NAME
+ebtables \- Ethernet bridge frame table administration (nft-based)
+.SH SYNOPSIS
+.BR "ebtables " [ -t " table ] " - [ ACDI "] chain rule specification [match extensions] [watcher extensions] target"
+.br
+.BR "ebtables " [ -t " table ] " -P " chain " ACCEPT " | " DROP " | " RETURN
+.br
+.BR "ebtables " [ -t " table ] " -F " [chain]"
+.br
+.BR "ebtables " [ -t " table ] " -Z " [chain]"
+.br
+.BR "ebtables " [ -t " table ] " -L " [" -Z "] [chain] [ [" --Ln "] | [" --Lx "] ] [" --Lc "] [" --Lmac2 ]
+.br
+.BR "ebtables " [ -t " table ] " -N " chain [" "-P ACCEPT " | " DROP " | " RETURN" ]
+.br
+.BR "ebtables " [ -t " table ] " -X " [chain]"
+.br
+.BR "ebtables " [ -t " table ] " -E " old-chain-name new-chain-name"
+.br
+.BR "ebtables " [ -t " table ] " --init-table
+.br
+.BR "ebtables " [ -t " table ] [" --atomic-file " file] " --atomic-commit
+.br
+.BR "ebtables " [ -t " table ] [" --atomic-file " file] " --atomic-init
+.br
+.BR "ebtables " [ -t " table ] [" --atomic-file " file] " --atomic-save
+.br
+
+.SH DESCRIPTION
+.B ebtables
+is an application program used to set up and maintain the
+tables of rules (inside the Linux kernel) that inspect
+Ethernet frames.
+It is analogous to the
+.B iptables
+application, but less complicated, due to the fact that the Ethernet protocol
+is much simpler than the IP protocol.
+.SS CHAINS
+There are two ebtables tables with built-in chains in the
+Linux kernel. These tables are used to divide functionality into
+different sets of rules. Each set of rules is called a chain.
+Each chain is an ordered list of rules that can match Ethernet frames. If a
+rule matches an Ethernet frame, then a processing specification tells
+what to do with that matching frame. The processing specification is
+called a 'target'. However, if the frame does not match the current
+rule in the chain, then the next rule in the chain is examined and so forth.
+The user can create new (user-defined) chains that can be used as the 'target'
+of a rule. User-defined chains are very useful to get better performance
+over the linear traversal of the rules and are also essential for structuring
+the filtering rules into well-organized and maintainable sets of rules.
+.SS TARGETS
+A firewall rule specifies criteria for an Ethernet frame and a frame
+processing specification called a target.  When a frame matches a rule,
+then the next action performed by the kernel is specified by the target.
+The target can be one of these values:
+.BR ACCEPT ,
+.BR DROP ,
+.BR CONTINUE ,
+.BR RETURN ,
+an 'extension' (see below) or a jump to a user-defined chain.
+.PP
+.B ACCEPT
+means to let the frame through.
+.B DROP
+means the frame has to be dropped.
+.B CONTINUE
+means the next rule has to be checked. This can be handy, f.e., to know how many
+frames pass a certain point in the chain, to log those frames or to apply multiple
+targets on a frame.
+.B RETURN
+means stop traversing this chain and resume at the next rule in the
+previous (calling) chain.
+For the extension targets please refer to the
+.B "TARGET EXTENSIONS"
+section of this man page.
+.SS TABLES
+As stated earlier, there are two ebtables tables in the Linux
+kernel.  The table names are
+.BR filter " and " nat .
+Of these two tables,
+the filter table is the default table that the command operates on.
+If you are working with the filter table, then you can drop the '-t filter'
+argument to the ebtables command.  However, you will need to provide
+the -t argument for
+.B nat
+table.  Moreover, the -t argument must be the
+first argument on the ebtables command line, if used. 
+.TP
+.B "-t, --table"
+.br
+.B filter
+is the default table and contains three built-in chains:
+.B INPUT 
+(for frames destined for the bridge itself, on the level of the MAC destination address), 
+.B OUTPUT 
+(for locally-generated or (b)routed frames) and
+.B FORWARD 
+(for frames being forwarded by the bridge).
+.br
+.br
+.B nat
+is mostly used to change the mac addresses and contains three built-in chains:
+.B PREROUTING 
+(for altering frames as soon as they come in), 
+.B OUTPUT 
+(for altering locally generated or (b)routed frames before they are bridged) and 
+.B POSTROUTING
+(for altering frames as they are about to go out). A small note on the naming
+of chains PREROUTING and POSTROUTING: it would be more accurate to call them
+PREFORWARDING and POSTFORWARDING, but for all those who come from the
+iptables world to ebtables it is easier to have the same names. Note that you
+can change the name
+.BR "" ( -E )
+if you don't like the default.
+.SH EBTABLES COMMAND LINE ARGUMENTS
+After the initial ebtables '-t table' command line argument, the remaining
+arguments can be divided into several groups.  These groups
+are commands, miscellaneous commands, rule specifications, match extensions,
+watcher extensions and target extensions.
+.SS COMMANDS
+The ebtables command arguments specify the actions to perform on the table
+defined with the -t argument.  If you do not use the -t argument to name
+a table, the commands apply to the default filter table.
+Only one command may be used on the command line at a time, except when
+the commands
+.BR -L " and " -Z
+are combined, the commands
+.BR -N " and " -P
+are combined, or when
+.B --atomic-file
+is used.
+.TP
+.B "-A, --append"
+Append a rule to the end of the selected chain.
+.TP
+.B "-D, --delete"
+Delete the specified rule or rules from the selected chain. There are two ways to
+use this command. The first is by specifying an interval of rule numbers
+to delete (directly after
+.BR -D ).
+Syntax: \fIstart_nr\fP[\fI:end_nr\fP] (use
+.B -L --Ln
+to list the rules with their rule number). When \fIend_nr\fP is omitted, all rules starting
+from \fIstart_nr\fP are deleted. Using negative numbers is allowed, for more
+details about using negative numbers, see the
+.B -I
+command. The second usage is by
+specifying the complete rule as it would have been specified when it was added. Only
+the first encountered rule that is the same as this specified rule, in other
+words the matching rule with the lowest (positive) rule number, is deleted.
+.TP
+.B "-C, --change-counters"
+Change the counters of the specified rule or rules from the selected chain. There are two ways to
+use this command. The first is by specifying an interval of rule numbers
+to do the changes on (directly after
+.BR -C ).
+Syntax: \fIstart_nr\fP[\fI:end_nr\fP] (use
+.B -L --Ln
+to list the rules with their rule number). The details are the same as for the
+.BR -D " command. The second usage is by"
+specifying the complete rule as it would have been specified when it was added. Only
+the counters of the first encountered rule that is the same as this specified rule, in other
+words the matching rule with the lowest (positive) rule number, are changed.
+In the first usage, the counters are specified directly after the interval specification,
+in the second usage directly after
+.BR -C .
+First the packet counter is specified, then the byte counter. If the specified counters start
+with a '+', the counter values are added to the respective current counter values.
+If the specified counters start with a '-', the counter values are decreased from the respective
+current counter values. No bounds checking is done. If the counters don't start with '+' or '-',
+the current counters are changed to the specified counters.
+.TP
+.B "-I, --insert"
+Insert the specified rule into the selected chain at the specified rule number. If the
+rule number is not specified, the rule is added at the head of the chain.
+If the current number of rules equals
+.IR N ,
+then the specified number can be
+between
+.IR -N " and " N+1 .
+For a positive number
+.IR i ,
+it holds that
+.IR i " and " i-N-1
+specify the same place in the chain where the rule should be inserted. The rule number
+0 specifies the place past the last rule in the chain and using this number is therefore
+equivalent to using the
+.BR -A " command."
+Rule numbers structly smaller than 0 can be useful when more than one rule needs to be inserted
+in a chain.
+.TP
+.B "-P, --policy"
+Set the policy for the chain to the given target. The policy can be
+.BR ACCEPT ", " DROP " or " RETURN .
+.TP
+.B "-F, --flush"
+Flush the selected chain. If no chain is selected, then every chain will be
+flushed. Flushing a chain does not change the policy of the
+chain, however.
+.TP
+.B "-Z, --zero"
+Set the counters of the selected chain to zero. If no chain is selected, all the counters
+are set to zero. The
+.B "-Z"
+command can be used in conjunction with the 
+.B "-L"
+command.
+When both the
+.B "-Z"
+and
+.B "-L"
+commands are used together in this way, the rule counters are printed on the screen
+before they are set to zero.
+.TP
+.B "-L, --list"
+List all rules in the selected chain. If no chain is selected, all chains
+are listed.
+.br
+The following options change the output of the
+.B "-L"
+command.
+.br
+.B "--Ln"
+.br
+Places the rule number in front of every rule. This option is incompatible with the
+.BR --Lx " option."
+.br
+.B "--Lc"
+.br
+Shows the counters at the end of each rule displayed by the
+.B "-L"
+command. Both a frame counter (pcnt) and a byte counter (bcnt) are displayed.
+The frame counter shows how many frames have matched the specific rule, the byte
+counter shows the sum of the frame sizes of these matching frames. Using this option
+.BR "" "in combination with the " --Lx " option causes the counters to be written out"
+.BR "" "in the '" -c " <pcnt> <bcnt>' option format."
+.br
+.B "--Lx"
+.br
+Changes the output so that it produces a set of ebtables commands that construct
+the contents of the chain, when specified.
+If no chain is specified, ebtables commands to construct the contents of the
+table are given, including commands for creating the user-defined chains (if any).
+You can use this set of commands in an ebtables boot or reload
+script.  For example the output could be used at system startup.
+The 
+.B "--Lx"
+option is incompatible with the
+.B "--Ln"
+listing option. Using the
+.BR --Lx " option together with the " --Lc " option will cause the counters to be written out"
+.BR "" "in the '" -c " <pcnt> <bcnt>' option format."
+.br
+.B "--Lmac2"
+.br
+Shows all MAC addresses with the same length, adding leading zeroes
+if necessary. The default representation omits leading zeroes in the addresses.
+.TP
+.B "-N, --new-chain"
+Create a new user-defined chain with the given name. The number of
+user-defined chains is limited only by the number of possible chain names.
+A user-defined chain name has a maximum
+length of 31 characters. The standard policy of the user-defined chain is
+ACCEPT. The policy of the new chain can be initialized to a different standard
+target by using the
+.B -P
+command together with the
+.B -N
+command. In this case, the chain name does not have to be specified for the
+.B -P
+command.
+.TP
+.B "-X, --delete-chain"
+Delete the specified user-defined chain. There must be no remaining references (jumps)
+to the specified chain, otherwise ebtables will refuse to delete it. If no chain is
+specified, all user-defined chains that aren't referenced will be removed.
+.TP
+.B "-E, --rename-chain"
+Rename the specified chain to a new name.  Besides renaming a user-defined
+chain, you can rename a standard chain to a name that suits your
+taste. For example, if you like PREFORWARDING more than PREROUTING,
+then you can use the -E command to rename the PREROUTING chain. If you do
+rename one of the standard ebtables chain names, please be sure to mention
+this fact should you post a question on the ebtables mailing lists.
+It would be wise to use the standard name in your post. Renaming a standard
+ebtables chain in this fashion has no effect on the structure or functioning
+of the ebtables kernel table.
+.TP
+.B "--init-table"
+Replace the current table data by the initial table data.
+.TP
+.B "--atomic-init"
+Copy the kernel's initial data of the table to the specified
+file. This can be used as the first action, after which rules are added
+to the file. The file can be specified using the
+.B --atomic-file
+command or through the
+.IR EBTABLES_ATOMIC_FILE " environment variable."
+.TP
+.B "--atomic-save"
+Copy the kernel's current data of the table to the specified
+file. This can be used as the first action, after which rules are added
+to the file. The file can be specified using the
+.B --atomic-file
+command or through the
+.IR EBTABLES_ATOMIC_FILE " environment variable."
+.TP
+.B "--atomic-commit"
+Replace the kernel table data with the data contained in the specified
+file. This is a useful command that allows you to load all your rules of a
+certain table into the kernel at once, saving the kernel a lot of precious
+time and allowing atomic updates of the tables. The file which contains
+the table data is constructed by using either the
+.B "--atomic-init"
+or the
+.B "--atomic-save"
+command to generate a starting file. After that, using the
+.B "--atomic-file"
+command when constructing rules or setting the
+.IR EBTABLES_ATOMIC_FILE " environment variable"
+allows you to extend the file and build the complete table before
+committing it to the kernel. This command can be very useful in boot scripts
+to populate the ebtables tables in a fast way.
+.SS MISCELLANOUS COMMANDS
+.TP
+.B "-V, --version"
+Show the version of the ebtables userspace program.
+.TP
+.BR "-h, --help " "[\fIlist of module names\fP]"
+Give a brief description of the command syntax. Here you can also specify
+names of extensions and ebtables will try to write help about those
+extensions. E.g.
+.IR "ebtables -h snat log ip arp" .
+Specify
+.I list_extensions
+to list all extensions supported by the userspace
+utility.
+.TP
+.BR "-j, --jump " "\fItarget\fP"
+The target of the rule. This is one of the following values:
+.BR ACCEPT ,
+.BR DROP ,
+.BR CONTINUE ,
+.BR RETURN ,
+a target extension (see
+.BR "TARGET EXTENSIONS" ")"
+or a user-defined chain name.
+.TP
+.B --atomic-file "\fIfile\fP"
+Let the command operate on the specified
+.IR file .
+The data of the table to
+operate on will be extracted from the file and the result of the operation
+will be saved back into the file. If specified, this option should come
+before the command specification. An alternative that should be preferred,
+is setting the
+.IR EBTABLES_ATOMIC_FILE " environment variable."
+.TP
+.B -M, --modprobe "\fIprogram\fP"
+When talking to the kernel, use this
+.I program
+to try to automatically load missing kernel modules.
+.TP
+.B --concurrent
+Use a file lock to support concurrent scripts updating the ebtables kernel tables.
+
+.SS
+RULE SPECIFICATIONS
+The following command line arguments make up a rule specification (as used 
+in the add and delete commands). A "!" option before the specification 
+inverts the test for that specification. Apart from these standard rule 
+specifications there are some other command line arguments of interest.
+See both the 
+.BR "MATCH EXTENSIONS" 
+and the
+.BR "WATCHER EXTENSIONS" 
+below.
+.TP
+.BR "-p, --protocol " "[!] \fIprotocol\fP"
+The protocol that was responsible for creating the frame. This can be a
+hexadecimal number, above 
+.IR 0x0600 ,
+a name (e.g.
+.I ARP
+) or
+.BR LENGTH .
+The protocol field of the Ethernet frame can be used to denote the
+length of the header (802.2/802.3 networks). When the value of that field is
+below or equals
+.IR 0x0600 ,
+the value equals the size of the header and shouldn't be used as a
+protocol number. Instead, all frames where the protocol field is used as
+the length field are assumed to be of the same 'protocol'. The protocol
+name used in ebtables for these frames is
+.BR LENGTH .
+.br
+The file
+.B /etc/ethertypes
+can be used to show readable
+characters instead of hexadecimal numbers for the protocols. For example,
+.I 0x0800
+will be represented by 
+.IR IPV4 .
+The use of this file is not case sensitive. 
+See that file for more information. The flag 
+.B --proto
+is an alias for this option.
+.TP 
+.BR "-i, --in-interface " "[!] \fIname\fP"
+The interface (bridge port) via which a frame is received (this option is useful in the
+.BR INPUT ,
+.BR FORWARD ,
+.BR PREROUTING " and " BROUTING
+chains). If the interface name ends with '+', then
+any interface name that begins with this name (disregarding '+') will match.
+The flag
+.B --in-if
+is an alias for this option.
+.TP
+.BR "--logical-in " "[!] \fIname\fP"
+The (logical) bridge interface via which a frame is received (this option is useful in the
+.BR INPUT ,
+.BR FORWARD ,
+.BR PREROUTING " and " BROUTING
+chains).
+If the interface name ends with '+', then
+any interface name that begins with this name (disregarding '+') will match.
+.TP
+.BR "-o, --out-interface " "[!] \fIname\fP"
+The interface (bridge port) via which a frame is going to be sent (this option is useful in the
+.BR OUTPUT ,
+.B FORWARD
+and
+.B POSTROUTING
+chains). If the interface name ends with '+', then
+any interface name that begins with this name (disregarding '+') will match.
+The flag
+.B --out-if
+is an alias for this option.
+.TP
+.BR "--logical-out " "[!] \fIname\fP"
+The (logical) bridge interface via which a frame is going to be sent (this option
+is useful in the
+.BR OUTPUT ,
+.B FORWARD
+and
+.B POSTROUTING
+chains).
+If the interface name ends with '+', then
+any interface name that begins with this name (disregarding '+') will match.
+.TP
+.BR "-s, --source " "[!] \fIaddress\fP[/\fImask\fP]"
+The source MAC address. Both mask and address are written as 6 hexadecimal
+numbers separated by colons. Alternatively one can specify Unicast,
+Multicast, Broadcast or BGA (Bridge Group Address):
+.br
+.IR "Unicast" "=00:00:00:00:00:00/01:00:00:00:00:00,"
+.IR "Multicast" "=01:00:00:00:00:00/01:00:00:00:00:00,"
+.IR "Broadcast" "=ff:ff:ff:ff:ff:ff/ff:ff:ff:ff:ff:ff or"
+.IR "BGA" "=01:80:c2:00:00:00/ff:ff:ff:ff:ff:ff."
+Note that a broadcast
+address will also match the multicast specification. The flag
+.B --src
+is an alias for this option.
+.TP
+.BR "-d, --destination " "[!] \fIaddress\fP[/\fImask\fP]"
+The destination MAC address. See
+.B -s
+(above) for more details on MAC addresses. The flag
+.B --dst
+is an alias for this option.
+.TP
+.BR "-c, --set-counter " "\fIpcnt bcnt\fP"
+If used with
+.BR -A " or " -I ", then the packet and byte counters of the new rule will be set to
+.IR pcnt ", resp. " bcnt ".
+If used with the
+.BR -C " or " -D " commands, only rules with a packet and byte count equal to"
+.IR pcnt ", resp. " bcnt " will match."
+
+.SS MATCH EXTENSIONS
+Ebtables extensions are dynamically loaded into the userspace tool,
+there is therefore no need to explicitly load them with a
+-m option like is done in iptables.
+These extensions deal with functionality supported by kernel modules supplemental to
+the core ebtables code.
+.SS 802_3
+Specify 802.3 DSAP/SSAP fields or SNAP type.  The protocol must be specified as
+.IR "LENGTH " "(see the option " " -p " above).
+.TP
+.BR "--802_3-sap " "[!] \fIsap\fP"
+DSAP and SSAP are two one byte 802.3 fields.  The bytes are always
+equal, so only one byte (hexadecimal) is needed as an argument.
+.TP
+.BR "--802_3-type " "[!] \fItype\fP"
+If the 802.3 DSAP and SSAP values are 0xaa then the SNAP type field must
+be consulted to determine the payload protocol.  This is a two byte
+(hexadecimal) argument.  Only 802.3 frames with DSAP/SSAP 0xaa are
+checked for type.
+.SS among
+Match a MAC address or MAC/IP address pair versus a list of MAC addresses
+and MAC/IP address pairs.
+A list entry has the following format:
+.IR xx:xx:xx:xx:xx:xx[=ip.ip.ip.ip][,] ". Multiple"
+list entries are separated by a comma, specifying an IP address corresponding to
+the MAC address is optional. Multiple MAC/IP address pairs with the same MAC address
+but different IP address (and vice versa) can be specified. If the MAC address doesn't
+match any entry from the list, the frame doesn't match the rule (unless "!" was used).
+.TP
+.BR "--among-dst " "[!] \fIlist\fP"
+Compare the MAC destination to the given list. If the Ethernet frame has type
+.IR IPv4 " or " ARP ,
+then comparison with MAC/IP destination address pairs from the
+list is possible.
+.TP
+.BR "--among-src " "[!] \fIlist\fP"
+Compare the MAC source to the given list. If the Ethernet frame has type
+.IR IPv4 " or " ARP ,
+then comparison with MAC/IP source address pairs from the list
+is possible.
+.TP
+.BR "--among-dst-file " "[!] \fIfile\fP"
+Same as
+.BR --among-dst " but the list is read in from the specified file."
+.TP
+.BR "--among-src-file " "[!] \fIfile\fP"
+Same as
+.BR --among-src " but the list is read in from the specified file."
+.SS arp
+Specify (R)ARP fields. The protocol must be specified as
+.IR ARP " or " RARP .
+.TP
+.BR "--arp-opcode " "[!] \fIopcode\fP"
+The (R)ARP opcode (decimal or a string, for more details see
+.BR "ebtables -h arp" ).
+.TP
+.BR "--arp-htype " "[!] \fIhardware type\fP"
+The hardware type, this can be a decimal or the string
+.I Ethernet
+(which sets
+.I type
+to 1). Most (R)ARP packets have Eternet as hardware type.
+.TP
+.BR "--arp-ptype " "[!] \fIprotocol type\fP"
+The protocol type for which the (r)arp is used (hexadecimal or the string
+.IR IPv4 ,
+denoting 0x0800).
+Most (R)ARP packets have protocol type IPv4.
+.TP
+.BR "--arp-ip-src " "[!] \fIaddress\fP[/\fImask\fP]"
+The (R)ARP IP source address specification.
+.TP
+.BR "--arp-ip-dst " "[!] \fIaddress\fP[/\fImask\fP]"
+The (R)ARP IP destination address specification.
+.TP
+.BR "--arp-mac-src " "[!] \fIaddress\fP[/\fImask\fP]"
+The (R)ARP MAC source address specification.
+.TP
+.BR "--arp-mac-dst " "[!] \fIaddress\fP[/\fImask\fP]"
+The (R)ARP MAC destination address specification.
+.TP
+.BR "" "[!]" " --arp-gratuitous"
+Checks for ARP gratuitous packets: checks equality of IPv4 source
+address and IPv4 destination address inside the ARP header.
+.SS ip
+Specify IPv4 fields. The protocol must be specified as
+.IR IPv4 .
+.TP
+.BR "--ip-source " "[!] \fIaddress\fP[/\fImask\fP]"
+The source IP address.
+The flag
+.B --ip-src
+is an alias for this option.
+.TP
+.BR "--ip-destination " "[!] \fIaddress\fP[/\fImask\fP]"
+The destination IP address.
+The flag
+.B --ip-dst
+is an alias for this option.
+.TP
+.BR "--ip-tos " "[!] \fItos\fP"
+The IP type of service, in hexadecimal numbers.
+.BR IPv4 .
+.TP
+.BR "--ip-protocol " "[!] \fIprotocol\fP"
+The IP protocol.
+The flag
+.B --ip-proto
+is an alias for this option.
+.TP
+.BR "--ip-source-port " "[!] \fIport1\fP[:\fIport2\fP]"
+The source port or port range for the IP protocols 6 (TCP), 17
+(UDP), 33 (DCCP) or 132 (SCTP). The
+.B --ip-protocol
+option must be specified as
+.IR TCP ", " UDP ", " DCCP " or " SCTP .
+If
+.IR port1 " is omitted, " 0:port2 " is used; if " port2 " is omitted but a colon is specified, " port1:65535 " is used."
+The flag
+.B --ip-sport
+is an alias for this option.
+.TP
+.BR "--ip-destination-port " "[!] \fIport1\fP[:\fIport2\fP]"
+The destination port or port range for ip protocols 6 (TCP), 17
+(UDP), 33 (DCCP) or 132 (SCTP). The
+.B --ip-protocol
+option must be specified as
+.IR TCP ", " UDP ", " DCCP " or " SCTP .
+If
+.IR port1 " is omitted, " 0:port2 " is used; if " port2 " is omitted but a colon is specified, " port1:65535 " is used."
+The flag
+.B --ip-dport
+is an alias for this option.
+.SS ip6
+Specify IPv6 fields. The protocol must be specified as
+.IR IPv6 .
+.TP
+.BR "--ip6-source " "[!] \fIaddress\fP[/\fImask\fP]"
+The source IPv6 address.
+The flag
+.B --ip6-src
+is an alias for this option.
+.TP
+.BR "--ip6-destination " "[!] \fIaddress\fP[/\fImask\fP]"
+The destination IPv6 address.
+The flag
+.B --ip6-dst
+is an alias for this option.
+.TP
+.BR "--ip6-tclass " "[!] \fItclass\fP"
+The IPv6 traffic class, in hexadecimal numbers.
+.TP
+.BR "--ip6-protocol " "[!] \fIprotocol\fP"
+The IP protocol.
+The flag
+.B --ip6-proto
+is an alias for this option.
+.TP
+.BR "--ip6-source-port " "[!] \fIport1\fP[:\fIport2\fP]"
+The source port or port range for the IPv6 protocols 6 (TCP), 17
+(UDP), 33 (DCCP) or 132 (SCTP). The
+.B --ip6-protocol
+option must be specified as
+.IR TCP ", " UDP ", " DCCP " or " SCTP .
+If
+.IR port1 " is omitted, " 0:port2 " is used; if " port2 " is omitted but a colon is specified, " port1:65535 " is used."
+The flag
+.B --ip6-sport
+is an alias for this option.
+.TP
+.BR "--ip6-destination-port " "[!] \fIport1\fP[:\fIport2\fP]"
+The destination port or port range for IPv6 protocols 6 (TCP), 17
+(UDP), 33 (DCCP) or 132 (SCTP). The
+.B --ip6-protocol
+option must be specified as
+.IR TCP ", " UDP ", " DCCP " or " SCTP .
+If
+.IR port1 " is omitted, " 0:port2 " is used; if " port2 " is omitted but a colon is specified, " port1:65535 " is used."
+The flag
+.B --ip6-dport
+is an alias for this option.
+.TP
+.BR "--ip6-icmp-type " "[!] {\fItype\fP[:\fItype\fP]/\fIcode\fP[:\fIcode\fP]|\fItypename\fP}"
+Specify ipv6\-icmp type and code to match.
+Ranges for both type and code are supported. Type and code are
+separated by a slash. Valid numbers for type and range are 0 to 255.
+To match a single type including all valid codes, symbolic names can
+be used instead of numbers. The list of known type names is shown by the command
+.nf
+  ebtables \-\-help ip6
+.fi
+This option is only valid for \-\-ip6-prococol ipv6-icmp.
+.SS limit
+This module matches at a limited rate using a token bucket filter.
+A rule using this extension will match until this limit is reached.
+It can be used with the
+.B --log
+watcher to give limited logging, for example. Its use is the same
+as the limit match of iptables.
+.TP
+.BR "--limit " "[\fIvalue\fP]"
+Maximum average matching rate: specified as a number, with an optional
+.IR /second ", " /minute ", " /hour ", or " /day " suffix; the default is " 3/hour .
+.TP
+.BR "--limit-burst " "[\fInumber\fP]"
+Maximum initial number of packets to match: this number gets recharged by
+one every time the limit specified above is not reached, up to this
+number; the default is
+.IR 5 .
+.SS mark_m
+.TP
+.BR "--mark " "[!] [\fIvalue\fP][/\fImask\fP]"
+Matches frames with the given unsigned mark value. If a
+.IR value " and " mask " are specified, the logical AND of the mark value of the frame and"
+the user-specified
+.IR mask " is taken before comparing it with the"
+user-specified mark
+.IR value ". When only a mark "
+.IR value " is specified, the packet"
+only matches when the mark value of the frame equals the user-specified
+mark
+.IR value .
+If only a
+.IR mask " is specified, the logical"
+AND of the mark value of the frame and the user-specified
+.IR mask " is taken and the frame matches when the result of this logical AND is"
+non-zero. Only specifying a
+.IR mask " is useful to match multiple mark values."
+.SS pkttype
+.TP
+.BR "--pkttype-type " "[!] \fItype\fP"
+Matches on the Ethernet "class" of the frame, which is determined by the
+generic networking code. Possible values:
+.IR broadcast " (MAC destination is the broadcast address),"
+.IR multicast " (MAC destination is a multicast address),"
+.IR host " (MAC destination is the receiving network device), or "
+.IR otherhost " (none of the above)."
+.SS stp
+Specify stp BPDU (bridge protocol data unit) fields. The destination
+address
+.BR "" ( -d ") must be specified as the bridge group address"
+.IR "" ( BGA ).
+For all options for which a range of values can be specified, it holds that
+if the lower bound is omitted (but the colon is not), then the lowest possible lower bound
+for that option is used, while if the upper bound is omitted (but the colon again is not), the
+highest possible upper bound for that option is used.
+.TP
+.BR "--stp-type " "[!] \fItype\fP"
+The BPDU type (0-255), recognized non-numerical types are
+.IR config ", denoting a configuration BPDU (=0), and"
+.IR tcn ", denothing a topology change notification BPDU (=128)."
+.TP
+.BR "--stp-flags " "[!] \fIflag\fP"
+The BPDU flag (0-255), recognized non-numerical flags are
+.IR topology-change ", denoting the topology change flag (=1), and"
+.IR topology-change-ack ", denoting the topology change acknowledgement flag (=128)."
+.TP
+.BR "--stp-root-prio " "[!] [\fIprio\fP][:\fIprio\fP]"
+The root priority (0-65535) range.
+.TP
+.BR "--stp-root-addr " "[!] [\fIaddress\fP][/\fImask\fP]"
+The root mac address, see the option
+.BR -s " for more details."
+.TP
+.BR "--stp-root-cost " "[!] [\fIcost\fP][:\fIcost\fP]"
+The root path cost (0-4294967295) range.
+.TP
+.BR "--stp-sender-prio " "[!] [\fIprio\fP][:\fIprio\fP]"
+The BPDU's sender priority (0-65535) range.
+.TP
+.BR "--stp-sender-addr " "[!] [\fIaddress\fP][/\fImask\fP]"
+The BPDU's sender mac address, see the option
+.BR -s " for more details."
+.TP
+.BR "--stp-port " "[!] [\fIport\fP][:\fIport\fP]"
+The port identifier (0-65535) range.
+.TP
+.BR "--stp-msg-age " "[!] [\fIage\fP][:\fIage\fP]"
+The message age timer (0-65535) range.
+.TP
+.BR "--stp-max-age " "[!] [\fIage\fP][:\fIage\fP]"
+The max age timer (0-65535) range.
+.TP
+.BR "--stp-hello-time " "[!] [\fItime\fP][:\fItime\fP]"
+The hello time timer (0-65535) range.
+.TP
+.BR "--stp-forward-delay " "[!] [\fIdelay\fP][:\fIdelay\fP]"
+The forward delay timer (0-65535) range.
+.\" .SS string
+.\" This module matches on a given string using some pattern matching strategy.
+.\" .TP
+.\" .BR "--string-algo " "\fIalgorithm\fP"
+.\" The pattern matching strategy. (bm = Boyer-Moore, kmp = Knuth-Pratt-Morris)
+.\" .TP
+.\" .BR "--string-from " "\fIoffset\fP"
+.\" The lowest offset from which a match can start. (default: 0)
+.\" .TP
+.\" .BR "--string-to " "\fIoffset\fP"
+.\" The highest offset from which a match can start. (default: size of frame)
+.\" .TP
+.\" .BR "--string " "[!] \fIpattern\fP"
+.\" Matches the given pattern.
+.\" .TP
+.\" .BR "--string-hex " "[!] \fIpattern\fP"
+.\" Matches the given pattern in hex notation, e.g. '|0D 0A|', '|0D0A|', 'www|09|netfilter|03|org|00|'
+.\" .TP
+.\" .BR "--string-icase"
+.\" Ignore case when searching.
+.SS vlan
+Specify 802.1Q Tag Control Information fields.
+The protocol must be specified as
+.IR 802_1Q " (0x8100)."
+.TP
+.BR "--vlan-id " "[!] \fIid\fP"
+The VLAN identifier field (VID). Decimal number from 0 to 4095.
+.TP
+.BR "--vlan-prio " "[!] \fIprio\fP"
+The user priority field, a decimal number from 0 to 7.
+The VID should be set to 0 ("null VID") or unspecified
+(in the latter case the VID is deliberately set to 0).
+.TP
+.BR "--vlan-encap " "[!] \fItype\fP"
+The encapsulated Ethernet frame type/length.
+Specified as a hexadecimal
+number from 0x0000 to 0xFFFF or as a symbolic name
+from
+.BR /etc/ethertypes .
+
+.SS WATCHER EXTENSIONS
+Watchers only look at frames passing by, they don't modify them nor decide
+to accept the frames or not. These watchers only
+see the frame if the frame matches the rule, and they see it before the
+target is executed.
+.SS log
+The log watcher writes descriptive data about a frame to the syslog.
+.TP
+.B "--log"
+.br
+Log with the default loggin options: log-level=
+.IR info ,
+log-prefix="", no ip logging, no arp logging.
+.TP
+.B --log-level "\fIlevel\fP"
+.br
+Defines the logging level. For the possible values, see
+.BR "ebtables -h log" .
+The default level is 
+.IR info .
+.TP
+.BR --log-prefix " \fItext\fP"
+.br
+Defines the prefix
+.I text
+to be printed at the beginning of the line with the logging information.
+.TP
+.B --log-ip 
+.br
+Will log the ip information when a frame made by the ip protocol matches 
+the rule. The default is no ip information logging.
+.TP
+.B --log-ip6 
+.br
+Will log the ipv6 information when a frame made by the ipv6 protocol matches 
+the rule. The default is no ipv6 information logging.
+.TP
+.B --log-arp
+.br
+Will log the (r)arp information when a frame made by the (r)arp protocols
+matches the rule. The default is no (r)arp information logging.
+.SS nflog
+The nflog watcher passes the packet to the loaded logging backend
+in order to log the packet. This is usually used in combination with
+nfnetlink_log as logging backend, which will multicast the packet
+through a
+.IR netlink
+socket to the specified multicast group. One or more userspace processes
+may subscribe to the group to receive the packets.
+.TP
+.B "--nflog"
+.br
+Log with the default logging options
+.TP
+.B --nflog-group "\fInlgroup\fP"
+.br
+The netlink group (1 - 2^32-1) to which packets are (only applicable for
+nfnetlink_log). The default value is 1.
+.TP
+.B --nflog-prefix "\fIprefix\fP"
+.br
+A prefix string to include in the log message, up to 30 characters
+long, useful for distinguishing messages in the logs.
+.TP
+.B --nflog-range "\fIsize\fP"
+.br
+The number of bytes to be copied to userspace (only applicable for
+nfnetlink_log). nfnetlink_log instances may specify their own
+range, this option overrides it.
+.TP
+.B --nflog-threshold "\fIsize\fP"
+.br
+Number of packets to queue inside the kernel before sending them
+to userspace (only applicable for nfnetlink_log). Higher values
+result in less overhead per packet, but increase delay until the
+packets reach userspace. The default value is 1.
+.SS ulog
+The ulog watcher passes the packet to a userspace
+logging daemon using netlink multicast sockets. This differs
+from the log watcher in the sense that the complete packet is
+sent to userspace instead of a descriptive text and that
+netlink multicast sockets are used instead of the syslog.
+This watcher enables parsing of packets with userspace programs, the
+physical bridge in and out ports are also included in the netlink messages.
+The ulog watcher module accepts 2 parameters when the module is loaded
+into the kernel (e.g. with modprobe):
+.B nlbufsiz
+specifies how big the buffer for each netlink multicast
+group is. If you say
+.IR nlbufsiz=8192 ,
+for example, up to eight kB of packets will
+get accumulated in the kernel until they are sent to userspace. It is
+not possible to allocate more than 128kB. Please also keep in mind that
+this buffer size is allocated for each nlgroup you are using, so the
+total kernel memory usage increases by that factor. The default is 4096.
+.B flushtimeout
+specifies after how many hundredths of a second the queue should be
+flushed, even if it is not full yet. The default is 10 (one tenth of
+a second).
+.TP
+.B "--ulog"
+.br
+Use the default settings: ulog-prefix="", ulog-nlgroup=1,
+ulog-cprange=4096, ulog-qthreshold=1.
+.TP
+.B --ulog-prefix "\fItext\fP"
+.br
+Defines the prefix included with the packets sent to userspace.
+.TP
+.BR --ulog-nlgroup " \fIgroup\fP"
+.br
+Defines which netlink group number to use (a number from 1 to 32).
+Make sure the netlink group numbers used for the iptables ULOG
+target differ from those used for the ebtables ulog watcher.
+The default group number is 1.
+.TP
+.BR --ulog-cprange " \fIrange\fP"
+.br
+Defines the maximum copy range to userspace, for packets matching the
+rule. The default range is 0, which means the maximum copy range is
+given by
+.BR nlbufsiz .
+A maximum copy range larger than
+128*1024 is meaningless as the packets sent to userspace have an upper
+size limit of 128*1024.
+.TP
+.BR --ulog-qthreshold " \fIthreshold\fP"
+.br
+Queue at most
+.I threshold
+number of packets before sending them to
+userspace with a netlink socket. Note that packets can be sent to
+userspace before the queue is full, this happens when the ulog
+kernel timer goes off (the frequency of this timer depends on
+.BR flushtimeout ).
+.SS TARGET EXTENSIONS
+.SS arpreply
+The
+.B arpreply
+target can be used in the
+.BR PREROUTING " chain of the " nat " table."
+If this target sees an ARP request it will automatically reply
+with an ARP reply. The used MAC address for the reply can be specified.
+The protocol must be specified as
+.IR ARP .
+When the ARP message is not an ARP request or when the ARP request isn't
+for an IP address on an Ethernet network, it is ignored by this target
+.BR "" ( CONTINUE ).
+When the ARP request is malformed, it is dropped
+.BR "" ( DROP ).
+.TP
+.BR "--arpreply-mac " "\fIaddress\fP"
+Specifies the MAC address to reply with: the Ethernet source MAC and the
+ARP payload source MAC will be filled in with this address.
+.TP
+.BR "--arpreply-target " "\fItarget\fP"
+Specifies the standard target. After sending the ARP reply, the rule still
+has to give a standard target so ebtables knows what to do with the ARP request.
+The default target
+.BR "" "is " DROP .
+.SS dnat
+The
+.B dnat
+target can only be used in the
+.BR PREROUTING " and " OUTPUT " chains of the " nat " table."
+It specifies that the destination MAC address has to be changed.
+.TP
+.BR "--to-destination " "\fIaddress\fP"
+.br
+Change the destination MAC address to the specified
+.IR address .
+The flag
+.B --to-dst
+is an alias for this option.
+.TP
+.BR "--dnat-target " "\fItarget\fP"
+.br
+Specifies the standard target. After doing the dnat, the rule still has to
+give a standard target so ebtables knows what to do with the dnated frame.
+The default target is
+.BR ACCEPT .
+Making it
+.BR CONTINUE " could let you use"
+multiple target extensions on the same frame. Making it
+.BR DROP " only makes"
+sense in the
+.BR BROUTING " chain but using the " redirect " target is more logical there. " RETURN " is also allowed. Note that using " RETURN
+in a base chain is not allowed (for obvious reasons).
+.SS mark
+.BR "" "The " mark " target can be used in every chain of every table. It is possible"
+to use the marking of a frame/packet in both ebtables and iptables,
+if the bridge-nf code is compiled into the kernel. Both put the marking at the
+same place. This allows for a form of communication between ebtables and iptables.
+.TP
+.BR "--mark-set " "\fIvalue\fP"
+.br
+Mark the frame with the specified non-negative
+.IR value .
+.TP
+.BR "--mark-or " "\fIvalue\fP"
+.br
+Or the frame with the specified non-negative
+.IR value .
+.TP
+.BR "--mark-and " "\fIvalue\fP"
+.br
+And the frame with the specified non-negative
+.IR value .
+.TP
+.BR "--mark-xor " "\fIvalue\fP"
+.br
+Xor the frame with the specified non-negative
+.IR value .
+.TP
+.BR "--mark-target " "\fItarget\fP"
+.br
+Specifies the standard target. After marking the frame, the rule
+still has to give a standard target so ebtables knows what to do.
+The default target is
+.BR ACCEPT ". Making it " CONTINUE " can let you do other"
+things with the frame in subsequent rules of the chain.
+.SS redirect
+The
+.B redirect
+target will change the MAC target address to that of the bridge device the
+frame arrived on. This target can only be used in the
+.BR PREROUTING " chain of the " nat " table."
+The MAC address of the bridge is used as destination address."
+.TP
+.BR "--redirect-target " "\fItarget\fP"
+.br
+Specifies the standard target. After doing the MAC redirect, the rule
+still has to give a standard target so ebtables knows what to do.
+The default target is
+.BR ACCEPT ". Making it " CONTINUE " could let you use"
+multiple target extensions on the same frame. Making it
+.BR DROP " in the " BROUTING " chain will let the frames be routed. " RETURN " is also allowed. Note"
+.BR "" "that using " RETURN " in a base chain is not allowed."
+.SS snat
+The
+.B snat
+target can only be used in the
+.BR POSTROUTING " chain of the " nat " table."
+It specifies that the source MAC address has to be changed.
+.TP
+.BR "--to-source " "\fIaddress\fP"
+.br
+Changes the source MAC address to the specified
+.IR address ". The flag"
+.B --to-src
+is an alias for this option.
+.TP
+.BR "--snat-target " "\fItarget\fP"
+.br
+Specifies the standard target. After doing the snat, the rule still has 
+to give a standard target so ebtables knows what to do.
+.BR "" "The default target is " ACCEPT ". Making it " CONTINUE " could let you use"
+.BR "" "multiple target extensions on the same frame. Making it " DROP " doesn't"
+.BR "" "make sense, but you could do that too. " RETURN " is also allowed. Note"
+.BR "" "that using " RETURN " in a base chain is not allowed."
+.br
+.TP
+.BR "--snat-arp "
+.br
+Also change the hardware source address inside the arp header if the packet is an
+arp message and the hardware address length in the arp header is 6 bytes.
+.br
+.SH FILES
+.I /etc/ethertypes
+.SH ENVIRONMENT VARIABLES
+.I EBTABLES_ATOMIC_FILE
+.SH MAILINGLISTS
+.BR "" "See " http://netfilter.org/mailinglists.html
+.SH BUGS
+The version of ebtables this man page ships with does not support the
+.B broute
+table. Also there is no support for
+.B string
+match. And finally, this list is probably not complete.
+.SH SEE ALSO
+.BR xtables-nft "(8), " iptables "(8), " ip (8)
+.PP
+.BR "" "See " https://wiki.nftables.org