diff options
Diffstat (limited to 'upstream/archlinux/man8/bridge.8')
| -rw-r--r-- | upstream/archlinux/man8/bridge.8 | 1535 |
1 files changed, 1535 insertions, 0 deletions
diff --git a/upstream/archlinux/man8/bridge.8 b/upstream/archlinux/man8/bridge.8 new file mode 100644 index 00000000..a60964bb --- /dev/null +++ b/upstream/archlinux/man8/bridge.8 @@ -0,0 +1,1535 @@ +.TH BRIDGE 8 "1 August 2012" "iproute2" "Linux" +.SH NAME +bridge \- show / manipulate bridge addresses and devices +.SH SYNOPSIS + +.ad l +.in +8 +.ti -8 +.B bridge +.RI "[ " OPTIONS " ] " OBJECT " { " COMMAND " | " +.BR help " }" +.sp + +.ti -8 +.IR OBJECT " := { " +.BR link " | " fdb " | " mdb " | " vlan " | " vni " | " monitor " }" +.sp + +.ti -8 +.IR OPTIONS " := { " +\fB\-V\fR[\fIersion\fR] | +\fB\-s\fR[\fItatistics\fR] | +\fB\-n\fR[\fIetns\fR] name | +\fB\-b\fR[\fIatch\fR] filename | +\fB\-c\fR[\fIolor\fR] | +\fB\-p\fR[\fIretty\fR] | +\fB\-j\fR[\fIson\fR] | +\fB\-o\fR[\fIneline\fR] } + +.ti -8 +.B "bridge link set" +.B dev +.IR DEV " [ " +.B cost +.IR COST " ] [ " +.B priority +.IR PRIO " ] [ " +.B state +.IR STATE " ] [ " +.BR guard " { " on " | " off " } ] [ " +.BR hairpin " { " on " | " off " } ] [ " +.BR fastleave " { " on " | " off " } ] [ " +.BR root_block " { " on " | " off " } ] [ " +.BR learning " { " on " | " off " } ] [ " +.BR learning_sync " { " on " | " off " } ] [ " +.BR flood " { " on " | " off " } ] [ " +.BR hwmode " { " vepa " | " veb " } ] [ " +.BR bcast_flood " { " on " | " off " } ] [ " +.BR mcast_flood " { " on " | " off " } ] [ " +.BR mcast_max_groups +.IR MAX_GROUPS " ] [" +.BR mcast_router +.IR MULTICAST_ROUTER " ] [" +.BR mcast_to_unicast " { " on " | " off " } ] [ " +.BR neigh_suppress " { " on " | " off " } ] [ " +.BR neigh_vlan_suppress " { " on " | " off " } ] [ " +.BR vlan_tunnel " { " on " | " off " } ] [ " +.BR isolated " { " on " | " off " } ] [ " +.BR locked " { " on " | " off " } ] [ " +.BR mab " { " on " | " off " } ] [ " +.B backup_port +.IR DEVICE " ] [" +.BR nobackup_port " ] [ " +.B backup_nhid +.IR NHID " ] [" +.BR self " ] [ " master " ]" + +.ti -8 +.BR "bridge link" " [ " show " ] [ " +.B dev +.IR DEV " ] [" +.B master +.IR DEVICE " ]" + +.ti -8 +.BR "bridge fdb" " { " add " | " append " | " del " | " replace " } " +.I LLADDR +.B dev +.IR DEV " { " +.BR local " | " static " | " dynamic " } [ " +.BR self " ] [ " master " ] [ " router " ] [ " use " ] [ " extern_learn " ] [ " sticky " ] [ " +.B src_vni +.IR VNI " ] { [" +.B dst +.IR IPADDR " ] [ " +.B vni +.IR VNI " ] [" +.B port +.IR PORT " ] [" +.B via +.IR DEVICE " ] | " +.B nhid +.IR NHID " } " + +.ti -8 +.BR "bridge fdb" " [ [ " show " ] [ " +.B br +.IR BRDEV " ] [ " +.B brport +.IR DEV " ] [ " +.B vlan +.IR VID " ] [ " +.B state +.IR STATE " ] [" +.B dynamic +.IR "] ]" + +.ti -8 +.BR "bridge fdb get" " [" +.B to +.IR "]" +.I LLADDR "[ " +.B br +.IR BRDEV " ]" +.B { brport | dev } +.IR DEV " [ " +.B vlan +.IR VID " ] [ " +.B vni +.IR VNI " ] [" +.BR self " ] [ " master " ] [ " dynamic " ]" + +.ti -8 +.BR "bridge fdb flush" +.B dev +.IR DEV " [ " +.B brport +.IR DEV " ] [ " +.B vlan +.IR VID " ] [ " +.B src_vni +.IR VNI " ] [ " +.B nhid +.IR NHID " ] [" +.B vni +.IR VNI " ] [ " +.B port +.IR PORT " ] [" +.B dst +.IR IPADDR " ] [ " +.BR self " ] [ " master " ] [ " +.BR [no]permanent " | " [no]static " | " [no]dynamic " ] [ " +.BR [no]added_by_user " ] [ " [no]extern_learn " ] [ " +.BR [no]sticky " ] [ " [no]offloaded " ] [ " [no]router " ]" + +.ti -8 +.BR "bridge mdb" " { " add " | " del " | " replace " } " +.B dev +.I DEV +.B port +.I PORT +.B grp +.IR GROUP " [ " +.B src +.IR SOURCE " ] [ " +.BR permanent " | " temp " ] [ " +.B vid +.IR VID " ] [ " +.BR filter_mode " { " include " | " exclude " } ] [ " +.B source_list +.IR SOURCE_LIST " ] [ " +.B proto +.IR PROTO " ] [ " +.B dst +.IR IPADDR " ] [ " +.B dst_port +.IR DST_PORT " ] [ " +.B vni +.IR VNI " ] [ " +.B src_vni +.IR SRC_VNI " ] [ " +.B via +.IR DEV " ] + +.ti -8 +.BR "bridge mdb show" " [ " +.B dev +.IR DEV " ]" + +.ti -8 +.B "bridge mdb get" +.BI dev " DEV " grp " GROUP " +.RB "[ " src +.IR SOURCE " ]" +.RB "[ " vid +.IR VID " ]" +.RB "[ " src_vni +.IR SRC_VNI " ]" + +.ti -8 +.BR "bridge vlan" " { " add " | " del " } " +.B dev +.I DEV +.B vid +.IR VID " [ " +.B tunnel_info +.IR TUNNEL_ID " ] [ " +.BR pvid " ] [ " untagged " ] [ " +.BR self " ] [ " master " ] " + +.ti -8 +.BR "bridge vlan set" +.B dev +.I DEV +.B vid +.IR VID " [ " +.B state +.IR STP_STATE " ] [ " +.B mcast_max_groups +.IR MAX_GROUPS " ] [ " +.B mcast_router +.IR MULTICAST_ROUTER " ] [ " +.BR neigh_suppress " { " on " | " off " } ]" + +.ti -8 +.BR "bridge vlan" " [ " show " | " tunnelshow " ] [ " +.B dev +.IR DEV " ]" + +.ti -8 +.BR "bridge vlan global set" +.B dev +.I DEV +.B vid +.IR VID " [ " +.B mcast_snooping +.IR MULTICAST_SNOOPING " ] [ " +.B mcast_querier +.IR MULTICAST_QUERIER " ] [ " +.B mcast_igmp_version +.IR IGMP_VERSION " ] [ " +.B mcast_mld_version +.IR MLD_VERSION " ] [ " +.B mcast_last_member_count +.IR LAST_MEMBER_COUNT " ] [ " +.B mcast_last_member_interval +.IR LAST_MEMBER_INTERVAL " ] [ " +.B mcast_startup_query_count +.IR STARTUP_QUERY_COUNT " ] [ " +.B mcast_startup_query_interval +.IR STARTUP_QUERY_INTERVAL " ] [ " +.B mcast_membership_interval +.IR MEMBERSHIP_INTERVAL " ] [ " +.B mcast_querier_interval +.IR QUERIER_INTERVAL " ] [ " +.B mcast_query_interval +.IR QUERY_INTERVAL " ] [ " +.B mcast_query_response_interval +.IR QUERY_RESPONSE_INTERVAL " ]" + +.ti -8 +.BR "bridge vlan global" " [ " show " ] [ " +.B dev +.IR DEV " ] [ " +.B vid +.IR VID " ]" + +.ti -8 +.BR "bridge vlan" " show " [ " +.B dev +.IR DEV " ]" + +.ti -8 +.BR "bridge vni" " { " add " | " del " } " +.B dev +.I DEV +.B vni +.IR VNI " [ { " +.B group | remote "} " +.IR IPADDR " ] " + +.ti -8 +.BR "bridge vni" " show " [ " +.B dev +.IR DEV " ]" + +.ti -8 +.BR "bridge monitor" " [ " all " | " neigh " | " link " | " mdb " | " vlan " ]" + +.SH OPTIONS + +.TP +.BR "\-V" , " -Version" +print the version of the +.B bridge +utility and exit. + +.TP +.BR "\-s" , " \-stats", " \-statistics" +output more information. If this option +is given multiple times, the amount of information increases. +As a rule, the information is statistics or some time values. + +.TP +.BR "\-d" , " \-details" +print detailed information about bridge vlan filter entries or MDB router ports. + +.TP +.BR "\-n" , " \-net" , " \-netns " <NETNS> +switches +.B bridge +to the specified network namespace +.IR NETNS . +Actually it just simplifies executing of: + +.B ip netns exec +.I NETNS +.B bridge +.RI "[ " OPTIONS " ] " OBJECT " { " COMMAND " | " +.BR help " }" + +to + +.B bridge +.RI "-n[etns] " NETNS " [ " OPTIONS " ] " OBJECT " { " COMMAND " | " +.BR help " }" + +.TP +.BR "\-b", " \-batch " <FILENAME> +Read commands from provided file or standard input and invoke them. +First failure will cause termination of bridge command. + +.TP +.B "\-force" +Don't terminate bridge command on errors in batch mode. +If there were any errors during execution of the commands, the application +return code will be non zero. + +.TP +.BR \-c [ color ][ = { always | auto | never } +Configure color output. If parameter is omitted or +.BR always , +color output is enabled regardless of stdout state. If parameter is +.BR auto , +stdout is checked to be a terminal before enabling color output. If parameter is +.BR never , +color output is disabled. If specified multiple times, the last one takes +precedence. This flag is ignored if +.B \-json +is also given. + +.TP +.BR "\-j", " \-json" +Output results in JavaScript Object Notation (JSON). + +.TP +.BR "\-p", " \-pretty" +When combined with -j generate a pretty JSON output. + +.TP +.BR "\-o", " \-oneline" +output each record on a single line, replacing line feeds +with the +.B '\e' +character. This is convenient when you want to count records +with +.BR wc (1) +or to +.BR grep (1) +the output. + + +.SH BRIDGE - COMMAND SYNTAX + +.SS +.I OBJECT + +.TP +.B link +- Bridge port. + +.TP +.B fdb +- Forwarding Database entry. + +.TP +.B mdb +- Multicast group database entry. + +.TP +.B vlan +- VLAN filter list. + +.TP +.B vni +- VNI filter list. + +.SS +.I COMMAND + +Specifies the action to perform on the object. +The set of possible actions depends on the object type. +As a rule, it is possible to +.BR "add" , " delete" +and +.B show +(or +.B list +) objects, but some objects do not allow all of these operations +or have some additional commands. The +.B help +command is available for all objects. It prints +out a list of available commands and argument syntax conventions. +.sp +If no command is given, some default command is assumed. +Usually it is +.B list +or, if the objects of this class cannot be listed, +.BR "help" . + +.SH bridge link - bridge port + +.B link +objects correspond to the port devices of the bridge. + +.P +The corresponding commands set and display port status and bridge specific +attributes. + +.SS bridge link set - set bridge specific attributes on a port + +.TP +.BI dev " NAME " +interface name of the bridge port + +.TP +.BI cost " COST " +the STP path cost of the specified port. + +.TP +.BI priority " PRIO " +the STP port priority. The priority value is an unsigned 8-bit quantity +(number between 0 and 255). This metric is used in the designated port an +droot port selection algorithms. + +.TP +.BI state " STATE " +the operation state of the port. Except state 0 (disable STP or BPDU filter feature), +this is primarily used by user space STP/RSTP +implementation. One may enter port state name (case insensitive), or one of the +numbers below. Negative inputs are ignored, and unrecognized names return an +error. + +.B 0 +- port is in STP +.B DISABLED +state. Make this port completely inactive for STP. This is also called +BPDU filter and could be used to disable STP on an untrusted port, like +a leaf virtual devices. +.sp + +.B 1 +- port is in STP +.B LISTENING +state. Only valid if STP is enabled on the bridge. In this +state the port listens for STP BPDUs and drops all other traffic frames. +.sp + +.B 2 +- port is in STP +.B LEARNING +state. Only valid if STP is enabled on the bridge. In this +state the port will accept traffic only for the purpose of updating MAC +address tables. +.sp + +.B 3 +- port is in STP +.B FORWARDING +state. Port is fully active. +.sp + +.B 4 +- port is in STP +.B BLOCKING +state. Only valid if STP is enabled on the bridge. This state +is used during the STP election process. In this state, port will only process +STP BPDUs. +.sp + +.TP +.BR "guard on " or " guard off " +Controls whether STP BPDUs will be processed by the bridge port. By default, +the flag is turned off allowed BPDU processing. Turning this flag on will +disables +the bridge port if a STP BPDU packet is received. + +If running Spanning Tree on bridge, hostile devices on the network +may send BPDU on a port and cause network failure. Setting +.B guard on +will detect and stop this by disabling the port. +The port will be restarted if link is brought down, or +removed and reattached. For example if guard is enable on +eth0: + +.B ip link set dev eth0 down; ip link set dev eth0 up + +.TP +.BR "hairpin on " or " hairpin off " +Controls whether traffic may be send back out of the port on which it was +received. This option is also called reflective relay mode, and is used to support +basic VEPA (Virtual Ethernet Port Aggregator) capabilities. +By default, this flag is turned off and the bridge will not forward +traffic back out of the receiving port. + +.TP +.BR "fastleave on " or " fastleave off " +This flag allows the bridge to immediately stop multicast traffic on a port +that receives IGMP Leave message. It is only used with IGMP snooping is +enabled on the bridge. By default the flag is off. + +.TP +.BR "root_block on " or " root_block off " +Controls whether a given port is allowed to become root port or not. Only used +when STP is enabled on the bridge. By default the flag is off. + +This feature is also called root port guard. +If BPDU is received from a leaf (edge) port, it should not +be elected as root port. This could be used if using STP on a bridge and the downstream bridges are not fully +trusted; this prevents a hostile guest from rerouting traffic. + +.TP +.BR "learning on " or " learning off " +Controls whether a given port will learn MAC addresses from received traffic or +not. If learning if off, the bridge will end up flooding any traffic for which +it has no FDB entry. By default this flag is on. + +.TP +.BR "learning_sync on " or " learning_sync off " +Controls whether a given port will sync MAC addresses learned on device port to +bridge FDB. + +.TP +.BR "flood on " or " flood off " +Controls whether unicast traffic for which there is no FDB entry will be +flooded towards this given port. By default this flag is on. + +.TP +.B hwmode +Some network interface cards support HW bridge functionality and they may be +configured in different modes. Currently support modes are: + +.B vepa +- Data sent between HW ports is sent on the wire to the external +switch. + +.B veb +- bridging happens in hardware. + +.TP +.BR "bcast_flood on " or " bcast_flood off " +Controls flooding of broadcast traffic on the given port. +By default this flag is on. + +.TP +.BR "mcast_flood on " or " mcast_flood off " +Controls whether multicast traffic for which there is no MDB entry will be +flooded towards this given port. By default this flag is on. + +.TP +.BI mcast_max_groups " MAX_GROUPS " +Sets the maximum number of MDB entries that can be registered for a given +port. Attempts to register more MDB entries at the port than this limit +allows will be rejected, whether they are done through netlink (e.g. the +\fBbridge\fR tool), or IGMP or MLD membership reports. Setting a limit to 0 +has the effect of disabling the limit. The default value is 0. See also the +\fBip link\fR option \fBmcast_hash_max\fR. + +.TP +.BI mcast_router " MULTICAST_ROUTER " +This flag is almost the same as the per-VLAN flag, see below, except its +value can only be set in the range 0-2. The default is +.B 1 +where the bridge figures out automatically where an IGMP/MLD querier, +MRDISC capable device, or PIM router, is located. Setting this flag to +.B 2 +is useful in cases where the multicast router does not indicate its +presence in any meaningful way (e.g. older versions of SMCRoute, or +mrouted), or when there is a need for forwarding both known and unknown +IP multicast to a secondary/backup router. + +.TP +.BR "mcast_to_unicast on " or " mcast_to_unicast off " +Controls whether a given port will replicate packets using unicast +instead of multicast. By default this flag is off. + +This is done by copying the packet per host and +changing the multicast destination MAC to a unicast one accordingly. + +.B mcast_to_unicast +works on top of the multicast snooping feature of +the bridge. Which means unicast copies are only delivered to hosts which +are interested in it and signalized this via IGMP/MLD reports +previously. + +This feature is intended for interface types which have a more reliable +and/or efficient way to deliver unicast packets than broadcast ones +(e.g. WiFi). + +However, it should only be enabled on interfaces where no IGMPv2/MLDv1 +report suppression takes place. IGMP/MLD report suppression issue is usually +overcome by the network daemon (supplicant) enabling AP isolation and +by that separating all STAs. + +Delivery of STA-to-STA IP multicast is made possible again by +enabling and utilizing the bridge hairpin mode, which considers the +incoming port as a potential outgoing port, too (see +.B hairpin +option). +Hairpin mode is performed after multicast snooping, therefore leading to +only deliver reports to STAs running a multicast router. + +.TP +.BR "neigh_suppress on " or " neigh_suppress off " +Controls whether neigh discovery (arp and nd) proxy and suppression is +enabled on the port. By default this flag is off. + +.TP +.BR "neigh_vlan_suppress on " or " neigh_vlan_suppress off " +Controls whether per-VLAN neigh discovery (arp and nd) proxy and suppression is +enabled on the port. When on, the \fBbridge link\fR option \fBneigh_suppress\fR +has no effect and the per-VLAN state is set using the \fBbridge vlan\fR option +\fBneigh_suppress\fR. By default this flag is off. + +.TP +.BR "vlan_tunnel on " or " vlan_tunnel off " +Controls whether vlan to tunnel mapping is enabled on the port. By +default this flag is off. + +.TP +.BR "isolated on " or " isolated off " +Controls whether a given port will be isolated, which means it will be +able to communicate with non-isolated ports only. By default this +flag is off. + +.TP +.BR "locked on " or " locked off " +Controls whether a port is locked or not. When locked, non-link-local frames +received through the port are dropped unless an FDB entry with the MAC source +address points to the port. The common use case is IEEE 802.1X where hosts can +authenticate themselves by exchanging EAPOL frames with an authenticator. After +authentication is complete, the user space control plane can install a matching +FDB entry to allow traffic from the host to be forwarded by the bridge. When +learning is enabled on a locked port, the +.B no_linklocal_learn +bridge option needs to be on to prevent the bridge from learning from received +EAPOL frames. By default this flag is off. + +.TP +.BR "mab on " or " mab off " +Controls whether MAC Authentication Bypass (MAB) is enabled on the port or not. +MAB can only be enabled on a locked port that has learning enabled. When +enabled, FDB entries are learned from received traffic and have the "locked" +FDB flag set. The flag can only be set by the kernel and it indicates that the +FDB entry cannot be used to authenticate the corresponding host. User space can +decide to authenticate the host by replacing the FDB entry and clearing the +"locked" FDB flag. Locked FDB entries can roam to unlocked (authorized) ports +in which case the "locked" flag is cleared. FDB entries cannot roam to locked +ports regardless of MAB being enabled or not. Therefore, locked FDB entries are +only created if an FDB entry with the given {MAC, VID} does not already exist. +This behavior prevents unauthenticated hosts from disrupting traffic destined +to already authenticated hosts. Locked FDB entries act like regular dynamic +entries with respect to forwarding and aging. By default this flag is off. + +.TP +.BI backup_port " DEVICE" +If the port loses carrier all traffic will be redirected to the +configured backup port + +.TP +.B nobackup_port +Removes the currently configured backup port + +.TP +.BI backup_nhid " NHID" +The FDB nexthop object ID (see \fBip-nexthop\fR(8)) to attach to packets being +redirected to a backup port that has VLAN tunnel mapping enabled (via the +\fBvlan_tunnel\fR option). Setting a value of 0 (default) has the effect of not +attaching any ID. + +.TP +.B self +link setting is configured on specified physical device + +.TP +.B master +link setting is configured on the software bridge (default) + +.TP +.BR "\-t" , " \-timestamp" +display current time when using monitor option. + +.SS bridge link show - list ports configuration for all bridges. + +This command displays ports configuration and flags for all bridges by default. + +.TP +.BI dev " DEV" +only display the specific bridge port named DEV. + +.TP +.BI master " DEVICE" +only display ports of the bridge named DEVICE. This is similar to +"ip link show master <bridge_device>" command. + +.SH bridge fdb - forwarding database management + +.B fdb +objects contain known Ethernet addresses on a link. + +.P +The corresponding commands display fdb entries, add new entries, +append entries, +and delete old ones. + +.SS bridge fdb add - add a new fdb entry + +This command creates a new fdb entry. + +.TP +.B LLADDR +the Ethernet MAC address. + +.TP +.BI dev " DEV" +the interface to which this address is associated. + +.B local +- is a local permanent fdb entry, which means that the bridge will not forward +frames with this destination MAC address and VLAN ID, but terminate them +locally. This flag is default unless "static" or "dynamic" are explicitly +specified. +.sp + +.B permanent +- this is a synonym for "local" +.sp + +.B static +- is a static (no arp) fdb entry +.sp + +.B dynamic +- is a dynamic reachable age-able fdb entry +.sp + +.B self +- the operation is fulfilled directly by the driver for the specified network +device. If the network device belongs to a master like a bridge, then the +bridge is bypassed and not notified of this operation (and if the device does +notify the bridge, it is driver-specific behavior and not mandated by this +flag, check the driver for more details). The "bridge fdb add" command can also +be used on the bridge device itself, and in this case, the added fdb entries +will be locally terminated (not forwarded). In the latter case, the "self" flag +is mandatory. The flag is set by default if "master" is not specified. +.sp + +.B master +- if the specified network device is a port that belongs to a master device +such as a bridge, the operation is fulfilled by the master device's driver, +which may in turn notify the port driver too of the address. If the specified +device is a master itself, such as a bridge, this flag is invalid. +.sp + +.B router +- the destination address is associated with a router. +Valid if the referenced device is a VXLAN type device and has +route short circuit enabled. +.sp + +.B use +- the address is in use. User space can use this option to +indicate to the kernel that the fdb entry is in use. +.sp + +.B extern_learn +- this entry was learned externally. This option can be used to +indicate to the kernel that an entry was hardware or user-space +controller learnt dynamic entry. Kernel will not age such an entry. +.sp + +.B sticky +- this entry will not change its port due to learning. +.sp + +.in -8 +The next command line parameters apply only +when the specified device +.I DEV +is of type VXLAN. +.TP +.BI dst " IPADDR" +the IP address of the destination +VXLAN tunnel endpoint where the Ethernet MAC ADDRESS resides. + +.TP +.BI src_vni " VNI" +the src VNI Network Identifier (or VXLAN Segment ID) +this entry belongs to. Used only when the vxlan device is in +external or collect metadata mode. If omitted the value specified at +vxlan device creation will be used. + +.TP +.BI vni " VNI" +the VXLAN VNI Network Identifier (or VXLAN Segment ID) +to use to connect to the remote VXLAN tunnel endpoint. +If omitted the value specified at vxlan device creation +will be used. + +.TP +.BI port " PORT" +the UDP destination PORT number to use to connect to the +remote VXLAN tunnel endpoint. +If omitted the default value is used. + +.TP +.BI via " DEVICE" +device name of the outgoing interface for the +VXLAN device driver to reach the +remote VXLAN tunnel endpoint. + +.TP +.BI nhid " NHID " +ecmp nexthop group for the VXLAN device driver +to reach remote VXLAN tunnel endpoints. + +.SS bridge fdb append - append a forwarding database entry +This command adds a new fdb entry with an already known +.IR LLADDR . +Valid only for multicast link layer addresses. +The command adds support for broadcast and multicast +Ethernet MAC addresses. +The Ethernet MAC address is added multiple times into +the forwarding database and the vxlan device driver +sends a copy of the data packet to each entry found. + +.PP +The arguments are the same as with +.BR "bridge fdb add" . + +.SS bridge fdb delete - delete a forwarding database entry +This command removes an existing fdb entry. + +.PP +The arguments are the same as with +.BR "bridge fdb add" . + +.SS bridge fdb replace - replace a forwarding database entry +If no matching entry is found, a new one will be created instead. + +.PP +The arguments are the same as with +.BR "bridge fdb add" . + +.SS bridge fdb show - list forwarding entries. + +This command displays the current forwarding table. + +.PP +With the +.B -statistics +option, the command becomes verbose. It prints out the last updated +and last used time for each entry. + +.SS bridge fdb get - get bridge forwarding entry. + +lookup a bridge forwarding table entry. + +.TP +.B LLADDR +the Ethernet MAC address. + +.TP +.BI dev " DEV" +the interface to which this address is associated. + +.TP +.BI brport " DEV" +the bridge port to which this address is associated. same as dev above. + +.TP +.BI br " DEV" +the bridge to which this address is associated. + +.TP +.B self +- the address is associated with the port drivers fdb. Usually hardware. + +.TP +.B master +- the address is associated with master devices fdb. Usually software (default). + +.SS bridge fdb flush - flush bridge forwarding table entries. + +flush the matching bridge forwarding table entries. Some options below have a negated +form when "no" is prepended to them (e.g. permanent and nopermanent). + +.TP +.BI dev " DEV" +the target device for the operation. If the device is a bridge port and "master" +is set then the operation will be fulfilled by its master device's driver and +all entries pointing to that port will be deleted. + +.TP +.BI brport " DEV" +the target bridge port for the operation. If the bridge device is specified then only +entries pointing to the bridge itself will be deleted. Note that the target device +specified by this option will override the one specified by dev above. + +.TP +.BI vlan " VID" +the target VLAN ID for the operation. Match forwarding table entries only with the +specified VLAN ID. + +.TP +.BI src_vni " VNI" +the src VNI Network Identifier (or VXLAN Segment ID) for the operation. Match +forwarding table entries only with the specified VNI. Valid if the referenced +device is a VXLAN type device. + +.TP +.BI nhid " NHID" +the ECMP nexthop group for the operation. Match forwarding table entries only +with the specified NHID. Valid if the referenced device is a VXLAN type device. + +.TP +.BI vni " VNI" +the VXLAN VNI Network Identifier (or VXLAN Segment ID) for the operation. Match +forwarding table entries only with the specified VNI. Valid if the referenced +device is a VXLAN type device. + +.TP +.BI port " PORT" +the UDP destination PORT number for the operation. Match forwarding table +entries only with the specified PORT. Valid if the referenced device is a VXLAN +type device. + +.TP +.BI dst " IPADDR" +the IP address of the destination VXLAN tunnel endpoint for the operation. Match +forwarding table entries only with the specified IPADDR. Valid if the referenced +device is a VXLAN type device. + +.TP +.B self +the operation is fulfilled directly by the driver for the specified network +device. If the network device belongs to a master like a bridge, then the +bridge is bypassed and not notified of this operation. The "bridge fdb flush" +command can also be used on the bridge device itself. The flag is set by default if +"master" is not specified. + +.TP +.B master +if the specified network device is a port that belongs to a master device +such as a bridge, the operation is fulfilled by the master device's driver. +Flush with both 'master' and 'self' is not recommended with attributes that are +not supported by all devices (e.g., vlan, vni). Such command will be handled by +bridge or VXLAN driver, but will return an error from the driver that does not +support the attribute. Instead, run flush twice - once with 'self' and once +with 'master', and each one with the supported attributes. + +.TP +.B [no]permanent +if specified then only permanent entries will be deleted or respectively if "no" +is prepended then only non-permanent entries will be deleted. + +.TP +.B [no]static +if specified then only static entries will be deleted or respectively if "no" +is prepended then only non-static entries will be deleted. + +.TP +.B [no]dynamic +if specified then only dynamic entries will be deleted or respectively if "no" +is prepended then only non-dynamic (static or permanent) entries will be deleted. + +.TP +.B [no]added_by_user +if specified then only entries with added_by_user flag will be deleted or respectively +if "no" is prepended then only entries without added_by_user flag will be deleted. + +.TP +.B [no]extern_learn +if specified then only entries with extern_learn flag will be deleted or respectively +if "no" is prepended then only entries without extern_learn flag will be deleted. + +.TP +.B [no]sticky +if specified then only entries with sticky flag will be deleted or respectively +if "no" is prepended then only entries without sticky flag will be deleted. + +.TP +.B [no]offloaded +if specified then only entries with offloaded flag will be deleted or respectively +if "no" is prepended then only entries without offloaded flag will be deleted. +.sp + +.TP +.B [no]router +if specified then only entries with router flag will be deleted or respectively +if "no" is prepended then only entries without router flag will be deleted. Valid +if the referenced device is a VXLAN type device. +.sp + +.SH bridge mdb - multicast group database management + +.B mdb +objects contain known IP or L2 multicast group addresses on a link. + +.P +The corresponding commands display mdb entries, add new entries, replace +entries and delete old ones. + +.SS bridge mdb add - add a new multicast group database entry + +This command creates a new mdb entry. + +.TP +.BI dev " DEV" +the interface where this group address is associated. + +.TP +.BI port " PORT" +the port whose link is known to have members of this multicast group. + +.TP +.BI grp " GROUP" +the multicast group address (IPv4, IPv6 or L2 multicast) whose members reside +on the link connected to the port. + +.B permanent +- the mdb entry is permanent. Optional for IPv4 and IPv6, mandatory for L2. +.sp + +.B temp +- the mdb entry is temporary (default) +.sp + +.TP +.BI src " SOURCE" +optional source IP address of a sender for this multicast group. If IGMPv3 for IPv4, or +MLDv2 for IPv6 respectively, are enabled it will be included in the lookup when +forwarding multicast traffic. + +.TP +.BI vid " VID" +the VLAN ID which is known to have members of this multicast group. + +.TP +.BR "filter_mode include " or " filter_mode exclude " +controls whether the sources in the entry's source list are in INCLUDE or +EXCLUDE mode. Can only be set for (*, G) entries. + +.TP +.BI source_list " SOURCE_LIST" +optional list of source IP addresses of senders for this multicast group, +separated by a ','. Whether the entry forwards packets from these senders or +not is determined by the entry's filter mode, which becomes a mandatory +argument. Can only be set for (*, G) entries. + +.TP +.BI proto " PROTO" +the routing protocol identifier of this mdb entry. Can be a number or a string +from the file /etc/iproute2/rt_protos. If the routing protocol is not given, +then +.B static +is assumed. + +.in -8 +The next command line parameters apply only +when the specified device +.I DEV +is of type VXLAN. + +.TP +.BI dst " IPADDR" +the IP address of the destination +VXLAN tunnel endpoint where the multicast receivers reside. + +.TP +.BI dst_port " DST_PORT" +the UDP destination port number to use to connect to the remote VXLAN tunnel +endpoint. If omitted, the value specified at VXLAN device creation will be +used. + +.TP +.BI vni " VNI" +the VXLAN VNI Network Identifier to use to connect to the remote VXLAN tunnel +endpoint. If omitted, the value specified at VXLAN device creation will be used +or the source VNI when the VXLAN device is in external mode. + +.TP +.BI src_vni " SRC_VNI" +the source VNI Network Identifier this entry belongs to. Used only when the +VXLAN device is in external mode. If omitted, the value specified at VXLAN +device creation will be used. + +.TP +.BI via " DEV" +device name of the outgoing interface for the VXLAN device to reach the remote +VXLAN tunnel endpoint. + +.in -8 +The 0.0.0.0 and :: MDB entries are special catchall entries used to flood IPv4 +and IPv6 unregistered multicast packets, respectively. Therefore, when these +entries are programmed, the catchall 00:00:00:00:00:00 FDB entry will only +flood broadcast, unknown unicast and link-local multicast. + +.in -8 +.SS bridge mdb delete - delete a multicast group database entry +This command removes an existing mdb entry. + +.PP +The arguments are the same as with +.BR "bridge mdb add" . + +.SS bridge mdb replace - replace a multicast group database entry +If no matching entry is found, a new one will be created instead. + +.PP +The arguments are the same as with +.BR "bridge mdb add" . + +.SS bridge mdb show - list multicast group database entries + +This command displays the current multicast group membership table. The table +is populated by IGMP and MLD snooping in the bridge driver automatically. It +can be altered by +.B bridge mdb add +and +.B bridge mdb del +commands manually too. + +.TP +.BI dev " DEV" +the interface only whose entries should be listed. Default is to list all +bridge interfaces. + +.PP +With the +.B -details +option, the command becomes verbose. It prints out the ports known to have +a connected router. + +.PP +With the +.B -statistics +option, the command displays timer values for mdb and router port entries. + +.SS bridge mdb get - get multicast group database entry. + +This command retrieves a multicast group database entry based on its key. + +.TP +.BI dev " DEV" +the interface where this group address is associated. + +.TP +.BI grp " GROUP" +the multicast group address (IPv4, IPv6 or L2 multicast). + +.TP +.BI src " SOURCE" +the source IP address. Only relevant when retrieving an (S, G) entry. + +.TP +.BI vid " VID" +the VLAN ID. Only relevant when the bridge is VLAN-aware. + +.TP +.BI src_vni " SRC_VNI" +the source VNI Network Identifier. Only relevant when the VXLAN device is in +external mode. + +.SH bridge vlan - VLAN filter list + +.B vlan +objects contain known VLAN IDs for a link. + +.P +The corresponding commands display vlan filter entries, add new entries, +and delete old ones. + +.SS bridge vlan add - add a new vlan filter entry + +This command creates a new vlan filter entry. + +.TP +.BI dev " NAME" +the interface with which this vlan is associated. + +.TP +.BI vid " VID" +the VLAN ID that identifies the vlan. + +.TP +.BI tunnel_info " TUNNEL_ID" +the TUNNEL ID that maps to this vlan. The tunnel id is set in +dst_metadata for every packet that belongs to this vlan (applicable to +bridge ports with vlan_tunnel flag set). + +.TP +.B pvid +the vlan specified is to be considered a PVID at ingress. +Any untagged frames will be assigned to this VLAN. + +.TP +.B untagged +the vlan specified is to be treated as untagged on egress. + +.TP +.B self +the vlan is configured on the specified physical device. Required if the +device is the bridge device. + +.TP +.B master +the vlan is configured on the software bridge (default). + +.SS bridge vlan delete - delete a vlan filter entry +This command removes an existing vlan filter entry. + +.PP +The arguments are the same as with +.BR "bridge vlan add". +The +.BR "pvid " and " untagged" +flags are ignored. + +.SS bridge vlan set - change vlan filter entry's options + +This command changes vlan filter entry's options. + +.TP +.BI dev " NAME" +the interface with which this vlan is associated. + +.TP +.BI vid " VID" +the VLAN ID that identifies the vlan. + +.TP +.BI state " STP_STATE " +the operation state of the vlan. One may enter STP state name (case insensitive), or one of the +numbers below. Negative inputs are ignored, and unrecognized names return an +error. Note that the state is set only for the vlan of the specified device, e.g. if it is +a bridge port then the state will be set only for the vlan of the port. + +.B 0 +- vlan is in STP +.B DISABLED +state. Make this vlan completely inactive for STP. This is also called +BPDU filter and could be used to disable STP on an untrusted vlan. +.sp + +.B 1 +- vlan is in STP +.B LISTENING +state. Only valid if STP is enabled on the bridge. In this +state the vlan listens for STP BPDUs and drops all other traffic frames. +.sp + +.B 2 +- vlan is in STP +.B LEARNING +state. Only valid if STP is enabled on the bridge. In this +state the vlan will accept traffic only for the purpose of updating MAC +address tables. +.sp + +.B 3 +- vlan is in STP +.B FORWARDING +state. This is the default vlan state. +.sp + +.B 4 +- vlan is in STP +.B BLOCKING +state. Only valid if STP is enabled on the bridge. This state +is used during the STP election process. In this state, the vlan will only process +STP BPDUs. +.sp + +.TP +.BI mcast_max_groups " MAX_GROUPS " +Sets the maximum number of MDB entries that can be registered for a given +VLAN on a given port. A VLAN-specific equivalent of the per-port option of +the same name, see above for details. + +Note that this option is only available when \fBip link\fR option +\fBmcast_vlan_snooping\fR is enabled. + +.TP +.BI mcast_router " MULTICAST_ROUTER " +configure this vlan and interface's multicast router mode, note that only modes +0 - 2 are available for bridge devices. +A vlan and interface with a multicast router will receive all multicast traffic. +.I MULTICAST_ROUTER +may be either +.sp +.B 0 +- to disable multicast router. +.sp + +.B 1 +- to let the system detect the presence of routers (default). +.sp + +.B 2 +- to permanently enable multicast traffic forwarding on this vlan and interface. +.sp + +.B 3 +- to temporarily mark this vlan and port as having a multicast router, i.e. +enable multicast traffic forwarding. This mode is available only for ports. +.sp + +.TP +.BR "neigh_suppress on " or " neigh_suppress off " +Controls whether neigh discovery (arp and nd) proxy and suppression is enabled +for a given VLAN on a given port. By default this flag is off. + +Note that this option only takes effect when \fBbridge link\fR option +\fBneigh_vlan_suppress\fR is enabled for a given port. + +.SS bridge vlan show - list vlan configuration. + +This command displays the current VLAN filter table. + +.PP +With the +.B -details +option, the command becomes verbose. It displays the per-vlan options. + +.PP +With the +.B -statistics +option, the command displays per-vlan traffic statistics. + +.SS bridge vlan tunnelshow - list vlan tunnel mapping. + +This command displays the current vlan tunnel info mapping. + +.SS bridge vlan global set - change vlan filter entry's global options + +This command changes vlan filter entry's global options. + +.TP +.BI dev " NAME" +the interface with which this vlan is associated. Only bridge devices are +supported for global options. + +.TP +.BI vid " VID" +the VLAN ID that identifies the vlan. + +.TP +.BI mcast_snooping " MULTICAST_SNOOPING " +turn multicast snooping for VLAN entry with VLAN ID on +.RI ( MULTICAST_SNOOPING " > 0) " +or off +.RI ( MULTICAST_SNOOPING " == 0). Default is on. " + +.TP +.BI mcast_querier " MULTICAST_QUERIER " +enable +.RI ( MULTICAST_QUERIER " > 0) " +or disable +.RI ( MULTICAST_QUERIER " == 0) " +IGMP/MLD querier, ie sending of multicast queries by the bridge. Default is disabled. + +.TP +.BI mcast_igmp_version " IGMP_VERSION " +set the IGMP version. Default is 2. + +.TP +.BI mcast_mld_version " MLD_VERSION " +set the MLD version. Default is 1. + +.TP +.BI mcast_last_member_count " LAST_MEMBER_COUNT " +set multicast last member count, ie the number of queries the bridge +will send before stopping forwarding a multicast group after a "leave" +message has been received. Default is 2. + +.TP +.BI mcast_last_member_interval " LAST_MEMBER_INTERVAL " +interval between queries to find remaining members of a group, +after a "leave" message is received. + +.TP +.BI mcast_startup_query_count " STARTUP_QUERY_COUNT " +set the number of queries to send during startup phase. Default is 2. + +.TP +.BI mcast_startup_query_interval " STARTUP_QUERY_INTERVAL " +interval between queries in the startup phase. + +.TP +.BI mcast_membership_interval " MEMBERSHIP_INTERVAL " +delay after which the bridge will leave a group, +if no membership reports for this group are received. + +.TP +.BI mcast_querier_interval " QUERIER_INTERVAL " +interval between queries sent by other routers. If no queries are seen +after this delay has passed, the bridge will start to send its own queries +(as if +.BI mcast_querier +was enabled). + +.TP +.BI mcast_query_interval " QUERY_INTERVAL " +interval between queries sent by the bridge after the end of the +startup phase. + +.TP +.BI mcast_query_response_interval " QUERY_RESPONSE_INTERVAL " +set the Max Response Time/Maximum Response Delay for IGMP/MLD +queries sent by the bridge. + +.SS bridge vlan global show - list global vlan options. + +This command displays the global VLAN options for each VLAN entry. + +.TP +.BI dev " DEV" +the interface only whose VLAN global options should be listed. Default is to list +all bridge interfaces. + +.TP +.BI vid " VID" +the VLAN ID only whose global options should be listed. Default is to list +all vlans. + +.SH bridge vni - VNI filter list + +.B vni +objects contain known VNI IDs for a dst metadata vxlan link. + +.P +The corresponding commands display vni filter entries, add new entries, +and delete old ones. + +.SS bridge vni add - add a new vni filter entry + +This command creates a new vni filter entry. + +.TP +.BI dev " NAME" +the interface with which this vni is associated. + +.TP +.BI vni " VNI" +the VNI ID that identifies the vni. + +.TP +.BI remote " IPADDR" +specifies the unicast destination IP address to use in outgoing packets +when the destination link layer address is not known in the VXLAN device +forwarding database. This parameter cannot be specified with the group. + +.TP +.BI group " IPADDR" +specifies the multicast IP address to join for this VNI + +.SS bridge vni del - delete a new vni filter entry + +This command removes an existing vni filter entry. + +.PP +The arguments are the same as with +.BR "bridge vni add". + +.SS bridge vni show - list vni filtering configuration. + +This command displays the current vni filter table. + +.PP +With the +.B -statistics +option, the command displays per-vni traffic statistics. + +.TP +.BI dev " NAME" +shows vni filtering table associated with the vxlan device + +.SH bridge monitor - state monitoring + +The +.B bridge +utility can monitor the state of devices and addresses +continuously. This option has a slightly different format. +Namely, the +.B monitor +command is the first in the command line and then the object list follows: + +.BR "bridge monitor" " [ " all " |" +.IR OBJECT-LIST " ]" + +.I OBJECT-LIST +is the list of object types that we want to monitor. +It may contain +.BR link ", " fdb ", " vlan " and " mdb "." +If no +.B file +argument is given, +.B bridge +opens RTNETLINK, listens on it and dumps state changes in the format +described in previous sections. + +.P +If a file name is given, it does not listen on RTNETLINK, +but opens the file containing RTNETLINK messages saved in binary format +and dumps them. + +.SH NOTES +This command uses facilities added in Linux 3.0. + +Although the forwarding table is maintained on a per-bridge device basis +the bridge device is not part of the syntax. This is a limitation of the +underlying netlink neighbour message protocol. When displaying the +forwarding table, entries for all bridges are displayed. +Add/delete/modify commands determine the underlying bridge device +based on the bridge to which the corresponding ethernet device is attached. + + +.SH SEE ALSO +.BR ip (8) +.SH BUGS +.RB "Please direct bugreports and patches to: " <netdev@vger.kernel.org> + +.SH AUTHOR +Original Manpage by Stephen Hemminger |