diff options
Diffstat (limited to 'upstream/archlinux/man8/tc-pedit.8')
| -rw-r--r-- | upstream/archlinux/man8/tc-pedit.8 | 402 |
1 files changed, 402 insertions, 0 deletions
diff --git a/upstream/archlinux/man8/tc-pedit.8 b/upstream/archlinux/man8/tc-pedit.8 new file mode 100644 index 00000000..2ea42929 --- /dev/null +++ b/upstream/archlinux/man8/tc-pedit.8 @@ -0,0 +1,402 @@ +.TH "Generic packet editor action in tc" 8 "12 Jan 2015" "iproute2" "Linux" + +.SH NAME +pedit - generic packet editor action +.SH SYNOPSIS +.in +8 +.ti -8 +.BR tc " ... " "action pedit [ex] munge " { +.IR RAW_OP " | " LAYERED_OP " | " EXTENDED_LAYERED_OP " } [ " CONTROL " ]" + +.ti -8 +.IR RAW_OP " := " +.BI offset " OFFSET" +.RB "{ " u8 " | " u16 " | " u32 " } [" +.IR AT_SPEC " ] " CMD_SPEC + +.ti -8 +.IR AT_SPEC " := " +.BI at " AT " offmask " MASK " shift " SHIFT" + +.ti -8 +.IR LAYERED_OP " := { " +.BI ip " IPHDR_FIELD" +| +.BI ip " BEYOND_IPHDR_FIELD" +.RI } " CMD_SPEC" + +.ti -8 +.IR EXTENDED_LAYERED_OP " := { " +.BI eth " ETHHDR_FIELD" +| +.BI ip " IPHDR_FIELD" +| +.BI ip " EX_IPHDR_FIELD" +| +.BI ip6 " IP6HDR_FIELD" +| +.BI tcp " TCPHDR_FIELD" +| +.BI udp " UDPHDR_FIELD" +.RI } " CMD_SPEC" + +.ti -8 +.IR ETHHDR_FIELD " := { " +.BR src " | " dst " | " type " }" + +.ti -8 +.IR IPHDR_FIELD " := { " +.BR src " | " dst " | " tos " | " dsfield " | " ihl " | " protocol " |" +.BR precedence " | " nofrag " | " firstfrag " | " ce " | " df " }" + +.ti -8 +.IR BEYOND_IPHDR_FIELD " := { " +.BR dport " | " sport " | " icmp_type " | " icmp_code " }" + +.ti -8 +.IR EX_IPHDR_FIELD " := { " +.BR ttl " }" + + +.ti -8 +.IR IP6HDR_FIELD " := { " +.BR src " | " dst " | " traffic_class " | " flow_lbl " | " payload_len " | " +.BR nexthdr " | " hoplimit " }" + +.ti -8 +.IR TCPHDR_FIELD " := { " +.BR sport " | " dport " | " flags " }" + +.ti -8 +.IR UDPHDR_FIELD " := { " +.BR sport " | " dport " }" + +.ti -8 +.IR CMD_SPEC " := {" +.BR clear " | " invert " | " set +.IR VAL " | " +.BR add +.IR VAL " | " +.BR decrement " | " +.BR preserve " } [ " retain +.IR RVAL " ]" + +.ti -8 +.IR CONTROL " := {" +.BR reclassify " | " pipe " | " drop " | " shot " | " continue " | " pass " | " goto " " chain " " CHAIN_INDEX " }" +.SH DESCRIPTION +The +.B pedit +action can be used to change arbitrary packet data. The location of data to +change can either be specified by giving an offset and size as in +.IR RAW_OP , +or for header values by naming the header and field to edit the size is then +chosen automatically based on the header field size. +.SH OPTIONS +.TP +.B ex +Use extended pedit. +.I EXTENDED_LAYERED_OP +and the add/decrement +.I CMD_SPEC +are allowed only in this mode. +.TP +.BI offset " OFFSET " "\fR{ \fBu32 \fR| \fBu16 \fR| \fBu8 \fR}" +Specify the offset at which to change data. +.I OFFSET +is a signed integer, it's base is automatically chosen (e.g. hex if prefixed by +.B 0x +or octal if prefixed by +.BR 0 ). +The second argument specifies the length of data to change, that is four bytes +.RB ( u32 ), +two bytes +.RB ( u16 ) +or a single byte +.RB ( u8 ). +.TP +.BI at " AT " offmask " MASK " shift " SHIFT" +This is an optional part of +.IR RAW_OP +which allows one to have a variable +.I OFFSET +depending on packet data at offset +.IR AT , +which is binary ANDed with +.I MASK +and right-shifted by +.I SHIFT +before adding it to +.IR OFFSET . +.TP +.BI eth " ETHHDR_FIELD" +Change an ETH header field. The supported keywords for +.I ETHHDR_FIELD +are: +.RS +.TP +.B src +.TQ +.B dst +Source or destination MAC address in the standard format: XX:XX:XX:XX:XX:XX +.TP +.B type +Ether-type in numeric value +.RE +.TP +.BI ip " IPHDR_FIELD" +Change an IPv4 header field. The supported keywords for +.I IPHDR_FIELD +are: +.RS +.TP +.B src +.TQ +.B dst +Source or destination IP address, a four-byte value. +.TP +.B tos +.TQ +.B dsfield +.TQ +.B precedence +Type Of Service field, an eight-bit value. +.TP +.B ihl +Change the IP Header Length field, a four-bit value. +.TP +.B protocol +Next-layer Protocol field, an eight-bit value. +.TP +.B nofrag +.TQ +.B firstfrag +.TQ +.B ce +.TQ +.B df +.TQ +.B mf +Change IP header flags. Note that the value to pass to the +.B set +command is not just a bit value, but the full byte including the flags field. +Though only the relevant bits of that value are respected, the rest ignored. +.RE +.TP +.BI ip " BEYOND_IPHDR_FIELD" +Supported only for non-extended layered op. It is passed to the kernel as +offsets relative to the beginning of the IP header and assumes the IP header is +of minimum size (20 bytes). The supported keywords for +.I BEYOND_IPHDR_FIELD +are: +.RS +.TP +.B dport +.TQ +.B sport +Destination or source port numbers, a 16-bit value. Indeed, IPv4 headers don't +contain this information. Instead, this will set an offset which suits at least +TCP and UDP if the IP header is of minimum size (20 bytes). If not, this will do +unexpected things. +.TP +.B icmp_type +.TQ +.B icmp_code +Again, this allows one to change data past the actual IP header itself. It assumes +an ICMP header is present immediately following the (minimal sized) IP header. +If it is not or the latter is bigger than the minimum of 20 bytes, this will do +unexpected things. These fields are eight-bit values. +.RE +.TP +.BI ip " EX_IPHDR_FIELD" +Supported only when +.I ex +is used. The supported keywords for +.I EX_IPHDR_FIELD +are: +.RS +.TP +.B ttl +.RE +.TP +.BI ip6 " IP6HDR_FIELD" +The supported keywords for +.I IP6HDR_FIELD +are: +.RS +.TP +.B src +.TQ +.B dst +.TQ +.B traffic_class +.TQ +.B flow_lbl +.TQ +.B payload_len +.TQ +.B nexthdr +.TQ +.B hoplimit +.RE +.TP +.BI tcp " TCPHDR_FIELD" +The supported keywords for +.I TCPHDR_FIELD +are: +.RS +.TP +.B sport +.TQ +.B dport +Source or destination TCP port number, a 16-bit value. +.TP +.B flags +.RE +.TP +.BI udp " UDPHDR_FIELD" +The supported keywords for +.I UDPHDR_FIELD +are: +.RS +.TP +.B sport +.TQ +.B dport +Source or destination TCP port number, a 16-bit value. +.RE +.TP +.B clear +Clear the addressed data (i.e., set it to zero). +.TP +.B invert +Swap every bit in the addressed data. +.TP +.BI set " VAL" +Set the addressed data to a specific value. The size of +.I VAL +is defined by either one of the +.BR u32 ", " u16 " or " u8 +keywords in +.IR RAW_OP , +or the size of the addressed header field in +.IR LAYERED_OP . +.TP +.BI add " VAL" +Add the addressed data by a specific value. The size of +.I VAL +is defined by the size of the addressed header field in +.IR EXTENDED_LAYERED_OP . +This operation is supported only for extended layered op. +.TP +.BI decrement +Decrease the addressed data by one. +This operation is supported only for +.BR ip " " ttl " and " ip6 " " hoplimit "." +.TP +.B preserve +Keep the addressed data as is. +.TP +.BI retain " RVAL" +This optional extra part of +.I CMD_SPEC +allows one to exclude bits from being changed. Supported only for 32 bits fields +or smaller. +.TP +.I CONTROL +The following keywords allow one to control how the tree of qdisc, classes, +filters and actions is further traversed after this action. +.RS +.TP +.B reclassify +Restart with the first filter in the current list. +.TP +.B pipe +Continue with the next action attached to the same filter. +.TP +.B drop +.TQ +.B shot +Drop the packet. +.TP +.B continue +Continue classification with the next filter in line. +.TP +.B pass +Finish classification process and return to calling qdisc for further packet +processing. This is the default. +.RE +.SH EXAMPLES +Being able to edit packet data, one could do all kinds of things, such as e.g. +implementing port redirection. Certainly not the most useful application, but +as an example it should do: + +First, qdiscs need to be set up to attach filters to. For the receive path, a simple +.B ingress +qdisc will do, for transmit path a classful qdisc +.RB ( HTB +in this case) is necessary: + +.RS +.EX +tc qdisc replace dev eth0 root handle 1: htb +tc qdisc add dev eth0 ingress handle ffff: +.EE +.RE + +Finally, a filter with +.B pedit +action can be added for each direction. In this case, +.B u32 +is used matching on the port number to redirect from, while +.B pedit +then does the actual rewriting: + +.RS +.EX +tc filter add dev eth0 parent 1: u32 \\ + match ip dport 23 0xffff \\ + action pedit pedit munge ip dport set 22 +tc filter add dev eth0 parent ffff: u32 \\ + match ip sport 22 0xffff \\ + action pedit pedit munge ip sport set 23 +tc filter add dev eth0 parent ffff: u32 \\ + match ip sport 22 0xffff \\ + action pedit ex munge ip dst set 192.168.1.199 +tc filter add dev eth0 parent ffff: u32 \\ + match ip sport 22 0xffff \\ + action pedit ex munge ip6 dst set fe80::dacb:8aff:fec7:320e +tc filter add dev eth0 parent ffff: u32 \\ + match ip sport 22 0xffff \\ + action pedit ex munge eth dst set 11:22:33:44:55:66 +tc filter add dev eth0 parent ffff: u32 \\ + match ip dport 23 0xffff \\ + action pedit ex munge tcp dport set 22 +.EE +.RE + +To rewrite just part of a field, use the +.B retain +directive. E.g. to overwrite the DSCP part of a dsfield with $DSCP, without +touching ECN: + +.RS +.EX +tc filter add dev eth0 ingress flower ... \\ + action pedit ex munge ip dsfield set $((DSCP << 2)) retain 0xfc +.EE +.RE + +And vice versa, to set ECN to e.g. 1 without impacting DSCP: + +.RS +.EX +tc filter add dev eth0 ingress flower ... \\ + action pedit ex munge ip dsfield set 1 retain 0x3 +.EE +.RE + +.SH SEE ALSO +.BR tc (8), +.BR tc-htb (8), +.BR tc-u32 (8) |