diff options
Diffstat (limited to 'upstream/fedora-40/man5/sane-hp.5')
| -rw-r--r-- | upstream/fedora-40/man5/sane-hp.5 | 304 |
1 files changed, 304 insertions, 0 deletions
diff --git a/upstream/fedora-40/man5/sane-hp.5 b/upstream/fedora-40/man5/sane-hp.5 new file mode 100644 index 00000000..e8f725d5 --- /dev/null +++ b/upstream/fedora-40/man5/sane-hp.5 @@ -0,0 +1,304 @@ +.TH sane\-hp 5 "13 Jul 2008" "" "SANE Scanner Access Now Easy" +.IX sane\-hp +.SH NAME +sane\-hp \- SANE backend for HP ScanJet scanners +.SH DESCRIPTION +The +.B sane\-hp +library implements a SANE (Scanner Access Now Easy) backend that +provides access to HP ScanJet scanners which support SCL (Scanner +Control Language by HP). The following +scanners are known positively to work with this backend: +.PP +.RS +.ft CR +.nf +Model: Product id: Interface: +---------- ----------- ---------- +ScanJet Plus C9195A HP Parallel Interface Card +ScanJet IIc C1750A 3226 SCSI +ScanJet IIcx C2500A 3332 SCSI +ScanJet IIp C1790A SCSI +ScanJet 3C C2520A 3503 SCSI +ScanJet 3P C2570A 3406 SCSI +ScanJet 4C C2520A SCSI +ScanJet 4P C1130A 3540 SCSI +ScanJet 4100C C6290A USB +ScanJet 5P C5110A SCSI +ScanJet 5100C C5190A parallel port +ScanJet 5200C C7190A 3846 parallel port/USB +ScanJet 6100C C2520A 3644 SCSI +ScanJet 6200C C6270A 3828 SCSI/USB +ScanJet 6250C C6270A 3828 SCSI/USB +ScanJet 6300C C7670A SCSI/USB +ScanJet 6350C C7670A SCSI/USB +ScanJet 6390C C7670A SCSI/USB +PhotoSmart C5100A R029,R030,R032 SCSI +.fi +.ft R +.RE +.PP +Support for models 5100C/5200C connected to the parallel port requires +the ppSCSI driver available at +.I http://cyberelk.net/tim/parport/ppscsi.html +and +.IR http://penguin-breeder.org/kernel/download/ . + +.PP +Support for models 5200C/62X0C/63X0C connected to the USB require +the kernel scanner driver or libusb. See +.BR sane\-usb (5) +for more details. +.PP +The +.B sane\-hp +backend no longer supports OfficeJet multi-function peripherals. +For these devices use the external "hpoj" backend in version 0.90 and later of +the "HP OfficeJet Linux driver", available at +.br +.IR http://hpoj.sourceforge.net +. +.PP +Because Hewlett-Packard does no longer produce scanners that support +SCL (beside the OfficeJets), the above list of supported scanners is +complete. +Other HP scanners are not supported by the +.B sane\-hp +backend, but might be supported by another one. See +.IR http://www.sane\-project.org/ . +You can also watch the sane\-devel mailing list at +.IR http://www.sane\-project.org/mailing\-lists.html . +.PP +More details about the hp backend can be found on its homepage +.IR http://www.kirchgessner.net/sane.html . +.PP +.SH "DEVICE NAMES" +This backend expects device names of the form: +.PP +.RS +.I special +.RE +.PP +Where +.I special +is the UNIX path-name for the special device that corresponds to the +scanner. For SCSI scanners the special device name must be a generic SCSI +device or a symlink to such a device. Under Linux, such a device name could be +.I /dev/sga +or +.IR /dev/sg2 , +for example. If the special device name contains "usb", "uscanner" or "ugen", +it is assumed that the scanner is connected by USB. +For the HP ScanJet Plus the special device name must be the device +that corresponds to the parallel interface card that was shipped with the +scanner. That is +.IR /dev/hpscan . +A special driver is required for this card. +See +.I ftp://rvs.ctrl\-c.liu.se/pub/wingel/hpscan +for details. If the link +does not work, try +.IR ftp://sunsite.unc.edu/pub/Linux/kernel/patches/scanners . +.SH CONFIGURATION +The contents of the +.I hp.conf +file is a list of options and device names that correspond to HP ScanJet +scanners. Empty lines and lines starting with a hash mark +(#) are ignored. See +.BR sane\-scsi (5) +and +.BR sane\-usb (5) +on details of what constitutes a valid device name. +.PP +Options specified in front of the first line that contains a device name +are defaults for all devices. Options specified below a line that +contains a device name apply just to the most recently mentioned device. +.PP +Supported options are +.BR connect\-scsi , +.BR connect\-device , +.BR enable\-image\-buffering , +and +.BR dumb\-read . + +Option +.B connect\-scsi +specifies that the scanner is connected to the system by SCSI. +Input/output is performed using SCSI-commands. This is the default. +But if your SCSI device name contains "usb", "uscanner" or "ugen", +option connect\-scsi must be specified. Otherwise it is assumed that +the scanner is connected by USB. + +Option +.B connect\-device +specifies that the scanner is connected to the system by a special +device. Input/output is performed by +.BR read ()/ write "()-operations" +on the device. This option must be used for HP ScanJet Plus +or scanners connected to USB which are accessed through a named device +(e.g. +.IR /dev/usb/scanner0 ). +For device names that contain "usb", "uscanner" or "ugen", it is not +necessary to specify option connect\-device. + +Option +.B enable\-image\-buffering +stores the scanned image in memory before passing it to the frontend. Could be +used in case of forward/backward moving scanner lamp. + +Option +.B dumb\-read +can be used to work around problems with "Error during device I/O". These +problems may occur with certain SCSI-to-USB converters or Buslogic SCSI cards. +The option should not be used for SCSI devices which are working correctly. +Otherwise startup of frontends and changing parameters might be slower. +.PP +A sample configuration file is shown below: +.PP +.RS +.ft CR +.nf +/dev/scanner +# this is a comment +/dev/hpscan +option connect\-device +.fi +.ft R +.RE +.PP +.I /dev/scanner +is typically a symlink to the actual SCSI scanner device. +.RE +.SH FILES +.TP +.I /etc/sane.d/hp.conf +The backend configuration file (see also description of +.B SANE_CONFIG_DIR +below). +.TP +.I /usr/lib64/sane/libsane\-hp.a +The static library implementing this backend. +.TP +.I /usr/lib64/sane/libsane\-hp.so +The shared library implementing this backend (present on systems that +support dynamic loading). +.TP +.I $HOME/.sane/calib-hp:<device>.dat +Calibration data for HP PhotoSmart PhotoScanner that is retrieved from the +scanner after calibration. The data is uploaded to the scanner at start +of the backend if it is in media mode 'print media' or if the media mode is +changed to 'print media'. +.SH ENVIRONMENT +.TP +.B SANE_CONFIG_DIR +This environment variable specifies the list of directories that may +contain the configuration file. On *NIX systems, the directories are +separated by a colon (`:'), under OS/2, they are separated by a +semi-colon (`;'). If this variable is not set, the configuration file +is searched in two default directories: first, the current working +directory +.RI ( "." ) +and then in +.IR /etc/sane.d . +If the value of the +environment variable ends with the directory separator character, then +the default directories are searched after the explicitly specified +directories. For example, setting +.B SANE_CONFIG_DIR +to "/tmp/config:" would result in directories +.IR "tmp/config" , +.IR "." , +and +.I "/etc/sane.d" +being searched (in this order). +.TP +.B SANE_DEBUG_HP +If the library was compiled with debug support enabled, this +environment variable controls the debug level for this backend. E.g., +a value of 128 requests all debug output to be printed. Smaller +levels reduce verbosity. +.TP +.B SANE_HOME_HP +Only used for OS/2 and along with use of HP PhotoSmart PhotoScanner. +Must be set to the directory where the directory .sane is located. +Is used to save and read the calibration file. +.TP +.B SANE_HP_KEEPOPEN_SCSI +.TP +.B SANE_HP_KEEPOPEN_USB +.TP +.B SANE_HP_KEEPOPEN_DEVICE +For each type of connection (connect\-scsi, connect\-usb, connect\-device) +it can be specified if the connection to the device should be kept open ("1") +or not ("0"). +Usually the connections are closed after an operation is performed. +Keeping connection open to SCSI-devices can result in errors during device IO +when the scanner has not been used for some time. By default, USB-connections +are kept open. Other connections are closed. +.TP +.B SANE_HP_RDREDO +Specifies number of retries for read operation before returning an EOF error. +Only supported for non-SCSI devices. Default: 1 retry. Time between retries +is 0.1 seconds. + +.SH BUGS +.TP +.B HP PhotoSmart PhotoScanner +In media mode 'slide' and 'negative', scan resolutions are rounded to +multiple of 300 dpi. The scanner does not scale the data correctly +on other resolutions. Some newer models (firmware code R030 and later) +do not support adjustment of contrast/intensity level and tone map. +The backend will simulate this by software, but only for gray +and 24 bit color. +.TP +.B Automatic Document Feeder (ADF) +For use of the ADF with +.BR xscanimage (1), +first place paper in the ADF and +then change option scan source to 'ADF'. Press 'change document' +to load a sheet. Then press 'scan' to start a scan. +Maybe it is sufficient to press 'scan' without 'change document' +for repeated scans. The use of the preview window is not recommended +when working with the ADF. +Setting a window to scan from ADF is not supported with +.BR xscanimage (1). +Try +.BR xsane (1). +.TP +.B Immediate actions +Some actions in +.BR xscanimage (1) +(i.e. unload, select media, calibrate) +have an immediate effect on the scanner without starting a scan. +These options can not be used with +.BR scanimage (1). + +.SH TODO +.TP +.B HP PhotoSmart PhotoScanner +PhotoScanners with firmware release R030 and up have +no firmware support for contrast/brightness/gamma table. In the current +backend this is simulated by software on 24 bits data. +Simulation on 30 bits should give better results. +.TP +.B Data widths greater than 8 bits +Custom gamma table does not work. +.TP +.B Parallel scanner support +Beside the ScanJet Plus which came with its own parallel interface card, +currently only the HP ScanJet 5100C/5200C are supported. +These scanners are using an internal parallel-to-SCSI converter which +is supported by the ppSCSI-driver (see above). + +.SH "SEE ALSO" +.BR sane (7), +.BR sane\-scsi (5), +.BR sane\-usb (5) +.BR scanimage (1), +.BR xscanimage (1), +.BR scanimage (1) + +.SH AUTHOR +The sane\-hp backend was written by Geoffrey T. Dairiki. +.br +HP PhotoSmart PhotoScanner support by Peter Kirchgessner. |