diff options
Diffstat (limited to 'upstream/mageia-cauldron/man1/xmodmap.1')
| -rw-r--r-- | upstream/mageia-cauldron/man1/xmodmap.1 | 339 |
1 files changed, 339 insertions, 0 deletions
diff --git a/upstream/mageia-cauldron/man1/xmodmap.1 b/upstream/mageia-cauldron/man1/xmodmap.1 new file mode 100644 index 00000000..c3b7443d --- /dev/null +++ b/upstream/mageia-cauldron/man1/xmodmap.1 @@ -0,0 +1,339 @@ +.\" Copyright (c) 1987, 2010, Oracle and/or its affiliates. All rights reserved. +.\" +.\" Permission is hereby granted, free of charge, to any person obtaining a +.\" copy of this software and associated documentation files (the "Software"), +.\" to deal in the Software without restriction, including without limitation +.\" the rights to use, copy, modify, merge, publish, distribute, sublicense, +.\" and/or sell copies of the Software, and to permit persons to whom the +.\" Software is furnished to do so, subject to the following conditions: +.\" +.\" The above copyright notice and this permission notice (including the next +.\" paragraph) shall be included in all copies or substantial portions of the +.\" Software. +.\" +.\" THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +.\" IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +.\" FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +.\" THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +.\" LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING +.\" FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER +.\" DEALINGS IN THE SOFTWARE. +.\" +.\" Copyright 1988, 1989, 1990, 1998 The Open Group +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and its +.\" documentation for any purpose is hereby granted without fee, provided that +.\" the above copyright notice appear in all copies and that both that +.\" copyright notice and this permission notice appear in supporting +.\" documentation. +.\" +.\" The above copyright notice and this permission notice shall be included +.\" in all copies or substantial portions of the Software. +.\" +.\" THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS +.\" OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +.\" MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. +.\" IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR +.\" OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, +.\" ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR +.\" OTHER DEALINGS IN THE SOFTWARE. +.\" +.\" Except as contained in this notice, the name of The Open Group shall +.\" not be used in advertising or otherwise to promote the sale, use or +.\" other dealings in this Software without prior written authorization +.\" from The Open Group. +.\" +.de EX \"Begin example +.ne 5 +.if n .sp 1 +.if t .sp .5 +.nf +.in +.5i +.. +.de EE +.fi +.in -.5i +.if n .sp 1 +.if t .sp .5 +.. +.TH XMODMAP 1 "xmodmap 1.0.11" "X Version 11" +.SH NAME +xmodmap - utility for modifying keymaps and pointer button mappings in X +.SH SYNOPSIS +.B xmodmap +[-options ...] [filename] +.SH DESCRIPTION +.PP +The \fIxmodmap\fP program is used to edit and display the +keyboard \fImodifier map\fP and \fIkeymap table\fP that are used by client +applications to convert event keycodes into keysyms. It is usually run from +the user's session startup script to configure the keyboard according to +personal tastes. +.SH OPTIONS +.PP +The following options may be used with \fIxmodmap\fP: +.TP 8 +.B \-display \fIdisplay\fP +This option specifies the host and display to use. +.TP 8 +.B \-help +This option indicates that a brief description of the command line arguments +should be printed on the standard error channel. This will be done whenever an +unhandled argument is given to +.I xmodmap. +.TP 8 +.B \-grammar +This option indicates that a help message describing the expression grammar +used in files and with \-e expressions should be printed on the standard error. +.TP 8 +.B \-version +This option indicates that +.I xmodmap +should print its version information and exit. +.TP 8 +.B \-verbose +This option indicates that +.I xmodmap +should print logging information as it parses its input. +.TP 8 +.B \-quiet +This option turns off the verbose logging. This is the default. +.TP 8 +.B \-n +This option indicates that +.I xmodmap +should not change the mappings, but should display what it would do, like +\fImake(1)\fP does when given this option. +.TP 8 +.B \-e \fIexpression\fB +This option specifies an expression to be executed. Any number of expressions +may be specified from the command line. +.TP 8 +.B \-pm +This option indicates that the current modifier map should be printed on the +standard output. This is the default mode of operation if no other mode +options are specified. +.TP 8 +.B \-pk +This option indicates that the current keymap table should be printed on the +standard output. +.TP 8 +.B \-pke +This option indicates that the current keymap table should be printed on the +standard output in the form of expressions that can be fed back to +\fIxmodmap\fP. +.TP 8 +.B \-pp +This option indicates that the current pointer map should be printed on the +standard output. +.TP 8 +.B \- +A lone dash means that the standard input should be used as the input file. +.PP +The \fIfilename\fP specifies a file containing \fIxmodmap\fP expressions +to be executed. This file is usually kept in the user's home directory with +a name like \fI.xmodmaprc\fP. +.SH EXPRESSION GRAMMAR +.PP +The +.I xmodmap +program reads a list of expressions and parses them all before attempting +to execute any of them. This makes it possible to refer to keysyms that are +being redefined in a natural way without having to worry as much about name +conflicts. +.PP +The list of keysym names may be found in the header file +\fI<X11/keysymdef.h>\fP (without the \fIXK_\fP prefix). +Keysyms matching Unicode characters may be specified as "U0020" to "U007E" +and "U00A0" to "U10FFFF" for all possible Unicode characters. +.TP 8 +.B keycode \fINUMBER\fP = \fIKEYSYMNAME ...\fP +The list of keysyms is assigned to the indicated keycode +(which may be specified in decimal, hex or octal and can be determined by +running the +.I xev +program). Up to eight keysyms may be attached to a key, however the last four +are not used in any major X server implementation. The first keysym is used +when no modifier key is pressed in conjunction with this key, the second with +Shift, the third when the Mode_switch key is used with this key and the fourth +when both the Mode_switch and Shift keys are used. +.TP 8 +.B keycode any = \fIKEYSYMNAME ...\fP +If no existing key has the specified list of keysyms assigned to it, +a spare key on the keyboard is selected and the keysyms are assigned to it. +The list of keysyms may be specified in decimal, hex or octal. +.TP 8 +.B keysym \fIKEYSYMNAME\fP = \fIKEYSYMNAME ...\fP +The \fIKEYSYMNAME\fP on the left hand side is translated into matching keycodes +used to perform the corresponding set of \fBkeycode\fP expressions. Note that +if the same keysym is bound to multiple keys, the expression is executed +for each matching keycode. +.TP 8 +.B clear \fIMODIFIERNAME\fP +This removes all entries in the modifier map for the given modifier, where +valid name are: +.BR Shift , +.BR Lock , +.BR Control , +.BR Mod1 , +.BR Mod2 , +.BR Mod3 , +.BR Mod4 , +and \fBMod5\fP (case +does not matter in modifier names, although it does matter for all other +names). For example, ``clear Lock'' will remove +all any keys that were bound to the shift lock modifier. +.TP 8 +.B add \fIMODIFIERNAME\fP = \fIKEYSYMNAME ...\fP +This adds all keys containing the given keysyms to the indicated modifier map. +The keysym names +are evaluated after all input expressions are read to make it easy to write +expressions to swap keys (see the EXAMPLES section). +.TP 8 +.B remove \fIMODIFIERNAME\fP = \fIKEYSYMNAME ...\fP +This removes all keys containing the given keysyms from the indicated +modifier map. Unlike +.B add, +the keysym names are evaluated as the line is read in. This allows you to +remove keys from a modifier without having to worry about whether or not they +have been reassigned. +.TP 8 +.B "pointer = default" +This sets the pointer map back to its default settings (button 1 generates a +code of 1, button 2 generates a 2, etc.). +.TP 8 +.B pointer = \fINUMBER ...\fP +This sets the pointer map to contain the indicated button codes. The list +always starts with the first physical button. Setting a button code to 0 +disables events from that button. +.PP +Lines that begin with an exclamation point (!) are taken as comments. +.PP +If you want to change the binding of a modifier key, you must also remove it +from the appropriate modifier map. +.SH EXAMPLES +.PP +Many pointers are designed such that the first button is pressed using the +index finger of the right hand. People who are left-handed frequently find +that it is more comfortable to reverse the button codes that get generated +so that the primary button is pressed using the index finger of the left hand. +This could be done on a 3 button pointer as follows: +.EX +% xmodmap -e "pointer = 3 2 1" +.EE +.PP +Many applications support the notion of Meta keys (similar to Control +keys except that Meta is held down instead of Control). However, +some servers do not have a Meta keysym in the default keymap table, so one +needs to be added by hand. +The following command will attach Meta to the Multi-language key (sometimes +labeled Compose Character). It also takes advantage of the fact that +applications that need a Meta key simply need to get the keycode and don't +require the keysym to be in the first column of the keymap table. This +means that applications that are looking for a Multi_key (including the +default modifier map) won't notice any change. +.EX +% xmodmap -e "keysym Multi_key = Multi_key Meta_L" +.EE +.PP +Similarly, some keyboards have an Alt key but no Meta key. +In that case the following may be useful: +.EX +% xmodmap -e "keysym Alt_L = Meta_L Alt_L" +.EE +.PP +One of the more simple, yet convenient, uses of \fIxmodmap\fP is to set the +keyboard's "rubout" key to generate an alternate keysym. This frequently +involves exchanging Backspace with Delete to be more comfortable to the user. +If the \fIttyModes\fP resource in \fIxterm\fP is set as well, all terminal +emulator windows will use the same key for erasing characters: +.EX +% xmodmap -e "keysym BackSpace = Delete" +% echo "XTerm*ttyModes: erase ^?" | xrdb -merge +.EE +.PP +Some keyboards do not automatically generate less than and greater than +characters when the comma and period keys are shifted. This can be remedied +with \fIxmodmap\fP by resetting the bindings for the comma and period with +the following scripts: +.EX +! +! make shift-, be < and shift-. be > +! +keysym comma = comma less +keysym period = period greater +.EE +.PP +One of the more irritating differences between keyboards is the location of the +Control and CapsLock keys. A common use of \fIxmodmap\fP is to swap these +two keys as follows: +.EX +! +! Swap Caps_Lock and Control_L +! +remove Lock = Caps_Lock +remove Control = Control_L +keysym Control_L = Caps_Lock +keysym Caps_Lock = Control_L +add Lock = Caps_Lock +add Control = Control_L +.EE +.PP +This example can be run again to swap the keys back to their previous +assignments. +.PP +The \fIkeycode\fP command is useful for assigning the same keysym to +multiple keycodes. Although unportable, it also makes it possible to write +scripts that can reset the keyboard to a known state. The following script +sets the backspace key to generate Delete (as shown above), flushes all +existing caps lock bindings, makes the CapsLock +key be a control key, make F5 generate Escape, and makes Break/Reset be a +shift lock. +.EX +! +! On the HP, the following keycodes have key caps as listed: +! +! 101 Backspace +! 55 Caps +! 14 Ctrl +! 15 Break/Reset +! 86 Stop +! 89 F5 +! +keycode 101 = Delete +keycode 55 = Control_R +clear Lock +add Control = Control_R +keycode 89 = Escape +keycode 15 = Caps_Lock +add Lock = Caps_Lock +.EE +.SH ENVIRONMENT +.PP +.TP 8 +.B DISPLAY +to get default host and display number. +.SH SEE ALSO +X(7), xev(1), setxkbmap(1), +XStringToKeysym(3), +\fIXlib\fP documentation on key and pointer events +.SH BUGS +.PP +Every time a \fBkeycode\fP expression is evaluated, the server generates +a \fIMappingNotify\fP event on every client. This can cause some thrashing. +All of the changes should be batched together and done at once. +Clients that receive keyboard input and ignore \fIMappingNotify\fP events +will not notice any changes made to keyboard mappings. +.PP +.I Xmodmap +should generate "add" and "remove" expressions automatically +whenever a keycode that is already bound to a modifier is changed. +.PP +There should be a way to have the +.I remove +expression accept keycodes as well as keysyms for those times when you really +mess up your mappings. +.SH AUTHOR +Jim Fulton, MIT X Consortium, rewritten from an earlier version by +David Rosenthal of Sun Microsystems. + |