diff options
Diffstat (limited to 'upstream/mageia-cauldron/man5/sane-teco3.5')
| -rw-r--r-- | upstream/mageia-cauldron/man5/sane-teco3.5 | 168 |
1 files changed, 168 insertions, 0 deletions
diff --git a/upstream/mageia-cauldron/man5/sane-teco3.5 b/upstream/mageia-cauldron/man5/sane-teco3.5 new file mode 100644 index 00000000..44264b4a --- /dev/null +++ b/upstream/mageia-cauldron/man5/sane-teco3.5 @@ -0,0 +1,168 @@ +.TH sane\-teco3 5 "14 Jul 2008" "" "SANE Scanner Access Now Easy" +.IX sane\-teco3 +.SH NAME +sane\-teco3 \- SANE backend for TECO / RELISYS scanners +.SH DESCRIPTION +The +.B sane\-teco3 +library implements a SANE (Scanner Access Now Easy) backend that +provides access to some TECO SCSI flatbed scanners. This backend +should be considered +.B alpha-quality +software! TECO scanners are sold under +various brands like RELYSIS, PIOTECH, TRUST. This backend may or +may not support yours. +.PP +The scanners that should work with this backend are: +.PP +.RS +.ft CR +.nf + Vendor Model TECO model status + --------------------------- ---------- ---------- + Relisys Scorpio VM3552 tested + Plustek OpticPro 2400SP VM3552 untested + PIOTECH Splendeur 3024 VM3552 tested + Trust Imagery 2400 SP VM3552 tested + Trust Imagery 4800 SP+ VM3552 tested + Trust Imagery 9600 SP VM3552 untested +.fi +.ft R +.RE + +The TECO VM number can usually be found at the back of the +scanner. It is also part of the FCC ID. + +The options the backend supports can either be selected through +command line options to programs like +.BR scanimage (1) +or through GUI +elements in +.BR xscanimage (1) +or +.BR xsane (1). + +.br +If you have any success with a scanner not listed here, or if you notice +any strange behavior, please report to the backend maintainer or to +the SANE mailing list. + +.SH OPTIONS +Valid command line options and their syntax can be listed by using: + +.RS +scanimage \-\-help \-d teco3 +.RE + +.TP +.B Scan Mode + +.TP +.B \-\-mode Black & White|Grayscale|Color +Selects the basic mode of operation of the scanner. +The +.I Black & White +mode is black and white only (1 bit). +.I Grayscale +will produce 256 levels of gray (8 bits). +.I Color +will produce a 24-bit color image. + +.TP +.B \-\-resolution 1..1200 +Selects the resolution for a scan. The scanner can do all resolutions +between 1 and 1200, in increments of 1. + +.TP +.B \-\-preview +Requests a preview scan. The resolution used for that scan is 22 dpi +and the scan area is the maximum allowed. The scan mode is user +selected. The default is "no". + +.TP +.B Geometry options + +.TP +.B \-l \-t \-x \-y +Control the scan area: +.B \-l +sets the top left x coordinate, +.B \-t +the top left y coordinate, +.B \-x +selects the width and +.B \-y +the height of the scan area. +All parameters are specified in millimeters by default. + +.SH OPTIONS FOR COLOR MODE ONLY + +.TP +.B \-\-custom\-gamma +Allows the user to specify a gamma table (see the +next 3 parameters). + +.TP +.B \-\-red\-gamma\-table +Can be used to download a user defined +gamma table for the red channel. The table must be 1024 bytes long. + +.TP +.B \-\-green\-gamma\-table +Can be used to download a user defined +gamma table for the green channel. The table must be 1024 bytes long. + +.TP +.B \-\-blue\-gamma\-table +Can be used to download a user defined gamma table +for the blue channel. The table must be 1024 bytes long. + + +.SH CONFIGURATION FILE +The configuration file +.I /etc/sane.d/teco3.conf +supports only one item: the device name to use (eg +.IR /dev/scanner ). + + +.SH FILES +.TP +.I /usr/lib64/sane/libsane\-teco3.a +The static library implementing this backend. +.TP +.I /usr/lib64/sane/libsane\-teco3.so +The shared library implementing this backend (present on systems that +support dynamic loading). + + +.SH ENVIRONMENT +.TP +.B SANE_DEBUG_TECO3 +If the library was compiled with debug support enabled, this +environment variable controls the debug level for this backend. E.g., +a value of 128 requests all debug output to be printed. Smaller levels +reduce verbosity. + + +.SH LIMITATIONS +The windows TWAIN driver has many more options than this SANE +backend. However they are only software adjustments. This backend only +implements what the scanner can support. + + +.SH BUGS +Not much. + + +.SH "SEE ALSO" +.BR sane\-scsi (5), +.BR scanimage (1), +.BR xscanimage (1), +.BR xsane (1), +.BR sane (7) + + +.SH AUTHOR +.TP +The package is actively maintained by Frank Zago. +.I http://www.zago.net/sane/#teco3 |