diff options
Diffstat (limited to '')
| -rw-r--r-- | upstream/opensuse-tumbleweed/man1/mpstat.1 | 241 |
1 files changed, 241 insertions, 0 deletions
diff --git a/upstream/opensuse-tumbleweed/man1/mpstat.1 b/upstream/opensuse-tumbleweed/man1/mpstat.1 new file mode 100644 index 00000000..08e45a5a --- /dev/null +++ b/upstream/opensuse-tumbleweed/man1/mpstat.1 @@ -0,0 +1,241 @@ +.\" mpstat manual page - (C) 2000-2020 Sebastien Godard (sysstat <at> orange.fr) +.TH MPSTAT 1 "AUGUST 2020" Linux "Linux User's Manual" -*- nroff -*- +.SH NAME +mpstat \- Report processors related statistics. + +.SH SYNOPSIS +.B mpstat [ -A ] [ --dec={ 0 | 1 | 2 } ] [ -n ] [ -u ] [ -T ] [ -V ] [ -I { +.IB "keyword" "[,...] | ALL } ] [ -N { " "node_list " "| ALL } ] [ -o JSON ] [ -P {" +.IB "cpu_list " "| ALL } ] [ " "interval " "[ " "count " "] ]" + +.SH DESCRIPTION +.RB "The " "mpstat" +command writes to standard output activities for each available processor, +processor 0 being the first one. +Global average activities among all processors are also reported. +.RB "The " "mpstat" +command can be used on both SMP and UP machines, but in the latter, only global +average activities will be printed. If no activity has been selected, then the +default report is the CPU utilization report. +.PP +.RI "The " "interval" +parameter specifies the amount of time in seconds between each report. +A value of 0 (or no parameters at all) indicates that processors statistics are +to be reported for the time since system startup (boot). The +.IR "count " "parameter can be specified in conjunction with the " "interval" +parameter if this one is not set to zero. The value of +.I count +determines the number of reports generated at +.IR "interval " "seconds apart. If the " "interval" +parameter is specified without the +.IR "count " "parameter, the" +.B mpstat +command generates reports continuously. + +.SH OPTIONS +.TP +.B -A +This option is equivalent to specifying +.BR "-n -u -I ALL" "." +This option also implies specifying +.B "-N ALL -P ALL" +unless these options are explicitly set on the command line. +.TP +.B --dec={ 0 | 1 | 2 } +Specify the number of decimal places to use (0 to 2, default value is 2). +.TP +.BI "-I { " "keyword" "[,...] | ALL }" +Report interrupts statistics. +.RI "Possible " "keywords " "are" +.BR "CPU" ", " "SCPU" ", and " "SUM" "." +.PP +.RS +.RB "With the " "CPU" +keyword, the number of each individual interrupt received per +second by the CPU or CPUs is displayed. Interrupts are those listed in +.IR "/proc/interrupts " "file." +.PP +.RB "With the " "SCPU" +keyword, the number of each individual software interrupt received per +second by the CPU or CPUs is displayed. This option works only +with kernels 2.6.31 and later. Software interrupts are those listed in +.IR "/proc/softirqs " "file." +.PP +.RB "With the " "SUM " "keyword, the " "mpstat" +command reports the total number of interrupts per processor. +The following values are displayed: + +.IP CPU +Processor number. The keyword +.B all +indicates that statistics are calculated as averages among all processors. + +.IP intr/s +Show the total number of interrupts received per second by +the CPU or CPUs. +.RE +.IP +.RB "The " "ALL" +keyword is equivalent to specifying all the keywords above and +therefore all the interrupts statistics are displayed. +.TP +.BI "-N { " "node_list " "| ALL }" +Indicate the NUMA nodes for which statistics are to be reported. +.I node_list +is a list of comma-separated values or range of values (e.g., +.BR "0,2,4-7,12-" "). Note that node " "all" +is the global average among all nodes. The +.B ALL +keyword indicates that statistics are to be reported for all nodes. +.TP +.B -n +Report summary CPU statistics based on NUMA node placement. The following +values are displayed: +.RS +.IP NODE +Logical NUMA node number. The keyword +.B all +indicates that statistics are calculated as averages among all nodes. +.RE +.IP +All the other fields are the same as those displayed with option +.BR "-u " "(see below)." +.TP +.B -o JSON +Display the statistics in JSON (JavaScript Object Notation) format. +JSON output field order is undefined, and new fields may be added +in the future. +.TP +.BI "-P { " "cpu_list " "| ALL }" +Indicate the processors for which statistics are to be reported. +.I cpu_list +is a list of comma-separated values or range of values (e.g., +.BR "0,2,4-7,12-" ")." +Note that processor 0 is the first processor, and processor +.B all +is the global average among all processors. +.RB "The " "ALL" +keyword indicates that statistics are to be reported for all processors. +Offline processors are not displayed. +.TP +.B -T +Display topology elements in the CPU report (see option +.B -u +below). The following elements are displayed: +.RS +.IP CORE +Logical core number. +.IP SOCK +Logical socket number. +.IP NODE +Logical NUMA node number. +.RE +.TP +.B -u +Report CPU utilization. The following values are displayed: +.RS +.IP CPU +Processor number. The keyword +.I all +indicates that statistics are calculated as averages among all processors. +.IP %usr +Show the percentage of CPU utilization that occurred while +executing at the user level (application). +.IP %nice +Show the percentage of CPU utilization that occurred while +executing at the user level with nice priority. +.IP %sys +Show the percentage of CPU utilization that occurred while +executing at the system level (kernel). Note that this does not +include time spent servicing hardware and software interrupts. +.IP %iowait +Show the percentage of time that the CPU or CPUs were idle during which +the system had an outstanding disk I/O request. +.IP %irq +Show the percentage of time spent by the CPU or CPUs to service hardware interrupts. +.IP %soft +Show the percentage of time spent by the CPU or CPUs to service software interrupts. +.IP %steal +Show the percentage of time spent in involuntary wait by the virtual CPU +or CPUs while the hypervisor was servicing another virtual processor. +.IP %guest +Show the percentage of time spent by the CPU or CPUs to run a virtual processor. +.IP %gnice +Show the percentage of time spent by the CPU or CPUs to run a niced guest. +.IP %idle +Show the percentage of time that the CPU or CPUs were idle and the system +did not have an outstanding disk I/O request. +.RE +.TP +.B -V +Print version number then exit. + +.SH ENVIRONMENT +.RB "The " "mpstat" +command takes into account the following environment variable: +.TP +.B S_COLORS +By default statistics are displayed in color when the output is connected to a terminal. +Use this variable to change the settings. Possible values for this variable are +.IR "never" ", " "always " "or " "auto" +(the latter is equivalent to the default settings). +.br +Please note that the color (being red, yellow, or some other color) used to display a value +is not indicative of any kind of issue simply because of the color. It only indicates different +ranges of values. +.TP +.B S_COLORS_SGR +Specify the colors and other attributes used to display statistics on the terminal. +Its value is a colon-separated list of capabilities that defaults to +.BR "H=31;1:I=32;22:M=35;1:N=34;1:Z=34;22" "." +Supported capabilities are: +.RS +.TP +.B H= +SGR (Select Graphic Rendition) substring for percentage values greater than or equal to 75%. +.TP +.B I= +SGR substring for CPU number. +.TP +.B M= +SGR substring for percentage values in the range from 50% to 75%. +.TP +.B N= +SGR substring for non-zero statistics values. +.TP +.B Z= +SGR substring for zero values. +.RE +.TP +.B S_TIME_FORMAT +If this variable exists and its value is +.BR ISO +then the current locale will be ignored when printing the date in the report header. +.RB "The " "mpstat" +command will use the ISO 8601 format (YYYY-MM-DD) instead. +The timestamp will also be compliant with ISO 8601 format. + +.SH EXAMPLES +.TP +.B mpstat 2 5 +Display five reports of global statistics among all processors at two second intervals. +.TP +.B mpstat -P ALL 2 5 +Display five reports of statistics for all processors at two second intervals. + +.SH BUGS +.IR "/proc " "filesystem must be mounted for the" +.BR "mpstat " "command to work." + +.SH FILES +.IR "/proc " "contains various files with system statistics." + +.SH AUTHOR +Sebastien Godard (sysstat <at> orange.fr) + +.SH SEE ALSO +.BR "sar" "(1), " "pidstat" "(1), " "iostat" "(1), " "vmstat" "(8)" +.PP +.I https://github.com/sysstat/sysstat +.br +.I http://pagesperso-orange.fr/sebastien.godard/ |