From fc22b3d6507c6745911b9dfcc68f1e665ae13dbc Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 15 Apr 2024 21:43:11 +0200 Subject: Adding upstream version 4.22.0. Signed-off-by: Daniel Baumann --- upstream/fedora-40/man5/sane-artec_eplus48u.5 | 162 ++++++++++++++++++++++++++ 1 file changed, 162 insertions(+) create mode 100644 upstream/fedora-40/man5/sane-artec_eplus48u.5 (limited to 'upstream/fedora-40/man5/sane-artec_eplus48u.5') diff --git a/upstream/fedora-40/man5/sane-artec_eplus48u.5 b/upstream/fedora-40/man5/sane-artec_eplus48u.5 new file mode 100644 index 00000000..7df45067 --- /dev/null +++ b/upstream/fedora-40/man5/sane-artec_eplus48u.5 @@ -0,0 +1,162 @@ +.TH sane\-artec_eplus48u 5 "11 Jul 2008" "" "SANE" +.SH NAME +sane\-artec_eplus48u \- SANE backend for the scanner Artec E+ 48U and re-badged models +.SH DESCRIPTION +The +.B sane\-artec_eplus48u +library implements a SANE (Scanner Access Now Easy) backend that provides +access to several USB flatbed scanners using the GT6816 chipset like the Artec E+ 48U. +These scanners have a contact image sensor (CIS). +.PP +A complete list of supported devices can be found on +.IR http://www.sane\-project.org/sane\-supported\-devices.html . +.PP +This is ALPHA software. Especially if you test new or untested scanners, keep +your hand at the scanner's plug and unplug it, if the head bumps at the end of +the scan area. +.PP +If you own a scanner other than the ones mentioned on the list that works with this +backend, please let us know this by sending the scanner's exact model name and +the USB vendor and product ids (e.g. from +.IR /proc/bus/usb/devices , +.BR sane\-find\-scanner (1) +or syslog) to me. Even if the scanner's name is only +slightly different from the models mentioned above, please let me know. +.PP +.SH KERNEL ISSUES +If libusb-0.1.6 or later is installed, this section can be skipped. The +scanner should be found by +.BR sane\-find\-scanner (1) +without further actions. For setting permissions and general USB information +look at +.BR sane\-usb (5). +.PP +When you are using the scanner module, a Linux kernel 2.4.12 or newer is +required. + +.SH FIRMWARE FILE +You need a firmware file for your scanner. That's a small file containing +software that will be uploaded to the scanner's memory. For the scanners +mentioned above, it's usually named +.I Artec48.usb +or +.IR 1200.usb . +You can find it on the installation CD that was provided by the manufacturer, +normally in the directory Win98, WinMe or similar. +If the Windows-driver is installed on your computer, then you can also +find the firmware file under +.IR c:\\windows\\system32\\drivers . + +.SH CONFIGURATION +The contents of the +.I artec_eplus48u.conf +file is a list of usb lines containing vendor and product ids that correspond +to USB scanners. The file can also contain option lines. Empty lines and +lines starting with a hash mark (#) are ignored. The scanners are +autodetected by +.I usb vendor_id product_id +statements which are already included into +.I artec_eplus48u.conf . +"vendor_id" and "product_id" are hexadecimal numbers that identify the scanner. +.PP +Every usb section can have additional options. +.TP +.B artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb +The path to the firmware file. This option is required. +.TP +.B redGamma 1.0 +.TP +.B greenGamma 1.0 +.TP +.B blueGamma 1.0 +.TP +.B masterGamma 1.9 +These are the default gamma values. If you set the "Defaults" option with a frontend, +then the gamma options are reset to the values specified here. +.TP +.B redOffset 0x28 +.TP +.B greenOffset 0x2f +.TP +.B blueOffset 0x2f +.TP +.B redExposure 0xa7 +.TP +.B greenExposure 0x116 +.TP +.B blueExposure 0xdc +These are the default values for offset and exposure time. +You can change them (e.g. to speed up calibration) +if you don't want to save the calibration data permanently. +.TP +.B vendorString "Artec" +.TP +.B modelString "E+ 48U" +By default, the scanner is reported as "Artec E+ 48U". If you don't like this, e.g. +because you have an Tevion MD 9693, then change the options accordingly. +.SH FILES +.TP +.I /usr/local/etc/sane.d/artec_eplus48u.conf +The backend configuration file (see also description of +.B SANE_CONFIG_DIR +below). +.TP +.I /usr/local/lib/sane/libsane\-artec_eplus48u.a +The static library implementing this backend. +.TP +.I /usr/local/lib/sane/libsane\-artec_eplus48u.so +The shared library implementing this backend (present on systems that +support dynamic loading). +.SH ENVIRONMENT +.TP +.B SANE_CONFIG_DIR +This environment variable specifies the list of directories that may +contain the configuration file. On *NIX systems, the directories are +separated by a colon (`:'), under OS/2, they are separated by a +semi-colon (`;'). If this variable is not set, the configuration file +is searched in two default directories: first, the current working +directory (".") and then in +.IR /etc/sane.d . +If the value of the environment variable ends with the directory +separator character, then the default directories are searched after +the explicitly specified directories. For example, setting +.B SANE_CONFIG_DIR +to "/tmp/config:" would result in directories +.IR tmp/config , +.IR . , +and +.I /etc/sane.d +being searched (in this order). +.TP +.B SANE_DEBUG_ARTEC_EPLUS48U +If the library was compiled with debug support enabled, this +environment variable controls the debug level for this backend. Higher +debug levels increase the verbosity of the output. + +Example: +export SANE_DEBUG_ARTEC_EPLUS48U=3 + +.SH "SEE ALSO" +.BR sane (7), +.BR sane\-usb (5) + +.SH AUTHOR +Michael Herder. +.br +This backend is based on the gt68xx test-program written by Sergey Vlasov, Andreas Nowack, and +David Stevenson. Thanks to everyone who tested the backend or reported bugs. +.br +This man page is based on man +.BR sane\-gt68xx (5), +written by Henning Meier-Geinitz. + +.SH BUGS +This backend has been tested on Linux only. If you are using it on a different platform, please +contact us. +.PP +Interpolation with 1200 dpi is weak. +.PP +Support for buttons is missing due to missing support in SANE. +.PP +Please contact us if you find a bug: +.IR http://www.sane\-project.org/bugs.html . -- cgit v1.2.3