From fc22b3d6507c6745911b9dfcc68f1e665ae13dbc Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 15 Apr 2024 21:43:11 +0200 Subject: Adding upstream version 4.22.0. Signed-off-by: Daniel Baumann --- upstream/fedora-rawhide/man1/bc.1 | 825 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 825 insertions(+) create mode 100644 upstream/fedora-rawhide/man1/bc.1 (limited to 'upstream/fedora-rawhide/man1/bc.1') diff --git a/upstream/fedora-rawhide/man1/bc.1 b/upstream/fedora-rawhide/man1/bc.1 new file mode 100644 index 00000000..7ff6a2d7 --- /dev/null +++ b/upstream/fedora-rawhide/man1/bc.1 @@ -0,0 +1,825 @@ +.\" +.\" bc.1 - the *roff document processor source for the bc manual +.\" +.\" This file is part of GNU bc. +.\" Copyright (C) 1991-1994, 1997, 2000, 2003, 2006, 2017 Free Software Foundation, Inc. +.\" +.\" This program is free software; you can redistribute it and/or modify +.\" it under the terms of the GNU General Public License as published by +.\" the Free Software Foundation; either version 2 of the License , or +.\" (at your option) any later version. +.\" +.\" This program is distributed in the hope that it will be useful, +.\" but WITHOUT ANY WARRANTY; without even the implied warranty of +.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +.\" GNU General Public License for more details. +.\" +.\" You should have received a copy of the GNU General Public License +.\" along with this program; see the file COPYING. If not, write to: +.\" The Free Software Foundation, Inc. +.\" 51 Franklin Street, Fifth Floor +.\" Boston, MA 02110-1301 USA +.\" +.\" You may contact the author by: +.\" e-mail: philnelson@acm.org +.\" us-mail: Philip A. Nelson +.\" Computer Science Department, 9062 +.\" Western Washington University +.\" Bellingham, WA 98226-9062 +.\" +.\" +.TH bc 1 "2006-06-11" "GNU Project" +.SH NAME +bc - An arbitrary precision calculator language +.SH SYNTAX +\fBbc\fR [ \fB-hlwsqv\fR ] [long-options] [ \fI file ...\fR ] +.SH DESCRIPTION +\fBbc\fR is a language that supports arbitrary precision numbers +with interactive execution of statements. There are some similarities +in the syntax to the C programming language. +A standard math library is available by command line option. +If requested, the math library is defined before processing any files. +\fBbc\fR starts by processing code from all the files listed +on the command line in the order listed. After all files have been +processed, \fBbc\fR reads from the standard input. All code is +executed as it is read. (If a file contains a command to halt the +processor, \fBbc\fR will never read from the standard input.) +.PP +This version of \fBbc\fR contains several extensions beyond +traditional \fBbc\fR implementations and the POSIX draft standard. +Command line options can cause these extensions to print a warning +or to be rejected. This +document describes the language accepted by this processor. +Extensions will be identified as such. +.SS OPTIONS +.IP "-h, --help" +Print the usage and exit. +.IP "-i, --interactive" +Force interactive mode. +.IP "-l, --mathlib" +Define the standard math library. +.IP "-w, --warn" +Give warnings for extensions to POSIX \fBbc\fR. +.IP "-s, --standard" +Process exactly the POSIX \fBbc\fR language. +.IP "-q, --quiet" +Do not print the normal GNU bc welcome. +.IP "-v, --version" +Print the version number and copyright and quit. +.SS NUMBERS +The most basic element in \fBbc\fR is the number. Numbers are +arbitrary precision numbers. This precision is both in the integer +part and the fractional part. All numbers are represented internally +in decimal and all computation is done in decimal. (This version +truncates results from divide and multiply operations.) There are two +attributes of numbers, the length and the scale. The length is the +total number of decimal digits used by \fBbc\fR to represent a number +and the scale is the total number of decimal digits after the decimal +point. For example: +.nf +.RS + .000001 has a length of 6 and scale of 6. + 1935.000 has a length of 7 and a scale of 3. +.RE +.fi +.SS VARIABLES +Numbers are stored in two types of variables, simple variables and +arrays. Both simple variables and array variables are named. Names +begin with a letter followed by any number of letters, digits and +underscores. All letters must be lower case. (Full alpha-numeric +names are an extension. In POSIX \fBbc\fR all names are a single +lower case letter.) The type of variable is clear by the context +because all array variable names will be followed by brackets ([]). +.PP +There are four special variables, \fBscale, ibase, obase,\fR and +\fBlast\fR. \fBscale\fR defines how some operations use digits after the +decimal point. The default value of \fBscale\fR is 0. \fBibase\fR +and \fBobase\fR define the conversion base for input and output +numbers. The default for both input and output is base 10. +\fBlast\fR (an extension) is a variable that has the value of the last +printed number. These will be discussed in further detail where +appropriate. All of these variables may have values assigned to them +as well as used in expressions. +.SS COMMENTS +Comments in \fBbc\fR start with the characters \fB/*\fR and end with +the characters \fB*/\fR. Comments may start anywhere and appear as a +single space in the input. (This causes comments to delimit other +input items. For example, a comment can not be found in the middle of +a variable name.) Comments include any newlines (end of line) between +the start and the end of the comment. +.PP +To support the use of scripts for \fBbc\fR, a single line comment has been +added as an extension. A single line comment starts at a \fB#\fR +character and continues to the next end of the line. The end of line +character is not part of the comment and is processed normally. +.SS EXPRESSIONS +The numbers are manipulated by expressions and statements. Since +the language was designed to be interactive, statements and expressions +are executed as soon as possible. There is no "main" program. Instead, +code is executed as it is encountered. (Functions, discussed in +detail later, are defined when encountered.) +.PP +A simple expression is just a constant. \fBbc\fR converts constants +into internal decimal numbers using the current input base, specified +by the variable \fBibase\fR. (There is an exception in functions.) +The legal values of \fBibase\fR are 2 through 36. (Bases greater than +16 are an extension.) Assigning a value outside this range to +\fBibase\fR will result in a value of 2 or 36. Input numbers may +contain the characters 0-9 and A-Z. (Note: They must be capitals. +Lower case letters are variable names.) Single digit numbers always +have the value of the digit regardless of the value of +\fBibase\fR. (i.e. A = 10.) For multi-digit numbers, \fBbc\fR changes +all input digits greater or equal to ibase to the value of +\fBibase\fR-1. This makes the number \fBZZZ\fR always be the largest +3 digit number of the input base. +.PP +Full expressions are similar to many other high level languages. +Since there is only one kind of number, there are no rules for mixing +types. Instead, there are rules on the scale of expressions. Every +expression has a scale. This is derived from the scale of original +numbers, the operation performed and in many cases, the value of the +variable \fBscale\fR. Legal values of the variable \fBscale\fR are +0 to the maximum number representable by a C integer. +.PP +In the following descriptions of legal expressions, "expr" refers to a +complete expression and "var" refers to a simple or an array variable. +A simple variable is just a +.RS +\fIname\fR +.RE +and an array variable is specified as +.RS +\fIname\fR[\fIexpr\fR] +.RE +Unless specifically +mentioned the scale of the result is the maximum scale of the +expressions involved. +.IP "- expr" +The result is the negation of the expression. +.IP "++ var" +The variable is incremented by one and the new value is the result of +the expression. +.IP "-- var" +The variable +is decremented by one and the new value is the result of the +expression. +.IP "var ++" + The result of the expression is the value of +the variable and then the variable is incremented by one. +.IP "var --" +The result of the expression is the value of the variable and then +the variable is decremented by one. +.IP "expr + expr" +The result of the expression is the sum of the two expressions. +.IP "expr - expr" +The result of the expression is the difference of the two expressions. +.IP "expr * expr" +The result of the expression is the product of the two expressions. +If a and b are the scales of the two expressions, then the scale of the result is: +min(a+b,max(scale,a,b)) +.IP "expr / expr" +The result of the expression is the quotient of the two expressions. +The scale of the result is the value of the variable \fBscale\fR. +.IP "expr % expr" +The result of the expression is the "remainder" and it is computed in the +following way. To compute a%b, first a/b is computed to \fBscale\fR +digits. That result is used to compute a-(a/b)*b to the scale of the +maximum of \fBscale\fR+scale(b) and scale(a). If \fBscale\fR is set +to zero and both expressions are integers this expression is the +integer remainder function. +.IP "expr ^ expr" +The result of the expression is the value of the first raised to the +second. The second expression must be an integer. (If the second +expression is not an integer, a warning is generated and the +expression is truncated to get an integer value.) The scale of the +result is \fBscale\fR if the exponent is negative. If the exponent +is positive the scale of the result is the minimum of the scale of the +first expression times the value of the exponent and the maximum of +\fBscale\fR and the scale of the first expression. (e.g. scale(a^b) += min(scale(a)*b, max( \fBscale,\fR scale(a))).) It should be noted +that expr^0 will always return the value of 1. +.IP "( expr )" +This alters the standard precedence to force the evaluation of the +expression. +.IP "var = expr" +The variable is assigned the value of the expression. +.IP "var = expr" +This is equivalent to "var = var expr" with the exception that +the "var" part is evaluated only once. This can make a difference if +"var" is an array. +.PP +Relational expressions are a special kind of expression +that always evaluate to 0 or 1, 0 if the relation is false and 1 if +the relation is true. These may appear in any legal expression. +(POSIX bc requires that relational expressions are used only in if, +while, and for statements and that only one relational test may be +done in them.) The relational operators are +.IP "expr1 < expr2" +The result is 1 if expr1 is strictly less than expr2. +.IP "expr1 <= expr2" +The result is 1 if expr1 is less than or equal to expr2. +.IP "expr1 > expr2" +The result is 1 if expr1 is strictly greater than expr2. +.IP "expr1 >= expr2" +The result is 1 if expr1 is greater than or equal to expr2. +.IP "expr1 == expr2" +The result is 1 if expr1 is equal to expr2. +.IP "expr1 != expr2" +The result is 1 if expr1 is not equal to expr2. +.PP +Boolean operations are also legal. (POSIX \fBbc\fR does NOT have +boolean operations). The result of all boolean operations are 0 and 1 +(for false and true) as in relational expressions. The boolean +operators are: +.IP "!expr" +The result is 1 if expr is 0. +.IP "expr && expr" +The result is 1 if both expressions are non-zero. +.IP "expr || expr" +The result is 1 if either expression is non-zero. +.PP +The expression precedence is as follows: (lowest to highest) +.nf +.RS +|| operator, left associative +&& operator, left associative +! operator, nonassociative +Relational operators, left associative +Assignment operator, right associative ++ and - operators, left associative +*, / and % operators, left associative +^ operator, right associative +unary - operator, nonassociative +++ and -- operators, nonassociative +.RE +.fi +.PP +This precedence was chosen so that POSIX compliant \fBbc\fR programs +will run correctly. This will cause the use of the relational and +logical operators to have some unusual behavior when used with +assignment expressions. Consider the expression: +.RS +a = 3 < 5 +.RE +.PP +Most C programmers would assume this would assign the result of "3 < +5" (the value 1) to the variable "a". What this does in \fBbc\fR is +assign the value 3 to the variable "a" and then compare 3 to 5. It is +best to use parenthesis when using relational and logical operators +with the assignment operators. +.PP +There are a few more special expressions that are provided in \fBbc\fR. +These have to do with user defined functions and standard +functions. They all appear as "\fIname\fB(\fIparameters\fB)\fR". +See the section on functions for user defined functions. The standard +functions are: +.IP "length ( expression )" +The value of the length function is the number of significant digits in the +expression. +.IP "read ( )" +The read function (an extension) will read a number from the standard +input, regardless of where the function occurs. Beware, this can +cause problems with the mixing of data and program in the standard input. +The best use for this function is in a previously written program that +needs input from the user, but never allows program code to be input +from the user. The value of the read function is the number read from +the standard input using the current value of the variable +\fBibase\fR for the conversion base. +.IP "scale ( expression )" +The value of the scale function is the number of digits after the decimal +point in the expression. +.IP "sqrt ( expression )" +The value of the sqrt function is the square root of the expression. If +the expression is negative, a run time error is generated. +.SS STATEMENTS +Statements (as in most algebraic languages) provide the sequencing of +expression evaluation. In \fBbc\fR statements are executed "as soon +as possible." Execution happens when a newline in encountered and +there is one or more complete statements. Due to this immediate +execution, newlines are very important in \fBbc\fR. In fact, both a +semicolon and a newline are used as statement separators. An +improperly placed newline will cause a syntax error. Because newlines +are statement separators, it is possible to hide a newline by using +the backslash character. The sequence "\e", where is the +newline appears to \fBbc\fR as whitespace instead of a newline. A +statement list is a series of statements separated by semicolons and +newlines. The following is a list of \fBbc\fR statements and what +they do: (Things enclosed in brackets ([]) are optional parts of the +statement.) +.IP "expression" +This statement does one of two things. If the expression starts with +" ...", it is considered to be an assignment +statement. If the expression is not an assignment statement, the +expression is evaluated and printed to the output. After the number +is printed, a newline is printed. For example, "a=1" is an assignment +statement and "(a=1)" is an expression that has an embedded +assignment. All numbers that are printed are printed in the base +specified by the variable \fBobase\fR. The legal values for \fB +obase\fR are 2 through BC_BASE_MAX. (See the section LIMITS.) For +bases 2 through 16, the usual method of writing numbers is used. For +bases greater than 16, \fBbc\fR uses a multi-character digit method +of printing the numbers where each higher base digit is printed as a +base 10 number. The multi-character digits are separated by spaces. +Each digit contains the number of characters required to represent the +base ten value of "obase-1". Since numbers are of arbitrary +precision, some numbers may not be printable on a single output line. +These long numbers will be split across lines using the "\e" as the +last character on a line. The maximum number of characters printed +per line is 70. Due to the interactive nature of \fBbc\fR, printing +a number causes the side effect of assigning the printed value to the +special variable \fBlast\fR. This allows the user to recover the +last value printed without having to retype the expression that +printed the number. Assigning to \fBlast\fR is legal and will +overwrite the last printed value with the assigned value. The newly +assigned value will remain until the next number is printed or another +value is assigned to \fBlast\fR. (Some installations may allow the +use of a single period (.) which is not part of a number as a short +hand notation for for \fBlast\fR.) +.IP "string" +The string is printed to the output. Strings start with a double quote +character and contain all characters until the next double quote character. +All characters are take literally, including any newline. No newline +character is printed after the string. +.IP "\fBprint\fR list" +The print statement (an extension) provides another method of output. +The "list" is a list of strings and expressions separated by commas. +Each string or expression is printed in the order of the list. No +terminating newline is printed. Expressions are evaluated and their +value is printed and assigned to the variable \fBlast\fR. Strings +in the print statement are printed to the output and may contain +special characters. Special characters start with the backslash +character (\e). The special characters recognized by \fBbc\fR are +"a" (alert or bell), "b" (backspace), "f" (form feed), "n" (newline), +"r" (carriage return), "q" (double quote), "t" (tab), and "\e" (backslash). +Any other character following the backslash will be ignored. +.IP "{ statement_list }" +This is the compound statement. It allows multiple statements to be +grouped together for execution. +.IP "\fBif\fR ( expression ) statement1 [\fBelse\fR statement2]" +The if statement evaluates the expression and executes statement1 or +statement2 depending on the value of the expression. If the expression +is non-zero, statement1 is executed. If statement2 is present and +the value of the expression is 0, then statement2 is executed. (The +else clause is an extension.) +.IP "\fBwhile\fR ( expression ) statement" +The while statement will execute the statement while the expression +is non-zero. It evaluates the expression before each execution of +the statement. Termination of the loop is caused by a zero +expression value or the execution of a break statement. +.IP "\fBfor\fR ( [expression1] ; [expression2] ; [expression3] ) statement" +The for statement controls repeated execution of the statement. +Expression1 is evaluated before the loop. Expression2 is evaluated +before each execution of the statement. If it is non-zero, the statement +is evaluated. If it is zero, the loop is terminated. After each +execution of the statement, expression3 is evaluated before the reevaluation +of expression2. If expression1 or expression3 are missing, nothing is +evaluated at the point they would be evaluated. +If expression2 is missing, it is the same as substituting +the value 1 for expression2. (The optional expressions are an +extension. POSIX \fBbc\fR requires all three expressions.) +The following is equivalent code for the for statement: +.nf +.RS +expression1; +while (expression2) { + statement; + expression3; +} +.RE +.fi +.IP "\fBbreak\fR" +This statement causes a forced exit of the most recent enclosing while +statement or for statement. +.IP "\fBcontinue\fR" +The continue statement (an extension) causes the most recent enclosing +for statement to start the next iteration. +.IP "\fBhalt\fR" +The halt statement (an extension) is an executed statement that causes +the \fBbc\fR processor to quit only when it is executed. For example, +"if (0 == 1) halt" will not cause \fBbc\fR to terminate because the halt is +not executed. +.IP "\fBreturn\fR" +Return the value 0 from a function. (See the section on functions.) +.IP "\fBreturn\fR ( expression )" +Return the value of the expression from a function. (See the section on +functions.) As an extension, the parenthesis are not required. +.SS PSEUDO STATEMENTS +These statements are not statements in the traditional sense. They are +not executed statements. Their function is performed at "compile" time. +.IP "\fBlimits\fR" +Print the local limits enforced by the local version of \fBbc\fR. This +is an extension. +.IP "\fBquit\fR" +When the quit statement is read, the \fBbc\fR processor +is terminated, regardless of where the quit statement is found. For +example, "if (0 == 1) quit" will cause \fBbc\fR to terminate. +.IP "\fBwarranty\fR" +Print a longer warranty notice. This is an extension. +.SS FUNCTIONS +Functions provide a method of defining a computation that can be executed +later. Functions in +.B bc +always compute a value and return it to the caller. Function definitions +are "dynamic" in the sense that a function is undefined until a definition +is encountered in the input. That definition is then used until another +definition function for the same name is encountered. The new definition +then replaces the older definition. A function is defined as follows: +.nf +.RS +\fBdefine \fIname \fB( \fIparameters \fB) { \fInewline +\fI auto_list statement_list \fB}\fR +.RE +.fi +A function call is just an expression of the form +"\fIname\fB(\fIparameters\fB)\fR". +.PP +Parameters are numbers or arrays (an extension). In the function definition, +zero or more parameters are defined by listing their names separated by +commas. All parameters are call by value parameters. +Arrays are specified in the parameter definition by +the notation "\fIname\fB[]\fR". In the function call, actual parameters +are full expressions for number parameters. The same notation is used +for passing arrays as for defining array parameters. The named array is +passed by value to the function. Since function definitions are dynamic, +parameter numbers and types are checked when a function is called. Any +mismatch in number or types of parameters will cause a runtime error. +A runtime error will also occur for the call to an undefined function. +.PP +The \fIauto_list\fR is an optional list of variables that are for +"local" use. The syntax of the auto list (if present) is "\fBauto +\fIname\fR, ... ;". (The semicolon is optional.) Each \fIname\fR is +the name of an auto variable. Arrays may be specified by using the +same notation as used in parameters. These variables have their +values pushed onto a stack at the start of the function. The +variables are then initialized to zero and used throughout the +execution of the function. At function exit, these variables are +popped so that the original value (at the time of the function call) +of these variables are restored. The parameters are really auto +variables that are initialized to a value provided in the function +call. Auto variables are different than traditional local variables +because if function A calls function B, B may access function +A's auto variables by just using the same name, unless function B has +called them auto variables. Due to the fact that auto variables and +parameters are pushed onto a stack, \fBbc\fR supports recursive functions. +.PP +The function body is a list of \fBbc\fR statements. Again, statements +are separated by semicolons or newlines. Return statements cause the +termination of a function and the return of a value. There are two +versions of the return statement. The first form, "\fBreturn\fR", returns +the value 0 to the calling expression. The second form, +"\fBreturn ( \fIexpression \fB)\fR", computes the value of the expression +and returns that value to the calling expression. There is an implied +"\fBreturn (0)\fR" at the end of every function. This allows a function +to terminate and return 0 without an explicit return statement. +.PP +Functions also change the usage of the variable \fBibase\fR. All +constants in the function body will be converted using the value of +\fBibase\fR at the time of the function call. Changes of \fBibase\fR +will be ignored during the execution of the function except for the +standard function \fBread\fR, which will always use the current value +of \fBibase\fR for conversion of numbers. +.PP +Several extensions have been added to functions. First, the format of +the definition has been slightly relaxed. The standard requires the +opening brace be on the same line as the \fBdefine\fR keyword and all +other parts must be on following lines. This version of \fBbc\fR will +allow any number of newlines before and after the opening brace of the +function. For example, the following definitions are legal. +.nf +.RS +\f(CW +define d (n) { return (2*n); } +define d (n) + { return (2*n); } +\fR +.RE +.fi +.PP +Functions may be defined as \fBvoid\fR. A void +funtion returns no value and thus may not be used in any place that needs +a value. A void function does not produce any output when called by itself +on an input line. The key word \fBvoid\fR is placed between the key word +\fBdefine\fR and the function name. For example, consider the following +session. +.nf +.RS +\f(CW +define py (y) { print "--->", y, "<---", "\en"; } +define void px (x) { print "--->", x, "<---", "\en"; } +py(1) +--->1<--- +0 +px(1) +--->1<--- +\fR +.RE +.fi +Since \fBpy\fR is not a void function, the call of \fBpy(1)\fR prints +the desired output and then prints a second line that is the value of +the function. Since the value of a function that is not given an +explicit return statement is zero, the zero is printed. For \fBpx(1)\fR, +no zero is printed because the function is a void function. +.PP +Also, call by variable for arrays was added. To declare +a call by variable array, the declaration of the array parameter in the +function definition looks like "\fI*name\fB[]\fR". The call to the +function remains the same as call by value arrays. +.SS MATH LIBRARY +If \fBbc\fR is invoked with the \fB-l\fR option, a math library is preloaded +and the default scale is set to 20. The math functions will calculate their +results to the scale set at the time of their call. +The math library defines the following functions: +.IP "s (\fIx\fR)" +The sine of x, x is in radians. +.IP "c (\fIx\fR)" +The cosine of x, x is in radians. +.IP "a (\fIx\fR)" +The arctangent of x, arctangent returns radians. +.IP "l (\fIx\fR)" +The natural logarithm of x. +.IP "e (\fIx\fR)" +The exponential function of raising e to the value x. +.IP "j (\fIn,x\fR)" +The Bessel function of integer order n of x. +.SS EXAMPLES +In /bin/sh, the following will assign the value of "pi" to the shell +variable \fBpi\fR. +.RS +\f(CW +pi=$(echo "scale=10; 4*a(1)" | bc -l) +\fR +.RE +.PP +The following is the definition of the exponential function used in the +math library. This function is written in POSIX \fBbc\fR. +.nf +.RS +\f(CW +scale = 20 + +/* Uses the fact that e^x = (e^(x/2))^2 + When x is small enough, we use the series: + e^x = 1 + x + x^2/2! + x^3/3! + ... +*/ + +define e(x) { + auto a, d, e, f, i, m, v, z + + /* Check the sign of x. */ + if (x<0) { + m = 1 + x = -x + } + + /* Precondition x. */ + z = scale; + scale = 4 + z + .44*x; + while (x > 1) { + f += 1; + x /= 2; + } + + /* Initialize the variables. */ + v = 1+x + a = x + d = 1 + + for (i=2; 1; i++) { + e = (a *= x) / (d *= i) + if (e == 0) { + if (f>0) while (f--) v = v*v; + scale = z + if (m) return (1/v); + return (v/1); + } + v += e + } +} +\fR +.RE +.fi +.PP +The following is code that uses the extended features of \fBbc\fR to +implement a simple program for calculating checkbook balances. This +program is best kept in a file so that it can be used many times +without having to retype it at every use. +.nf +.RS +\f(CW +scale=2 +print "\enCheck book program!\en" +print " Remember, deposits are negative transactions.\en" +print " Exit by a 0 transaction.\en\en" + +print "Initial balance? "; bal = read() +bal /= 1 +print "\en" +while (1) { + "current balance = "; bal + "transaction? "; trans = read() + if (trans == 0) break; + bal -= trans + bal /= 1 +} +quit +\fR +.RE +.fi +.PP +The following is the definition of the recursive factorial function. +.nf +.RS +\f(CW +define f (x) { + if (x <= 1) return (1); + return (f(x-1) * x); +} +\fR +.RE +.fi +.SS READLINE AND LIBEDIT OPTIONS +GNU \fBbc\fR can be compiled (via a configure option) to use the GNU +\fBreadline\fR input editor library or the BSD \fBlibedit\fR library. +This allows the user to do editing of lines before sending them +to \fBbc\fR. It also allows for a history of previous lines typed. +When this option is selected, \fBbc\fR has one more special variable. +This special variable, \fBhistory\fR is the number of lines of history +retained. For \fBreadline\fR, a value of -1 means that an unlimited +number of history lines are retained. Setting the value of +\fBhistory\fR to a positive number restricts the number of history +lines to the number given. The value of 0 disables the history +feature. The default value is 100. For more information, read the +user manuals for the GNU \fBreadline\fR, \fBhistory\fR and BSD \fBlibedit\fR +libraries. One can not enable both \fBreadline\fR and \fBlibedit\fR +at the same time. +.SS DIFFERENCES +This version of +.B bc +was implemented from the POSIX P1003.2/D11 draft and contains +several differences and extensions relative to the draft and +traditional implementations. +It is not implemented in the traditional way using +.I dc(1). +This version is a single process which parses and runs a byte code +translation of the program. There is an "undocumented" option (-c) +that causes the program to output the byte code to +the standard output instead of running it. It was mainly used for +debugging the parser and preparing the math library. +.PP +A major source of differences is +extensions, where a feature is extended to add more functionality and +additions, where new features are added. +The following is the list of differences and extensions. +.IP "LANG environment" +This version does not conform to the POSIX standard in the processing +of the LANG environment variable and all environment variables starting +with LC_. +.IP "names" +Traditional and POSIX +.B bc +have single letter names for functions, variables and arrays. They have +been extended to be multi-character names that start with a letter and +may contain letters, numbers and the underscore character. +.IP "Strings" +Strings are not allowed to contain NUL characters. POSIX says all characters +must be included in strings. +.IP "last" +POSIX \fBbc\fR does not have a \fBlast\fR variable. Some implementations +of \fBbc\fR use the period (.) in a similar way. +.IP "comparisons" +POSIX \fBbc\fR allows comparisons only in the if statement, the while +statement, and the second expression of the for statement. Also, only +one relational operation is allowed in each of those statements. +.IP "if statement, else clause" +POSIX \fBbc\fR does not have an else clause. +.IP "for statement" +POSIX \fBbc\fR requires all expressions to be present in the for statement. +.IP "&&, ||, !" +POSIX \fBbc\fR does not have the logical operators. +.IP "read function" +POSIX \fBbc\fR does not have a read function. +.IP "print statement" +POSIX \fBbc\fR does not have a print statement . +.IP "continue statement" +POSIX \fBbc\fR does not have a continue statement. +.IP "return statement" +POSIX \fBbc\fR requires parentheses around the return expression. +.IP "array parameters" +POSIX \fBbc\fR does not (currently) support array parameters in full. +The POSIX grammar allows for arrays in function definitions, but does +not provide a method to specify an array as an actual parameter. (This +is most likely an oversight in the grammar.) Traditional implementations +of \fBbc\fR have only call by value array parameters. +.IP "function format" +POSIX \fBbc\fR requires the opening brace on the same line as the +\fBdefine\fR key word and the \fBauto\fR statement on the next line. +.IP "=+, =-, =*, =/, =%, =^" +POSIX \fBbc\fR does not require these "old style" assignment operators to +be defined. This version may allow these "old style" assignments. Use +the limits statement to see if the installed version supports them. If +it does support the "old style" assignment operators, the statement +"a =- 1" will decrement \fBa\fR by 1 instead of setting \fBa\fR to the +value -1. +.IP "spaces in numbers" +Other implementations of \fBbc\fR allow spaces in numbers. For example, +"x=1 3" would assign the value 13 to the variable x. The same statement +would cause a syntax error in this version of \fBbc\fR. +.IP "errors and execution" +This implementation varies from other implementations in terms of what +code will be executed when syntax and other errors are found in the +program. If a syntax error is found in a function definition, error +recovery tries to find the beginning of a statement and continue to +parse the function. Once a syntax error is found in the function, the +function will not be callable and becomes undefined. +Syntax errors in the interactive execution code will invalidate the +current execution block. The execution block is terminated by an +end of line that appears after a complete sequence of statements. +For example, +.nf +.RS +a = 1 +b = 2 +.RE +.fi +has two execution blocks and +.nf +.RS +{ a = 1 + b = 2 } +.RE +.fi +has one execution block. Any runtime error will terminate the execution +of the current execution block. A runtime warning will not terminate the +current execution block. +.IP "Interrupts" +During an interactive session, the SIGINT signal (usually generated by +the control-C character from the terminal) will cause execution of the +current execution block to be interrupted. It will display a "runtime" +error indicating which function was interrupted. After all runtime +structures have been cleaned up, a message will be printed to notify the +user that \fBbc\fR is ready for more input. All previously defined functions +remain defined and the value of all non-auto variables are the value at +the point of interruption. All auto variables and function parameters +are removed during the +clean up process. During a non-interactive +session, the SIGINT signal will terminate the entire run of \fBbc\fR. +.SS LIMITS +The following are the limits currently in place for this +.B bc +processor. Some of them may have been changed by an installation. +Use the limits statement to see the actual values. +.IP "BC_BASE_MAX" +The maximum output base is currently set at 999. The maximum input base +is 16. +.IP "BC_DIM_MAX" +This is currently an arbitrary limit of 65535 as distributed. Your +installation may be different. +.IP "BC_SCALE_MAX" +The number of digits after the decimal point is limited to INT_MAX digits. +Also, the number of digits before the decimal point is limited to INT_MAX +digits. +.IP "BC_STRING_MAX" +The limit on the number of characters in a string is INT_MAX characters. +.IP "exponent" +The value of the exponent in the raise operation (^) is limited to LONG_MAX. +.IP "variable names" +The current limit on the number of unique names is 32767 for each of +simple variables, arrays and functions. +.SH ENVIRONMENT VARIABLES +The following environment variables are processed by \fBbc\fR: +.IP "POSIXLY_CORRECT" +This is the same as the \fB-s\fR option. +.IP "BC_ENV_ARGS" +This is another mechanism to get arguments to \fBbc\fR. The +format is the same as the command line arguments. These arguments +are processed first, so any files listed in the environment arguments +are processed before any command line argument files. This allows +the user to set up "standard" options and files to be processed +at every invocation of \fBbc\fR. The files in the environment +variables would typically contain function definitions for functions +the user wants defined every time \fBbc\fR is run. +.IP "BC_LINE_LENGTH" +This should be an integer specifying the number of characters in an +output line for numbers. This includes the backslash and newline characters +for long numbers. As an extension, the value of zero disables the +multi-line feature. Any other value of this variable that is less than +3 sets the line length to 70. +.SH DIAGNOSTICS +If any file on the command line can not be opened, \fBbc\fR will report +that the file is unavailable and terminate. Also, there are compile +and run time diagnostics that should be self-explanatory. +.SH BUGS +Error recovery is not very good yet. +.PP +Email bug reports to +.BR bug-bc@gnu.org . +Be sure to include the word ``bc'' somewhere in the ``Subject:'' field. +.SH AUTHOR +.nf +Philip A. Nelson +philnelson@acm.org +.fi +.SH ACKNOWLEDGEMENTS +The author would like to thank Steve Sommars (Steve.Sommars@att.com) for +his extensive help in testing the implementation. Many great suggestions +were given. This is a much better product due to his involvement. -- cgit v1.2.3