.TH sane\-teco3 5 "14 Jul 2008" "" "SANE Scanner Access Now Easy"
.IX sane\-teco3
.SH NAME
sane\-teco3 \- SANE backend for TECO / RELISYS scanners
.SH DESCRIPTION
The
.B sane\-teco3
library implements a SANE (Scanner Access Now Easy) backend that
provides access to some TECO SCSI flatbed scanners. This backend
should be considered
.B alpha-quality
software! TECO scanners are sold under
various brands like RELYSIS, PIOTECH, TRUST. This backend may or
may not support yours.
.PP
The scanners that should work with this backend are:
.PP
.RS
.ft CR
.nf
  Vendor Model                 TECO model   status
  ---------------------------  ----------  ----------
  Relisys Scorpio                VM3552     tested
  Plustek OpticPro 2400SP        VM3552     untested
  PIOTECH Splendeur 3024         VM3552     tested
  Trust Imagery 2400 SP          VM3552     tested
  Trust Imagery 4800 SP+         VM3552     tested
  Trust Imagery 9600 SP          VM3552     untested
.fi
.ft R
.RE

The TECO VM number can usually be found at the back of the
scanner. It is also part of the FCC ID.

The options the backend supports can either be selected through
command line options to programs like
.BR scanimage (1)
or through GUI
elements in
.BR xscanimage (1)
or
.BR xsane (1).

.br
If you have any success with a scanner not listed here, or if you notice
any strange behavior, please report to the backend maintainer or to
the SANE mailing list.

.SH OPTIONS
Valid command line options and their syntax can be listed by using:

.RS
scanimage \-\-help \-d teco3
.RE

.TP
.B Scan Mode

.TP
.B \-\-mode Black & White|Grayscale|Color
Selects the basic mode of operation of the scanner.
The
.I Black & White
mode is black and white only (1 bit).
.I Grayscale
will produce 256 levels of gray (8 bits).
.I Color
will produce a 24-bit color image.

.TP
.B \-\-resolution 1..1200
Selects the resolution for a scan. The scanner can do all resolutions
between 1 and 1200, in increments of 1.

.TP
.B \-\-preview
Requests a preview scan. The resolution used for that scan is 22 dpi
and the scan area is the maximum allowed. The scan mode is user
selected. The default is "no".

.TP
.B Geometry options

.TP
.B \-l \-t \-x \-y
Control the scan area:
.B \-l
sets the top left x coordinate,
.B \-t
the top left y coordinate,
.B \-x
selects the width and
.B \-y
the height of the scan area.
All parameters are specified in millimeters by default.

.SH OPTIONS FOR COLOR MODE ONLY

.TP
.B \-\-custom\-gamma
Allows the user to specify a gamma table (see the
next 3 parameters).

.TP
.B \-\-red\-gamma\-table
Can be used to download a user defined
gamma table for the red channel. The table must be 1024 bytes long.

.TP
.B \-\-green\-gamma\-table
Can be used to download a user defined
gamma table for the green channel. The table must be 1024 bytes long.

.TP
.B \-\-blue\-gamma\-table
Can be used to download a user defined gamma table
for the blue channel. The table must be 1024 bytes long.


.SH CONFIGURATION FILE
The configuration file
.I /etc/sane.d/teco3.conf
supports only one item: the device name to use (eg
.IR /dev/scanner ).


.SH FILES
.TP
.I /usr/lib/sane/libsane\-teco3.a
The static library implementing this backend.
.TP
.I /usr/lib/sane/libsane\-teco3.so
The shared library implementing this backend (present on systems that
support dynamic loading).


.SH ENVIRONMENT
.TP
.B SANE_DEBUG_TECO3
If the library was compiled with debug support enabled, this
environment variable controls the debug level for this backend. E.g.,
a value of 128 requests all debug output to be printed. Smaller levels
reduce verbosity.


.SH LIMITATIONS
The windows TWAIN driver has many more options than this SANE
backend. However they are only software adjustments. This backend only
implements what the scanner can support.


.SH BUGS
Not much.


.SH "SEE ALSO"
.BR sane\-scsi (5),
.BR scanimage (1),
.BR xscanimage (1),
.BR xsane (1),
.BR sane (7)


.SH AUTHOR
.TP
The package is actively maintained by Frank Zago.
.I http://www.zago.net/sane/#teco3