'\" t .\" This man page is Copyright (c) 1998 by Andi Kleen. .\" .\" SPDX-License-Identifier: GPL-1.0-or-later .\" .\" Based on the original comments from Alexey Kuznetsov .\" Modified 2005-12-27 by Hasso Tepper .\" $Id: netlink.7,v 1.8 2000/06/22 13:23:00 ak Exp $ .TH netlink 7 2023-02-05 "Linux man-pages 6.04" .SH NAME netlink \- communication between kernel and user space (AF_NETLINK) .SH SYNOPSIS .nf .B #include .B #include .B #include .PP .BI "netlink_socket = socket(AF_NETLINK, " socket_type ", " netlink_family ); .fi .SH DESCRIPTION Netlink is used to transfer information between the kernel and user-space processes. It consists of a standard sockets-based interface for user space processes and an internal kernel API for kernel modules. The internal kernel interface is not documented in this manual page. There is also an obsolete netlink interface via netlink character devices; this interface is not documented here and is provided only for backward compatibility. .PP Netlink is a datagram-oriented service. Both .B SOCK_RAW and .B SOCK_DGRAM are valid values for .IR socket_type . However, the netlink protocol does not distinguish between datagram and raw sockets. .PP .I netlink_family selects the kernel module or netlink group to communicate with. The currently assigned netlink families are: .TP .B NETLINK_ROUTE Receives routing and link updates and may be used to modify the routing tables (both IPv4 and IPv6), IP addresses, link parameters, neighbor setups, queueing disciplines, traffic classes, and packet classifiers (see .BR rtnetlink (7)). .TP .BR NETLINK_W1 " (Linux 2.6.13 to Linux 2.16.17)" Messages from 1-wire subsystem. .TP .B NETLINK_USERSOCK Reserved for user-mode socket protocols. .TP .BR NETLINK_FIREWALL " (up to and including Linux 3.4)" .\" removed by commit d16cf20e2f2f13411eece7f7fb72c17d141c4a84 Transport IPv4 packets from netfilter to user space. Used by .I ip_queue kernel module. After a long period of being declared obsolete (in favor of the more advanced .I nfnetlink_queue feature), .B NETLINK_FIREWALL was removed in Linux 3.5. .TP .BR NETLINK_SOCK_DIAG " (since Linux 3.3)" .\" commit 7f1fb60c4fc9fb29fbb406ac8c4cfb4e59e168d6 Query information about sockets of various protocol families from the kernel (see .BR sock_diag (7)). .TP .BR NETLINK_INET_DIAG " (since Linux 2.6.14)" An obsolete synonym for .BR NETLINK_SOCK_DIAG . .TP .BR NETLINK_NFLOG " (up to and including Linux 3.16)" Netfilter/iptables ULOG. .TP .B NETLINK_XFRM .\" FIXME More details on NETLINK_XFRM needed. IPsec. .TP .BR NETLINK_SELINUX " (since Linux 2.6.4)" SELinux event notifications. .TP .BR NETLINK_ISCSI " (since Linux 2.6.15)" .\" FIXME More details on NETLINK_ISCSI needed. Open-iSCSI. .TP .BR NETLINK_AUDIT " (since Linux 2.6.6)" .\" FIXME More details on NETLINK_AUDIT needed. Auditing. .TP .BR NETLINK_FIB_LOOKUP " (since Linux 2.6.13)" .\" FIXME More details on NETLINK_FIB_LOOKUP needed. Access to FIB lookup from user space. .TP .BR NETLINK_CONNECTOR " (since Linux 2.6.14)" Kernel connector. See .I Documentation/driver\-api/connector.rst (or .I /Documentation/connector/connector.* .\" commit baa293e9544bea71361950d071579f0e4d5713ed in Linux 5.2 and earlier) in the Linux kernel source tree for further information. .TP .BR NETLINK_NETFILTER " (since Linux 2.6.14)" .\" FIXME More details on NETLINK_NETFILTER needed. Netfilter subsystem. .TP .BR NETLINK_SCSITRANSPORT " (since Linux 2.6.19)" .\" commit 84314fd4740ad73550c76dee4a9578979d84af48 .\" FIXME More details on NETLINK_SCSITRANSPORT needed. SCSI Transports. .TP .BR NETLINK_RDMA " (since Linux 3.0)" .\" commit b2cbae2c248776d81cc265ff7d48405b6a4cc463 .\" FIXME More details on NETLINK_RDMA needed. Infiniband RDMA. .TP .BR NETLINK_IP6_FW " (up to and including Linux 3.4)" Transport IPv6 packets from netfilter to user space. Used by .I ip6_queue kernel module. .TP .B NETLINK_DNRTMSG DECnet routing messages. .TP .BR NETLINK_KOBJECT_UEVENT " (since Linux 2.6.10)" .\" FIXME More details on NETLINK_KOBJECT_UEVENT needed. Kernel messages to user space. .TP .BR NETLINK_GENERIC " (since Linux 2.6.15)" Generic netlink family for simplified netlink usage. .TP .BR NETLINK_CRYPTO " (since Linux 3.2)" .\" commit a38f7907b926e4c6c7d389ad96cc38cec2e5a9e9 .\" Author: Steffen Klassert Netlink interface to request information about ciphers registered with the kernel crypto API as well as allow configuration of the kernel crypto API. .PP Netlink messages consist of a byte stream with one or multiple .I nlmsghdr headers and associated payload. The byte stream should be accessed only with the standard .B NLMSG_* macros. See .BR netlink (3) for further information. .PP In multipart messages (multiple .I nlmsghdr headers with associated payload in one byte stream) the first and all following headers have the .B NLM_F_MULTI flag set, except for the last header which has the type .BR NLMSG_DONE . .PP After each .I nlmsghdr the payload follows. .PP .in +4n .EX struct nlmsghdr { __u32 nlmsg_len; /* Length of message including header */ __u16 nlmsg_type; /* Type of message content */ __u16 nlmsg_flags; /* Additional flags */ __u32 nlmsg_seq; /* Sequence number */ __u32 nlmsg_pid; /* Sender port ID */ }; .EE .in .PP .I nlmsg_type can be one of the standard message types: .B NLMSG_NOOP message is to be ignored, .B NLMSG_ERROR message signals an error and the payload contains an .I nlmsgerr structure, .B NLMSG_DONE message terminates a multipart message. Error messages get the original request appended, unless the user requests to cap the error message, and get extra error data if requested. .PP .in +4n .EX struct nlmsgerr { int error; /* Negative errno or 0 for acknowledgements */ struct nlmsghdr msg; /* Message header that caused the error */ /* * followed by the message contents * unless NETLINK_CAP_ACK was set * or the ACK indicates success (error == 0). * For example Generic Netlink message with attributes. * message length is aligned with NLMSG_ALIGN() */ /* * followed by TLVs defined in enum nlmsgerr_attrs * if NETLINK_EXT_ACK was set */ }; .EE .in .PP A netlink family usually specifies more message types, see the appropriate manual pages for that, for example, .BR rtnetlink (7) for .BR NETLINK_ROUTE . .nh .ad l .TS tab(:); l s lB lx. Standard flag bits in \fInlmsg_flags\fP _ NLM_F_REQUEST:T{ Must be set on all request messages. T} NLM_F_MULTI:T{ The message is part of a multipart message terminated by .BR NLMSG_DONE . T} NLM_F_ACK:T{ Request for an acknowledgement on success. T} NLM_F_ECHO:T{ Echo this request. T} .TE .ad .hy .\" No right adjustment for text blocks in tables .nh .ad l .TS tab(:); l s lB lx. Additional flag bits for GET requests _ NLM_F_ROOT:T{ Return the complete table instead of a single entry. T} NLM_F_MATCH:T{ Return all entries matching criteria passed in message content. Not implemented yet. T} NLM_F_ATOMIC:T{ Return an atomic snapshot of the table. T} NLM_F_DUMP:T{ Convenience macro; equivalent to (NLM_F_ROOT|NLM_F_MATCH). T} .TE .ad .hy .\" FIXME NLM_F_ATOMIC is not used anymore? .PP Note that .B NLM_F_ATOMIC requires the .B CAP_NET_ADMIN capability or an effective UID of 0. .nh .ad l .TS tab(:); l s lB lx. Additional flag bits for NEW requests _ NLM_F_REPLACE:T{ Replace existing matching object. T} NLM_F_EXCL:T{ Don't replace if the object already exists. T} NLM_F_CREATE:T{ Create object if it doesn't already exist. T} NLM_F_APPEND:T{ Add to the end of the object list. T} .TE .ad .hy .PP .I nlmsg_seq and .I nlmsg_pid are used to track messages. .I nlmsg_pid shows the origin of the message. Note that there isn't a 1:1 relationship between .I nlmsg_pid and the PID of the process if the message originated from a netlink socket. See the .B ADDRESS FORMATS section for further information. .PP Both .I nlmsg_seq and .I nlmsg_pid .\" FIXME Explain more about nlmsg_seq and nlmsg_pid. are opaque to netlink core. .PP Netlink is not a reliable protocol. It tries its best to deliver a message to its destination(s), but may drop messages when an out-of-memory condition or other error occurs. For reliable transfer the sender can request an acknowledgement from the receiver by setting the .B NLM_F_ACK flag. An acknowledgement is an .B NLMSG_ERROR packet with the error field set to 0. The application must generate acknowledgements for received messages itself. The kernel tries to send an .B NLMSG_ERROR message for every failed packet. A user process should follow this convention too. .PP However, reliable transmissions from kernel to user are impossible in any case. The kernel can't send a netlink message if the socket buffer is full: the message will be dropped and the kernel and the user-space process will no longer have the same view of kernel state. It is up to the application to detect when this happens (via the .B ENOBUFS error returned by .BR recvmsg (2)) and resynchronize. .SS Address formats The .I sockaddr_nl structure describes a netlink client in user space or in the kernel. A .I sockaddr_nl can be either unicast (only sent to one peer) or sent to netlink multicast groups .RI ( nl_groups not equal 0). .PP .in +4n .EX struct sockaddr_nl { sa_family_t nl_family; /* AF_NETLINK */ unsigned short nl_pad; /* Zero */ pid_t nl_pid; /* Port ID */ __u32 nl_groups; /* Multicast groups mask */ }; .EE .in .PP .I nl_pid is the unicast address of netlink socket. It's always 0 if the destination is in the kernel. For a user-space process, .I nl_pid is usually the PID of the process owning the destination socket. However, .I nl_pid identifies a netlink socket, not a process. If a process owns several netlink sockets, then .I nl_pid can be equal to the process ID only for at most one socket. There are two ways to assign .I nl_pid to a netlink socket. If the application sets .I nl_pid before calling .BR bind (2), then it is up to the application to make sure that .I nl_pid is unique. If the application sets it to 0, the kernel takes care of assigning it. The kernel assigns the process ID to the first netlink socket the process opens and assigns a unique .I nl_pid to every netlink socket that the process subsequently creates. .PP .I nl_groups is a bit mask with every bit representing a netlink group number. Each netlink family has a set of 32 multicast groups. When .BR bind (2) is called on the socket, the .I nl_groups field in the .I sockaddr_nl should be set to a bit mask of the groups which it wishes to listen to. The default value for this field is zero which means that no multicasts will be received. A socket may multicast messages to any of the multicast groups by setting .I nl_groups to a bit mask of the groups it wishes to send to when it calls .BR sendmsg (2) or does a .BR connect (2). Only processes with an effective UID of 0 or the .B CAP_NET_ADMIN capability may send or listen to a netlink multicast group. Since Linux 2.6.13, .\" commit d629b836d151d43332492651dd841d32e57ebe3b messages can't be broadcast to multiple groups. Any replies to a message received for a multicast group should be sent back to the sending PID and the multicast group. Some Linux kernel subsystems may additionally allow other users to send and/or receive messages. As at Linux 3.0, the .BR NETLINK_KOBJECT_UEVENT , .BR NETLINK_GENERIC , .BR NETLINK_ROUTE , and .B NETLINK_SELINUX groups allow other users to receive messages. No groups allow other users to send messages. .SS Socket options To set or get a netlink socket option, call .BR getsockopt (2) to read or .BR setsockopt (2) to write the option with the option level argument set to .BR SOL_NETLINK . Unless otherwise noted, .I optval is a pointer to an .IR int . .TP .BR NETLINK_PKTINFO " (since Linux 2.6.14)" .\" commit 9a4595bc7e67962f13232ee55a64e063062c3a99 .\" Author: Patrick McHardy Enable .B nl_pktinfo control messages for received packets to get the extended destination group number. .TP .BR NETLINK_ADD_MEMBERSHIP ,\ NETLINK_DROP_MEMBERSHIP " (since Linux 2.6.14)" .\" commit 9a4595bc7e67962f13232ee55a64e063062c3a99 .\" Author: Patrick McHardy Join/leave a group specified by .IR optval . .TP .BR NETLINK_LIST_MEMBERSHIPS " (since Linux 4.2)" .\" commit b42be38b2778eda2237fc759e55e3b698b05b315 .\" Author: David Herrmann Retrieve all groups a socket is a member of. .I optval is a pointer to .B __u32 and .I optlen is the size of the array. The array is filled with the full membership set of the socket, and the required array size is returned in .IR optlen . .TP .BR NETLINK_BROADCAST_ERROR " (since Linux 2.6.30)" .\" commit be0c22a46cfb79ab2342bb28fde99afa94ef868e .\" Author: Pablo Neira Ayuso When not set, .B netlink_broadcast() only reports .B ESRCH errors and silently ignore .B ENOBUFS errors. .TP .BR NETLINK_NO_ENOBUFS " (since Linux 2.6.30)" .\" commit 38938bfe3489394e2eed5e40c9bb8f66a2ce1405 .\" Author: Pablo Neira Ayuso This flag can be used by unicast and broadcast listeners to avoid receiving .B ENOBUFS errors. .TP .BR NETLINK_LISTEN_ALL_NSID " (since Linux 4.2)" .\" commit 59324cf35aba5336b611074028777838a963d03b .\" Author: Nicolas Dichtel When set, this socket will receive netlink notifications from all network namespaces that have an .I nsid assigned into the network namespace where the socket has been opened. The .I nsid is sent to user space via an ancillary data. .TP .BR NETLINK_CAP_ACK " (since Linux 4.3)" .\" commit 0a6a3a23ea6efde079a5b77688541a98bf202721 .\" Author: Christophe Ricard The kernel may fail to allocate the necessary room for the acknowledgement message back to user space. This option trims off the payload of the original netlink message. The netlink message header is still included, so the user can guess from the sequence number which message triggered the acknowledgement. .SH VERSIONS The socket interface to netlink first appeared Linux 2.2. .PP Linux 2.0 supported a more primitive device-based netlink interface (which is still available as a compatibility option). This obsolete interface is not described here. .SH NOTES It is often better to use netlink via .I libnetlink or .I libnl than via the low-level kernel interface. .SH BUGS This manual page is not complete. .SH EXAMPLES The following example creates a .B NETLINK_ROUTE netlink socket which will listen to the .B RTMGRP_LINK (network interface create/delete/up/down events) and .B RTMGRP_IPV4_IFADDR (IPv4 addresses add/delete events) multicast groups. .PP .in +4n .EX struct sockaddr_nl sa; memset(&sa, 0, sizeof(sa)); sa.nl_family = AF_NETLINK; sa.nl_groups = RTMGRP_LINK | RTMGRP_IPV4_IFADDR; fd = socket(AF_NETLINK, SOCK_RAW, NETLINK_ROUTE); bind(fd, (struct sockaddr *) &sa, sizeof(sa)); .EE .in .PP The next example demonstrates how to send a netlink message to the kernel (pid 0). Note that the application must take care of message sequence numbers in order to reliably track acknowledgements. .PP .in +4n .EX struct nlmsghdr *nh; /* The nlmsghdr with payload to send */ struct sockaddr_nl sa; struct iovec iov = { nh, nh\->nlmsg_len }; struct msghdr msg; msg = { &sa, sizeof(sa), &iov, 1, NULL, 0, 0 }; memset(&sa, 0, sizeof(sa)); sa.nl_family = AF_NETLINK; nh\->nlmsg_pid = 0; nh\->nlmsg_seq = ++sequence_number; /* Request an ack from kernel by setting NLM_F_ACK */ nh\->nlmsg_flags |= NLM_F_ACK; sendmsg(fd, &msg, 0); .EE .in .PP And the last example is about reading netlink message. .PP .in +4n .EX int len; /* 8192 to avoid message truncation on platforms with page size > 4096 */ struct nlmsghdr buf[8192/sizeof(struct nlmsghdr)]; struct iovec iov = { buf, sizeof(buf) }; struct sockaddr_nl sa; struct msghdr msg; struct nlmsghdr *nh; msg = { &sa, sizeof(sa), &iov, 1, NULL, 0, 0 }; len = recvmsg(fd, &msg, 0); for (nh = (struct nlmsghdr *) buf; NLMSG_OK (nh, len); nh = NLMSG_NEXT (nh, len)) { /* The end of multipart message */ if (nh\->nlmsg_type == NLMSG_DONE) return; if (nh\->nlmsg_type == NLMSG_ERROR) /* Do some error handling */ ... /* Continue with parsing payload */ ... } .EE .in .SH SEE ALSO .BR cmsg (3), .BR netlink (3), .BR capabilities (7), .BR rtnetlink (7), .BR sock_diag (7) .PP .UR ftp://ftp.inr.ac.ru\:/ip\-routing\:/iproute2* information about libnetlink .UE .PP .UR http://www.infradead.org\:/\[ti]tgr\:/libnl/ information about libnl .UE .PP RFC 3549 "Linux Netlink as an IP Services Protocol"