path: root/po/ko/man8/hdparm.8.po

# Korean translation of manpages
# This file is distributed under the same license as the manpages-l10n package.
# Copyright © of this file:
msgid ""
msgstr ""
"Project-Id-Version: manpages-l10n\n"
"POT-Creation-Date: 2024-02-15 18:00+0100\n"
"PO-Revision-Date: 2000-07-29 08:57+0900\n"
"Last-Translator: Unknown <>\n"
"Language-Team: Korean <translation-team-ko@googlegroups.com>\n"
"Language: ko\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"

#. type: TH
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "HDPARM"
msgstr "HDPARM"

#. type: TH
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-tumbleweed
#, no-wrap
msgid "Sep 2022"
msgstr "2022년 9월"

#. type: TH
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-tumbleweed
#, no-wrap
msgid "Version 9.65"
msgstr ""

#. type: SH
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "NAME"
msgstr "이름"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, fuzzy
#| msgid "hdparm - get/set hard disk parameters"
msgid "hdparm - get/set SATA/IDE device parameters"
msgstr "hdparm - 하드 디스크의 설정을 보여주거나 설정을 조정합니다."

#. type: SH
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "SYNOPSIS"
msgstr "요약"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid "B<hdparm> [options] [device ...]"
msgstr ""

#. type: SH
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "DESCRIPTION"
msgstr "설명"

#. type: Plain text
#: archlinux fedora-40 fedora-rawhide mageia-cauldron opensuse-leap-15-6
#: opensuse-tumbleweed
msgid ""
"B<hdparm> provides a command line interface to various kernel interfaces "
"supported by the Linux SATA/PATA/SAS \"libata\" subsystem and the older IDE "
"driver subsystem.  Many newer (2008 and later)  USB drive enclosures now "
"also support \"SAT\" (SCSI-ATA Command Translation)  and therefore may also "
"work with hdparm.  E.g. recent WD \"Passport\" models and recent NexStar-3 "
"enclosures.  Some options may work correctly only with the latest kernels."
msgstr ""

#. type: SH
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "OPTIONS"
msgstr "옵션"

#. type: Plain text
#: archlinux fedora-40 fedora-rawhide mageia-cauldron opensuse-leap-15-6
#: opensuse-tumbleweed
msgid ""
"When no options are given, B<-acdgkmur> is assumed.  For \"Get/set\" "
"options, a query without the optional parameter (e.g. -d) will query (get)  "
"the device state, and with a parameter (e.g., -d0) will set the device state."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-a>"
msgstr "I<-a>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, fuzzy
#| msgid ""
#| "Get/set sector count for filesystem read-ahead.  This is used to improve "
#| "performance in sequential reads of large files, by prefetching additional "
#| "blocks in anticipation of them being needed by the running task.  In the "
#| "current kernel version (2.0.10) this has a default setting of 8 sectors "
#| "(4KB).  This value seems good for most purposes, but in a system where "
#| "most file accesses are random seeks, a smaller setting might provide "
#| "better performance.  Also, many IDE drives also have a separate built-in "
#| "read-ahead function, which alleviates the need for a filesystem read-"
#| "ahead in many situations."
msgid ""
"Get/set sector count for filesystem (software) read-ahead.  This is used to "
"improve performance in sequential reads of large files, by prefetching "
"additional blocks in anticipation of them being needed by the running task.  "
"Many IDE drives also have a separate built-in read-ahead function, which "
"augments this filesystem (software) read-ahead function."
msgstr ""
"파일 시스템의 미리 읽기(read-ahead) 섹터 수의 정보를 보여주거나 정할수 있습니"
"다. 이 옵션으로 큰 화일이 연속되는 경우의 성능이 증대될수 있으며, 그것은 실행"
"중인 작업이 필요하게 되는 예상의 추가적인 블럭을 미리 가져 옴으로써 성능을 증"
"대시킵니다. 지금의 커널 버젼 (2.0.10)  에서는 기본적으로 8 섹터 (4KB) 입니"
"다. 이 수치는 여러가지 용도로 적합해 보입니다만, 대부분의 화일을 비 순차적"
"(random) 으로 찾는 경우에는 작은 수치가 더 좋은 성능을 낼수 있습니다. 또한 많"
"은 IDE 장치에서 이미 내장된 미리 읽기(read-ahead) 기능을 가지고 있어 여러가"
"지 상황에서 파일 시스템 미리 읽기(read-ahead) 필요를 덜어 줍니다."

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-A>"
msgstr "I<-A>"

#. type: Plain text
#: archlinux fedora-40 fedora-rawhide mageia-cauldron opensuse-leap-15-6
#: opensuse-tumbleweed
#, fuzzy
#| msgid ""
#| "Disable/enable the IDE drive's read-lookahead feature (usually ON by "
#| "default)."
msgid ""
"Get/set the IDE drive\\'s read-lookahead feature (usually ON by default).  "
"Usage: B<-A0> (disable) or B<-A1> (enable)."
msgstr ""
"IDE 장치의 미리 읽기(read-lookahead) 기능을 끄거나 켤수 있습니다.  (대개 기본"
"적으로 기능이 켜져(ON) 있습니다)."

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-b>"
msgstr "I<-b>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid "Get/set bus state."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-B>"
msgstr "I<-B>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"Get/set Advanced Power Management feature, if the drive supports it. A low "
"value means aggressive power management and a high value means better "
"performance.  Possible settings range from values 1 through 127 (which "
"permit spin-down), and values 128 through 254 (which do not permit spin-"
"down).  The highest degree of power management is attained with a setting of "
"1, and the highest I/O performance with a setting of 254.  A value of 255 "
"tells hdparm to disable Advanced Power Management altogether on the drive "
"(not all drives support disabling it, but most do)."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-c>"
msgstr "I<-c>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, fuzzy
#| msgid ""
#| "Query/enable (E)IDE 32-bit I/O support.  A numeric parameter can be used "
#| "to enable/disable 32-bit I/O support: Currently supported values include "
#| "I<0> to disable 32-bit I/O support, I<1> to enable 32-bit data transfers, "
#| "and I<3> to enable 32-bit data transfers with a special I<sync> sequence "
#| "required by many chipsets.  The value I<3> works with nearly all 32-bit "
#| "IDE chipsets, but incurs slightly more overhead.  Note that \"32-bit\" "
#| "refers to data transfers across a PCI or VLB bus to the interface card "
#| "only; all (E)IDE drives still have only a 16-bit connection over the "
#| "ribbon cable from the interface card."
msgid ""
"Get/set (E)IDE 32-bit I/O support.  A numeric parameter can be used to "
"enable/disable 32-bit I/O support.  Currently supported values include B<0> "
"to disable 32-bit I/O support, B<1> to enable 32-bit data transfers, and "
"B<3> to enable 32-bit data transfers with a special B<sync> sequence "
"required by many chipsets.  The value B<3> works with nearly all 32-bit IDE "
"chipsets, but incurs slightly more overhead.  Note that \"32-bit\" refers to "
"data transfers across a PCI or VLB bus to the interface card only; all "
"(E)IDE drives still have only a 16-bit connection over the ribbon cable from "
"the interface card."
msgstr ""
"(E)IDE 장치의 32-bit 입출력(I/O) 기능을 켜거나 알아볼수 있습니다. 이 옵션에"
"서 숫자로 32-bit 입출력(I/O)을 조정할수 있습니다: 32-bit 입출력(I/O)를 끄려"
"면 I<0> ,32-bit 입출력(I/O)를 켜려면 I<1> ,마지막으로 여러 칩셋에서 요구되는 "
"특별한 동기 배열(sync sequence)을 포함한 32-bit 입출력(I/O)를 켜려면 I<3.> "
"이 값(3) 은 거의 모든 32-bit IDE 칩셋에서 동작하지만, 좀 더 부담(overhead)를 "
"줄수 있습니다. \"32-bit\" 데이터 전송이 PCI나 VLB 버스에서 인터페이스 카드 사"
"이라는 것을 명심합시다; 모든 (E)IDE 장치는 아직도 인터페이스 카드에서 장치까"
"지 16-bit 의 리본 케이블로 연결되어 있습니다."

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-C>"
msgstr "I<-C>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, fuzzy
#| msgid ""
#| "Check the current IDE power mode status, which will always be one of "
#| "B<unknown> (drive does not support this command), B<active/idle> (normal "
#| "operation), B<standby> (low power mode, drive has spun down), or "
#| "B<sleeping> (lowest power mode, drive is completely shut down).  The B<-"
#| "S, -y, -Y,> and B<-Z> flags can be used to manipulate the IDE power modes."
msgid ""
"Check the current IDE power mode status, which will always be one of "
"B<unknown> (drive does not support this command), B<active/idle> (normal "
"operation), B<standby> (low power mode, drive has spun down), or B<sleeping> "
"(lowest power mode, drive is completely shut down).  The B<-S, -y, -Y,> and "
"B<-Z> options can be used to manipulate the IDE power modes."
msgstr ""
"IDE 장치의 전원 모드 상태를 검사합니다. 이것은 항상 이 중 하나의 상태가 될 "
"것 입니다.  B<unknown> (장치가 이 명령어를 지원하지 않습니다.), B<active/"
"idle> (보통 상태입니다.), B<standby> (저 전력 상태입니다. 장치의 모터 회전이 "
"멈춥니다.), B<sleeping> (장치가 완전히 정지합니다.).  B<-S,-y,-Y,-Z> 옵션으"
"로 IDE 장치의 전원 모드를 조정 할 수 있습니다."

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-d>"
msgstr "I<-d>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, fuzzy
#| msgid ""
#| "Disable/enable the \"using_dma\" flag for this drive.  This option only "
#| "works with a few combinations of drives and interfaces which support DMA "
#| "and which are known to the IDE driver (and with all supported XT "
#| "interfaces).  In particular, the Intel Triton chipset is supported for "
#| "bus-mastered DMA operation with many drives (experimental).  It is also a "
#| "good idea to use the I<-X34> option in combination with I<-d1> to ensure "
#| "that the drive itself is programmed for multiword DMA mode2.  Using DMA "
#| "does not necessarily provide any improvement in throughput or system "
#| "performance, but many folks swear by it.  Your mileage may vary."
msgid ""
"Get/set the \"using_dma\" flag for this drive.  This option now works with "
"most combinations of drives and PCI interfaces which support DMA and which "
"are known to the kernel IDE driver.  It is also a good idea to use the "
"appropriate B<-X> option in combination with B<-d1> to ensure that the drive "
"itself is programmed for the correct DMA mode, although most BIOSs should do "
"this for you at boot time.  Using DMA nearly always gives the best "
"performance, with fast I/O throughput and low CPU usage.  But there are at "
"least a few configurations of chipsets and drives for which DMA does not "
"make much of a difference, or may even slow things down (on really messed up "
"hardware!).  Your mileage may vary."
msgstr ""
"장치의 직접 메모리 접근(DMA) 옵션을 켜거나 끌수 있습니다. 이 옵션은 DMA 를 지"
"원하고 IDE 구동기로 알려진 소수의 드라이브와 인터페이스의 조합에서 동작합니"
"다.( 그리고 XT 인터페이스 )  특별히, Intel Triton 칩셋은 많은 드라이브와 bus-"
"mastered DMA의 동작이 지원됩니다. (실험적)  장치가 확실히 multiword DMA "
"mode2 로 제작되었다면 I<-X34> 옵션을 I<-d1> 옵션과 같이 설정하는 것도 좋을 "
"것 이다.  DMA 옵션을 사용하는 것은 처리량이나 시스템 성능 증가에 어떠한 증진"
"에도 필요한 장치는 아니지만, 많은 사람들은 성능이 증가한다고 분명히 알고있습"
"니다.. 당신이 생각하는 유용성은 아마 여러가지 일 것입니다."

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<--dco-freeze>"
msgstr "I<--dco-freeze>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"DCO stands for Device Configuration Overlay, a way for vendors to "
"selectively disable certain features of a drive.  The B<--dco-freeze> option "
"will freeze/lock the current drive configuration, thereby preventing "
"software (or malware)  from changing any DCO settings until after the next "
"power-on reset."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<--dco-identify>"
msgstr "I<--dco-identify>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"Query and dump information regarding drive configuration settings which can "
"be disabled by the vendor or OEM installer.  These settings show "
"capabilities of the drive which might be disabled by the vendor for "
"\"enhanced compatibility\".  When disabled, they are otherwise hidden and "
"will not show in the B<-I> identify output.  For example, system vendors "
"sometimes disable 48_bit addressing on large drives, for compatibility (and "
"loss of capacity)  with a specific BIOS.  In such cases, B<--dco-identify> "
"will show that the drive is 48_bit capable, but B<-I> will not show it, and "
"nor will the drive accept 48_bit commands."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<--dco-restore>"
msgstr "I<--dco-restore>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"Reset all drive settings, features, and accessible capacities back to "
"factory defaults and full capabilities.  This command will fail if DCO is "
"frozen/locked, or if a B<-Np> maximum size restriction has also been set.  "
"This is B<EXTREMELY DANGEROUS> and will very likely cause massive loss of "
"data.  B<DO NOT USE THIS COMMAND.>"
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<--direct>"
msgstr "I<--direct>"

#. type: Plain text
#: archlinux fedora-40 fedora-rawhide mageia-cauldron opensuse-leap-15-6
#: opensuse-tumbleweed
msgid ""
"Use the kernel\\'s \"O_DIRECT\" flag when performing a B<-t> timing test.  "
"This bypasses the page cache, causing the reads to go directly from the "
"drive into hdparm's buffers, using so-called \"raw\" I/O.  In many cases, "
"this can produce results that appear much faster than the usual page cache "
"method, giving a better indication of raw device and driver performance."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<--drq-hsm-error>"
msgstr "I<--drq-hsm-error>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"B<VERY DANGEROUS, DON'T EVEN THINK ABOUT USING IT.> This option causes "
"hdparm to issue an IDENTIFY command to the kernel, but incorrectly marked as "
"a \"non-data\" command.  This results in the drive being left with its "
"DataReQust(DRQ) line \"stuck\" high.  This confuses the kernel drivers, and "
"may crash the system immediately with massive data loss.  The option exists "
"to help in testing and fortifying the kernel against similar real-world "
"drive malfunctions.  B<VERY DANGEROUS, DO NOT USE!!>"
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-D>"
msgstr "I<-D>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"Enable/disable the on-drive defect management feature, whereby the drive "
"firmware tries to automatically manage defective sectors by relocating them "
"to \"spare\" sectors reserved by the factory for such.  Control of this "
"feature via the B<-D> option is not supported for most modern drives since "
"ATA-4; thus this command may fail."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-E>"
msgstr "I<-E>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, fuzzy
#| msgid ""
#| "Set cdrom speed.  This is NOT necessary for regular operation, as the "
#| "drive will automatically switch speeds on its own.  But if you want to "
#| "play with it, just supply a speed number after the option, usually a "
#| "number like 2 or 4."
msgid ""
"Set cd/dvd drive speed.  This is NOT necessary for regular operation, as the "
"drive will automatically switch speeds on its own.  But if you want to play "
"with it, just supply a speed number after the option, usually a number like "
"2 or 4.  This can be useful in some cases, though, to smooth out DVD video "
"playback."
msgstr ""
"CD-ROM의 속도를 설정합니다. 이것은 CD-ROM이 자동적으로 속도를 바꾸기 때문에 "
"일반적으로 필요한 옵션은 아닙니다. 하지만 만약 당신이 속도를 바꾸기를 원한다"
"면, 적당한 속도를 숫자로 주시길 바랍니다. 대개 속도는 2또는 4 입니다."

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-f>"
msgstr "I<-f>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, fuzzy
#| msgid ""
#| "Sync and flush the buffer cache for the device on exit.  This operation "
#| "is also performed as part of the I<-t> and I<-T> timings."
msgid ""
"Sync and flush the buffer cache for the device on exit.  This operation is "
"also performed internally as part of the B<-t> and B<-T> timings and other "
"options."
msgstr ""
"장치가 나갈때 버퍼 캐쉬(buffer cache)를 동기화 시키고 비웁니다. 이 동작은 또"
"한 I<-t> 와 I<-T> 옵션이 동작할때 같이 실행됩니다."

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<--fallocate>"
msgstr "I<--fallocate>"

#. type: Plain text
#: archlinux fedora-40 fedora-rawhide mageia-cauldron opensuse-leap-15-6
#: opensuse-tumbleweed
msgid ""
"This option currently works only on ext4 and xfs filesystem types.  When "
"used, this must be the only option given.  It requires two parameters: the "
"desired file size in kilo-bytes (byte count divided by 1024), followed by "
"the pathname for the new file.  It will create a new file of the specified "
"size, but without actually having to write any data to the file.  This will "
"normally complete very quickly, and without thrashing the storage device."
msgstr ""

#. type: Plain text
#: archlinux fedora-40 fedora-rawhide mageia-cauldron opensuse-leap-15-6
#: opensuse-tumbleweed
msgid "E.g. Create a 10KByte file: B<hdparm --fallocate 10 temp_file>"
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<--fibmap>"
msgstr "I<--fibmap>"

#. type: Plain text
#: archlinux fedora-40 fedora-rawhide mageia-cauldron opensuse-leap-15-6
#: opensuse-tumbleweed
msgid ""
"When used, this must be the only option given.  It requires a file path as a "
"parameter, and will print out a list of the block extents (sector ranges)  "
"occupied by that file on disk.  Sector numbers are given as absolute LBA "
"numbers, referenced from sector 0 of the physical device rather than from "
"the partition or filesystem.  This information can then be used for a "
"variety of purposes, such as examining the degree of fragmenation of larger "
"files, or determining appropriate sectors to deliberately corrupt during "
"fault-injection testing procedures."
msgstr ""

#. type: Plain text
#: archlinux fedora-40 fedora-rawhide mageia-cauldron opensuse-leap-15-6
#: opensuse-tumbleweed
msgid ""
"This option uses the new FIEMAP (file extent map) ioctl() when available, "
"and falls back to the older FIBMAP (file block map) ioctl() otherwise.  Note "
"that FIBMAP suffers from a 32-bit block-number interface, and thus not work "
"beyond 8TB or 16TB.  FIBMAP is also very slow, and does not deal well with "
"preallocated uncommitted extents in ext4/xfs filesystems, unless a sync() is "
"done before using this option."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<--fwdownload>"
msgstr "I<--fwdownload>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"When used, this should be the only option given.  It requires a file path "
"immediately after the option, indicating where the new drive firmware should "
"be read from.  The contents of this file will be sent to the drive using the "
"(S)ATA B<DOWNLOAD MICROCODE> command, using either transfer protocol 7 "
"(entire file at once), or, if the drive supports it, transfer protocol 3 "
"(segmented download).  This command is B<EXTREMELY DANGEROUS> and could "
"destroy both the drive and all data on it.  B<DO NOT USE THIS COMMAND.> The "
"B<--fwdownload-mode3> , B<--fwdownload-mode3-max> , and B<--fwdownload-"
"mode7> variations on basic B<--fwdownload> allow overriding automatic "
"protocol detection in favour of forcing hdparm to use a specific transfer "
"protocol, for testing purposes only."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-F>"
msgstr "I<-F>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"Flush the on-drive write cache buffer (older drives may not implement this)."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-g>"
msgstr "I<-g>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"Display the drive geometry (cylinders, heads, sectors), the size (in "
"sectors) of the device, and the starting offset (in sectors) of the device "
"from the beginning of the drive."
msgstr ""
"장치의 구조 (실린더, 헤드, 섹터), 장치의 크기 (섹터), 그리고 장치의 시작 변위"
"(offset) (섹터)를 장치의 시작부분에서 표시합니다."

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-h>"
msgstr "I<-h>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid "Display terse usage information (help)."
msgstr "사용 방법을 간결하게 표시합니다. (help)"

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-H>"
msgstr "I<-H>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"Read the temperature from some (mostly Hitachi) drives.  Also reports if the "
"temperature is within operating condition range (this may not be reliable). "
"Does not cause the drive to spin up if idle."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-i>"
msgstr "I<-i>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, fuzzy
#| msgid ""
#| "Display the identification info that was obtained from the drive at boot "
#| "time, if available.  This is a feature of modern IDE drives, and may not "
#| "be supported by older devices.  The data returned may or may not be "
#| "current, depending on activity since booting the system.  However, the "
#| "current multiple sector mode count is always shown.  For a more detailed "
#| "interpretation of the identification info, refer to I<AT Attachment "
#| "Interface for Disk Drives> (ANSI ASC X3T9.2 working draft, revision 4a, "
#| "April 19/93)."
msgid ""
"Display the identification info which the kernel drivers (IDE, libata)  have "
"stored from boot/configuration time.  This may differ from the current "
"information obtainable directly from the drive itself with the B<-I> "
"option.  The data returned may or may not be current, depending on activity "
"since booting the system.  For a more detailed interpretation of the "
"identification info, refer to I<AT Attachment Interface for Disk Drives,> "
"ANSI ASC X3T9.2 working draft, revision 4a, April 19/93, and later editions."
msgstr ""
"가능하다면 부트 시간에 얻을수 있는 확인 정보를 표시합니다. 이것은 지금의 IDE "
"장치의 특징이고, 오래된 장치에서는 아마 지원하지 않을 것 입니다. 이 옵션으로 "
"얻을수 있는 정보가 옳던, 옳지 않던 , 그것은 시스템의 부팅에서 얻어지는 것 입"
"니다. 하지만 현재의 다중 섹터 모드 수는 항상 보여 질 것 입니다. 확인 정보의 "
"해석에 관해 좀 더 알고 싶다면 I<AT Attachment Interface for Disk Drives> "
"(ANSI ASC X3T9.2 working draft, revision 4a, April 19/93)을 참고 하시길 바랍"
"니다."

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<--idle-immediate>"
msgstr "I<--idle-immediate>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"Issue an ATA IDLE_IMMEDIATE command, to put the drive into a lower power "
"state.  Usually the device remains spun-up."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<--idle-unload>"
msgstr "I<--idle-unload>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"Issue an ATA IDLE_IMMEDIATE_WITH_UNLOAD command, to unload or park the heads "
"and put the drive into a lower power state.  Usually the device remains spun-"
"up."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-I>"
msgstr "I<-I>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, fuzzy
#| msgid ""
#| "Request identification info directly from the drive, which is displayed "
#| "in its raw form with no endian changes or corrections.  Otherwise similar "
#| "to the I<-i> option."
msgid ""
"Request identification info directly from the drive, which is displayed in a "
"new expanded format with considerably more detail than with the older B<-i> "
"option."
msgstr ""
"장치로 부터 직접 어떠한 변화나 수정이 없는 본래의 확인 정보를 요청합니다. 딴 "
"방법으로는 유사한 I<-i> 옵션이 있습니다."

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<--Iraw E<lt>pathnameE<gt>>"
msgstr ""

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"This option dumps the drive's identify data in raw binary to the specified "
"file."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<--Istdin>"
msgstr "I<--Istdin>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-tumbleweed
msgid ""
"This is a special variation on the B<-I> option, which accepts a drive "
"identification block as standard input instead of using a /dev/hd* "
"parameter.  The format of this block must be B<exactly> the same as that "
"found in the /proc/ide/*/hd*/identify \"files\", or that produced by the B<--"
"Istdout> option described below.  This variation is designed for use with "
"collected \"libraries\" of drive identification information, and can also be "
"used on ATAPI drives which may give media errors with the standard "
"mechanism.  When B<--Istdin> is used, it must be the *only* parameter "
"given.  Note that some information will be incomplete, as the drive LOG "
"PAGES are unavailable when B<--Istdin> is used."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<--Istdout>"
msgstr "I<--Istdout>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"This option dumps the drive's identify data in hex to stdout, in a format "
"similar to that from /proc/ide/*/identify, and suitable for later use with "
"the B<--Istdin> option."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-J>"
msgstr "I<-J>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"Get/set the Western Digital (WD) Green Drive's \"idle3\" timeout value.  "
"This timeout controls how often the drive parks its heads and enters a low "
"power consumption state.  The factory default is eight (8) seconds, which is "
"a very poor choice for use with Linux.  Leaving it at the default will "
"result in hundreds of thousands of head load/unload cycles in a very short "
"period of time.  The drive mechanism is only rated for 300,000 to 1,000,000 "
"cycles, so leaving it at the default could result in premature failure, not "
"to mention the performance impact of the drive often having to wake-up "
"before doing routine I/O."
msgstr ""

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"WD supply a WDIDLE3.EXE DOS utility for tweaking this setting, and you "
"should use that program instead of hdparm if at all possible.  The reverse-"
"engineered implementation in hdparm is not as complete as the original "
"official program, even though it does seem to work on at a least a few "
"drives.  A full power cycle is required for any change in setting to take "
"effect, regardless of which program is used to tweak things."
msgstr ""

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"A setting of 30 seconds is recommended for Linux use.  Permitted values are "
"from 8 to 12 seconds, and from 30 to 300 seconds in 30-second increments.  "
"Specify a value of zero (0) to disable the WD idle3 timer completely (NOT "
"RECOMMENDED!)."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-k>"
msgstr "I<-k>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, fuzzy
#| msgid ""
#| "Get/set the keep_settings_over_reset flag for the drive.  When this flag "
#| "is set, the driver will preserve the I<-dmu> options over a soft reset, "
#| "(as done during the error recovery sequence).  This flag defaults to off, "
#| "to prevent drive reset loops which could be caused by combinations of I<-"
#| "dmu> settings.  The I<-k> flag should therefore only be set after one has "
#| "achieved confidence in correct system operation with a chosen set of "
#| "configuration settings.  In practice, all that is typically necessary to "
#| "test a configuration (prior to using -k) is to verify that the drive can "
#| "be read/written, and that no error logs (kernel messages) are generated "
#| "in the process (look in /var/adm/messages on most systems)."
msgid ""
"Get/set the \"keep_settings_over_reset\" flag for the drive.  When this flag "
"is set, the drive will preserve the B<-dmu> settings over a soft reset, (as "
"done during the error recovery sequence).  This option defaults to off, to "
"prevent drive reset loops which could be caused by combinations of B<-dmu> "
"settings.  The B<-k> option should therefore only be set after one has "
"achieved confidence in correct system operation with a chosen set of "
"configuration settings.  In practice, all that is typically necessary to "
"test a configuration (prior to using -k) is to verify that the drive can be "
"read/written, and that no error logs (kernel messages) are generated in the "
"process (look in /var/log/messages on most systems)."
msgstr ""
"장치의 리셋에도 셋팅을 유지하는 옵션(keep_settings_over_rest)을 설정하거나 보"
"여줍니다. 이 옵션을 설정 되었을때, 장치는 소프트 리셋을 넘어 I<-dmu> 옵션을 "
"보존합니다, (에러 복구 순서동안 끝남으로). 이 옵션은 기본적으로 I<-dmu> 옵션"
"의 조합으로 일으킬 수 있는 리셋의 순환을 막기위해 꺼져(off)  있습니다.  I<-"
"k> 옵션은 그런 까닭에 선택된 설정이 올바른 시스템 동작과 그에 따른 자신이 있"
"을때 설정되어야 합니다. ( -k 옵션 ) 실행에 앞서, 기본적으로 설정을 시험해 보"
"는 것이 필요하며, 그것은 장치가 읽기/쓰기에 문제가 없고, 어떠한 에러 기록(커"
"널 메세지)도 나오지 않아야 한다.(대부분의 시스템에서는 /var/adm/messages 를 "
"보자)"

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-K>"
msgstr "I<-K>"

#. type: Plain text
#: archlinux fedora-40 fedora-rawhide mageia-cauldron opensuse-leap-15-6
#: opensuse-tumbleweed
#, fuzzy
#| msgid ""
#| "Set the drive's keep_features_over_reset flag.  Setting this enables the "
#| "drive to retain the settings for I<-APSWXZ> over a soft reset (as done "
#| "during the error recovery sequence).  Not all drives support this feature."
msgid ""
"Set the drive\\'s \"keep_features_over_reset\" flag.  Setting this enables "
"the drive to retain the settings for B<-APSWXZ> over a soft reset (as done "
"during the error recovery sequence).  Not all drives support this feature."
msgstr ""
"리셋에도 특징을 유지하는 옵션(keep_features_over_reset)을 설정합니다.  이 옵"
"션은 장치를 소프트 리셋에도 I<-APSWXZ> 옵션으로 유지시킵니다, (에러 복구 순서"
"동안 끝남으로). 모든 장치가 이것을 지원하는 것은 아닙니다."

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-L>"
msgstr "I<-L>"

#. type: Plain text
#: archlinux fedora-40 fedora-rawhide mageia-cauldron opensuse-leap-15-6
#: opensuse-tumbleweed
#, fuzzy
#| msgid ""
#| "maintains the door locking mechanism automatically, depending on drive "
#| "usage (locked whenever a filesystem is mounted).  But on system shutdown, "
#| "this can be a nuisance if the root partition is on a removeable disk, "
#| "since the root partition is left mounted (read-only) after shutdown.  So, "
#| "by using this command to unlock the door -b after the root filesystem is "
#| "remounted read-only, one can then remove the cartridge from the drive "
#| "after shutdown."
msgid ""
"Set the drive\\'s doorlock flag.  Setting this to B<1> will lock the door "
"mechanism of some removable hard drives (e.g. Syquest, ZIP, Jazz..), and "
"setting it to B<0> will unlock the door mechanism.  Normally, Linux "
"maintains the door locking mechanism automatically, depending on drive usage "
"(locked whenever a filesystem is mounted).  But on system shutdown, this can "
"be a nuisance if the root partition is on a removable disk, since the root "
"partition is left mounted (read-only) after shutdown.  So, by using this "
"command to unlock the door B<after> the root filesystem is remounted read-"
"only, one can then remove the cartridge from the drive after shutdown."
msgstr ""
"으로 설정하므로써 도어락을 풀 수 있습니다. 일반적으로 리눅스는 디스크 사용에 "
"따라 도어락을 자동적으로 유지합니다.(마운트 되어 있다면 언제든지 도어락이 작"
"동됩니다.) 하지만 시스템의 셧다운시, 만약 루트 파티션이 이동성 장치에 있다면 "
"루트파티션이 셧다운후에도 (read-only상태의)마운트된채로 남아있어 성가실수 있"
"습니다. 그렇기 때문에 셧다운후에 카트리지를 제거할수 있도록 루트 파일시스템"
"이 read-only 상태로 재 마운트 된후 도어락을 풀수 있도록 이 옵션을 사용합니다."

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-m>"
msgstr "I<-m>"

#. type: Plain text
#: archlinux fedora-40 fedora-rawhide mageia-cauldron opensuse-leap-15-6
#: opensuse-tumbleweed
#, fuzzy
#| msgid ""
#| "Get/set sector count for multiple sector I/O on the drive.  A setting of "
#| "B<0> disables this feature.  Multiple sector mode (aka IDE Block Mode), "
#| "is a feature of most modern IDE hard drives, permitting the transfer of "
#| "multiple sectors per I/O interrupt, rather than the usual one sector per "
#| "interrupt.  When this feature is enabled, it typically reduces operating "
#| "system overhead for disk I/O by 30-50%.  On many systems, it also "
#| "provides increased data throughput of anywhere from 5% to 50%.  Some "
#| "drives, however (most notably the WD Caviar series), seem to run slower "
#| "with multiple mode enabled.  Your mileage may vary.  Most drives support "
#| "the minimum settings of 2, 4, 8, or 16 (sectors).  Larger settings may "
#| "also be possible, depending on the drive.  A setting of 16 or 32 seems "
#| "optimal on many systems.  Western Digital recommends lower settings of 4 "
#| "to 8 on many of their drives, due tiny (32kB) drive buffers and non-"
#| "optimized buffering algorithms.  The B<-i> flag can be used to find the "
#| "maximum setting supported by an installed drive (look for MaxMultSect in "
#| "the output).  Some drives claim to support multiple mode, but lose data "
#| "at some settings.  Under rare circumstances, such failures can result in "
#| "B<massive filesystem corruption.>"
msgid ""
"Get/set sector count for multiple sector I/O on the drive.  A setting of "
"B<0> disables this feature.  Multiple sector mode (aka IDE Block Mode), is a "
"feature of most modern IDE hard drives, permitting the transfer of multiple "
"sectors per I/O interrupt, rather than the usual one sector per interrupt.  "
"When this feature is enabled, it typically reduces operating system overhead "
"for disk I/O by 30-50%.  On many systems, it also provides increased data "
"throughput of anywhere from 5% to 50%.  Some drives, however (most notably "
"the WD Caviar series), seem to run slower with multiple mode enabled.  Your "
"mileage may vary.  Most drives support the minimum settings of 2, 4, 8, or "
"16 (sectors).  Larger settings may also be possible, depending on the "
"drive.  A setting of 16 or 32 seems optimal on many systems.  Western "
"Digital recommends lower settings of 4 to 8 on many of their drives, due "
"tiny (32kB) drive buffers and non-optimized buffering algorithms.  The B<-i> "
"option can be used to find the maximum setting supported by an installed "
"drive (look for MaxMultSect in the output).  Some drives claim to support "
"multiple mode, but lose data at some settings.  Under rare circumstances, "
"such failures can result in B<massive filesystem corruption.>"
msgstr ""
"장치의 다중 섹터 입출력(I/O)을 위해 섹터 수를 설정하거나 정보를 알아냅니다. "
"이 옵션을 끄기 위해서는 B<0> 을 사용합니다. IDE 블럭 모드로 알려진 다중 섹터 "
"모드는 지금의 IDE 하드 장치의 특징이며, 이것은 한 인터럽트당 하나의 섹터를 전"
"송하는 것에 비해 한 인터럽트당 여러개의 섹터를 전송을 가능하게 합니다. 이 기"
"능이 켜졌을 때 일반적으로 OS의 디스크 입출력(I/O)의 부담이 30-50% 감소하게 됩"
"니다.  많은 시스템에서, 이 옵션은 또한 어디에라도 5-50% 의 전송량을 증가하게 "
"합니다. 하지만 어떤 장치는 (대부분의 유명한 WD Caviar 시리즈)는 다중 모드가 "
"켜졌을때 실행이 더 느려지는 것 처럼 보입니다. 당신에게의 유용성은 여러가지 "
"일 것 입니다. 대부분의 장치는 2, 4, 8 또는 16섹터 가운데 적은 셋팅을 지원할 "
"것 입니다. 더 큰 셋팅도 가능하지만, 그것은 어디까지나 장치에 달려있습니다. "
"16 또는 32로 설정하는게 많은 시스템에서 최적인것 같습니다. Western Digital "
"은 많은 그 회사의 장치에게 4 또는 8 정도의 적은 셋팅을 하기를 권하고 있습니"
"다. 그것은 적은 (32kB) 장치 버퍼와 최적화 되지 못한 버퍼 알고리즘 때문입니"
"다.  B<-i> 옵션은 인스톨된 장치의 최대로 가능한 설정 값을 알려 줄 것 입니"
"다.  (출력물의 MaxMultSect 부분을 보시길 바랍니다.) 어떤 장치들은 다중 모드"
"를 가능하게 해달라고 주장하는것 같지만, 어떠한 셋팅에서 데이터를 잃어버리게 "
"됩니다. 이런 드문 상황에서 , 그런 실패는 크게 파일시스템을 손상시키는 결과가 "
"됩니다."

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<--make-bad-sector>"
msgstr "I<--make-bad-sector>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"Deliberately create a bad sector (aka. \"media error\") on the disk.  "
"B<EXCEPTIONALLY DANGEROUS. DO NOT USE THIS OPTION!!> This can be useful for "
"testing of device/RAID error recovery mechanisms.  The sector number is "
"given as a (base10) parameter after the option.  Depending on the device, "
"hdparm will choose one of two possible ATA commands for corrupting the "
"sector.  The WRITE_LONG works on most drives, but only up to the 28-bit "
"sector boundary.  Some very recent drives (2008) may support the new "
"WRITE_UNCORRECTABLE_EXT command, which works for any LBA48 sector.  If "
"available, hdparm will use that in preference to WRITE_LONG.  The "
"WRITE_UNCORRECTABLE_EXT command itself presents a choice of how the new bad "
"sector should behave.  By default, it will look like any other bad sector, "
"and the drive may take some time to retry and fail on subsequent READs of "
"the sector.  However, if a single letter B<f> is prepended immediately in "
"front of the first digit of the sector number parameter, then hdparm will "
"issue a \"flagged\" WRITE_UNCORRECTABLE_EXT, which causes the drive to "
"merely flag the sector as bad (rather than genuinely corrupt it), and "
"subsequent READs of the sector will fail immediately (rather than after "
"several retries).  Note also that the B<--repair-sector> option can be used "
"to restore (any) bad sectors when they are no longer needed, including "
"sectors that were genuinely bad (the drive will likely remap those to a "
"fresh area on the media)."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-M>"
msgstr "I<-M>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"Get/set Automatic Acoustic Management (AAM) setting. Most modern harddisk "
"drives have the ability to speed down the head movements to reduce their "
"noise output.  The possible values are between 0 and 254. 128 is the most "
"quiet (and therefore slowest) setting and 254 the fastest (and loudest). "
"Some drives have only two levels (quiet / fast), while others may have "
"different levels between 128 and 254.  At the moment, most drives only "
"support 3 options, off, quiet, and fast.  These have been assigned the "
"values 0, 128, and 254 at present, respectively, but integer space has been "
"incorporated for future expansion, should this change."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-n>"
msgstr "I<-n>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"Get or set the \"ignore_write_errors\" flag in the driver.  Do NOT play with "
"this without grokking the driver source code first."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-N>"
msgstr "I<-N>"

#. type: Plain text
#: archlinux fedora-40 fedora-rawhide mageia-cauldron opensuse-leap-15-6
#: opensuse-tumbleweed
msgid ""
"Get/set max visible number of sectors, also known as the B<Host Protected "
"Area> setting.  Without a parameter, B<-N> displays the current setting, "
"which is reported as two values: the first gives the current max sectors "
"setting, and the second shows the native (real) hardware limit for the "
"disk.  The difference between these two values indicates how many sectors of "
"the disk are currently hidden from the operating system, in the form of a "
"B<Host Protected Area (HPA).> This area is often used by computer makers to "
"hold diagnostic software, and/or a copy of the originally provided operating "
"system for recovery purposes.  Another possible use is to hide the true "
"capacity of a very large disk from a BIOS/system that cannot normally cope "
"with drives of that size (eg. most current {2010} BIOSs cannot deal with "
"drives larger than 2TB, so an HPA could be used to cause a 3TB drive to "
"report itself as a 2TB drive).  To change the current max (VERY DANGEROUS, "
"DATA LOSS IS EXTREMELY LIKELY), a new value should be provided (in base10) "
"immediately following the B<-N> option.  This value is specified as a count "
"of sectors, rather than the \"max sector address\" of the drive.  Drives "
"have the concept of a temporary (volatile) setting which is lost on the next "
"hardware reset, as well as a more permanent (non-volatile)  value which "
"survives resets and power cycles.  By default, B<-N> affects only the "
"temporary (volatile) setting.  To change the permanent (non-volatile) value, "
"prepend a leading B<p> character immediately before the first digit of the "
"value.  Drives are supposed to allow only a single permanent change per "
"session.  A hardware reset (or power cycle) is required before another "
"permanent B<-N> operation can succeed.  Note that any attempt to set this "
"value may fail if the disk is being accessed by other software at the same "
"time.  This is because setting the value requires a pair of back-to-back "
"drive commands, but there is no way to prevent some other command from being "
"inserted between them by the kernel.  So if it fails initially, just try "
"again.  Kernel support for B<-N> is buggy for many adapter types across many "
"kernel versions, in that an incorrect (too small) max size value is "
"sometimes reported.  As of the 2.6.27 kernel, this does finally seem to be "
"working on most hardware."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<--offset>"
msgstr "I<--offset>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"Offsets to given number of GiB (1024*1024*1024) when performing B<-t> "
"timings of device reads.  Speed changes (about twice) along many mechanical "
"drives.  Usually the maximum is at the beginning, but not always.  Solid-"
"state drives (SSDs) should show similar timings regardless of offset."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-p>"
msgstr "I<-p>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, fuzzy
#| msgid ""
#| "Attempt to reprogram the IDE interface chipset for the specified PIO "
#| "mode, or attempt to auto-tune for the \"best\" PIO mode supported by the "
#| "drive.  This feature is supported in the kernel for only a few \"known\" "
#| "chipsets, and even then the support is iffy at best.  Some IDE chipsets "
#| "are unable to alter the PIO mode for a single drive, in which case this "
#| "flag may cause the PIO mode for I<both> drives to be set.  Many IDE "
#| "chipsets support either fewer or more than the standard six (0 to 5) PIO "
#| "modes, so the exact speed setting that is actually implemented will vary "
#| "by chipset/driver sophistication.  I<Use with extreme caution!> This "
#| "feature includes zero protection for the unwary, and an unsuccessful "
#| "outcome may result in I<severe filesystem corruption!>"
msgid ""
"Attempt to reprogram the IDE interface chipset for the specified PIO mode, "
"or attempt to auto-tune for the \"best\" PIO mode supported by the drive.  "
"This feature is supported in the kernel for only a few \"known\" chipsets, "
"and even then the support is iffy at best.  Some IDE chipsets are unable to "
"alter the PIO mode for a single drive, in which case this option may cause "
"the PIO mode for I<both> drives to be set.  Many IDE chipsets support either "
"fewer or more than the standard six (0 to 5) PIO modes, so the exact speed "
"setting that is actually implemented will vary by chipset/driver "
"sophistication.  I<Use with extreme caution!> This feature includes zero "
"protection for the unwary, and an unsuccessful outcome may result in "
"I<severe filesystem corruption!>"
msgstr ""
"IDE 인터페이스 칩셋을 구체적 PIO 모드로 다시 프로그램하는 것을 시도하거나 장"
"치에 맞는 \"최상의\" PIO 모드로 자동적으로 설정하는 것을 시도합니다. 이 기능"
"은 커널에서 지원되는 잘 알려진 몇몇의 칩셋에서 지원되며 그 경우라도 기껏해야 "
"불확실합니다. 어떤 IDE 칩셋은 단일 드라이브에 대해 PIO 모드를 변경하는것이 불"
"가능 합니다. 이 경우에 이 옵션은 아마도 I<양쪽의> 드라이브의 PIO 모드를 바꾸"
"게 될 것 입니다. 많은 IDE 칩셋은 기본 6가지 (0에서 5) PIO 모드보다 적거나 많"
"을 것 입니다. 그래서 정확한 속도 셋팅은 실제로 수행함에 있어 칩셋/드라이버에 "
"의해 여러가지로 복잡합니다.  I<사용할때 매우 조심하십시오!> 이 기능은 부주의"
"함 때문에 zero protection 을 포함하고 있고 비성공적인 결과물은 아마도 I<심한 "
"파일시스템의 손상> 이 있을 것 입니다."

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-P>"
msgstr "I<-P>"

#. type: Plain text
#: archlinux fedora-40 fedora-rawhide mageia-cauldron opensuse-leap-15-6
#: opensuse-tumbleweed
#, fuzzy
#| msgid ""
#| "Set the maximum sector count for the drive's internal prefetch "
#| "mechanism.  Not all drives support this feature."
msgid ""
"Set the maximum sector count for the drive\\'s internal prefetch mechanism.  "
"Not all drives support this feature, and it was dropped from the official "
"spec as of ATA-4."
msgstr ""
"장치의 내부적인 선전달(prefetch) 구조를 위한 최대 섹터 수를 설정합니다. 모든 "
"장치가 이 기능을 지원하는 것은 아닙니다."

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<--prefer-ata12>"
msgstr "I<--prefer-ata12>"

#. type: Plain text
#: archlinux fedora-40 fedora-rawhide mageia-cauldron opensuse-leap-15-6
#: opensuse-tumbleweed
msgid ""
"When using the SAT (SCSI ATA Translation) protocol, hdparm normally prefers "
"to use the 16-byte command format whenever possible.  But some USB drive "
"enclosures don't work correctly with 16-byte commands.  This option can be "
"used to force use of the smaller 12-byte command format with such drives.  "
"hdparm will still revert to 16-byte commands for things that cannot be done "
"with the 12-byte format (e.g. sector accesses beyond 28-bits)."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-q>"
msgstr "I<-q>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, fuzzy
#| msgid ""
#| "Handle the next flag quietly, supressing normal output.  This is useful "
#| "for reducing screen clutter when running from /etc/rc.c/rc.local.  Not "
#| "applicable to the I<-i> or I<-v> or I<-t> or I<-T> flags."
msgid ""
"Handle the next option quietly, suppressing normal output (but not error "
"messages).  This is useful for reducing screen clutter when running from "
"system startup scripts.  Not applicable to the B<-i> or B<-v> or B<-t> or B<-"
"T> options."
msgstr ""
"이어지는 옵션을 화면에는 출력하지 않습니다. 이것은 /etc/rc.d/rc.local 에서 실"
"행될 때 화면의 출력을 줄여서 유용합니다. 이것은 I<-i> 옵션 I<-v> 옵션 I<-t> "
"옵션 I<-T> 옵션에는 적용되지 않습니다."

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-Q>"
msgstr "I<-Q>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"Get or set the device's command queue_depth, if supported by the hardware.  "
"This only works with 2.6.xx (or later) kernels, and only with device and "
"driver combinations which support changing the queue_depth.  For SATA disks, "
"this is the Native Command Queuing (NCQ) queue depth."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-r>"
msgstr "I<-r>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, fuzzy
#| msgid ""
#| "Get/set read-only flag for device.  When set, write operations are not "
#| "permitted on the device."
msgid ""
"Get/set read-only flag for the device.  When set, Linux disallows write "
"operations on the device."
msgstr ""
"장치의 읽기 전용(read-only)을 설정하거나 정보를 얻습니다. 설정할때, 이 장치"
"의 쓰기는 허가되지 않습니다."

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-R>"
msgstr "I<-R>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"Get/set Write-Read-Verify feature, if the drive supports it.  Usage: B<-R0> "
"(disable) or B<-R1> (enable).  This feature is intended to have the drive "
"firmware automatically read-back any data that is written by software, to "
"verify that the data was successfully written.  This is generally overkill, "
"and can slow down disk writes by as much as a factor of two (or more)."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<--read-sector>"
msgstr "I<--read-sector>"

#. type: Plain text
#: archlinux fedora-40 fedora-rawhide mageia-cauldron opensuse-leap-15-6
#: opensuse-tumbleweed
msgid ""
"Reads from the specified sector number, and dumps the contents in hex to "
"standard output.  The sector number must be given (base10) after this "
"option.  hdparm will issue a low-level read (completely bypassing the usual "
"block layer read/write mechanisms)  for the specified sector.  This can be "
"used to definitively check whether a given sector is bad (media error) or "
"not (doing so through the usual mechanisms can sometimes give false "
"positives)."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<--repair-sector>"
msgstr "I<--repair-sector>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid "This is an alias for the B<--write-sector> option.  VERY DANGEROUS."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-s>"
msgstr "I<-s>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"Enable/disable the power-on in standby feature, if supported by the drive.  "
"B<VERY DANGEROUS.> Do not use unless you are absolutely certain that both "
"the system BIOS (or firmware) and the operating system kernel (Linux E<gt>= "
"2.6.22) support probing for drives that use this feature.  When enabled, the "
"drive is powered-up in the B<standby> mode to allow the controller to "
"sequence the spin-up of devices, reducing the instantaneous current draw "
"burden when many drives share a power supply.  Primarily for use in large "
"RAID setups.  This feature is usually disabled and the drive is powered-up "
"in the B<active> mode (see -C above).  Note that a drive may also allow "
"enabling this feature by a jumper.  Some SATA drives support the control of "
"this feature by pin 11 of the SATA power connector. In these cases, this "
"command may be unsupported or may have no effect."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-S>"
msgstr "I<-S>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, fuzzy
#| msgid ""
#| "Set the standby (spindown) timeout for the drive.  This value is used by "
#| "the drive to determine how long to wait (with no disk activity) before "
#| "turning off the spindle motor to save power.  Under such circumstances, "
#| "the drive may take as long as 30 seconds to respond to a subsequent disk "
#| "access, though most drives are much quicker.  The encoding of the timeout "
#| "value is somewhat peculiar.  A value of zero means \"off\".  Values from "
#| "1 to 240 specify multiples of 5 seconds, for timeouts from 5 seconds to "
#| "20 minutes.  Values from 241 to 251 specify from 1 to 11 units of 30 "
#| "minutes, for timeouts from 30 minutes to 5.5 hours.  A value of 252 "
#| "signifies a timeout of 21 minutes, 253 sets a vendor-defined timeout, and "
#| "255 is interpreted as 21 minutes plus 15 seconds."
msgid ""
"Put the drive into idle (low-power) mode, and also set the standby "
"(spindown) timeout for the drive.  This timeout value is used by the drive "
"to determine how long to wait (with no disk activity)  before turning off "
"the spindle motor to save power.  Under such circumstances, the drive may "
"take as long as 30 seconds to respond to a subsequent disk access, though "
"most drives are much quicker.  The encoding of the timeout value is somewhat "
"peculiar.  A value of zero means \"timeouts are disabled\": the device will "
"not automatically enter standby mode.  Values from 1 to 240 specify "
"multiples of 5 seconds, yielding timeouts from 5 seconds to 20 minutes.  "
"Values from 241 to 251 specify from 1 to 11 units of 30 minutes, yielding "
"timeouts from 30 minutes to 5.5 hours.  A value of 252 signifies a timeout "
"of 21 minutes. A value of 253 sets a vendor-defined timeout period between 8 "
"and 12 hours, and the value 254 is reserved.  255 is interpreted as 21 "
"minutes plus 15 seconds.  Note that some older drives may have very "
"different interpretations of these values."
msgstr ""
"드라이브의 standby (spindown) 시간을 설정합니다. 이 수치는 드라이브에게 전원 "
"절약을 위해 스핀들 모터를 멈출때 까지 얼마나 기다릴 것인가(어떠한 디스크 활동"
"없이)를 결정하게 됩니다. 이런 상황에서 드라이브는 연속되는 디스크 접근에 반응"
"하기 위해 30초정도 걸릴 것 이지만 대부분의 드라이브는 더 빠릅니다. timeout 수"
"치는 좀 특이합니다.  이 수치가 0 일때는 이 옵션을 끕니다. 수치가 1 에서 240 "
"일때 수치당 5초의 시간을 가집니다. 따라서 이 때는 5초에서 20분 사이가 됩니"
"다.  수치가 241 에서 251 일때는 수치 1 당 30분의 시간을 가집니다. 따라서 이 "
"때는 30분에서 5.5 시간이 됩니다. 252는 21분의 timeout 을 의미하고 253은 제작"
"사에서 정의된 timeout 입니다. 그리고 255는 21분 15초가 됩니다."

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<--set-sector-size>"
msgstr "I<--set-sector-size>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"For drives which support reconfiguring of the Logical Sector Size, this flag "
"can be used to specify the new desired sector size in bytes.  B<VERY "
"DANGEROUS. This most likely will scramble all data on the drive.> The "
"specified size must be one of 512, 520, 528, 4096, 4160, or 4224.  Very few "
"drives support values other than 512 and 4096.  Eg.  B<hdparm --set-sector-"
"size 4096 /dev/sdb>"
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-t>"
msgstr "I<-t>"

#. type: Plain text
#: archlinux fedora-40 fedora-rawhide mageia-cauldron opensuse-leap-15-6
#: opensuse-tumbleweed
msgid ""
"Perform timings of device reads for benchmark and comparison purposes.  For "
"meaningful results, this operation should be repeated 2-3 times on an "
"otherwise inactive system (no other active processes) with at least a couple "
"of megabytes of free memory.  This displays the speed of reading through the "
"buffer cache to the disk without any prior caching of data.  This "
"measurement is an indication of how fast the drive can sustain sequential "
"data reads under Linux, without any filesystem overhead.  To ensure accurate "
"measurements, the buffer cache is flushed during the processing of I<-t> "
"using the BLKFLSBUF ioctl."
msgstr ""
"비교를 목적으로 벤치마크를 위해 장치를 읽는 시간을 잽니다. 정확한 결과를 위"
"해 이것을 적어도 수 메가 바이트의 메모리 자원이 남은 상태의 사용하지 않는 시"
"스템(실행중인 다른 프로세스가 없는)에서 2-3번 정도 반복해서 수행합니다. 이 옵"
"션은 어떠한 사전의 캐쉬가 되지 않은 데이터를 디스크에서 버퍼 캐쉬를 통해 읽"
"는 속도를 표시합니다. 이 측정법은 리눅스에서 파일시스템의 어떠한 부담을 주지"
"않고 얼마나 빠르게 드라이브가 연속되는 데이터를 지속적으로 읽을수 있는지의 표"
"시입니다.  정확한 측정법을 확실히 하기 위해서는, BLKFLSBUF ioctl 를 사용하여 "
"I<-t> 가 수행되는 동안 버퍼 캐쉬가 비워져야 합니다."

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-T>"
msgstr "I<-T>"

#. type: Plain text
#: archlinux fedora-40 fedora-rawhide mageia-cauldron opensuse-leap-15-6
#: opensuse-tumbleweed
#, fuzzy
#| msgid ""
#| "Perform timings of cache reads for benchmark and comparison purposes.  "
#| "For meaningful results, this operation should be repeated 2-3 times on an "
#| "otherwise inactive system (no other active processes) with at least a "
#| "couple of megabytes of free memory.  This displays the speed of reading "
#| "directly from the Linux buffer cache without disk access.  This "
#| "measurement is essentially an indication of the throughput of the "
#| "processor, cache, and memory of the system under test.  If the I<-t> flag "
#| "is also specified, then a correction factor based on the outcome of I<-T> "
#| "will be incorporated into the result reported for the I<-t> operation."
msgid ""
"Perform timings of cache reads for benchmark and comparison purposes.  For "
"meaningful results, this operation should be repeated 2-3 times on an "
"otherwise inactive system (no other active processes) with at least a couple "
"of megabytes of free memory.  This displays the speed of reading directly "
"from the Linux buffer cache without disk access.  This measurement is "
"essentially an indication of the throughput of the processor, cache, and "
"memory of the system under test."
msgstr ""
"비교를 목적으로 벤치마크를 위해 캐쉬를 읽는 시간을 잽니다. 정확한 결과를 위"
"해 이것을 적어도 수 메가 바이트의 메모리 자원이 남은 상태의 사용하지 않는 시"
"스템(실행중인 다른 프로세스가 없는)에서 2-3번 정도 반복해서 수행합니다. 이 옵"
"션은 디스크 접근(access)없이 리눅스 버퍼 캐쉬로 부터 직접적으로 읽어오는 속도"
"를 표시해줍니다. 이 측정법은 본래 테스트 상태의 시스템의 프로세서, 캐쉬, 메모"
"리의 결과물의 표시입니다."

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<--trim-sector-ranges>"
msgstr "I<--trim-sector-ranges>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"For Solid State Drives (SSDs).  B<EXCEPTIONALLY DANGEROUS. DO NOT USE THIS "
"OPTION!!> Tells the drive firmware to discard unneeded data sectors, "
"destroying any data that may have been present within them.  This makes "
"those sectors available for immediate use by the firmware's garbage "
"collection mechanism, to improve scheduling for wear-leveling of the flash "
"media.  This option expects one or more sector range pairs immediately after "
"the option: an LBA starting address, a colon, and a sector count (max "
"65535), with no intervening spaces.  B<EXCEPTIONALLY DANGEROUS. DO NOT USE "
"THIS OPTION!!>"
msgstr ""

#. type: Plain text
#: archlinux fedora-40 fedora-rawhide mageia-cauldron opensuse-leap-15-6
#: opensuse-tumbleweed
msgid "E.g.  B<hdparm --trim-sector-ranges 1000:4 7894:16 /dev/sdz>"
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<--trim-sector-ranges-stdin>"
msgstr "I<--trim-sector-ranges-stdin>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"Identical to B<--trim-sector-ranges> above, except the list of lba:count "
"pairs is read from stdin rather than being specified on the command line.  "
"This can be used to avoid problems with excessively long command lines.  It "
"also permits batching of many more sector ranges into single commands to the "
"drive, up to the currently configured transfer limit (max_sectors_kb)."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-u>"
msgstr "I<-u>"

#. type: Plain text
#: archlinux fedora-40 fedora-rawhide mageia-cauldron opensuse-leap-15-6
#: opensuse-tumbleweed
msgid ""
"Get/set the interrupt-unmask flag for the drive.  A setting of B<1> permits "
"the driver to unmask other interrupts during processing of a disk interrupt, "
"which greatly improves Linux\\'s responsiveness and eliminates \"serial port "
"overrun\" errors.  B<Use this feature with caution:> some drive/controller "
"combinations do not tolerate the increased I/O latencies possible when this "
"feature is enabled, resulting in B<massive filesystem corruption.> In "
"particular, B<CMD-640B> and B<RZ1000> (E)IDE interfaces can be B<unreliable> "
"(due to a hardware flaw) when this option is used with kernel versions "
"earlier than 2.0.13.  Disabling the B<IDE prefetch> feature of these "
"interfaces (usually a BIOS/CMOS setting)  provides a safe fix for the "
"problem for use with earlier kernels."
msgstr ""
"장치의 interrupt-unmask 를 설정하거나 정보를 얻습니다. 이 옵션을 B<1> 로 설정"
"할 경우 장치에게 디스크의 인터럽트가 진행되는 동안 다른 인터럽트를 unmask 하"
"도록 허락합니다. 이것은 리눅스의 반응성을 크게 증가시키고 \"serial port "
"overrun\" 에러를 제거합니다.  B<이 기능을 사용할때는 주의하십시오:> 어떤 드라"
"이브/콘트롤러 조합은 이 기능이 켜졌을때(enable) 입출력(I/O)  대기시간이 증가"
"하는 것에 관대하지 않을수 있습니다. 결과적으로 B<파일시스템을 크게 손상시킵니"
"다.> 특별히 B<CMD-640B> 와 B<RZ1000> (E)IDE 인터페이스는 커널 2.0.13 이전 버"
"젼에서는 이 옵션이 사용될 때 B<신뢰할수 없습니다.> (하드웨어 결함 때문)  이"
"전 버젼의 커널을 사용 할때 이런 문제를 고치기 위해서는 B<IDE prefetch> 기능"
"을 이런 인터페이스 에서 꺼 주시길 바랍니다.(대개 BIOS/CMOS 셋팅)  (대개 BIOS/"
"CMOS 셋팅)"

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-v>"
msgstr "I<-v>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, fuzzy
#| msgid ""
#| "Display all settings, except -i (same as -acdgkmnru for IDE, -gr for SCSI "
#| "or -adgr for XT).  This is also the default behaviour when no flags are "
#| "specified."
msgid ""
"Display some basic settings, similar to -acdgkmur for IDE.  This is also the "
"default behaviour when no options are specified."
msgstr ""
"-i 옵션을 제외하고 모든 셋팅을 표시합니다.( IDE 에서는 -acdgkmnru , SCSI 에서"
"는 -gr , XT 에서는 -adgr 과 같습니다.) 또한 이것은 특별히 어떠한 옵션도 주지 "
"않았을때 기본 동작입니다."

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-V>"
msgstr "I<-V>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid "Display program version and exit immediately."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<--verbose>"
msgstr "I<--verbose>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid "Display extra diagnostics from some commands."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-w>"
msgstr "I<-w>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"Perform a device reset B<(DANGEROUS).> Do NOT use this option.  It exists "
"for unlikely situations where a reboot might otherwise be required to get a "
"confused drive back into a useable state."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<--write-sector>"
msgstr "I<--write-sector>"

#. type: Plain text
#: archlinux fedora-40 fedora-rawhide mageia-cauldron opensuse-leap-15-6
#: opensuse-tumbleweed
msgid ""
"Writes zeros to the specified sector number.  VERY DANGEROUS.  The sector "
"number must be given (base10) after this option.  hdparm will issue a low-"
"level write (completely bypassing the usual block layer read/write "
"mechanisms)  to the specified sector.  This can be used to force a drive to "
"repair a bad sector (media error)."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-W>"
msgstr "I<-W>"

#. type: Plain text
#: archlinux fedora-40 fedora-rawhide mageia-cauldron opensuse-leap-15-6
#: opensuse-tumbleweed
#, fuzzy
#| msgid ""
#| "Disable/enable the IDE drive's write-caching feature (usually OFF by "
#| "default)."
msgid "Get/set the IDE/SATA drive\\'s write-caching feature."
msgstr ""
"IDE 드라이브의 쓰기-캐쉬(write-caching) 기능을 끄거나 켭니다.( 대개 기본적으"
"로 꺼져(OFF) 있습니다.)"

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-X>"
msgstr "I<-X>"

#. type: Plain text
#: archlinux fedora-40 fedora-rawhide mageia-cauldron opensuse-leap-15-6
#: opensuse-tumbleweed
#, fuzzy
#| msgid ""
#| "Set the IDE transfer mode for newer (E)IDE/ATA2 drives.  This is "
#| "typically used in combination with I<-d1> when enabling DMA to/from a "
#| "drive on a supported interface chipset (such as the Intel 430FX Triton), "
#| "where I<-X34> is used to select multiword DMA mode2 transfers.  With "
#| "systems which support UltraDMA burst timings, I<-X66> is used to select "
#| "UltraDMA mode2 transfers (you'll need to prepare the chipset for UltraDMA "
#| "beforehand).  Apart from that, use of this flag is I<seldom necessary> "
#| "since most/all modern IDE drives default to their fastest PIO transfer "
#| "mode at power-on.  Fiddling with this can be both needless and risky.  On "
#| "drives which support alternate transfer modes, I<-X> can be used to "
#| "switch the mode of the drive I<only.> Prior to changing the transfer "
#| "mode, the IDE interface should be jumpered or programmed (see I<-p> "
#| "flag)  for the new mode setting to prevent loss and/or corruption of "
#| "data.  I<Use this with extreme caution!> For the PIO (Programmed Input/"
#| "Output)  transfer modes used by Linux, this value is simply the desired "
#| "PIO mode number plus 8.  Thus, a value of 09 sets PIO mode1, 10 enables "
#| "PIO mode2, and 11 selects PIO mode3.  Setting 00 restores the drive's "
#| "\"default\" PIO mode, and 01 disables IORDY.  For multiword DMA, the "
#| "value used is the desired DMA mode number plus 32.  for UltraDMA, the "
#| "value is the desired UltraDMA mode number plus 64."
msgid ""
"Set the IDE transfer mode for (E)IDE/ATA drives.  This is typically used in "
"combination with B<-d1> when enabling DMA to/from a drive on a supported "
"interface chipset, where B<-X mdma2> is used to select multiword DMA mode2 "
"transfers and B<-X sdma1> is used to select simple mode 1 DMA transfers.  "
"With systems which support UltraDMA burst timings, B<-X udma2> is used to "
"select UltraDMA mode2 transfers (you\\'ll need to prepare the chipset for "
"UltraDMA beforehand).  Apart from that, use of this option is B<seldom "
"necessary> since most/all modern IDE drives default to their fastest PIO "
"transfer mode at power-on.  Fiddling with this can be both needless and "
"risky.  On drives which support alternate transfer modes, B<-X> can be used "
"to switch the mode of the drive B<only.> Prior to changing the transfer "
"mode, the IDE interface should be jumpered or programmed (see B<-p> option)  "
"for the new mode setting to prevent loss and/or corruption of data.  I<Use "
"this with extreme caution!> For the PIO (Programmed Input/Output)  transfer "
"modes used by Linux, this value is simply the desired PIO mode number plus "
"8.  Thus, a value of 09 sets PIO mode1, 10 enables PIO mode2, and 11 selects "
"PIO mode3.  Setting 00 restores the drive\\'s \"default\" PIO mode, and 01 "
"disables IORDY.  For multiword DMA, the value used is the desired DMA mode "
"number plus 32.  for UltraDMA, the value is the desired UltraDMA mode number "
"plus 64."
msgstr ""
"새로운 (E)IDE/ATA2 드라이브를 위해 IDE 전송 모드를 설정합니다. 이 옵션은 기본"
"적으로 I<d1> 옵션과 같이 쓰이며 이것은 지원되는 인터페이스 칩셋 ( Intel "
"430FX Triton 같은 ) 에서 드라이브 에게/에서 DMA 를 켜며, 이러한 칩셋은 I<-"
"X34> 옵션이 multiword DMA mode2 전송을 사용하기 위해 쓰입니다. Ultra DMA 을 "
"지원하는 시스템에서는, I<-X66> 옵션이 UltraDMA mode2 전송을 사용하기 위해 쓰"
"입니다.( 당신은 UltraDMA 칩셋을 사용하기 위해 준비가 필요합니다.) 위에 것은 "
"그렇다 하고, 거의 모든 지금의 IDE 드라이브가 전원을 킬 때 부터 가장 빠른 PIO "
"전송모드를 기본으로 하기 때문에 이 옵션의 사용은 I<좀처럼 필요하지 않습니다."
"> 무의미한 이것은 필요하지 않을수도 위험할수도 있습니다. 양쪽 모두의 전송 모"
"드를 지원하는 드라이브에서는 I<-X> 는 I<단지> 전송 모드를 바꾸는데 사용됩니"
"다. 데이터의 손실이나 손상을 막기위해 전송모드를 바꾸기 전에 IDE 인터페이스"
"는 점퍼가 설정되거나 프로그램 되어있어야 합니다.( I<-p> 옵션을 보자).  I<이 "
"옵션을 사용할때는 극히 주의하길 바랍니다!> PIO(Programmed Input/Output) 전송 "
"모드는 리눅스에서 사용되고, 이 수치는 간단하게 원하는 PIO 모드 번호에서 8 을 "
"더한 값입니다.  그래서 09 값은 PIO 모드1로 설정되고 10은 PIO 모드2로 설정되"
"며 11 은 PIO 모드3 입니다. 00 값으로 설정하면 드라이브의 \"기본\" PIO 모드로 "
"설정됩니다. 그리고 01은 IORDY 를 끕니다. multiword DMA 에서는 원하는 DMA 모드"
"에 32를 더한 값이 사용됩니다. 그리고 UltraDMA 에서는 원하는 UltraDMA 모드에 "
"64 를 더한 값이 사용됩니다."

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-y>"
msgstr "I<-y>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, fuzzy
#| msgid ""
#| "Force an IDE drive to immediately enter the low power consumption "
#| "B<standby> mode, usually causing it to spin down.  The current power mode "
#| "status can be checked using the B<-C> flag."
msgid ""
"Force an IDE drive to immediately enter the low power consumption B<standby> "
"mode, usually causing it to spin down.  The current power mode status can be "
"checked using the B<-C> option."
msgstr ""
"강제로 IDE 드라이브를 신속히 저 전력 소모의 B<standby> 모드로 들어가게 합니"
"다. 대개는 스핀들 모터를 멈추게 합니다. 현재 전원 모드 상태는 B<-C> 옵션에서 "
"체크할 수 있습니다."

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-Y>"
msgstr "I<-Y>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, fuzzy
#| msgid ""
#| "Force an IDE drive to immediately enter the lowest power consumption "
#| "B<sleep> mode, causing it to shut down completely.  A hard or soft reset "
#| "is required before the drive can be accessed again (the Linux IDE driver "
#| "will automatically handle issuing a reset if/when needed).  The current "
#| "power mode status can be checked using the B<-C> flag."
msgid ""
"Force an IDE drive to immediately enter the lowest power consumption "
"B<sleep> mode, causing it to shut down completely.  A hard or soft reset is "
"required before the drive can be accessed again (the Linux IDE driver will "
"automatically handle issuing a reset if/when needed).  The current power "
"mode status can be checked using the B<-C> option."
msgstr ""
"강제로 IDE 드라이브를 신속히 가장 적은 전력을 소모하는 B<sleep> 모드로 들어갑"
"니다. 완전히 shut down을 합니다. 드라이브가 다시 접근(access)할수 있으려면 하"
"드 혹은 소프트 리셋이 필요합니다.( 리눅스 IDE 드라이버는 필요할 때 자동적으"
"로 리셋을 조절합니다.)  현재 전원 모드 상태는 B<-C> 옵션에서 체크할 수 있습니"
"다."

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-z>"
msgstr "I<-z>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"Force a kernel re-read of the partition table of the specified device(s)."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<-Z>"
msgstr "I<-Z>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, fuzzy
msgid ""
"Disable the automatic power-saving function of certain Seagate drives "
"(ST3xxx models?), to prevent them from idling/spinning-down at inconvenient "
"times."
msgstr ""
"불편한 시간에 idle/spin-down 을 막기위해 Seagate 드라이브의 자동 전력-보호 기"
"능을 끕니다. (ST3xxx 모델?)"

#. type: SH
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "ATA Security Feature Set"
msgstr ""

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"These switches are B<DANGEROUS> to experiment with, and might not work with "
"some kernels.  B<USE AT YOUR OWN RISK.>"
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<--security-help>"
msgstr "I<--security-help>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, fuzzy
#| msgid "Display terse usage information (help)."
msgid "Display terse usage info for all of the --security-* options."
msgstr "사용 방법을 간결하게 표시합니다. (help)"

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<--security-freeze>"
msgstr "I<--security-freeze>"

#. type: Plain text
#: archlinux fedora-40 fedora-rawhide mageia-cauldron opensuse-leap-15-6
#: opensuse-tumbleweed
msgid ""
"Freeze the drive\\'s security settings.  The drive does not accept any "
"security commands until next power-on reset.  Use this function in "
"combination with --security-unlock to protect drive from any attempt to set "
"a new password. Can be used standalone, too.  No other options are permitted "
"on the command line with this one."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<--security-prompt-for-password>"
msgstr "I<--security-prompt-for-password>"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"Prompt for the --security PWD rather than getting from the command line "
"args.  This avoids having passwords show up in shell history or in /proc/"
"self/cmdline during execution."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<--security-unlock PWD>"
msgstr ""

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"Unlock the drive, using password PWD.  Password is given as an ASCII string "
"and is padded with NULs to reach 32 bytes.  The applicable drive password is "
"selected with the --user-master switch (default is \"user\" password).  No "
"other options are permitted on the command line with this one."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<--security-set-pass PWD>"
msgstr ""

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"Lock the drive, using password PWD (Set Password)  B<(DANGEROUS).> Password "
"is given as an ASCII string and is padded with NULs to reach 32 bytes.  Use "
"the special password B<NULL> to set an empty password.  The applicable drive "
"password is selected with the --user-master switch (default is \"user\" "
"password)  and the applicable security mode with the --security-mode "
"switch.  No other options are permitted on the command line with this one."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<--security-disable PWD>"
msgstr ""

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"Disable drive locking, using password PWD.  Password is given as an ASCII "
"string and is padded with NULs to reach 32 bytes.  The applicable drive "
"password is selected with the --user-master switch (default is \"user\" "
"password).  No other options are permitted on the command line with this one."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<--security-erase PWD>"
msgstr ""

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"Erase (locked) drive, using password PWD B<(DANGEROUS).> Password is given "
"as an ASCII string and is padded with NULs to reach 32 bytes.  Use the "
"special password B<NULL> to represent an empty password.  The applicable "
"drive password is selected with the --user-master switch (default is "
"\"user\" password).  No other options are permitted on the command line with "
"this one."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<--security-erase-enhanced PWD>"
msgstr ""

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"Enhanced erase (locked) drive, using password PWD B<(DANGEROUS).> Password "
"is given as an ASCII string and is padded with NULs to reach 32 bytes.  The "
"applicable drive password is selected with the --user-master switch (default "
"is \"user\" password).  No other options are permitted on the command line "
"with this one."
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<--user-master USER>"
msgstr ""

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid ""
"Specifies which password (user/master) to select.\n"
"B<Defaults to user password.>\n"
"Only useful in combination with --security-unlock, --security-set-pass,\n"
"--security-disable, --security-erase or --security-erase-enhanced.\n"
"        u       user password\n"
"        m       master password\n"
msgstr ""

#. type: TP
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "I<--security-mode MODE>"
msgstr ""

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid ""
"Specifies which security mode (high/maximum) to set.\n"
"B<Defaults to high.>\n"
"Only useful in combination with --security-set-pass.\n"
"        h       high security\n"
"        m       maximum security\n"
msgstr ""

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"B<THIS FEATURE IS EXPERIMENTAL AND NOT WELL TESTED. USE AT YOUR OWN RISK.>"
msgstr ""

#. type: SH
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "FILES"
msgstr "파일"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid "/etc/hdparm.conf"
msgstr "/etc/hdparm.conf"

#. type: SH
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "BUGS"
msgstr "버그"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"As noted above, the B<-m sectcount> and B<-u 1> options should be used with "
"caution at first, preferably on a read-only filesystem.  Most drives work "
"well with these features, but a few drive/controller combinations are not "
"100% compatible.  Filesystem corruption may result.  Backup everything "
"before experimenting!"
msgstr ""
"위에서 말한 것과 같이 B<-m sectcount> 와 B<-u 1> 옵션은 처음에 경고와 함께 사"
"용되야 하는 것이 틀림없습니다. 되도록이면 read-only 파일 시스템에서 사용되어"
"야 합니다. 대부분의 드라이브는 이 기능 들과 잘 동작하지만, 몇몇의 드라이브/콘"
"트롤러 조합은 100% 호환되는 것이 아닙니다. 파일시스템을 손상시킬 수 있습니"
"다. 실험해 보기 전에 모든 것을 백업하십시오!"

#. type: Plain text
#: archlinux fedora-40 fedora-rawhide mageia-cauldron opensuse-leap-15-6
#: opensuse-tumbleweed
msgid ""
"Some options (e.g. -r for SCSI) may not work with old kernels as necessary "
"ioctl()\\'s were not supported."
msgstr ""
"어떤 옵션 (예를 들어 SCSI 에서 -r) 은 필요한 ioctl() 가 오래된 커널에는 없기 "
"때문에 오래된 커널에서 동작하지 않을수도 있습니다."

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"Although this utility is intended primarily for use with SATA/IDE hard disk "
"devices, several of the options are also valid (and permitted) for use with "
"SCSI hard disk devices and MFM/RLL hard disks with XT interfaces."
msgstr ""
"이 유틸리티가 기본적으로 SATA/IDE 하드 디스크 장치에서 사용하고 했지만, 여러"
"가지 옵션이 SCSI 하드 디스크 장치와 XT 인터페이스의 MFM/RLL 하드 디스크에서"
"도 유효하며 동작합니다."

#. type: Plain text
#: archlinux fedora-40 fedora-rawhide mageia-cauldron opensuse-leap-15-6
#: opensuse-tumbleweed
msgid ""
"The Linux kernel up until 2.6.12 (and probably later) doesn\\'t handle the "
"security unlock and disable commands gracefully and will segfault and in "
"some cases even panic. The security commands however might indeed have been "
"executed by the drive. This poor kernel behaviour makes the PIO data "
"security commands rather useless at the moment."
msgstr ""

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"Note that the \"security erase\" and \"security disable\" commands have been "
"implemented as two consecutive PIO data commands and will not succeed on a "
"locked drive because the second command will not be issued after the "
"segfault.  See the code for hints how patch it to work around this problem. "
"Despite the segfault it is often still possible to run two instances of "
"hdparm consecutively and issue the two necessary commands that way."
msgstr ""

#. type: SH
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "AUTHOR"
msgstr "저자"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, fuzzy
#| msgid ""
#| "B<hdparm> has been written by Mark Lord E<lt>mlord@pobox.comE<gt>, the "
#| "primary developer and maintainer of the (E)IDE driver for Linux, with "
#| "suggestions from many netfolk."
msgid ""
"B<hdparm> has been written by Mark Lord E<lt>mlord@pobox.comE<gt>, the "
"original primary developer and maintainer of the (E)IDE driver for Linux, "
"and current contributor to the libata subsystem, along with suggestions and "
"patches from many netfolk."
msgstr ""
"B<hdparm> 은 많은 netfolk 로 부터 제안과 함께 리눅스에서 (E)IDE 드라이버의 주"
"요한 개발자이고, 유지자인 Mark Lord E<lt>mlord@pobox.comE<gt>가 썼습니다."

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"The disable Seagate auto-powersaving code is courtesy of Tomi "
"Leppikangas(tomilepp@paju.oulu.fi)."
msgstr ""
"Seagate 자동 전력 보호 제거 코드는 Tomi Leppikangas(tomilepp@paju.oulu.fi) "
"로 부터 제공을 받았습니다."

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid "Security freeze command by Benjamin Benz, 2005."
msgstr ""

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"PIO data out security commands by Leonard den Ottolander, 2005.  Some other "
"parts by Benjamin Benz and others."
msgstr ""

#. type: SH
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
#, no-wrap
msgid "SEE ALSO"
msgstr "추가 참조"

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid ""
"B<http://www.t13.org/> Technical Committee T13 AT Attachment (ATA/ATAPI) "
"Interface."
msgstr ""

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid "B<http://www.serialata.org/> Serial ATA International Organization."
msgstr ""

#. type: Plain text
#: archlinux debian-bookworm debian-unstable fedora-40 fedora-rawhide
#: mageia-cauldron opensuse-leap-15-6 opensuse-tumbleweed
msgid "B<http://www.compactflash.org/> CompactFlash Association."
msgstr ""

#. type: Plain text
#: debian-bookworm debian-unstable
msgid ""
"B<hdparm> provides a command line interface to various kernel interfaces "
"supported by the Linux SATA/PATA/SAS \"libata\" subsystem and the older IDE "
"driver subsystem.  Many newer (2008 and later)  USB drive enclosures now "
"also support \"SAT\" (SCSI-ATA Command Translation)  and therefore may also "
"work with hdparm.  E.g., recent WD \"Passport\" models and recent NexStar-3 "
"enclosures.  Some options may work correctly only with the latest kernels."
msgstr ""

#. type: Plain text
#: debian-bookworm debian-unstable
msgid ""
"When no options are given, B<-acdgkmur> is assumed.  For \"Get/set\" "
"options, a query without the optional parameter (e.g., -d) will query (get) "
"the device state, and with a parameter (e.g., -d0) will set the device state."
msgstr ""

#. type: Plain text
#: debian-bookworm debian-unstable
#, fuzzy
#| msgid ""
#| "Disable/enable the IDE drive's read-lookahead feature (usually ON by "
#| "default)."
msgid ""
"Get/set the IDE drive's read-lookahead feature (usually ON by default).  "
"Usage: B<-A0> (disable) or B<-A1> (enable)."
msgstr ""
"IDE 장치의 미리 읽기(read-lookahead) 기능을 끄거나 켤수 있습니다.  (대개 기본"
"적으로 기능이 켜져(ON) 있습니다)."

#. type: Plain text
#: debian-bookworm debian-unstable
msgid ""
"Use the kernel's \"O_DIRECT\" flag when performing a B<-t> timing test.  "
"This bypasses the page cache, causing the reads to go directly from the "
"drive into hdparm's buffers, using so-called \"raw\" I/O.  In many cases, "
"this can produce results that appear much faster than the usual page cache "
"method, giving a better indication of raw device and driver performance."
msgstr ""

#. type: Plain text
#: debian-bookworm debian-unstable
msgid ""
"This option currently works only on ext4 and xfs filesystem types.  When "
"used, this must be the only option given.  It requires two parameters: the "
"desired file size in kibibytes (byte count divided by 1024), followed by the "
"pathname for the new file.  It will create a new file of the specified size, "
"but without actually having to write any data to the file.  This will "
"normally complete very quickly, and without thrashing the storage device."
msgstr ""

#. type: Plain text
#: debian-bookworm debian-unstable
msgid "E.g., create a 10\\ kibibyte file: B<hdparm --fallocate 10 temp_file>"
msgstr ""

#. type: Plain text
#: debian-bookworm debian-unstable
msgid ""
"When used, this must be the only option given.  It requires a file path as a "
"parameter, and will print out a list of the block extents (sector ranges)  "
"occupied by that file on disk.  Sector numbers are given as absolute LBA "
"numbers, referenced from sector 0 of the physical device rather than from "
"the partition or filesystem.  This information can then be used for a "
"variety of purposes, such as examining the degree of fragmentation of larger "
"files, or determining appropriate sectors to deliberately corrupt during "
"fault-injection testing procedures."
msgstr ""

#. type: Plain text
#: debian-bookworm debian-unstable
msgid ""
"This option uses the new FIEMAP (file extent map) ioctl() when available, "
"and falls back to the older FIBMAP (file block map) ioctl() otherwise.  Note "
"that FIBMAP suffers from a 32-bit block-number interface, and thus not work "
"beyond 8\\ TB or 16\\ TB.  FIBMAP is also very slow, and does not deal well "
"with preallocated uncommitted extents in ext4/xfs filesystems, unless a "
"sync() is done before using this option."
msgstr ""

#. type: Plain text
#: debian-bookworm debian-unstable
#, fuzzy
#| msgid ""
#| "Set the drive's keep_features_over_reset flag.  Setting this enables the "
#| "drive to retain the settings for I<-APSWXZ> over a soft reset (as done "
#| "during the error recovery sequence).  Not all drives support this feature."
msgid ""
"Set the drive's \"keep_features_over_reset\" flag.  Setting this enables the "
"drive to retain the settings for B<-APSWXZ> over a soft reset (as done "
"during the error recovery sequence).  Not all drives support this feature."
msgstr ""
"리셋에도 특징을 유지하는 옵션(keep_features_over_reset)을 설정합니다.  이 옵"
"션은 장치를 소프트 리셋에도 I<-APSWXZ> 옵션으로 유지시킵니다, (에러 복구 순서"
"동안 끝남으로). 모든 장치가 이것을 지원하는 것은 아닙니다."

#. type: Plain text
#: debian-bookworm debian-unstable
#, fuzzy
#| msgid ""
#| "maintains the door locking mechanism automatically, depending on drive "
#| "usage (locked whenever a filesystem is mounted).  But on system shutdown, "
#| "this can be a nuisance if the root partition is on a removeable disk, "
#| "since the root partition is left mounted (read-only) after shutdown.  So, "
#| "by using this command to unlock the door -b after the root filesystem is "
#| "remounted read-only, one can then remove the cartridge from the drive "
#| "after shutdown."
msgid ""
"Set the drive's doorlock flag.  Setting this to B<1> will lock the door "
"mechanism of some removable hard drives (e.g., Syquest, ZIP, Jazz..), and "
"setting it to B<0> will unlock the door mechanism.  Normally, Linux "
"maintains the door locking mechanism automatically, depending on drive usage "
"(locked whenever a filesystem is mounted).  But on system shutdown, this can "
"be a nuisance if the root partition is on a removable disk, since the root "
"partition is left mounted (read-only) after shutdown.  So, by using this "
"command to unlock the door B<after> the root filesystem is remounted read-"
"only, one can then remove the cartridge from the drive after shutdown."
msgstr ""
"으로 설정하므로써 도어락을 풀 수 있습니다. 일반적으로 리눅스는 디스크 사용에 "
"따라 도어락을 자동적으로 유지합니다.(마운트 되어 있다면 언제든지 도어락이 작"
"동됩니다.) 하지만 시스템의 셧다운시, 만약 루트 파티션이 이동성 장치에 있다면 "
"루트파티션이 셧다운후에도 (read-only상태의)마운트된채로 남아있어 성가실수 있"
"습니다. 그렇기 때문에 셧다운후에 카트리지를 제거할수 있도록 루트 파일시스템"
"이 read-only 상태로 재 마운트 된후 도어락을 풀수 있도록 이 옵션을 사용합니다."

#. type: Plain text
#: debian-bookworm debian-unstable
#, fuzzy
#| msgid ""
#| "Get/set sector count for multiple sector I/O on the drive.  A setting of "
#| "B<0> disables this feature.  Multiple sector mode (aka IDE Block Mode), "
#| "is a feature of most modern IDE hard drives, permitting the transfer of "
#| "multiple sectors per I/O interrupt, rather than the usual one sector per "
#| "interrupt.  When this feature is enabled, it typically reduces operating "
#| "system overhead for disk I/O by 30-50%.  On many systems, it also "
#| "provides increased data throughput of anywhere from 5% to 50%.  Some "
#| "drives, however (most notably the WD Caviar series), seem to run slower "
#| "with multiple mode enabled.  Your mileage may vary.  Most drives support "
#| "the minimum settings of 2, 4, 8, or 16 (sectors).  Larger settings may "
#| "also be possible, depending on the drive.  A setting of 16 or 32 seems "
#| "optimal on many systems.  Western Digital recommends lower settings of 4 "
#| "to 8 on many of their drives, due tiny (32kB) drive buffers and non-"
#| "optimized buffering algorithms.  The B<-i> flag can be used to find the "
#| "maximum setting supported by an installed drive (look for MaxMultSect in "
#| "the output).  Some drives claim to support multiple mode, but lose data "
#| "at some settings.  Under rare circumstances, such failures can result in "
#| "B<massive filesystem corruption.>"
msgid ""
"Get/set sector count for multiple sector I/O on the drive.  A setting of "
"B<0> disables this feature.  Multiple sector mode (aka IDE Block Mode), is a "
"feature of most modern IDE hard drives, permitting the transfer of multiple "
"sectors per I/O interrupt, rather than the usual one sector per interrupt.  "
"When this feature is enabled, it typically reduces operating system overhead "
"for disk I/O by 30\\(en50%.  On many systems, it also provides increased "
"data throughput of anywhere from 5% to 50%.  Some drives, however (most "
"notably the WD Caviar series), seem to run slower with multiple mode "
"enabled.  Your mileage may vary.  Most drives support the minimum settings "
"of 2, 4, 8, or 16 (sectors).  Larger settings may also be possible, "
"depending on the drive.  A setting of 16 or 32 seems optimal on many "
"systems.  Western Digital recommends lower settings of 4 to 8 on many of "
"their drives, due tiny (32 KiB) drive buffers and non-optimized buffering "
"algorithms.  The B<-i> option can be used to find the maximum setting "
"supported by an installed drive (look for MaxMultSect in the output).  Some "
"drives claim to support multiple mode, but lose data at some settings.  "
"Under rare circumstances, such failures can result in B<massive filesystem "
"corruption.>"
msgstr ""
"장치의 다중 섹터 입출력(I/O)을 위해 섹터 수를 설정하거나 정보를 알아냅니다. "
"이 옵션을 끄기 위해서는 B<0> 을 사용합니다. IDE 블럭 모드로 알려진 다중 섹터 "
"모드는 지금의 IDE 하드 장치의 특징이며, 이것은 한 인터럽트당 하나의 섹터를 전"
"송하는 것에 비해 한 인터럽트당 여러개의 섹터를 전송을 가능하게 합니다. 이 기"
"능이 켜졌을 때 일반적으로 OS의 디스크 입출력(I/O)의 부담이 30-50% 감소하게 됩"
"니다.  많은 시스템에서, 이 옵션은 또한 어디에라도 5-50% 의 전송량을 증가하게 "
"합니다. 하지만 어떤 장치는 (대부분의 유명한 WD Caviar 시리즈)는 다중 모드가 "
"켜졌을때 실행이 더 느려지는 것 처럼 보입니다. 당신에게의 유용성은 여러가지 "
"일 것 입니다. 대부분의 장치는 2, 4, 8 또는 16섹터 가운데 적은 셋팅을 지원할 "
"것 입니다. 더 큰 셋팅도 가능하지만, 그것은 어디까지나 장치에 달려있습니다. "
"16 또는 32로 설정하는게 많은 시스템에서 최적인것 같습니다. Western Digital "
"은 많은 그 회사의 장치에게 4 또는 8 정도의 적은 셋팅을 하기를 권하고 있습니"
"다. 그것은 적은 (32kB) 장치 버퍼와 최적화 되지 못한 버퍼 알고리즘 때문입니"
"다.  B<-i> 옵션은 인스톨된 장치의 최대로 가능한 설정 값을 알려 줄 것 입니"
"다.  (출력물의 MaxMultSect 부분을 보시길 바랍니다.) 어떤 장치들은 다중 모드"
"를 가능하게 해달라고 주장하는것 같지만, 어떠한 셋팅에서 데이터를 잃어버리게 "
"됩니다. 이런 드문 상황에서 , 그런 실패는 크게 파일시스템을 손상시키는 결과가 "
"됩니다."

#. type: Plain text
#: debian-bookworm debian-unstable
msgid ""
"Get/set max visible number of sectors, also known as the B<Host Protected "
"Area> setting.  Without a parameter, B<-N> displays the current setting, "
"which is reported as two values: the first gives the current max sectors "
"setting, and the second shows the native (real) hardware limit for the "
"disk.  The difference between these two values indicates how many sectors of "
"the disk are currently hidden from the operating system, in the form of a "
"B<Host Protected Area (HPA).> This area is often used by computer makers to "
"hold diagnostic software, and/or a copy of the originally provided operating "
"system for recovery purposes.  Another possible use is to hide the true "
"capacity of a very large disk from a BIOS/system that cannot normally cope "
"with drives of that size (e.g., most current {2010} BIOSs cannot deal with "
"drives larger than 2\\ TB, so an HPA could be used to cause a 3\\ TB drive "
"to report itself as a 2\\ TB drive).  To change the current max (VERY "
"DANGEROUS, DATA LOSS IS EXTREMELY LIKELY), a new value should be provided "
"(in base10) immediately following the B<-N> option.  This value is specified "
"as a count of sectors, rather than the \"max sector address\" of the drive.  "
"Drives have the concept of a temporary (volatile) setting which is lost on "
"the next hardware reset, as well as a more permanent (non-volatile)  value "
"which survives resets and power cycles.  By default, B<-N> affects only the "
"temporary (volatile) setting.  To change the permanent (non-volatile) value, "
"prepend a leading B<p> character immediately before the first digit of the "
"value.  Drives are supposed to allow only a single permanent change per "
"session.  A hardware reset (or power cycle) is required before another "
"permanent B<-N> operation can succeed.  Note that any attempt to set this "
"value may fail if the disk is being accessed by other software at the same "
"time.  This is because setting the value requires a pair of back-to-back "
"drive commands, but there is no way to prevent some other command from being "
"inserted between them by the kernel.  So if it fails initially, just try "
"again.  Kernel support for B<-N> is buggy for many adapter types across many "
"kernel versions, in that an incorrect (too small) max size value is "
"sometimes reported.  As of the 2.6.27 kernel, this does finally seem to be "
"working on most hardware."
msgstr ""

#. type: Plain text
#: debian-bookworm debian-unstable
#, fuzzy
#| msgid ""
#| "Set the maximum sector count for the drive's internal prefetch "
#| "mechanism.  Not all drives support this feature."
msgid ""
"Set the maximum sector count for the drive's internal prefetch mechanism.  "
"Not all drives support this feature, and it was dropped from the official "
"spec as of ATA-4."
msgstr ""
"장치의 내부적인 선전달(prefetch) 구조를 위한 최대 섹터 수를 설정합니다. 모든 "
"장치가 이 기능을 지원하는 것은 아닙니다."

#. type: Plain text
#: debian-bookworm debian-unstable
msgid ""
"When using the SAT (SCSI ATA Translation) protocol, hdparm normally prefers "
"to use the 16-byte command format whenever possible.  But some USB drive "
"enclosures don't work correctly with 16-byte commands.  This option can be "
"used to force use of the smaller 12-byte command format with such drives.  "
"hdparm will still revert to 16-byte commands for things that cannot be done "
"with the 12-byte format (e.g., sector accesses beyond 28-bits)."
msgstr ""

#. type: Plain text
#: debian-bookworm debian-unstable
msgid ""
"Reads from the specified sector number, and dumps the contents in hex to "
"standard output.  The sector number must be given (base10) after this "
"option.  hdparm will issue a low-level read (completely bypassing the usual "
"block layer read/write mechanisms) for the specified sector.  This can be "
"used to definitively check whether a given sector is bad (media error) or "
"not (doing so through the usual mechanisms can sometimes give false "
"positives)."
msgstr ""

#. type: Plain text
#: debian-bookworm debian-unstable
#, fuzzy
#| msgid ""
#| "Perform timings of device reads for benchmark and comparison purposes.  "
#| "For meaningful results, this operation should be repeated 2-3 times on an "
#| "otherwise inactive system (no other active processes) with at least a "
#| "couple of megabytes of free memory.  This displays the speed of reading "
#| "through the buffer cache to the disk without any prior caching of data.  "
#| "This measurement is an indication of how fast the drive can sustain "
#| "sequential data reads under Linux, without any filesystem overhead.  To "
#| "ensure accurate measurments, the buffer cache is flushed during the "
#| "processing of I<-t> using the BLKFLSBUF ioctl.  If the I<-T> flag is also "
#| "specified, then a correction factor based on the outcome of I<-T> will be "
#| "incorporated into the result reported for the I<-t> operation."
msgid ""
"Perform timings of device reads for benchmark and comparison purposes.  For "
"meaningful results, this operation should be repeated 2\\(en3 times on an "
"otherwise inactive system (no other active processes) with at least a couple "
"of megabytes of free memory.  This displays the speed of reading through the "
"buffer cache to the disk without any prior caching of data.  This "
"measurement is an indication of how fast the drive can sustain sequential "
"data reads under Linux, without any filesystem overhead.  To ensure accurate "
"measurements, the buffer cache is flushed during the processing of I<-t> "
"using the BLKFLSBUF ioctl."
msgstr ""
"비교를 목적으로 벤치마크를 위해 장치를 읽는 시간을 잽니다. 정확한 결과를 위"
"해 이것을 적어도 수 메가 바이트의 메모리 자원이 남은 상태의 사용하지 않는 시"
"스템(실행중인 다른 프로세스가 없는)에서 2-3번 정도 반복해서 수행합니다. 이 옵"
"션은 어떠한 사전의 캐쉬가 되지 않은 데이터를 디스크에서 버퍼 캐쉬를 통해 읽"
"는 속도를 표시합니다. 이 측정법은 리눅스에서 파일시스템의 어떠한 부담을 주지"
"않고 얼마나 빠르게 드라이브가 연속되는 데이터를 지속적으로 읽을수 있는지의 표"
"시입니다.  정확한 측정법을 확실히 하기 위해서는, BLKFLSBUF ioctl 를 사용하여 "
"I<-t> 가 수행되는 동안 버퍼 캐쉬가 비워져야 합니다.  I<-T> 옵션과 같이 사용한"
"다면, 수정된 요인에 기초한 I<-T> 의 결과에 I<-t> 의 결과를 함께 보고할 것 입"
"니다."

#. type: Plain text
#: debian-bookworm debian-unstable
#, fuzzy
#| msgid ""
#| "Perform timings of cache reads for benchmark and comparison purposes.  "
#| "For meaningful results, this operation should be repeated 2-3 times on an "
#| "otherwise inactive system (no other active processes) with at least a "
#| "couple of megabytes of free memory.  This displays the speed of reading "
#| "directly from the Linux buffer cache without disk access.  This "
#| "measurement is essentially an indication of the throughput of the "
#| "processor, cache, and memory of the system under test.  If the I<-t> flag "
#| "is also specified, then a correction factor based on the outcome of I<-T> "
#| "will be incorporated into the result reported for the I<-t> operation."
msgid ""
"Perform timings of cache reads for benchmark and comparison purposes.  For "
"meaningful results, this operation should be repeated 2\\(en3 times on an "
"otherwise inactive system (no other active processes) with at least a couple "
"of megabytes of free memory.  This displays the speed of reading directly "
"from the Linux buffer cache without disk access.  This measurement is "
"essentially an indication of the throughput of the processor, cache, and "
"memory of the system under test."
msgstr ""
"비교를 목적으로 벤치마크를 위해 캐쉬를 읽는 시간을 잽니다. 정확한 결과를 위"
"해 이것을 적어도 수 메가 바이트의 메모리 자원이 남은 상태의 사용하지 않는 시"
"스템(실행중인 다른 프로세스가 없는)에서 2-3번 정도 반복해서 수행합니다. 이 옵"
"션은 디스크 접근(access)없이 리눅스 버퍼 캐쉬로 부터 직접적으로 읽어오는 속도"
"를 표시해줍니다. 이 측정법은 본래 테스트 상태의 시스템의 프로세서, 캐쉬, 메모"
"리의 결과물의 표시입니다.  I<-t> 옵션과 같이 사용한다면, 수정된 요인에 기초"
"한 I<-T> 의 결과에 I<-t> 의 결과를 함께 보고할 것 입니다."

#. type: Plain text
#: debian-bookworm debian-unstable
msgid "E.g., B<hdparm --trim-sector-ranges 1000:4 7894:16 /dev/sdz>"
msgstr ""

#. type: Plain text
#: debian-bookworm debian-unstable
#, fuzzy
#| msgid ""
#| "Get/set interrupt-unmask flag for the drive.  A setting of B<1> permits "
#| "the driver to unmask other interrupts during processing of a disk "
#| "interrupt, which greatly improves Linux's responsiveness and eliminates "
#| "\"serial port overrun\" errors.  B<Use this feature with caution:> some "
#| "drive/controller combinations do not tolerate the increased I/O latencies "
#| "possible when this feature is enabled, resulting in B<massive filesystem "
#| "corruption.> In particular, B<CMD-640B> and B<RZ1000> (E)IDE interfaces "
#| "can be B<unreliable> (due to a hardware flaw) when this option is used "
#| "with kernel versions earlier than 2.0.13.  Disabling the B<IDE prefetch> "
#| "feature of these interfaces (usually a BIOS/CMOS setting)  provides a "
#| "safe fix for the problem for use with earlier kernels."
msgid ""
"Get/set the interrupt-unmask flag for the drive.  A setting of B<1> permits "
"the driver to unmask other interrupts during processing of a disk interrupt, "
"which greatly improves Linux's responsiveness and eliminates \"serial port "
"overrun\" errors.  B<Use this feature with caution:> some drive/controller "
"combinations do not tolerate the increased I/O latencies possible when this "
"feature is enabled, resulting in B<massive filesystem corruption.> In "
"particular, B<CMD-640B> and B<RZ1000> (E)IDE interfaces can be B<unreliable> "
"(due to a hardware flaw) when this option is used with kernel versions "
"earlier than 2.0.13.  Disabling the B<IDE prefetch> feature of these "
"interfaces (usually a BIOS/CMOS setting)  provides a safe fix for the "
"problem for use with earlier kernels."
msgstr ""
"장치의 interrupt-unmask 를 설정하거나 정보를 얻습니다. 이 옵션을 B<1> 로 설정"
"할 경우 장치에게 디스크의 인터럽트가 진행되는 동안 다른 인터럽트를 unmask 하"
"도록 허락합니다. 이것은 리눅스의 반응성을 크게 증가시키고 \"serial port "
"overrun\" 에러를 제거합니다.  B<이 기능을 사용할때는 주의하십시오:> 어떤 드라"
"이브/콘트롤러 조합은 이 기능이 켜졌을때(enable) 입출력(I/O)  대기시간이 증가"
"하는 것에 관대하지 않을수 있습니다. 결과적으로 B<파일시스템을 크게 손상시킵니"
"다.> 특별히 B<CMD-640B> 와 B<RZ1000> (E)IDE 인터페이스는 커널 2.0.13 이전 버"
"젼에서는 이 옵션이 사용될 때 B<신뢰할수 없습니다.> (하드웨어 결함 때문)  이"
"전 버젼의 커널을 사용 할때 이런 문제를 고치기 위해서는 B<IDE prefetch> 기능"
"을 이런 인터페이스 에서 꺼 주시길 바랍니다.(대개 BIOS/CMOS 셋팅)  (대개 BIOS/"
"CMOS 셋팅)"

#. type: Plain text
#: debian-bookworm debian-unstable
msgid ""
"Writes zeros to the specified sector number.  VERY DANGEROUS.  The sector "
"number must be given (base10) after this option.  hdparm will issue a low-"
"level write (completely bypassing the usual block layer read/write "
"mechanisms) to the specified sector.  This can be used to force a drive to "
"repair a bad sector (media error)."
msgstr ""

#. type: Plain text
#: debian-bookworm debian-unstable
#, fuzzy
#| msgid ""
#| "Disable/enable the IDE drive's write-caching feature (usually OFF by "
#| "default)."
msgid "Get/set the IDE/SATA drive's write-caching feature."
msgstr ""
"IDE 드라이브의 쓰기-캐쉬(write-caching) 기능을 끄거나 켭니다.( 대개 기본적으"
"로 꺼져(OFF) 있습니다.)"

#. type: Plain text
#: debian-bookworm debian-unstable
#, fuzzy
#| msgid ""
#| "Set the IDE transfer mode for newer (E)IDE/ATA2 drives.  This is "
#| "typically used in combination with I<-d1> when enabling DMA to/from a "
#| "drive on a supported interface chipset (such as the Intel 430FX Triton), "
#| "where I<-X34> is used to select multiword DMA mode2 transfers.  With "
#| "systems which support UltraDMA burst timings, I<-X66> is used to select "
#| "UltraDMA mode2 transfers (you'll need to prepare the chipset for UltraDMA "
#| "beforehand).  Apart from that, use of this flag is I<seldom necessary> "
#| "since most/all modern IDE drives default to their fastest PIO transfer "
#| "mode at power-on.  Fiddling with this can be both needless and risky.  On "
#| "drives which support alternate transfer modes, I<-X> can be used to "
#| "switch the mode of the drive I<only.> Prior to changing the transfer "
#| "mode, the IDE interface should be jumpered or programmed (see I<-p> "
#| "flag)  for the new mode setting to prevent loss and/or corruption of "
#| "data.  I<Use this with extreme caution!> For the PIO (Programmed Input/"
#| "Output)  transfer modes used by Linux, this value is simply the desired "
#| "PIO mode number plus 8.  Thus, a value of 09 sets PIO mode1, 10 enables "
#| "PIO mode2, and 11 selects PIO mode3.  Setting 00 restores the drive's "
#| "\"default\" PIO mode, and 01 disables IORDY.  For multiword DMA, the "
#| "value used is the desired DMA mode number plus 32.  for UltraDMA, the "
#| "value is the desired UltraDMA mode number plus 64."
msgid ""
"Set the IDE transfer mode for (E)IDE/ATA drives.  This is typically used in "
"combination with B<-d1> when enabling DMA to/from a drive on a supported "
"interface chipset, where B<-X mdma2> is used to select multiword DMA mode2 "
"transfers and B<-X sdma1> is used to select simple mode 1 DMA transfers.  "
"With systems which support UltraDMA burst timings, B<-X udma2> is used to "
"select UltraDMA mode2 transfers (you'll need to prepare the chipset for "
"UltraDMA beforehand).  Apart from that, use of this option is B<seldom "
"necessary> since most/all modern IDE drives default to their fastest PIO "
"transfer mode at power-on.  Fiddling with this can be both needless and "
"risky.  On drives which support alternate transfer modes, B<-X> can be used "
"to switch the mode of the drive B<only.> Prior to changing the transfer "
"mode, the IDE interface should be jumpered or programmed (see B<-p> option)  "
"for the new mode setting to prevent loss and/or corruption of data.  I<Use "
"this with extreme caution!> For the PIO (Programmed Input/Output)  transfer "
"modes used by Linux, this value is simply the desired PIO mode number plus "
"8.  Thus, a value of 09 sets PIO mode1, 10 enables PIO mode2, and 11 selects "
"PIO mode3.  Setting 00 restores the drive's \"default\" PIO mode, and 01 "
"disables IORDY.  For multiword DMA, the value used is the desired DMA mode "
"number plus 32.  for UltraDMA, the value is the desired UltraDMA mode number "
"plus 64."
msgstr ""
"새로운 (E)IDE/ATA2 드라이브를 위해 IDE 전송 모드를 설정합니다. 이 옵션은 기본"
"적으로 I<d1> 옵션과 같이 쓰이며 이것은 지원되는 인터페이스 칩셋 ( Intel "
"430FX Triton 같은 ) 에서 드라이브 에게/에서 DMA 를 켜며, 이러한 칩셋은 I<-"
"X34> 옵션이 multiword DMA mode2 전송을 사용하기 위해 쓰입니다. Ultra DMA 을 "
"지원하는 시스템에서는, I<-X66> 옵션이 UltraDMA mode2 전송을 사용하기 위해 쓰"
"입니다.( 당신은 UltraDMA 칩셋을 사용하기 위해 준비가 필요합니다.) 위에 것은 "
"그렇다 하고, 거의 모든 지금의 IDE 드라이브가 전원을 킬 때 부터 가장 빠른 PIO "
"전송모드를 기본으로 하기 때문에 이 옵션의 사용은 I<좀처럼 필요하지 않습니다."
"> 무의미한 이것은 필요하지 않을수도 위험할수도 있습니다. 양쪽 모두의 전송 모"
"드를 지원하는 드라이브에서는 I<-X> 는 I<단지> 전송 모드를 바꾸는데 사용됩니"
"다. 데이터의 손실이나 손상을 막기위해 전송모드를 바꾸기 전에 IDE 인터페이스"
"는 점퍼가 설정되거나 프로그램 되어있어야 합니다.( I<-p> 옵션을 보자).  I<이 "
"옵션을 사용할때는 극히 주의하길 바랍니다!> PIO(Programmed Input/Output) 전송 "
"모드는 리눅스에서 사용되고, 이 수치는 간단하게 원하는 PIO 모드 번호에서 8 을 "
"더한 값입니다.  그래서 09 값은 PIO 모드1로 설정되고 10은 PIO 모드2로 설정되"
"며 11 은 PIO 모드3 입니다. 00 값으로 설정하면 드라이브의 \"기본\" PIO 모드로 "
"설정됩니다. 그리고 01은 IORDY 를 끕니다. multiword DMA 에서는 원하는 DMA 모드"
"에 32를 더한 값이 사용됩니다. 그리고 UltraDMA 에서는 원하는 UltraDMA 모드에 "
"64 를 더한 값이 사용됩니다."

#. type: Plain text
#: debian-bookworm debian-unstable
msgid ""
"Freeze the drive's security settings.  The drive does not accept any "
"security commands until next power-on reset.  Use this function in "
"combination with --security-unlock to protect drive from any attempt to set "
"a new password. Can be used standalone, too.  No other options are permitted "
"on the command line with this one."
msgstr ""

#. type: Plain text
#: debian-bookworm debian-unstable
#, fuzzy
#| msgid ""
#| "Some options (eg. -r for SCSI) may not work with old kernels as necessary "
#| "ioctl()'s were not supported."
msgid ""
"Some options (e.g., -r for SCSI) may not work with old kernels as necessary "
"ioctl()'s were not supported."
msgstr ""
"어떤 옵션 (예를 들어 SCSI 에서 -r) 은 필요한 ioctl() 가 오래된 커널에는 없기 "
"때문에 오래된 커널에서 동작하지 않을수도 있습니다."

#. type: Plain text
#: debian-bookworm debian-unstable
msgid ""
"The Linux kernel up until 2.6.12 (and probably later) doesn't handle the "
"security unlock and disable commands gracefully and will segfault and in "
"some cases even panic. The security commands however might indeed have been "
"executed by the drive. This poor kernel behaviour makes the PIO data "
"security commands rather useless at the moment."
msgstr ""

#. type: TH
#: opensuse-leap-15-6
#, no-wrap
msgid "May 2021"
msgstr "2021년 5월"

#. type: TH
#: opensuse-leap-15-6
#, no-wrap
msgid "Version 9.62"
msgstr ""

#. type: Plain text
#: opensuse-leap-15-6
msgid ""
"This is a special variation on the B<-I> option, which accepts a drive "
"identification block as standard input instead of using a /dev/hd* "
"parameter.  The format of this block must be B<exactly> the same as that "
"found in the /proc/ide/*/hd*/identify \"files\", or that produced by the B<--"
"Istdout> option described below.  This variation is designed for use with "
"collected \"libraries\" of drive identification information, and can also be "
"used on ATAPI drives which may give media errors with the standard "
"mechanism.  When B<--Istdin> is used, it must be the *only* parameter given."
msgstr ""