path: root/upstream/opensuse-leap-15-6/man1/tknewsbiff.1

.TH TKNEWSBIFF 1 "1 January 1994"
.SH NAME
tknewsbiff \- pop up a window when news appears
.SH SYNOPSIS
.B tknewsbiff
[
.I server or config-file
]
.br
.SH INTRODUCTION
.B tknewsbiff
pops up a window when there is unread news in your favorite newsgroups
and removes the window after you've read the news.  tknewsbiff can
optionally play a sound, start your newsreader, etc.

.SH SELECTING NEWSGROUPS

By default, the configuration file ~/.tknewsbiff describes how
tknewsbiff behaves.  The syntax observes the usual Tcl rules
- however, even if you don't know Tcl, all but the most esoteric
configurations will be obvious.

Each newsgroup (or set of newsgroups) to be watched is described by
using the "watch" command.  For example:

.nf

watch dc.dining
watch nist.*
watch comp.unix.wizard  -threshold 3
watch *.sources.*       -threshold 20

.fi

For each newsgroup pattern, any newsgroup that matches it and which
you are subscribed to (according to your newsrc file) is eligible for
reporting.  By default, tknewsbiff reports on the newsgroup if there
is at least one unread article.  The "-threshold" flag changes the
threshold to the following number.  For example, "-threshold 3" means
there must be at least three articles unread before tknewsbiff will
report the newsgroup.

If no watch commands are given (or no configuration file exists), all
groups which are subscribed to are watched.

To suppress newsgroups that would otherwise be reported, use the
"ignore" command.  For example, the following matches all comp.* and
nist.* newgroups except for nist.posix or .d (discussion) groups:

.nf

watch comp.*
watch nist.*
ignore nist.posix.*
ignore *.d

.fi

The flag "-new" describes a command to be executed when the newsgroup
is first reported as having unread news.  For example, the following
lines invoke the UNIX command "play" to play a sound.

.nf

watch dc.dining -new "exec play /usr/local/sounds/yumyum.au"
watch rec.auto* -new "exec play /usr/local/sounds/vroom.au"

.fi

You can cut down on the verbosity of actions by defining procedures.
For example, if you have many -new flags that all play sound files,
you could define a sound procedure.  This would allow the -new
specification to be much shorter.

.nf

proc play {sound} {
	exec play /usr/local/sounds/$sound.au
}

watch dc.dining -new "play yumyum"
watch rec.auto* -new "play vroom"

.fi

As an aside, you can put an "&" at the end of an "exec" command to get
commands to execute asynchronously.  However, it's probably not a good
idea to do this when playing sound files anyway.

"newsgroup" is a read-only variable which contains the name of the
newsgroup that is being reported.  This is useful when the action is
triggered by a pattern.  For example, the following line could run the
newsgroup name through a speech synthesizer:

.nf

watch * -new {
	exec play herald.au
	exec speak "New news has arrived in $newsgroup."
}

.fi

The flag "\-display" describes a command to be executed every time the
newsgroup is reported as having unread news.  The special command
"display" is the default command.  It schedules $newsgroup to be
written to tknewsbiff's display when it is rewritten.  For example, by
explicitly providing a -display flag that omits the display command,
you can disable the display of newsgroups that are already reported
via -new.

.nf

watch dc.dining -new {exec play yumyum.au} -display {}

.fi

If you want to execute an action repeatedly and
.I still
display the newsgroup in the default manner,
explicitly invoke the display command via the -display flag.  For example:

.nf

watch *security* -display {
	exec play red-alert.au
	display
}

.fi

Actions associated with the -new and -display flags are executed only
once for each matching newsgroup.  The command executed is the one
associated with the first pattern in the configuration file that
matches and observes the given threshold.

Any command that is simply listed in the configuration file is
executed each time before the update loop in tknewsbiff.  The reserved
(but user-defined) procedure "user" is run immediately after the
newsgroups are scheduled to be written to the display and before they
are actually written.

For example, suppose unread articles appear in several rec.auto groups
and you play the same sound for each one.  To prevent playing the
sound several times in a row, make the -new command simply set a flag.
In the user procedure, play the sound if the flag is set (and then
reset the flag).

The user procedure could also be used to start a newsreader.  This
would avoid the possibility of starting multiple newsreaders just
because multiple newsgroups contained unread articles.  (A check
should, of course, be made to make sure that a newsreader is not
already running.)

.SH MORE VARIABLES

The following example lines show variables that can affect the
behavior of tknewsbiff

.nf

set delay          120
set server         news.nist.gov
set server_timeout 60
set newsrc         ~/.newsrc
set width          40
set height         20
set active_file    /usr/news/lib/active

.fi

tknewsbiff alternates between checking for unread news and
sleeping (kind of like many undergraduates).  The "delay" variable
describes how many seconds to sleep.

The "server" variable names an NNTP news-server.
The default is "news".  The "server" variable is
only used if the "active_file" variable is not set.

The "server_timeout" variable describes how how many seconds to wait
for a response from the server before giving up.  -1 means wait
forever or until the server itself times out.  The default is 60
seconds.

The "newsrc" variable describes the name of your .newsrc file.  By
default, tknewsbiff looks in your home directory for a newsrc file.  A
server-specific newsrc is used if found.  For example, if you have set
server to "cubit.nist.gov", then tknewsbiff looks for
~/.newsrc-cubit.nist.gov.  (This is the Emacs gnus convention - which
is very convenient when you read news from multiple servers.)  If
there is no server-specific newsrc, tknewsbiff uses ~/.newsrc.

The "width" variable describes the width that tknewsbiff will use to
display information.  If any newsgroup names are long enough, they
will be truncated so that the article counts can still be shown.  You
can manually resize the window to see what was truncated.  However, if
your configuration file sets the width variable, the window will be
restored to that size the next time that tknewsbiff checks for unread
news and updates its display.

The "height" variable describes the maximum height that tknewsbiff
will use to display information.  If fewer newsgroups are reported,
tknewsbiff will shrink the window appropriately.  You can manually
resize the window but if your configuration file sets the height
variable, the window will be restored to that size the next time that
tknewsbiff checks for unread news and updates its display.

The "active_file" variable describes the name of the news active file.
If set, the active file is read directly in preference to using NNTP
(even if the "server" variable is set).  This is particularly useful
for testing out new configuration files since you can edit a fake
active file and then click button 2 to immediately see how tknewsbiff
responds (see BUTTONS below).

If the environment variable DOTDIR is set, then its value is used as a
directory in which to find all dotfiles instead of from the home
directory.  In particular, this affects the tknewsbiff configuration
file and the .newsrc file (assuming the newsrc variable is not set
explicitly).

.SH WATCHING DIFFERENT NEWS SERVERS

To watch multiple servers, run tknewsbiff multiple times.  (Since you
need different .newsrc files and the servers have different newsgroups
and article numbers anyway, there is no point in trying to do this in
a single process.)

You can point tknewsbiff at a different server with an appropriate
argument.  The argument is tried both as a configuration file name and
as a suffix to the string "~/.tknewsbiff-".  So if you want to watch
the server "kidney", store the tknewsbiff configuration information in
~/.tknewsbiff-kidney".  The following two commands will both use that
configuration file.

.nf

	tknewsbiff kidney
	tknewsbiff ~/.tknewsbiff-kidney

.fi

In both cases, the actual server to contact is set by the value of the
server variable in the configuration file.

If no configuration file is found, the argument is used as the server
to contact.  This allows tknewsbiff to be run with no preparation
whatsoever.

If the argument is the special keyword "active" (or ends in
"/active"), it is used as the name of an active file.  This is in turn
used to initialize the variable "active_file" so that tknewsbiff reads
from the active file directly rather than using NNTP.

Creating your own active file is a convenient way of testing your
configuration file.  For example, after running the following command,
you can repeatedly edit your active file and trigger the update-now
command (either by pressing button 2 or setting the delay variable
very low) to see how tknewsbiff responds.

The active file must follow the format of a real active file.  The
format is one newsgroup per line.  After the newsgroup name is the
number of the highest article, the lowest article.  Lastly is the
letter y or m.  m means the newsgroup is moderated.  y means posting
is allowed.

.SH WINDOW

When unread news is found, a window is popped up.  The window lists
the names of the newsgroups and the number of unread articles in each
(unless suppressed by the -display flag).  When there is no longer any
unread news, the window disappears (although the process continues to
run).

.SH BUTTONS

Button or key bindings may be assigned by bind commands.  Feel free to
change them.  The default bind commands are:

.nf

bind .list <1> help
bind .list <2> update-now
bind .list <3> unmapwindow

.fi

By default button 1 (left) is bound to "help".  The help command
causes tknewsbiff to pop up a help window.

By default, button 2 (middle) is bound to "update-now".  The update-now
command causes tknewsbiff to immediately check for unread news.  If
your news server is slow or maintains a very large number of
newsgroups, or you have a large number of patterns in your
configuration file, tknewsbiff can take considerable time before
actually updating the window.

By default, button 3 (right) is bound to "unmapwindow".  The
unmapwindow command causes tknewsbiff to remove the window from the
display until the next time it finds unread news.  (The mapwindow
command causes tknewsbiff to restore the window.)

As an example, here is a binding to pop up an xterm and run rn when
you hold down the shift key and press button 1 in the listing window.

.nf

bind .list <Shift-1> {
	exec xterm -e rn &
}

.fi

Here is a similar binding.  However it tells rn to look only at the
newsgroup that is under the mouse when you pressed it.  (The
"display_list" variable is described later in this man page.)

.nf

bind .list <Shift-1> {
	exec xterm -e rn [lindex $display_list [.list nearest %y]] &
}

.fi

.SH OTHER COMMANDS AND VARIABLES

Built-in commands already mentioned are: watch, ignore, display, help,
update-now, unmapwindow, and mapwindow.

Any Tcl and Tk command can also be given.  In particular, the list of
newsgroups is stored in the list widget ".list", and the scroll bar is
stored in the scrollbar widget ".scroll".  So for example, if you want
to change the foreground and background colors of the newsgroup list,
you can say:

.nf

	.list config -bg honeydew1 -fg orchid2

.fi

These can also be controlled by the X resource database as well.
However, the configuration file allows arbitrarily complex commands to
be evaluated rather than simple assignments.

Certain Tcl/Tk commands can disrupt proper function of tknewsbiff.
These will probably be obvious to anyone who knows enough to give
these commands in the first place.  As a simple example, the program
assumes the font in the list box is of fixed width.  The newsgroups
will likely not align if you use a variable-width font.

The following variables are accessible and can be used for esoteric
uses.  All other variables are private.  Private variables and
commands begin with "_" so you don't need to worry about accidental
collisions.

The array "db" is a database which maintains information about read
and unread news.  db($newsgroup,hi) is the highest article that
exists.  db($newsgroup,seen) is the highest article that you have
read.

A number of lists maintain interesting information. "active_list" is a
list of known newsgroups.  "seen_list" is a list of newsgroups that
have been seen so far as the -new and -display flags are being
processed.  "previous_seen_list" is "seen_list" from the previous
cycle.  "ignore_list" is the list of newsgroup patterns to ignore.
"watch_list" is the list of newsgroup patterns to watch.
"display_list" is the list of newsgroup will be displayed at the next
opportunity.

.SH UPDATING YOUR FILES

tknewsbiff automatically rereads your configuration file each time it
wakes up to check for unread news.  To force tknewsbiff to reread the
file immediately (such as if you are testing a new configuration or
have just modified your newsrc file), press button 2 in the display
(see BUTTONS above).

.SH CAVEATS

tknewsbiff defines the number of unread articles as the highest
existing article minus the highest article that you've read.  So if
you've read the last article in the newsgroup but no others,
tknewsbiff thinks there are no unread articles.  (It's impossible to
do any better by reading the active file and it would be very time
consuming to do this more accurately via NNTP since servers provide no
efficient way of reporting their own holes in the newsgroups.)
Fortunately, this definition is considered a feature by most people.
It allows you to read articles and then mark them "unread" but not
have tknewsbiff continue telling you that they are unread.

.SH UNWARRANTED CONCERNS

Your news administrator may wonder if many people using tknewsbiff
severely impact an NNTP server.  In fact, the impact is negligible
even when the delay is very low.  To gather all the information it
needs, tknewsbiff uses a single NNTP query - it just asks for the
active file.  The NNTP server does no computation, formatting, etc, it
just sends the file.  All the interesting processing happens locally
in the tknewsbiff program itself.

.SH BUGS

The man page is longer than the program.

.SH SEE ALSO
.I
"Exploring Expect: A Tcl-Based Toolkit for Automating Interactive Programs"
\fRby Don Libes,
O'Reilly and Associates, January 1995.
.SH AUTHOR
Don Libes, National Institute of Standards and Technology