Merging upstream version 6.7.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 20 insertions, 20 deletions

diff --git a/man4/cciss.4 b/man4/cciss.4
index 9194c8a..6b6a6d1 100644
--- a/man4/cciss.4
+++ b/man4/cciss.4
@@ -6,7 +6,7 @@
 .\"
 .\" shorthand for double quote that works everywhere.
 .ds q \N'34'
-.TH cciss 4 2023-05-03 "Linux man-pages 6.05.01"
+.TH cciss 4 2023-10-31 "Linux man-pages 6.7"
 .SH NAME
 cciss \- HP Smart Array block driver
 .SH SYNOPSIS
@@ -20,7 +20,7 @@ This obsolete driver was removed in Linux 4.14,
 as it is superseded by the
 .BR hpsa (4)
 driver in newer kernels.
-.PP
+.P
 .B cciss
 is a block driver for older HP Smart Array RAID controllers.
 .SS Options
@@ -32,7 +32,7 @@ driver from attempting to drive any controllers that the
 driver is capable of controlling, which is to say, the
 .B cciss
 driver is restricted by this option to the following controllers:
-.PP
+.P
 .nf
     Smart Array 5300
     Smart Array 5i
@@ -56,7 +56,7 @@ driver is restricted by this option to the following controllers:
 The
 .B cciss
 driver supports the following Smart Array boards:
-.PP
+.P
 .nf
     Smart Array 5300
     Smart Array 5i
@@ -95,7 +95,7 @@ run from the Smart Array's option ROM at boot time.
 .SH FILES
 .SS Device nodes
 The device naming scheme is as follows:
-.PP
+.P
 Major numbers:
 .IP
 .TS
@@ -109,9 +109,9 @@ r r.
 110	cciss6
 111	cciss7
 .TE
-.PP
+.P
 Minor numbers:
-.PP
+.P
 .EX
     b7 b6 b5 b4 b3 b2 b1 b0
     |\-\-\-\-+\-\-\-\-| |\-\-\-\-+\-\-\-\-|
@@ -120,7 +120,7 @@ Minor numbers:
          |
          +\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\- Logical Volume number
 .EE
-.PP
+.P
 The device naming scheme is:
 .TS
 li l.
@@ -140,7 +140,7 @@ The files
 contain information about
 the configuration of each controller.
 For example:
-.PP
+.P
 .in +4n
 .EX
 $ \fBcd /proc/driver/cciss\fP
@@ -237,7 +237,7 @@ for more details.)
 You must enable "SCSI tape drive support for Smart Array 5xxx" and
 "SCSI support" in your kernel configuration to be able to use SCSI
 tape drives with your Smart Array 5xxx controller.
-.PP
+.P
 Additionally, note that the driver will not engage the SCSI core at
 init time.
 The driver must be directed to dynamically engage the SCSI core via the
@@ -255,7 +255,7 @@ This is best done via an initialization script
 .IR /etc/init.d ,
 but could vary depending on distribution).
 For example:
-.PP
+.P
 .in +4n
 .EX
 for x in /proc/driver/cciss/cciss[0\-9]*
@@ -264,10 +264,10 @@ do
 done
 .EE
 .in
-.PP
+.P
 Once the SCSI core is engaged by the driver, it cannot be disengaged
 (except by unloading the driver, if it happens to be linked as a module.)
-.PP
+.P
 Note also that if no sequential access devices or medium changers are
 detected, the SCSI core will not be engaged by the action of the above
 script.
@@ -283,7 +283,7 @@ filesystem.
 For example:
 .IP
 echo "rescan" > /proc/scsi/cciss0/1
-.PP
+.P
 This causes the driver to:
 .RS
 .IP (1) 5
@@ -293,20 +293,20 @@ physical SCSI buses and/or fiber channel arbitrated loop, and
 make note of any new or removed sequential access devices
 or medium changers.
 .RE
-.PP
+.P
 The driver will output messages indicating which
 devices have been added or removed and the controller, bus, target, and
 lun used to address each device.
 The driver then notifies the SCSI midlayer
 of these changes.
-.PP
+.P
 Note that the naming convention of the
 .I /proc
 filesystem entries
 contains a number in addition to the driver name
 (e.g., "cciss0"
 instead of just "cciss", which you might expect).
-.PP
+.P
 Note:
 .I Only
 sequential access devices and medium changers are presented
@@ -340,7 +340,7 @@ If that doesn't work, the device is reset.
 If that doesn't work, the SCSI bus is reset.
 .IP (4)
 If that doesn't work, the host bus adapter is reset.
-.PP
+.P
 The
 .B cciss
 driver is a block
@@ -358,7 +358,7 @@ in aborting commands, and sometimes it appears they will not even
 obey a reset command, though in most circumstances they will.
 If the command cannot be aborted and the device cannot be
 reset, the device will be set offline.
-.PP
+.P
 In the event that the error-handling code is triggered and a tape drive is
 successfully reset or the tardy command is successfully aborted, the
 tape drive may still not allow I/O to continue until some command
@@ -371,7 +371,7 @@ for example) before I/O can proceed again to a tape drive that was reset.
 .BR cciss_vol_status (8),
 .BR hpacucli (8),
 .BR hpacuxe (8)
-.PP
+.P
 .UR http://cciss.sf.net
 .UE ,
 and