diff options
Diffstat (limited to 'man4/smartpqi.4')
-rw-r--r-- | man4/smartpqi.4 | 326 |
1 files changed, 326 insertions, 0 deletions
diff --git a/man4/smartpqi.4 b/man4/smartpqi.4 new file mode 100644 index 0000000..ce1f5b7 --- /dev/null +++ b/man4/smartpqi.4 @@ -0,0 +1,326 @@ +'\" t +.\" Copyright (C) 2019, Microchip Technology Inc. and its subsidiaries +.\" Copyright (C) 2016-2018, Microsemi Corporation +.\" Copyright (C) 2016, PMC-Sierra, Inc. +.\" Written by Kevin Barnett <kevin.barnett@microsemi.com> +.\" +.\" SPDX-License-Identifier: GPL-2.0-only +.TH smartpqi 4 2022-12-15 "Linux man-pages 6.05.01" +.SH NAME +smartpqi \- Microsemi Smart Family SCSI driver +.SH SYNOPSIS +.SY "modprobe smartpqi" +.RB [ disable_device_id_wildcards= { 0 | 1 }] +.RB [ disable_heartbeat= { 0 | 1 }] +.RB [ disable_ctrl_shutdown= { 0 | 1 }] +.RB [ lockup_action= { none | reboot | panic }] +.RB [ expose_ld_first= { 0 | 1 }] +.RB [ hide_vsep= { 0 | 1 }] +.YS +.SH DESCRIPTION +.B smartpqi +is a SCSI driver for Microsemi Smart Family controllers. +.SS Supported \f[BI]ioctl\fP\/() operations +For compatibility with applications written for the +.BR cciss (4) +and +.BR hpsa (4) +drivers, many, but not all of the +.BR ioctl (2) +operations supported by the +.B hpsa +driver are also supported by the +.B smartpqi +driver. +The data structures used by these operations +are described in the Linux kernel source file +.IR include/linux/cciss_ioctl.h . +.TP +.BR CCISS_DEREGDISK ", " CCISS_REGNEWDISK ", " CCISS_REGNEWD +These operations +all do exactly the same thing, which is to cause the driver to re-scan +for new devices. +This does exactly the same thing as writing to the +.BR smartpqi -specific +host +.I rescan +attribute. +.TP +.B CCISS_GETPCIINFO +This operation returns the PCI domain, bus, +device, and function and "board ID" (PCI subsystem ID). +.TP +.B CCISS_GETDRIVVER +This operation returns the driver version in four bytes, encoded as: +.IP +.in +4n +.EX +(major_version << 28) | (minor_version << 24) | + (release << 16) | revision +.EE +.in +.TP +.B CCISS_PASSTHRU +Allows BMIC and CISS commands to be passed through to the controller. +.SS Boot options +.TP +.BR disable_device_id_wildcards= { 0 | 1 } +Disables support for device ID wildcards. +The default value is 0. +.TP +.BR disable_heartbeat= { 0 | 1 } +Disables support for the controller's heartbeat check. +This parameter is used for debugging purposes. +The default value is 0, leaving the controller's heartbeat check active. +.TP +.BR disable_ctrl_shutdown= { 0 | 1 } +Disables support for shutting down the controller in the +event of a controller lockup. +The default value is 0. +.TP +.BR lockup_action= { none | reboot | panic } +Specifies the action the driver takes when a controller +lockup is detected. +The default action is +.BR none . +.TS +l l +--- +l l. +parameter action +\fBnone\fP take controller offline only +\fBreboot\fP reboot the system +\fBpanic\fP panic the system +.TE +.TP +.BR expose_ld_first= { 0 | 1 } +This option enables support for exposing logical devices to +the operating system before physical devices. +The default value is 0. +.TP +.BR hide_vsep= { 0 | 1 } +This option enables disabling exposure of the virtual SEP to the host. +This is usually associated with direct attached drives. +The default value is 0. +.SH FILES +.SS Device nodes +Logical drives are accessed via the SCSI disk driver +.RI ( sd ), +tape drives via the SCSI tape driver +.RI ( st ), +and the RAID controller via the SCSI generic driver +.RI ( sg ), +with device nodes named +.IR /dev/sd *, +.IR /dev/st *, +and +.IR /dev/sg *, +respectively. +.SS SmartPQI-specific host attribute files in \f[BI]/sys\fP +.TP +.IR /sys/class/scsi_host/host * /rescan +The host +.I rescan +attribute is a write-only attribute. +Writing to this attribute will cause the driver to scan for new, +changed, or removed devices (e.g., hot-plugged tape drives, or newly +configured or deleted logical drives) and notify the SCSI mid-layer of +any changes detected. +Usually this action is triggered automatically by configuration +changes, so the user should not normally have to write to this file. +Doing so may be useful when hot-plugging devices such as tape drives or +entire storage boxes containing pre-configured logical drives. +.TP +.IR /sys/class/scsi_host/host * /version +The host +.I version +attribute is a read-only attribute. +This attribute contains the driver version and the controller firmware +version. +.IP +For example: +.IP +.in +4n +.EX +$ \c +.B cat /sys/class/scsi_host/host1/version +driver: 1.1.2\-126 +firmware: 1.29\-112 +.EE +.in +.TP +.IR /sys/class/scsi_host/host * /lockup_action +The host +.I lockup_action +attribute is a read/write attribute. +This attribute will cause the driver to perform a specific action in the +unlikely event that a controller lockup has been detected. +See +.B OPTIONS +above +for an explanation of the +.I lockup_action +values. +.TP +.I /sys/class/scsi_host/host*/driver_version +The +.I driver_version +attribute is read-only. +This attribute contains the smartpqi driver version. +.IP +For example: +.IP +.in +4n +.EX +$ \c +.B cat /sys/class/scsi_host/host1/driver_version +1.1.2\-126 +.EE +.in +.TP +.I /sys/class/scsi_host/host*/firmware_version +The +.I firmware_version +attribute is read-only. +This attribute contains the controller firmware version. +.IP +For example: +.IP +.in +4n +.EX +$ \c +.B cat /sys/class/scsi_host/host1/firmware_version +1.29\-112 +.EE +.in +.TP +.I /sys/class/scsi_host/host*/model +The +.I model +attribute is read-only. +This attribute contains the product identification string of the controller. +.IP +For example: +.IP +.in +4n +.EX +$ \c +.B cat /sys/class/scsi_host/host1/model +1100\-16i +.EE +.in +.TP +.I /sys/class/scsi_host/host*/serial_number +The +.I serial_number +attribute is read-only. +This attribute contains the unique identification number of the controller. +.IP +For example: +.IP +.in +4n +.EX +$ \c +.B cat /sys/class/scsi_host/host1/serial_number +6A316373777 +.EE +.in +.TP +.I /sys/class/scsi_host/host*/vendor +The +.I vendor +attribute is read-only. +This attribute contains the vendor identification string of the controller. +.IP +For example: +.IP +.in +4n +.EX +$ \c +.B cat /sys/class/scsi_host/host1/vendor +Adaptec +.EE +.in +.SS SmartPQI-specific disk attribute files in \f[BI]/sys\fP +In the file specifications below, +.I c +stands for the number of the appropriate SCSI controller, +.I b +is the bus number, +.I t +the target number, and +.I l +is the logical unit number (LUN). +.TP +.IR /sys/class/scsi_disk/ c : b : t : l /device/raid_level +The +.I raid_level +attribute is read-only. +This attribute contains the RAID level of each logical drive. +.IP +For example: +.IP +.in +4n +.EX +$ \c +.B cat /sys/class/scsi_disk/4:0:0:0/device/raid_level +RAID 0 +.EE +.in +.TP +.IR /sys/class/scsi_disk/c : b : t : l/device/sas_address +The +.I sas_address +attribute is read-only. +This attribute contains the unique identifier of the disk. +.IP +For example: +.IP +.in +4n +.EX +$ \c +.B cat /sys/class/scsi_disk/1:0:3:0/device/sas_address +0x5001173d028543a2 +.EE +.in +.TP +.IR /sys/class/scsi_disk/c : b : t : l/device/ssd_smart_path_enabled +The +.I ssd_smart_path_enabled +attribute is read-only. +This attribute is for ioaccel-enabled volumes. +(Ioaccel is an alternative driver submission path that allows the +driver to send I/O requests directly to backend SCSI devices, +bypassing the controller firmware. +This results in an increase in performance. +This method is used for HBA disks and for logical volumes comprised of SSDs.) +Contains 1 if ioaccel is enabled for the volume and 0 otherwise. +.IP +For example: +.IP +.in +4n +.EX +$ \c +.B cat /sys/class/scsi_disk/1:0:3:0/device/ssd_smart_path_enabled +0 +.EE +.in +.SH VERSIONS +The +.B smartpqi +driver was added in Linux 4.9. +.SH NOTES +.SS Configuration +To configure a Microsemi Smart Family controller, +refer to the User Guide for the controller, +which can be found by searching for the specific controller at +.UR https://storage.microsemi.com/ +.UE . +.SH SEE ALSO +.BR cciss (4), +.BR hpsa (4), +.BR sd (4), +.BR st (4) +.PP +.I Documentation/ABI/testing/sysfs\-bus\-pci\-devices\-cciss +in the Linux kernel source tree. |