From 3d08cd331c1adcf0d917392f7e527b3f00511748 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Fri, 24 May 2024 06:52:22 +0200 Subject: Merging upstream version 6.8. Signed-off-by: Daniel Baumann --- man/man3/mallopt.3 | 619 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 619 insertions(+) create mode 100644 man/man3/mallopt.3 (limited to 'man/man3/mallopt.3') diff --git a/man/man3/mallopt.3 b/man/man3/mallopt.3 new file mode 100644 index 0000000..d684eb1 --- /dev/null +++ b/man/man3/mallopt.3 @@ -0,0 +1,619 @@ +.\" Copyright (c) 2012 by Michael Kerrisk +.\" +.\" SPDX-License-Identifier: Linux-man-pages-copyleft +.\" +.TH mallopt 3 2024-05-02 "Linux man-pages (unreleased)" +.SH NAME +mallopt \- set memory allocation parameters +.SH LIBRARY +Standard C library +.RI ( libc ", " \-lc ) +.SH SYNOPSIS +.nf +.B #include +.P +.BI "int mallopt(int " param ", int " value ); +.fi +.SH DESCRIPTION +The +.BR mallopt () +function adjusts parameters that control the behavior of the +memory-allocation functions (see +.BR malloc (3)). +The +.I param +argument specifies the parameter to be modified, and +.I value +specifies the new value for that parameter. +.P +The following values can be specified for +.IR param : +.TP +.B M_ARENA_MAX +If this parameter has a nonzero value, +it defines a hard limit on the maximum number of arenas that can be created. +An arena represents a pool of memory that can be used by +.BR malloc (3) +(and similar) calls to service allocation requests. +Arenas are thread safe and +therefore may have multiple concurrent memory requests. +The trade-off is between the number of threads and the number of arenas. +The more arenas you have, the lower the per-thread contention, +but the higher the memory usage. +.IP +The default value of this parameter is 0, +meaning that the limit on the number of arenas is determined +according to the setting of +.BR M_ARENA_TEST . +.IP +This parameter has been available since glibc 2.10 via +.BR \-\-enable\-experimental\-malloc , +and since glibc 2.15 by default. +In some versions of the allocator there was no limit on the number +of created arenas (e.g., CentOS 5, RHEL 5). +.IP +When employing newer glibc versions, applications may in +some cases exhibit high contention when accessing arenas. +In these cases, it may be beneficial to increase +.B M_ARENA_MAX +to match the number of threads. +This is similar in behavior to strategies taken by tcmalloc and jemalloc +(e.g., per-thread allocation pools). +.TP +.B M_ARENA_TEST +This parameter specifies a value, in number of arenas created, +at which point the system configuration will be examined +to determine a hard limit on the number of created arenas. +(See +.B M_ARENA_MAX +for the definition of an arena.) +.IP +The computation of the arena hard limit is implementation-defined +and is usually calculated as a multiple of the number of available CPUs. +Once the hard limit is computed, the result is final and constrains +the total number of arenas. +.IP +The default value for the +.B M_ARENA_TEST +parameter is 2 on systems where +.I sizeof(long) +is 4; otherwise the default value is 8. +.IP +This parameter has been available since glibc 2.10 via +.BR \-\-enable\-experimental\-malloc , +and since glibc 2.15 by default. +.IP +The value of +.B M_ARENA_TEST +is not used when +.B M_ARENA_MAX +has a nonzero value. +.TP +.B M_CHECK_ACTION +Setting this parameter controls how glibc responds when various kinds +of programming errors are detected (e.g., freeing the same pointer twice). +The 3 least significant bits (2, 1, and 0) of the value assigned +to this parameter determine the glibc behavior, as follows: +.RS +.TP +Bit 0 +If this bit is set, then print a one-line message on +.I stderr +that provides details about the error. +The message starts with the string "***\ glibc detected\ ***", +followed by the program name, +the name of the memory-allocation function in which the error was detected, +a brief description of the error, +and the memory address where the error was detected. +.TP +Bit 1 +If this bit is set, then, +after printing any error message specified by bit 0, +the program is terminated by calling +.BR abort (3). +Since glibc 2.4, +if bit 0 is also set, +then, between printing the error message and aborting, +the program also prints a stack trace in the manner of +.BR backtrace (3), +and prints the process's memory mapping in the style of +.IR /proc/ pid /maps +(see +.BR proc (5)). +.TP +Bit 2 (since glibc 2.4) +This bit has an effect only if bit 0 is also set. +If this bit is set, +then the one-line message describing the error is simplified +to contain just the name of the function where the error +was detected and the brief description of the error. +.RE +.IP +The remaining bits in +.I value +are ignored. +.IP +Combining the above details, +the following numeric values are meaningful for +.BR M_CHECK_ACTION : +.RS 12 +.TP +.B 0 +Ignore error conditions; continue execution (with undefined results). +.TP +.B 1 +Print a detailed error message and continue execution. +.TP +.B 2 +Abort the program. +.TP +.B 3 +Print detailed error message, stack trace, and memory mappings, +and abort the program. +.TP +.B 5 +Print a simple error message and continue execution. +.TP +.B 7 +Print simple error message, stack trace, and memory mappings, +and abort the program. +.RE +.IP +Since glibc 2.3.4, the default value for the +.B M_CHECK_ACTION +parameter is 3. +In glibc 2.3.3 and earlier, the default value is 1. +.IP +Using a nonzero +.B M_CHECK_ACTION +value can be useful because otherwise a crash may happen much later, +and the true cause of the problem is then very hard to track down. +.TP +.B M_MMAP_MAX +.\" The following text adapted from comments in the glibc source: +This parameter specifies the maximum number of allocation requests that +may be simultaneously serviced using +.BR mmap (2). +This parameter exists because some systems have a limited number +of internal tables for use by +.BR mmap (2), +and using more than a few of them may degrade performance. +.IP +The default value is 65,536, +a value which has no special significance and +which serves only as a safeguard. +Setting this parameter to 0 disables the use of +.BR mmap (2) +for servicing large allocation requests. +.TP +.B M_MMAP_THRESHOLD +For allocations greater than or equal to the limit specified (in bytes) by +.B M_MMAP_THRESHOLD +that can't be satisfied from the free list, +the memory-allocation functions employ +.BR mmap (2) +instead of increasing the program break using +.BR sbrk (2). +.IP +Allocating memory using +.BR mmap (2) +has the significant advantage that the allocated memory blocks +can always be independently released back to the system. +(By contrast, +the heap can be trimmed only if memory is freed at the top end.) +On the other hand, there are some disadvantages to the use of +.BR mmap (2): +deallocated space is not placed on the free list +for reuse by later allocations; +memory may be wasted because +.BR mmap (2) +allocations must be page-aligned; +and the kernel must perform the expensive task of zeroing out +memory allocated via +.BR mmap (2). +Balancing these factors leads to a default setting of 128*1024 for the +.B M_MMAP_THRESHOLD +parameter. +.IP +The lower limit for this parameter is 0. +The upper limit is +.BR DEFAULT_MMAP_THRESHOLD_MAX : +512*1024 on 32-bit systems or +.I 4*1024*1024*sizeof(long) +on 64-bit systems. +.IP +.IR Note : +Nowadays, glibc uses a dynamic mmap threshold by default. +The initial value of the threshold is 128*1024, +but when blocks larger than the current threshold and less than or equal to +.B DEFAULT_MMAP_THRESHOLD_MAX +are freed, +the threshold is adjusted upward to the size of the freed block. +When dynamic mmap thresholding is in effect, +the threshold for trimming the heap is also dynamically adjusted +to be twice the dynamic mmap threshold. +Dynamic adjustment of the mmap threshold is disabled if any of the +.BR M_TRIM_THRESHOLD , +.BR M_TOP_PAD , +.BR M_MMAP_THRESHOLD , +or +.B M_MMAP_MAX +parameters is set. +.TP +.BR M_MXFAST " (since glibc 2.3)" +.\" The following text adapted from comments in the glibc sources: +Set the upper limit for memory allocation requests that are satisfied +using "fastbins". +(The measurement unit for this parameter is bytes.) +Fastbins are storage areas that hold deallocated blocks of memory +of the same size without merging adjacent free blocks. +Subsequent reallocation of blocks of the same size can be handled +very quickly by allocating from the fastbin, +although memory fragmentation and the overall memory footprint +of the program can increase. +.IP +The default value for this parameter is +.I 64*sizeof(size_t)/4 +(i.e., 64 on 32-bit architectures). +The range for this parameter is 0 to +.IR 80*sizeof(size_t)/4 . +Setting +.B M_MXFAST +to 0 disables the use of fastbins. +.TP +.BR M_PERTURB " (since glibc 2.4)" +If this parameter is set to a nonzero value, +then bytes of allocated memory (other than allocations via +.BR calloc (3)) +are initialized to the complement of the value +in the least significant byte of +.IR value , +and when allocated memory is released using +.BR free (3), +the freed bytes are set to the least significant byte of +.IR value . +This can be useful for detecting errors where programs +incorrectly rely on allocated memory being initialized to zero, +or reuse values in memory that has already been freed. +.IP +The default value for this parameter is 0. +.TP +.B M_TOP_PAD +This parameter defines the amount of padding to employ when calling +.BR sbrk (2) +to modify the program break. +(The measurement unit for this parameter is bytes.) +This parameter has an effect in the following circumstances: +.RS +.IP \[bu] 3 +When the program break is increased, then +.B M_TOP_PAD +bytes are added to the +.BR sbrk (2) +request. +.IP \[bu] +When the heap is trimmed as a consequence of calling +.BR free (3) +(see the discussion of +.BR M_TRIM_THRESHOLD ) +this much free space is preserved at the top of the heap. +.RE +.IP +In either case, +the amount of padding is always rounded to a system page boundary. +.IP +Modifying +.B M_TOP_PAD +is a trade-off between increasing the number of system calls +(when the parameter is set low) +and wasting unused memory at the top of the heap +(when the parameter is set high). +.IP +The default value for this parameter is 128*1024. +.\" DEFAULT_TOP_PAD in glibc source +.TP +.B M_TRIM_THRESHOLD +When the amount of contiguous free memory at the top of the heap +grows sufficiently large, +.BR free (3) +employs +.BR sbrk (2) +to release this memory back to the system. +(This can be useful in programs that continue to execute for +a long period after freeing a significant amount of memory.) +The +.B M_TRIM_THRESHOLD +parameter specifies the minimum size (in bytes) that +this block of memory must reach before +.BR sbrk (2) +is used to trim the heap. +.IP +The default value for this parameter is 128*1024. +Setting +.B M_TRIM_THRESHOLD +to \-1 disables trimming completely. +.IP +Modifying +.B M_TRIM_THRESHOLD +is a trade-off between increasing the number of system calls +(when the parameter is set low) +and wasting unused memory at the top of the heap +(when the parameter is set high). +.\" +.SS Environment variables +A number of environment variables can be defined +to modify some of the same parameters as are controlled by +.BR mallopt (). +Using these variables has the advantage that the source code +of the program need not be changed. +To be effective, these variables must be defined before the +first call to a memory-allocation function. +(If the same parameters are adjusted via +.BR mallopt (), +then the +.BR mallopt () +settings take precedence.) +For security reasons, +these variables are ignored in set-user-ID and set-group-ID programs. +.P +The environment variables are as follows +(note the trailing underscore at the end of the name of some variables): +.TP +.B MALLOC_ARENA_MAX +Controls the same parameter as +.BR mallopt () +.BR M_ARENA_MAX . +.TP +.B MALLOC_ARENA_TEST +Controls the same parameter as +.BR mallopt () +.BR M_ARENA_TEST . +.TP +.B MALLOC_CHECK_ +This environment variable controls the same parameter as +.BR mallopt () +.BR M_CHECK_ACTION . +If this variable is set to a nonzero value, +then a special implementation of the memory-allocation functions is used. +(This is accomplished using the +.BR malloc_hook (3) +feature.) +This implementation performs additional error checking, +but is slower +.\" On glibc 2.12/x86, a simple malloc()+free() loop is about 70% slower +.\" when MALLOC_CHECK_ was set. +than the standard set of memory-allocation functions. +(This implementation does not detect all possible errors; +memory leaks can still occur.) +.IP +The value assigned to this environment variable should be a single digit, +whose meaning is as described for +.BR M_CHECK_ACTION . +Any characters beyond the initial digit are ignored. +.IP +For security reasons, the effect of +.B MALLOC_CHECK_ +is disabled by default for set-user-ID and set-group-ID programs. +However, if the file +.I /etc/suid\-debug +exists (the content of the file is irrelevant), then +.B MALLOC_CHECK_ +also has an effect for set-user-ID and set-group-ID programs. +.TP +.B MALLOC_MMAP_MAX_ +Controls the same parameter as +.BR mallopt () +.BR M_MMAP_MAX . +.TP +.B MALLOC_MMAP_THRESHOLD_ +Controls the same parameter as +.BR mallopt () +.BR M_MMAP_THRESHOLD . +.TP +.B MALLOC_PERTURB_ +Controls the same parameter as +.BR mallopt () +.BR M_PERTURB . +.TP +.B MALLOC_TRIM_THRESHOLD_ +Controls the same parameter as +.BR mallopt () +.BR M_TRIM_THRESHOLD . +.TP +.B MALLOC_TOP_PAD_ +Controls the same parameter as +.BR mallopt () +.BR M_TOP_PAD . +.SH RETURN VALUE +On success, +.BR mallopt () +returns 1. +On error, it returns 0. +.SH ERRORS +On error, +.I errno +is +.I not +set. +.SH VERSIONS +A similar function exists on many System V derivatives, +but the range of values for +.I param +varies across systems. +The SVID defined options +.BR M_MXFAST , +.BR M_NLBLKS , +.BR M_GRAIN , +and +.BR M_KEEP , +but only the first of these is implemented in glibc. +.SH STANDARDS +None. +.SH HISTORY +glibc 2.0. +.SH BUGS +Specifying an invalid value for +.I param +does not generate an error. +.P +A calculation error within the glibc implementation means that +a call of the form: +.\" FIXME . This looks buggy: +.\" setting the M_MXFAST limit rounds up: (s + SIZE_SZ) & ~MALLOC_ALIGN_MASK) +.\" malloc requests are rounded up: +.\" (req) + SIZE_SZ + MALLOC_ALIGN_MASK) & ~MALLOC_ALIGN_MASK +.\" https://www.sourceware.org/bugzilla/show_bug.cgi?id=12129 +.P +.in +4n +.EX +mallopt(M_MXFAST, n) +.EE +.in +.P +does not result in fastbins being employed for all allocations of size up to +.IR n . +To ensure desired results, +.I n +should be rounded up to the next multiple greater than or equal to +.IR (2k+1)*sizeof(size_t) , +where +.I k +is an integer. +.\" Bins are multiples of 2 * sizeof(size_t) + sizeof(size_t) +.P +If +.BR mallopt () +is used to set +.BR M_PERTURB , +then, as expected, the bytes of allocated memory are initialized +to the complement of the byte in +.IR value , +and when that memory is freed, +the bytes of the region are initialized to the byte specified in +.IR value . +However, there is an +.RI off-by- sizeof(size_t) +error in the implementation: +.\" FIXME . https://www.sourceware.org/bugzilla/show_bug.cgi?id=12140 +instead of initializing precisely the block of memory +being freed by the call +.IR free(p) , +the block starting at +.I p+sizeof(size_t) +is initialized. +.SH EXAMPLES +The program below demonstrates the use of +.BR M_CHECK_ACTION . +If the program is supplied with an (integer) command-line argument, +then that argument is used to set the +.B M_CHECK_ACTION +parameter. +The program then allocates a block of memory, +and frees it twice (an error). +.P +The following shell session shows what happens when we run this program +under glibc, with the default value for +.BR M_CHECK_ACTION : +.P +.in +4n +.EX +$ \fB./a.out\fP +main(): returned from first free() call +*** glibc detected *** ./a.out: double free or corruption (top): 0x09d30008 *** +======= Backtrace: ========= +/lib/libc.so.6(+0x6c501)[0x523501] +/lib/libc.so.6(+0x6dd70)[0x524d70] +/lib/libc.so.6(cfree+0x6d)[0x527e5d] +\&./a.out[0x80485db] +/lib/libc.so.6(__libc_start_main+0xe7)[0x4cdce7] +\&./a.out[0x8048471] +======= Memory map: ======== +001e4000\-001fe000 r\-xp 00000000 08:06 1083555 /lib/libgcc_s.so.1 +001fe000\-001ff000 r\-\-p 00019000 08:06 1083555 /lib/libgcc_s.so.1 +[some lines omitted] +b7814000\-b7817000 rw\-p 00000000 00:00 0 +bff53000\-bff74000 rw\-p 00000000 00:00 0 [stack] +Aborted (core dumped) +.EE +.in +.P +The following runs show the results when employing other values for +.BR M_CHECK_ACTION : +.P +.in +4n +.EX +$ \fB./a.out 1\fP # Diagnose error and continue +main(): returned from first free() call +*** glibc detected *** ./a.out: double free or corruption (top): 0x09cbe008 *** +main(): returned from second free() call +$ \fB./a.out 2\fP # Abort without error message +main(): returned from first free() call +Aborted (core dumped) +$ \fB./a.out 0\fP # Ignore error and continue +main(): returned from first free() call +main(): returned from second free() call +.EE +.in +.P +The next run shows how to set the same parameter using the +.B MALLOC_CHECK_ +environment variable: +.P +.in +4n +.EX +$ \fBMALLOC_CHECK_=1 ./a.out\fP +main(): returned from first free() call +*** glibc detected *** ./a.out: free(): invalid pointer: 0x092c2008 *** +main(): returned from second free() call +.EE +.in +.SS Program source +\& +.\" SRC BEGIN (mallopt.c) +.EX +#include +#include +#include +\& +int +main(int argc, char *argv[]) +{ + char *p; +\& + if (argc > 1) { + if (mallopt(M_CHECK_ACTION, atoi(argv[1])) != 1) { + fprintf(stderr, "mallopt() failed"); + exit(EXIT_FAILURE); + } + } +\& + p = malloc(1000); + if (p == NULL) { + fprintf(stderr, "malloc() failed"); + exit(EXIT_FAILURE); + } +\& + free(p); + printf("%s(): returned from first free() call\en", __func__); +\& + free(p); + printf("%s(): returned from second free() call\en", __func__); +\& + exit(EXIT_SUCCESS); +} +.EE +.\" SRC END +.SH SEE ALSO +.ad l +.nh +.BR mmap (2), +.BR sbrk (2), +.BR mallinfo (3), +.BR malloc (3), +.BR malloc_hook (3), +.BR malloc_info (3), +.BR malloc_stats (3), +.BR malloc_trim (3), +.BR mcheck (3), +.BR mtrace (3), +.BR posix_memalign (3) -- cgit v1.2.3