From 7f3caba522f4d24764f29d83aa2de9198bb7f01c Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Fri, 24 May 2024 06:52:22 +0200 Subject: Adding upstream version 6.8. Signed-off-by: Daniel Baumann --- man4 | 1 + man4/cciss.4 | 385 --------------------- man4/console_codes.4 | 811 ------------------------------------------- man4/console_ioctl.4 | 2 - man4/cpuid.4 | 83 ----- man4/dsp56k.4 | 107 ------ man4/fd.4 | 232 ------------- man4/full.4 | 46 --- man4/fuse.4 | 535 ----------------------------- man4/hd.4 | 82 ----- man4/hpsa.4 | 240 ------------- man4/initrd.4 | 479 -------------------------- man4/intro.4 | 22 -- man4/kmem.4 | 1 - man4/lirc.4 | 423 ----------------------- man4/loop-control.4 | 1 - man4/loop.4 | 361 -------------------- man4/lp.4 | 137 -------- man4/mem.4 | 81 ----- man4/mouse.4 | 171 ---------- man4/msr.4 | 42 --- man4/null.4 | 52 --- man4/port.4 | 1 - man4/ptmx.4 | 1 - man4/pts.4 | 75 ---- man4/ram.4 | 28 -- man4/random.4 | 349 ------------------- man4/rtc.4 | 347 ------------------- man4/sd.4 | 117 ------- man4/sk98lin.4 | 580 ------------------------------- man4/smartpqi.4 | 496 --------------------------- man4/st.4 | 950 --------------------------------------------------- man4/tty.4 | 67 ---- man4/ttyS.4 | 33 -- man4/tty_ioctl.4 | 2 - man4/urandom.4 | 1 - man4/vcs.4 | 172 ---------- man4/vcsa.4 | 1 - man4/veth.4 | 86 ----- man4/wavelan.4 | 142 -------- man4/zero.4 | 1 - 41 files changed, 1 insertion(+), 7742 deletions(-) create mode 120000 man4 delete mode 100644 man4/cciss.4 delete mode 100644 man4/console_codes.4 delete mode 100644 man4/console_ioctl.4 delete mode 100644 man4/cpuid.4 delete mode 100644 man4/dsp56k.4 delete mode 100644 man4/fd.4 delete mode 100644 man4/full.4 delete mode 100644 man4/fuse.4 delete mode 100644 man4/hd.4 delete mode 100644 man4/hpsa.4 delete mode 100644 man4/initrd.4 delete mode 100644 man4/intro.4 delete mode 100644 man4/kmem.4 delete mode 100644 man4/lirc.4 delete mode 100644 man4/loop-control.4 delete mode 100644 man4/loop.4 delete mode 100644 man4/lp.4 delete mode 100644 man4/mem.4 delete mode 100644 man4/mouse.4 delete mode 100644 man4/msr.4 delete mode 100644 man4/null.4 delete mode 100644 man4/port.4 delete mode 100644 man4/ptmx.4 delete mode 100644 man4/pts.4 delete mode 100644 man4/ram.4 delete mode 100644 man4/random.4 delete mode 100644 man4/rtc.4 delete mode 100644 man4/sd.4 delete mode 100644 man4/sk98lin.4 delete mode 100644 man4/smartpqi.4 delete mode 100644 man4/st.4 delete mode 100644 man4/tty.4 delete mode 100644 man4/ttyS.4 delete mode 100644 man4/tty_ioctl.4 delete mode 100644 man4/urandom.4 delete mode 100644 man4/vcs.4 delete mode 100644 man4/vcsa.4 delete mode 100644 man4/veth.4 delete mode 100644 man4/wavelan.4 delete mode 100644 man4/zero.4 (limited to 'man4') diff --git a/man4 b/man4 new file mode 120000 index 0000000..3d09bbb --- /dev/null +++ b/man4 @@ -0,0 +1 @@ +man/man4 \ No newline at end of file diff --git a/man4/cciss.4 b/man4/cciss.4 deleted file mode 100644 index 6b6a6d1..0000000 --- a/man4/cciss.4 +++ /dev/null @@ -1,385 +0,0 @@ -'\" t -.\" Copyright (C) 2011, Hewlett-Packard Development Company, L.P. -.\" Written by Stephen M. Cameron -.\" -.\" SPDX-License-Identifier: GPL-2.0-only -.\" -.\" shorthand for double quote that works everywhere. -.ds q \N'34' -.TH cciss 4 2023-10-31 "Linux man-pages 6.7" -.SH NAME -cciss \- HP Smart Array block driver -.SH SYNOPSIS -.nf -modprobe cciss [ cciss_allow_hpsa=1 ] -.fi -.SH DESCRIPTION -.\" commit 253d2464df446456c0bba5ed4137a7be0b278aa8 -.BR Note : -This obsolete driver was removed in Linux 4.14, -as it is superseded by the -.BR hpsa (4) -driver in newer kernels. -.P -.B cciss -is a block driver for older HP Smart Array RAID controllers. -.SS Options -.IR "cciss_allow_hpsa=1" : -This option prevents the -.B cciss -driver from attempting to drive any controllers that the -.BR hpsa (4) -driver is capable of controlling, which is to say, the -.B cciss -driver is restricted by this option to the following controllers: -.P -.nf - Smart Array 5300 - Smart Array 5i - Smart Array 532 - Smart Array 5312 - Smart Array 641 - Smart Array 642 - Smart Array 6400 - Smart Array 6400 EM - Smart Array 6i - Smart Array P600 - Smart Array P400i - Smart Array E200i - Smart Array E200 - Smart Array E200i - Smart Array E200i - Smart Array E200i - Smart Array E500 -.fi -.SS Supported hardware -The -.B cciss -driver supports the following Smart Array boards: -.P -.nf - Smart Array 5300 - Smart Array 5i - Smart Array 532 - Smart Array 5312 - Smart Array 641 - Smart Array 642 - Smart Array 6400 - Smart Array 6400 U320 Expansion Module - Smart Array 6i - Smart Array P600 - Smart Array P800 - Smart Array E400 - Smart Array P400i - Smart Array E200 - Smart Array E200i - Smart Array E500 - Smart Array P700m - Smart Array P212 - Smart Array P410 - Smart Array P410i - Smart Array P411 - Smart Array P812 - Smart Array P712m - Smart Array P711m -.fi -.SS Configuration details -To configure HP Smart Array controllers, -use the HP Array Configuration Utility -(either -.BR hpacuxe (8) -or -.BR hpacucli (8)) -or the Offline ROM-based Configuration Utility (ORCA) -run from the Smart Array's option ROM at boot time. -.SH FILES -.SS Device nodes -The device naming scheme is as follows: -.P -Major numbers: -.IP -.TS -r r. -104 cciss0 -105 cciss1 -106 cciss2 -105 cciss3 -108 cciss4 -109 cciss5 -110 cciss6 -111 cciss7 -.TE -.P -Minor numbers: -.P -.EX - b7 b6 b5 b4 b3 b2 b1 b0 - |\-\-\-\-+\-\-\-\-| |\-\-\-\-+\-\-\-\-| - | | - | +\-\-\-\-\-\-\-\- Partition ID (0=wholedev, 1\-15 partition) - | - +\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\- Logical Volume number -.EE -.P -The device naming scheme is: -.TS -li l. -/dev/cciss/c0d0 Controller 0, disk 0, whole device -/dev/cciss/c0d0p1 Controller 0, disk 0, partition 1 -/dev/cciss/c0d0p2 Controller 0, disk 0, partition 2 -/dev/cciss/c0d0p3 Controller 0, disk 0, partition 3 -\& -/dev/cciss/c1d1 Controller 1, disk 1, whole device -/dev/cciss/c1d1p1 Controller 1, disk 1, partition 1 -/dev/cciss/c1d1p2 Controller 1, disk 1, partition 2 -/dev/cciss/c1d1p3 Controller 1, disk 1, partition 3 -.TE -.SS Files in /proc -The files -.I /proc/driver/cciss/cciss[0\-9]+ -contain information about -the configuration of each controller. -For example: -.P -.in +4n -.EX -$ \fBcd /proc/driver/cciss\fP -$ \fBls \-l\fP -total 0 --rw\-r\-\-r\-\- 1 root root 0 2010\-09\-10 10:38 cciss0 --rw\-r\-\-r\-\- 1 root root 0 2010\-09\-10 10:38 cciss1 --rw\-r\-\-r\-\- 1 root root 0 2010\-09\-10 10:38 cciss2 -$ \fBcat cciss2\fP -cciss2: HP Smart Array P800 Controller -Board ID: 0x3223103c -Firmware Version: 7.14 -IRQ: 16 -Logical drives: 1 -Current Q depth: 0 -Current # commands on controller: 0 -Max Q depth since init: 1 -Max # commands on controller since init: 2 -Max SG entries since init: 32 -Sequential access devices: 0 -\& -cciss/c2d0: 36.38GB RAID 0 -.EE -.in -.\" -.SS Files in /sys -.TP -.IR /sys/bus/pci/devices/ dev /cciss X /c X d Y /model -Displays the SCSI INQUIRY page 0 model for logical drive -.I Y -of controller -.IR X . -.TP -.IR /sys/bus/pci/devices/ dev /cciss X /c X d Y /rev -Displays the SCSI INQUIRY page 0 revision for logical drive -.I Y -of controller -.IR X . -.TP -.IR /sys/bus/pci/devices/ dev /cciss X /c X d Y /unique_id -Displays the SCSI INQUIRY page 83 serial number for logical drive -.I Y -of controller -.IR X . -.TP -.IR /sys/bus/pci/devices/ dev /cciss X /c X d Y /vendor -Displays the SCSI INQUIRY page 0 vendor for logical drive -.I Y -of controller -.IR X . -.TP -.IR /sys/bus/pci/devices/ dev /cciss X /c X d Y /block:cciss!c X d Y -A symbolic link to -.IR /sys/block/cciss!c X d Y. -.TP -.IR /sys/bus/pci/devices/ dev /cciss X /rescan -When this file is written to, the driver rescans the controller -to discover any new, removed, or modified logical drives. -.TP -.IR /sys/bus/pci/devices/ dev /cciss X /resettable -A value of 1 displayed in this file indicates that -the "reset_devices=1" kernel parameter (used by -.BR kdump ) -is honored by this controller. -A value of 0 indicates that the -"reset_devices=1" kernel parameter will not be honored. -Some models of Smart Array are not able to honor this parameter. -.TP -.IR /sys/bus/pci/devices/ dev /cciss X /c X d Y /lunid -Displays the 8-byte LUN ID used to address logical drive -.I Y -of controller -.IR X . -.TP -.IR /sys/bus/pci/devices/ dev /cciss X /c X d Y /raid_level -Displays the RAID level of logical drive -.I Y -of controller -.IR X . -.TP -.IR /sys/bus/pci/devices/ dev /cciss X /c X d Y /usage_count -Displays the usage count (number of opens) of logical drive -.I Y -of controller -.IR X . -.SS SCSI tape drive and medium changer support -SCSI sequential access devices and medium changer devices are supported and -appropriate device nodes are automatically created (e.g., -.IR /dev/st0 , -.IR /dev/st1 , -etc.; see -.BR st (4) -for more details.) -You must enable "SCSI tape drive support for Smart Array 5xxx" and -"SCSI support" in your kernel configuration to be able to use SCSI -tape drives with your Smart Array 5xxx controller. -.P -Additionally, note that the driver will not engage the SCSI core at -init time. -The driver must be directed to dynamically engage the SCSI core via the -.I /proc -filesystem entry, -which the "block" side of the driver creates as -.I /proc/driver/cciss/cciss* -at run time. -This is because at driver init time, -the SCSI core may not yet be initialized (because the driver is a block -driver) and attempting to register it with the SCSI core in such a case -would cause a hang. -This is best done via an initialization script -(typically in -.IR /etc/init.d , -but could vary depending on distribution). -For example: -.P -.in +4n -.EX -for x in /proc/driver/cciss/cciss[0\-9]* -do - echo "engage scsi" > $x -done -.EE -.in -.P -Once the SCSI core is engaged by the driver, it cannot be disengaged -(except by unloading the driver, if it happens to be linked as a module.) -.P -Note also that if no sequential access devices or medium changers are -detected, the SCSI core will not be engaged by the action of the above -script. -.SS Hot plug support for SCSI tape drives -Hot plugging of SCSI tape drives is supported, with some caveats. -The -.B cciss -driver must be informed that changes to the SCSI bus -have been made. -This may be done via the -.I /proc -filesystem. -For example: -.IP -echo "rescan" > /proc/scsi/cciss0/1 -.P -This causes the driver to: -.RS -.IP (1) 5 -query the adapter about changes to the -physical SCSI buses and/or fiber channel arbitrated loop, and -.IP (2) -make note of any new or removed sequential access devices -or medium changers. -.RE -.P -The driver will output messages indicating which -devices have been added or removed and the controller, bus, target, and -lun used to address each device. -The driver then notifies the SCSI midlayer -of these changes. -.P -Note that the naming convention of the -.I /proc -filesystem entries -contains a number in addition to the driver name -(e.g., "cciss0" -instead of just "cciss", which you might expect). -.P -Note: -.I Only -sequential access devices and medium changers are presented -as SCSI devices to the SCSI midlayer by the -.B cciss -driver. -Specifically, physical SCSI disk drives are -.I not -presented to the SCSI midlayer. -The only disk devices that are presented to the kernel are logical -drives that the array controller constructs from regions on -the physical drives. -The logical drives are presented to the block layer -(not to the SCSI midlayer). -It is important for the driver to prevent the kernel from accessing the -physical drives directly, since these drives are used by the array -controller to construct the logical drives. -.SS SCSI error handling for tape drives and medium changers -The Linux SCSI midlayer provides an error-handling protocol that -is initiated whenever a SCSI command fails to complete within a -certain amount of time (which can vary depending on the command). -The -.B cciss -driver participates in this protocol to some extent. -The normal protocol is a four-step process: -.IP (1) 5 -First, the device is told to abort the command. -.IP (2) -If that doesn't work, the device is reset. -.IP (3) -If that doesn't work, the SCSI bus is reset. -.IP (4) -If that doesn't work, the host bus adapter is reset. -.P -The -.B cciss -driver is a block -driver as well as a SCSI driver and only the tape drives and medium -changers are presented to the SCSI midlayer. -Furthermore, unlike more -straightforward SCSI drivers, disk I/O continues through the block -side during the SCSI error-recovery process. -Therefore, the -.B cciss -driver implements only the first two of these actions, -aborting the command, and resetting the device. -Note also that most tape drives will not oblige -in aborting commands, and sometimes it appears they will not even -obey a reset command, though in most circumstances they will. -If the command cannot be aborted and the device cannot be -reset, the device will be set offline. -.P -In the event that the error-handling code is triggered and a tape drive is -successfully reset or the tardy command is successfully aborted, the -tape drive may still not allow I/O to continue until some command -is issued that positions the tape to a known position. -Typically you must rewind the tape (by issuing -.I "mt \-f /dev/st0 rewind" -for example) before I/O can proceed again to a tape drive that was reset. -.SH SEE ALSO -.BR hpsa (4), -.BR cciss_vol_status (8), -.BR hpacucli (8), -.BR hpacuxe (8) -.P -.UR http://cciss.sf.net -.UE , -and -.I Documentation/blockdev/cciss.txt -and -.I Documentation/ABI/testing/sysfs\-bus\-pci\-devices\-cciss -in the Linux kernel source tree -.\" .SH AUTHORS -.\" Don Brace, Steve Cameron, Chase Maupin, Mike Miller, Michael Ni, -.\" Charles White, Francis Wiran -.\" and probably some other people. diff --git a/man4/console_codes.4 b/man4/console_codes.4 deleted file mode 100644 index afc8c70..0000000 --- a/man4/console_codes.4 +++ /dev/null @@ -1,811 +0,0 @@ -'\" t -.\" Copyright (c) 1996 Andries Brouwer , Mon Oct 31 22:13:04 1996 -.\" -.\" SPDX-License-Identifier: GPL-2.0-or-later -.\" -.\" This is combined from many sources. -.\" For Linux, the definitive source is of course console.c. -.\" About vt100-like escape sequences in general there are -.\" the ISO/IEC 6429 and ISO/IEC 2022 norms, the descriptions of -.\" an actual vt100, and the xterm docs (ctlseqs.ms). -.\" Substantial portions of this text are derived from a write-up -.\" by Eric S. Raymond . -.\" -.\" Tiny correction, aeb, 961107. -.\" -.\" 2006-05-27, Several corrections - Thomas E. Dickey -.\" -.TH console_codes 4 2024-01-28 "Linux man-pages 6.7" -.SH NAME -console_codes \- Linux console escape and control sequences -.SH DESCRIPTION -The Linux console implements a large subset of -the VT102 and ECMA-48 / ISO/IEC\~6429 / ANSI X3.64 terminal controls, -plus certain private-mode sequences -for changing the color palette, character-set mapping, and so on. -In the tabular descriptions below, the second column gives ECMA-48 or DEC -mnemonics (the latter if prefixed with DEC) for the given function. -Sequences without a mnemonic are neither ECMA-48 nor VT102. -.P -After all the normal output processing has been done, and a -stream of characters arrives at the console driver for actual -printing, the first thing that happens is a translation from -the code used for processing to the code used for printing. -.P -If the console is in UTF-8 mode, then the incoming bytes are -first assembled into 16-bit Unicode codes. -Otherwise, each byte is transformed according to the current mapping table -(which translates it to a Unicode value). -See the \fBCharacter Sets\fP section below for discussion. -.P -In the normal case, the Unicode value is converted to a font index, -and this is stored in video memory, so that the corresponding glyph -(as found in video ROM) appears on the screen. -Note that the use of Unicode (and the design of the PC hardware) -allows us to use 512 different glyphs simultaneously. -.P -If the current Unicode value is a control character, or we are -currently processing an escape sequence, the value will treated -specially. -Instead of being turned into a font index and rendered as -a glyph, it may trigger cursor movement or other control functions. -See the \fBLinux Console Controls\fP section below for discussion. -.P -It is generally not good practice to hard-wire terminal controls into -programs. -Linux supports a -.BR terminfo (5) -database of terminal capabilities. -Rather than emitting console escape sequences by hand, you will almost -always want to use a terminfo-aware screen library or utility such as -.BR ncurses (3), -.BR tput (1), -or -.BR reset (1). -.SS Linux console controls -This section describes all the control characters and escape sequences -that invoke special functions (i.e., anything other than writing a -glyph at the current cursor location) on the Linux console. -.P -.B "Control characters" -.P -A character is a control character if (before transformation -according to the mapping table) it has one of the 14 codes -00 (NUL), 07 (BEL), 08 (BS), 09 (HT), 0a (LF), 0b (VT), -0c (FF), 0d (CR), 0e (SO), 0f (SI), 18 (CAN), 1a (SUB), -1b (ESC), 7f (DEL). -One can set a "display control characters" mode (see below), -and allow 07, 09, 0b, 18, 1a, 7f to be displayed as glyphs. -On the other hand, in UTF-8 mode all codes 00\[en]1f are regarded -as control characters, regardless of any "display control characters" -mode. -.P -If we have a control character, it is acted upon immediately -and then discarded (even in the middle of an escape sequence) -and the escape sequence continues with the next character. -(However, ESC starts a new escape sequence, possibly aborting a previous -unfinished one, and CAN and SUB abort any escape sequence.) -The recognized control characters are BEL, BS, HT, LF, VT, FF, -CR, SO, SI, CAN, SUB, ESC, DEL, CSI. -They do what one would expect: -.TP -BEL (0x07, \fB\[ha]G\fP) -beeps; -.TP -BS (0x08, \fB\[ha]H\fP) -backspaces one column -(but not past the beginning of the line); -.TP -HT (0x09, \fB\[ha]I\fP) -goes to the next tab stop or to the end of the line -if there is no earlier tab stop; -.TP -LF (0x0A, \fB\[ha]J\fP) -.TQ -VT (0x0B, \fB\[ha]K\fP) -.TQ -FF (0x0C, \fB\[ha]L\fP) -all give a linefeed, -and if LF/NL (new-line mode) is set also a carriage return; -.TP -CR (0x0D, \fB\[ha]M\fP) -gives a carriage return; -.TP -SO (0x0E, \fB\[ha]N\fP) -activates the G1 character set; -.TP -SI (0x0F, \fB\[ha]O\fP) -activates the G0 character set; -.TP -CAN (0x18, \fB\[ha]X\fP) -.TQ -SUB (0x1A, \fB\[ha]Z\fP) -abort escape sequences; -.TP -ESC (0x1B, \fB\[ha][\fP) -starts an escape sequence; -.TP -DEL (0x7F) -is ignored; -.TP -CSI (0x9B) -is equivalent to ESC [. -.P -.B "ESC- but not CSI-sequences" -.ad l -.TS -l l lx. -ESC c RIS Reset. -ESC D IND Linefeed. -ESC E NEL Newline. -ESC H HTS Set tab stop at current column. -ESC M RI Reverse linefeed. -ESC Z DECID T{ -DEC private identification. The kernel -returns the string ESC [ ? 6 c, claiming -that it is a VT102. -T} -ESC 7 DECSC T{ -Save current state (cursor coordinates, -attributes, character sets pointed at by G0, G1). -T} -ESC 8 DECRC T{ -Restore state most recently saved by ESC 7. -T} -ESC % Start sequence selecting character set -ESC % @ \0\0\0Select default (ISO/IEC\~646 / ISO/IEC\~8859-1) -ESC % G \0\0\0Select UTF-8 -ESC % 8 \0\0\0Select UTF-8 (obsolete) -ESC # 8 DECALN T{ -DEC screen alignment test \- fill screen with E's. -T} -ESC ( T{ -Start sequence defining G0 character set -(followed by one of B, 0, U, K, as below) -T} -ESC ( B T{ -Select default (ISO/IEC\~8859-1 mapping). -T} -ESC ( 0 T{ -Select VT100 graphics mapping. -T} -ESC ( U T{ -Select null mapping \- straight to character ROM. -T} -ESC ( K T{ -Select user mapping \- the map that is loaded by the utility \fBmapscrn\fP(8). -T} -ESC ) T{ -Start sequence defining G1 (followed by one of B, 0, U, K, as above). -T} -ESC > DECPNM Set numeric keypad mode -ESC = DECPAM Set application keypad mode -ESC ] OSC T{ -Operating System Command prefix. -T} -ESC ] R Reset palette. -ESC ] P T{ -Set palette, with parameter given in 7 hexadecimal digits \fInrrggbb\fP after -the final P. Here \fIn\fP is the color (0\[en]15), and \fIrrggbb\fP indicates -the red/green/blue values (0\[en]255). -T} -.TE -.ad -.P -.B "ECMA-48 CSI sequences" -.P -CSI (or ESC [) is followed by a sequence of parameters, -at most NPAR (16), that are decimal numbers separated by -semicolons. -An empty or absent parameter is taken to be 0. -The sequence of parameters may be preceded by a single question mark. -.P -However, after CSI [ (or ESC [ [) a single character is read -and this entire sequence is ignored. -(The idea is to ignore an echoed function key.) -.P -The action of a CSI sequence is determined by its final character. -.ad l -.TS -l l lx. -@ ICH T{ -Insert the indicated # of blank characters. -T} -A CUU T{ -Move cursor up the indicated # of rows. -T} -B CUD T{ -Move cursor down the indicated # of rows. -T} -C CUF T{ -Move cursor right the indicated # of columns. -T} -D CUB T{ -Move cursor left the indicated # of columns. -T} -E CNL T{ -Move cursor down the indicated # of rows, to column 1. -T} -F CPL T{ -Move cursor up the indicated # of rows, to column 1. -T} -G CHA T{ -Move cursor to indicated column in current row. -T} -H CUP T{ -Move cursor to the indicated row, column (origin at 1,1). -T} -J ED T{ -Erase display (default: from cursor to end of display). -T} - T{ -ESC [ 1 J: erase from start to cursor. -T} - T{ -ESC [ 2 J: erase whole display. -T} - T{ -ESC [ 3 J: erase whole display including scroll-back -buffer (since Linux 3.0). -T} -.\" ESC [ 3 J: commit f8df13e0a901fe55631fed66562369b4dba40f8b -K EL T{ -Erase line (default: from cursor to end of line). -T} - T{ -ESC [ 1 K: erase from start of line to cursor. -T} - T{ -ESC [ 2 K: erase whole line. -T} -L IL T{ -Insert the indicated # of blank lines. -T} -M DL T{ -Delete the indicated # of lines. -T} -P DCH T{ -Delete the indicated # of characters on current line. -T} -X ECH T{ -Erase the indicated # of characters on current line. -T} -a HPR T{ -Move cursor right the indicated # of columns. -T} -c DA T{ -Answer ESC [ ? 6 c: "I am a VT102". -T} -d VPA T{ -Move cursor to the indicated row, current column. -T} -e VPR T{ -Move cursor down the indicated # of rows. -T} -f HVP T{ -Move cursor to the indicated row, column. -T} -g TBC T{ -Without parameter: clear tab stop at current position. -T} - T{ -ESC [ 3 g: delete all tab stops. -T} -h SM Set Mode (see below). -l RM Reset Mode (see below). -m SGR Set attributes (see below). -n DSR Status report (see below). -q DECLL Set keyboard LEDs. - ESC [ 0 q: clear all LEDs - ESC [ 1 q: set Scroll Lock LED - ESC [ 2 q: set Num Lock LED - ESC [ 3 q: set Caps Lock LED -r DECSTBM T{ -Set scrolling region; parameters are top and bottom row. -T} -s ? Save cursor location. -u ? Restore cursor location. -\` HPA T{ -Move cursor to indicated column in current row. -T} -.TE -.ad -.P -.B ECMA-48 Select Graphic Rendition -.P -The ECMA-48 SGR sequence ESC [ \fIparameters\fP m sets display -attributes. -Several attributes can be set in the same sequence, separated by -semicolons. -An empty parameter (between semicolons or string initiator or -terminator) is interpreted as a zero. -.ad l -.TS -l lx. -param result -0 T{ -reset all attributes to their defaults -T} -1 set bold -2 T{ -set half-bright (simulated with color on a color display) -T} -3 set italic (since Linux 2.6.22; simulated with color on a color display) -4 T{ -set underscore (simulated with color on a color display) -(the colors used to simulate dim or underline are set -using ESC ] ...) -T} -5 set blink -7 set reverse video -10 T{ -reset selected mapping, display control flag, -and toggle meta flag (ECMA-48 says "primary font"). -T} -11 T{ -select null mapping, set display control flag, -reset toggle meta flag (ECMA-48 says "first alternate font"). -T} -12 T{ -select null mapping, set display control flag, -set toggle meta flag (ECMA-48 says "second alternate font"). -The toggle meta flag -causes the high bit of a byte to be toggled -before the mapping table translation is done. -T} -21 T{ -set underline; before Linux 4.17, this value -set normal intensity (as is done in many other terminals) -T} -22 set normal intensity -23 italic off (since Linux 2.6.22) -24 underline off -25 blink off -27 reverse video off -30 set black foreground -31 set red foreground -32 set green foreground -33 set brown foreground -34 set blue foreground -35 set magenta foreground -36 set cyan foreground -37 set white foreground -38 T{ -256/24-bit foreground color follows, shoehorned into 16 basic colors -(before Linux 3.16: set underscore on, set default foreground color) -T} -39 T{ -set default foreground color -(before Linux 3.16: set underscore off, set default foreground color) -T} -40 set black background -41 set red background -42 set green background -43 set brown background -44 set blue background -45 set magenta background -46 set cyan background -47 set white background -48 T{ -256/24-bit background color follows, shoehorned into 8 basic colors -T} -49 set default background color -90..97 T{ -set foreground to bright versions of 30..37 -T} -100..107 T{ -set background, same as 40..47 (bright not supported) -T} -.TE -.ad -.P -Commands 38 and 48 require further arguments: -.TS -l lx. -;5;x T{ -256 color: values 0..15 are IBGR (black, red, green, ... white), -16..231 a 6x6x6 color cube, 232..255 a grayscale ramp -T} -;2;r;g;b T{ -24-bit color, r/g/b components are in the range 0..255 -T} -.TE -.P -.B ECMA-48 Mode Switches -.TP -ESC [ 3 h -DECCRM (default off): Display control chars. -.TP -ESC [ 4 h -DECIM (default off): Set insert mode. -.TP -ESC [ 20 h -LF/NL (default off): Automatically follow echo of LF, VT, or FF with CR. -.\" -.P -.B ECMA-48 Status Report Commands -.\" -.TP -ESC [ 5 n -Device status report (DSR): Answer is ESC [ 0 n (Terminal OK). -.TP -ESC [ 6 n -Cursor position report (CPR): Answer is ESC [ \fIy\fP ; \fIx\fP R, -where \fIx,y\fP is the cursor location. -.\" -.P -.B DEC Private Mode (DECSET/DECRST) sequences -.P -.\" -These are not described in ECMA-48. -We list the Set Mode sequences; -the Reset Mode sequences are obtained by replacing the final \[aq]h\[aq] -by \[aq]l\[aq]. -.TP -ESC [ ? 1 h -DECCKM (default off): When set, the cursor keys send an ESC O prefix, -rather than ESC [. -.TP -ESC [ ? 3 h -DECCOLM (default off = 80 columns): 80/132 col mode switch. -The driver sources note that this alone does not suffice; some user-mode -utility such as -.BR resizecons (8) -has to change the hardware registers on the console video card. -.TP -ESC [ ? 5 h -DECSCNM (default off): Set reverse-video mode. -.TP -ESC [ ? 6 h -DECOM (default off): When set, cursor addressing is relative to -the upper left corner of the scrolling region. -.TP -ESC [ ? 7 h -DECAWM (default on): Set autowrap on. -In this mode, a graphic -character emitted after column 80 (or column 132 of DECCOLM is on) -forces a wrap to the beginning of the following line first. -.TP -ESC [ ? 8 h -DECARM (default on): Set keyboard autorepeat on. -.TP -ESC [ ? 9 h -X10 Mouse Reporting (default off): Set reporting mode to 1 (or reset to -0)\[em]see below. -.TP -ESC [ ? 25 h -DECTECM (default on): Make cursor visible. -.TP -ESC [ ? 1000 h -X11 Mouse Reporting (default off): Set reporting mode to 2 (or reset -to 0)\[em]see below. -.\" -.P -.B Linux Console Private CSI Sequences -.P -.\" -The following sequences are neither ECMA-48 nor native VT102. -They are native to the Linux console driver. -Colors are in SGR parameters: -0 = black, 1 = red, 2 = green, 3 = brown, 4 = blue, 5 = magenta, 6 = -cyan, 7 = white; 8\[en]15 = bright versions of 0\[en]7. -.TS -l lx. -ESC [ 1 ; \fIn\fP ] T{ -Set color \fIn\fP as the underline color. -T} -ESC [ 2 ; \fIn\fP ] T{ -Set color \fIn\fP as the dim color. -T} -ESC [ 8 ] T{ -Make the current color pair the default attributes. -T} -ESC [ 9 ; \fIn\fP ] T{ -Set screen blank timeout to \fIn\fP minutes. -T} -ESC [ 10 ; \fIn\fP ] T{ -Set bell frequency in Hz. -T} -ESC [ 11 ; \fIn\fP ] T{ -Set bell duration in msec. -T} -ESC [ 12 ; \fIn\fP ] T{ -Bring specified console to the front. -T} -ESC [ 13 ] T{ -Unblank the screen. -T} -ESC [ 14 ; \fIn\fP ] T{ -Set the VESA powerdown interval in minutes. -T} -ESC [ 15 ] T{ -Bring the previous console to the front -(since Linux 2.6.0). -T} -ESC [ 16 ; \fIn\fP ] T{ -Set the cursor blink interval in milliseconds -(since Linux 4.2). -T} -.\" commit bd63364caa8df38bad2b25b11b2a1b849475cce5 -.TE -.SS Character sets -The kernel knows about 4 translations of bytes into console-screen -symbols. -The four tables are: a) Latin1 \-> PC, -b) VT100 graphics \-> PC, c) PC \-> PC, d) user-defined. -.P -There are two character sets, called G0 and G1, and one of them -is the current character set. -(Initially G0.) -Typing \fB\[ha]N\fP causes G1 to become current, -\fB\[ha]O\fP causes G0 to become current. -.P -These variables G0 and G1 point at a translation table, and can be -changed by the user. -Initially they point at tables a) and b), respectively. -The sequences ESC ( B and ESC ( 0 and ESC ( U and ESC ( K cause G0 to -point at translation table a), b), c), and d), respectively. -The sequences ESC ) B and ESC ) 0 and ESC ) U and ESC ) K cause G1 to -point at translation table a), b), c), and d), respectively. -.P -The sequence ESC c causes a terminal reset, which is what you want if the -screen is all garbled. -The oft-advised "echo \[ha]V\[ha]O" will make only G0 current, -but there is no guarantee that G0 points at table a). -In some distributions there is a program -.BR reset (1) -that just does "echo \[ha][c". -If your terminfo entry for the console is correct -(and has an entry rs1=\eEc), then "tput reset" will also work. -.P -The user-defined mapping table can be set using -.BR mapscrn (8). -The result of the mapping is that if a symbol c is printed, the symbol -s = map[c] is sent to the video memory. -The bitmap that corresponds to -s is found in the character ROM, and can be changed using -.BR setfont (8). -.SS Mouse tracking -The mouse tracking facility is intended to return -.BR xterm (1)-compatible -mouse status reports. -Because the console driver has no way to know -the device or type of the mouse, these reports are returned in the -console input stream only when the virtual terminal driver receives -a mouse update ioctl. -These ioctls must be generated by a mouse-aware -user-mode application such as the -.BR gpm (8) -daemon. -.P -The mouse tracking escape sequences generated by -\fBxterm\fP(1) encode numeric parameters in a single character as -\fIvalue\fP+040. -For example, \[aq]!\[aq] is 1. -The screen coordinate system is 1-based. -.P -The X10 compatibility mode sends an escape sequence on button press -encoding the location and the mouse button pressed. -It is enabled by sending ESC [ ? 9 h and disabled with ESC [ ? 9 l. -On button press, \fBxterm\fP(1) sends -ESC [ M \fIbxy\fP (6 characters). -Here \fIb\fP is button\-1, -and \fIx\fP and \fIy\fP are the x and y coordinates of the mouse -when the button was pressed. -This is the same code the kernel also produces. -.P -Normal tracking mode (not implemented in Linux 2.0.24) sends an escape -sequence on both button press and release. -Modifier information is also sent. -It is enabled by sending ESC [ ? 1000 h and disabled with -ESC [ ? 1000 l. -On button press or release, \fBxterm\fP(1) sends ESC [ M -\fIbxy\fP. -The low two bits of \fIb\fP encode button information: -0=MB1 pressed, 1=MB2 pressed, 2=MB3 pressed, 3=release. -The upper bits encode what modifiers were down when the button was -pressed and are added together: 4=Shift, 8=Meta, 16=Control. -Again \fIx\fP and -\fIy\fP are the x and y coordinates of the mouse event. -The upper left corner is (1,1). -.SS Comparisons with other terminals -Many different terminal types are described, like the Linux console, -as being "VT100-compatible". -Here we discuss differences between the -Linux console and the two most important others, the DEC VT102 and -.BR xterm (1). -.\" -.P -.B Control-character handling -.P -The VT102 also recognized the following control characters: -.TP -NUL (0x00) -was ignored; -.TP -ENQ (0x05) -triggered an answerback message; -.TP -DC1 (0x11, \fB\[ha]Q\fP, XON) -resumed transmission; -.TP -DC3 (0x13, \fB\[ha]S\fP, XOFF) -caused VT100 to ignore (and stop transmitting) -all codes except XOFF and XON. -.P -VT100-like DC1/DC3 processing may be enabled by the terminal driver. -.P -The -.BR xterm (1) -program (in VT100 mode) recognizes the control characters -BEL, BS, HT, LF, VT, FF, CR, SO, SI, ESC. -.\" -.P -.B Escape sequences -.P -VT100 console sequences not implemented on the Linux console: -.TS -l l l. -ESC N SS2 T{ -Single shift 2. (Select G2 character set for the next character only.) -T} -ESC O SS3 T{ -Single shift 3. (Select G3 character set for the next character only.) -T} -ESC P DCS T{ -Device control string (ended by ESC \e) -T} -ESC X SOS Start of string. -ESC \[ha] PM Privacy message (ended by ESC \e) -ESC \e ST String terminator -ESC * ... Designate G2 character set -ESC + ... Designate G3 character set -.TE -.P -The program -.BR xterm (1) -(in VT100 mode) recognizes ESC c, ESC # 8, ESC >, ESC =, -ESC D, ESC E, ESC H, ESC M, ESC N, ESC O, ESC P ... ESC \e, -ESC Z (it answers ESC [ ? 1 ; 2 c, "I am a VT100 with -advanced video option") -and ESC \[ha] ... ESC \e with the same meanings as indicated above. -It accepts ESC (, ESC ), ESC *, ESC + followed by 0, A, B for -the DEC special character and line drawing set, UK, and US-ASCII, -respectively. -.P -The user can configure \fBxterm\fP(1) to respond to VT220-specific -control sequences, and it will identify itself as a VT52, VT100, and -up depending on the way it is configured and initialized. -.P -It accepts ESC ] (OSC) for the setting of certain resources. -In addition to the ECMA-48 string terminator (ST), -\fBxterm\fP(1) accepts a BEL to terminate an OSC string. -These are a few of the OSC control sequences recognized by \fBxterm\fP(1): -.TS -l l. -ESC ] 0 ; \fItxt\fP ST T{ -Set icon name and window title to \fItxt\fP. -T} -ESC ] 1 ; \fItxt\fP ST Set icon name to \fItxt\fP. -ESC ] 2 ; \fItxt\fP ST Set window title to \fItxt\fP. -ESC ] 4 ; \fInum\fP; \fItxt\fP ST Set ANSI color \fInum\fP to \fItxt\fP. -ESC ] 10 ; \fItxt\fP ST Set dynamic text color to \fItxt\fP. -ESC ] 4 6 ; \fIname\fP ST T{ -Change log file to \fIname\fP (normally disabled by a compile-time option). -T} -ESC ] 5 0 ; \fIfn\fP ST Set font to \fIfn\fP. -.TE -.P -It recognizes the following with slightly modified meaning -(saving more state, behaving closer to VT100/VT220): -.TS -l l l. -ESC 7 DECSC Save cursor -ESC 8 DECRC Restore cursor -.TE -.P -It also recognizes -.TS -l l lx. -ESC F T{ -Cursor to lower left corner of screen (if enabled -by \fBxterm\fP(1)'s \fBhpLowerleftBugCompat\fP resource). -T} -ESC l Memory lock (per HP terminals). - Locks memory above the cursor. -ESC m Memory unlock (per HP terminals). -ESC n LS2 Invoke the G2 character set. -ESC o LS3 Invoke the G3 character set. -ESC | LS3R Invoke the G3 character set as GR. -ESC } LS2R Invoke the G2 character set as GR. -ESC \[ti] LS1R Invoke the G1 character set as GR. -.TE -.P -It also recognizes ESC % and provides a more complete UTF-8 -implementation than Linux console. -.\" -.P -.B CSI Sequences -.P -Old versions of \fBxterm\fP(1), for example, from X11R5, -interpret the blink SGR as a bold SGR. -Later versions which implemented ANSI colors, for example, -XFree86 3.1.2A in 1995, improved this by allowing -the blink attribute to be displayed as a color. -Modern versions of xterm implement blink SGR as blinking text -and still allow colored text as an alternate rendering of SGRs. -Stock X11R6 versions did not recognize the color-setting SGRs until -the X11R6.8 release, which incorporated XFree86 xterm. -All ECMA-48 CSI sequences recognized by Linux are also recognized by -.IR xterm , -however \fBxterm\fP(1) implements several ECMA-48 and DEC control sequences -not recognized by Linux. -.P -The \fBxterm\fP(1) -program recognizes all of the DEC Private Mode sequences listed -above, but none of the Linux private-mode sequences. -For discussion of \fBxterm\fP(1)'s -own private-mode sequences, refer to the -\fIXterm Control Sequences\fP -document by -Edward Moy, -Stephen Gildea, -and Thomas E.\& Dickey -available with the X distribution. -That document, though terse, is much longer than this manual page. -For a chronological overview, -.P -.RS -.UR http://invisible\-island.net\:/xterm\:/xterm.log.html -.UE -.RE -.P -details changes to xterm. -.P -The \fIvttest\fP program -.P -.RS -.UR http://invisible\-island.net\:/vttest/ -.UE -.RE -.P -demonstrates many of these control sequences. -The \fBxterm\fP(1) source distribution also contains sample -scripts which exercise other features. -.SH NOTES -ESC 8 (DECRC) is not able to restore the character set changed with -ESC %. -.SH BUGS -In Linux 2.0.23, CSI is broken, and NUL is not ignored inside -escape sequences. -.P -Some older kernel versions (after Linux 2.0) interpret 8-bit control -sequences. -These "C1 controls" use codes between 128 and 159 to replace -ESC [, ESC ] and similar two-byte control sequence initiators. -There are fragments of that in modern kernels (either overlooked or -broken by changes to support UTF-8), -but the implementation is incomplete and should be regarded -as unreliable. -.P -Linux "private mode" sequences do not follow the rules in ECMA-48 -for private mode control sequences. -In particular, those ending with ] do not use a standard terminating -character. -The OSC (set palette) sequence is a greater problem, -since \fBxterm\fP(1) may interpret this as a control sequence -which requires a string terminator (ST). -Unlike the \fBsetterm\fP(1) sequences which will be ignored (since -they are invalid control sequences), the palette sequence will make -\fBxterm\fP(1) appear to hang (though pressing the return-key -will fix that). -To accommodate applications which have been hardcoded to use Linux -control sequences, -set the \fBxterm\fP(1) resource \fBbrokenLinuxOSC\fP to true. -.P -An older version of this document implied that Linux recognizes the -ECMA-48 control sequence for invisible text. -It is ignored. -.SH SEE ALSO -.BR ioctl_console (2), -.BR charsets (7) diff --git a/man4/console_ioctl.4 b/man4/console_ioctl.4 deleted file mode 100644 index 5dfc68d..0000000 --- a/man4/console_ioctl.4 +++ /dev/null @@ -1,2 +0,0 @@ -.so man2/ioctl_console.2 -.\" Link for old name of this page diff --git a/man4/cpuid.4 b/man4/cpuid.4 deleted file mode 100644 index e58e29e..0000000 --- a/man4/cpuid.4 +++ /dev/null @@ -1,83 +0,0 @@ -.\" Copyright (c) 2009 Intel Corporation, Author Andi Kleen -.\" Description based on comments in arch/x86/kernel/cpuid.c -.\" -.\" SPDX-License-Identifier: Linux-man-pages-copyleft -.\" -.TH cpuid 4 2024-01-05 "Linux man-pages 6.7" -.SH NAME -cpuid \- x86 CPUID access device -.SH DESCRIPTION -CPUID provides an interface for querying information about the x86 CPU. -.P -This device is accessed by -.BR lseek (2) -or -.BR pread (2) -to the appropriate CPUID level and reading in chunks of 16 bytes. -A larger read size means multiple reads of consecutive levels. -.P -The lower 32 bits of the file position is used as the incoming -.IR %eax , -and the upper 32 bits of the file position as the incoming -.IR %ecx , -the latter is intended for "counting" -.I eax -levels like -.IR eax=4 . -.P -This driver uses -.IR /dev/cpu/CPUNUM/cpuid , -where -.I CPUNUM -is the minor number, -and on an SMP box will direct the access to CPU -.I CPUNUM -as listed in -.IR /proc/cpuinfo . -.P -This file is protected so that it can be read only by the user -.IR root , -or members of the group -.IR root . -.SH NOTES -The CPUID instruction can be directly executed by a program -using inline assembler. -However this device allows convenient -access to all CPUs without changing process affinity. -.P -Most of the information in -.I cpuid -is reported by the kernel in cooked form either in -.I /proc/cpuinfo -or through subdirectories in -.IR /sys/devices/system/cpu . -Direct CPUID access through this device should only -be used in exceptional cases. -.P -The -.I cpuid -driver is not auto-loaded. -On modular kernels you might need to use the following command -to load it explicitly before use: -.P -.in +4n -.EX -$ modprobe cpuid -.EE -.in -.P -There is no support for CPUID functions that require additional -input registers. -.P -Early i486 CPUs do not support the CPUID instruction; -.\" arch/x86/kernel/cpuid.c cpuid_open() -opening this device for those CPUs fails with EIO. -.SH SEE ALSO -.BR cpuid (1) -.P -Intel Corporation, Intel 64 and IA-32 Architectures -Software Developer's Manual Volume 2A: -Instruction Set Reference, A-M, 3-180 CPUID reference. -.P -Intel Corporation, Intel Processor Identification and -the CPUID Instruction, Application note 485. diff --git a/man4/dsp56k.4 b/man4/dsp56k.4 deleted file mode 100644 index 36a856d..0000000 --- a/man4/dsp56k.4 +++ /dev/null @@ -1,107 +0,0 @@ -.\" Copyright (c) 2000 lars brinkhoff -.\" -.\" SPDX-License-Identifier: GPL-2.0-or-later -.\" -.\" Modified, Thu Jan 27 19:16:19 CET 2000, lars@nocrew.org -.\" -.TH dsp56k 4 2023-10-31 "Linux man-pages 6.7" -.SH NAME -dsp56k \- DSP56001 interface device -.SH SYNOPSIS -.nf -.B #include -.P -.BI "ssize_t read(int " fd ", void *" data ", size_t " length ); -.BI "ssize_t write(int " fd ", void *" data ", size_t " length ); -.P -.BI "int ioctl(int " fd ", DSP56K_UPLOAD, struct dsp56k_upload *" program ); -.BI "int ioctl(int " fd ", DSP56K_SET_TX_WSIZE, int " wsize ); -.BI "int ioctl(int " fd ", DSP56K_SET_RX_WSIZE, int " wsize ); -.BI "int ioctl(int " fd ", DSP56K_HOST_FLAGS, struct dsp56k_host_flags *" flags ); -.BI "int ioctl(int " fd ", DSP56K_HOST_CMD, int " cmd ); -.fi -.SH CONFIGURATION -The -.I dsp56k -device is a character device with major number 55 and minor -number 0. -.SH DESCRIPTION -The Motorola DSP56001 is a fully programmable 24-bit digital signal -processor found in Atari Falcon030-compatible computers. -The \fIdsp56k\fP special file is used to control the DSP56001, and -to send and receive data using the bidirectional handshaked host -port. -.P -To send a data stream to the signal processor, use -.BR write (2) -to the -device, and -.BR read (2) -to receive processed data. -The data can be sent or -received in 8, 16, 24, or 32-bit quantities on the host side, but will -always be seen as 24-bit quantities in the DSP56001. -.P -The following -.BR ioctl (2) -calls are used to control the -\fIdsp56k\fP device: -.TP -.B DSP56K_UPLOAD -resets the DSP56001 and uploads a program. -The third -.BR ioctl (2) -argument must be a pointer to a \fIstruct dsp56k_upload\fP with members -\fIbin\fP pointing to a DSP56001 binary program, and \fIlen\fP set to -the length of the program, counted in 24-bit words. -.TP -.B DSP56K_SET_TX_WSIZE -sets the transmit word size. -Allowed values are in the range 1 to 4, -and is the number of bytes that will be sent at a time to the -DSP56001. -These data quantities will either be padded with bytes containing zero, -or truncated to fit the native 24-bit data format of the -DSP56001. -.TP -.B DSP56K_SET_RX_WSIZE -sets the receive word size. -Allowed values are in the range 1 to 4, -and is the number of bytes that will be received at a time from the DSP56001. -These data quantities will either truncated, -or padded with a null byte (\[aq]\e0\[aq]), -to fit the native 24-bit data format of the DSP56001. -.TP -.B DSP56K_HOST_FLAGS -read and write the host flags. -The host flags are four -general-purpose bits that can be read by both the hosting computer and -the DSP56001. -Bits 0 and 1 can be written by the host, and bits 2 and -3 can be written by the DSP56001. -.IP -To access the host flags, the third -.BR ioctl (2) -argument must be a pointer -to a \fIstruct dsp56k_host_flags\fP. -If bit 0 or 1 is set in the -\fIdir\fP member, the corresponding bit in \fIout\fP will be written -to the host flags. -The state of all host flags will be returned in -the lower four bits of the \fIstatus\fP member. -.TP -.B DSP56K_HOST_CMD -sends a host command. -Allowed values are in the range 0 to 31, and is a -user-defined command handled by the program running in the DSP56001. -.SH FILES -.I /dev/dsp56k -.\" .SH AUTHORS -.\" Fredrik Noring , lars brinkhoff , -.\" Tomas Berndtsson . -.SH SEE ALSO -.IR linux/include/asm\-m68k/dsp56k.h , -.IR linux/drivers/char/dsp56k.c , -.UR http://dsp56k.nocrew.org/ -.UE , -DSP56000/DSP56001 Digital Signal Processor User's Manual diff --git a/man4/fd.4 b/man4/fd.4 deleted file mode 100644 index e1aaacb..0000000 --- a/man4/fd.4 +++ /dev/null @@ -1,232 +0,0 @@ -'\" t -.\" Copyright (c) 1993 Michael Haardt (michael@cantor.informatik.rwth-aachen.de) -.\" and 1994,1995 Alain Knaff (Alain.Knaff@imag.fr) -.\" -.\" SPDX-License-Identifier: GPL-2.0-or-later -.\" -.\" Modified, Sun Feb 26 15:00:02 1995, faith@cs.unc.edu -.\" -.TH fd 4 2023-10-31 "Linux man-pages 6.7" -.SH NAME -fd \- floppy disk device -.SH CONFIGURATION -Floppy drives are block devices with major number 2. -Typically they -are owned by -root:floppy -(i.e., user root, group floppy) and have -either mode 0660 (access checking via group membership) or mode 0666 -(everybody has access). -The minor -numbers encode the device type, drive number, and controller number. -For each device type (that is, combination of density and track count) -there is a base minor number. -To this base number, add the drive's -number on its controller and 128 if the drive is on the secondary -controller. -In the following device tables, \fIn\fP represents the -drive number. -.P -\fBWarning: if you use formats with more tracks -than supported by your drive, you may cause it mechanical damage.\fP -Trying once if more tracks than the usual 40/80 are supported should not -damage it, but no warranty is given for that. -If you are not sure, don't create device -entries for those formats, so as to prevent their usage. -.P -Drive-independent device files which automatically detect the media -format and capacity: -.TS -l c -l c. -Name Base - minor # -_ -\fBfd\fP\fIn\fP 0 -.TE -.P -5.25 inch double-density device files: -.TS -lw(1i) l l l l c -lw(1i) c c c c c. -Name Capacity Cyl. Sect. Heads Base - KiB minor # -_ -\fBfd\fP\fIn\fP\fBd360\fP 360 40 9 2 4 -.TE -.P -5.25 inch high-density device files: -.TS -lw(1i) l l l l c -lw(1i) c c c c c. -Name Capacity Cyl. Sect. Heads Base - KiB minor # -_ -\fBfd\fP\fIn\fP\fBh360\fP 360 40 9 2 20 -\fBfd\fP\fIn\fP\fBh410\fP 410 41 10 2 48 -\fBfd\fP\fIn\fP\fBh420\fP 420 42 10 2 64 -\fBfd\fP\fIn\fP\fBh720\fP 720 80 9 2 24 -\fBfd\fP\fIn\fP\fBh880\fP 880 80 11 2 80 -\fBfd\fP\fIn\fP\fBh1200\fP 1200 80 15 2 8 -\fBfd\fP\fIn\fP\fBh1440\fP 1440 80 18 2 40 -\fBfd\fP\fIn\fP\fBh1476\fP 1476 82 18 2 56 -\fBfd\fP\fIn\fP\fBh1494\fP 1494 83 18 2 72 -\fBfd\fP\fIn\fP\fBh1600\fP 1600 80 20 2 92 -.TE -.P -3.5 inch double-density device files: -.TS -lw(1i) l l l l c -lw(1i) c c c c c. -Name Capacity Cyl. Sect. Heads Base - KiB minor # -_ -\fBfd\fP\fIn\fP\fBu360\fP 360 80 9 1 12 -\fBfd\fP\fIn\fP\fBu720\fP 720 80 9 2 16 -\fBfd\fP\fIn\fP\fBu800\fP 800 80 10 2 120 -\fBfd\fP\fIn\fP\fBu1040\fP 1040 80 13 2 84 -\fBfd\fP\fIn\fP\fBu1120\fP 1120 80 14 2 88 -.TE -.P -3.5 inch high-density device files: -.TS -lw(1i) l l l l c -lw(1i) c c c c c. -Name Capacity Cyl. Sect. Heads Base - KiB minor # -_ -\fBfd\fP\fIn\fP\fBu360\fP 360 40 9 2 12 -\fBfd\fP\fIn\fP\fBu720\fP 720 80 9 2 16 -\fBfd\fP\fIn\fP\fBu820\fP 820 82 10 2 52 -\fBfd\fP\fIn\fP\fBu830\fP 830 83 10 2 68 -\fBfd\fP\fIn\fP\fBu1440\fP 1440 80 18 2 28 -\fBfd\fP\fIn\fP\fBu1600\fP 1600 80 20 2 124 -\fBfd\fP\fIn\fP\fBu1680\fP 1680 80 21 2 44 -\fBfd\fP\fIn\fP\fBu1722\fP 1722 82 21 2 60 -\fBfd\fP\fIn\fP\fBu1743\fP 1743 83 21 2 76 -\fBfd\fP\fIn\fP\fBu1760\fP 1760 80 22 2 96 -\fBfd\fP\fIn\fP\fBu1840\fP 1840 80 23 2 116 -\fBfd\fP\fIn\fP\fBu1920\fP 1920 80 24 2 100 -.TE -.P -3.5 inch extra-density device files: -.TS -lw(1i) l l l l c -lw(1i) c c c c c. -Name Capacity Cyl. Sect. Heads Base - KiB minor # -_ -\fBfd\fP\fIn\fP\fBu2880\fP 2880 80 36 2 32 -\fBfd\fP\fIn\fP\fBCompaQ\fP 2880 80 36 2 36 -\fBfd\fP\fIn\fP\fBu3200\fP 3200 80 40 2 104 -\fBfd\fP\fIn\fP\fBu3520\fP 3520 80 44 2 108 -\fBfd\fP\fIn\fP\fBu3840\fP 3840 80 48 2 112 -.TE -.SH DESCRIPTION -\fBfd\fP special files access the floppy disk drives in raw mode. -The following -.BR ioctl (2) -calls are supported by \fBfd\fP devices: -.TP -.B FDCLRPRM -clears the media information of a drive (geometry of disk in drive). -.TP -.B FDSETPRM -sets the media information of a drive. -The media information will be -lost when the media is changed. -.TP -.B FDDEFPRM -sets the media information of a drive (geometry of disk in drive). -The media information will not be lost when the media is changed. -This will disable autodetection. -In order to reenable autodetection, you -have to issue an \fBFDCLRPRM\fP. -.TP -.B FDGETDRVTYP -returns the type of a drive (name parameter). -For formats which work -in several drive types, \fBFDGETDRVTYP\fP returns a name which is -appropriate for the oldest drive type which supports this format. -.TP -.B FDFLUSH -invalidates the buffer cache for the given drive. -.TP -.B FDSETMAXERRS -sets the error thresholds for reporting errors, aborting the operation, -recalibrating, resetting, and reading sector by sector. -.TP -.B FDSETMAXERRS -gets the current error thresholds. -.TP -.B FDGETDRVTYP -gets the internal name of the drive. -.TP -.B FDWERRORCLR -clears the write error statistics. -.TP -.B FDWERRORGET -reads the write error statistics. -These include the total number of -write errors, the location and disk of the first write error, and the -location and disk of the last write error. -Disks are identified by a -generation number which is incremented at (almost) each disk change. -.TP -.B FDTWADDLE -Switch the drive motor off for a few microseconds. -This might be -needed in order to access a disk whose sectors are too close together. -.TP -.B FDSETDRVPRM -sets various drive parameters. -.TP -.B FDGETDRVPRM -reads these parameters back. -.TP -.B FDGETDRVSTAT -gets the cached drive state (disk changed, write protected et al.) -.TP -.B FDPOLLDRVSTAT -polls the drive and return its state. -.TP -.B FDGETFDCSTAT -gets the floppy controller state. -.TP -.B FDRESET -resets the floppy controller under certain conditions. -.TP -.B FDRAWCMD -sends a raw command to the floppy controller. -.P -For more precise information, consult also the \fI\fP and -\fI\fP include files, as well as the -.BR floppycontrol (1) -manual page. -.SH FILES -.I /dev/fd* -.SH NOTES -The various formats permit reading and writing many types of disks. -However, if a floppy is formatted with an inter-sector gap that is too small, -performance may drop, -to the point of needing a few seconds to access an entire track. -To prevent this, use interleaved formats. -.P -It is not possible to -read floppies which are formatted using GCR (group code recording), -which is used by Apple II and Macintosh computers (800k disks). -.P -Reading floppies which are hard sectored (one hole per sector, with -the index hole being a little skewed) is not supported. -This used to be common with older 8-inch floppies. -.\" .SH AUTHORS -.\" Alain Knaff (Alain.Knaff@imag.fr), David Niemi -.\" (niemidc@clark.net), Bill Broadhurst (bbroad@netcom.com). -.SH SEE ALSO -.BR chown (1), -.BR floppycontrol (1), -.BR getfdprm (1), -.BR mknod (1), -.BR superformat (1), -.BR mount (8), -.BR setfdprm (8) diff --git a/man4/full.4 b/man4/full.4 deleted file mode 100644 index 9d5289b..0000000 --- a/man4/full.4 +++ /dev/null @@ -1,46 +0,0 @@ -.\" This man-page is Copyright (C) 1997 John S. Kallal -.\" -.\" SPDX-License-Identifier: Linux-man-pages-copyleft -.\" -.\" correction, aeb, 970825 -.TH full 4 2023-10-31 "Linux man-pages 6.7" -.SH NAME -full \- always full device -.SH CONFIGURATION -If your system does not have -.I /dev/full -created already, it -can be created with the following commands: -.P -.in +4n -.EX -mknod \-m 666 /dev/full c 1 7 -chown root:root /dev/full -.EE -.in -.SH DESCRIPTION -The file -.I /dev/full -has major device number 1 -and minor device number 7. -.P -Writes to the -.I /dev/full -device fail with an -.B ENOSPC -error. -This can be used to test how a program handles disk-full errors. -.P -Reads from the -.I /dev/full -device will return \e0 characters. -.P -Seeks on -.I /dev/full -will always succeed. -.SH FILES -.I /dev/full -.SH SEE ALSO -.BR mknod (1), -.BR null (4), -.BR zero (4) diff --git a/man4/fuse.4 b/man4/fuse.4 deleted file mode 100644 index fbdd918..0000000 --- a/man4/fuse.4 +++ /dev/null @@ -1,535 +0,0 @@ -.\" Copyright (c) 2016 Julia Computing Inc, Keno Fischer -.\" Description based on include/uapi/fuse.h and code in fs/fuse -.\" -.\" SPDX-License-Identifier: Linux-man-pages-copyleft -.\" -.TH fuse 4 2023-10-31 "Linux man-pages 6.7" -.SH NAME -fuse \- Filesystem in Userspace (FUSE) device -.SH SYNOPSIS -.nf -.B #include -.fi -.SH DESCRIPTION -This device is the primary interface between the FUSE filesystem driver -and a user-space process wishing to provide the filesystem (referred to -in the rest of this manual page as the -.IR "filesystem daemon" ). -This manual page is intended for those -interested in understanding the kernel interface itself. -Those implementing a FUSE filesystem may wish to make use of -a user-space library such as -.I libfuse -that abstracts away the low-level interface. -.P -At its core, FUSE is a simple client-server protocol, in which the Linux -kernel is the client and the daemon is the server. -After obtaining a file descriptor for this device, the daemon may -.BR read (2) -requests from that file descriptor and is expected to -.BR write (2) -back its replies. -It is important to note that a file descriptor is -associated with a unique FUSE filesystem. -In particular, opening a second copy of this device, -will not allow access to resources created -through the first file descriptor (and vice versa). -.\" -.SS The basic protocol -Every message that is read by the daemon begins with a header described by -the following structure: -.P -.in +4n -.EX -struct fuse_in_header { - uint32_t len; /* Total length of the data, - including this header */ - uint32_t opcode; /* The kind of operation (see below) */ - uint64_t unique; /* A unique identifier for this request */ - uint64_t nodeid; /* ID of the filesystem object - being operated on */ - uint32_t uid; /* UID of the requesting process */ - uint32_t gid; /* GID of the requesting process */ - uint32_t pid; /* PID of the requesting process */ - uint32_t padding; -}; -.EE -.in -.P -The header is followed by a variable-length data portion -(which may be empty) specific to the requested operation -(the requested operation is indicated by -.IR opcode ). -.P -The daemon should then process the request and if applicable send -a reply (almost all operations require a reply; if they do not, -this is documented below), by performing a -.BR write (2) -to the file descriptor. -All replies must start with the following header: -.P -.in +4n -.EX -struct fuse_out_header { - uint32_t len; /* Total length of data written to - the file descriptor */ - int32_t error; /* Any error that occurred (0 if none) */ - uint64_t unique; /* The value from the - corresponding request */ -}; -.EE -.in -.P -This header is also followed by (potentially empty) variable-sized -data depending on the executed request. -However, if the reply is an error reply (i.e., -.I error -is set), -then no further payload data should be sent, independent of the request. -.\" -.SS Exchanged messages -This section should contain documentation for each of the messages -in the protocol. -This manual page is currently incomplete, -so not all messages are documented. -For each message, first the struct sent by the kernel is given, -followed by a description of the semantics of the message. -.TP -.B FUSE_INIT -.IP -.in +4n -.EX -struct fuse_init_in { - uint32_t major; - uint32_t minor; - uint32_t max_readahead; /* Since protocol v7.6 */ - uint32_t flags; /* Since protocol v7.6 */ -}; -.EE -.in -.IP -This is the first request sent by the kernel to the daemon. -It is used to negotiate the protocol version and other filesystem parameters. -Note that the protocol version may affect the layout of any structure -in the protocol (including this structure). -The daemon must thus remember the negotiated version -and flags for each session. -As of the writing of this man page, -the highest supported kernel protocol version is -.IR 7.26 . -.IP -Users should be aware that the descriptions in this manual page -may be incomplete or incorrect for older or more recent protocol versions. -.IP -The reply for this request has the following format: -.IP -.in +4n -.EX -struct fuse_init_out { - uint32_t major; - uint32_t minor; - uint32_t max_readahead; /* Since v7.6 */ - uint32_t flags; /* Since v7.6; some flags bits - were introduced later */ - uint16_t max_background; /* Since v7.13 */ - uint16_t congestion_threshold; /* Since v7.13 */ - uint32_t max_write; /* Since v7.5 */ - uint32_t time_gran; /* Since v7.6 */ - uint32_t unused[9]; -}; -.EE -.in -.IP -If the major version supported by the kernel is larger than that supported -by the daemon, the reply shall consist of only -.I uint32_t major -(following the usual header), -indicating the largest major version supported by the daemon. -The kernel will then issue a new -.B FUSE_INIT -request conforming to the older version. -In the reverse case, the daemon should -quietly fall back to the kernel's major version. -.IP -The negotiated minor version is considered to be the minimum -of the minor versions provided by the daemon and the kernel and -both parties should use the protocol corresponding to said minor version. -.TP -.B FUSE_GETATTR -.IP -.in +4n -.EX -struct fuse_getattr_in { - uint32_t getattr_flags; - uint32_t dummy; - uint64_t fh; /* Set only if - (getattr_flags & FUSE_GETATTR_FH) -}; -.EE -.in -.IP -The requested operation is to compute the attributes to be returned -by -.BR stat (2) -and similar operations for the given filesystem object. -The object for which the attributes should be computed is indicated -either by -.I header\->nodeid -or, if the -.B FUSE_GETATTR_FH -flag is set, by the file handle -.IR fh . -The latter case of operation is analogous to -.BR fstat (2). -.IP -For performance reasons, these attributes may be cached in the kernel for -a specified duration of time. -While the cache timeout has not been exceeded, -the attributes will be served from the cache and will not cause additional -.B FUSE_GETATTR -requests. -.IP -The computed attributes and the requested -cache timeout should then be returned in the following structure: -.IP -.in +4n -.EX -struct fuse_attr_out { - /* Attribute cache duration (seconds + nanoseconds) */ - uint64_t attr_valid; - uint32_t attr_valid_nsec; - uint32_t dummy; - struct fuse_attr { - uint64_t ino; - uint64_t size; - uint64_t blocks; - uint64_t atime; - uint64_t mtime; - uint64_t ctime; - uint32_t atimensec; - uint32_t mtimensec; - uint32_t ctimensec; - uint32_t mode; - uint32_t nlink; - uint32_t uid; - uint32_t gid; - uint32_t rdev; - uint32_t blksize; - uint32_t padding; - } attr; -}; -.EE -.in -.TP -.B FUSE_ACCESS -.IP -.in +4n -.EX -struct fuse_access_in { - uint32_t mask; - uint32_t padding; -}; -.EE -.in -.IP -If the -.I default_permissions -mount options is not used, this request may be used for permissions checking. -No reply data is expected, but errors may be indicated -as usual by setting the -.I error -field in the reply header (in particular, access denied errors -may be indicated by returning -.BR \-EACCES ). -.TP -.BR FUSE_OPEN " and " FUSE_OPENDIR -.in +4n -.EX -struct fuse_open_in { - uint32_t flags; /* The flags that were passed - to the open(2) */ - uint32_t unused; -}; -.EE -.in -.IP -The requested operation is to open the node indicated by -.IR header\->nodeid . -The exact semantics of what this means will depend on the -filesystem being implemented. -However, at the very least the -filesystem should validate that the requested -.I flags -are valid for the indicated resource and then send a reply with the -following format: -.IP -.in +4n -.EX -struct fuse_open_out { - uint64_t fh; - uint32_t open_flags; - uint32_t padding; -}; -.EE -.in -.IP -The -.I fh -field is an opaque identifier that the kernel will use to refer -to this resource -The -.I open_flags -field is a bit mask of any number of the flags -that indicate properties of this file handle to the kernel: -.RS 7 -.TP 18 -.B FOPEN_DIRECT_IO -Bypass page cache for this open file. -.TP -.B FOPEN_KEEP_CACHE -Don't invalidate the data cache on open. -.TP -.B FOPEN_NONSEEKABLE -The file is not seekable. -.RE -.TP -.BR FUSE_READ " and " FUSE_READDIR -.IP -.in +4n -.EX -struct fuse_read_in { - uint64_t fh; - uint64_t offset; - uint32_t size; - uint32_t read_flags; - uint64_t lock_owner; - uint32_t flags; - uint32_t padding; -}; -.EE -.in -.IP -The requested action is to read up to -.I size -bytes of the file or directory, starting at -.IR offset . -The bytes should be returned directly following the usual reply header. -.TP -.B FUSE_INTERRUPT -.in +4n -.EX -struct fuse_interrupt_in { - uint64_t unique; -}; -.EE -.in -.IP -The requested action is to cancel the pending operation indicated by -.IR unique . -This request requires no response. -However, receipt of this message does -not by itself cancel the indicated operation. -The kernel will still expect a reply to said operation (e.g., an -.I EINTR -error or a short read). -At most one -.B FUSE_INTERRUPT -request will be issued for a given operation. -After issuing said operation, -the kernel will wait uninterruptibly for completion of the indicated request. -.TP -.B FUSE_LOOKUP -Directly following the header is a filename to be looked up in the directory -indicated by -.IR header\->nodeid . -The expected reply is of the form: -.IP -.in +4n -.EX -struct fuse_entry_out { - uint64_t nodeid; /* Inode ID */ - uint64_t generation; /* Inode generation */ - uint64_t entry_valid; - uint64_t attr_valid; - uint32_t entry_valid_nsec; - uint32_t attr_valid_nsec; - struct fuse_attr attr; -}; -.EE -.in -.IP -The combination of -.I nodeid -and -.I generation -must be unique for the filesystem's lifetime. -.IP -The interpretation of timeouts and -.I attr -is as for -.BR FUSE_GETATTR . -.TP -.B FUSE_FLUSH -.in +4n -.EX -struct fuse_flush_in { - uint64_t fh; - uint32_t unused; - uint32_t padding; - uint64_t lock_owner; -}; -.EE -.in -.IP -The requested action is to flush any pending changes to the indicated -file handle. -No reply data is expected. -However, an empty reply message -still needs to be issued once the flush operation is complete. -.TP -.BR FUSE_RELEASE " and " FUSE_RELEASEDIR -.in +4n -.EX -struct fuse_release_in { - uint64_t fh; - uint32_t flags; - uint32_t release_flags; - uint64_t lock_owner; -}; -.EE -.in -.IP -These are the converse of -.B FUSE_OPEN -and -.B FUSE_OPENDIR -respectively. -The daemon may now free any resources associated with the -file handle -.I fh -as the kernel will no longer refer to it. -There is no reply data associated with this request, -but a reply still needs to be issued once the request has -been completely processed. -.TP -.B FUSE_STATFS -This operation implements -.BR statfs (2) -for this filesystem. -There is no input data associated with this request. -The expected reply data has the following structure: -.IP -.in +4n -.EX -struct fuse_kstatfs { - uint64_t blocks; - uint64_t bfree; - uint64_t bavail; - uint64_t files; - uint64_t ffree; - uint32_t bsize; - uint32_t namelen; - uint32_t frsize; - uint32_t padding; - uint32_t spare[6]; -}; -\& -struct fuse_statfs_out { - struct fuse_kstatfs st; -}; -.EE -.in -.IP -For the interpretation of these fields, see -.BR statfs (2). -.SH ERRORS -.TP -.B E2BIG -Returned from -.BR read (2) -operations when the kernel's request is too large for the provided buffer -and the request was -.BR FUSE_SETXATTR . -.TP -.B EINVAL -Returned from -.BR write (2) -if validation of the reply failed. -Not all mistakes in replies will be caught by this validation. -However, basic mistakes, such as short replies or an incorrect -.I unique -value, are detected. -.TP -.B EIO -Returned from -.BR read (2) -operations when the kernel's request is too large for the provided buffer. -.IP -.IR Note : -There are various ways in which incorrect use of these interfaces can cause -operations on the provided filesystem's files and directories to fail with -.BR EIO . -Among the possible incorrect uses are: -.RS -.IP \[bu] 3 -changing -.I mode & S_IFMT -for an inode that has previously been reported to the kernel; or -.IP \[bu] -giving replies to the kernel that are shorter than what the kernel expected. -.RE -.TP -.B ENODEV -Returned from -.BR read (2) -and -.BR write (2) -if the FUSE filesystem was unmounted. -.TP -.B EPERM -Returned from operations on a -.I /dev/fuse -file descriptor that has not been mounted. -.SH STANDARDS -Linux. -.SH NOTES -The following messages are not yet documented in this manual page: -.P -.\" FIXME: Document the following. -.in +4n -.EX -.B FUSE_BATCH_FORGET -.B FUSE_BMAP -.B FUSE_CREATE -.B FUSE_DESTROY -.B FUSE_FALLOCATE -.B FUSE_FORGET -.B FUSE_FSYNC -.B FUSE_FSYNCDIR -.B FUSE_GETLK -.B FUSE_GETXATTR -.B FUSE_IOCTL -.B FUSE_LINK -.B FUSE_LISTXATTR -.B FUSE_LSEEK -.B FUSE_MKDIR -.B FUSE_MKNOD -.B FUSE_NOTIFY_REPLY -.B FUSE_POLL -.B FUSE_READDIRPLUS -.B FUSE_READLINK -.B FUSE_REMOVEXATTR -.B FUSE_RENAME -.B FUSE_RENAME2 -.B FUSE_RMDIR -.B FUSE_SETATTR -.B FUSE_SETLK -.B FUSE_SETLKW -.B FUSE_SYMLINK -.B FUSE_UNLINK -.B FUSE_WRITE -.EE -.in -.SH SEE ALSO -.BR fusermount (1), -.BR mount.fuse (8) diff --git a/man4/hd.4 b/man4/hd.4 deleted file mode 100644 index 995468f..0000000 --- a/man4/hd.4 +++ /dev/null @@ -1,82 +0,0 @@ -.\" Copyright (c) 1993 Michael Haardt (michael@moria.de), -.\" Fri Apr 2 11:32:09 MET DST 1993 -.\" -.\" SPDX-License-Identifier: GPL-2.0-or-later -.\" -.\" Modified Sat Jul 24 16:56:20 1993 by Rik Faith -.\" Modified Mon Oct 21 21:38:51 1996 by Eric S. Raymond -.\" (and some more by aeb) -.\" -.TH hd 4 2023-10-31 "Linux man-pages 6.7" -.SH NAME -hd \- MFM/IDE hard disk devices -.SH DESCRIPTION -The -.B hd* -devices are block devices to access MFM/IDE hard disk drives -in raw mode. -The master drive on the primary IDE controller (major device -number 3) is -.BR hda ; -the slave drive is -.BR hdb . -The master drive of the second controller (major device number 22) -is -.B hdc -and the slave is -.BR hdd . -.P -General IDE block device names have the form -.BI hd X\c -, or -.BI hd XP\c -, where -.I X -is a letter denoting the physical drive, and -.I P -is a number denoting the partition on that physical drive. -The first form, -.BI hd X\c -, is used to address the whole drive. -Partition numbers are assigned in the order the partitions -are discovered, and only nonempty, nonextended partitions -get a number. -However, partition numbers 1\[en]4 are given to the -four partitions described in the MBR (the "primary" partitions), -regardless of whether they are unused or extended. -Thus, the first logical partition will be -.BI hd X 5\c -\&. -Both DOS-type partitioning and BSD-disklabel partitioning are supported. -You can have at most 63 partitions on an IDE disk. -.P -For example, -.I /dev/hda -refers to all of the first IDE drive in the system; and -.I /dev/hdb3 -refers to the third DOS "primary" partition on the second one. -.P -They are typically created by: -.P -.in +4n -.EX -mknod \-m 660 /dev/hda b 3 0 -mknod \-m 660 /dev/hda1 b 3 1 -mknod \-m 660 /dev/hda2 b 3 2 -\&... -mknod \-m 660 /dev/hda8 b 3 8 -mknod \-m 660 /dev/hdb b 3 64 -mknod \-m 660 /dev/hdb1 b 3 65 -mknod \-m 660 /dev/hdb2 b 3 66 -\&... -mknod \-m 660 /dev/hdb8 b 3 72 -chown root:disk /dev/hd* -.EE -.in -.SH FILES -.I /dev/hd* -.SH SEE ALSO -.BR chown (1), -.BR mknod (1), -.BR sd (4), -.BR mount (8) diff --git a/man4/hpsa.4 b/man4/hpsa.4 deleted file mode 100644 index 2145bf1..0000000 --- a/man4/hpsa.4 +++ /dev/null @@ -1,240 +0,0 @@ -.\" Copyright (C) 2011, Hewlett-Packard Development Company, L.P. -.\" Written by Stephen M. Cameron -.\" -.\" SPDX-License-Identifier: GPL-2.0-only -.\" -.\" shorthand for double quote that works everywhere. -.ds q \N'34' -.TH hpsa 4 2023-10-31 "Linux man-pages 6.7" -.SH NAME -hpsa \- HP Smart Array SCSI driver -.SH SYNOPSIS -.nf -modprobe hpsa [ hpsa_allow_any=1 ] -.fi -.SH DESCRIPTION -.B hpsa -is a SCSI driver for HP Smart Array RAID controllers. -.SS Options -.IR "hpsa_allow_any=1" : -This option allows the driver to attempt to operate on -any HP Smart Array hardware RAID controller, -even if it is not explicitly known to the driver. -This allows newer hardware to work with older drivers. -Typically this is used to allow installation of -operating systems from media that predates the -RAID controller, though it may also be used to enable -.B hpsa -to drive older controllers that would normally be handled by the -.BR cciss (4) -driver. -These older boards have not been tested and are -not supported with -.BR hpsa , -and -.BR cciss (4) -should still be used for these. -.SS Supported hardware -The -.B hpsa -driver supports the following Smart Array boards: -.P -.nf - Smart Array P700M - Smart Array P212 - Smart Array P410 - Smart Array P410i - Smart Array P411 - Smart Array P812 - Smart Array P712m - Smart Array P711m - StorageWorks P1210m -.fi -.P -.\" commit 135ae6edeb51979d0998daf1357f149a7d6ebb08 -Since Linux 4.14, the following Smart Array boards are also supported: -.P -.nf - Smart Array 5300 - Smart Array 5312 - Smart Array 532 - Smart Array 5i - Smart Array 6400 - Smart Array 6400 EM - Smart Array 641 - Smart Array 642 - Smart Array 6i - Smart Array E200 - Smart Array E200i - Smart Array E200i - Smart Array E200i - Smart Array E200i - Smart Array E500 - Smart Array P400 - Smart Array P400i - Smart Array P600 - Smart Array P700m - Smart Array P800 -.fi -.SS Configuration details -To configure HP Smart Array controllers, -use the HP Array Configuration Utility (either -.BR hpacuxe (8) -or -.BR hpacucli (8)) -or the Offline ROM-based Configuration Utility (ORCA) -run from the Smart Array's option ROM at boot time. -.SH FILES -.SS Device nodes -Logical drives are accessed via the SCSI disk driver -.RB ( sd (4)), -tape drives via the SCSI tape driver -.RB ( st (4)), -and -the RAID controller via the SCSI generic driver -.RB ( sg (4)), -with device nodes named -.IR /dev/sd* , -.IR /dev/st* , -and -.IR /dev/sg* , -respectively. -.SS HPSA-specific host attribute files in /sys -.TP -.I /sys/class/scsi_host/host*/rescan -This is a write-only attribute. -Writing to this attribute will cause the driver to scan for -new, changed, or removed devices (e.g., hot-plugged tape drives, -or newly configured or deleted logical drives, etc.) -and notify the SCSI midlayer of any changes detected. -Normally a rescan is triggered automatically -by HP's Array Configuration Utility (either the GUI or the -command-line variety); -thus, for logical drive changes, the user should not -normally have to use this attribute. -This attribute may be useful when hot plugging devices like tape drives, -or entire storage boxes containing preconfigured logical drives. -.TP -.I /sys/class/scsi_host/host*/firmware_revision -This attribute contains the firmware version of the Smart Array. -.IP -For example: -.IP -.in +4n -.EX -# \fBcd /sys/class/scsi_host/host4\fP -# \fBcat firmware_revision\fP -7.14 -.EE -.in -.\" -.SS HPSA-specific disk attribute files in /sys -.TP -.I /sys/class/scsi_disk/c:b:t:l/device/unique_id -This attribute contains a 32 hex-digit unique ID for each logical drive. -.IP -For example: -.IP -.in +4n -.EX -# \fBcd /sys/class/scsi_disk/4:0:0:0/device\fP -# \fBcat unique_id\fP -600508B1001044395355323037570F77 -.EE -.in -.TP -.I /sys/class/scsi_disk/c:b:t:l/device/raid_level -This attribute contains the RAID level of each logical drive. -.IP -For example: -.IP -.in +4n -.EX -# \fBcd /sys/class/scsi_disk/4:0:0:0/device\fP -# \fBcat raid_level\fP -RAID 0 -.EE -.in -.TP -.I /sys/class/scsi_disk/c:b:t:l/device/lunid -This attribute contains the 16 hex-digit (8 byte) LUN ID -by which a logical drive or physical device can be addressed. -.IR c : b : t : l -are the controller, bus, target, and lun of the device. -.P -For example: -.IP -.in +4n -.EX -# \fBcd /sys/class/scsi_disk/4:0:0:0/device\fP -# \fBcat lunid\fP -0x0000004000000000 -.EE -.in -.\" -.SS Supported ioctl() operations -For compatibility with applications written for the -.BR cciss (4) -driver, many, but -not all of the ioctls supported by the -.BR cciss (4) -driver are also supported by the -.B hpsa -driver. -The data structures used by these ioctls are described in -the Linux kernel source file -.IR include/linux/cciss_ioctl.h . -.TP -.B CCISS_DEREGDISK -.TQ -.B CCISS_REGNEWDISK -.TQ -.B CCISS_REGNEWD -These three ioctls all do exactly the same thing, -which is to cause the driver to rescan for new devices. -This does exactly the same thing as writing to the -hpsa-specific host "rescan" attribute. -.TP -.B CCISS_GETPCIINFO -Returns PCI domain, bus, device, and function and "board ID" (PCI subsystem ID). -.TP -.B CCISS_GETDRIVVER -Returns driver version in three bytes encoded as: -.IP -.in +4n -.EX -(major_version << 16) | (minor_version << 8) | - (subminor_version) -.EE -.in -.TP -.B CCISS_PASSTHRU -.TQ -.B CCISS_BIG_PASSTHRU -Allows "BMIC" and "CISS" commands to be passed through to the Smart Array. -These are used extensively by the HP Array Configuration Utility, -SNMP storage agents, and so on. -See -.I cciss_vol_status -at -.UR http://cciss.sf.net -.UE -for some examples. -.SH SEE ALSO -.BR cciss (4), -.BR sd (4), -.BR st (4), -.BR cciss_vol_status (8), -.BR hpacucli (8), -.BR hpacuxe (8) -.P -.UR http://cciss.sf.net -.UE , -and -.I Documentation/scsi/hpsa.txt -and -.I Documentation/ABI/testing/sysfs\-bus\-pci\-devices\-cciss -in the Linux kernel source tree -.\" .SH AUTHORS -.\" Don Brace, Steve Cameron, Tom Lawler, Mike Miller, Scott Teel -.\" and probably some other people. diff --git a/man4/initrd.4 b/man4/initrd.4 deleted file mode 100644 index 1490f8e..0000000 --- a/man4/initrd.4 +++ /dev/null @@ -1,479 +0,0 @@ -.\" This man-page is Copyright (C) 1997 John S. Kallal -.\" -.\" SPDX-License-Identifier: Linux-man-pages-copyleft -.\" -.\" If the you wish to distribute versions of this work under other -.\" conditions than the above, please contact the author(s) at the following -.\" for permission: -.\" -.\" John S. Kallal - -.\" email: -.\" mail: 518 Kerfoot Farm RD, Wilmington, DE 19803-2444, USA -.\" phone: (302)654-5478 -.\" -.\" $Id: initrd.4,v 0.9 1997/11/07 05:05:32 kallal Exp kallal $ -.TH initrd 4 2023-10-31 "Linux man-pages 6.7" -.SH NAME -initrd \- boot loader initialized RAM disk -.SH CONFIGURATION -.I /dev/initrd -is a read-only block device assigned -major number 1 and minor number 250. -Typically -.I /dev/initrd -is owned by -root:disk -with mode 0400 (read access by root only). -If the Linux system does not have -.I /dev/initrd -already created, it can be created with the following commands: -.P -.in +4n -.EX -mknod \-m 400 /dev/initrd b 1 250 -chown root:disk /dev/initrd -.EE -.in -.P -Also, support for both "RAM disk" and "Initial RAM disk" -(e.g., -.B CONFIG_BLK_DEV_RAM=y -and -.BR CONFIG_BLK_DEV_INITRD=y ) -must be compiled directly into the Linux kernel to use -.IR /dev/initrd . -When using -.IR /dev/initrd , -the RAM disk driver cannot be loaded as a module. -.\" -.\" -.\" -.SH DESCRIPTION -The special file -.I /dev/initrd -is a read-only block device. -This device is a RAM disk that is initialized (e.g., loaded) -by the boot loader before the kernel is started. -The kernel then can use -.IR /dev/initrd "'s" -contents for a two-phase system boot-up. -.P -In the first boot-up phase, the kernel starts up -and mounts an initial root filesystem from the contents of -.I /dev/initrd -(e.g., RAM disk initialized by the boot loader). -In the second phase, additional drivers or other modules -are loaded from the initial root device's contents. -After loading the additional modules, a new root filesystem -(i.e., the normal root filesystem) is mounted from a -different device. -.\" -.\" -.\" -.SS Boot-up operation -When booting up with -.BR initrd , -the system boots as follows: -.IP (1) 5 -The boot loader loads the kernel program and -.IR /dev/initrd 's -contents into memory. -.IP (2) -On kernel startup, -the kernel uncompresses and copies the contents of the device -.I /dev/initrd -onto device -.I /dev/ram0 -and then frees the memory used by -.IR /dev/initrd . -.IP (3) -The kernel then read-write mounts the device -.I /dev/ram0 -as the initial root filesystem. -.IP (4) -If the indicated normal root filesystem is also the initial -root filesystem (e.g., -.IR /dev/ram0 ) -then the kernel skips to the last step for the usual boot sequence. -.IP (5) -If the executable file -.I /linuxrc -is present in the initial root filesystem, -.I /linuxrc -is executed with UID 0. -(The file -.I /linuxrc -must have executable permission. -The file -.I /linuxrc -can be any valid executable, including a shell script.) -.IP (6) -If -.I /linuxrc -is not executed or when -.I /linuxrc -terminates, the normal root filesystem is mounted. -(If -.I /linuxrc -exits with any filesystems mounted on the initial root -filesystem, then the behavior of the kernel is -.BR UNSPECIFIED . -See the NOTES section for the current kernel behavior.) -.IP (7) -If the normal root filesystem has a directory -.IR /initrd , -the device -.I /dev/ram0 -is moved from -.I / -to -.IR /initrd . -Otherwise, if the directory -.I /initrd -does not exist, the device -.I /dev/ram0 -is unmounted. -(When moved from -.I / -to -.IR /initrd , -.I /dev/ram0 -is not unmounted and therefore processes can remain running from -.IR /dev/ram0 . -If directory -.I /initrd -does not exist on the normal root filesystem -and any processes remain running from -.I /dev/ram0 -when -.I /linuxrc -exits, the behavior of the kernel is -.BR UNSPECIFIED . -See the NOTES section for the current kernel behavior.) -.IP (8) -The usual boot sequence (e.g., invocation of -.IR /sbin/init ) -is performed on the normal root filesystem. -.\" -.\" -.\" -.SS Options -The following boot loader options, when used with -.BR initrd , -affect the kernel's boot-up operation: -.TP -.BI initrd= "filename" -Specifies the file to load as the contents of -.IR /dev/initrd . -For -.B LOADLIN -this is a command-line option. -For -.B LILO -you have to use this command in the -.B LILO -configuration file -.IR /etc/lilo.config . -The filename specified with this -option will typically be a gzipped filesystem image. -.TP -.B noinitrd -This boot option disables the two-phase boot-up operation. -The kernel performs the usual boot sequence as if -.I /dev/initrd -was not initialized. -With this option, any contents of -.I /dev/initrd -loaded into memory by the boot loader contents are preserved. -This option permits the contents of -.I /dev/initrd -to be any data and need not be limited to a filesystem image. -However, device -.I /dev/initrd -is read-only and can be read only one time after system startup. -.TP -.BI root= "device-name" -Specifies the device to be used as the normal root filesystem. -For -.B LOADLIN -this is a command-line option. -For -.B LILO -this is a boot time option or -can be used as an option line in the -.B LILO -configuration file -.IR /etc/lilo.config . -The device specified by this option must be a mountable -device having a suitable root filesystem. -.\" -.\" -.\" -.SS Changing the normal root filesystem -By default, -the kernel's settings -(e.g., set in the kernel file with -.BR rdev (8) -or compiled into the kernel file), -or the boot loader option setting -is used for the normal root filesystems. -For an NFS-mounted normal root filesystem, one has to use the -.B nfs_root_name -and -.B nfs_root_addrs -boot options to give the NFS settings. -For more information on NFS-mounted root see the kernel documentation file -.I Documentation/filesystems/nfs/nfsroot.txt -.\" commit dc7a08166f3a5f23e79e839a8a88849bd3397c32 -(or -.I Documentation/filesystems/nfsroot.txt -before Linux 2.6.33). -For more information on setting the root filesystem see also the -.B LILO -and -.B LOADLIN -documentation. -.P -It is also possible for the -.I /linuxrc -executable to change the normal root device. -For -.I /linuxrc -to change the normal root device, -.I /proc -must be mounted. -After mounting -.IR /proc , -.I /linuxrc -changes the normal root device by writing into the proc files -.IR /proc/sys/kernel/real\-root\-dev , -.IR /proc/sys/kernel/nfs\-root\-name , -and -.IR /proc/sys/kernel/nfs\-root\-addrs . -For a physical root device, the root device is changed by having -.I /linuxrc -write the new root filesystem device number into -.IR /proc/sys/kernel/real\-root\-dev . -For an NFS root filesystem, the root device is changed by having -.I /linuxrc -write the NFS setting into files -.I /proc/sys/kernel/nfs\-root\-name -and -.I /proc/sys/kernel/nfs\-root\-addrs -and then writing 0xff (e.g., the pseudo-NFS-device number) into file -.IR /proc/sys/kernel/real\-root\-dev . -For example, the following shell command line would change -the normal root device to -.IR /dev/hdb1 : -.P -.in +4n -.EX -echo 0x365 >/proc/sys/kernel/real\-root\-dev -.EE -.in -.P -For an NFS example, the following shell command lines would change the -normal root device to the NFS directory -.I /var/nfsroot -on a local networked NFS server with IP number 193.8.232.7 for a system with -IP number 193.8.232.2 and named "idefix": -.P -.in +4n -.EX -echo /var/nfsroot >/proc/sys/kernel/nfs\-root\-name -echo 193.8.232.2:193.8.232.7::255.255.255.0:idefix \e - >/proc/sys/kernel/nfs\-root\-addrs -echo 255 >/proc/sys/kernel/real\-root\-dev -.EE -.in -.P -.BR Note : -The use of -.I /proc/sys/kernel/real\-root\-dev -to change the root filesystem is obsolete. -See the Linux kernel source file -.I Documentation/admin\-guide/initrd.rst -.\" commit 9d85025b0418163fae079c9ba8f8445212de8568 -(or -.I Documentation/initrd.txt -before Linux 4.10) -as well as -.BR pivot_root (2) -and -.BR pivot_root (8) -for information on the modern method of changing the root filesystem. -.\" FIXME . Should this manual page describe the pivot_root mechanism? -.\" -.\" -.\" -.SS Usage -The main motivation for implementing -.B initrd -was to allow for modular kernel configuration at system installation. -.P -A possible system installation scenario is as follows: -.IP (1) 5 -The loader program boots from floppy or other media with a minimal kernel -(e.g., support for -.IR /dev/ram , -.IR /dev/initrd , -and the ext2 filesystem) and loads -.I /dev/initrd -with a gzipped version of the initial filesystem. -.IP (2) -The executable -.I /linuxrc -determines what is needed to (1) mount the normal root filesystem -(i.e., device type, device drivers, filesystem) and (2) the -distribution media (e.g., CD-ROM, network, tape, ...). -This can be done by asking the user, by auto-probing, -or by using a hybrid approach. -.IP (3) -The executable -.I /linuxrc -loads the necessary modules from the initial root filesystem. -.IP (4) -The executable -.I /linuxrc -creates and populates the root filesystem. -(At this stage the normal root filesystem does not have to be a -completed system yet.) -.IP (5) -The executable -.I /linuxrc -sets -.IR /proc/sys/kernel/real\-root\-dev , -unmounts -.IR /proc , -the normal root filesystem and any other filesystems -it has mounted, and then terminates. -.IP (6) -The kernel then mounts the normal root filesystem. -.IP (7) -Now that the filesystem is accessible and intact, -the boot loader can be installed. -.IP (8) -The boot loader is configured to load into -.I /dev/initrd -a filesystem with the set of modules that was used to bring up the system. -(e.g., device -.I /dev/ram0 -can be modified, then unmounted, and finally, the image is written from -.I /dev/ram0 -to a file.) -.IP (9) -The system is now bootable and additional installation tasks can be -performed. -.P -The key role of -.I /dev/initrd -in the above is to reuse the configuration data during normal system operation -without requiring initial kernel selection, a large generic kernel or, -recompiling the kernel. -.P -A second scenario is for installations where Linux runs on systems with -different hardware configurations in a single administrative network. -In such cases, it may be desirable to use only a small set of kernels -(ideally only one) and to keep the system-specific part of configuration -information as small as possible. -In this case, create a common file -with all needed modules. -Then, only the -.I /linuxrc -file or a file executed by -.I /linuxrc -would be different. -.P -A third scenario is more convenient recovery disks. -Because information like the location of the root filesystem -partition is not needed at boot time, the system loaded from -.I /dev/initrd -can use a dialog and/or auto-detection followed by a -possible sanity check. -.P -Last but not least, Linux distributions on CD-ROM may use -.B initrd -for easy installation from the CD-ROM. -The distribution can use -.B LOADLIN -to directly load -.I /dev/initrd -from CD-ROM without the need of any floppies. -The distribution could also use a -.B LILO -boot floppy and then bootstrap a bigger RAM disk via -.I /dev/initrd -from the CD-ROM. -.\" -.\" -.\" -.SH FILES -.I /dev/initrd -.br -.I /dev/ram0 -.br -.I /linuxrc -.br -.I /initrd -.\" -.\" -.\" -.SH NOTES -.IP \[bu] 3 -With the current kernel, any filesystems that remain mounted when -.I /dev/ram0 -is moved from -.I / -to -.I /initrd -continue to be accessible. -However, the -.I /proc/mounts -entries are not updated. -.IP \[bu] -With the current kernel, if directory -.I /initrd -does not exist, then -.I /dev/ram0 -will -.B not -be fully unmounted if -.I /dev/ram0 -is used by any process or has any filesystem mounted on it. -If -.I /dev/ram0 -is -.B not -fully unmounted, then -.I /dev/ram0 -will remain in memory. -.IP \[bu] -Users of -.I /dev/initrd -should not depend on the behavior given in the above notes. -The behavior may change in future versions of the Linux kernel. -.\" -.\" -.\" -.\" .SH AUTHORS -.\" The kernel code for device -.\" .BR initrd -.\" was written by Werner Almesberger and -.\" Hans Lermen . -.\" The code for -.\" .BR initrd -.\" was added to the baseline Linux kernel in development version 1.3.73. -.SH SEE ALSO -.BR chown (1), -.BR mknod (1), -.BR ram (4), -.BR freeramdisk (8), -.BR rdev (8) -.P -.I Documentation/admin\-guide/initrd.rst -.\" commit 9d85025b0418163fae079c9ba8f8445212de8568 -(or -.I Documentation/initrd.txt -before Linux 4.10) -in the Linux kernel source tree, the LILO documentation, -the LOADLIN documentation, the SYSLINUX documentation diff --git a/man4/intro.4 b/man4/intro.4 deleted file mode 100644 index bcfcee4..0000000 --- a/man4/intro.4 +++ /dev/null @@ -1,22 +0,0 @@ -.\" Copyright (c) 1993 Michael Haardt (michael@moria.de), -.\" Fri Apr 2 11:32:09 MET DST 1993 -.\" -.\" SPDX-License-Identifier: GPL-2.0-or-later -.\" -.\" Modified Sat Jul 24 16:57:14 1993 by Rik Faith (faith@cs.unc.edu) -.TH intro 4 2023-02-05 "Linux man-pages 6.7" -.SH NAME -intro \- introduction to special files -.SH DESCRIPTION -Section 4 of the manual describes special files (devices). -.SH FILES -/dev/* \[em] device files -.SH NOTES -.SS Authors and copyright conditions -Look at the header of the manual page source for the author(s) and copyright -conditions. -Note that these can be different from page to page! -.SH SEE ALSO -.BR mknod (1), -.BR mknod (2), -.BR standards (7) diff --git a/man4/kmem.4 b/man4/kmem.4 deleted file mode 100644 index d4c1762..0000000 --- a/man4/kmem.4 +++ /dev/null @@ -1 +0,0 @@ -.so man4/mem.4 diff --git a/man4/lirc.4 b/man4/lirc.4 deleted file mode 100644 index 227172f..0000000 --- a/man4/lirc.4 +++ /dev/null @@ -1,423 +0,0 @@ -.\" Copyright (c) 2015-2016, Alec Leamas -.\" Copyright (c) 2018, Sean Young -.\" -.\" SPDX-License-Identifier: GPL-2.0-or-later -.TH lirc 4 2023-10-31 "Linux man-pages 6.7" -.SH NAME -lirc \- lirc devices -.SH DESCRIPTION -The -.I /dev/lirc* -character devices provide a low-level -bidirectional interface to infra-red (IR) remotes. -Most of these devices can receive, and some can send. -When receiving or sending data, the driver works in two different modes -depending on the underlying hardware. -.P -Some hardware (typically TV-cards) decodes the IR signal internally -and provides decoded button presses as scancode values. -Drivers for this kind of hardware work in -.B LIRC_MODE_SCANCODE -mode. -Such hardware usually does not support sending IR signals. -Furthermore, such hardware can only decode a limited set of IR protocols, -usually only the protocol of the specific remote which is -bundled with, for example, a TV-card. -.P -Other hardware provides a stream of pulse/space durations. -Such drivers work in -.B LIRC_MODE_MODE2 -mode. -Such hardware can be used with (almost) any kind of remote. -This type of hardware can also be used in -.B LIRC_MODE_SCANCODE -mode, in which case the kernel IR decoders will decode the IR. -These decoders can be written in extended BPF (see -.BR bpf (2)) -and attached to the -.B lirc -device. -Sometimes, this kind of hardware also supports -sending IR data. -.P -The \fBLIRC_GET_FEATURES\fR ioctl (see below) allows probing for whether -receiving and sending is supported, and in which modes, amongst other -features. -.\" -.SS Reading input with the LIRC_MODE_MODE2 mode -In the \fBLIRC_MODE_MODE2 mode\fR, the data returned by -.BR read (2) -provides 32-bit values representing a space or a pulse duration. -The time of the duration (microseconds) is encoded in the lower 24 bits. -Pulse (also known as flash) -indicates a duration of infrared light being detected, -and space (also known as gap) indicates a duration with no infrared. -If the duration of space exceeds the inactivity timeout, -a special timeout package is delivered, -which marks the end of a message. -The upper 8 bits indicate the type of package: -.TP 4 -.B LIRC_MODE2_SPACE -Value reflects a space duration (microseconds). -.TP 4 -.B LIRC_MODE2_PULSE -Value reflects a pulse duration (microseconds). -.TP 4 -.B LIRC_MODE2_FREQUENCY -Value reflects a frequency (Hz); see the -.B LIRC_SET_MEASURE_CARRIER_MODE -ioctl. -.TP 4 -.B LIRC_MODE2_TIMEOUT -Value reflects a space duration (microseconds). -The package reflects a timeout; see the -.B LIRC_SET_REC_TIMEOUT_REPORTS -ioctl. -.\" -.TP 4 -.B LIRC_MODE2_OVERFLOW -The IR receiver encountered an overflow, -and as a result data is missing -(since Linux 5.18). -.SS Reading input with the LIRC_MODE_SCANCODE mode -In the \fBLIRC_MODE_SCANCODE\fR -mode, the data returned by -.BR read (2) -reflects decoded button presses, in the struct \fIlirc_scancode\fR. -The scancode is stored in the \fIscancode\fR field, and the IR protocol -is stored in \fIrc_proto\fR. -This field has one the values of the \fIenum rc_proto\fR. -.\" -.SS Writing output with the LIRC_MODE_PULSE mode -The data written to the character device using -.BR write (2) -is a pulse/space sequence of integer values. -Pulses and spaces are only marked implicitly by their position. -The data must start and end with a pulse, thus it must always include -an odd number of samples. -The -.BR write (2) -function blocks until the data has been transmitted by the -hardware. -If more data is provided than the hardware can send, the -.BR write (2) -call fails with the error -.BR EINVAL . -.SS Writing output with the LIRC_MODE_SCANCODE mode -The data written to the character devices must be a single struct -\fIlirc_scancode\fR. -The \fIscancode\fR and \fIrc_proto\fR fields must -filled in, all other fields must be 0. -The kernel IR encoders will -convert the scancode to pulses and spaces. -The protocol or scancode is invalid, or the -.B lirc -device cannot transmit. -.SH IOCTL COMMANDS -.nf -#include /* But see BUGS */ -\& -int ioctl(int fd, int cmd, int *val); -.fi -.P -The following -.BR ioctl (2) -operations are provided by the -.B lirc -character device to probe or change specific -.B lirc -hardware settings. -.SS Always Supported Commands -\fI/dev/lirc*\fR devices always support the following commands: -.TP 4 -.BR LIRC_GET_FEATURES " (\fIvoid\fP)" -Returns a bit mask of combined features bits; see FEATURES. -.P -If a device returns an error code for -.BR LIRC_GET_FEATURES , -it is safe to assume it is not a -.B lirc -device. -.\" -.SS Optional Commands -Some -.B lirc -devices support the commands listed below. -Unless otherwise stated, these fail with the error \fBENOTTY\fR if the -operation isn't supported, or with the error \fBEINVAL\fR if the operation -failed, or invalid arguments were provided. -If a driver does not announce support of certain features, invoking -the corresponding ioctls will fail with the error -.BR ENOTTY . -.TP -.BR LIRC_GET_REC_MODE " (\fIvoid\fP)" -If the -.B lirc -device has no receiver, this operation fails with the error -.BR ENOTTY . -Otherwise, it returns the receive mode, which will be one of: -.RS -.TP -.B LIRC_MODE_MODE2 -The driver returns a sequence of pulse/space durations. -.TP -.B LIRC_MODE_SCANCODE -The driver returns struct -.I lirc_scancode -values, each of which represents -a decoded button press. -.RE -.TP -.BR LIRC_SET_REC_MODE " (\fIint\fP)" -Set the receive mode. -.I val -is either -.B LIRC_MODE_SCANCODE -or -.BR LIRC_MODE_MODE2 . -If the -.B lirc -device has no receiver, this operation fails with the error -.B ENOTTY. -.TP -.BR LIRC_GET_SEND_MODE " (\fIvoid\fP)" -Return the send mode. -.B LIRC_MODE_PULSE -or -.B LIRC_MODE_SCANCODE -is supported. -If the -.B lirc -device cannot send, this operation fails with the error -.B ENOTTY. -.TP -.BR LIRC_SET_SEND_MODE " (\fIint\fP)" -Set the send mode. -.I val -is either -.B LIRC_MODE_SCANCODE -or -.BR LIRC_MODE_PULSE . -If the -.B lirc -device cannot send, this operation fails with the error -.BR ENOTTY . -.TP -.BR LIRC_SET_SEND_CARRIER " (\fIint\fP)" -Set the modulation frequency. -The argument is the frequency (Hz). -.TP -.BR LIRC_SET_SEND_DUTY_CYCLE " (\fIint\fP)" -Set the carrier duty cycle. -.I val -is a number in the range [0,100] which -describes the pulse width as a percentage of the total cycle. -Currently, no special meaning is defined for 0 or 100, but the values -are reserved for future use. -.TP -.BI LIRC_GET_MIN_TIMEOUT( void ) -.TQ -.BI LIRC_GET_MAX_TIMEOUT( void ) -Some devices have internal timers that can be used to detect when -there has been no IR activity for a long time. -This can help -.BR lircd (8) -in detecting that an IR signal is finished and can speed up the -decoding process. -These operations -return integer values with the minimum/maximum timeout that can be -set (microseconds). -Some devices have a fixed timeout. -For such drivers, -.B LIRC_GET_MIN_TIMEOUT -and -.B LIRC_GET_MAX_TIMEOUT -will fail with the error -.BR ENOTTY . -.TP -.BR LIRC_SET_REC_TIMEOUT " (\fIint\fP)" -Set the integer value for IR inactivity timeout (microseconds). -To be accepted, the value must be within the limits defined by -.B LIRC_GET_MIN_TIMEOUT -and -.BR LIRC_GET_MAX_TIMEOUT . -A value of 0 (if supported by the hardware) disables all hardware -timeouts and data should be reported as soon as possible. -If the exact value cannot be set, then the next possible value -.I greater -than the given value should be set. -.TP -.BR LIRC_GET_REC_TIMEOUT " (\fIvoid\fP)" -Return the current inactivity timeout (microseconds). -Available since Linux 4.18. -.TP -.BR LIRC_SET_REC_TIMEOUT_REPORTS " (\fIint\fP)" -Enable -.RI ( val -is 1) or disable -.RI ( val -is 0) timeout packages in -.BR LIRC_MODE_MODE2 . -The behavior of this operation has varied across kernel versions: -.RS -.IP \[bu] 3 -Since Linux 5.17: -timeout packages are always enabled and this ioctl is a no-op. -.IP \[bu] -Since Linux 4.16: -timeout packages are enabled by default. -Each time the -.B lirc -device is opened, the -.B LIRC_SET_REC_TIMEOUT -operation can be used to disable (and, if desired, to later re-enable) -the timeout on the file descriptor. -.IP \[bu] -In Linux 4.15 and earlier: -timeout packages are disabled by default, and enabling them (via -.BR LIRC_SET_REC_TIMEOUT ) -on any file descriptor associated with the -.B lirc -device has the effect of enabling timeouts for all file descriptors -referring to that device (until timeouts are disabled again). -.RE -.TP -.BR LIRC_SET_REC_CARRIER " (\fIint\fP)" -Set the upper bound of the receive carrier frequency (Hz). -See -.BR LIRC_SET_REC_CARRIER_RANGE . -.TP -.BR LIRC_SET_REC_CARRIER_RANGE " (\fIint\fP)" -Sets the lower bound of the receive carrier frequency (Hz). -For this to take affect, first set the lower bound using the -.B LIRC_SET_REC_CARRIER_RANGE -ioctl, and then the upper bound using the -.B LIRC_SET_REC_CARRIER -ioctl. -.TP -.BR LIRC_SET_MEASURE_CARRIER_MODE " (\fIint\fP)" -Enable -.RI ( val -is 1) or disable -.RI ( val -is 0) the measure mode. -If enabled, from the next key press on, the driver will send -.B LIRC_MODE2_FREQUENCY -packets. -By default, this should be turned off. -.TP -.BR LIRC_GET_REC_RESOLUTION " (\fIvoid\fP)" -Return the driver resolution (microseconds). -.TP -.BR LIRC_SET_TRANSMITTER_MASK " (\fIint\fP)" -Enable the set of transmitters specified in -.IR val , -which contains a bit mask where each enabled transmitter is a 1. -The first transmitter is encoded by the least significant bit, and so on. -When an invalid bit mask is given, for example a bit is set even -though the device does not have so many transmitters, -this operation returns the -number of available transmitters and does nothing otherwise. -.TP -.BR LIRC_SET_WIDEBAND_RECEIVER " (\fIint\fP)" -Some devices are equipped with a special wide band receiver which is -intended to be used to learn the output of an existing remote. -This ioctl can be used to enable -.RI ( val -equals 1) or disable -.RI ( val -equals 0) this functionality. -This might be useful for devices that otherwise have narrow band -receivers that prevent them to be used with certain remotes. -Wide band receivers may also be more precise. -On the other hand, their disadvantage usually is reduced range of -reception. -.IP -Note: wide band receiver may be implicitly enabled if you enable -carrier reports. -In that case, it will be disabled as soon as you disable carrier reports. -Trying to disable a wide band receiver while carrier reports are active -will do nothing. -.\" -.SH FEATURES -the -.B LIRC_GET_FEATURES -ioctl returns a bit mask describing features of the driver. -The following bits may be returned in the mask: -.TP -.B LIRC_CAN_REC_MODE2 -The driver is capable of receiving using -.BR LIRC_MODE_MODE2 . -.TP -.B LIRC_CAN_REC_SCANCODE -The driver is capable of receiving using -.BR LIRC_MODE_SCANCODE . -.TP -.B LIRC_CAN_SET_SEND_CARRIER -The driver supports changing the modulation frequency using -.BR LIRC_SET_SEND_CARRIER . -.TP -.B LIRC_CAN_SET_SEND_DUTY_CYCLE -The driver supports changing the duty cycle using -.BR LIRC_SET_SEND_DUTY_CYCLE . -.TP -.B LIRC_CAN_SET_TRANSMITTER_MASK -The driver supports changing the active transmitter(s) using -.BR LIRC_SET_TRANSMITTER_MASK . -.TP -.B LIRC_CAN_SET_REC_CARRIER -The driver supports setting the receive carrier frequency using -.BR LIRC_SET_REC_CARRIER . -Any -.B lirc -device since the drivers were merged in Linux 2.6.36 -must have -.B LIRC_CAN_SET_REC_CARRIER_RANGE -set if -.B LIRC_CAN_SET_REC_CARRIER -feature is set. -.TP -.B LIRC_CAN_SET_REC_CARRIER_RANGE -The driver supports -.BR LIRC_SET_REC_CARRIER_RANGE . -The lower bound of the carrier must first be set using the -.B LIRC_SET_REC_CARRIER_RANGE -ioctl, before using the -.B LIRC_SET_REC_CARRIER -ioctl to set the upper bound. -.TP -.B LIRC_CAN_GET_REC_RESOLUTION -The driver supports -.BR LIRC_GET_REC_RESOLUTION . -.TP -.B LIRC_CAN_SET_REC_TIMEOUT -The driver supports -.BR LIRC_SET_REC_TIMEOUT . -.TP -.B LIRC_CAN_MEASURE_CARRIER -The driver supports measuring of the modulation frequency using -.BR LIRC_SET_MEASURE_CARRIER_MODE . -.TP -.B LIRC_CAN_USE_WIDEBAND_RECEIVER -The driver supports learning mode using -.BR LIRC_SET_WIDEBAND_RECEIVER . -.TP -.B LIRC_CAN_SEND_PULSE -The driver supports sending using -.B LIRC_MODE_PULSE -or -.B LIRC_MODE_SCANCODE -.\" -.SH BUGS -Using these devices requires the kernel source header file -.IR lirc.h . -This file is not available before Linux 4.6. -Users of older kernels could use the file bundled in -.UR http://www.lirc.org -.UE . -.\" -.SH SEE ALSO -\fBir\-ctl\fP(1), \fBlircd\fP(8),\ \fBbpf\fP(2) -.P -.UR https://www.kernel.org/\:doc/\:html/\:latest/\:userspace\-api/\:media/\:rc/\:lirc\-dev.html -.UE diff --git a/man4/loop-control.4 b/man4/loop-control.4 deleted file mode 100644 index 251e652..0000000 --- a/man4/loop-control.4 +++ /dev/null @@ -1 +0,0 @@ -.so man4/loop.4 diff --git a/man4/loop.4 b/man4/loop.4 deleted file mode 100644 index 273456c..0000000 --- a/man4/loop.4 +++ /dev/null @@ -1,361 +0,0 @@ -.\" Copyright 2002 Urs Thuermann (urs@isnogud.escape.de) -.\" and Copyright 2015 Michael Kerrisk -.\" -.\" SPDX-License-Identifier: GPL-2.0-or-later -.\" -.TH loop 4 2023-10-31 "Linux man-pages 6.7" -.SH NAME -loop, loop-control \- loop devices -.SH SYNOPSIS -.nf -#include -.fi -.SH DESCRIPTION -The loop device is a block device that maps its data blocks not to a -physical device such as a hard disk or optical disk drive, -but to the blocks of -a regular file in a filesystem or to another block device. -This can be useful for example to provide a block device for a filesystem -image stored in a file, so that it can be mounted with the -.BR mount (8) -command. -You could do -.P -.in +4n -.EX -$ \fBdd if=/dev/zero of=file.img bs=1MiB count=10\fP -$ \fBsudo losetup /dev/loop4 file.img\fP -$ \fBsudo mkfs \-t ext4 /dev/loop4\fP -$ \fBsudo mkdir /myloopdev\fP -$ \fBsudo mount /dev/loop4 /myloopdev\fP -.EE -.in -.P -See -.BR losetup (8) -for another example. -.P -A transfer function can be specified for each loop device for -encryption and decryption purposes. -.P -The following -.BR ioctl (2) -operations are provided by the loop block device: -.TP -.B LOOP_SET_FD -Associate the loop device with the open file whose file descriptor is -passed as the (third) -.BR ioctl (2) -argument. -.TP -.B LOOP_CLR_FD -Disassociate the loop device from any file descriptor. -.TP -.B LOOP_SET_STATUS -Set the status of the loop device using the (third) -.BR ioctl (2) -argument. -This argument is a pointer to a -.I loop_info -structure, defined in -.I -as: -.IP -.in +4n -.EX -struct loop_info { - int lo_number; /* ioctl r/o */ - dev_t lo_device; /* ioctl r/o */ - unsigned long lo_inode; /* ioctl r/o */ - dev_t lo_rdevice; /* ioctl r/o */ - int lo_offset; - int lo_encrypt_type; - int lo_encrypt_key_size; /* ioctl w/o */ - int lo_flags; /* ioctl r/w (r/o before - Linux 2.6.25) */ - char lo_name[LO_NAME_SIZE]; - unsigned char lo_encrypt_key[LO_KEY_SIZE]; - /* ioctl w/o */ - unsigned long lo_init[2]; - char reserved[4]; -}; -.EE -.in -.IP -The encryption type -.RI ( lo_encrypt_type ) -should be one of -.BR LO_CRYPT_NONE , -.BR LO_CRYPT_XOR , -.BR LO_CRYPT_DES , -.BR LO_CRYPT_FISH2 , -.BR LO_CRYPT_BLOW , -.BR LO_CRYPT_CAST128 , -.BR LO_CRYPT_IDEA , -.BR LO_CRYPT_DUMMY , -.BR LO_CRYPT_SKIPJACK , -or (since Linux 2.6.0) -.BR LO_CRYPT_CRYPTOAPI . -.IP -The -.I lo_flags -field is a bit mask that can include zero or more of the following: -.RS -.TP -.B LO_FLAGS_READ_ONLY -The loopback device is read-only. -.TP -.BR LO_FLAGS_AUTOCLEAR " (since Linux 2.6.25)" -.\" commit 96c5865559cee0f9cbc5173f3c949f6ce3525581 -The loopback device will autodestruct on last close. -.TP -.BR LO_FLAGS_PARTSCAN " (since Linux 3.2)" -.\" commit e03c8dd14915fabc101aa495828d58598dc5af98 -Allow automatic partition scanning. -.TP -.BR LO_FLAGS_DIRECT_IO " (since Linux 4.10)" -.\" commit 2e5ab5f379f96a6207c45be40c357ebb1beb8ef3 -Use direct I/O mode to access the backing file. -.RE -.IP -The only -.I lo_flags -that can be modified by -.B LOOP_SET_STATUS -are -.B LO_FLAGS_AUTOCLEAR -and -.BR LO_FLAGS_PARTSCAN . -.TP -.B LOOP_GET_STATUS -Get the status of the loop device. -The (third) -.BR ioctl (2) -argument must be a pointer to a -.IR "struct loop_info" . -.TP -.BR LOOP_CHANGE_FD " (since Linux 2.6.5)" -Switch the backing store of the loop device to the new file identified -file descriptor specified in the (third) -.BR ioctl (2) -argument, which is an integer. -This operation is possible only if the loop device is read-only and -the new backing store is the same size and type as the old backing store. -.TP -.BR LOOP_SET_CAPACITY " (since Linux 2.6.30)" -.\" commit 53d6660836f233df66490707365ab177e5fb2bb4 -Resize a live loop device. -One can change the size of the underlying backing store and then use this -operation so that the loop driver learns about the new size. -This operation takes no argument. -.TP -.BR LOOP_SET_DIRECT_IO " (since Linux 4.10)" -.\" commit ab1cb278bc7027663adbfb0b81404f8398437e11 -Set DIRECT I/O mode on the loop device, so that -it can be used to open backing file. -The (third) -.BR ioctl (2) -argument is an unsigned long value. -A nonzero represents direct I/O mode. -.TP -.BR LOOP_SET_BLOCK_SIZE " (since Linux 4.14)" -.\" commit 89e4fdecb51cf5535867026274bc97de9480ade5 -Set the block size of the loop device. -The (third) -.BR ioctl (2) -argument is an unsigned long value. -This value must be a power of two in the range -[512,pagesize]; -otherwise, an -.B EINVAL -error results. -.TP -.BR LOOP_CONFIGURE " (since Linux 5.8)" -.\" commit 3448914e8cc550ba792d4ccc74471d1ca4293aae -Setup and configure all loop device parameters in a single step using -the (third) -.BR ioctl (2) -argument. -This argument is a pointer to a -.I loop_config -structure, defined in -.I -as: -.IP -.in +4n -.EX -struct loop_config { - __u32 fd; - __u32 block_size; - struct loop_info64 info; - __u64 __reserved[8]; -}; -.EE -.in -.IP -In addition to doing what -.B LOOP_SET_STATUS -can do, -.B LOOP_CONFIGURE -can also be used to do the following: -.RS -.IP \[bu] 3 -set the correct block size immediately by setting -.IR loop_config.block_size ; -.IP \[bu] -explicitly request direct I/O mode by setting -.B LO_FLAGS_DIRECT_IO -in -.IR loop_config.info.lo_flags ; -and -.IP \[bu] -explicitly request read-only mode by setting -.B LO_FLAGS_READ_ONLY -in -.IR loop_config.info.lo_flags . -.RE -.P -Since Linux 2.6, there are two new -.BR ioctl (2) -operations: -.TP -.B LOOP_SET_STATUS64 -.TQ -.B LOOP_GET_STATUS64 -These are similar to -.BR LOOP_SET_STATUS " and " LOOP_GET_STATUS -described above but use the -.I loop_info64 -structure, -which has some additional fields and a larger range for some other fields: -.IP -.in +4n -.EX -struct loop_info64 { - uint64_t lo_device; /* ioctl r/o */ - uint64_t lo_inode; /* ioctl r/o */ - uint64_t lo_rdevice; /* ioctl r/o */ - uint64_t lo_offset; - uint64_t lo_sizelimit; /* bytes, 0 == max available */ - uint32_t lo_number; /* ioctl r/o */ - uint32_t lo_encrypt_type; - uint32_t lo_encrypt_key_size; /* ioctl w/o */ - uint32_t lo_flags; i /* ioctl r/w (r/o before - Linux 2.6.25) */ - uint8_t lo_file_name[LO_NAME_SIZE]; - uint8_t lo_crypt_name[LO_NAME_SIZE]; - uint8_t lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */ - uint64_t lo_init[2]; -}; -.EE -.in -.SS /dev/loop-control -Since Linux 3.1, -.\" commit 770fe30a46a12b6fb6b63fbe1737654d28e84844 -the kernel provides the -.I /dev/loop\-control -device, which permits an application to dynamically find a free device, -and to add and remove loop devices from the system. -To perform these operations, one first opens -.I /dev/loop\-control -and then employs one of the following -.BR ioctl (2) -operations: -.TP -.B LOOP_CTL_GET_FREE -Allocate or find a free loop device for use. -On success, the device number is returned as the result of the call. -This operation takes no argument. -.TP -.B LOOP_CTL_ADD -Add the new loop device whose device number is specified -as a long integer in the third -.BR ioctl (2) -argument. -On success, the device index is returned as the result of the call. -If the device is already allocated, the call fails with the error -.BR EEXIST . -.TP -.B LOOP_CTL_REMOVE -Remove the loop device whose device number is specified -as a long integer in the third -.BR ioctl (2) -argument. -On success, the device number is returned as the result of the call. -If the device is in use, the call fails with the error -.BR EBUSY . -.SH FILES -.TP -.I /dev/loop* -The loop block special device files. -.SH EXAMPLES -The program below uses the -.I /dev/loop\-control -device to find a free loop device, opens the loop device, -opens a file to be used as the underlying storage for the device, -and then associates the loop device with the backing store. -The following shell session demonstrates the use of the program: -.P -.in +4n -.EX -$ \fBdd if=/dev/zero of=file.img bs=1MiB count=10\fP -10+0 records in -10+0 records out -10485760 bytes (10 MB) copied, 0.00609385 s, 1.7 GB/s -$ \fBsudo ./mnt_loop file.img\fP -loopname = /dev/loop5 -.EE -.in -.SS Program source -\& -.EX -#include -#include -#include -#include -#include -#include -\& -#define errExit(msg) do { perror(msg); exit(EXIT_FAILURE); \e - } while (0) -\& -int -main(int argc, char *argv[]) -{ - int loopctlfd, loopfd, backingfile; - long devnr; - char loopname[4096]; -\& - if (argc != 2) { - fprintf(stderr, "Usage: %s backing\-file\en", argv[0]); - exit(EXIT_FAILURE); - } -\& - loopctlfd = open("/dev/loop\-control", O_RDWR); - if (loopctlfd == \-1) - errExit("open: /dev/loop\-control"); -\& - devnr = ioctl(loopctlfd, LOOP_CTL_GET_FREE); - if (devnr == \-1) - errExit("ioctl\-LOOP_CTL_GET_FREE"); -\& - sprintf(loopname, "/dev/loop%ld", devnr); - printf("loopname = %s\en", loopname); -\& - loopfd = open(loopname, O_RDWR); - if (loopfd == \-1) - errExit("open: loopname"); -\& - backingfile = open(argv[1], O_RDWR); - if (backingfile == \-1) - errExit("open: backing\-file"); -\& - if (ioctl(loopfd, LOOP_SET_FD, backingfile) == \-1) - errExit("ioctl\-LOOP_SET_FD"); -\& - exit(EXIT_SUCCESS); -} -.EE -.SH SEE ALSO -.BR losetup (8), -.BR mount (8) diff --git a/man4/lp.4 b/man4/lp.4 deleted file mode 100644 index aa4376b..0000000 --- a/man4/lp.4 +++ /dev/null @@ -1,137 +0,0 @@ -'\" t -.\" Copyright (c) Michael Haardt (michael@cantor.informatik.rwth-aachen.de), -.\" Sun Jan 15 19:16:33 1995 -.\" -.\" SPDX-License-Identifier: GPL-2.0-or-later -.\" -.\" Modified, Sun Feb 26 15:02:58 1995, faith@cs.unc.edu -.TH lp 4 2023-02-05 "Linux man-pages 6.7" -.SH NAME -lp \- line printer devices -.SH SYNOPSIS -.nf -.B #include -.fi -.SH CONFIGURATION -\fBlp\fP[0\[en]2] are character devices for the parallel line printers; -they have major number 6 and minor number 0\[en]2. -The minor numbers -correspond to the printer port base addresses 0x03bc, 0x0378, and 0x0278. -Usually they have mode 220 and are owned by user -.I root -and group -.IR lp . -You can use printer ports either with polling or with interrupts. -Interrupts are recommended when high traffic is expected, for example, -for laser printers. -For typical dot matrix printers, polling will usually be enough. -The default is polling. -.SH DESCRIPTION -The following -.BR ioctl (2) -calls are supported: -.TP -.BR "int ioctl(int " fd ", LPTIME, int " arg ) -Sets the amount of time that the driver sleeps before rechecking the printer -when the printer's buffer appears to be filled to -.IR arg . -If you have a fast printer, decrease this number; -if you have a slow printer, then increase it. -This is in hundredths of a second, the default 2 -being 0.02 seconds. -It influences only the polling driver. -.TP -.BR "int ioctl(int " fd ", LPCHAR, int " arg ) -Sets the maximum number of busy-wait iterations which the polling driver does -while waiting for the printer to get ready for receiving a character to -.IR arg . -If printing is too slow, increase this number; if the -system gets too slow, decrease this number. -The default is 1000. -It influences only the polling driver. -.TP -.BR "int ioctl(int " fd ", LPABORT, int " arg ) -If -.I arg -is 0, the printer driver will retry on errors, otherwise -it will abort. -The default is 0. -.TP -.BR "int ioctl(int " fd ", LPABORTOPEN, int " arg ) -If -.I arg -is 0, -.BR open (2) -will be aborted on error, otherwise error will be ignored. -The default is to ignore it. -.TP -.BR "int ioctl(int " fd ", LPCAREFUL, int " arg ) -If -.I arg -is 0, then the out-of-paper, offline, and error signals are -required to be false on all writes, otherwise they are ignored. -The default is to ignore them. -.TP -.BR "int ioctl(int " fd ", LPWAIT, int " arg ) -Sets the number of busy waiting iterations to wait before strobing the -printer to accept a just-written character, and the number of iterations to -wait before turning the strobe off again, -to -.IR arg . -The specification says this time should be 0.5 -microseconds, but experience has shown the delay caused by the code is -already enough. -For that reason, the default value is 0. -.\" FIXME . Actually, since Linux 2.2, the default is 1 -This is used for both the polling and the interrupt driver. -.TP -.BR "int ioctl(int " fd ", LPSETIRQ, int " arg ) -This -.BR ioctl (2) -requires superuser privileges. -It takes an -.I int -containing the new IRQ as argument. -As a side effect, the printer will be reset. -When -.I arg -is 0, the polling driver will be used, which is also default. -.TP -.BR "int ioctl(int " fd ", LPGETIRQ, int *" arg ) -Stores the currently used IRQ in -.IR arg . -.TP -.BR "int ioctl(int " fd ", LPGETSTATUS, int *" arg ) -Stores the value of the status port in -.IR arg . -The bits have the following meaning: -.TS -l l. -LP_PBUSY inverted busy input, active high -LP_PACK unchanged acknowledge input, active low -LP_POUTPA unchanged out-of-paper input, active high -LP_PSELECD unchanged selected input, active high -LP_PERRORP unchanged error input, active low -.TE -.IP -Refer to your printer manual for the meaning of the signals. -Note that undocumented bits may also be set, depending on your printer. -.TP -.BR "int ioctl(int " fd ", LPRESET)" -Resets the printer. -No argument is used. -.SH FILES -.I /dev/lp* -.\" .SH AUTHORS -.\" The printer driver was originally written by Jim Weigand and Linus -.\" Torvalds. -.\" It was further improved by Michael K.\& Johnson. -.\" The interrupt code was written by Nigel Gamble. -.\" Alan Cox modularized it. -.\" LPCAREFUL, LPABORT, LPGETSTATUS were added by Chris Metcalf. -.SH SEE ALSO -.BR chmod (1), -.BR chown (1), -.BR mknod (1), -.BR lpcntl (8), -.BR tunelp (8) diff --git a/man4/mem.4 b/man4/mem.4 deleted file mode 100644 index cfaa99c..0000000 --- a/man4/mem.4 +++ /dev/null @@ -1,81 +0,0 @@ -.\" Copyright (c) 1993 Michael Haardt (michael@moria.de), -.\" Fri Apr 2 11:32:09 MET DST 1993 -.\" -.\" SPDX-License-Identifier: GPL-2.0-or-later -.\" -.\" Modified Sat Jul 24 16:59:10 1993 by Rik Faith (faith@cs.unc.edu) -.TH mem 4 2023-10-31 "Linux man-pages 6.7" -.SH NAME -mem, kmem, port \- system memory, kernel memory and system ports -.SH DESCRIPTION -.I /dev/mem -is a character device file -that is an image of the main memory of the computer. -It may be used, for example, to examine (and even patch) the system. -.P -Byte addresses in -.I /dev/mem -are interpreted as physical memory addresses. -References to nonexistent locations cause errors to be returned. -.P -Examining and patching is likely to lead to unexpected results -when read-only or write-only bits are present. -.P -Since Linux 2.6.26, and depending on the architecture, the -.B CONFIG_STRICT_DEVMEM -kernel configuration option limits the areas -which can be accessed through this file. -For example: on x86, RAM access is not allowed but accessing -memory-mapped PCI regions is. -.P -It is typically created by: -.P -.in +4n -.EX -mknod \-m 660 /dev/mem c 1 1 -chown root:kmem /dev/mem -.EE -.in -.P -The file -.I /dev/kmem -is the same as -.IR /dev/mem , -except that the kernel virtual memory -rather than physical memory is accessed. -Since Linux 2.6.26, this file is available only if the -.B CONFIG_DEVKMEM -kernel configuration option is enabled. -.P -It is typically created by: -.P -.in +4n -.EX -mknod \-m 640 /dev/kmem c 1 2 -chown root:kmem /dev/kmem -.EE -.in -.P -.I /dev/port -is similar to -.IR /dev/mem , -but the I/O ports are accessed. -.P -It is typically created by: -.P -.in +4n -.EX -mknod \-m 660 /dev/port c 1 4 -chown root:kmem /dev/port -.EE -.in -.SH FILES -.I /dev/mem -.br -.I /dev/kmem -.br -.I /dev/port -.SH SEE ALSO -.BR chown (1), -.BR mknod (1), -.BR ioperm (2) diff --git a/man4/mouse.4 b/man4/mouse.4 deleted file mode 100644 index 21ff1a2..0000000 --- a/man4/mouse.4 +++ /dev/null @@ -1,171 +0,0 @@ -'\" t -.\" This manpage is Copyright (C) 1996 Michael Haardt. -.\" Updates Nov 1998, Andries Brouwer -.\" -.\" SPDX-License-Identifier: Linux-man-pages-copyleft -.TH mouse 4 2023-10-31 "Linux man-pages 6.7" -.SH NAME -mouse \- serial mouse interface -.SH CONFIGURATION -Serial mice are connected to a serial RS232/V24 dialout line, see -.BR ttyS (4) -for a description. -.SH DESCRIPTION -.SS Introduction -The pinout of the usual 9 pin plug as used for serial mice is: -.P -.TS -center; -r c l. -pin name used for -2 RX Data -3 TX \-12 V, Imax = 10 mA -4 DTR +12 V, Imax = 10 mA -7 RTS +12 V, Imax = 10 mA -5 GND Ground -.TE -.P -This is the specification, in fact 9 V suffices with most mice. -.P -The mouse driver can recognize a mouse by dropping RTS to low and raising -it again. -About 14 ms later the mouse will send 0x4D (\[aq]M\[aq]) on the data line. -After a further 63 ms, a Microsoft-compatible 3-button mouse will send -0x33 (\[aq]3\[aq]). -.P -The relative mouse movement is sent as -.I dx -(positive means right) -and -.I dy -(positive means down). -Various mice can operate at different speeds. -To select speeds, cycle through the -speeds 9600, 4800, 2400, and 1200 bit/s, each time writing the two characters -from the table below and waiting 0.1 seconds. -The following table shows available speeds and the strings that select them: -.P -.TS -center; -l l. -bit/s string -9600 *q -4800 *p -2400 *o -1200 *n -.TE -.P -The first byte of a data packet can be used for synchronization purposes. -.SS Microsoft protocol -The -.B Microsoft -protocol uses 1 start bit, 7 data bits, no parity -and one stop bit at the speed of 1200 bits/sec. -Data is sent to RxD in 3-byte packets. -The -.I dx -and -.I dy -movements are sent as -two's-complement, -.I lb -.RI ( rb ) -are set when the left (right) -button is pressed: -.P -.TS -center; -r c c c c c c c. -byte d6 d5 d4 d3 d2 d1 d0 -1 1 lb rb dy7 dy6 dx7 dx6 -2 0 dx5 dx4 dx3 dx2 dx1 dx0 -3 0 dy5 dy4 dy3 dy2 dy1 dy0 -.TE -.SS 3-button Microsoft protocol -Original Microsoft mice only have two buttons. -However, there are some -three button mice which also use the Microsoft protocol. -Pressing or -releasing the middle button is reported by sending a packet with zero -movement and no buttons pressed. -(Thus, unlike for the other two buttons, the status of the middle -button is not reported in each packet.) -.SS Logitech protocol -Logitech serial 3-button mice use a different extension of the -Microsoft protocol: when the middle button is up, the above 3-byte -packet is sent. -When the middle button is down a 4-byte packet is -sent, where the 4th byte has value 0x20 (or at least has the 0x20 -bit set). -In particular, a press of the middle button is reported -as 0,0,0,0x20 when no other buttons are down. -.SS Mousesystems protocol -The -.B Mousesystems -protocol uses 1 start bit, 8 data bits, no parity, -and two stop bits at the speed of 1200 bits/sec. -Data is sent to RxD in -5-byte packets. -.I dx -is sent as the sum of the two two's-complement -values, -.I dy -is send as negated sum of the two two's-complement -values. -.I lb -.RI ( mb , -.IR rb ) -are cleared when the left (middle, -right) button is pressed: -.P -.TS -center; -r c c c c c c c c. -byte d7 d6 d5 d4 d3 d2 d1 d0 -1 1 0 0 0 0 lb mb rb -2 0 dxa6 dxa5 dxa4 dxa3 dxa2 dxa1 dxa0 -3 0 dya6 dya5 dya4 dya3 dya2 dya1 dya0 -4 0 dxb6 dxb5 dxb4 dxb3 dxb2 dxb1 dxb0 -5 0 dyb6 dyb5 dyb4 dyb3 dyb2 dyb1 dyb0 -.TE -.P -Bytes 4 and 5 describe the change that occurred since bytes 2 and 3 -were transmitted. -.SS Sun protocol -The -.B Sun -protocol is the 3-byte version of the above 5-byte -Mousesystems protocol: the last two bytes are not sent. -.SS MM protocol -The -.B MM -protocol uses 1 start bit, 8 data bits, odd parity, and one -stop bit at the speed of 1200 bits/sec. -Data is sent to RxD in 3-byte -packets. -.I dx -and -.I dy -are sent as single signed values, the -sign bit indicating a negative value. -.I lb -.RI ( mb , -.IR rb ) -are -set when the left (middle, right) button is pressed: -.P -.TS -center; -r c c c c c c c c. -byte d7 d6 d5 d4 d3 d2 d1 d0 -1 1 0 0 dxs dys lb mb rb -2 0 dx6 dx5 dx4 dx3 dx2 dx1 dx0 -3 0 dy6 dy5 dy4 dy3 dy2 dy1 dy0 -.TE -.SH FILES -.TP -.I /dev/mouse -A commonly used symbolic link pointing to a mouse device. -.SH SEE ALSO -.BR ttyS (4), -.BR gpm (8) diff --git a/man4/msr.4 b/man4/msr.4 deleted file mode 100644 index 6a6438c..0000000 --- a/man4/msr.4 +++ /dev/null @@ -1,42 +0,0 @@ -.\" Copyright (c) 2009 Intel Corporation, Author Andi Kleen -.\" Some sentences copied from comments in arch/x86/kernel/msr.c -.\" -.\" SPDX-License-Identifier: Linux-man-pages-copyleft -.\" -.TH msr 4 2023-10-31 "Linux man-pages 6.7" -.SH NAME -msr \- x86 CPU MSR access device -.SH DESCRIPTION -.I /dev/cpu/CPUNUM/msr -provides an interface to read and write the model-specific -registers (MSRs) of an x86 CPU. -.I CPUNUM -is the number of the CPU to access as listed in -.IR /proc/cpuinfo . -.P -The register access is done by opening the file and seeking -to the MSR number as offset in the file, and then -reading or writing in chunks of 8 bytes. -An I/O transfer of more than 8 bytes means multiple reads or writes -of the same register. -.P -This file is protected so that it can be read and written only by the user -.IR root , -or members of the group -.IR root . -.SH NOTES -The -.I msr -driver is not auto-loaded. -On modular kernels you might need to use the following command -to load it explicitly before use: -.P -.in +4n -.EX -$ modprobe msr -.EE -.in -.SH SEE ALSO -Intel Corporation Intel 64 and IA-32 Architectures -Software Developer's Manual Volume 3B Appendix B, -for an overview of the Intel CPU MSRs. diff --git a/man4/null.4 b/man4/null.4 deleted file mode 100644 index 0d59e4f..0000000 --- a/man4/null.4 +++ /dev/null @@ -1,52 +0,0 @@ -.\" Copyright (c) 1993 Michael Haardt (michael@moria.de), -.\" Fri Apr 2 11:32:09 MET DST 1993 -.\" -.\" SPDX-License-Identifier: GPL-2.0-or-later -.\" -.\" Modified Sat Jul 24 17:00:12 1993 by Rik Faith (faith@cs.unc.edu) -.TH null 4 2023-10-31 "Linux man-pages 6.7" -.SH NAME -null, zero \- data sink -.SH DESCRIPTION -Data written to the -.I /dev/null -and -.I /dev/zero -special files is discarded. -.P -Reads from -.I /dev/null -always return end of file (i.e., -.BR read (2) -returns 0), whereas reads from -.I /dev/zero -always return bytes containing zero (\[aq]\e0\[aq] characters). -.P -These devices are typically created by: -.P -.in +4n -.EX -mknod \-m 666 /dev/null c 1 3 -mknod \-m 666 /dev/zero c 1 5 -chown root:root /dev/null /dev/zero -.EE -.in -.SH FILES -.I /dev/null -.br -.I /dev/zero -.SH NOTES -If these devices are not writable and readable for all users, many -programs will act strangely. -.P -Since Linux 2.6.31, -.\" commit 2b83868723d090078ac0e2120e06a1cc94dbaef0 -reads from -.I /dev/zero -are interruptible by signals. -(This change was made to help with bad latencies for large reads from -.IR /dev/zero .) -.SH SEE ALSO -.BR chown (1), -.BR mknod (1), -.BR full (4) diff --git a/man4/port.4 b/man4/port.4 deleted file mode 100644 index d4c1762..0000000 --- a/man4/port.4 +++ /dev/null @@ -1 +0,0 @@ -.so man4/mem.4 diff --git a/man4/ptmx.4 b/man4/ptmx.4 deleted file mode 100644 index b50d4e7..0000000 --- a/man4/ptmx.4 +++ /dev/null @@ -1 +0,0 @@ -.so man4/pts.4 diff --git a/man4/pts.4 b/man4/pts.4 deleted file mode 100644 index db778d3..0000000 --- a/man4/pts.4 +++ /dev/null @@ -1,75 +0,0 @@ -.\" This man page was written by Jeremy Phelps . -.\" Notes added - aeb -.\" -.\" %%%LICENSE_START(FREELY_REDISTRIBUTABLE) -.\" Redistribute and revise at will. -.\" %%%LICENSE_END -.\" -.TH pts 4 2023-10-31 "Linux man-pages 6.7" -.SH NAME -ptmx, pts \- pseudoterminal master and slave -.SH DESCRIPTION -The file -.I /dev/ptmx -(the pseudoterminal multiplexor device) -is a character file with major number 5 and -minor number 2, usually with mode 0666 and ownership root:root. -It is used to create a pseudoterminal master and slave pair. -.P -When a process opens -.IR /dev/ptmx , -it gets a file -descriptor for a pseudoterminal master -and a pseudoterminal slave device is created in the -.I /dev/pts -directory. -Each file descriptor obtained by opening -.I /dev/ptmx -is an independent pseudoterminal master with its own associated slave, -whose path can -be found by passing the file descriptor to -.BR ptsname (3). -.P -Before opening the pseudoterminal slave, you must pass the master's file -descriptor to -.BR grantpt (3) -and -.BR unlockpt (3). -.P -Once both the pseudoterminal master and slave are open, the slave provides -processes with an interface that is identical to that of a real terminal. -.P -Data written to the slave is presented on the master file descriptor as input. -Data written to the master is presented to the slave as input. -.P -In practice, pseudoterminals are used for implementing terminal emulators -such as -.BR xterm (1), -in which data read from the pseudoterminal master is interpreted by the -application in the same way -a real terminal would interpret the data, and for implementing remote-login -programs such as -.BR sshd (8), -in which data read from the pseudoterminal master is sent across the network -to a client program that is connected to a terminal or terminal emulator. -.P -Pseudoterminals can also be used to send input to programs that normally -refuse to read input from pipes (such as -.BR su (1), -and -.BR passwd (1)). -.SH FILES -.IR /dev/ptmx , -.I /dev/pts/* -.SH NOTES -The Linux support for the above (known as UNIX 98 pseudoterminal naming) -is done using the -.I devpts -filesystem, which should be mounted on -.IR /dev/pts . -.SH SEE ALSO -.BR getpt (3), -.BR grantpt (3), -.BR ptsname (3), -.BR unlockpt (3), -.BR pty (7) diff --git a/man4/ram.4 b/man4/ram.4 deleted file mode 100644 index 6c4e037..0000000 --- a/man4/ram.4 +++ /dev/null @@ -1,28 +0,0 @@ -.\" Copyright (c) 1993 Michael Haardt (michael@moria.de), -.\" Fri Apr 2 11:32:09 MET DST 1993 -.\" -.\" SPDX-License-Identifier: GPL-2.0-or-later -.\" -.\" Modified Sat Jul 24 17:01:11 1993 by Rik Faith (faith@cs.unc.edu) -.TH ram 4 2023-10-31 "Linux man-pages 6.7" -.SH NAME -ram \- ram disk device -.SH DESCRIPTION -The -.I ram -device is a block device to access the ram disk in raw mode. -.P -It is typically created by: -.P -.in +4n -.EX -mknod \-m 660 /dev/ram b 1 1 -chown root:disk /dev/ram -.EE -.in -.SH FILES -.I /dev/ram -.SH SEE ALSO -.BR chown (1), -.BR mknod (1), -.BR mount (8) diff --git a/man4/random.4 b/man4/random.4 deleted file mode 100644 index 7a1d15d..0000000 --- a/man4/random.4 +++ /dev/null @@ -1,349 +0,0 @@ -.\" Copyright (c) 1997 John S. Kallal (kallal@voicenet.com) -.\" -.\" SPDX-License-Identifier: GPL-2.0-or-later -.\" -.\" Some changes by tytso and aeb. -.\" -.\" 2004-12-16, John V. Belmonte/mtk, Updated init and quit scripts -.\" 2004-04-08, AEB, Improved description of read from /dev/urandom -.\" 2008-06-20, George Spelvin , -.\" Matt Mackall -.\" -.TH random 4 2023-10-31 "Linux man-pages 6.7" -.SH NAME -random, urandom \- kernel random number source devices -.SH SYNOPSIS -.nf -#include -.P -.BI "int ioctl(" fd ", RND" request ", " param ");" -.fi -.SH DESCRIPTION -The character special files \fI/dev/random\fP and -\fI/dev/urandom\fP (present since Linux 1.3.30) -provide an interface to the kernel's random number generator. -The file -.I /dev/random -has major device number 1 and minor device number 8. -The file -.I /dev/urandom -has major device number 1 and minor device number 9. -.P -The random number generator gathers environmental noise -from device drivers and other sources into an entropy pool. -The generator also keeps an estimate of the -number of bits of noise in the entropy pool. -From this entropy pool, random numbers are created. -.P -Linux 3.17 and later provides the simpler and safer -.BR getrandom (2) -interface which requires no special files; -see the -.BR getrandom (2) -manual page for details. -.P -When read, the -.I /dev/urandom -device returns random bytes using a pseudorandom -number generator seeded from the entropy pool. -Reads from this device do not block (i.e., the CPU is not yielded), -but can incur an appreciable delay when requesting large amounts of data. -.P -When read during early boot time, -.I /dev/urandom -may return data prior to the entropy pool being initialized. -.\" This is a real problem; see -.\" commit 9b4d008787f864f17d008c9c15bbe8a0f7e2fc24 -If this is of concern in your application, use -.BR getrandom (2) -or \fI/dev/random\fP instead. -.P -The \fI/dev/random\fP device is a legacy interface which dates back to -a time where the cryptographic primitives used in the implementation -of \fI/dev/urandom\fP were not widely trusted. -It will return random bytes only within the estimated number of -bits of fresh noise in the entropy pool, blocking if necessary. -\fI/dev/random\fP is suitable for applications that need -high quality randomness, and can afford indeterminate delays. -.P -When the entropy pool is empty, reads from \fI/dev/random\fP will block -until additional environmental noise is gathered. -Since Linux 5.6, the -.B O_NONBLOCK -flag is ignored as -.I /dev/random -will no longer block except during early boot process. -In earlier versions, if -.BR open (2) -is called for -.I /dev/random -with the -.B O_NONBLOCK -flag, a subsequent -.BR read (2) -will not block if the requested number of bytes is not available. -Instead, the available bytes are returned. -If no byte is available, -.BR read (2) -will return \-1 and -.I errno -will be set to -.BR EAGAIN . -.P -The -.B O_NONBLOCK -flag has no effect when opening -.IR /dev/urandom . -When calling -.BR read (2) -for the device -.IR /dev/urandom , -reads of up to 256 bytes will return as many bytes as are requested -and will not be interrupted by a signal handler. -Reads with a buffer over this limit may return less than the -requested number of bytes or fail with the error -.BR EINTR , -if interrupted by a signal handler. -.P -Since Linux 3.16, -.\" commit 79a8468747c5f95ed3d5ce8376a3e82e0c5857fc -a -.BR read (2) -from -.I /dev/urandom -will return at most 32\ MB. -A -.BR read (2) -from -.I /dev/random -will return at most 512 bytes -.\" SEC_XFER_SIZE in drivers/char/random.c -(340 bytes before Linux 2.6.12). -.P -Writing to \fI/dev/random\fP or \fI/dev/urandom\fP will update the -entropy pool with the data written, but this will not result in a -higher entropy count. -This means that it will impact the contents -read from both files, but it will not make reads from -\fI/dev/random\fP faster. -.SS Usage -The -.I /dev/random -interface is considered a legacy interface, and -.I /dev/urandom -is preferred and sufficient in all use cases, with the exception of -applications which require randomness during early boot time; for -these applications, -.BR getrandom (2) -must be used instead, -because it will block until the entropy pool is initialized. -.P -If a seed file is saved across reboots as recommended below, -the output is -cryptographically secure against attackers without local root access as -soon as it is reloaded in the boot sequence, and perfectly adequate for -network encryption session keys. -(All major Linux distributions have saved the seed file across reboots -since 2000 at least.) -Since reads from -.I /dev/random -may block, users will usually want to open it in nonblocking mode -(or perform a read with timeout), -and provide some sort of user notification if the desired -entropy is not immediately available. -.\" -.SS Configuration -If your system does not have -\fI/dev/random\fP and \fI/dev/urandom\fP created already, they -can be created with the following commands: -.P -.in +4n -.EX -mknod \-m 666 /dev/random c 1 8 -mknod \-m 666 /dev/urandom c 1 9 -chown root:root /dev/random /dev/urandom -.EE -.in -.P -When a Linux system starts up without much operator interaction, -the entropy pool may be in a fairly predictable state. -This reduces the actual amount of noise in the entropy pool -below the estimate. -In order to counteract this effect, it helps to carry -entropy pool information across shut-downs and start-ups. -To do this, add the lines to an appropriate script -which is run during the Linux system start-up sequence: -.P -.in +4n -.EX -echo "Initializing random number generator..." -random_seed=/var/run/random\-seed -# Carry a random seed from start\-up to start\-up -# Load and then save the whole entropy pool -if [ \-f $random_seed ]; then - cat $random_seed >/dev/urandom -else - touch $random_seed -fi -chmod 600 $random_seed -poolfile=/proc/sys/kernel/random/poolsize -[ \-r $poolfile ] && bits=$(cat $poolfile) || bits=4096 -bytes=$(expr $bits / 8) -dd if=/dev/urandom of=$random_seed count=1 bs=$bytes -.EE -.in -.P -Also, add the following lines in an appropriate script which is -run during the Linux system shutdown: -.P -.in +4n -.EX -# Carry a random seed from shut\-down to start\-up -# Save the whole entropy pool -echo "Saving random seed..." -random_seed=/var/run/random\-seed -touch $random_seed -chmod 600 $random_seed -poolfile=/proc/sys/kernel/random/poolsize -[ \-r $poolfile ] && bits=$(cat $poolfile) || bits=4096 -bytes=$(expr $bits / 8) -dd if=/dev/urandom of=$random_seed count=1 bs=$bytes -.EE -.in -.P -In the above examples, we assume Linux 2.6.0 or later, where -.I /proc/sys/kernel/random/poolsize -returns the size of the entropy pool in bits (see below). -.\" -.SS /proc interfaces -The files in the directory -.I /proc/sys/kernel/random -(present since Linux 2.3.16) provide additional information about the -.I /dev/random -device: -.TP -.I entropy_avail -This read-only file gives the available entropy, in bits. -This will be a number in the range 0 to 4096. -.TP -.I poolsize -This file -gives the size of the entropy pool. -The semantics of this file vary across kernel versions: -.RS -.TP -Linux 2.4: -This file gives the size of the entropy pool in -.IR bytes . -Normally, this file will have the value 512, but it is writable, -and can be changed to any value for which an algorithm is available. -The choices are 32, 64, 128, 256, 512, 1024, or 2048. -.TP -Linux 2.6 and later: -This file is read-only, and gives the size of the entropy pool in -.IR bits . -It contains the value 4096. -.RE -.TP -.I read_wakeup_threshold -This file -contains the number of bits of entropy required for waking up processes -that sleep waiting for entropy from -.IR /dev/random . -The default is 64. -.TP -.I write_wakeup_threshold -This file -contains the number of bits of entropy below which we wake up -processes that do a -.BR select (2) -or -.BR poll (2) -for write access to -.IR /dev/random . -These values can be changed by writing to the files. -.TP -.IR uuid " and " boot_id -These read-only files -contain random strings like 6fd5a44b\-35f4\-4ad4\-a9b9\-6b9be13e1fe9. -The former is generated afresh for each read, the latter was -generated once. -.\" -.SS ioctl(2) interface -The following -.BR ioctl (2) -requests are defined on file descriptors connected to either \fI/dev/random\fP -or \fI/dev/urandom\fP. -All requests performed will interact with the input -entropy pool impacting both \fI/dev/random\fP and \fI/dev/urandom\fP. -The -.B CAP_SYS_ADMIN -capability is required for all requests except -.BR RNDGETENTCNT . -.TP -.B RNDGETENTCNT -Retrieve the entropy count of the input pool, the contents will be the same -as the -.I entropy_avail -file under proc. -The result will be stored in the int pointed to by the argument. -.TP -.B RNDADDTOENTCNT -Increment or decrement the entropy count of the input pool -by the value pointed to by the argument. -.TP -.B RNDGETPOOL -Removed in Linux 2.6.9. -.TP -.B RNDADDENTROPY -Add some additional entropy to the input pool, -incrementing the entropy count. -This differs from writing to \fI/dev/random\fP or \fI/dev/urandom\fP, -which only adds some -data but does not increment the entropy count. -The following structure is used: -.IP -.in +4n -.EX -struct rand_pool_info { - int entropy_count; - int buf_size; - __u32 buf[0]; -}; -.EE -.in -.IP -Here -.I entropy_count -is the value added to (or subtracted from) the entropy count, and -.I buf -is the buffer of size -.I buf_size -which gets added to the entropy pool. -.TP -.B RNDZAPENTCNT -.TQ -.B RNDCLEARPOOL -Zero the entropy count of all pools and add some system data (such as -wall clock) to the pools. -.SH FILES -.I /dev/random -.br -.I /dev/urandom -.SH NOTES -For an overview and comparison of the various interfaces that -can be used to obtain randomness, see -.BR random (7). -.SH BUGS -During early boot time, reads from -.I /dev/urandom -may return data prior to the entropy pool being initialized. -.\" .SH AUTHOR -.\" The kernel's random number generator was written by -.\" Theodore Ts'o (tytso@athena.mit.edu). -.SH SEE ALSO -.BR mknod (1), -.BR getrandom (2), -.BR random (7) -.P -RFC\ 1750, "Randomness Recommendations for Security" diff --git a/man4/rtc.4 b/man4/rtc.4 deleted file mode 100644 index 5a04a7b..0000000 --- a/man4/rtc.4 +++ /dev/null @@ -1,347 +0,0 @@ -.\" rtc.4 -.\" Copyright 2002 Urs Thuermann (urs@isnogud.escape.de) -.\" -.\" SPDX-License-Identifier: GPL-2.0-or-later -.\" -.\" $Id: rtc.4,v 1.4 2005/12/05 17:19:49 urs Exp $ -.\" -.\" 2006-02-08 Various additions by mtk -.\" 2006-11-26 cleanup, cover the generic rtc framework; David Brownell -.\" -.TH rtc 4 2023-10-31 "Linux man-pages 6.7" -.SH NAME -rtc \- real-time clock -.SH SYNOPSIS -.nf -#include -.P -.BI "int ioctl(" fd ", RTC_" request ", " param ");" -.fi -.SH DESCRIPTION -This is the interface to drivers for real-time clocks (RTCs). -.P -Most computers have one or more hardware clocks which record the -current "wall clock" time. -These are called "Real Time Clocks" (RTCs). -One of these usually has battery backup power so that it tracks the time -even while the computer is turned off. -RTCs often provide alarms and other interrupts. -.P -All i386 PCs, and ACPI-based systems, have an RTC that is compatible with -the Motorola MC146818 chip on the original PC/AT. -Today such an RTC is usually integrated into the mainboard's chipset -(south bridge), and uses a replaceable coin-sized backup battery. -.P -Non-PC systems, such as embedded systems built around system-on-chip -processors, use other implementations. -They usually won't offer the same functionality as the RTC from a PC/AT. -.SS RTC vs system clock -RTCs should not be confused with the system clock, which is -a software clock maintained by the kernel and used to implement -.BR gettimeofday (2) -and -.BR time (2), -as well as setting timestamps on files, and so on. -The system clock reports seconds and microseconds since a start point, -defined to be the POSIX Epoch: 1970-01-01 00:00:00 +0000 (UTC). -(One common implementation counts timer interrupts, once -per "jiffy", at a frequency of 100, 250, or 1000 Hz.) -That is, it is supposed to report wall clock time, which RTCs also do. -.P -A key difference between an RTC and the system clock is that RTCs -run even when the system is in a low power state (including "off"), -and the system clock can't. -Until it is initialized, the system clock can only report time since -system boot ... not since the POSIX Epoch. -So at boot time, and after resuming from a system low power state, the -system clock will often be set to the current wall clock time using an RTC. -Systems without an RTC need to set the system clock using another clock, -maybe across the network or by entering that data manually. -.SS RTC functionality -RTCs can be read and written with -.BR hwclock (8), -or directly with the -.BR ioctl (2) -requests listed below. -.P -Besides tracking the date and time, many RTCs can also generate -interrupts -.IP \[bu] 3 -on every clock update (i.e., once per second); -.IP \[bu] -at periodic intervals with a frequency that can be set to -any power-of-2 multiple in the range 2 Hz to 8192 Hz; -.IP \[bu] -on reaching a previously specified alarm time. -.P -Each of those interrupt sources can be enabled or disabled separately. -On many systems, the alarm interrupt can be configured as a system wakeup -event, which can resume the system from a low power state such as -Suspend-to-RAM (STR, called S3 in ACPI systems), -Hibernation (called S4 in ACPI systems), -or even "off" (called S5 in ACPI systems). -On some systems, the battery backed RTC can't issue -interrupts, but another one can. -.P -The -.I /dev/rtc -(or -.IR /dev/rtc0 , -.IR /dev/rtc1 , -etc.) -device can be opened only once (until it is closed) and it is read-only. -On -.BR read (2) -and -.BR select (2) -the calling process is blocked until the next interrupt from that RTC -is received. -Following the interrupt, the process can read a long integer, of which -the least significant byte contains a bit mask encoding -the types of interrupt that occurred, -while the remaining 3 bytes contain the number of interrupts since the -last -.BR read (2). -.SS ioctl(2) interface -The following -.BR ioctl (2) -requests are defined on file descriptors connected to RTC devices: -.TP -.B RTC_RD_TIME -Returns this RTC's time in the following structure: -.IP -.in +4n -.EX -struct rtc_time { - int tm_sec; - int tm_min; - int tm_hour; - int tm_mday; - int tm_mon; - int tm_year; - int tm_wday; /* unused */ - int tm_yday; /* unused */ - int tm_isdst; /* unused */ -}; -.EE -.in -.IP -The fields in this structure have the same meaning and ranges as for the -.I tm -structure described in -.BR gmtime (3). -A pointer to this structure should be passed as the third -.BR ioctl (2) -argument. -.TP -.B RTC_SET_TIME -Sets this RTC's time to the time specified by the -.I rtc_time -structure pointed to by the third -.BR ioctl (2) -argument. -To set the -RTC's time the process must be privileged (i.e., have the -.B CAP_SYS_TIME -capability). -.TP -.B RTC_ALM_READ -.TQ -.B RTC_ALM_SET -Read and set the alarm time, for RTCs that support alarms. -The alarm interrupt must be separately enabled or disabled using the -.BR RTC_AIE_ON ", " RTC_AIE_OFF -requests. -The third -.BR ioctl (2) -argument is a pointer to an -.I rtc_time -structure. -Only the -.IR tm_sec , -.IR tm_min , -and -.I tm_hour -fields of this structure are used. -.TP -.B RTC_IRQP_READ -.TQ -.B RTC_IRQP_SET -Read and set the frequency for periodic interrupts, -for RTCs that support periodic interrupts. -The periodic interrupt must be separately enabled or disabled using the -.BR RTC_PIE_ON ", " RTC_PIE_OFF -requests. -The third -.BR ioctl (2) -argument is an -.I "unsigned long\ *" -or an -.IR "unsigned long" , -respectively. -The value is the frequency in interrupts per second. -The set of allowable frequencies is the multiples of two -in the range 2 to 8192. -Only a privileged process (i.e., one having the -.B CAP_SYS_RESOURCE -capability) can set frequencies above the value specified in -.IR /proc/sys/dev/rtc/max\-user\-freq . -(This file contains the value 64 by default.) -.TP -.B RTC_AIE_ON -.TQ -.B RTC_AIE_OFF -Enable or disable the alarm interrupt, for RTCs that support alarms. -The third -.BR ioctl (2) -argument is ignored. -.TP -.B RTC_UIE_ON -.TQ -.B RTC_UIE_OFF -Enable or disable the interrupt on every clock update, -for RTCs that support this once-per-second interrupt. -The third -.BR ioctl (2) -argument is ignored. -.TP -.B RTC_PIE_ON -.TQ -.B RTC_PIE_OFF -Enable or disable the periodic interrupt, -for RTCs that support these periodic interrupts. -The third -.BR ioctl (2) -argument is ignored. -Only a privileged process (i.e., one having the -.B CAP_SYS_RESOURCE -capability) can enable the periodic interrupt if the frequency is -currently set above the value specified in -.IR /proc/sys/dev/rtc/max\-user\-freq . -.TP -.B RTC_EPOCH_READ -.TQ -.B RTC_EPOCH_SET -Many RTCs encode the year in an 8-bit register which is either -interpreted as an 8-bit binary number or as a BCD number. -In both cases, -the number is interpreted relative to this RTC's Epoch. -The RTC's Epoch is -initialized to 1900 on most systems but on Alpha and MIPS it might -also be initialized to 1952, 1980, or 2000, depending on the value of -an RTC register for the year. -With some RTCs, -these operations can be used to read or to set the RTC's Epoch, -respectively. -The third -.BR ioctl (2) -argument is an -.I "unsigned long\ *" -or an -.IR "unsigned long" , -respectively, and the value returned (or assigned) is the Epoch. -To set the RTC's Epoch the process must be privileged (i.e., have the -.B CAP_SYS_TIME -capability). -.TP -.B RTC_WKALM_RD -.TQ -.B RTC_WKALM_SET -Some RTCs support a more powerful alarm interface, using these ioctls -to read or write the RTC's alarm time (respectively) with this structure: -.P -.RS -.in +4n -.EX -struct rtc_wkalrm { - unsigned char enabled; - unsigned char pending; - struct rtc_time time; -}; -.EE -.in -.RE -.IP -The -.I enabled -flag is used to enable or disable the alarm interrupt, -or to read its current status; when using these calls, -.BR RTC_AIE_ON " and " RTC_AIE_OFF -are not used. -The -.I pending -flag is used by -.B RTC_WKALM_RD -to report a pending interrupt -(so it's mostly useless on Linux, except when talking -to the RTC managed by EFI firmware). -The -.I time -field is as used with -.B RTC_ALM_READ -and -.B RTC_ALM_SET -except that the -.IR tm_mday , -.IR tm_mon , -and -.I tm_year -fields are also valid. -A pointer to this structure should be passed as the third -.BR ioctl (2) -argument. -.SH FILES -.TP -.I /dev/rtc -.TQ -.I /dev/rtc0 -.TQ -.I /dev/rtc1 -.TQ -\&.\|.\|. -RTC special character device files. -.TP -.I /proc/driver/rtc -status of the (first) RTC. -.SH NOTES -When the kernel's system time is synchronized with an external -reference using -.BR adjtimex (2) -it will update a designated RTC periodically every 11 minutes. -To do so, the kernel has to briefly turn off periodic interrupts; -this might affect programs using that RTC. -.P -An RTC's Epoch has nothing to do with the POSIX Epoch which is -used only for the system clock. -.P -If the year according to the RTC's Epoch and the year register is -less than 1970 it is assumed to be 100 years later, that is, between 2000 -and 2069. -.P -Some RTCs support "wildcard" values in alarm fields, to support -scenarios like periodic alarms at fifteen minutes after every hour, -or on the first day of each month. -Such usage is nonportable; -portable user-space code expects only a single alarm interrupt, and -will either disable or reinitialize the alarm after receiving it. -.P -Some RTCs support periodic interrupts with periods that are multiples -of a second rather than fractions of a second; -multiple alarms; -programmable output clock signals; -nonvolatile memory; -and other hardware -capabilities that are not currently exposed by this API. -.SH SEE ALSO -.BR date (1), -.BR adjtimex (2), -.BR gettimeofday (2), -.BR settimeofday (2), -.BR stime (2), -.BR time (2), -.BR gmtime (3), -.BR time (7), -.BR hwclock (8) -.P -.I Documentation/rtc.txt -in the Linux kernel source tree diff --git a/man4/sd.4 b/man4/sd.4 deleted file mode 100644 index a2bf814..0000000 --- a/man4/sd.4 +++ /dev/null @@ -1,117 +0,0 @@ -.\" sd.4 -.\" Copyright 1992 Rickard E. Faith (faith@cs.unc.edu) -.\" -.\" SPDX-License-Identifier: Linux-man-pages-copyleft -.\" -.TH sd 4 2023-10-31 "Linux man-pages 6.7" -.SH NAME -sd \- driver for SCSI disk drives -.SH SYNOPSIS -.nf -.BR "#include " "/* for HDIO_GETGEO */" -.BR "#include " "/* for BLKGETSIZE and BLKRRPART */" -.fi -.SH CONFIGURATION -The block device name has the following form: -.BI sd lp, -where -.I l -is a letter denoting the physical drive, and -.I p -is a number denoting the partition on that physical drive. -Often, the partition number, -.IR p , -will be left off when the device corresponds to the whole drive. -.P -SCSI disks have a major device number of 8, and a minor device number of -the form (16 * -.IR drive_number ") + " partition_number , -where -.I drive_number -is the number of the physical drive in order of detection, and -.I partition_number -is as follows: -.IP \[bu] 3 -partition 0 is the whole drive -.IP \[bu] -partitions 1\[en]4 are the DOS "primary" partitions -.IP \[bu] -partitions 5\[en]8 are the DOS "extended" (or "logical") partitions -.P -For example, -.I /dev/sda -will have major 8, minor 0, and will refer to all of the first SCSI drive -in the system; and -.I /dev/sdb3 -will have major 8, minor 19, and will refer to the third DOS "primary" -partition on the second SCSI drive in the system. -.P -At this time, only block devices are provided. -Raw devices have not yet been implemented. -.SH DESCRIPTION -The following -.IR ioctl s -are provided: -.TP -.B HDIO_GETGEO -Returns the BIOS disk parameters in the following structure: -.P -.in +4n -.EX -struct hd_geometry { - unsigned char heads; - unsigned char sectors; - unsigned short cylinders; - unsigned long start; -}; -.EE -.in -.IP -A pointer to this structure is passed as the -.BR ioctl (2) -parameter. -.IP -The information returned in the parameter is the disk geometry of the drive -.I "as understood by DOS!" -This geometry is -.I not -the physical geometry of the drive. -It is used when constructing the -drive's partition table, however, and is needed for convenient operation -of -.BR fdisk (1), -.BR efdisk (1), -and -.BR lilo (1). -If the geometry information is not available, zero will be returned for all -of the parameters. -.TP -.B BLKGETSIZE -Returns the device size in sectors. -The -.BR ioctl (2) -parameter should be a pointer to a -.IR long . -.TP -.B BLKRRPART -Forces a reread of the SCSI disk partition tables. -No parameter is needed. -.IP -The SCSI -.BR ioctl (2) -operations are also supported. -If the -.BR ioctl (2) -parameter is required, and it is NULL, then -.BR ioctl (2) -fails with the error -.BR EINVAL . -.SH FILES -.TP -.I /dev/sd[a\-h] -the whole device -.TP -.I /dev/sd[a\-h][0\-8] -individual block partitions -.\".SH SEE ALSO -.\".BR scsi (4) diff --git a/man4/sk98lin.4 b/man4/sk98lin.4 deleted file mode 100644 index 808a769..0000000 --- a/man4/sk98lin.4 +++ /dev/null @@ -1,580 +0,0 @@ -'\" t -.\" (C)Copyright 1999-2003 Marvell(R) -- linux@syskonnect.de -.\" sk98lin.4 1.1 2003/12/17 10:03:18 -.\" -.\" SPDX-License-Identifier: GPL-2.0-or-later -.\" -.\" This manpage can be viewed using `groff -Tascii -man sk98lin.4 | less` -.\" -.TH sk98lin 4 2023-10-31 "Linux man-pages 6.7" -.SH NAME -sk98lin \- Marvell/SysKonnect Gigabit Ethernet driver v6.21 -.SH SYNOPSIS -.B insmod sk98lin.o -.RB [ Speed_A=\c -.IR i,j,... ] -.RB [ Speed_B=\c -.IR i,j,... ] -.RB [ AutoNeg_A=\c -.IR i,j,... ] -.RB [ AutoNeg_B=\c -.IR i,j,... ] -.RB [ DupCap_A=\c -.IR i,j,... ] -.RB [ DupCap_B=\c -.IR i,j,... ] -.RB [ FlowCtrl_A=\c -.IR i,j,... ] -.RB [ FlowCtrl_B=\c -.IR i,j,... ] -.RB [ Role_A=\c -.IR i,j,... ] -.RB [ Role_B=\c -.IR i,j,... ] -.RB [ ConType=\c -.IR i,j,... ] -.RB [ Moderation=\c -.IR i,j,... ] -.RB [ IntsPerSec=\c -.IR i,j,... ] -.RB [ PrefPort=\c -.IR i,j,... ] -.RB [ RlmtMode=\c -.IR i,j,... ] -.SH DESCRIPTION -.ad l -.hy 0 -.BR Note : -This obsolete driver was removed in Linux 2.6.26. -.P -.B sk98lin -is the Gigabit Ethernet driver for -Marvell and SysKonnect network adapter cards. -It supports SysKonnect SK-98xx/SK-95xx -compliant Gigabit Ethernet Adapter and -any Yukon compliant chipset. -.P -When loading the driver using insmod, -parameters for the network adapter cards -might be stated as a sequence of comma separated commands. -If for instance two network adapters are installed and AutoNegotiation on -Port A of the first adapter should be ON, -but on the Port A of the second adapter switched OFF, one must enter: -.P -.in +4n -.EX -insmod sk98lin.o AutoNeg_A=On,Off -.EE -.in -.P -After -.B sk98lin -is bound to one or more adapter cards and the -.I /proc -filesystem is mounted on your system, a dedicated statistics file -will be created in the folder -.I /proc/net/sk98lin -for all ports of the installed network adapter cards. -Those files are named -.IR eth[x] , -where -.I x -is the number of the interface that has been assigned to a -dedicated port by the system. -.P -If loading is finished, any desired IP address can be -assigned to the respective -.I eth[x] -interface using the -.BR ifconfig (8) -command. -This causes the adapter to connect to the Ethernet and to display a status -message on the console saying "ethx: network connection up using port y" -followed by the configured or detected connection parameters. -.P -The -.B sk98lin -also supports large frames (also called jumbo frames). -Using jumbo frames can improve throughput tremendously when -transferring large amounts of data. -To enable large frames, the MTU (maximum transfer unit) size -for an interface is to be set to a high value. -The default MTU size is 1500 and can be changed up to 9000 (bytes). -Setting the MTU size can be done when assigning the IP address -to the interface or later by using the -.BR ifconfig (8) -command with the mtu parameter. -If for instance eth0 needs an IP -address and a large frame MTU size, -the following two commands might be used: -.P -.in +4n -.EX -ifconfig eth0 10.1.1.1 -ifconfig eth0 mtu 9000 -.EE -.in -.P -Those two commands might even be combined into one: -.P -.in +4n -.EX -ifconfig eth0 10.1.1.1 mtu 9000 -.EE -.in -.P -Note that large frames can be used only if permitted by -your network infrastructure. -This means, that any switch being used in your Ethernet must -also support large frames. -Quite some switches support large frames, -but need to be configured to do so. -Most of the times, their default setting is to support only -standard frames with an MTU size of 1500 (bytes). -In addition to the switches inside the network, -all network adapters that are to be used must also be -enabled regarding jumbo frames. -If an adapter is not set to receive large frames, it will simply drop them. -.P -Switching back to the standard Ethernet frame size can be done by using the -.BR ifconfig (8) -command again: -.P -.in +4n -.EX -ifconfig eth0 mtu 1500 -.EE -.in -.P -The Marvell/SysKonnect Gigabit Ethernet driver for Linux is able to -support VLAN and Link Aggregation according to -IEEE standards 802.1, 802.1q, and 802.3ad. -Those features are available only after installation of open source modules -which can be found on the Internet: -.P -.IR VLAN : -.UR http://www.candelatech.com\:/\[ti]greear\:/vlan.html -.UE -.br -.I Link -.IR Aggregation : -.UR http://www.st.rim.or.jp\:/\[ti]yumo -.UE -.P -Note that Marvell/SysKonnect does not offer any support for these -open source modules and does not take the responsibility for any -kind of failures or problems arising when using these modules. -.SS Parameters -.TP -.BI Speed_A= i,j,... -This parameter is used to set the speed capabilities of port A of an -adapter card. -It is valid only for Yukon copper adapters. -Possible values are: -.IR 10 , -.IR 100 , -.IR 1000 , -or -.IR Auto ; -.I Auto -is the default. -Usually, the speed is negotiated between the two ports -during link establishment. -If this fails, -a port can be forced to a specific setting with this parameter. -.TP -.BI Speed_B= i,j,... -This parameter is used to set the speed capabilities of port B of -an adapter card. -It is valid only for Yukon copper adapters. -Possible values are: -.IR 10 , -.IR 100 , -.IR 1000 , -or -.IR Auto ; -.I Auto -is the default. -Usually, the speed is negotiated between the two ports during link -establishment. -If this fails, -a port can be forced to a specific setting with this parameter. -.TP -.BI AutoNeg_A= i,j,... -Enables or disables the use of autonegotiation of port A of an adapter card. -Possible values are: -.IR On , -.IR Off , -or -.IR Sense ; -.I On -is the default. -The -.I Sense -mode automatically detects whether the link partner supports -auto-negotiation or not. -.TP -.BI AutoNeg_B= i,j,... -Enables or disables the use of autonegotiation of port B of an adapter card. -Possible values are: -.IR On , -.IR Off , -or -.IR Sense ; -.I On -is the default. -The -.I Sense -mode automatically detects whether the link partner supports -auto-negotiation or not. -.TP -.BI DupCap_A= i,j,... -This parameter indicates the duplex mode to be used for port A -of an adapter card. -Possible values are: -.IR Half , -.IR Full , -or -.IR Both ; -.I Both -is the default. -This parameter is relevant only if AutoNeg_A of port A is not set to -.IR Sense . -If AutoNeg_A is set to -.IR On , -all three values of DupCap_A ( -.IR Half , -.IR Full , -or -.IR Both ) -might be stated. -If AutoNeg_A is set to -.IR Off , -only DupCap_A values -.I Full -and -.I Half -are allowed. -This DupCap_A parameter is useful if your link partner does not -support all possible duplex combinations. -.TP -.BI DupCap_B= i,j,... -This parameter indicates the duplex mode to be used for port B -of an adapter card. -Possible values are: -.IR Half , -.IR Full , -or -.IR Both ; -.I Both -is the default. -This parameter is relevant only if AutoNeg_B of port B is not set to -.IR Sense . -If AutoNeg_B is set to -.IR On , -all three values of DupCap_B ( -.IR Half , -.IR Full , -or -.IR Both ) -might be stated. -If AutoNeg_B is set to -.IR Off , -only DupCap_B values -.I Full -and -.I Half -are allowed. -This DupCap_B parameter is useful if your link partner does not -support all possible duplex combinations. -.TP -.BI FlowCtrl_A= i,j,... -This parameter can be used to set the flow control capabilities the -port reports during auto-negotiation. -Possible values are: -.IR Sym , -.IR SymOrRem , -.IR LocSend , -or -.IR None ; -.I SymOrRem -is the default. -The different modes have the following meaning: -.RS -.TP -.IR Sym " = Symmetric" -Both link partners are allowed to send PAUSE frames. -.TP -.IR SymOrRem " = SymmetricOrRemote" -Both or only remote partner are allowed to send PAUSE frames. -.TP -.IR LocSend " = LocalSend" -Only local link partner is allowed to send PAUSE frames. -.TP -.IR None " = None" -No link partner is allowed to send PAUSE frames. -.RE -.IP -Note that this parameter is ignored if AutoNeg_A is set to -.IR Off . -.TP -.BI FlowCtrl_B= i,j,... -This parameter can be used to set the flow control capabilities the -port reports during auto-negotiation. -Possible values are: -.IR Sym , -.IR SymOrRem , -.IR LocSend , -or -.IR None ; -.I SymOrRem -is the default. -The different modes have the following meaning: -.RS -.TP -.IR Sym " = Symmetric" -Both link partners are allowed to send PAUSE frames. -.TP -.IR SymOrRem " = SymmetricOrRemote" -Both or only remote partner are allowed to send PAUSE frames. -.TP -.IR LocSend " = LocalSend" -Only local link partner is allowed to send PAUSE frames. -.TP -.IR None " = None" -No link partner is allowed to send PAUSE frames. -.RE -.IP -Note that this parameter is ignored if AutoNeg_B is set to -.IR Off . -.TP -.BI Role_A= i,j,... -This parameter is valid only for 1000Base-T adapter cards. -For two 1000Base-T ports to communicate, -one must take the role of the master (providing timing information), -while the other must be the slave. -Possible values are: -.IR Auto , -.IR Master , -or -.IR Slave ; -.I Auto -is the default. -Usually, the role of a port is negotiated between two ports during -link establishment, but if that fails the port A of an adapter card -can be forced to a specific setting with this parameter. -.TP -.BI Role_B= i,j,... -This parameter is valid only for 1000Base-T adapter cards. -For two 1000Base-T ports to communicate, one must take -the role of the master (providing timing information), -while the other must be the slave. -Possible values are: -.IR Auto , -.IR Master , -or -.IR Slave ; -.I Auto -is the default. -Usually, the role of a port is negotiated between -two ports during link establishment, but if that fails -the port B of an adapter card can be forced to a -specific setting with this parameter. -.TP -.BI ConType= i,j,... -This parameter is a combination of all five per-port parameters -within one single parameter. -This simplifies the configuration of both ports of an adapter card. -The different values of this variable reflect the -most meaningful combinations of port parameters. -Possible values and their corresponding combination of per-port parameters: -.IP -.TS -lb lb lb lb lb lb -l l l l l l. -ConType DupCap AutoNeg FlowCtrl Role Speed -\fIAuto\fP Both On SymOrRem Auto Auto -\fI100FD\fP Full Off None Auto 100 -\fI100HD\fP Half Off None Auto 100 -\fI10FD\fP Full Off None Auto 10 -\fI10HD\fP Half Off None Auto 10 -.TE -.IP -Stating any other port parameter together with this -.I ConType -parameter will result in a merged configuration of those settings. -This is due to -the fact, that the per-port parameters (e.g., -.IR Speed_A ) -have a higher priority than the combined variable -.IR ConType . -.TP -.BI Moderation= i,j,... -Interrupt moderation is employed to limit the maximum number of interrupts -the driver has to serve. -That is, one or more interrupts (which indicate any transmit or -receive packet to be processed) are queued until the driver processes them. -When queued interrupts are to be served, is determined by the -.I IntsPerSec -parameter, which is explained later below. -Possible moderation modes are: -.IR None , -.IR Static , -or -.IR Dynamic ; -.I None -is the default. -The different modes have the following meaning: -.IP -.I None -No interrupt moderation is applied on the adapter card. -Therefore, each transmit or receive interrupt is served immediately -as soon as it appears on the interrupt line of the adapter card. -.IP -.I Static -Interrupt moderation is applied on the adapter card. -All transmit and receive interrupts are queued until -a complete moderation interval ends. -If such a moderation interval ends, all queued interrupts -are processed in one big bunch without any delay. -The term -.I Static -reflects the fact, that interrupt moderation is always enabled, -regardless how much network load is currently passing via a -particular interface. -In addition, the duration of the moderation interval has a fixed -length that never changes while the driver is operational. -.IP -.I Dynamic -Interrupt moderation might be applied on the adapter card, -depending on the load of the system. -If the driver detects that the system load is too high, -the driver tries to shield the system against too much network -load by enabling interrupt moderation. -If\[em]at a later time\[em]the CPU utilization decreases -again (or if the network load is negligible), the interrupt -moderation will automatically be disabled. -.IP -Interrupt moderation should be used when the driver has to -handle one or more interfaces with a high network load, -which\[em]as a consequence\[em]leads also to a high CPU utilization. -When moderation is applied in such high network load situations, -CPU load might be reduced by 20\[en]30% on slow computers. -.IP -Note that the drawback of using interrupt moderation is an increase of -the round-trip-time (RTT), due to the queuing and serving of -interrupts at dedicated moderation times. -.TP -.BI IntsPerSec= i,j,... -This parameter determines the length of any interrupt moderation interval. -Assuming that static interrupt moderation is to be used, an -.I IntsPerSec -parameter value of 2000 will lead to an interrupt moderation interval of -500 microseconds. -Possible values for this parameter are in the range of -30...40000 (interrupts per second). -The default value is 2000. -.IP -This parameter is used only if either static or dynamic interrupt moderation -is enabled on a network adapter card. -This parameter is ignored if no moderation is applied. -.IP -Note that the duration of the moderation interval is to be chosen with care. -At first glance, selecting a very long duration (e.g., only 100 interrupts per -second) seems to be meaningful, but the increase of packet-processing delay -is tremendous. -On the other hand, selecting a very short moderation time might -compensate the use of any moderation being applied. -.TP -.BI PrefPort= i,j,... -This parameter is used to force the preferred port to -A or B (on dual-port network adapters). -The preferred port is the one that is used if both ports A and B are -detected as fully functional. -Possible values are: -.I A -or -.IR B ; -.I A -is the default. -.TP -.BI RlmtMode= i,j,... -RLMT monitors the status of the port. -If the link of the active port fails, -RLMT switches immediately to the standby link. -The virtual link is maintained as long as at least one "physical" link is up. -This parameters states how RLMT should monitor both ports. -Possible values are: -.IR CheckLinkState , -.IR CheckLocalPort , -.IR CheckSeg , -or -.IR DualNet ; -.I CheckLinkState -is the default. -The different modes have the following meaning: -.IP -.I CheckLinkState -Check link state only: RLMT uses the link state reported by the adapter -hardware for each individual port to determine whether a port can be used -for all network traffic or not. -.IP -.I CheckLocalPort -In this mode, RLMT monitors the network path between the two -ports of an adapter by regularly exchanging packets between them. -This mode requires a network configuration in which the -two ports are able to "see" each other (i.e., there -must not be any router between the ports). -.IP -.I CheckSeg -Check local port and segmentation: -This mode supports the same functions as the CheckLocalPort -mode and additionally checks network segmentation between the ports. -Therefore, this mode is to be used only if Gigabit Ethernet -switches are installed on the network that have been -configured to use the Spanning Tree protocol. -.IP -.I DualNet -In this mode, ports A and B are used as separate devices. -If you have a dual port adapter, port A will be configured as -.I eth[x] -and port B as -.IR eth[x+1] . -Both ports can be used independently with distinct IP addresses. -The preferred port setting is not used. -RLMT is turned off. -.IP -Note that RLMT modes -.I CheckLocalPort -and -.I CheckLinkState -are designed to operate in configurations where a -network path between the ports on one adapter exists. -Moreover, they are not designed to work where adapters are -connected back-to-back. -.SH FILES -.TP -.I /proc/net/sk98lin/eth[x] -The statistics file of a particular interface of an adapter card. -It contains generic information about the adapter card plus a detailed -summary of all transmit and receive counters. -.TP -.I /usr/src/linux/Documentation/networking/sk98lin.txt -This is the -.I README -file of the -.I sk98lin -driver. -It contains a detailed installation HOWTO and describes all parameters -of the driver. -It denotes also common problems and provides the solution to them. -.SH BUGS -Report any bugs to linux@syskonnect.de -.\" .SH AUTHORS -.\" Ralph Roesler \[em] rroesler@syskonnect.de -.\" .br -.\" Mirko Lindner \[em] mlindner@syskonnect.de -.SH SEE ALSO -.BR ifconfig (8), -.BR insmod (8), -.BR modprobe (8) diff --git a/man4/smartpqi.4 b/man4/smartpqi.4 deleted file mode 100644 index 5e9f25c..0000000 --- a/man4/smartpqi.4 +++ /dev/null @@ -1,496 +0,0 @@ -'\" t -.\" Copyright (C) 2019-2023, Microchip Technology Inc. and its subsidiaries -.\" Copyright (C) 2016-2018, Microsemi Corporation -.\" Copyright (C) 2016, PMC-Sierra, Inc. -.\" Written by Kevin Barnett -.\" -.\" SPDX-License-Identifier: GPL-2.0-only -.TH smartpqi 4 2023-10-31 "Linux man-pages 6.7" -.SH NAME -smartpqi \- Microchip Smart Storage SCSI driver -.SH SYNOPSIS -.SY "modprobe smartpqi" -.RB [ disable_device_id_wildcards= { 0 | 1 }] -.RB [ disable_heartbeat= { 0 | 1 }] -.RB [ disable_ctrl_shutdown= { 0 | 1 }] -.RB [ lockup_action= { none | reboot | panic }] -.RB [ expose_ld_first= { 0 | 1 }] -.RB [ hide_vsep= { 0 | 1 }] -.RB [ disable_managed_interrupts= { 0 | 1 }] -.RB [ ctrl_ready_timeout= { 0 |[ 30 , 1800 ]}] -.YS -.SH DESCRIPTION -.B smartpqi -is a SCSI driver for Microchip Smart Storage controllers. -.SS Supported \f[BI]ioctl\fP\/() operations -For compatibility with applications written for the -.BR cciss (4) -and -.BR hpsa (4) -drivers, many, but not all of the -.BR ioctl (2) -operations supported by the -.B hpsa -driver are also supported by the -.B smartpqi -driver. -The data structures used by these operations -are described in the Linux kernel source file -.IR include/linux/cciss_ioctl.h . -.TP -.B CCISS_DEREGDISK -.TQ -.B CCISS_REGNEWDISK -.TQ -.B CCISS_REGNEWD -These operations -all do exactly the same thing, which is to cause the driver to re-scan -for new devices. -This does exactly the same thing as writing to the -.BR smartpqi -specific -host -.I rescan -attribute. -.TP -.B CCISS_GETPCIINFO -This operation returns the PCI domain, bus, -device, and function and "board ID" (PCI subsystem ID). -.TP -.B CCISS_GETDRIVVER -This operation returns the driver version in four bytes, encoded as: -.IP -.in +4n -.EX -(major_version << 28) | (minor_version << 24) | - (release << 16) | revision -.EE -.in -.TP -.B CCISS_PASSTHRU -Allows BMIC and CISS commands to be passed through to the controller. -.SS Boot options -.TP -.BR disable_device_id_wildcards= { 0 | 1 } -Disables support for device ID wildcards. -The default value is 0 (wildcards are enabled). -.TP -.BR disable_heartbeat= { 0 | 1 } -Disables support for the controller's heartbeat check. -This parameter is used for debugging purposes. -The default value is 0 (the controller's heartbeat check is enabled). -.TP -.BR disable_ctrl_shutdown= { 0 | 1 } -Disables support for shutting down the controller in the -event of a controller lockup. -The default value is 0 (controller will be shut down). -.TP -.BR lockup_action= { none | reboot | panic } -Specifies the action the driver takes when a controller -lockup is detected. -The default action is -.BR none . -.TS -l l ---- -l l. -parameter action -\fBnone\fP take controller offline only -\fBreboot\fP reboot the system -\fBpanic\fP panic the system -.TE -.TP -.BR expose_ld_first= { 0 | 1 } -This option exposes logical devices to the OS before physical devices. -The default value is 0 (physical devices exposed first). -.TP -.BR hide_vsep= { 0 | 1 } -This option disables exposure of the virtual SEP to the OS. -The default value is 0 (virtual SEP is exposed). -.TP -.BR disable_managed_interrupts= { 0 | 1 } -Disables driver utilization of Linux kernel managed interrupts for controllers. -The managed interrupts feature automatically distributes interrupts -to all available CPUs and assigns SMP affinity. -The default value is 0 (managed interrupts enabled). -.TP -.BR ctrl_ready_timeout= { 0 |[ 30 , 1800 ]} -This option specifies the timeout in seconds for the driver to wait -for the controller to be ready. -The valid range is 0 or -.RB [ 30 ", " 1800 ]. -The default value is 0, -which causes the driver to use a timeout of 180 seconds. -.SH FILES -.SS Device nodes -Disk drives are accessed via the SCSI disk driver -.RI ( sd ), -tape drives via the SCSI tape driver -.RI ( st ), -and the RAID controller via the SCSI generic driver -.RI ( sg ), -with device nodes named -.IR /dev/sd *, -.IR /dev/st *, -and -.IR /dev/sg *, -respectively. -.SS SmartPQI-specific host attribute files in \f[BI]/sys\fP -.TP -.IR /sys/class/scsi_host/host * /rescan -The host -.I rescan -attribute is a write-only attribute. -Writing to this attribute will cause the driver to scan for new, -changed, or removed devices (e.g., hot-plugged tape drives, or newly -configured or deleted logical volumes) and notify the SCSI mid-layer of -any changes detected. -Usually this action is triggered automatically by configuration -changes, so the user should not normally have to write to this file. -Doing so may be useful when hot-plugging devices such as tape drives or -entire storage boxes containing pre-configured logical volumes. -.TP -.IR /sys/class/scsi_host/host * /lockup_action -The host -.I lockup_action -attribute is a read/write attribute. -This attribute will cause the driver to perform a specific action in the -unlikely event that a controller lockup has been detected. -See -.B OPTIONS -above -for an explanation of the -.I lockup_action -values. -.TP -.IR /sys/class/scsi_host/host * /driver_version -The -.I driver_version -attribute is read-only. -This attribute contains the smartpqi driver version. -.IP -For example: -.IP -.in +4n -.EX -$ \c -.B cat /sys/class/scsi_host/host1/driver_version -1.1.2\-126 -.EE -.in -.TP -.IR /sys/class/scsi_host/host * /firmware_version -The -.I firmware_version -attribute is read-only. -This attribute contains the controller firmware version. -.IP -For example: -.IP -.in +4n -.EX -$ \c -.B cat /sys/class/scsi_host/host1/firmware_version -1.29\-112 -.EE -.in -.TP -.IR /sys/class/scsi_host/host * /model -The -.I model -attribute is read-only. -This attribute contains the product identification string of the controller. -.IP -For example: -.IP -.in +4n -.EX -$ \c -.B cat /sys/class/scsi_host/host1/model -1100\-16i -.EE -.in -.TP -.IR /sys/class/scsi_host/host * /serial_number -The -.I serial_number -attribute is read-only. -This attribute contains the unique identification number of the controller. -.IP -For example: -.IP -.in +4n -.EX -$ \c -.B cat /sys/class/scsi_host/host1/serial_number -6A316373777 -.EE -.in -.TP -.IR /sys/class/scsi_host/host * /vendor -The -.I vendor -attribute is read-only. -This attribute contains the vendor identification string of the controller. -.IP -For example: -.IP -.in +4n -.EX -$ \c -.B cat /sys/class/scsi_host/host1/vendor -Adaptec -.EE -.in -.TP -.IR /sys/class/scsi_host/host * /enable_stream_detection -The -.I enable_stream_detection -attribute is read-write. -This attribute enables/disables stream detection in the driver. -Enabling stream detection can improve sequential write performance -for ioaccel-enabled volumes. -See the -.B ssd_smart_path_enabled -disk attribute section for details on ioaccel-enabled volumes. -The default value is 1 (stream detection enabled). -.IP -Enable example: -.IP -.in +4n -.EX -$ \c -.B echo 1 > /sys/class/scsi_host/host1/enable_stream_detection -.EE -.in -.TP -.IR /sys/class/scsi_host/host * /enable_r5_writes -The -.I enable_r5_writes -attribute is read-write. -This attribute enables/disables RAID 5 write operations -for ioaccel-enabled volumes. -Enabling can improve sequential write performance. -See the -.B ssd_smart_path_enabled -disk attribute section for details on ioaccel-enabled volumes. -The default value is 1 (RAID 5 writes enabled). -.IP -Enable example: -.IP -.in +4n -.EX -$ \c -.B echo 1 > /sys/class/scsi_host/host1/enable_r5_writes -.EE -.in -.TP -.IR /sys/class/scsi_host/host * /enable_r6_writes -The -.I enable_r6_writes -attribute is read-write. -This attribute enables/disables RAID 6 write operations -for ioaccel-enabled volumes. -Enabling can improve sequential write performance. -See the -.B ssd_smart_path_enabled -disk attribute section for details on ioaccel-enabled volumes. -The default value is 1 (RAID 6 writes enabled). -.IP -Enable example: -.IP -.in +4n -.EX -$ \c -.B echo 1 > /sys/class/scsi_host/host1/enable_r6_writes -.EE -.in -.SS SmartPQI-specific disk attribute files in \f[BI]/sys\fP -In the file specifications below, -.I c -stands for the number of the appropriate SCSI controller, -.I b -is the bus number, -.I t -the target number, and -.I l -is the logical unit number (LUN). -.TP -.IR /sys/class/scsi_disk/ c : b : t : l /device/raid_level -The -.I raid_level -attribute is read-only. -This attribute contains the RAID level of the logical volume. -.IP -For example: -.IP -.in +4n -.EX -$ \c -.B cat /sys/class/scsi_disk/4:0:0:0/device/raid_level -RAID 0 -.EE -.in -.TP -.IR /sys/class/scsi_disk/ c : b : t : l /device/sas_address -The -.I sas_address -attribute is read-only. -This attribute contains the SAS address of the device. -.IP -For example: -.IP -.in +4n -.EX -$ \c -.B cat /sys/class/scsi_disk/1:0:3:0/device/sas_address -0x5001173d028543a2 -.EE -.in -.TP -.IR /sys/class/scsi_disk/ c : b : t : l /device/ssd_smart_path_enabled -The -.I ssd_smart_path_enabled -attribute is read-only. -This attribute is for ioaccel-enabled volumes. -(Ioaccel is an alternative driver submission path that allows the -driver to send I/O requests directly to backend SCSI devices, -bypassing the controller firmware. -This results in an increase in performance. -This method is used for HBA disks and for logical volumes comprised of SSDs.) -Contains 1 if ioaccel is enabled for the volume and 0 otherwise. -.IP -For example: -.IP -.in +4n -.EX -$ \c -.B cat /sys/class/scsi_disk/1:0:3:0/device/ssd_smart_path_enabled -0 -.EE -.in -.TP -.IR /sys/class/scsi_disk/ c : b : t : l /device/lunid -The -.I lunid -attribute is read-only. -This attribute contains the SCSI LUN ID for the device. -.IP -For example: -.IP -.in +4n -.EX -$ \c -.B cat /sys/class/scsi_disk/13:1:0:3/device/lunid -0x0300004000000000 -.EE -.in -.TP -.IR /sys/class/scsi_disk/ c : b : t : l /device/unique_id -The -.I unique_id -attribute is read-only. -This attribute contains a 16-byte ID -that uniquely identifies the device within the controller. -.IP -For example: -.IP -.in +4n -.EX -$ \c -.B cat /sys/class/scsi_disk/13:1:0:3/device/unique_id -600508B1001C6D4723A8E98D704FDB94 -.EE -.in -.TP -.IR /sys/class/scsi_disk/ c : b : t : l /device/path_info -The -.I path_info -attribute is read-only. -This attribute contains the -.IR c : b : t : l -of the device -along with the device type -and whether the device is Active or Inactive. -If the device is an HBA device, -.I path_info -will also display the PORT, BOX, and BAY the device is plugged into. -.IP -For example: -.IP -.in +4n -.EX -$ \c -.B cat /sys/class/scsi_disk/13:1:0:3/device/path_info -[13:1:0:3] Direct-Access Active -\& -$ \c -.B cat /sys/class/scsi_disk/12:0:9:0/device/path_info -[12:0:9:0] Direct-Access PORT: C1 BOX: 1 BAY: 14 Inactive -[12:0:9:0] Direct-Access PORT: C0 BOX: 1 BAY: 14 Active -.EE -.in -.TP -.IR /sys/class/scsi_disk/ c : b : t : l /device/raid_bypass_cnt -The -.I raid_bypass_cnt -attribute is read-only. -This attribute contains the number of I/O requests -that have gone through the ioaccel path -for ioaccel-enabled volumes. -See the -.B ssd_smart_path_enabled -disk attribute section for details on ioaccel-enabled volumes. -.IP -For example: -.IP -.in +4n -.EX -$ \c -.B cat /sys/class/scsi_disk/13:1:0:3/device/raid_bypass_cnt -0x300 -.EE -.in -.TP -.IR /sys/class/scsi_disk/ c : b : t : l /device/sas_ncq_prio_enable -The -.I sas_ncq_prio_enable -attribute is read/write. -This attribute enables SATA NCQ priority support. -This attribute works only when device has NCQ support -and controller firmware can handle IO with NCQ priority attribute. -.IP -For example: -.IP -.in +4n -.EX -$ \c -.B echo 1 > /sys/class/scsi_disk/13:1:0:3/device/sas_ncq_prio_enable -.EE -.in -.SH VERSIONS -The -.B smartpqi -driver was added in Linux 4.9. -.SH NOTES -.SS Configuration -To configure a Microchip Smart Storage controller, -refer to the User Guide for the controller, -which can be found by searching for the specific controller at -.UR https://www.microchip.com/design-centers/storage -.UE . -.SH HISTORY -.I /sys/class/scsi_host/host*/version -was replaced by two sysfs entries: -.IP -.I /sys/class/scsi_host/host*/driver_version -.IP -.I /sys/class/scsi_host/host*/firmware_version -.SH SEE ALSO -.BR cciss (4), -.BR hpsa (4), -.BR sd (4), -.BR st (4), -.BR sg (4) -.P -.I Documentation/ABI/testing/sysfs\-bus\-pci\-devices\-cciss -in the Linux kernel source tree. diff --git a/man4/st.4 b/man4/st.4 deleted file mode 100644 index 7366a22..0000000 --- a/man4/st.4 +++ /dev/null @@ -1,950 +0,0 @@ -.\" Copyright 1995 Robert K. Nichols (Robert.K.Nichols@att.com) -.\" Copyright 1999-2005 Kai Mäkisara (Kai.Makisara@kolumbus.fi) -.\" -.\" SPDX-License-Identifier: Linux-man-pages-copyleft -.TH st 4 2023-10-31 "Linux man-pages 6.7" -.SH NAME -st \- SCSI tape device -.SH SYNOPSIS -.nf -.B #include -.P -.BI "int ioctl(int " fd ", int " request " [, (void *)" arg3 "]);" -.BI "int ioctl(int " fd ", MTIOCTOP, (struct mtop *)" mt_cmd ); -.BI "int ioctl(int " fd ", MTIOCGET, (struct mtget *)" mt_status ); -.BI "int ioctl(int " fd ", MTIOCPOS, (struct mtpos *)" mt_pos ); -.fi -.SH DESCRIPTION -The -.B st -driver provides the interface to a variety of SCSI tape devices. -Currently, the driver takes control of all detected devices of type -\[lq]sequential-access\[rq]. -The -.B st -driver uses major device number 9. -.P -Each device uses eight minor device numbers. -The lowermost five bits -in the minor numbers are assigned sequentially in the order of -detection. -In the 2.6 kernel, the bits above the eight lowermost bits are -concatenated to the five lowermost bits to form the tape number. -The minor numbers can be grouped into -two sets of four numbers: the principal (auto-rewind) minor device numbers, -.IR n , -and the \[lq]no-rewind\[rq] device numbers, -.RI ( n " + 128)." -Devices opened using the principal device number will be sent a -.B REWIND -command when they are closed. -Devices opened using the \[lq]no-rewind\[rq] device number will not. -(Note that using an auto-rewind device for positioning the tape with, -for instance, mt does not lead to the desired result: the tape is -rewound after the mt command and the next command starts from the -beginning of the tape). -.P -Within each group, four minor numbers are available to define -devices with different characteristics (block size, compression, -density, etc.) -When the system starts up, only the first device is available. -The other three are activated when the default -characteristics are defined (see below). -(By changing compile-time -constants, it is possible to change the balance between the maximum -number of tape drives and the number of minor numbers for each -drive. -The default allocation allows control of 32 tape drives. -For instance, it is possible to control up to 64 tape drives -with two minor numbers for different options.) -.P -Devices are typically created by: -.P -.in +4n -.EX -mknod \-m 666 /dev/st0 c 9 0 -mknod \-m 666 /dev/st0l c 9 32 -mknod \-m 666 /dev/st0m c 9 64 -mknod \-m 666 /dev/st0a c 9 96 -mknod \-m 666 /dev/nst0 c 9 128 -mknod \-m 666 /dev/nst0l c 9 160 -mknod \-m 666 /dev/nst0m c 9 192 -mknod \-m 666 /dev/nst0a c 9 224 -.EE -.in -.P -There is no corresponding block device. -.P -The driver uses an internal buffer that has to be large enough to hold -at least one tape block. -Before Linux 2.1.121, the buffer is -allocated as one contiguous block. -This limits the block size to the -largest contiguous block of memory the kernel allocator can provide. -The limit is currently 128\ kB for 32-bit architectures and -256\ kB for 64-bit architectures. -In newer kernels the driver -allocates the buffer in several parts if necessary. -By default, the -maximum number of parts is 16. -This means that the maximum block size -is very large (2\ MB if allocation of 16 blocks of 128\ kB succeeds). -.P -The driver's internal buffer size is determined by a compile-time -constant which can be overridden with a kernel startup option. -In addition to this, the driver tries to allocate a larger temporary -buffer at run time if necessary. -However, run-time allocation of large -contiguous blocks of memory may fail and it is advisable not to rely -too much on dynamic buffer allocation before Linux 2.1.121 -(this applies also to demand-loading the driver with kerneld or kmod). -.P -The driver does not specifically support any tape drive brand or -model. -After system start-up the tape device options are defined by -the drive firmware. -For example, if the drive firmware selects fixed-block mode, -the tape device uses fixed-block mode. -The options can -be changed with explicit -.BR ioctl (2) -calls and remain in effect when the device is closed and reopened. -Setting the options affects both the auto-rewind and the nonrewind -device. -.P -Different options can be specified for the different devices within -the subgroup of four. -The options take effect when the device is -opened. -For example, the system administrator can define -one device that writes in fixed-block mode with a certain block size, -and one which writes in variable-block mode (if the drive supports -both modes). -.P -The driver supports -.B tape partitions -if they are supported by the drive. -(Note that the tape partitions -have nothing to do with disk partitions. -A partitioned tape can be -seen as several logical tapes within one medium.) -Partition support has to be enabled with an -.BR ioctl (2). -The tape -location is preserved within each partition across partition changes. -The partition used for subsequent tape operations is -selected with an -.BR ioctl (2). -The partition switch is executed together with -the next tape operation in order to avoid unnecessary tape -movement. -The maximum number of partitions on a tape is defined by a -compile-time constant (originally four). -The driver contains an -.BR ioctl (2) -that can format a tape with either one or two partitions. -.P -Device -.I /dev/tape -is usually created as a hard or soft link to the default tape device -on the system. -.P -Starting from Linux 2.6.2, the driver exports in the sysfs directory -.I /sys/class/scsi_tape -the attached devices and some parameters assigned to the devices. -.SS Data transfer -The driver supports operation in both fixed-block mode and -variable-block mode (if supported by the drive). -In fixed-block mode the drive -writes blocks of the specified size and the block size is not -dependent on the byte counts of the write system calls. -In variable-block mode one tape block is written for each write call -and the byte -count determines the size of the corresponding tape block. -Note that -the blocks on the tape don't contain any information about the -writing mode: when reading, the only important thing is to use -commands that accept the block sizes on the tape. -.P -In variable-block mode the read byte count does not have to match -the tape block size exactly. -If the byte count is larger than the -next block on tape, the driver returns the data and the function -returns the actual block size. -If the block size is larger than the -byte count, an error is returned. -.P -In fixed-block mode the read byte counts can be arbitrary if -buffering is enabled, or a multiple of the tape block size if -buffering is disabled. -Before Linux 2.1.121 allow writes with -arbitrary byte count if buffering is enabled. -In all other cases -(before Linux 2.1.121 with buffering disabled or newer kernel) the -write byte count must be a multiple of the tape block size. -.P -In Linux 2.6, the driver tries to use direct transfers between the user -buffer and the device. -If this is not possible, the driver's internal buffer -is used. -The reasons for not using direct transfers include improper alignment -of the user buffer (default is 512 bytes but this can be changed by the HBA -driver), one or more pages of the user buffer not reachable by the -SCSI adapter, and so on. -.P -A filemark is automatically written to tape if the last tape operation -before close was a write. -.P -When a filemark is encountered while reading, the following -happens. -If there are data remaining in the buffer when the filemark -is found, the buffered data is returned. -The next read returns zero -bytes. -The following read returns data from the next file. -The end of -recorded data is signaled by returning zero bytes for two consecutive -read calls. -The third read returns an error. -.SS Ioctls -The driver supports three -.BR ioctl (2) -requests. -Requests not recognized by the -.B st -driver are passed to the -.B SCSI -driver. -The definitions below are from -.IR /usr/include/linux/mtio.h : -.SS MTIOCTOP \[em] perform a tape operation -This request takes an argument of type -.IR "(struct mtop\ *)" . -Not all drives support all operations. -The driver returns an -.B EIO -error if the drive rejects an operation. -.P -.in +4n -.EX -/* Structure for MTIOCTOP \- mag tape op command: */ -struct mtop { - short mt_op; /* operations defined below */ - int mt_count; /* how many of them */ -}; -.EE -.in -.P -Magnetic tape operations for normal tape use: -.TP -.B MTBSF -Backward space over -.I mt_count -filemarks. -.TP -.B MTBSFM -Backward space over -.I mt_count -filemarks. -Reposition the tape to the EOT side of the last filemark. -.TP -.B MTBSR -Backward space over -.I mt_count -records (tape blocks). -.TP -.B MTBSS -Backward space over -.I mt_count -setmarks. -.TP -.B MTCOMPRESSION -Enable compression of tape data within the drive if -.I mt_count -is nonzero and disable compression if -.I mt_count -is zero. -This command uses the MODE page 15 supported by most DATs. -.TP -.B MTEOM -Go to the end of the recorded media (for appending files). -.TP -.B MTERASE -Erase tape. -With Linux 2.6, short erase (mark tape empty) is performed if the -argument is zero. -Otherwise, long erase (erase all) is done. -.TP -.B MTFSF -Forward space over -.I mt_count -filemarks. -.TP -.B MTFSFM -Forward space over -.I mt_count -filemarks. -Reposition the tape to the BOT side of the last filemark. -.TP -.B MTFSR -Forward space over -.I mt_count -records (tape blocks). -.TP -.B MTFSS -Forward space over -.I mt_count -setmarks. -.TP -.B MTLOAD -Execute the SCSI load command. -A special case is available for some HP -autoloaders. -If -.I mt_count -is the constant -.B MT_ST_HPLOADER_OFFSET -plus a number, the number is -sent to the drive to control the autoloader. -.TP -.B MTLOCK -Lock the tape drive door. -.TP -.B MTMKPART -Format the tape into one or two partitions. -If -.I mt_count -is positive, it gives the size of partition 1 and partition -0 contains the rest of the tape. -If -.I mt_count -is zero, the tape is formatted into one partition. -From Linux 4.6, -.\" commit 8038e6456a3e6f5c4759e0d73c4f9165b90c93e7 -a negative -.I mt_count -specifies the size of partition 0 and -the rest of the tape contains partition 1. -The physical ordering of partitions depends on the drive. -This command is not allowed for a drive unless the partition support -is enabled for the drive (see -.B MT_ST_CAN_PARTITIONS -below). -.TP -.B MTNOP -No op\[em]flushes the driver's buffer as a side effect. -Should be used before reading status with -.BR MTIOCGET . -.TP -.B MTOFFL -Rewind and put the drive off line. -.TP -.B MTRESET -Reset drive. -.TP -.B MTRETEN -Re-tension tape. -.TP -.B MTREW -Rewind. -.TP -.B MTSEEK -Seek to the tape block number specified in -.IR mt_count . -This operation requires either a SCSI-2 drive that supports the -.B LOCATE -command (device-specific address) -or a Tandberg-compatible SCSI-1 drive (Tandberg, Archive -Viper, Wangtek, ...). -The block number should be one that was previously returned by -.B MTIOCPOS -if device-specific addresses are used. -.TP -.B MTSETBLK -Set the drive's block length to the value specified in -.IR mt_count . -A block length of zero sets the drive to variable block size mode. -.TP -.B MTSETDENSITY -Set the tape density to the code in -.IR mt_count . -The density codes supported by a drive can be found from the drive -documentation. -.TP -.B MTSETPART -The active partition is switched to -.IR mt_count . -The partitions are numbered from zero. -This command is not allowed for -a drive unless the partition support is enabled for the drive (see -.B MT_ST_CAN_PARTITIONS -below). -.TP -.B MTUNLOAD -Execute the SCSI unload command (does not eject the tape). -.TP -.B MTUNLOCK -Unlock the tape drive door. -.TP -.B MTWEOF -Write -.I mt_count -filemarks. -.TP -.B MTWSM -Write -.I mt_count -setmarks. -.P -Magnetic tape operations for setting of device options (by the superuser): -.TP -.B MTSETDRVBUFFER -Set various drive and driver options according to bits encoded in -.IR mt_count . -These consist of the drive's buffering mode, a set of Boolean driver -options, the buffer write threshold, defaults for the block size and -density, and timeouts (only since Linux 2.1). -A single operation can affect only one item in the list below (the -Booleans counted as one item.) -.IP -A value having zeros in the high-order 4 bits will be used to set the -drive's buffering mode. -The buffering modes are: -.RS -.TP -.B 0 -The drive will not report -.B GOOD -status on write commands until the data -blocks are actually written to the medium. -.TP -.B 1 -The drive may report -.B GOOD -status on write commands as soon as all the -data has been transferred to the drive's internal buffer. -.TP -.B 2 -The drive may report -.B GOOD -status on write commands as soon as (a) all -the data has been transferred to the drive's internal buffer, and -(b) all buffered data from different initiators has been successfully -written to the medium. -.RE -.IP -To control the write threshold the value in -.I mt_count -must include the constant -.B MT_ST_WRITE_THRESHOLD -bitwise ORed with a block count in the low 28 bits. -The block count refers to 1024-byte blocks, not the physical block -size on the tape. -The threshold cannot exceed the driver's internal buffer size (see -DESCRIPTION, above). -.IP -To set and clear the Boolean options -the value in -.I mt_count -must include one of the constants -.BR MT_ST_BOOLEANS , -.BR MT_ST_SETBOOLEANS , -.BR MT_ST_CLEARBOOLEANS , -or -.B MT_ST_DEFBOOLEANS -bitwise ORed with -whatever combination of the following options is desired. -Using -.B MT_ST_BOOLEANS -the options can be set to the values -defined in the corresponding bits. -With -.B MT_ST_SETBOOLEANS -the options can be selectively set and with -.B MT_ST_DEFBOOLEANS -selectively cleared. -.IP -The default options for a tape device are set with -.BR MT_ST_DEFBOOLEANS . -A nonactive tape device (e.g., device with -minor 32 or 160) is activated when the default options for it are -defined the first time. -An activated device inherits from the device -activated at start-up the options not set explicitly. -.IP -The Boolean options are: -.RS -.TP -.BR MT_ST_BUFFER_WRITES " (Default: true)" -Buffer all write operations in fixed-block mode. -If this option is false and the drive uses a fixed block size, then -all write operations must be for a multiple of the block size. -This option must be set false to write reliable multivolume archives. -.TP -.BR MT_ST_ASYNC_WRITES " (Default: true)" -When this option is true, write operations return immediately without -waiting for the data to be transferred to the drive if the data fits -into the driver's buffer. -The write threshold determines how full the buffer must be before a -new SCSI write command is issued. -Any errors reported by the drive will be held until the next -operation. -This option must be set false to write reliable multivolume archives. -.TP -.BR MT_ST_READ_AHEAD " (Default: true)" -This option causes the driver to provide read buffering and -read-ahead in fixed-block mode. -If this option is false and the drive uses a fixed block size, then -all read operations must be for a multiple of the block size. -.TP -.BR MT_ST_TWO_FM " (Default: false)" -This option modifies the driver behavior when a file is closed. -The normal action is to write a single filemark. -If the option is true, the driver will write two filemarks and -backspace over the second one. -.IP -Note: -This option should not be set true for QIC tape drives since they are -unable to overwrite a filemark. -These drives detect the end of recorded data by testing for blank tape -rather than two consecutive filemarks. -Most other current drives also -detect the end of recorded data and using two filemarks is usually -necessary only when interchanging tapes with some other systems. -.TP -.BR MT_ST_DEBUGGING " (Default: false)" -This option turns on various debugging messages from the driver -(effective only if the driver was compiled with -.B DEBUG -defined nonzero). -.TP -.BR MT_ST_FAST_EOM " (Default: false)" -This option causes the -.B MTEOM -operation to be sent directly to the -drive, potentially speeding up the operation but causing the driver to -lose track of the current file number normally returned by the -.B MTIOCGET -request. -If -.B MT_ST_FAST_EOM -is false, the driver will respond to an -.B MTEOM -request by forward spacing over files. -.TP -.BR MT_ST_AUTO_LOCK " (Default: false)" -When this option is true, the drive door is locked when the device file is -opened and unlocked when it is closed. -.TP -.BR MT_ST_DEF_WRITES " (Default: false)" -The tape options (block size, mode, compression, etc.) may change -when changing from one device linked to a drive to another device -linked to the same drive depending on how the devices are -defined. -This option defines when the changes are enforced by the -driver using SCSI-commands and when the drives auto-detection -capabilities are relied upon. -If this option is false, the driver -sends the SCSI-commands immediately when the device is changed. -If the -option is true, the SCSI-commands are not sent until a write is -requested. -In this case, the drive firmware is allowed to detect the -tape structure when reading and the SCSI-commands are used only to -make sure that a tape is written according to the correct specification. -.TP -.BR MT_ST_CAN_BSR " (Default: false)" -When read-ahead is used, the tape must sometimes be spaced backward to the -correct position when the device is closed and the SCSI command to -space backward over records is used for this purpose. -Some older -drives can't process this command reliably and this option can be used -to instruct the driver not to use the command. -The end result is that, -with read-ahead and fixed-block mode, the tape may not be correctly -positioned within a file when the device is closed. -With Linux 2.6, the -default is true for drives supporting SCSI-3. -.TP -.BR MT_ST_NO_BLKLIMS " (Default: false)" -Some drives don't accept the -.B "READ BLOCK LIMITS" -SCSI command. -If this is used, the driver does not use the command. -The drawback is -that the driver can't check before sending commands if the selected -block size is acceptable to the drive. -.TP -.BR MT_ST_CAN_PARTITIONS " (Default: false)" -This option enables support for several partitions within a -tape. -The option applies to all devices linked to a drive. -.TP -.BR MT_ST_SCSI2LOGICAL " (Default: false)" -This option instructs the driver to use the logical block addresses -defined in the SCSI-2 standard when performing the seek and tell -operations (both with -.B MTSEEK -and -.B MTIOCPOS -commands and when changing tape -partition). -Otherwise, the device-specific addresses are used. -It is highly advisable to set this option if the drive supports the -logical addresses because they count also filemarks. -There are some -drives that support only the logical block addresses. -.TP -.BR MT_ST_SYSV " (Default: false)" -When this option is enabled, the tape devices use the System V -semantics. -Otherwise, the BSD semantics are used. -The most important -difference between the semantics is what happens when a device used -for reading is closed: in System V semantics the tape is spaced forward -past the next filemark if this has not happened while using the -device. -In BSD semantics the tape position is not changed. -.TP -.BR MT_NO_WAIT " (Default: false)" -Enables immediate mode (i.e., don't wait for the command to finish) for some -commands (e.g., rewind). -.P -An example: -.P -.in +4n -.EX -struct mtop mt_cmd; -mt_cmd.mt_op = MTSETDRVBUFFER; -mt_cmd.mt_count = MT_ST_BOOLEANS | - MT_ST_BUFFER_WRITES | MT_ST_ASYNC_WRITES; -ioctl(fd, MTIOCTOP, mt_cmd); -.EE -.in -.P -The default block size for a device can be set with -.B MT_ST_DEF_BLKSIZE -and the default density code can be set with -.BR MT_ST_DEFDENSITY . -The values for the parameters are or'ed -with the operation code. -.P -With Linux 2.1.x and later, the timeout values can be set with the -subcommand -.B MT_ST_SET_TIMEOUT -ORed with the timeout in seconds. -The long timeout (used for rewinds and other commands -that may take a long time) can be set with -.BR MT_ST_SET_LONG_TIMEOUT . -The kernel defaults are very long to -make sure that a successful command is not timed out with any -drive. -Because of this, the driver may seem stuck even if it is only -waiting for the timeout. -These commands can be used to set more -practical values for a specific drive. -The timeouts set for one device -apply for all devices linked to the same drive. -.P -Starting from Linux 2.4.19 and Linux 2.5.43, the driver supports a status -bit which indicates whether the drive requests cleaning. -The method used by the -drive to return cleaning information is set using the -.B MT_ST_SEL_CLN -subcommand. -If the value is zero, the cleaning -bit is always zero. -If the value is one, the TapeAlert data defined -in the SCSI-3 standard is used (not yet implemented). -Values 2\[en]17 are -reserved. -If the lowest eight bits are >= 18, bits from the extended -sense data are used. -The bits 9\[en]16 specify a mask to select the bits -to look at and the bits 17\[en]23 specify the bit pattern to look for. -If the bit pattern is zero, one or more bits under the mask indicate -the cleaning request. -If the pattern is nonzero, the pattern must match -the masked sense data byte. -.RE -.SS MTIOCGET \[em] get status -This request takes an argument of type -.IR "(struct mtget\ *)" . -.P -.in +4n -.EX -/* structure for MTIOCGET \- mag tape get status command */ -struct mtget { - long mt_type; - long mt_resid; - /* the following registers are device dependent */ - long mt_dsreg; - long mt_gstat; - long mt_erreg; - /* The next two fields are not always used */ - daddr_t mt_fileno; - daddr_t mt_blkno; -}; -.EE -.in -.TP -\fImt_type\fP -The header file defines many values for -.IR mt_type , -but the current driver reports only the generic types -.B MT_ISSCSI1 -(Generic SCSI-1 tape) -and -.B MT_ISSCSI2 -(Generic SCSI-2 tape). -.TP -\fImt_resid\fP -contains the current tape partition number. -.TP -\fImt_dsreg\fP -reports the drive's current settings for block size (in the low 24 -bits) and density (in the high 8 bits). -These fields are defined by -.BR MT_ST_BLKSIZE_SHIFT , -.BR MT_ST_BLKSIZE_MASK , -.BR MT_ST_DENSITY_SHIFT , -and -.BR MT_ST_DENSITY_MASK . -.TP -\fImt_gstat\fP -reports generic (device independent) status information. -The header file defines macros for testing these status bits: -.RS -.TP -\fBGMT_EOF\fP(\fIx\fP) -The tape is positioned just after a filemark -(always false after an -.B MTSEEK -operation). -.TP -\fBGMT_BOT\fP(\fIx\fP) -The tape is positioned at the beginning of the first file (always false -after an -.B MTSEEK -operation). -.TP -\fBGMT_EOT\fP(\fIx\fP) -A tape operation has reached the physical End Of Tape. -.TP -\fBGMT_SM\fP(\fIx\fP) -The tape is currently positioned at a setmark -(always false after an -.B MTSEEK -operation). -.TP -\fBGMT_EOD\fP(\fIx\fP) -The tape is positioned at the end of recorded data. -.TP -\fBGMT_WR_PROT\fP(\fIx\fP) -The drive is write-protected. -For some drives this can also mean that the drive does not support -writing on the current medium type. -.TP -\fBGMT_ONLINE\fP(\fIx\fP) -The last -.BR open (2) -found the drive with a tape in place and ready for operation. -.TP -\fBGMT_D_6250\fP(\fIx\fP) -.TQ -\fBGMT_D_1600\fP(\fIx\fP) -.TQ -\fBGMT_D_800\fP(\fIx\fP) -This \[lq]generic\[rq] status information reports the current -density setting for 9-track \(12" tape drives only. -.TP -\fBGMT_DR_OPEN\fP(\fIx\fP) -The drive does not have a tape in place. -.TP -\fBGMT_IM_REP_EN\fP(\fIx\fP) -Immediate report mode. -This bit is set if there are no guarantees that -the data has been physically written to the tape when the write call -returns. -It is set zero only when the driver does not buffer data and -the drive is set not to buffer data. -.TP -\fBGMT_CLN\fP(\fIx\fP) -The drive has requested cleaning. -Implemented since Linux 2.4.19 and Linux 2.5.43. -.RE -.TP -\fImt_erreg\fP -The only field defined in -.I mt_erreg -is the recovered error count in the low 16 bits (as defined by -.B MT_ST_SOFTERR_SHIFT -and -.BR MT_ST_SOFTERR_MASK ). -Due to inconsistencies in the way drives report recovered errors, this -count is often not maintained (most drives do not by default report -soft errors but this can be changed with a SCSI MODE SELECT command). -.TP -\fImt_fileno\fP -reports the current file number (zero-based). -This value is set to \-1 when the file number is unknown (e.g., after -.B MTBSS -or -.BR MTSEEK ). -.TP -\fImt_blkno\fP -reports the block number (zero-based) within the current file. -This value is set to \-1 when the block number is unknown (e.g., after -.BR MTBSF , -.BR MTBSS , -or -.BR MTSEEK ). -.SS MTIOCPOS \[em] get tape position -This request takes an argument of type -.I "(struct mtpos\ *)" -and reports the drive's notion of the current tape block number, -which is not the same as -.I mt_blkno -returned by -.BR MTIOCGET . -This drive must be a SCSI-2 drive that supports the -.B "READ POSITION" -command (device-specific address) -or a Tandberg-compatible SCSI-1 drive (Tandberg, Archive -Viper, Wangtek, ... ). -.P -.in +4n -.EX -/* structure for MTIOCPOS \- mag tape get position command */ -struct mtpos { - long mt_blkno; /* current block number */ -}; -.EE -.in -.SH RETURN VALUE -.TP -.B EACCES -An attempt was made to write or erase a write-protected tape. -(This error is not detected during -.BR open (2).) -.TP -.B EBUSY -The device is already in use or the driver was unable to allocate a -buffer. -.TP -.B EFAULT -The command parameters point to memory not belonging to the calling -process. -.TP -.B EINVAL -An -.BR ioctl (2) -had an invalid argument, or a requested block size was invalid. -.TP -.B EIO -The requested operation could not be completed. -.TP -.B ENOMEM -The byte count in -.BR read (2) -is smaller than the next physical block on the tape. -(Before Linux 2.2.18 and Linux 2.4.0 the extra bytes have been -.\" Precisely: Linux 2.6.0-test6 -silently ignored.) -.TP -.B ENOSPC -A write operation could not be completed because the tape reached -end-of-medium. -.TP -.B ENOSYS -Unknown -.BR ioctl (2). -.TP -.B ENXIO -During opening, the tape device does not exist. -.TP -.B EOVERFLOW -An attempt was made to read or write a variable-length block that is -larger than the driver's internal buffer. -.TP -.B EROFS -Open is attempted with -.B O_WRONLY -or -.B O_RDWR -when the tape in the drive is write-protected. -.SH FILES -.TP -.I /dev/st* -the auto-rewind SCSI tape devices -.TP -.I /dev/nst* -the nonrewind SCSI tape devices -.\" .SH AUTHOR -.\" The driver has been written by Kai M\(:akisara (Kai.Makisara@metla.fi) -.\" starting from a driver written by Dwayne Forsyth. -.\" Several other -.\" people have also contributed to the driver. -.SH NOTES -.IP \[bu] 3 -When exchanging data between systems, both systems have to agree on -the physical tape block size. -The parameters of a drive after startup -are often not the ones most operating systems use with these -devices. -Most systems use drives in variable-block mode if the drive -supports that mode. -This applies to most modern drives, including -DATs, 8mm helical scan drives, DLTs, etc. -It may be advisable to use -these drives in variable-block mode also in Linux (i.e., use -.B MTSETBLK -or -.B MTSETDEFBLK -at system startup to set the mode), at least when -exchanging data with a foreign system. -The drawback of -this is that a fairly large tape block size has to be used to get -acceptable data transfer rates on the SCSI bus. -.IP \[bu] -Many programs (e.g., -.BR tar (1)) -allow the user to specify the blocking -factor on the command line. -Note that this determines the physical block -size on tape only in variable-block mode. -.IP \[bu] -In order to use SCSI tape drives, the basic SCSI driver, -a SCSI-adapter driver and the SCSI tape driver must be either -configured into the kernel or loaded as modules. -If the SCSI-tape -driver is not present, the drive is recognized but the tape support -described in this page is not available. -.IP \[bu] -The driver writes error messages to the console/log. -The SENSE -codes written into some messages are automatically translated to text -if verbose SCSI messages are enabled in kernel configuration. -.IP \[bu] -The driver's internal buffering allows good throughput in fixed-block -mode also with small -.BR read (2) -and -.BR write (2) -byte counts. -With direct transfers -this is not possible and may cause a surprise when moving to the 2.6 -kernel. -The solution is to tell the software to use larger transfers (often -telling it to use larger blocks). -If this is not possible, direct transfers can be disabled. -.SH SEE ALSO -.BR mt (1) -.P -The file -.I drivers/scsi/README.st -or -.I Documentation/scsi/st.txt -(kernel >= 2.6) in the Linux kernel source tree contains -the most recent information about the driver and its configuration -possibilities diff --git a/man4/tty.4 b/man4/tty.4 deleted file mode 100644 index 72bfcdf..0000000 --- a/man4/tty.4 +++ /dev/null @@ -1,67 +0,0 @@ -.\" Copyright (c) 1993 Michael Haardt (michael@moria.de), -.\" Fri Apr 2 11:32:09 MET DST 1993 -.\" -.\" SPDX-License-Identifier: GPL-2.0-or-later -.\" -.\" Modified 1993-07-24 by Rik Faith (faith@cs.unc.edu) -.\" Modified 2003-04-07 by Michael Kerrisk -.\" -.TH tty 4 2023-10-31 "Linux man-pages 6.7" -.SH NAME -tty \- controlling terminal -.SH DESCRIPTION -The file -.I /dev/tty -is a character file with major number 5 and -minor number 0, usually with mode 0666 and ownership root:tty. -It is a synonym for the controlling terminal of a process, if any. -.P -In addition to the -.BR ioctl (2) -requests supported by the device that -.B tty -refers to, the -.BR ioctl (2) -request -.B TIOCNOTTY -is supported. -.SS TIOCNOTTY -Detach the calling process from its controlling terminal. -.P -If the process is the session leader, -then -.B SIGHUP -and -.B SIGCONT -signals are sent to the foreground process group -and all processes in the current session lose their controlling tty. -.P -This -.BR ioctl (2) -call works only on file descriptors connected -to -.IR /dev/tty . -It is used by daemon processes when they are invoked -by a user at a terminal. -The process attempts to open -.IR /dev/tty . -If the open succeeds, it -detaches itself from the terminal by using -.BR TIOCNOTTY , -while if the -open fails, it is obviously not attached to a terminal and does not need -to detach itself. -.SH FILES -.I /dev/tty -.SH SEE ALSO -.BR chown (1), -.BR mknod (1), -.BR ioctl (2), -.BR ioctl_console (2), -.BR ioctl_tty (2), -.BR termios (3), -.BR ttyS (4), -.BR vcs (4), -.BR pty (7), -.BR agetty (8), -.BR mingetty (8) diff --git a/man4/ttyS.4 b/man4/ttyS.4 deleted file mode 100644 index 66fb119..0000000 --- a/man4/ttyS.4 +++ /dev/null @@ -1,33 +0,0 @@ -.\" Copyright (c) 1993 Michael Haardt (michael@moria.de), -.\" Fri Apr 2 11:32:09 MET DST 1993 -.\" -.\" SPDX-License-Identifier: GPL-2.0-or-later -.\" -.\" Modified Sat Jul 24 17:03:24 1993 by Rik Faith (faith@cs.unc.edu) -.TH ttyS 4 2023-10-31 "Linux man-pages 6.7" -.SH NAME -ttyS \- serial terminal lines -.SH DESCRIPTION -.B ttyS[0\-3] -are character devices for the serial terminal lines. -.P -They are typically created by: -.P -.in +4n -.EX -mknod \-m 660 /dev/ttyS0 c 4 64 # base address 0x3f8 -mknod \-m 660 /dev/ttyS1 c 4 65 # base address 0x2f8 -mknod \-m 660 /dev/ttyS2 c 4 66 # base address 0x3e8 -mknod \-m 660 /dev/ttyS3 c 4 67 # base address 0x2e8 -chown root:tty /dev/ttyS[0\-3] -.EE -.in -.SH FILES -.I /dev/ttyS[0\-3] -.SH SEE ALSO -.BR chown (1), -.BR mknod (1), -.BR tty (4), -.BR agetty (8), -.BR mingetty (8), -.BR setserial (8) diff --git a/man4/tty_ioctl.4 b/man4/tty_ioctl.4 deleted file mode 100644 index fc4736e..0000000 --- a/man4/tty_ioctl.4 +++ /dev/null @@ -1,2 +0,0 @@ -.so man2/ioctl_tty.2 -.\" Link for old name of this page diff --git a/man4/urandom.4 b/man4/urandom.4 deleted file mode 100644 index b95979f..0000000 --- a/man4/urandom.4 +++ /dev/null @@ -1 +0,0 @@ -.so man4/random.4 diff --git a/man4/vcs.4 b/man4/vcs.4 deleted file mode 100644 index bf5dba2..0000000 --- a/man4/vcs.4 +++ /dev/null @@ -1,172 +0,0 @@ -.\" Copyright (c) 1995 James R. Van Zandt -.\" Sat Feb 18 09:11:07 EST 1995 -.\" -.\" SPDX-License-Identifier: GPL-2.0-or-later -.\" -.\" Modified, Sun Feb 26 15:08:05 1995, faith@cs.unc.edu -.\" 2007-12-17, Samuel Thibault : -.\" document the VT_GETHIFONTMASK ioctl -.\" " -.TH vcs 4 2023-10-31 "Linux man-pages 6.7" -.SH NAME -vcs, vcsa \- virtual console memory -.SH DESCRIPTION -.I /dev/vcs0 -is a character device with major number 7 and minor number -0, usually with mode 0644 and ownership root:tty. -It refers to the memory of the currently -displayed virtual console terminal. -.P -.I /dev/vcs[1\-63] -are character devices for virtual console -terminals, they have major number 7 and minor number 1 to 63, usually -mode 0644 and ownership root:tty. -.I /dev/vcsa[0\-63] -are the same, but -using -.IR "unsigned short" s -(in host byte order) that include attributes, -and prefixed with four bytes giving the screen -dimensions and cursor position: -.IR lines , -.IR columns , -.IR x , -.IR y . -.RI ( x -= -.I y -= 0 at the top left corner of the screen.) -.P -When a 512-character font is loaded, -the 9th bit position can be fetched by applying the -.BR ioctl (2) -.B VT_GETHIFONTMASK -operation -(available since Linux 2.6.18) -on -.IR /dev/tty[1\-63] ; -the value is returned in the -.I "unsigned short" -pointed to by the third -.BR ioctl (2) -argument. -.P -These devices replace the screendump -.BR ioctl (2) -operations of -.BR ioctl_console (2), -so the system -administrator can control access using filesystem permissions. -.P -The devices for the first eight virtual consoles may be created by: -.P -.in +4n -.EX -for x in 0 1 2 3 4 5 6 7 8; do - mknod \-m 644 /dev/vcs$x c 7 $x; - mknod \-m 644 /dev/vcsa$x c 7 $[$x+128]; -done -chown root:tty /dev/vcs* -.EE -.in -.P -No -.BR ioctl (2) -requests are supported. -.SH FILES -.I /dev/vcs[0\-63] -.br -.I /dev/vcsa[0\-63] -.\" .SH AUTHOR -.\" Andries Brouwer -.SH VERSIONS -Introduced with Linux 1.1.92. -.SH EXAMPLES -You may do a screendump on vt3 by switching to vt1 and typing -.P -.in +4n -.EX -cat /dev/vcs3 >foo -.EE -.in -.P -Note that the output does not contain -newline characters, so some processing may be required, like -in -.P -.in +4n -.EX -fold \-w 81 /dev/vcs3 | lpr -.EE -.in -.P -or (horrors) -.P -.in +4n -.EX -setterm \-dump 3 \-file /proc/self/fd/1 -.EE -.in -.P -The -.I /dev/vcsa0 -device is used for Braille support. -.P -This program displays the character and screen attributes under the -cursor of the second virtual console, then changes the background color -there: -.P -.EX -#include -#include -#include -#include -#include -#include -\& -int -main(void) -{ - int fd; - char *device = "/dev/vcsa2"; - char *console = "/dev/tty2"; - struct {unsigned char lines, cols, x, y;} scrn; - unsigned short s; - unsigned short mask; - unsigned char attrib; - int ch; -\& - fd = open(console, O_RDWR); - if (fd < 0) { - perror(console); - exit(EXIT_FAILURE); - } - if (ioctl(fd, VT_GETHIFONTMASK, &mask) < 0) { - perror("VT_GETHIFONTMASK"); - exit(EXIT_FAILURE); - } - (void) close(fd); - fd = open(device, O_RDWR); - if (fd < 0) { - perror(device); - exit(EXIT_FAILURE); - } - (void) read(fd, &scrn, 4); - (void) lseek(fd, 4 + 2*(scrn.y*scrn.cols + scrn.x), SEEK_SET); - (void) read(fd, &s, 2); - ch = s & 0xff; - if (s & mask) - ch |= 0x100; - attrib = ((s & \[ti]mask) >> 8); - printf("ch=%#03x attrib=%#02x\en", ch, attrib); - s \[ha]= 0x1000; - (void) lseek(fd, \-2, SEEK_CUR); - (void) write(fd, &s, 2); - exit(EXIT_SUCCESS); -} -.EE -.SH SEE ALSO -.BR ioctl_console (2), -.BR tty (4), -.BR ttyS (4), -.BR gpm (8) diff --git a/man4/vcsa.4 b/man4/vcsa.4 deleted file mode 100644 index ffe8d9b..0000000 --- a/man4/vcsa.4 +++ /dev/null @@ -1 +0,0 @@ -.so man4/vcs.4 diff --git a/man4/veth.4 b/man4/veth.4 deleted file mode 100644 index d6c9a19..0000000 --- a/man4/veth.4 +++ /dev/null @@ -1,86 +0,0 @@ -.\" Copyright (c) 2012 Tomáš Pospíšek (tpo_deb@sourcepole.ch), -.\" Fri, 03 Nov 2012 22:35:33 +0100 -.\" and Copyright (c) 2012 Eric W. Biederman -.\" -.\" SPDX-License-Identifier: GPL-2.0-or-later -.\" -.\" -.TH veth 4 2023-10-31 "Linux man-pages 6.7" -.SH NAME -veth \- Virtual Ethernet Device -.SH DESCRIPTION -The -.B veth -devices are virtual Ethernet devices. -They can act as tunnels between network namespaces to create -a bridge to a physical network device in another namespace, -but can also be used as standalone network devices. -.P -.B veth -devices are always created in interconnected pairs. -A pair can be created using the command: -.P -.in +4n -.EX -# ip link add type veth peer name -.EE -.in -.P -In the above, -.I p1-name -and -.I p2-name -are the names assigned to the two connected end points. -.P -Packets transmitted on one device in the pair are immediately received on -the other device. -When either device is down, the link state of the pair is down. -.P -.B veth -device pairs are useful for combining the network -facilities of the kernel together in interesting ways. -A particularly interesting use case is to place one end of a -.B veth -pair in one network namespace and the other end in another network namespace, -thus allowing communication between network namespaces. -To do this, one can provide the -.B netns -parameter when creating the interfaces: -.P -.in +4n -.EX -# ip link add netns type veth peer netns -.EE -.in -.P -or, for an existing -.B veth -pair, move one side to the other namespace: -.P -.in +4n -.EX -# ip link set netns -.EE -.in -.P -.BR ethtool (8) -can be used to find the peer of a -.B veth -network interface, using commands something like: -.P -.in +4n -.EX -# \fBip link add ve_A type veth peer name ve_B\fP # Create veth pair -# \fBethtool \-S ve_A\fP # Discover interface index of peer -NIC statistics: - peer_ifindex: 16 -# \fBip link | grep \[aq]\[ha]16:\[aq]\fP # Look up interface -16: ve_B@ve_A: mtu 1500 qdisc ... -.EE -.in -.SH "SEE ALSO" -.BR clone (2), -.BR network_namespaces (7), -.BR ip (8), -.BR ip\-link (8), -.BR ip\-netns (8) diff --git a/man4/wavelan.4 b/man4/wavelan.4 deleted file mode 100644 index 3e2f3b4..0000000 --- a/man4/wavelan.4 +++ /dev/null @@ -1,142 +0,0 @@ -.\" From jt@hplb.hpl.hp.com Thu Dec 19 18:31:49 1996 -.\" From: Jean Tourrilhes -.\" Address: HP Labs, Filton Road, Stoke Gifford, Bristol BS12 6QZ, U.K. -.\" Jean II - HPLB - '96 -.\" wavelan.c.4 -.\" -.\" Provenance of this page is unclear. -.\" -.\" SPDX-License-Identifier: GPL-1.0-or-later -.\" -.TH wavelan 4 2023-10-31 "Linux man-pages 6.7" -.SH NAME -wavelan \- AT&T GIS WaveLAN ISA device driver -.SH SYNOPSIS -.nf -.BI "insmod wavelan_cs.o [io=" B,B.. "] [ irq=" I,I.. "] [name=" N,N.. ] -.fi -.SH DESCRIPTION -.I This driver is obsolete: -it was removed in Linux 2.6.35. -.P -.B wavelan -is the low-level device driver for the NCR / AT&T / Lucent -.B WaveLAN ISA -and Digital (DEC) -.B RoamAbout DS -wireless ethernet adapter. -This driver is available as a module or -might be compiled in the kernel. -This driver supports multiple cards -in both forms (up to 4) and allocates the next available ethernet -device (eth0..eth#) for each card found, unless a device name is -explicitly specified (see below). -This device name will be reported -in the kernel log file with the MAC address, NWID, and frequency used -by the card. -.SS Parameters -This section applies to the module form (parameters passed on the -.BR insmod (8) -command line). -If the driver is included in the kernel, use the -.I ether=IRQ,IO,NAME -syntax on the kernel command line. -.TP -.B io -Specify the list of base addresses where to search for wavelan cards -(setting by dip switch on the card). -If you don't specify any io -address, the driver will scan 0x390 and 0x3E0 addresses, which might -conflict with other hardware... -.TP -.B irq -Set the list of IRQs that each wavelan card should use (the value is -saved in permanent storage for future use). -.TP -.B name -Set the list of names to be used for each wavelan card device (name -used by -.BR ifconfig (8)). -.SS Wireless extensions -Use -.BR iwconfig (8) -to manipulate wireless extensions. -.SS NWID (or domain) -Set the network ID -.RI [ 0 -to -.IR FFFF ] -or disable it -.RI [ off ]. -As the NWID is stored in the card Permanent Storage Area, it will be -reused at any further invocation of the driver. -.SS Frequency & channels -For the 2.4\ GHz 2.00 Hardware, you are able to set the frequency by -specifying one of the 10 defined channels -.RI ( 2.412, -.I 2.422, 2.425, 2.4305, 2.432, 2.442, 2.452, 2.460, 2.462 -or -.IR 2.484 ) -or directly as a numeric value. -The frequency is changed immediately and -permanently. -Frequency availability depends on the regulations... -.SS Statistics spy -Set a list of MAC addresses in the driver (up to 8) and get the last -quality of link for each of those (see -.BR iwspy (8)). -.SS /proc/net/wireless -.I status -is the status reported by the modem. -.I Link quality -reports the quality of the modulation on the air (direct sequence -spread spectrum) [max = 16]. -.I Level -and -.I Noise -refer to the signal level and noise level [max = 64]. -The -.I crypt discarded packet -and -.I misc discarded packet -counters are not implemented. -.SS Private ioctl -You may use -.BR iwpriv (8) -to manipulate private ioctls. -.SS Quality and level threshold -Enables you to define the quality and level threshold used by the -modem (packet below that level are discarded). -.SS Histogram -This functionality makes it possible to set a number of -signal level intervals and -to count the number of packets received in each of those defined -intervals. -This distribution might be used to calculate the mean value -and standard deviation of the signal level. -.SS Specific notes -This driver fails to detect some -.B non-NCR/AT&T/Lucent -Wavelan cards. -If this happens for you, you must look in the source code on -how to add your card to the detection routine. -.P -Some of the mentioned features are optional. -You may enable or disable -them by changing flags in the driver header and recompile. -.\" .SH AUTHOR -.\" Bruce Janson \[em] bruce@cs.usyd.edu.au -.\" .br -.\" Jean Tourrilhes \[em] jt@hplb.hpl.hp.com -.\" .br -.\" (and others; see source code for details) -.\" -.\" SEE ALSO part -.\" -.SH SEE ALSO -.BR wavelan_cs (4), -.BR ifconfig (8), -.BR insmod (8), -.BR iwconfig (8), -.BR iwpriv (8), -.BR iwspy (8) diff --git a/man4/zero.4 b/man4/zero.4 deleted file mode 100644 index 15a39be..0000000 --- a/man4/zero.4 +++ /dev/null @@ -1 +0,0 @@ -.so man4/null.4 -- cgit v1.2.3