path: root/man/man7/attributes.7

.\" Copyright (c) 2014, Red Hat, Inc
.\"     Written by Alexandre Oliva <aoliva@redhat.com>
.\"
.\" SPDX-License-Identifier: GPL-2.0-or-later
.TH attributes 7 2024-05-02 "Linux man-pages (unreleased)"
.SH NAME
attributes \- POSIX safety concepts
.SH DESCRIPTION
.\"
.\"
.IR Note :
the text of this man page is based on the material taken from
the "POSIX Safety Concepts" section of the GNU C Library manual.
Further details on the topics described here can be found in that
manual.
.P
Various function manual pages include a section ATTRIBUTES
that describes the safety of calling the function in various contexts.
This section annotates functions with the following safety markings:
.TP
.I MT-Safe
.I MT-Safe
or
Thread-Safe functions are safe to call in the presence
of other threads.
MT, in MT-Safe, stands for Multi Thread.
.IP
Being MT-Safe does not imply a function is atomic, nor that it uses any
of the memory synchronization mechanisms POSIX exposes to users.
It is even possible that calling MT-Safe functions in sequence
does not yield an MT-Safe combination.
For example, having a thread call two MT-Safe
functions one right after the other does not guarantee behavior
equivalent to atomic execution of a combination of both functions,
since concurrent calls in other threads may interfere in a destructive way.
.IP
Whole-program optimizations that could inline functions across library
interfaces may expose unsafe reordering, and so performing inlining
across the GNU C Library interface is not recommended.
The documented
MT-Safety status is not guaranteed under whole-program optimization.
However, functions defined in user-visible headers are designed to be
safe for inlining.
.\" .TP
.\" .I AS-Safe
.\" .I AS-Safe
.\" or Async-Signal-Safe functions are safe to call from
.\" asynchronous signal handlers.
.\" AS, in AS-Safe, stands for Asynchronous Signal.
.\"
.\" Many functions that are AS-Safe may set
.\" .IR errno ,
.\" or modify the floating-point environment,
.\" because their doing so does not make them
.\" unsuitable for use in signal handlers.
.\" However, programs could misbehave should asynchronous signal handlers
.\" modify this thread-local state,
.\" and the signal handling machinery cannot be counted on to
.\" preserve it.
.\" Therefore, signal handlers that call functions that may set
.\" .I errno
.\" or modify the floating-point environment
.\" .I must
.\" save their original values, and restore them before returning.
.\" .TP
.\" .I AC-Safe
.\" .I AC-Safe
.\" or Async-Cancel-Safe functions are safe to call when
.\" asynchronous cancelation is enabled.
.\" AC in AC-Safe stands for Asynchronous Cancelation.
.\"
.\" The POSIX standard defines only three functions to be AC-Safe, namely
.\" .BR pthread_cancel (3),
.\" .BR pthread_setcancelstate (3),
.\" and
.\" .BR pthread_setcanceltype (3).
.\" At present the GNU C Library provides no
.\" guarantees beyond these three functions,
.\" but does document which functions are presently AC-Safe.
.\" This documentation is provided for use
.\" by the GNU C Library developers.
.\"
.\" Just like signal handlers, cancelation cleanup routines must configure
.\" the floating point environment they require.
.\" The routines cannot assume a floating point environment,
.\" particularly when asynchronous cancelation is enabled.
.\" If the configuration of the floating point
.\" environment cannot be performed atomically then it is also possible that
.\" the environment encountered is internally inconsistent.
.TP
.I MT-Unsafe \" ", " AS-Unsafe ", " AC-Unsafe
.I MT-Unsafe \" ", " AS-Unsafe ", " AC-Unsafe
functions are not safe to call in a multithreaded programs.
.\" functions are not
.\" safe to call within the safety contexts described above.
.\" Calling them
.\" within such contexts invokes undefined behavior.
.\"
.\" Functions not explicitly documented as safe in a safety context should
.\" be regarded as Unsafe.
.\" .TP
.\" .I Preliminary
.\" .I Preliminary
.\" safety properties are documented, indicating these
.\" properties may
.\" .I not
.\" be counted on in future releases of
.\" the GNU C Library.
.\"
.\" Such preliminary properties are the result of an assessment of the
.\" properties of our current implementation,
.\" rather than of what is mandated and permitted
.\" by current and future standards.
.\"
.\" Although we strive to abide by the standards, in some cases our
.\" implementation is safe even when the standard does not demand safety,
.\" and in other cases our implementation does not meet the standard safety
.\" requirements.
.\" The latter are most likely bugs; the former, when marked
.\" as
.\" .IR Preliminary ,
.\" should not be counted on: future standards may
.\" require changes that are not compatible with the additional safety
.\" properties afforded by the current implementation.
.\"
.\" Furthermore,
.\" the POSIX standard does not offer a detailed definition of safety.
.\" We assume that, by "safe to call", POSIX means that,
.\" as long as the program does not invoke undefined behavior,
.\" the "safe to call" function behaves as specified,
.\" and does not cause other functions to deviate from their specified behavior.
.\" We have chosen to use its loose
.\" definitions of safety, not because they are the best definitions to use,
.\" but because choosing them harmonizes this manual with POSIX.
.\"
.\" Please keep in mind that these are preliminary definitions and annotations,
.\" and certain aspects of the definitions are still under
.\" discussion and might be subject to clarification or change.
.\"
.\" Over time,
.\" we envision evolving the preliminary safety notes into stable commitments,
.\" as stable as those of our interfaces.
.\" As we do, we will remove the
.\" .I Preliminary
.\" keyword from safety notes.
.\" As long as the keyword remains, however,
.\" they are not to be regarded as a promise of future behavior.
.P
Other keywords that appear in safety notes are defined in subsequent sections.
.\"
.\"
.\" .SS Unsafe features
.\" Functions that are unsafe to call in certain contexts are annotated with
.\" keywords that document their features that make them unsafe to call.
.\" AS-Unsafe features in this section indicate the functions are never safe
.\" to call when asynchronous signals are enabled.
.\" AC-Unsafe features
.\" indicate they are never safe to call when asynchronous cancelation is
.\" .\" enabled.
.\" There are no MT-Unsafe marks in this section.
.\" .TP
.\" .\" .I code
.\" Functions marked with
.\" .I lock
.\" as an AS-Unsafe feature may be
.\" .\" interrupted by a signal while holding a non-recursive lock.
.\" If the signal handler calls another such function that takes the same lock,
.\" the result is a deadlock.
.\"
.\" Functions annotated with
.\" .I lock
.\" as an AC-Unsafe feature may, if canceled asynchronously,
.\" fail to release a lock that would have been released if their execution
.\" had not been interrupted by asynchronous thread cancelation.
.\" Once a lock is left taken,
.\" attempts to take that lock will block indefinitely.
.\" .TP
.\" .I corrupt
.\" Functions marked with
.\" .\" .I corrupt
.\" as an AS-Unsafe feature may corrupt
.\" data structures and misbehave when they interrupt,
.\" or are interrupted by, another such function.
.\" Unlike functions marked with
.\" .IR lock ,
.\" these take recursive locks to avoid MT-Safety problems,
.\" but this is not enough to stop a signal handler from observing
.\" a partially-updated data structure.
.\" Further corruption may arise from the interrupted function's
.\" failure to notice updates made by signal handlers.
.\"
.\" Functions marked with
.\" .I corrupt
.\" as an AC-Unsafe feature may leave
.\" data structures in a corrupt, partially updated state.
.\" Subsequent uses of the data structure may misbehave.
.\"
.\" .\" A special case, probably not worth documenting separately, involves
.\" .\" reallocing, or even freeing pointers.  Any case involving free could
.\" .\" be easily turned into an ac-safe leak by resetting the pointer before
.\" .\" releasing it; I don't think we have any case that calls for this sort
.\" .\" of fixing.  Fixing the realloc cases would require a new interface:
.\" .\" instead of @code{ptr=realloc(ptr,size)} we'd have to introduce
.\" .\" @code{acsafe_realloc(&ptr,size)} that would modify ptr before
.\" .\" releasing the old memory.  The ac-unsafe realloc could be implemented
.\" .\" in terms of an internal interface with this semantics (say
.\" .\" __acsafe_realloc), but since realloc can be overridden, the function
.\" .\" we call to implement realloc should not be this internal interface,
.\" .\" but another internal interface that calls __acsafe_realloc if realloc
.\" .\" was not overridden, and calls the overridden realloc with async
.\" .\" cancel disabled.  --lxoliva
.\" .TP
.\" .I heap
.\" Functions marked with
.\" .I heap
.\" may call heap memory management functions from the
.\" .BR malloc (3)/ free (3)
.\" family of functions and are only as safe as those functions.
.\" This note is thus equivalent to:
.\"
.\"     | AS-Unsafe lock | AC-Unsafe lock fd mem |
.\" .\" @sampsafety{@asunsafe{@asulock{}}@acunsafe{@aculock{} @acsfd{} @acsmem{}}}
.\" .\"
.\" .\" Check for cases that should have used plugin instead of or in
.\" .\" addition to this.  Then, after rechecking gettext, adjust i18n if
.\" .\" needed.
.\" .TP
.\" .I dlopen
.\" Functions marked with
.\" .I dlopen
.\" use the dynamic loader to load
.\" shared libraries into the current execution image.
.\" This involves opening files, mapping them into memory,
.\" allocating additional memory, resolving symbols,
.\" applying relocations and more,
.\" all of this while holding internal dynamic loader locks.
.\"
.\" The locks are enough for these functions to be AS-Unsafe and AC-Unsafe,
.\" but other issues may arise.
.\" At present this is a placeholder for all
.\" potential safety issues raised by
.\" .BR dlopen (3).
.\"
.\" .\" dlopen runs init and fini sections of the module; does this mean
.\" .\" dlopen always implies plugin?
.\" .TP
.\" .I plugin
.\" Functions annotated with
.\" .I plugin
.\" may run code from plugins that
.\" may be external to the GNU C Library.
.\" Such plugin functions are assumed to be
.\" MT-Safe, AS-Unsafe and AC-Unsafe.
.\" Examples of such plugins are stack unwinding libraries,
.\" name service switch (NSS) and character set conversion (iconv) back-ends.
.\"
.\" Although the plugins mentioned as examples are all brought in by means
.\" of dlopen, the
.\" .I plugin
.\" keyword does not imply any direct
.\" involvement of the dynamic loader or the
.\" .I libdl
.\" interfaces,
.\" those are covered by
.\" .IR dlopen .
.\" For example, if one function loads a module and finds the addresses
.\" of some of its functions,
.\" while another just calls those already-resolved functions,
.\" the former will be marked with
.\" .IR dlopen ,
.\" whereas the latter will get the
.\" .IR plugin .
.\" When a single function takes all of these actions, then it gets both marks.
.\" .TP
.\" .I i18n
.\" Functions marked with
.\" .I i18n
.\" may call internationalization
.\" functions of the
.\" .BR gettext (3)
.\" family and will be only as safe as those
.\" functions.
.\" This note is thus equivalent to:
.\"
.\"     | MT-Safe env | AS-Unsafe corrupt heap dlopen | AC-Unsafe corrupt |
.\"
.\" .\" @sampsafety{@mtsafe{@mtsenv{}}@asunsafe{@asucorrupt{} @ascuheap{} @ascudlopen{}}@acunsafe{@acucorrupt{}}}
.\" .TP
.\" .I timer
.\" Functions marked with
.\" .I timer
.\" use the
.\" .BR alarm (3)
.\" function or
.\" similar to set a time-out for a system call or a long-running operation.
.\" In a multi-threaded program, there is a risk that the time-out signal
.\" will be delivered to a different thread,
.\" thus failing to interrupt the intended thread.
.\" Besides being MT-Unsafe, such functions are always
.\" AS-Unsafe, because calling them in signal handlers may interfere with
.\" timers set in the interrupted code, and AC-Unsafe,
.\" because there is no safe way to guarantee an earlier timer
.\" will be reset in case of asynchronous cancelation.
.\"
.\"
.SS Conditionally safe features
For some features that make functions unsafe to call in certain contexts,
there are known ways to avoid the safety problem other than
refraining from calling the function altogether.
The keywords that follow refer to such features,
and each of their definitions indicates
how the whole program needs to be constrained in order to remove the
safety problem indicated by the keyword.
Only when all the reasons that
make a function unsafe are observed and addressed,
by applying the documented constraints,
does the function become safe to call in a context.
.TP
.I init
Functions marked with
.I init
as an MT-Unsafe feature perform
MT-Unsafe initialization when they are first called.
.IP
Calling such a function at least once in single-threaded mode removes
this specific cause for the function to be regarded as MT-Unsafe.
If no other cause for that remains,
the function can then be safely called after other threads are started.
.\"
.\" Functions marked with
.\" .I init
.\" as an AS-Unsafe or AC-Unsafe feature use the GNU C Library internal
.\" .I libc_once
.\" machinery or similar to initialize internal data structures.
.\"
.\" If a signal handler interrupts such an initializer,
.\" and calls any function that also performs
.\" .I libc_once
.\" initialization, it will deadlock if the thread library has been loaded.
.\"
.\" Furthermore, if an initializer is partially complete before it is canceled
.\" or interrupted by a signal whose handler requires the same initialization,
.\" some or all of the initialization may be performed more than once,
.\" leaking resources or even resulting in corrupt internal data.
.\"
.\" Applications that need to call functions marked with
.\" .I init
.\" as an AS-Safety or AC-Unsafe feature should ensure
.\" the initialization is performed
.\" before configuring signal handlers or enabling cancelation,
.\" so that the AS-Safety and AC-Safety issues related with
.\" .I libc_once
.\" do not arise.
.\"
.\" .\" We may have to extend the annotations to cover conditions in which
.\" .\" initialization may or may not occur, since an initial call in a safe
.\" .\" context is no use if the initialization doesn't take place at that
.\" .\" time: it doesn't remove the risk for later calls.
.TP
.I race
Functions annotated with
.I race
as an MT-Safety issue operate on
objects in ways that may cause data races or similar forms of
destructive interference out of concurrent execution.
In some cases,
the objects are passed to the functions by users;
in others, they are used by the functions to return values to users;
in others, they are not even exposed to users.
.\"
.\" We consider access to objects passed as (indirect) arguments to
.\" functions to be data race free.
.\" The assurance of data race free objects
.\" is the caller's responsibility.
.\" We will not mark a function as MT-Unsafe or AS-Unsafe
.\" if it misbehaves when users fail to take the measures required by
.\" POSIX to avoid data races when dealing with such objects.
.\" As a general rule, if a function is documented as reading from
.\" an object passed (by reference) to it, or modifying it,
.\" users ought to use memory synchronization primitives
.\" to avoid data races just as they would should they perform
.\" the accesses themselves rather than by calling the library function.
.\" Standard I/O
.\" .RI ( "FILE *" )
.\" streams are the exception to the general rule,
.\" in that POSIX mandates the library to guard against data races
.\" in many functions that manipulate objects of this specific opaque type.
.\" We regard this as a convenience provided to users,
.\" rather than as a general requirement whose expectations
.\" should extend to other types.
.\"
.\" In order to remind users that guarding certain arguments is their
.\" responsibility, we will annotate functions that take objects of certain
.\" types as arguments.
.\" We draw the line for objects passed by users as follows:
.\" objects whose types are exposed to users,
.\" and that users are expected to access directly,
.\" such as memory buffers, strings,
.\" and various user-visible structured types, do
.\" .I not
.\" give reason for functions to be annotated with
.\" .IR race .
.\" It would be noisy and redundant with the general requirement,
.\" and not many would be surprised by the library's lack of internal
.\" guards when accessing objects that can be accessed directly by users.
.\"
.\" As for objects that are opaque or opaque-like,
.\" in that they are to be manipulated only by passing them
.\" to library functions (e.g.,
.\" .IR FILE ,
.\" .IR DIR ,
.\" .IR obstack ,
.\" .IR iconv_t ),
.\" there might be additional expectations as to internal coordination
.\" of access by the library.
.\" We will annotate, with
.\" .I race
.\" followed by a colon and the argument name,
.\" functions that take such objects but that do not take
.\" care of synchronizing access to them by default.
.\" For example,
.\" .I FILE
.\" stream
.\" .I unlocked
.\" functions
.\" .RB ( unlocked_stdio (3))
.\" will be annotated,
.\" but those that perform implicit locking on
.\" .I FILE
.\" streams by default will not,
.\" even though the implicit locking may be disabled on a per-stream basis.
.\"
.\" In either case, we will not regard as MT-Unsafe functions that may
.\" access user-supplied objects in unsafe ways should users fail to ensure
.\" the accesses are well defined.
.\" The notion prevails that users are expected to safeguard against
.\" data races any user-supplied objects that the library accesses
.\" on their behalf.
.\"
.\" .\" The above describes @mtsrace; @mtasurace is described below.
.\"
.\" This user responsibility does not apply, however,
.\" to objects controlled by the library itself,
.\" such as internal objects and static buffers used
.\" to return values from certain calls.
.\" When the library doesn't guard them against concurrent uses,
.\" these cases are regarded as MT-Unsafe and AS-Unsafe (although the
.\" .I race
.\" mark under AS-Unsafe will be omitted
.\" as redundant with the one under MT-Unsafe).
.\" As in the case of user-exposed objects,
.\" the mark may be followed by a colon and an identifier.
.\" The identifier groups all functions that operate on a
.\" certain unguarded object; users may avoid the MT-Safety issues related
.\" with unguarded concurrent access to such internal objects by creating a
.\" non-recursive mutex related with the identifier,
.\" and always holding the mutex when calling any function marked
.\" as racy on that identifier,
.\" as they would have to should the identifier be
.\" an object under user control.
.\" The non-recursive mutex avoids the MT-Safety issue,
.\" but it trades one AS-Safety issue for another,
.\" so use in asynchronous signals remains undefined.
.\"
.\" When the identifier relates to a static buffer used to hold return values,
.\" the mutex must be held for as long as the buffer remains in use
.\" by the caller.
.\" Many functions that return pointers to static buffers offer reentrant
.\" variants that store return values in caller-supplied buffers instead.
.\" In some cases, such as
.\" .BR tmpname (3),
.\" the variant is chosen not by calling an alternate entry point,
.\" but by passing a non-null pointer to the buffer in which the
.\" returned values are to be stored.
.\" These variants are generally preferable in multi-threaded programs,
.\" although some of them are not MT-Safe because of other internal buffers,
.\" also documented with
.\" .I race
.\" notes.
.TP
.I const
Functions marked with
.I const
as an MT-Safety issue non-atomically
modify internal objects that are better regarded as constant,
because a substantial portion of the GNU C Library accesses them without
synchronization.
Unlike
.IR race ,
which causes both readers and
writers of internal objects to be regarded as MT-Unsafe,\" and AS-Unsafe,
this mark is applied to writers only.
Writers remain\" equally
MT-Unsafe\" and AS-Unsafe
to call,
but the then-mandatory constness of objects they
modify enables readers to be regarded as MT-Safe\" and AS-Safe
(as long as no other reasons for them to be unsafe remain),
since the lack of synchronization is not a problem when the
objects are effectively constant.
.IP
The identifier that follows the
.I const
mark will appear by itself as a safety note in readers.
Programs that wish to work around this safety issue,
so as to call writers, may use a non-recursive
read-write lock
associated with the identifier, and guard
.I all
calls to functions marked with
.I const
followed by the identifier with a write lock, and
.I all
calls to functions marked with the identifier
by itself with a read lock.
.\" The non-recursive locking removes the MT-Safety problem,
.\" but it trades one AS-Safety problem for another,
.\" so use in asynchronous signals remains undefined.
.\"
.\" .\" But what if, instead of marking modifiers with const:id and readers
.\" .\" with just id, we marked writers with race:id and readers with ro:id?
.\" .\" Instead of having to define each instance of 'id', we'd have a
.\" .\" general pattern governing all such 'id's, wherein race:id would
.\" .\" suggest the need for an exclusive/write lock to make the function
.\" .\" safe, whereas ro:id would indicate 'id' is expected to be read-only,
.\" .\" but if any modifiers are called (while holding an exclusive lock),
.\" .\" then ro:id-marked functions ought to be guarded with a read lock for
.\" .\" safe operation.  ro:env or ro:locale, for example, seems to convey
.\" .\" more clearly the expectations and the meaning, than just env or
.\" .\" locale.
.TP
.I sig
Functions marked with
.I sig
as a MT-Safety issue
.\" (that implies an identical AS-Safety issue, omitted for brevity)
may temporarily install a signal handler for internal purposes,
which may interfere with other uses of the signal,
identified after a colon.
.IP
This safety problem can be worked around by ensuring that no other uses
of the signal will take place for the duration of the call.
Holding a non-recursive mutex while calling all functions that use the same
temporary signal;
blocking that signal before the call and resetting its
handler afterwards is recommended.
.\"
.\" There is no safe way to guarantee the original signal handler is
.\" restored in case of asynchronous cancelation,
.\" therefore so-marked functions are also AC-Unsafe.
.\"
.\" .\" fixme: at least deferred cancelation should get it right, and would
.\" .\" obviate the restoring bit below, and the qualifier above.
.\"
.\" Besides the measures recommended to work around the
.\" MT-Safety and AS-Safety problem,
.\" in order to avert the cancelation problem,
.\" disabling asynchronous cancelation
.\" .I and
.\" installing a cleanup handler to restore the signal to the desired state
.\" and to release the mutex are recommended.
.TP
.I term
Functions marked with
.I term
as an MT-Safety issue may change the
terminal settings in the recommended way, namely: call
.BR tcgetattr (3),
modify some flags, and then call
.BR tcsetattr (3),
this creates a window in which changes made by other threads are lost.
Thus, functions marked with
.I term
are MT-Unsafe.
.\" The same window enables changes made by asynchronous signals to be lost.
.\" These functions are also AS-Unsafe,
.\" but the corresponding mark is omitted as redundant.
.IP
It is thus advisable for applications using the terminal to avoid
concurrent and reentrant interactions with it,
by not using it in signal handlers or blocking signals that might use it,
and holding a lock while calling these functions and interacting
with the terminal.
This lock should also be used for mutual exclusion with
functions marked with
.IR race:tcattr(fd) ,
where
.I fd
is a file descriptor for the controlling terminal.
The caller may use a single mutex for simplicity,
or use one mutex per terminal,
even if referenced by different file descriptors.
.\"
.\" Functions marked with
.\" .I term
.\" as an AC-Safety issue are supposed to
.\" restore terminal settings to their original state,
.\" after temporarily changing them, but they may fail to do so if canceled.
.\"
.\" .\" fixme: at least deferred cancelation should get it right, and would
.\" .\" obviate the restoring bit below, and the qualifier above.
.\"
.\" Besides the measures recommended to work around the
.\" MT-Safety and AS-Safety problem,
.\" in order to avert the cancelation problem,
.\" disabling asynchronous cancelation
.\" .I and
.\" installing a cleanup handler to
.\" restore the terminal settings to the original state and to release the
.\" mutex are recommended.
.\"
.\"
.SS Other safety remarks
Additional keywords may be attached to functions,
indicating features that do not make a function unsafe to call,
but that may need to be taken into account in certain classes of programs:
.TP
.I locale
Functions annotated with
.I locale
as an MT-Safety issue read from
the locale object without any form of synchronization.
Functions
annotated with
.I locale
called concurrently with locale changes may
behave in ways that do not correspond to any of the locales active
during their execution, but an unpredictable mix thereof.
.IP
We do not mark these functions as MT-Unsafe,\" or AS-Unsafe,
however,
because functions that modify the locale object are marked with
.I const:locale
and regarded as unsafe.
Being unsafe, the latter are not to be called when multiple threads
are running or asynchronous signals are enabled,
and so the locale can be considered effectively constant
in these contexts,
which makes the former safe.
.\" Should the locking strategy suggested under @code{const} be used,
.\" failure to guard locale uses is not as fatal as data races in
.\" general: unguarded uses will @emph{not} follow dangling pointers or
.\" access uninitialized, unmapped or recycled memory.  Each access will
.\" read from a consistent locale object that is or was active at some
.\" point during its execution.  Without synchronization, however, it
.\" cannot even be assumed that, after a change in locale, earlier
.\" locales will no longer be used, even after the newly-chosen one is
.\" used in the thread.  Nevertheless, even though unguarded reads from
.\" the locale will not violate type safety, functions that access the
.\" locale multiple times may invoke all sorts of undefined behavior
.\" because of the unexpected locale changes.
.TP
.I env
Functions marked with
.I env
as an MT-Safety issue access the
environment with
.BR getenv (3)
or similar, without any guards to ensure
safety in the presence of concurrent modifications.
.IP
We do not mark these functions as MT-Unsafe,\" or AS-Unsafe,
however,
because functions that modify the environment are all marked with
.I const:env
and regarded as unsafe.
Being unsafe, the latter are not to be called when multiple threads
are running or asynchronous signals are enabled,
and so the environment can be considered
effectively constant in these contexts,
which makes the former safe.
.TP
.I hostid
The function marked with
.I hostid
as an MT-Safety issue reads from the system-wide data structures that
hold the "host ID" of the machine.
These data structures cannot generally be modified atomically.
Since it is expected that the "host ID" will not normally change,
the function that reads from it
.RB ( gethostid (3))
is regarded as safe,
whereas the function that modifies it
.RB ( sethostid (3))
is marked with
.IR const:hostid ,
indicating it may require special care if it is to be called.
In this specific case,
the special care amounts to system-wide
(not merely intra-process) coordination.
.TP
.I sigintr
Functions marked with
.I sigintr
as an MT-Safety issue access the
GNU C Library
.I _sigintr
internal data structure without any guards to ensure
safety in the presence of concurrent modifications.
.IP
We do not mark these functions as MT-Unsafe,\" or AS-Unsafe,
however,
because functions that modify this data structure are all marked with
.I const:sigintr
and regarded as unsafe.
Being unsafe,
the latter are not to be called when multiple threads are
running or asynchronous signals are enabled,
and so the data structure can be considered
effectively constant in these contexts,
which makes the former safe.
.\" .TP
.\" .I fd
.\" Functions annotated with
.\" .I fd
.\" as an AC-Safety issue may leak file
.\" descriptors if asynchronous thread cancelation interrupts their
.\" execution.
.\"
.\" Functions that allocate or deallocate file descriptors will generally be
.\" marked as such.
.\" Even if they attempted to protect the file descriptor
.\" allocation and deallocation with cleanup regions,
.\" allocating a new descriptor and storing its number where the cleanup region
.\" could release it cannot be performed as a single atomic operation.
.\" Similarly,
.\" releasing the descriptor and taking it out of the data structure
.\" normally responsible for releasing it cannot be performed atomically.
.\" There will always be a window in which the descriptor cannot be released
.\" because it was not stored in the cleanup handler argument yet,
.\" or it was already taken out before releasing it.
.\" .\" It cannot be taken out after release:
.\" an open descriptor could mean either that the descriptor still
.\" has to be closed,
.\" or that it already did so but the descriptor was
.\" reallocated by another thread or signal handler.
.\"
.\" Such leaks could be internally avoided, with some performance penalty,
.\" by temporarily disabling asynchronous thread cancelation.
.\" However,
.\" since callers of allocation or deallocation functions would have to do
.\" this themselves, to avoid the same sort of leak in their own layer,
.\" it makes more sense for the library to assume they are taking care of it
.\" than to impose a performance penalty that is redundant when the problem
.\" is solved in upper layers, and insufficient when it is not.
.\"
.\" This remark by itself does not cause a function to be regarded as
.\" AC-Unsafe.
.\" However, cumulative effects of such leaks may pose a
.\" problem for some programs.
.\" If this is the case,
.\" suspending asynchronous cancelation for the duration of calls
.\" to such functions is recommended.
.\" .TP
.\" .I mem
.\" Functions annotated with
.\" .I mem
.\" as an AC-Safety issue may leak
.\" memory if asynchronous thread cancelation interrupts their execution.
.\"
.\" The problem is similar to that of file descriptors: there is no atomic
.\" interface to allocate memory and store its address in the argument to a
.\" cleanup handler,
.\" or to release it and remove its address from that argument,
.\" without at least temporarily disabling asynchronous cancelation,
.\" which these functions do not do.
.\"
.\" This remark does not by itself cause a function to be regarded as
.\" generally AC-Unsafe.
.\" However, cumulative effects of such leaks may be
.\" severe enough for some programs that disabling asynchronous cancelation
.\" for the duration of calls to such functions may be required.
.TP
.I cwd
Functions marked with
.I cwd
as an MT-Safety issue may temporarily
change the current working directory during their execution,
which may cause relative pathnames to be resolved in unexpected ways in
other threads or within asynchronous signal or cancelation handlers.
.IP
This is not enough of a reason to mark so-marked functions as MT-Unsafe,
.\" or AS-Unsafe,
but when this behavior is optional (e.g.,
.BR nftw (3)
with
.BR FTW_CHDIR ),
avoiding the option may be a good alternative to
using full pathnames or file descriptor-relative (e.g.,
.BR openat (2))
system calls.
.\" .TP
.\" .I !posix
.\" This remark, as an MT-Safety, AS-Safety or AC-Safety
.\" note to a function,
.\" indicates the safety status of the function is known to differ
.\" from the specified status in the POSIX standard.
.\" For example, POSIX does not require a function to be Safe,
.\" but our implementation is, or vice-versa.
.\"
.\" For the time being, the absence of this remark does not imply the safety
.\" properties we documented are identical to those mandated by POSIX for
.\" the corresponding functions.
.TP
.I :identifier
Annotations may sometimes be followed by identifiers,
intended to group several functions that, for example,
access the data structures in an unsafe way, as in
.I race
and
.IR const ,
or to provide more specific information,
such as naming a signal in a function marked with
.IR sig .
It is envisioned that it may be applied to
.I lock
and
.I corrupt
as well in the future.
.IP
In most cases, the identifier will name a set of functions,
but it may name global objects or function arguments,
or identifiable properties or logical components associated with them,
with a notation such as, for example,
.I :buf(arg)
to denote a buffer associated with the argument
.IR arg ,
or
.I :tcattr(fd)
to denote the terminal attributes of a file descriptor
.IR fd .
.IP
The most common use for identifiers is to provide logical groups of
functions and arguments that need to be protected by the same
synchronization primitive in order to ensure safe operation in a given
context.
.TP
.I /condition
Some safety annotations may be conditional,
in that they only apply if a boolean expression involving arguments,
global variables or even the underlying kernel evaluates to true.
.\" Such conditions as
.\" .I /hurd
.\" or
.\" .I /!linux!bsd
.\" indicate the preceding marker only
.\" applies when the underlying kernel is the HURD,
.\" or when it is neither Linux nor a BSD kernel, respectively.
For example,
.I /!ps
and
.I /one_per_line
indicate the preceding marker only applies when argument
.I ps
is NULL, or global variable
.I one_per_line
is nonzero.
.IP
When all marks that render a function unsafe are
adorned with such conditions,
and none of the named conditions hold,
then the function can be regarded as safe.
.SH SEE ALSO
.BR pthreads (7),
.BR signal\-safety (7)