diff options
Diffstat (limited to 'debian/tests/traces/mariadb-verbose-help.expected')
| -rw-r--r-- | debian/tests/traces/mariadb-verbose-help.expected | 159 |
1 files changed, 80 insertions, 79 deletions
diff --git a/debian/tests/traces/mariadb-verbose-help.expected b/debian/tests/traces/mariadb-verbose-help.expected index 015a0430..2c81bd35 100644 --- a/debian/tests/traces/mariadb-verbose-help.expected +++ b/debian/tests/traces/mariadb-verbose-help.expected @@ -19,8 +19,7 @@ The following specify which files/extra groups are read (specified before remain Abort 'source filename' operations in case of errors --auto-rehash Enable automatic rehashing. One doesn't need to use 'rehash' to get table and field completion, but startup - and reconnecting may take a longer time. Disable with - --disable-auto-rehash. + and reconnecting may take a longer time. (Defaults to on; use --skip-auto-rehash to disable.) -A, --no-auto-rehash No automatic rehashing. One has to use 'rehash' to get @@ -32,27 +31,61 @@ The following specify which files/extra groups are read (specified before remain -B, --batch Don't use history file. Disable interactive behavior. (Enables --silent.) --binary-as-hex Print binary data as hex + --binary-mode Binary mode allows certain character sequences to be + processed as data that would otherwise be treated with a + special meaning by the parser. Specifically, this switch + turns off parsing of all client commands except \C and + DELIMITER in non-interactive mode (i.e., when binary mode + is combined with either 1) piped input, 2) the --batch + mysql option, or 3) the 'source' command). Also, in + binary mode, occurrences of '\r\n' and ASCII '\0' are + preserved within strings, whereas by default, '\r\n' is + translated to '\n' and '\0' is disallowed in user input. --character-sets-dir=name Directory for character set files. + --column-names Write column names in results. + (Defaults to on; use --skip-column-names to disable.) + -N, --skip-column-names + Don't write column names in results. --column-type-info Display column type information. -c, --comments Preserve comments. Send comments to the server. The default is --skip-comments (discard comments), enable with --comments. -C, --compress Use compression in server/client protocol. + --connect-expired-password + Notify the server that this client is prepared to handle + expired password sandbox mode even if --batch was + specified. + --connect-timeout=# Number of seconds before connection timeout. + -D, --database=name Database to use. -#, --debug[=#] This is a non-debug version. Catch this and exit. --debug-check Check memory and open file usage at exit. -T, --debug-info Print some debug info at exit. - -D, --database=name Database to use. + --default-auth=name Default authentication client-side plugin to use. --default-character-set=name Set the default character set. --delimiter=name Delimiter to be used. - -e, --execute=name Execute command and quit. (Disables --force and history - file.) --enable-cleartext-plugin Obsolete option. Exists only for MySQL compatibility. - -E, --vertical Print the output of a query (rows) vertically. + -e, --execute=name Execute command and quit. (Disables --force and history + file.) -f, --force Continue even if we get an SQL error. Sets abort-source-on-error to 0 + -h, --host=name Connect to host. + -H, --html Produce HTML output. + -i, --ignore-spaces Ignore space after function names. + --init-command=name SQL Command to execute when connecting to MariaDB server. + Will automatically be re-executed when reconnecting. + --line-numbers Write line numbers for errors. + (Defaults to on; use --skip-line-numbers to disable.) + -L, --skip-line-numbers + Don't write line number for errors. + --local-infile Enable LOAD DATA LOCAL INFILE. + --max-allowed-packet=# + The maximum packet length to send to or receive from + server. + --max-join-size=# Automatic limit for rows in a join when using + --safe-updates. -G, --named-commands Enable named commands. Named commands mean this program's internal commands; see mysql> help . When enabled, the @@ -60,24 +93,9 @@ The following specify which files/extra groups are read (specified before remain otherwise only from the first line, before an enter. Disable with --disable-named-commands. This option is disabled by default. - -i, --ignore-spaces Ignore space after function names. - --init-command=name SQL Command to execute when connecting to MariaDB server. - Will automatically be re-executed when reconnecting. - --local-infile Enable/disable LOAD DATA LOCAL INFILE. + --net-buffer-length=# + The buffer size for TCP/IP and socket communication. -b, --no-beep Turn off beep on error. - -h, --host=name Connect to host. - -H, --html Produce HTML output. - -X, --xml Produce XML output. - --line-numbers Write line numbers for errors. - (Defaults to on; use --skip-line-numbers to disable.) - -L, --skip-line-numbers - Don't write line number for errors. - -n, --unbuffered Flush buffer after each query. - --column-names Write column names in results. - (Defaults to on; use --skip-column-names to disable.) - -N, --skip-column-names - Don't write column names in results. - --sigint-ignore Ignore SIGINT (CTRL-C). -o, --one-database Ignore statements except those that occur while the default database is the one named at the command line. --pager[=name] Pager to use to display results. If you don't supply an @@ -89,6 +107,7 @@ The following specify which files/extra groups are read (specified before remain -p, --password[=name] Password to use when connecting to server. If password is not given it's asked from the tty. + --plugin-dir=name Directory for client-side plugins. -P, --port=# Port number to use for connection or 0 for default to, in order of preference, my.cnf, $MYSQL_TCP_PORT, /etc/services, built-in default (3306). @@ -101,9 +120,18 @@ The following specify which files/extra groups are read (specified before remain down the server if the output is suspended. Doesn't use history file. -r, --raw Write fields without conversion. Used with --batch. - --reconnect Reconnect if the connection is lost. Disable with - --disable-reconnect. This option is enabled by default. + --reconnect Reconnect if the connection is lost. (Defaults to on; use --skip-reconnect to disable.) + -U, --safe-updates Only allow UPDATE and DELETE that uses keys. + -U, --i-am-a-dummy Synonym for option --safe-updates, -U. + --sandbox Disallow commands that access the file system (except \P + without an argument and \e). + --secure-auth Refuse client connecting to server if it uses old + (pre-4.1.1) protocol. + --select-limit=# Automatic limit for SELECT when using --safe-updates. + --server-arg=name Send embedded server this as a parameter. + --show-warnings Show warnings after every statement. + --sigint-ignore Ignore SIGINT (CTRL-C). -s, --silent Be more silent. Print results with a tab as separator, each row on new line. -S, --socket=name The socket file to use for connection. @@ -127,41 +155,13 @@ The following specify which files/extra groups are read (specified before remain --tee=name Append everything into outfile. See interactive help (\h) also. Does not work in batch mode. Disable with --disable-tee. This option is disabled by default. + -n, --unbuffered Flush buffer after each query. -u, --user=name User for login if not current user. - -U, --safe-updates Only allow UPDATE and DELETE that uses keys. - -U, --i-am-a-dummy Synonym for option --safe-updates, -U. -v, --verbose Write more. (-v -v -v gives the table output format). -V, --version Output version information and exit. + -E, --vertical Print the output of a query (rows) vertically. -w, --wait Wait and retry if connection is down. - --connect-timeout=# Number of seconds before connection timeout. - --max-allowed-packet=# - The maximum packet length to send to or receive from - server. - --net-buffer-length=# - The buffer size for TCP/IP and socket communication. - --select-limit=# Automatic limit for SELECT when using --safe-updates. - --max-join-size=# Automatic limit for rows in a join when using - --safe-updates. - --secure-auth Refuse client connecting to server if it uses old - (pre-4.1.1) protocol. - --server-arg=name Send embedded server this as a parameter. - --show-warnings Show warnings after every statement. - --plugin-dir=name Directory for client-side plugins. - --default-auth=name Default authentication client-side plugin to use. - --binary-mode Binary mode allows certain character sequences to be - processed as data that would otherwise be treated with a - special meaning by the parser. Specifically, this switch - turns off parsing of all client commands except \C and - DELIMITER in non-interactive mode (i.e., when binary mode - is combined with either 1) piped input, 2) the --batch - mysql option, or 3) the 'source' command). Also, in - binary mode, occurrences of '\r\n' and ASCII '\0' are - preserved within strings, whereas by default, '\r\n' is - translated to '\n' and '\0' is disallowed in user input. - --connect-expired-password - Notify the server that this client is prepared to handle - expired password sandbox mode even if --batch was - specified. + -X, --xml Produce XML output. Variables (--variable-name=value) and boolean options {FALSE|TRUE} Value (after reading options) @@ -170,29 +170,33 @@ abort-source-on-error FALSE auto-rehash TRUE auto-vertical-output FALSE binary-as-hex FALSE +binary-mode FALSE character-sets-dir (No default value) +column-names TRUE column-type-info FALSE comments FALSE compress FALSE +connect-expired-password FALSE +connect-timeout 0 +database (No default value) debug-check FALSE debug-info FALSE -database (No default value) +default-auth (No default value) default-character-set auto delimiter ; -vertical FALSE force FALSE -named-commands FALSE +host (No default value) +html FALSE ignore-spaces FALSE init-command (No default value) +line-numbers TRUE local-infile FALSE +max-allowed-packet 16777216 +max-join-size 1000000 +named-commands FALSE +net-buffer-length 16384 no-beep FALSE -host (No default value) -html FALSE -xml FALSE -line-numbers TRUE -unbuffered FALSE -column-names TRUE -sigint-ignore FALSE +plugin-dir (No default value) port 0 progress-reports TRUE prompt \N [\d]> @@ -200,6 +204,13 @@ protocol quick FALSE raw FALSE reconnect TRUE +safe-updates FALSE +i-am-a-dummy FALSE +sandbox FALSE +secure-auth FALSE +select-limit 1000 +show-warnings FALSE +sigint-ignore FALSE socket /run/mysqld/mysqld.sock ssl TRUE ssl-ca (No default value) @@ -212,17 +223,7 @@ ssl-crlpath (No default value) tls-version (No default value) ssl-verify-server-cert FALSE table FALSE +unbuffered FALSE user (No default value) -safe-updates FALSE -i-am-a-dummy FALSE -connect-timeout 0 -max-allowed-packet 16777216 -net-buffer-length 16384 -select-limit 1000 -max-join-size 1000000 -secure-auth FALSE -show-warnings FALSE -plugin-dir (No default value) -default-auth (No default value) -binary-mode FALSE -connect-expired-password FALSE +vertical FALSE +xml FALSE |