/* Copyright (c) 2006, 2017, Oracle and/or its affiliates. Copyright (c) 2010, 2020, MariaDB Corporation. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; version 2 of the License. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335 USA */ #include "mariadb.h" #include "sql_priv.h" #include "unireg.h" // HAVE_* #include "rpl_mi.h" #include "rpl_rli.h" #include "sql_base.h" // close_thread_tables #include // For MY_STAT #include "sql_repl.h" // For check_binlog_magic #include "log_event.h" // Format_description_log_event, Log_event, // FORMAT_DESCRIPTION_LOG_EVENT, ROTATE_EVENT, // PREFIX_SQL_LOAD #include "rpl_utility.h" #include "transaction.h" #include "sql_parse.h" // end_trans, ROLLBACK #include "slave.h" #include #include #include "lock.h" #include "sql_table.h" static int count_relay_log_space(Relay_log_info* rli); bool xa_trans_force_rollback(THD *thd); /** Current replication state (hash of last GTID executed, per replication domain). */ rpl_slave_state *rpl_global_gtid_slave_state; /* Object used for MASTER_GTID_WAIT(). */ gtid_waiting rpl_global_gtid_waiting; Relay_log_info::Relay_log_info(bool is_slave_recovery, const char* thread_name) :Slave_reporting_capability(thread_name), replicate_same_server_id(::replicate_same_server_id), info_fd(-1), cur_log_fd(-1), relay_log(&sync_relaylog_period), sync_counter(0), is_relay_log_recovery(is_slave_recovery), save_temporary_tables(0), mi(0), inuse_relaylog_list(0), last_inuse_relaylog(0), cur_log_old_open_count(0), error_on_rli_init_info(false), group_relay_log_pos(0), event_relay_log_pos(0), group_master_log_pos(0), log_space_total(0), ignore_log_space_limit(0), last_master_timestamp(0), sql_thread_caught_up(true), slave_skip_counter(0), abort_pos_wait(0), slave_run_id(0), sql_driver_thd(), gtid_skip_flag(GTID_SKIP_NOT), inited(0), abort_slave(0), stop_for_until(0), slave_running(MYSQL_SLAVE_NOT_RUN), until_condition(UNTIL_NONE), until_log_pos(0), is_until_before_gtids(false), retried_trans(0), executed_entries(0), last_trans_retry_count(0), sql_delay(0), sql_delay_end(0), until_relay_log_names_defer(false), m_flags(0) { DBUG_ENTER("Relay_log_info::Relay_log_info"); relay_log.is_relay_log= TRUE; relay_log_state.init(); #ifdef HAVE_PSI_INTERFACE relay_log.set_psi_keys(key_RELAYLOG_LOCK_index, key_RELAYLOG_COND_relay_log_updated, key_RELAYLOG_COND_bin_log_updated, key_file_relaylog, key_file_relaylog_cache, key_file_relaylog_index, key_file_relaylog_index_cache, key_RELAYLOG_COND_queue_busy, key_LOCK_relaylog_end_pos); #endif group_relay_log_name[0]= event_relay_log_name[0]= group_master_log_name[0]= 0; until_log_name[0]= ign_master_log_name_end[0]= 0; max_relay_log_size= global_system_variables.max_relay_log_size; bzero((char*) &info_file, sizeof(info_file)); bzero((char*) &cache_buf, sizeof(cache_buf)); bzero(&last_seen_gtid, sizeof(last_seen_gtid)); mysql_mutex_init(key_relay_log_info_run_lock, &run_lock, MY_MUTEX_INIT_FAST); mysql_mutex_init(key_relay_log_info_data_lock, &data_lock, MY_MUTEX_INIT_FAST); mysql_mutex_init(key_relay_log_info_log_space_lock, &log_space_lock, MY_MUTEX_INIT_FAST); mysql_cond_init(key_relay_log_info_data_cond, &data_cond, NULL); mysql_cond_init(key_relay_log_info_start_cond, &start_cond, NULL); mysql_cond_init(key_relay_log_info_stop_cond, &stop_cond, NULL); mysql_cond_init(key_relay_log_info_log_space_cond, &log_space_cond, NULL); relay_log.init_pthread_objects(); DBUG_VOID_RETURN; } Relay_log_info::~Relay_log_info() { DBUG_ENTER("Relay_log_info::~Relay_log_info"); reset_inuse_relaylog(); mysql_mutex_destroy(&run_lock); mysql_mutex_destroy(&data_lock); mysql_mutex_destroy(&log_space_lock); mysql_cond_destroy(&data_cond); mysql_cond_destroy(&start_cond); mysql_cond_destroy(&stop_cond); mysql_cond_destroy(&log_space_cond); relay_log.cleanup(); DBUG_VOID_RETURN; } /** Read the relay_log.info file. @param info_fname The name of the file to read from. @retval 0 success @retval 1 failure */ int Relay_log_info::init(const char* info_fname) { char fname[FN_REFLEN+128]; const char* msg = 0; int error = 0; mysql_mutex_t *log_lock; DBUG_ENTER("Relay_log_info::init"); if (inited) // Set if this function called DBUG_RETURN(0); log_lock= relay_log.get_log_lock(); fn_format(fname, info_fname, mysql_data_home, "", 4+32); mysql_mutex_lock(&data_lock); cur_log_fd = -1; slave_skip_counter=0; abort_pos_wait=0; log_space_limit= relay_log_space_limit; log_space_total= 0; if (unlikely(error_on_rli_init_info)) goto err; char pattern[FN_REFLEN]; (void) my_realpath(pattern, slave_load_tmpdir, 0); if (fn_format(pattern, PREFIX_SQL_LOAD, pattern, "", MY_SAFE_PATH | MY_RETURN_REAL_PATH) == NullS) { mysql_mutex_unlock(&data_lock); sql_print_error("Unable to use slave's temporary directory %s", slave_load_tmpdir); DBUG_RETURN(1); } unpack_filename(slave_patternload_file, pattern); slave_patternload_file_size= strlen(slave_patternload_file); /* The relay log will now be opened, as a SEQ_READ_APPEND IO_CACHE. Note that the I/O thread flushes it to disk after writing every event, in flush_master_info(mi, 1, ?). */ { /* Reports an error and returns, if the --relay-log's path is a directory.*/ if (opt_relay_logname && opt_relay_logname[strlen(opt_relay_logname) - 1] == FN_LIBCHAR) { mysql_mutex_unlock(&data_lock); sql_print_error("Path '%s' is a directory name, please specify \ a file name for --relay-log option", opt_relay_logname); DBUG_RETURN(1); } /* Reports an error and returns, if the --relay-log-index's path is a directory.*/ if (opt_relaylog_index_name && opt_relaylog_index_name[strlen(opt_relaylog_index_name) - 1] == FN_LIBCHAR) { mysql_mutex_unlock(&data_lock); sql_print_error("Path '%s' is a directory name, please specify \ a file name for --relay-log-index option", opt_relaylog_index_name); DBUG_RETURN(1); } char buf[FN_REFLEN]; const char *ln; static bool name_warning_sent= 0; ln= relay_log.generate_name(opt_relay_logname, "-relay-bin", 1, buf); /* We send the warning only at startup, not after every RESET SLAVE */ if (!opt_relay_logname && !opt_relaylog_index_name && !name_warning_sent && !opt_bootstrap) { /* User didn't give us info to name the relay log index file. Picking `hostname`-relay-bin.index like we do, causes replication to fail if this slave's hostname is changed later. So, we would like to instead require a name. But as we don't want to break many existing setups, we only give warning, not error. */ sql_print_warning("Neither --relay-log nor --relay-log-index were used;" " so replication " "may break when this MariaDB server acts as a " "replica and has its hostname changed. Please " "use '--log-basename=#' or '--relay-log=%s' to avoid " "this problem.", ln); name_warning_sent= 1; } /* For multimaster, add connection name to relay log filenames */ char buf_relay_logname[FN_REFLEN], buf_relaylog_index_name_buff[FN_REFLEN]; char *buf_relaylog_index_name= opt_relaylog_index_name; create_logfile_name_with_suffix(buf_relay_logname, sizeof(buf_relay_logname), ln, 1, &mi->cmp_connection_name); ln= buf_relay_logname; if (opt_relaylog_index_name) { buf_relaylog_index_name= buf_relaylog_index_name_buff; create_logfile_name_with_suffix(buf_relaylog_index_name_buff, sizeof(buf_relaylog_index_name_buff), opt_relaylog_index_name, 0, &mi->cmp_connection_name); } /* note, that if open() fails, we'll still have index file open but a destructor will take care of that */ mysql_mutex_lock(log_lock); if (relay_log.open_index_file(buf_relaylog_index_name, ln, TRUE) || relay_log.open(ln, 0, 0, SEQ_READ_APPEND, (ulong)max_relay_log_size, 1, TRUE)) { mysql_mutex_unlock(log_lock); mysql_mutex_unlock(&data_lock); sql_print_error("Failed when trying to open logs for '%s' in Relay_log_info::init(). Error: %M", ln, my_errno); DBUG_RETURN(1); } mysql_mutex_unlock(log_lock); } /* if file does not exist */ if (access(fname,F_OK)) { /* If someone removed the file from underneath our feet, just close the old descriptor and re-create the old file */ if (info_fd >= 0) mysql_file_close(info_fd, MYF(MY_WME)); if ((info_fd= mysql_file_open(key_file_relay_log_info, fname, O_CREAT|O_RDWR|O_BINARY, MYF(MY_WME))) < 0) { sql_print_error("Failed to create a new relay log info file (" "file '%s', errno %d)", fname, my_errno); msg= current_thd->get_stmt_da()->message(); goto err; } if (init_io_cache(&info_file, info_fd, LOG_BIN_IO_SIZE, READ_CACHE, 0L,0, MYF(MY_WME))) { sql_print_error("Failed to create a cache on relay log info file '%s'", fname); msg= current_thd->get_stmt_da()->message(); goto err; } /* Init relay log with first entry in the relay index file */ if (init_relay_log_pos(this,NullS,BIN_LOG_HEADER_SIZE,0 /* no data lock */, &msg, 0)) { sql_print_error("Failed to open the relay log 'FIRST' (relay_log_pos 4)"); goto err; } group_master_log_name[0]= 0; group_master_log_pos= 0; } else // file exists { if (info_fd >= 0) reinit_io_cache(&info_file, READ_CACHE, 0L,0,0); else { int error=0; if ((info_fd= mysql_file_open(key_file_relay_log_info, fname, O_RDWR|O_BINARY, MYF(MY_WME))) < 0) { sql_print_error("\ Failed to open the existing relay log info file '%s' (errno %d)", fname, my_errno); error= 1; } else if (init_io_cache(&info_file, info_fd, LOG_BIN_IO_SIZE, READ_CACHE, 0L, 0, MYF(MY_WME))) { sql_print_error("Failed to create a cache on relay log info file '%s'", fname); error= 1; } if (unlikely(error)) { if (info_fd >= 0) mysql_file_close(info_fd, MYF(0)); info_fd= -1; mysql_mutex_lock(log_lock); relay_log.close(LOG_CLOSE_INDEX | LOG_CLOSE_STOP_EVENT); mysql_mutex_unlock(log_lock); mysql_mutex_unlock(&data_lock); DBUG_RETURN(1); } } int relay_log_pos, master_log_pos, lines; char *first_non_digit; /* Starting from MySQL 5.6.x, relay-log.info has a new format. Now, its first line contains the number of lines in the file. By reading this number we can determine which version our master.info comes from. We can't simply count the lines in the file, since versions before 5.6.x could generate files with more lines than needed. If first line doesn't contain a number, or if it contains a number less than LINES_IN_RELAY_LOG_INFO_WITH_DELAY, then the file is treated like a file from pre-5.6.x version. There is no ambiguity when reading an old master.info: before 5.6.x, the first line contained the binlog's name, which is either empty or has an extension (contains a '.'), so can't be confused with an integer. So we're just reading first line and trying to figure which version is this. */ /* The first row is temporarily stored in mi->master_log_name, if it is line count and not binlog name (new format) it will be overwritten by the second row later. */ if (init_strvar_from_file(group_relay_log_name, sizeof(group_relay_log_name), &info_file, "")) { msg="Error reading slave log configuration"; goto err; } lines= strtoul(group_relay_log_name, &first_non_digit, 10); if (group_relay_log_name[0] != '\0' && *first_non_digit == '\0' && lines >= LINES_IN_RELAY_LOG_INFO_WITH_DELAY) { DBUG_PRINT("info", ("relay_log_info file is in new format.")); /* Seems to be new format => read relay log name from next line */ if (init_strvar_from_file(group_relay_log_name, sizeof(group_relay_log_name), &info_file, "")) { msg="Error reading slave log configuration"; goto err; } } else DBUG_PRINT("info", ("relay_log_info file is in old format.")); if (init_intvar_from_file(&relay_log_pos, &info_file, BIN_LOG_HEADER_SIZE) || init_strvar_from_file(group_master_log_name, sizeof(group_master_log_name), &info_file, "") || init_intvar_from_file(&master_log_pos, &info_file, 0) || (lines >= LINES_IN_RELAY_LOG_INFO_WITH_DELAY && init_intvar_from_file(&sql_delay, &info_file, 0))) { msg="Error reading slave log configuration"; goto err; } strmake_buf(event_relay_log_name,group_relay_log_name); group_relay_log_pos= event_relay_log_pos= relay_log_pos; group_master_log_pos= master_log_pos; if (is_relay_log_recovery && init_recovery(mi, &msg)) goto err; relay_log_state.load(rpl_global_gtid_slave_state); if (init_relay_log_pos(this, group_relay_log_name, group_relay_log_pos, 0 /* no data lock*/, &msg, 0)) { sql_print_error("Failed to open the relay log '%s' (relay_log_pos %llu)", group_relay_log_name, group_relay_log_pos); goto err; } } DBUG_PRINT("info", ("my_b_tell(cur_log)=%llu event_relay_log_pos=%llu", my_b_tell(cur_log), event_relay_log_pos)); DBUG_ASSERT(event_relay_log_pos >= BIN_LOG_HEADER_SIZE); DBUG_ASSERT(my_b_tell(cur_log) == event_relay_log_pos); /* Now change the cache from READ to WRITE - must do this before Relay_log_info::flush() */ reinit_io_cache(&info_file, WRITE_CACHE,0L,0,1); if (unlikely((error= flush()))) { msg= "Failed to flush relay log info file"; goto err; } if (count_relay_log_space(this)) { msg="Error counting relay log space"; goto err; } inited= 1; error_on_rli_init_info= false; mysql_mutex_unlock(&data_lock); DBUG_RETURN(0); err: error_on_rli_init_info= true; if (msg) sql_print_error("%s", msg); end_io_cache(&info_file); if (info_fd >= 0) mysql_file_close(info_fd, MYF(0)); info_fd= -1; mysql_mutex_lock(log_lock); relay_log.close(LOG_CLOSE_INDEX | LOG_CLOSE_STOP_EVENT); mysql_mutex_unlock(log_lock); mysql_mutex_unlock(&data_lock); DBUG_RETURN(1); } static inline int add_relay_log(Relay_log_info* rli,LOG_INFO* linfo) { MY_STAT s; DBUG_ENTER("add_relay_log"); if (!mysql_file_stat(key_file_relaylog, linfo->log_file_name, &s, MYF(0))) { sql_print_error("log %s listed in the index, but failed to stat", linfo->log_file_name); DBUG_RETURN(1); } rli->log_space_total += s.st_size; DBUG_PRINT("info",("log_space_total: %llu", uint64(rli->log_space_total))); DBUG_RETURN(0); } static int count_relay_log_space(Relay_log_info* rli) { LOG_INFO linfo; DBUG_ENTER("count_relay_log_space"); rli->log_space_total= 0; if (rli->relay_log.find_log_pos(&linfo, NullS, 1)) { sql_print_error("Could not find first log while counting relay log space"); DBUG_RETURN(1); } do { if (add_relay_log(rli,&linfo)) DBUG_RETURN(1); } while (!rli->relay_log.find_next_log(&linfo, 1)); /* As we have counted everything, including what may have written in a preceding write, we must reset bytes_written, or we may count some space twice. */ rli->relay_log.reset_bytes_written(); DBUG_RETURN(0); } /* Reset UNTIL condition for Relay_log_info SYNOPSYS clear_until_condition() rli - Relay_log_info structure where UNTIL condition should be reset */ void Relay_log_info::clear_until_condition() { DBUG_ENTER("clear_until_condition"); until_condition= Relay_log_info::UNTIL_NONE; until_log_name[0]= 0; until_log_pos= 0; until_relay_log_names_defer= false; DBUG_VOID_RETURN; } /* Read the correct format description event for starting to replicate from a given position in a relay log file. */ Format_description_log_event * read_relay_log_description_event(IO_CACHE *cur_log, ulonglong start_pos, const char **errmsg) { Log_event *ev; Format_description_log_event *fdev; bool found= false; fdev= new Format_description_log_event(4); while (!found) { Log_event_type typ; /* Read the possible Format_description_log_event; if position was 4, no need, it will be read naturally. */ DBUG_PRINT("info",("looking for a Format_description_log_event")); if (my_b_tell(cur_log) >= start_pos) break; if (!(ev= Log_event::read_log_event(cur_log, fdev, opt_slave_sql_verify_checksum))) { DBUG_PRINT("info",("could not read event, cur_log->error=%d", cur_log->error)); if (cur_log->error) /* not EOF */ { *errmsg= "I/O error reading event at position 4"; delete fdev; return NULL; } break; } typ= ev->get_type_code(); if (typ == FORMAT_DESCRIPTION_EVENT) { Format_description_log_event *old= fdev; DBUG_PRINT("info",("found Format_description_log_event")); fdev= (Format_description_log_event*) ev; fdev->copy_crypto_data(old); delete old; /* As ev was returned by read_log_event, it has passed is_valid(), so my_malloc() in ctor worked, no need to check again. */ /* Ok, we found a Format_description event. But it is not sure that this describes the whole relay log; indeed, one can have this sequence (starting from position 4): Format_desc (of slave) Rotate (of master) Format_desc (of master) So the Format_desc which really describes the rest of the relay log is the 3rd event (it can't be further than that, because we rotate the relay log when we queue a Rotate event from the master). But what describes the Rotate is the first Format_desc. So what we do is: go on searching for Format_description events, until you exceed the position (argument 'pos') or until you find another event than Rotate or Format_desc. */ } else if (typ == START_ENCRYPTION_EVENT) { if (fdev->start_decryption((Start_encryption_log_event*) ev)) { *errmsg= "Unable to set up decryption of binlog."; delete ev; delete fdev; return NULL; } delete ev; } else { DBUG_PRINT("info",("found event of another type=%d", typ)); found= (typ != ROTATE_EVENT); delete ev; } } return fdev; } /* Open the given relay log SYNOPSIS init_relay_log_pos() rli Relay information (will be initialized) log Name of relay log file to read from. NULL = First log pos Position in relay log file need_data_lock Set to 1 if this functions should do mutex locks errmsg Store pointer to error message here look_for_description_event 1 if we should look for such an event. We only need this when the SQL thread starts and opens an existing relay log and has to execute it (possibly from an offset >4); then we need to read the first event of the relay log to be able to parse the events we have to execute. DESCRIPTION - Close old open relay log files. - If we are using the same relay log as the running IO-thread, then set rli->cur_log to point to the same IO_CACHE entry. - If not, open the 'log' binary file. TODO - check proper initialization of group_master_log_name/group_master_log_pos RETURN VALUES 0 ok 1 error. errmsg is set to point to the error message */ int init_relay_log_pos(Relay_log_info* rli,const char* log, ulonglong pos, bool need_data_lock, const char** errmsg, bool look_for_description_event) { DBUG_ENTER("init_relay_log_pos"); DBUG_PRINT("info", ("pos: %lu", (ulong) pos)); *errmsg=0; mysql_mutex_t *log_lock= rli->relay_log.get_log_lock(); if (need_data_lock) mysql_mutex_lock(&rli->data_lock); /* Slave threads are not the only users of init_relay_log_pos(). CHANGE MASTER is, too, and init_slave() too; these 2 functions allocate a description event in init_relay_log_pos, which is not freed by the terminating SQL slave thread as that thread is not started by these functions. So we have to free the description_event here, in case, so that there is no memory leak in running, say, CHANGE MASTER. */ delete rli->relay_log.description_event_for_exec; rli->relay_log.description_event_for_exec= new Format_description_log_event(4); mysql_mutex_lock(log_lock); /* Close log file and free buffers if it's already open */ if (rli->cur_log_fd >= 0) { end_io_cache(&rli->cache_buf); mysql_file_close(rli->cur_log_fd, MYF(MY_WME)); rli->cur_log_fd = -1; } rli->group_relay_log_pos = rli->event_relay_log_pos = pos; rli->clear_flag(Relay_log_info::IN_STMT); rli->clear_flag(Relay_log_info::IN_TRANSACTION); /* Test to see if the previous run was with the skip of purging If yes, we do not purge when we restart */ if (rli->relay_log.find_log_pos(&rli->linfo, NullS, 1)) { *errmsg="Could not find first log during relay log initialization"; goto err; } if (log && rli->relay_log.find_log_pos(&rli->linfo, log, 1)) { *errmsg="Could not find target log during relay log initialization"; goto err; } strmake_buf(rli->group_relay_log_name,rli->linfo.log_file_name); strmake_buf(rli->event_relay_log_name,rli->linfo.log_file_name); if (rli->relay_log.is_active(rli->linfo.log_file_name)) { /* The IO thread is using this log file. In this case, we will use the same IO_CACHE pointer to read data as the IO thread is using to write data. */ my_b_seek((rli->cur_log=rli->relay_log.get_log_file()), (off_t)0); if (check_binlog_magic(rli->cur_log,errmsg)) goto err; rli->cur_log_old_open_count=rli->relay_log.get_open_count(); } else { /* Open the relay log and set rli->cur_log to point at this one */ if ((rli->cur_log_fd=open_binlog(&rli->cache_buf, rli->linfo.log_file_name,errmsg)) < 0) goto err; rli->cur_log = &rli->cache_buf; } /* In all cases, check_binlog_magic() has been called so we're at offset 4 for sure. */ if (pos > BIN_LOG_HEADER_SIZE) /* If pos<=4, we stay at 4 */ { if (look_for_description_event) { Format_description_log_event *fdev; if (!(fdev= read_relay_log_description_event(rli->cur_log, pos, errmsg))) goto err; delete rli->relay_log.description_event_for_exec; rli->relay_log.description_event_for_exec= fdev; } my_b_seek(rli->cur_log,(off_t)pos); DBUG_PRINT("info", ("my_b_tell(rli->cur_log)=%llu rli->event_relay_log_pos=%llu", my_b_tell(rli->cur_log), rli->event_relay_log_pos)); } err: /* If we don't purge, we can't honour relay_log_space_limit ; silently discard it */ if (!relay_log_purge) rli->log_space_limit= 0; mysql_cond_broadcast(&rli->data_cond); mysql_mutex_unlock(log_lock); if (need_data_lock) mysql_mutex_unlock(&rli->data_lock); if (!rli->relay_log.description_event_for_exec->is_valid() && !*errmsg) *errmsg= "Invalid Format_description log event; could be out of memory"; DBUG_PRINT("info", ("Returning %d from init_relay_log_pos", (*errmsg)?1:0)); DBUG_RETURN ((*errmsg) ? 1 : 0); } /* Waits until the SQL thread reaches (has executed up to) the log/position or timed out. SYNOPSIS wait_for_pos() thd client thread that sent SELECT MASTER_POS_WAIT log_name log name to wait for log_pos position to wait for timeout timeout in seconds before giving up waiting NOTES timeout is longlong whereas it should be ulong ; but this is to catch if the user submitted a negative timeout. RETURN VALUES -2 improper arguments (log_pos<0) or slave not running, or master info changed during the function's execution, or client thread killed. -2 is translated to NULL by caller -1 timed out >=0 number of log events the function had to wait before reaching the desired log/position */ int Relay_log_info::wait_for_pos(THD* thd, String* log_name, longlong log_pos, longlong timeout) { int event_count = 0; ulong init_abort_pos_wait; int error=0; struct timespec abstime; // for timeout checking PSI_stage_info old_stage; DBUG_ENTER("Relay_log_info::wait_for_pos"); if (!inited) DBUG_RETURN(-2); DBUG_PRINT("enter",("log_name: '%s' log_pos: %lu timeout: %lu", log_name->c_ptr(), (ulong) log_pos, (ulong) timeout)); set_timespec(abstime,timeout); mysql_mutex_lock(&data_lock); thd->ENTER_COND(&data_cond, &data_lock, &stage_waiting_for_the_slave_thread_to_advance_position, &old_stage); /* This function will abort when it notices that some CHANGE MASTER or RESET MASTER has changed the master info. To catch this, these commands modify abort_pos_wait ; We just monitor abort_pos_wait and see if it has changed. Why do we have this mechanism instead of simply monitoring slave_running in the loop (we do this too), as CHANGE MASTER/RESET SLAVE require that the SQL thread be stopped? This is becasue if someones does: STOP SLAVE;CHANGE MASTER/RESET SLAVE; START SLAVE; the change may happen very quickly and we may not notice that slave_running briefly switches between 1/0/1. */ init_abort_pos_wait= abort_pos_wait; /* We'll need to handle all possible log names comparisons (e.g. 999 vs 1000). We use ulong for string->number conversion ; this is no stronger limitation than in find_uniq_filename in sql/log.cc */ ulong log_name_extension; char log_name_tmp[FN_REFLEN]; //make a char[] from String strmake(log_name_tmp, log_name->ptr(), MY_MIN(log_name->length(), FN_REFLEN-1)); char *p= fn_ext(log_name_tmp); char *p_end; if (!*p || log_pos<0) { error= -2; //means improper arguments goto err; } // Convert 0-3 to 4 log_pos= MY_MAX(log_pos, BIN_LOG_HEADER_SIZE); /* p points to '.' */ log_name_extension= strtoul(++p, &p_end, 10); /* p_end points to the first invalid character. If it equals to p, no digits were found, error. If it contains '\0' it means conversion went ok. */ if (p_end==p || *p_end) { error= -2; goto err; } /* The "compare and wait" main loop */ while (!thd->killed && init_abort_pos_wait == abort_pos_wait && slave_running) { bool pos_reached; int cmp_result= 0; DBUG_PRINT("info", ("init_abort_pos_wait: %ld abort_pos_wait: %ld", init_abort_pos_wait, abort_pos_wait)); DBUG_PRINT("info",("group_master_log_name: '%s' pos: %lu", group_master_log_name, (ulong) group_master_log_pos)); /* group_master_log_name can be "", if we are just after a fresh replication start or after a CHANGE MASTER TO MASTER_HOST/PORT (before we have executed one Rotate event from the master) or (rare) if the user is doing a weird slave setup (see next paragraph). If group_master_log_name is "", we assume we don't have enough info to do the comparison yet, so we just wait until more data. In this case master_log_pos is always 0 except if somebody (wrongly) sets this slave to be a slave of itself without using --replicate-same-server-id (an unsupported configuration which does nothing), then group_master_log_pos will grow and group_master_log_name will stay "". */ if (*group_master_log_name) { char *basename= (group_master_log_name + dirname_length(group_master_log_name)); /* First compare the parts before the extension. Find the dot in the master's log basename, and protect against user's input error : if the names do not match up to '.' included, return error */ char *q= (char*)(fn_ext(basename)+1); if (strncmp(basename, log_name_tmp, (int)(q-basename))) { error= -2; break; } // Now compare extensions. char *q_end; ulong group_master_log_name_extension= strtoul(q, &q_end, 10); if (group_master_log_name_extension < log_name_extension) cmp_result= -1 ; else cmp_result= (group_master_log_name_extension > log_name_extension) ? 1 : 0 ; pos_reached= ((!cmp_result && group_master_log_pos >= (ulonglong)log_pos) || cmp_result > 0); if (pos_reached || thd->killed) break; } //wait for master update, with optional timeout. DBUG_PRINT("info",("Waiting for master update")); /* We are going to mysql_cond_(timed)wait(); if the SQL thread stops it will wake us up. */ thd_wait_begin(thd, THD_WAIT_BINLOG); if (timeout > 0) { /* Note that mysql_cond_timedwait checks for the timeout before for the condition ; i.e. it returns ETIMEDOUT if the system time equals or exceeds the time specified by abstime before the condition variable is signaled or broadcast, _or_ if the absolute time specified by abstime has already passed at the time of the call. For that reason, mysql_cond_timedwait will do the "timeoutting" job even if its condition is always immediately signaled (case of a loaded master). */ error= mysql_cond_timedwait(&data_cond, &data_lock, &abstime); } else mysql_cond_wait(&data_cond, &data_lock); thd_wait_end(thd); DBUG_PRINT("info",("Got signal of master update or timed out")); if (error == ETIMEDOUT || error == ETIME) { error= -1; break; } error=0; event_count++; DBUG_PRINT("info",("Testing if killed or SQL thread not running")); } err: thd->EXIT_COND(&old_stage); DBUG_PRINT("exit",("killed: %d abort: %d slave_running: %d \ improper_arguments: %d timed_out: %d", thd->killed_errno(), (int) (init_abort_pos_wait != abort_pos_wait), (int) slave_running, (int) (error == -2), (int) (error == -1))); if (thd->killed || init_abort_pos_wait != abort_pos_wait || !slave_running) { error= -2; } DBUG_RETURN( error ? error : event_count ); } void Relay_log_info::inc_group_relay_log_pos(ulonglong log_pos, rpl_group_info *rgi, bool skip_lock) { DBUG_ENTER("Relay_log_info::inc_group_relay_log_pos"); if (skip_lock) mysql_mutex_assert_owner(&data_lock); else mysql_mutex_lock(&data_lock); rgi->inc_event_relay_log_pos(); DBUG_PRINT("info", ("log_pos: %lu group_master_log_pos: %lu", (long) log_pos, (long) group_master_log_pos)); if (rgi->is_parallel_exec) { /* In case of parallel replication, do not update the position backwards. */ int cmp= compare_log_name(group_relay_log_name, rgi->event_relay_log_name); if (cmp < 0) { group_relay_log_pos= rgi->future_event_relay_log_pos; strmake_buf(group_relay_log_name, rgi->event_relay_log_name); } else if (cmp == 0 && group_relay_log_pos < rgi->future_event_relay_log_pos) group_relay_log_pos= rgi->future_event_relay_log_pos; /* In the parallel case we need to update the master_log_name here, rather than in Rotate_log_event::do_update_pos(). */ cmp= compare_log_name(group_master_log_name, rgi->future_event_master_log_name); if (cmp <= 0) { if (cmp < 0) { strcpy(group_master_log_name, rgi->future_event_master_log_name); group_master_log_pos= log_pos; } else if (group_master_log_pos < log_pos) group_master_log_pos= log_pos; } /* In the parallel case, we only update the Seconds_Behind_Master at the end of a transaction. In the non-parallel case, the value is updated as soon as an event is read from the relay log; however this would be too confusing for the user, seeing the slave reported as up-to-date when potentially thousands of events are still queued up for worker threads waiting for execution. */ if (rgi->last_master_timestamp && rgi->last_master_timestamp > last_master_timestamp) last_master_timestamp= rgi->last_master_timestamp; } else { /* Non-parallel case. */ group_relay_log_pos= event_relay_log_pos; strmake_buf(group_relay_log_name, event_relay_log_name); notify_group_relay_log_name_update(); if (log_pos) // not 3.23 binlogs (no log_pos there) and not Stop_log_event group_master_log_pos= log_pos; } /* If the slave does not support transactions and replicates a transaction, users should not trust group_master_log_pos (which they can display with SHOW SLAVE STATUS or read from relay-log.info), because to compute group_master_log_pos the slave relies on log_pos stored in the master's binlog, but if we are in a master's transaction these positions are always the BEGIN's one (excepted for the COMMIT), so group_master_log_pos does not advance as it should on the non-transactional slave (it advances by big leaps, whereas it should advance by small leaps). */ /* In 4.x we used the event's len to compute the positions here. This is wrong if the event was 3.23/4.0 and has been converted to 5.0, because then the event's len is not what is was in the master's binlog, so this will make a wrong group_master_log_pos (yes it's a bug in 3.23->4.0 replication: Exec_master_log_pos is wrong). Only way to solve this is to have the original offset of the end of the event the relay log. This is what we do in 5.0: log_pos has become "end_log_pos" (because the real use of log_pos in 4.0 was to compute the end_log_pos; so better to store end_log_pos instead of begin_log_pos. If we had not done this fix here, the problem would also have appeared when the slave and master are 5.0 but with different event length (for example the slave is more recent than the master and features the event UID). It would give false MASTER_POS_WAIT, false Exec_master_log_pos in SHOW SLAVE STATUS, and so the user would do some CHANGE MASTER using this value which would lead to badly broken replication. Even the relay_log_pos will be corrupted in this case, because the len is the relay log is not "val". With the end_log_pos solution, we avoid computations involving lengthes. */ mysql_cond_broadcast(&data_cond); if (!skip_lock) mysql_mutex_unlock(&data_lock); DBUG_VOID_RETURN; } void Relay_log_info::close_temporary_tables() { DBUG_ENTER("Relay_log_info::close_temporary_tables"); TMP_TABLE_SHARE *share; TABLE *table; if (!save_temporary_tables) { /* There are no temporary tables. */ DBUG_VOID_RETURN; } while ((share= save_temporary_tables->pop_front())) { /* Iterate over the list of tables for this TABLE_SHARE and close them. */ while ((table= share->all_tmp_tables.pop_front())) { DBUG_PRINT("tmptable", ("closing table: '%s'.'%s'", table->s->db.str, table->s->table_name.str)); /* Reset in_use as the table may have been created by another thd */ table->in_use= 0; /* Lets not free TABLE_SHARE here as there could be multiple TABLEs opened for the same table (TABLE_SHARE). */ closefrm(table); my_free(table); } /* Don't ask for disk deletion. For now, anyway they will be deleted when slave restarts, but it is a better intention to not delete them. */ free_table_share(share); my_free(share); } /* By now, there mustn't be any elements left in the list. */ DBUG_ASSERT(save_temporary_tables->is_empty()); my_free(save_temporary_tables); save_temporary_tables= NULL; slave_open_temp_tables= 0; DBUG_VOID_RETURN; } /* purge_relay_logs() @param rli Relay log information @param thd thread id. May be zero during startup NOTES Assumes to have a run lock on rli and that no slave thread are running. */ int purge_relay_logs(Relay_log_info* rli, THD *thd, bool just_reset, const char** errmsg) { int error=0; const char *ln; char name_buf[FN_REFLEN]; DBUG_ENTER("purge_relay_logs"); /* Even if rli->inited==0, we still try to empty rli->master_log_* variables. Indeed, rli->inited==0 does not imply that they already are empty. It could be that slave's info initialization partly succeeded : for example if relay-log.info existed but *relay-bin*.* have been manually removed, Relay_log_info::init() reads the old relay-log.info and fills rli->master_log_*, then Relay_log_info::init() checks for the existence of the relay log, this fails and Relay_log_info::init() leaves rli->inited to 0. In that pathological case, rli->master_log_pos* will be properly reinited at the next START SLAVE (as RESET SLAVE or CHANGE MASTER, the callers of purge_relay_logs, will delete bogus *.info files or replace them with correct files), however if the user does SHOW SLAVE STATUS before START SLAVE, he will see old, confusing rli->master_log_*. In other words, we reinit rli->master_log_* for SHOW SLAVE STATUS to display fine in any case. */ rli->group_master_log_name[0]= 0; rli->group_master_log_pos= 0; if (!rli->inited) { DBUG_PRINT("info", ("rli->inited == 0")); if (rli->error_on_rli_init_info) { ln= rli->relay_log.generate_name(opt_relay_logname, "-relay-bin", 1, name_buf); if (rli->relay_log.open_index_file(opt_relaylog_index_name, ln, TRUE)) { sql_print_error("Unable to purge relay log files. Failed to open relay " "log index file:%s.", rli->relay_log.get_index_fname()); DBUG_RETURN(1); } mysql_mutex_lock(rli->relay_log.get_log_lock()); if (rli->relay_log.open(ln, 0, 0, SEQ_READ_APPEND, (ulong)(rli->max_relay_log_size ? rli->max_relay_log_size : max_binlog_size), 1, TRUE)) { sql_print_error("Unable to purge relay log files. Failed to open relay " "log file:%s.", rli->relay_log.get_log_fname()); mysql_mutex_unlock(rli->relay_log.get_log_lock()); DBUG_RETURN(1); } mysql_mutex_unlock(rli->relay_log.get_log_lock()); } else DBUG_RETURN(0); } else { DBUG_ASSERT(rli->slave_running == 0); DBUG_ASSERT(rli->mi->slave_running == 0); } mysql_mutex_lock(&rli->data_lock); /* we close the relay log fd possibly left open by the slave SQL thread, to be able to delete it; the relay log fd possibly left open by the slave I/O thread will be closed naturally in reset_logs() by the close(LOG_CLOSE_TO_BE_OPENED) call */ if (rli->cur_log_fd >= 0) { end_io_cache(&rli->cache_buf); mysql_file_close(rli->cur_log_fd, MYF(MY_WME)); rli->cur_log_fd= -1; } if (rli->relay_log.reset_logs(thd, !just_reset, NULL, 0, 0)) { *errmsg = "Failed during log reset"; error=1; goto err; } rli->relay_log_state.load(rpl_global_gtid_slave_state); if (!just_reset) { /* Save name of used relay log file */ strmake_buf(rli->group_relay_log_name, rli->relay_log.get_log_fname()); strmake_buf(rli->event_relay_log_name, rli->relay_log.get_log_fname()); rli->group_relay_log_pos= rli->event_relay_log_pos= BIN_LOG_HEADER_SIZE; rli->log_space_total= 0; if (count_relay_log_space(rli)) { *errmsg= "Error counting relay log space"; error=1; goto err; } error= init_relay_log_pos(rli, rli->group_relay_log_name, rli->group_relay_log_pos, 0 /* do not need data lock */, errmsg, 0); } else { /* Ensure relay log names are not used */ rli->group_relay_log_name[0]= rli->event_relay_log_name[0]= 0; } if (!rli->inited && rli->error_on_rli_init_info) { mysql_mutex_lock(rli->relay_log.get_log_lock()); rli->relay_log.close(LOG_CLOSE_INDEX | LOG_CLOSE_STOP_EVENT); mysql_mutex_unlock(rli->relay_log.get_log_lock()); } err: DBUG_PRINT("info",("log_space_total: %llu", uint64(rli->log_space_total))); mysql_mutex_unlock(&rli->data_lock); DBUG_RETURN(error); } /* Check if condition stated in UNTIL clause of START SLAVE is reached. SYNOPSYS Relay_log_info::is_until_satisfied() master_beg_pos position of the beginning of to be executed event (not log_pos member of the event that points to the beginning of the following event) DESCRIPTION Checks if UNTIL condition is reached. Uses caching result of last comparison of current log file name and target log file name. So cached value should be invalidated if current log file name changes (see Relay_log_info::notify_... functions). This caching is needed to avoid of expensive string comparisons and strtol() conversions needed for log names comparison. We don't need to compare them each time this function is called, we only need to do this when current log name changes. If we have UNTIL_MASTER_POS condition we need to do this only after Rotate_log_event::do_apply_event() (which is rare, so caching gives real benifit), and if we have UNTIL_RELAY_POS condition then we should invalidate cached comarison value after inc_group_relay_log_pos() which called for each group of events (so we have some benefit if we have something like queries that use autoincrement or if we have transactions). Should be called ONLY if until_condition != UNTIL_NONE ! In the parallel execution mode and UNTIL_MASTER_POS the file name is presented by future_event_master_log_name which may be ahead of group_master_log_name. Log_event::log_pos does relate to it nevertheless so the pair comprises a correct binlog coordinate. Internal group events and events that have zero log_pos also produce the zero for the local log_pos which may not lead to the function falsely return true. In UNTIL_RELAY_POS the original caching and notification are simplified to straightforward files comparison when the current event can't be a part of an event group. RETURN VALUE true - condition met or error happened (condition seems to have bad log file name) false - condition not met */ bool Relay_log_info::is_until_satisfied(Log_event *ev) { const char *log_name; ulonglong log_pos; /* Prevents stopping within transaction; needed solely for Relay UNTIL. */ bool in_trans= false; DBUG_ENTER("Relay_log_info::is_until_satisfied"); if (until_condition == UNTIL_MASTER_POS) { log_name= (mi->using_parallel() ? future_event_master_log_name : group_master_log_name); log_pos= (get_flag(Relay_log_info::IN_TRANSACTION) || !ev || !ev->log_pos) ? (mi->using_parallel() ? 0 : group_master_log_pos) : ev->log_pos - ev->data_written; } else { DBUG_ASSERT(until_condition == UNTIL_RELAY_POS); if (!mi->using_parallel()) { log_name= group_relay_log_name; log_pos= group_relay_log_pos; } else { log_name= event_relay_log_name; log_pos= event_relay_log_pos; in_trans= get_flag(Relay_log_info::IN_TRANSACTION); /* until_log_names_cmp_result is set to UNKNOWN either - by a non-group event *and* only when it is in the middle of a group - or by a group event when the preceding group made the above non-group event to defer the resetting. */ if ((ev && !Log_event::is_group_event(ev->get_type_code()))) { if (in_trans) { until_relay_log_names_defer= true; } else { until_log_names_cmp_result= UNTIL_LOG_NAMES_CMP_UNKNOWN; until_relay_log_names_defer= false; } } else if (!in_trans && until_relay_log_names_defer) { until_log_names_cmp_result= UNTIL_LOG_NAMES_CMP_UNKNOWN; until_relay_log_names_defer= false; } } } DBUG_PRINT("info", ("group_master_log_name='%s', group_master_log_pos=%llu", group_master_log_name, group_master_log_pos)); DBUG_PRINT("info", ("group_relay_log_name='%s', group_relay_log_pos=%llu", group_relay_log_name, group_relay_log_pos)); DBUG_PRINT("info", ("(%s) log_name='%s', log_pos=%llu", until_condition == UNTIL_MASTER_POS ? "master" : "relay", log_name, log_pos)); DBUG_PRINT("info", ("(%s) until_log_name='%s', until_log_pos=%llu", until_condition == UNTIL_MASTER_POS ? "master" : "relay", until_log_name, until_log_pos)); if (until_log_names_cmp_result == UNTIL_LOG_NAMES_CMP_UNKNOWN) { /* We have no cached comparison results so we should compare log names and cache result. If we are after RESET SLAVE, and the SQL slave thread has not processed any event yet, it could be that group_master_log_name is "". In that case, just wait for more events (as there is no sensible comparison to do). */ if (*log_name) { const char *basename= log_name + dirname_length(log_name); const char *q= (const char*)(fn_ext(basename)+1); if (strncmp(basename, until_log_name, (int)(q-basename)) == 0) { /* Now compare extensions. */ char *q_end; ulong log_name_extension= strtoul(q, &q_end, 10); if (log_name_extension < until_log_name_extension) until_log_names_cmp_result= UNTIL_LOG_NAMES_CMP_LESS; else until_log_names_cmp_result= (log_name_extension > until_log_name_extension) ? UNTIL_LOG_NAMES_CMP_GREATER : UNTIL_LOG_NAMES_CMP_EQUAL ; } else { /* Probably error so we aborting */ sql_print_error("Slave SQL thread is stopped because UNTIL " "condition is bad."); DBUG_RETURN(TRUE); } } else DBUG_RETURN(until_log_pos == 0); } DBUG_RETURN(((until_log_names_cmp_result == UNTIL_LOG_NAMES_CMP_EQUAL && (log_pos >= until_log_pos && !in_trans)) || until_log_names_cmp_result == UNTIL_LOG_NAMES_CMP_GREATER)); } bool Relay_log_info::stmt_done(my_off_t event_master_log_pos, THD *thd, rpl_group_info *rgi) { int error= 0; DBUG_ENTER("Relay_log_info::stmt_done"); DBUG_ASSERT(!belongs_to_client()); DBUG_ASSERT(rgi->rli == this); /* If in a transaction, and if the slave supports transactions, just inc_event_relay_log_pos(). We only have to check for OPTION_BEGIN (not OPTION_NOT_AUTOCOMMIT) as transactions are logged with BEGIN/COMMIT, not with SET AUTOCOMMIT= . We can't use rgi->rli->get_flag(IN_TRANSACTION) here as OPTION_BEGIN is also used for single row transactions. CAUTION: opt_using_transactions means innodb || bdb ; suppose the master supports InnoDB and BDB, but the slave supports only BDB, problems will arise: - suppose an InnoDB table is created on the master, - then it will be MyISAM on the slave - but as opt_using_transactions is true, the slave will believe he is transactional with the MyISAM table. And problems will come when one does START SLAVE; STOP SLAVE; START SLAVE; (the slave will resume at BEGIN whereas there has not been any rollback). This is the problem of using opt_using_transactions instead of a finer "does the slave support _transactional handler used on the master_". More generally, we'll have problems when a query mixes a transactional handler and MyISAM and STOP SLAVE is issued in the middle of the "transaction". START SLAVE will resume at BEGIN while the MyISAM table has already been updated. */ if ((rgi->thd->variables.option_bits & OPTION_BEGIN) && opt_using_transactions) rgi->inc_event_relay_log_pos(); else { inc_group_relay_log_pos(event_master_log_pos, rgi); if (rpl_global_gtid_slave_state->record_and_update_gtid(thd, rgi)) { report(WARNING_LEVEL, ER_CANNOT_UPDATE_GTID_STATE, rgi->gtid_info(), "Failed to update GTID state in %s.%s, slave state may become " "inconsistent: %d: %s", "mysql", rpl_gtid_slave_state_table_name.str, thd->get_stmt_da()->sql_errno(), thd->get_stmt_da()->message()); /* At this point we are not in a transaction (for example after DDL), so we can not roll back. Anyway, normally updates to the slave state table should not fail, and if they do, at least we made the DBA aware of the problem in the error log. */ } DBUG_EXECUTE_IF("inject_crash_before_flush_rli", DBUG_SUICIDE();); if (mi->using_gtid == Master_info::USE_GTID_NO) { if (rgi->is_parallel_exec) mysql_mutex_lock(&data_lock); if (flush()) error= 1; if (rgi->is_parallel_exec) mysql_mutex_unlock(&data_lock); } DBUG_EXECUTE_IF("inject_crash_after_flush_rli", DBUG_SUICIDE();); } DBUG_RETURN(error); } int Relay_log_info::alloc_inuse_relaylog(const char *name) { inuse_relaylog *ir; uint32 gtid_count; rpl_gtid *gtid_list; gtid_count= relay_log_state.count(); if (!(gtid_list= (rpl_gtid *)my_malloc(PSI_INSTRUMENT_ME, sizeof(*gtid_list)*gtid_count, MYF(MY_WME)))) { my_error(ER_OUTOFMEMORY, MYF(0), (int)sizeof(*gtid_list)*gtid_count); return 1; } if (!(ir= new inuse_relaylog(this, gtid_list, gtid_count, name))) { my_free(gtid_list); my_error(ER_OUTOFMEMORY, MYF(0), (int) sizeof(*ir)); return 1; } if (relay_log_state.get_gtid_list(gtid_list, gtid_count)) { my_free(gtid_list); delete ir; DBUG_ASSERT(0 /* Should not be possible as we allocated correct length */); my_error(ER_OUT_OF_RESOURCES, MYF(0)); return 1; } if (!inuse_relaylog_list) inuse_relaylog_list= ir; else { last_inuse_relaylog->completed= true; last_inuse_relaylog->next= ir; } last_inuse_relaylog= ir; return 0; } void Relay_log_info::free_inuse_relaylog(inuse_relaylog *ir) { my_free(ir->relay_log_state); delete ir; } void Relay_log_info::reset_inuse_relaylog() { inuse_relaylog *cur= inuse_relaylog_list; while (cur) { DBUG_ASSERT(cur->queued_count == cur->dequeued_count); inuse_relaylog *next= cur->next; free_inuse_relaylog(cur); cur= next; } inuse_relaylog_list= last_inuse_relaylog= NULL; } int Relay_log_info::update_relay_log_state(rpl_gtid *gtid_list, uint32 count) { int res= 0; while (count) { if (relay_log_state.update_nolock(gtid_list)) res= 1; ++gtid_list; --count; } return res; } #if !defined(MYSQL_CLIENT) && defined(HAVE_REPLICATION) struct gtid_pos_element { uint64 sub_id; rpl_gtid gtid; void *hton; }; static int scan_one_gtid_slave_pos_table(THD *thd, HASH *hash, DYNAMIC_ARRAY *array, LEX_CSTRING *tablename, void **out_hton) { TABLE_LIST tlist; TABLE *UNINIT_VAR(table); bool table_opened= false; bool table_scanned= false; struct gtid_pos_element tmp_entry, *entry; int err= 0; thd->reset_for_next_command(); tlist.init_one_table(&MYSQL_SCHEMA_NAME, tablename, NULL, TL_READ); if ((err= open_and_lock_tables(thd, &tlist, FALSE, 0))) goto end; table_opened= true; table= tlist.table; if ((err= gtid_check_rpl_slave_state_table(table))) goto end; bitmap_set_all(table->read_set); if (unlikely(err= table->file->ha_rnd_init_with_error(1))) goto end; table_scanned= true; for (;;) { uint32 domain_id, server_id; uint64 sub_id, seq_no; uchar *rec; if ((err= table->file->ha_rnd_next(table->record[0]))) { if (err == HA_ERR_END_OF_FILE) break; else { table->file->print_error(err, MYF(0)); goto end; } } domain_id= (uint32)table->field[0]->val_int(); sub_id= (ulonglong)table->field[1]->val_int(); server_id= (uint32)table->field[2]->val_int(); seq_no= (ulonglong)table->field[3]->val_int(); DBUG_PRINT("info", ("Read slave state row: %u-%u-%lu sub_id=%lu", (unsigned)domain_id, (unsigned)server_id, (ulong)seq_no, (ulong)sub_id)); tmp_entry.sub_id= sub_id; tmp_entry.gtid.domain_id= domain_id; tmp_entry.gtid.server_id= server_id; tmp_entry.gtid.seq_no= seq_no; tmp_entry.hton= table->s->db_type(); if ((err= insert_dynamic(array, (uchar *)&tmp_entry))) { my_error(ER_OUT_OF_RESOURCES, MYF(0)); goto end; } if ((rec= my_hash_search(hash, (const uchar *)&domain_id, sizeof(domain_id)))) { entry= (struct gtid_pos_element *)rec; if (entry->sub_id >= sub_id) continue; entry->sub_id= sub_id; DBUG_ASSERT(entry->gtid.domain_id == domain_id); entry->gtid.server_id= server_id; entry->gtid.seq_no= seq_no; entry->hton= table->s->db_type(); } else { if (!(entry= (struct gtid_pos_element *)my_malloc(PSI_INSTRUMENT_ME, sizeof(*entry), MYF(MY_WME)))) { my_error(ER_OUTOFMEMORY, MYF(0), (int)sizeof(*entry)); err= 1; goto end; } entry->sub_id= sub_id; entry->gtid.domain_id= domain_id; entry->gtid.server_id= server_id; entry->gtid.seq_no= seq_no; entry->hton= table->s->db_type(); if ((err= my_hash_insert(hash, (uchar *)entry))) { my_free(entry); my_error(ER_OUT_OF_RESOURCES, MYF(0)); goto end; } } } err= 0; /* Clear HA_ERR_END_OF_FILE */ end: if (table_scanned) { table->file->ha_index_or_rnd_end(); ha_commit_trans(thd, FALSE); trans_commit(thd); } if (table_opened) { *out_hton= table->s->db_type(); close_thread_tables(thd); thd->release_transactional_locks(); } return err; } /* Look for all tables mysql.gtid_slave_pos*. Read all rows from each such table found into ARRAY. For each domain id, put the row with highest sub_id into HASH. */ static int scan_all_gtid_slave_pos_table(THD *thd, int (*cb)(THD *, LEX_CSTRING *, void *), void *cb_data) { char path[FN_REFLEN]; MY_DIR *dirp; thd->reset_for_next_command(); if (lock_schema_name(thd, Lex_ident_db_normalized(MYSQL_SCHEMA_NAME))) return 1; build_table_filename(path, sizeof(path) - 1, MYSQL_SCHEMA_NAME.str, "", "", 0); if (!(dirp= my_dir(path, MYF(MY_DONT_SORT)))) { my_error(ER_FILE_NOT_FOUND, MYF(0), path, my_errno); close_thread_tables(thd); thd->release_transactional_locks(); return 1; } else { size_t i; Dynamic_array files(PSI_INSTRUMENT_MEM, dirp->number_of_files); Discovered_table_list tl(thd, &files); int err; err= ha_discover_table_names(thd, &MYSQL_SCHEMA_NAME, dirp, &tl, false); my_dirend(dirp); close_thread_tables(thd); thd->release_transactional_locks(); if (err) return err; for (i = 0; i < files.elements(); ++i) { if (strncmp(files.at(i)->str, rpl_gtid_slave_state_table_name.str, rpl_gtid_slave_state_table_name.length) == 0) { if ((err= (*cb)(thd, files.at(i), cb_data))) return err; } } } return 0; } struct load_gtid_state_cb_data { HASH *hash; DYNAMIC_ARRAY *array; struct rpl_slave_state::gtid_pos_table *table_list; struct rpl_slave_state::gtid_pos_table *default_entry; }; static int process_gtid_pos_table(THD *thd, LEX_CSTRING *table_name, void *hton, struct load_gtid_state_cb_data *data) { struct rpl_slave_state::gtid_pos_table *p, *entry, **next_ptr; bool is_default= (strcmp(table_name->str, rpl_gtid_slave_state_table_name.str) == 0); /* Ignore tables with duplicate storage engine, with a warning. Prefer the default mysql.gtid_slave_pos over another table mysql.gtid_slave_posXXX with the same storage engine. */ next_ptr= &data->table_list; entry= data->table_list; while (entry) { if (entry->table_hton == hton) { static const char *warning_msg= "Ignoring redundant table mysql.%s " "since mysql.%s has the same storage engine"; if (!is_default) { /* Ignore the redundant table. */ sql_print_warning(warning_msg, table_name->str, entry->table_name.str); return 0; } else { sql_print_warning(warning_msg, entry->table_name.str, table_name->str); /* Delete the redundant table, and proceed to add this one instead. */ *next_ptr= entry->next; my_free(entry); break; } } next_ptr= &entry->next; entry= entry->next; } p= rpl_global_gtid_slave_state->alloc_gtid_pos_table(table_name, hton, rpl_slave_state::GTID_POS_AVAILABLE); if (!p) return 1; p->next= data->table_list; data->table_list= p; if (is_default) data->default_entry= p; return 0; } /* Put tables corresponding to @@gtid_pos_auto_engines at the end of the list, marked to be auto-created if needed. */ static int gtid_pos_auto_create_tables(rpl_slave_state::gtid_pos_table **list_ptr) { plugin_ref *auto_engines; int err= 0; mysql_mutex_lock(&LOCK_global_system_variables); for (auto_engines= opt_gtid_pos_auto_plugins; !err && auto_engines && *auto_engines; ++auto_engines) { void *hton= plugin_hton(*auto_engines); char buf[FN_REFLEN+1]; LEX_CSTRING table_name; char *p; rpl_slave_state::gtid_pos_table *entry, **next_ptr; /* See if this engine is already in the list. */ next_ptr= list_ptr; entry= *list_ptr; while (entry) { if (entry->table_hton == hton) break; next_ptr= &entry->next; entry= entry->next; } if (entry) continue; /* Add an auto-create entry for this engine at end of list. */ p= strmake(buf, rpl_gtid_slave_state_table_name.str, FN_REFLEN); p= strmake(p, "_", FN_REFLEN - (p - buf)); p= strmake(p, plugin_name(*auto_engines)->str, FN_REFLEN - (p - buf)); table_name.str= buf; table_name.length= p - buf; table_case_convert(const_cast(table_name.str), static_cast(table_name.length)); entry= rpl_global_gtid_slave_state->alloc_gtid_pos_table (&table_name, hton, rpl_slave_state::GTID_POS_AUTO_CREATE); if (!entry) { err= 1; break; } *next_ptr= entry; } mysql_mutex_unlock(&LOCK_global_system_variables); return err; } static int load_gtid_state_cb(THD *thd, LEX_CSTRING *table_name, void *arg) { int err; load_gtid_state_cb_data *data= static_cast(arg); void *hton; if ((err= scan_one_gtid_slave_pos_table(thd, data->hash, data->array, table_name, &hton))) return err; return process_gtid_pos_table(thd, table_name, hton, data); } int rpl_load_gtid_slave_state(THD *thd) { bool array_inited= false; struct gtid_pos_element tmp_entry, *entry; HASH hash; DYNAMIC_ARRAY array; int err= 0; uint32 i; load_gtid_state_cb_data cb_data; rpl_slave_state::list_element *old_gtids_list; DBUG_ENTER("rpl_load_gtid_slave_state"); mysql_mutex_lock(&rpl_global_gtid_slave_state->LOCK_slave_state); bool loaded= rpl_global_gtid_slave_state->loaded; mysql_mutex_unlock(&rpl_global_gtid_slave_state->LOCK_slave_state); if (loaded) DBUG_RETURN(0); cb_data.table_list= NULL; cb_data.default_entry= NULL; my_hash_init(PSI_INSTRUMENT_ME, &hash, &my_charset_bin, 32, offsetof(gtid_pos_element, gtid) + offsetof(rpl_gtid, domain_id), sizeof(uint32), NULL, my_free, HASH_UNIQUE); if ((err= my_init_dynamic_array(PSI_INSTRUMENT_ME, &array, sizeof(gtid_pos_element), 0, 0, MYF(0)))) goto end; array_inited= true; cb_data.hash = &hash; cb_data.array = &array; if ((err= scan_all_gtid_slave_pos_table(thd, load_gtid_state_cb, &cb_data))) goto end; if (!cb_data.default_entry) { /* If the mysql.gtid_slave_pos table does not exist, but at least one other table is available, arbitrarily pick the first in the list to use as default. */ cb_data.default_entry= cb_data.table_list; } if ((err= gtid_pos_auto_create_tables(&cb_data.table_list))) goto end; mysql_mutex_lock(&rpl_global_gtid_slave_state->LOCK_slave_state); if (rpl_global_gtid_slave_state->loaded) { mysql_mutex_unlock(&rpl_global_gtid_slave_state->LOCK_slave_state); goto end; } if (!cb_data.table_list) { my_error(ER_NO_SUCH_TABLE, MYF(0), "mysql", rpl_gtid_slave_state_table_name.str); mysql_mutex_unlock(&rpl_global_gtid_slave_state->LOCK_slave_state); err= 1; goto end; } for (i= 0; i < array.elements; ++i) { get_dynamic(&array, (uchar *)&tmp_entry, i); if ((err= rpl_global_gtid_slave_state->update_nolock(tmp_entry.gtid.domain_id, tmp_entry.gtid.server_id, tmp_entry.sub_id, tmp_entry.gtid.seq_no, tmp_entry.hton, NULL))) { mysql_mutex_unlock(&rpl_global_gtid_slave_state->LOCK_slave_state); my_error(ER_OUT_OF_RESOURCES, MYF(0)); goto end; } } for (i= 0; i < hash.records; ++i) { entry= (struct gtid_pos_element *)my_hash_element(&hash, i); if (opt_bin_log && mysql_bin_log.bump_seq_no_counter_if_needed(entry->gtid.domain_id, entry->gtid.seq_no)) { mysql_mutex_unlock(&rpl_global_gtid_slave_state->LOCK_slave_state); my_error(ER_OUT_OF_RESOURCES, MYF(0)); goto end; } } rpl_global_gtid_slave_state->set_gtid_pos_tables_list(cb_data.table_list, cb_data.default_entry); cb_data.table_list= NULL; rpl_global_gtid_slave_state->loaded= true; mysql_mutex_unlock(&rpl_global_gtid_slave_state->LOCK_slave_state); /* Clear out no longer needed elements now. */ old_gtids_list= rpl_global_gtid_slave_state->gtid_grab_pending_delete_list(); rpl_global_gtid_slave_state->gtid_delete_pending(thd, &old_gtids_list); if (old_gtids_list) rpl_global_gtid_slave_state->put_back_list(old_gtids_list); end: if (array_inited) delete_dynamic(&array); my_hash_free(&hash); if (cb_data.table_list) rpl_global_gtid_slave_state->free_gtid_pos_tables(cb_data.table_list); DBUG_RETURN(err); } static int find_gtid_pos_tables_cb(THD *thd, LEX_CSTRING *table_name, void *arg) { load_gtid_state_cb_data *data= static_cast(arg); TABLE_LIST tlist; TABLE *table= NULL; int err; thd->reset_for_next_command(); tlist.init_one_table(&MYSQL_SCHEMA_NAME, table_name, NULL, TL_READ); if ((err= open_and_lock_tables(thd, &tlist, FALSE, 0))) goto end; table= tlist.table; if ((err= gtid_check_rpl_slave_state_table(table))) goto end; err= process_gtid_pos_table(thd, table_name, table->s->db_type(), data); end: if (table) { ha_commit_trans(thd, FALSE); ha_commit_trans(thd, TRUE); close_thread_tables(thd); thd->release_transactional_locks(); } return err; } /* Re-compute the list of available mysql.gtid_slave_posXXX tables. This is done at START SLAVE to pick up any newly created tables without requiring server restart. */ int find_gtid_slave_pos_tables(THD *thd) { int err= 0; load_gtid_state_cb_data cb_data; uint num_running; mysql_mutex_lock(&rpl_global_gtid_slave_state->LOCK_slave_state); bool loaded= rpl_global_gtid_slave_state->loaded; mysql_mutex_unlock(&rpl_global_gtid_slave_state->LOCK_slave_state); if (!loaded) return 0; cb_data.table_list= NULL; cb_data.default_entry= NULL; if ((err= scan_all_gtid_slave_pos_table(thd, find_gtid_pos_tables_cb, &cb_data))) goto end; if (!cb_data.table_list) { my_error(ER_NO_SUCH_TABLE, MYF(0), "mysql", rpl_gtid_slave_state_table_name.str); err= 1; goto end; } if (!cb_data.default_entry) { /* If the mysql.gtid_slave_pos table does not exist, but at least one other table is available, arbitrarily pick the first in the list to use as default. */ cb_data.default_entry= cb_data.table_list; } if ((err= gtid_pos_auto_create_tables(&cb_data.table_list))) goto end; mysql_mutex_lock(&LOCK_active_mi); num_running= any_slave_sql_running(true); mysql_mutex_lock(&rpl_global_gtid_slave_state->LOCK_slave_state); if (num_running <= 1) { /* If no slave is running now, the count will be 1, since this SQL thread which is starting is included in the count. In this case, we can safely replace the list, no-one can be trying to read it without lock. */ DBUG_ASSERT(num_running == 1); rpl_global_gtid_slave_state->set_gtid_pos_tables_list(cb_data.table_list, cb_data.default_entry); cb_data.table_list= NULL; } else { /* If there are SQL threads running, we cannot safely remove the old list. However we can add new entries, and warn about any tables that disappeared, but may still be visible to running SQL threads. */ rpl_slave_state::gtid_pos_table *new_entry, **next_ptr_ptr; auto old_entry= rpl_global_gtid_slave_state-> gtid_pos_tables.load(std::memory_order_relaxed); while (old_entry) { new_entry= cb_data.table_list; while (new_entry) { if (new_entry->table_hton == old_entry->table_hton) break; new_entry= new_entry->next; } if (!new_entry) sql_print_warning("The table mysql.%s was removed. " "This change will not take full effect " "until all SQL threads have been restarted", old_entry->table_name.str); old_entry= old_entry->next; } next_ptr_ptr= &cb_data.table_list; new_entry= cb_data.table_list; while (new_entry) { /* Check if we already have a table with this storage engine. */ old_entry= rpl_global_gtid_slave_state-> gtid_pos_tables.load(std::memory_order_relaxed); while (old_entry) { if (new_entry->table_hton == old_entry->table_hton) break; old_entry= old_entry->next; } if (old_entry) { /* This new_entry is already available in the list. */ next_ptr_ptr= &new_entry->next; new_entry= new_entry->next; } else { /* Move this new_entry to the list. */ rpl_slave_state::gtid_pos_table *next= new_entry->next; rpl_global_gtid_slave_state->add_gtid_pos_table(new_entry); *next_ptr_ptr= next; new_entry= next; } } } mysql_mutex_unlock(&rpl_global_gtid_slave_state->LOCK_slave_state); mysql_mutex_unlock(&LOCK_active_mi); end: if (cb_data.table_list) rpl_global_gtid_slave_state->free_gtid_pos_tables(cb_data.table_list); return err; } void rpl_group_info::reinit(Relay_log_info *rli) { this->rli= rli; tables_to_lock= NULL; tables_to_lock_count= 0; trans_retries= 0; last_event_start_time= 0; gtid_sub_id= 0; commit_id= 0; gtid_pending= false; worker_error= 0; row_stmt_start_timestamp= 0; long_find_row_note_printed= false; did_mark_start_commit= false; gtid_ev_flags2= 0; gtid_ev_flags_extra= 0; gtid_ev_sa_seq_no= 0; last_master_timestamp = 0; gtid_ignore_duplicate_state= GTID_DUPLICATE_NULL; speculation= SPECULATE_NO; rpt= NULL; start_alter_ev= NULL; direct_commit_alter= false; commit_orderer.reinit(); } rpl_group_info::rpl_group_info(Relay_log_info *rli) : thd(0), wait_commit_sub_id(0), wait_commit_group_info(0), parallel_entry(0), deferred_events(NULL), m_annotate_event(0), is_parallel_exec(false), gtid_ev_flags2(0), gtid_ev_flags_extra(0), gtid_ev_sa_seq_no(0), reserved_start_alter_thread(0), finish_event_group_called(0), rpt(NULL), start_alter_ev(NULL), direct_commit_alter(false), sa_info(NULL) { reinit(rli); bzero(¤t_gtid, sizeof(current_gtid)); mysql_mutex_init(key_rpl_group_info_sleep_lock, &sleep_lock, MY_MUTEX_INIT_FAST); mysql_cond_init(key_rpl_group_info_sleep_cond, &sleep_cond, NULL); } rpl_group_info::~rpl_group_info() { free_annotate_event(); delete deferred_events; mysql_mutex_destroy(&sleep_lock); mysql_cond_destroy(&sleep_cond); } int event_group_new_gtid(rpl_group_info *rgi, Gtid_log_event *gev) { uint64 sub_id= rpl_global_gtid_slave_state->next_sub_id(gev->domain_id); if (!sub_id) { /* Out of memory caused hash insertion to fail. */ return 1; } rgi->gtid_sub_id= sub_id; rgi->current_gtid.domain_id= gev->domain_id; rgi->current_gtid.server_id= gev->server_id; rgi->current_gtid.seq_no= gev->seq_no; rgi->commit_id= gev->commit_id; rgi->gtid_pending= true; rgi->sa_info= NULL; return 0; } void delete_or_keep_event_post_apply(rpl_group_info *rgi, Log_event_type typ, Log_event *ev) { /* ToDo: This needs to work on rpl_group_info, not Relay_log_info, to be thread-safe for parallel replication. */ switch (typ) { case FORMAT_DESCRIPTION_EVENT: /* Format_description_log_event should not be deleted because it will be used to read info about the relay log's format; it will be deleted when the SQL thread does not need it, i.e. when this thread terminates. */ break; case ANNOTATE_ROWS_EVENT: /* Annotate_rows event should not be deleted because after it has been applied, thd->query points to the string inside this event. The thd->query will be used to generate new Annotate_rows event during applying the subsequent Rows events. */ rgi->set_annotate_event((Annotate_rows_log_event*) ev); break; case DELETE_ROWS_EVENT_V1: case UPDATE_ROWS_EVENT_V1: case WRITE_ROWS_EVENT_V1: case DELETE_ROWS_EVENT: case UPDATE_ROWS_EVENT: case WRITE_ROWS_EVENT: case WRITE_ROWS_COMPRESSED_EVENT: case DELETE_ROWS_COMPRESSED_EVENT: case UPDATE_ROWS_COMPRESSED_EVENT: case WRITE_ROWS_COMPRESSED_EVENT_V1: case UPDATE_ROWS_COMPRESSED_EVENT_V1: case DELETE_ROWS_COMPRESSED_EVENT_V1: /* After the last Rows event has been applied, the saved Annotate_rows event (if any) is not needed anymore and can be deleted. */ if (((Rows_log_event*)ev)->get_flags(Rows_log_event::STMT_END_F)) rgi->free_annotate_event(); /* fall through */ default: DBUG_PRINT("info", ("Deleting the event after it has been executed")); if (!rgi->is_deferred_event(ev)) delete ev; break; } } void rpl_group_info::cleanup_context(THD *thd, bool error, bool keep_domain_owner) { DBUG_ENTER("rpl_group_info::cleanup_context"); DBUG_PRINT("enter", ("error: %d", (int) error)); DBUG_ASSERT(this->thd == thd); /* 1) Instances of Table_map_log_event, if ::do_apply_event() was called on them, may have opened tables, which we cannot be sure have been closed (because maybe the Rows_log_event have not been found or will not be, because slave SQL thread is stopping, or relay log has a missing tail etc). So we close all thread's tables. And so the table mappings have to be cancelled. 2) Rows_log_event::do_apply_event() may even have started statements or transactions on them, which we need to rollback in case of error. 3) If finding a Format_description_log_event after a BEGIN, we also need to rollback before continuing with the next events. 4) so we need this "context cleanup" function. */ if (unlikely(error)) { trans_rollback_stmt(thd); // if a "statement transaction" /* trans_rollback() also resets OPTION_GTID_BEGIN */ trans_rollback(thd); // if a "real transaction" /* Now that we have rolled back the transaction, make sure we do not erroneously update the GTID position. */ gtid_pending= false; } m_table_map.clear_tables(); slave_close_thread_tables(thd); if (unlikely(error)) { // leave alone any XA prepared transactions if (thd->transaction->xid_state.is_explicit_XA() && thd->transaction->xid_state.get_state_code() != XA_PREPARED) xa_trans_force_rollback(thd); thd->release_transactional_locks(); if (thd == rli->sql_driver_thd) { /* Reset flags. This is needed to handle incident events and errors in the relay log noticed by the sql driver thread. */ rli->clear_flag(Relay_log_info::IN_STMT); rli->clear_flag(Relay_log_info::IN_TRANSACTION); } /* Ensure we always release the domain for others to process, when using --gtid-ignore-duplicates. */ if (gtid_ignore_duplicate_state != GTID_DUPLICATE_NULL && !keep_domain_owner) rpl_global_gtid_slave_state->release_domain_owner(this); } /* Cleanup for the flags that have been set at do_apply_event. */ thd->variables.option_bits&= ~(OPTION_NO_FOREIGN_KEY_CHECKS | OPTION_RELAXED_UNIQUE_CHECKS | OPTION_NO_CHECK_CONSTRAINT_CHECKS); /* Reset state related to long_find_row notes in the error log: - timestamp - flag that decides whether the slave prints or not */ reset_row_stmt_start_timestamp(); unset_long_find_row_note_printed(); DBUG_EXECUTE_IF("inject_sleep_gtid_100_x_x", { if (current_gtid.domain_id == 100) my_sleep(50000); };); DBUG_VOID_RETURN; } void rpl_group_info::clear_tables_to_lock() { DBUG_ENTER("rpl_group_info::clear_tables_to_lock()"); #ifndef DBUG_OFF /** When replicating in RBR and MyISAM Merge tables are involved open_and_lock_tables (called in do_apply_event) appends the base tables to the list of tables_to_lock. Then these are removed from the list in close_thread_tables (which is called before we reach this point). This assertion just confirms that we get no surprises at this point. */ uint i=0; for (TABLE_LIST *ptr= tables_to_lock ; ptr ; ptr= ptr->next_global, i++) ; DBUG_ASSERT(i == tables_to_lock_count); #endif while (tables_to_lock) { uchar* to_free= reinterpret_cast(tables_to_lock); if (tables_to_lock->m_tabledef_valid) { tables_to_lock->m_tabledef.table_def::~table_def(); tables_to_lock->m_tabledef_valid= FALSE; } /* If blob fields were used during conversion of field values from the master table into the slave table, then we need to free the memory used temporarily to store their values before copying into the slave's table. */ if (tables_to_lock->m_conv_table) free_blobs(tables_to_lock->m_conv_table); tables_to_lock= static_cast(tables_to_lock->next_global); tables_to_lock_count--; my_free(to_free); } DBUG_ASSERT(tables_to_lock == NULL && tables_to_lock_count == 0); DBUG_VOID_RETURN; } void rpl_group_info::slave_close_thread_tables(THD *thd) { DBUG_ENTER("rpl_group_info::slave_close_thread_tables(THD *thd)"); thd->get_stmt_da()->set_overwrite_status(true); #ifdef WITH_WSREP // This can happen e.g. when table_def::compatible_with fails and sets a error // but thd->is_error() is false then. However, we do not want to commit // statement on Galera instead we want to rollback it as later in // apply_write_set we rollback transaction and that can't be done // after wsrep transaction state is s_committed. if (WSREP(thd)) (thd->is_error() || thd->is_slave_error) ? trans_rollback_stmt(thd) : trans_commit_stmt(thd); else #endif thd->is_error() ? trans_rollback_stmt(thd) : trans_commit_stmt(thd); thd->get_stmt_da()->set_overwrite_status(false); close_thread_tables(thd); /* - If transaction rollback was requested due to deadlock perform it and release metadata locks. - If inside a multi-statement transaction, defer the release of metadata locks until the current transaction is either committed or rolled back. This prevents other statements from modifying the table for the entire duration of this transaction. This provides commit ordering and guarantees serializability across multiple transactions. - If in autocommit mode, or outside a transactional context, automatically release metadata locks of the current statement. */ if (thd->transaction_rollback_request) { trans_rollback_implicit(thd); thd->release_transactional_locks(); } else if (! thd->in_multi_stmt_transaction_mode()) thd->release_transactional_locks(); else thd->mdl_context.release_statement_locks(); clear_tables_to_lock(); DBUG_VOID_RETURN; } static void mark_start_commit_inner(rpl_parallel_entry *e, group_commit_orderer *gco, rpl_group_info *rgi) { group_commit_orderer *tmp; uint64 count= ++e->count_committing_event_groups; /* Signal any following GCO whose wait_count has been reached now. */ tmp= gco; DBUG_ASSERT(!tmp->gc_done); while ((tmp= tmp->next_gco)) { DBUG_ASSERT(!tmp->gc_done); uint64 wait_count= tmp->wait_count; if (wait_count > count) break; mysql_cond_broadcast(&tmp->COND_group_commit_orderer); } } void rpl_group_info::mark_start_commit_no_lock() { if (did_mark_start_commit) return; did_mark_start_commit= true; mark_start_commit_inner(parallel_entry, gco, this); } void rpl_group_info::mark_start_commit() { rpl_parallel_entry *e; if (did_mark_start_commit) return; did_mark_start_commit= true; e= this->parallel_entry; mysql_mutex_lock(&e->LOCK_parallel_entry); mark_start_commit_inner(e, gco, this); mysql_mutex_unlock(&e->LOCK_parallel_entry); } /* Format the current GTID as a string suitable for printing in error messages. The string is stored in a buffer inside rpl_group_info, so remains valid until next call to gtid_info() or until destruction of rpl_group_info. If no GTID is available, then NULL is returned. */ char * rpl_group_info::gtid_info() const { if (!gtid_sub_id || !current_gtid.seq_no) return NULL; my_snprintf(gtid_info_buf, sizeof(gtid_info_buf), "Gtid %u-%u-%llu", current_gtid.domain_id, current_gtid.server_id, current_gtid.seq_no); return gtid_info_buf; } /* Undo the effect of a prior mark_start_commit(). This is only used for retrying a transaction in parallel replication, after we have encountered a deadlock or other temporary error. When we get such a deadlock, it means that the current group of transactions did not yet all start committing (else they would not have deadlocked). So we will not yet have woken up anything in the next group, our rgi->gco is still live, and we can simply decrement the counter (to be incremented again later, when the retry succeeds and reaches the commit step). */ void rpl_group_info::unmark_start_commit() { rpl_parallel_entry *e; if (!did_mark_start_commit) return; did_mark_start_commit= false; e= this->parallel_entry; mysql_mutex_lock(&e->LOCK_parallel_entry); --e->count_committing_event_groups; mysql_mutex_unlock(&e->LOCK_parallel_entry); } rpl_sql_thread_info::rpl_sql_thread_info(Rpl_filter *filter) : rpl_filter(filter) { cached_charset_invalidate(); } void rpl_sql_thread_info::cached_charset_invalidate() { DBUG_ENTER("rpl_group_info::cached_charset_invalidate"); /* Full of zeroes means uninitialized. */ bzero(cached_charset, sizeof(cached_charset)); DBUG_VOID_RETURN; } bool rpl_sql_thread_info::cached_charset_compare(char *charset) const { DBUG_ENTER("rpl_group_info::cached_charset_compare"); if (memcmp(cached_charset, charset, sizeof(cached_charset))) { memcpy(const_cast(cached_charset), charset, sizeof(cached_charset)); DBUG_RETURN(1); } DBUG_RETURN(0); } /** Store the file and position where the slave's SQL thread are in the relay log. Notes: - This function should be called either from the slave SQL thread, or when the slave thread is not running. (It reads the group_{relay|master}_log_{pos|name} and delay fields in the rli object. These may only be modified by the slave SQL thread or by a client thread when the slave SQL thread is not running.) - If there is an active transaction, then we do not update the position in the relay log. This is to ensure that we re-execute statements if we die in the middle of an transaction that was rolled back. - As a transaction never spans binary logs, we don't have to handle the case where we do a relay-log-rotation in the middle of the transaction. If transactions could span several binlogs, we would have to ensure that we do not delete the relay log file where the transaction started before switching to a new relay log file. - Error can happen if writing to file fails or if flushing the file fails. @param rli The object representing the Relay_log_info. @todo Change the log file information to a binary format to avoid calling longlong2str. @return 0 on success, 1 on error. */ bool Relay_log_info::flush() { bool error=0; DBUG_ENTER("Relay_log_info::flush()"); IO_CACHE *file = &info_file; // 2*file name, 2*long long, 2*unsigned long, 6*'\n' char buff[FN_REFLEN * 2 + 22 * 2 + 10 * 2 + 6], *pos; my_b_seek(file, 0L); pos= longlong10_to_str(LINES_IN_RELAY_LOG_INFO_WITH_DELAY, buff, 10); *pos++='\n'; pos=strmov(pos, group_relay_log_name); *pos++='\n'; pos=longlong10_to_str(group_relay_log_pos, pos, 10); *pos++='\n'; pos=strmov(pos, group_master_log_name); *pos++='\n'; pos=longlong10_to_str(group_master_log_pos, pos, 10); *pos++='\n'; pos= longlong10_to_str(sql_delay, pos, 10); *pos++= '\n'; if (my_b_write(file, (uchar*) buff, (size_t) (pos-buff))) error=1; if (flush_io_cache(file)) error=1; if (sync_relayloginfo_period && !error && ++sync_counter >= sync_relayloginfo_period) { if (my_sync(info_fd, MYF(MY_WME))) error=1; sync_counter= 0; } /* Flushing the relay log is done by the slave I/O thread or by the user on STOP SLAVE. */ DBUG_RETURN(error); } #endif