diff options
Diffstat (limited to '')
| -rw-r--r-- | mdadm.conf.5.in | 750 |
1 files changed, 750 insertions, 0 deletions
diff --git a/mdadm.conf.5.in b/mdadm.conf.5.in new file mode 100644 index 0000000..787e51e --- /dev/null +++ b/mdadm.conf.5.in @@ -0,0 +1,750 @@ +.\" Copyright Neil Brown and others. +.\" This program is free software; you can redistribute it and/or modify +.\" it under the terms of the GNU General Public License as published by +.\" the Free Software Foundation; either version 2 of the License, or +.\" (at your option) any later version. +.\" See file COPYING in distribution for details. +.TH MDADM.CONF 5 +.SH NAME +mdadm.conf \- configuration for management of Software RAID with mdadm +.SH SYNOPSIS +{CONFFILE} +.SH DESCRIPTION +.PP +.I mdadm +is a tool for creating, managing, and monitoring RAID devices using the +.B md +driver in Linux. +.PP +Some common tasks, such as assembling all arrays, can be simplified +by describing the devices and arrays in this configuration file. + +.SS SYNTAX +The file should be seen as a collection of words separated by white +space (space, tab, or newline). +Any word that beings with a hash sign (#) starts a comment and that +word together with the remainder of the line is ignored. + +Spaces can be included in a word using quotation characters. Either +single quotes +.RB ( ' ) +or double quotes (\fB"\fP) +may be used. All the characters from one quotation character to +next identical character are protected and will not be used to +separate words to start new quoted strings. To include a single quote +it must be between double quotes. To include a double quote it must +be between single quotes. + +Any line that starts with white space (space or tab) is treated as +though it were a continuation of the previous line. + +Empty lines are ignored, but otherwise each (non continuation) line +must start with a keyword as listed below. The keywords are case +insensitive and can be abbreviated to 3 characters. + +The keywords are: +.TP +.B DEVICE +A +.B device +line lists the devices (whole devices or partitions) that might contain +a component of an MD array. When looking for the components of an +array, +.I mdadm +will scan these devices (or any devices listed on the command line). + +The +.B device +line may contain a number of different devices (separated by spaces) +and each device name can contain wild cards as defined by +.BR glob (7). + +Also, there may be several device lines present in the file. + +Alternatively, a +.B device +line can contain either or both of the words +.B containers +and +.BR partitions . +The word +.B containers +will cause +.I mdadm +to look for assembled CONTAINER arrays and included them as a source +for assembling further arrays. + +The word +.I partitions +will cause +.I mdadm +to read +.I /proc/partitions +and include all devices and partitions found therein. +.I mdadm +does not use the names from +.I /proc/partitions +but only the major and minor device numbers. It scans +.I /dev +to find the name that matches the numbers. + +If no DEVICE line is present in any config file, +then "DEVICE partitions containers" is assumed. + +For example: +.IP +DEVICE /dev/hda* /dev/hdc* +.br +DEV /dev/sd* +.br +DEVICE /dev/disk/by-path/pci* +.br +DEVICE partitions + +.TP +.B ARRAY +The ARRAY lines identify actual arrays. The second word on the line +may be the name of the device where the array is normally +assembled, such as +.B /dev/md1 +or +.BR /dev/md/backup . +If the name does not start with a slash +.RB (' / '), +it is treated as being in +.BR /dev/md/ . +Alternately the word +.B <ignore> +(complete with angle brackets) can be given in which case any array +which matches the rest of the line will never be automatically assembled. +If no device name is given, +.I mdadm +will use various heuristics to determine an appropriate name. + +Subsequent words identify the array, or identify the array as a member +of a group. If multiple identities are given, +then a component device must match ALL identities to be considered a +match. Each identity word has a tag, and equals sign, and some value. +The tags are: +.RS 4 +.TP +.B uuid= +The value should be a 128 bit uuid in hexadecimal, with punctuation +interspersed if desired. This must match the uuid stored in the +superblock. +.TP +.B super\-minor= +The value is an integer which indicates the minor number that was +stored in the superblock when the array was created. When an array is +created as /dev/mdX, then the minor number X is stored. +.TP +.B devices= +The value is a comma separated list of device names or device name +patterns. +Only devices with names which match one entry in the list will be used +to assemble the array. Note that the devices +listed there must also be listed on a DEVICE line. +.TP +.B level= +The value is a RAID level. This is not normally used to +identify an array, but is supported so that the output of + +.B "mdadm \-\-examine \-\-scan" + +can be use directly in the configuration file. +.TP +.B num\-devices= +The value is the number of devices in a complete active array. As with +.B level= +this is mainly for compatibility with the output of + +.BR "mdadm \-\-examine \-\-scan" . + +.TP +.B spares= +The value is a number of spare devices to expect the array to have. +The sole use of this keyword and value is as follows: +.B mdadm \-\-monitor +will report an array if it is found to have fewer than this number of +spares when +.B \-\-monitor +starts or when +.B \-\-oneshot +is used. + +.TP +.B spare\-group= +The value is a textual name for a group of arrays. All arrays with +the same +.B spare\-group +name are considered to be part of the same group. The significance of +a group of arrays is that +.I mdadm +will, when monitoring the arrays, move a spare drive from one array in +a group to another array in that group if the first array had a failed +or missing drive but no spare. + +.TP +.B auto= +This option is rarely needed with mdadm-3.0, particularly if use with +the Linux kernel v2.6.28 or later. +It tells +.I mdadm +whether to use partitionable array or non-partitionable arrays and, +in the absence of +.IR udev , +how many partition devices to create. From 2.6.28 all md array +devices are partitionable, hence this option is not needed. + +The value of this option can be "yes" or "md" to indicate that a +traditional, non-partitionable md array should be created, or "mdp", +"part" or "partition" to indicate that a partitionable md array (only +available in linux 2.6 and later) should be used. This later set can +also have a number appended to indicate how many partitions to create +device files for, e.g. +.BR auto=mdp5 . +The default is 4. + +.TP +.B bitmap= +The option specifies a file in which a write-intent bitmap should be +found. When assembling the array, +.I mdadm +will provide this file to the +.B md +driver as the bitmap file. This has the same function as the +.B \-\-bitmap\-file +option to +.BR \-\-assemble . + +.TP +.B metadata= +Specify the metadata format that the array has. This is mainly +recognised for comparability with the output of +.BR "mdadm \-Es" . + +.TP +.B container= +Specify that this array is a member array of some container. The +value given can be either a path name in /dev, or a UUID of the +container array. + +.TP +.B member= +Specify that this array is a member array of some container. Each +type of container has some way to enumerate member arrays, often a +simple sequence number. The value identifies which member of a +container the array is. It will usually accompany a "container=" word. +.RE + +.TP +.B MAILADDR +The +.B mailaddr +line gives an E-mail address that alerts should be +sent to when +.I mdadm +is running in +.B \-\-monitor +mode (and was given the +.B \-\-scan +option). There should only be one +.B MAILADDR +line and it should have only one address. Any subsequent addresses +are silently ignored. + +.TP +.B MAILFROM +The +.B mailfrom +line (which can only be abbreviated to at least 5 characters) gives an +address to appear in the "From" address for alert mails. This can be +useful if you want to explicitly set a domain, as the default from +address is "root" with no domain. All words on this line are +catenated with spaces to form the address. + +Note that this value cannot be set via the +.I mdadm +commandline. It is only settable via the config file. +There should only be one +.B MAILADDR +line and it should have only one address. Any subsequent addresses +are silently ignored. + +.TP +.B PROGRAM +The +.B program +line gives the name of a program to be run when +.B "mdadm \-\-monitor" +detects potentially interesting events on any of the arrays that it +is monitoring. This program gets run with two or three arguments, they +being the Event, the md device, and possibly the related component +device. + +There should only be one +.B program +line and it should be given only one program. Any subsequent programs +are silently ignored. + + +.TP +.B CREATE +The +.B create +line gives default values to be used when creating arrays, new members +of arrays, and device entries for arrays. + +There should only be one +.B create +line. Any subsequent lines will override the previous settings. + +Keywords used in the +.I CREATE +line and supported values are: + +.RS 4 +.TP +.B owner= +.TP +.B group= +These can give user/group ids or names to use instead of system +defaults (root/wheel or root/disk). +.TP +.B mode= +An octal file mode such as 0660 can be given to override the default +of 0600. +.TP +.B auto= +This corresponds to the +.B \-\-auto +flag to mdadm. Give +.BR yes , +.BR md , +.BR mdp , +.B part +\(em possibly followed by a number of partitions \(em to indicate how +missing device entries should be created. + +.TP +.B metadata= +The name of the metadata format to use if none is explicitly given. +This can be useful to impose a system-wide default of version-1 superblocks. + +.TP +.B names=yes +Since Linux 2.6.29 it has been possible to create +.B md +devices with a name like +.B md_home +rather than just a number, like +.BR md3 . +.I mdadm +will use the numeric alternative by default as other tools that interact +with md arrays may expect only numbers. +If +.B names=yes +is given in +.I mdadm.conf +then +.I mdadm +will use a name when appropriate. +If +.B names=no +is given, then non-numeric +.I md +device names will not be used even if the default changes in a future +release of +.IR mdadm . + +.TP +.B bbl=no +By default, +.I mdadm +will reserve space for a bad block list (bbl) on all devices +included in or added to any array that supports them. Setting +.B bbl=no +will prevent this, so newly added devices will not have a bad +block log. +.RE + +.TP +.B HOMEHOST +The +.B homehost +line gives a default value for the +.B \-\-homehost= +option to mdadm. There should normally be only one other word on the line. +It should either be a host name, or one of the special words +.BR <system>, +.B <none> +and +.BR <ignore> . +If +.B <system> +is given, then the +.BR gethostname ( 2 ) +systemcall is used to get the host name. This is the default. + +If +.B <ignore> +is given, then a flag is set so that when arrays are being +auto-assembled the checking of the recorded +.I homehost +is disabled. +If +.B <ignore> +is given it is also possible to give an explicit name which will be +used when creating arrays. This is the only case when there can be +more that one other word on the +.B HOMEHOST +line. If there are other words, or other +.B HOMEHOST +lines, they are silently ignored. + +If +.B <none> +is given, then the default of using +.BR gethostname ( 2 ) +is over-ridden and no homehost name is assumed. + +When arrays are created, this host name will be stored in the +metadata. When arrays are assembled using auto-assembly, arrays which +do not record the correct homehost name in their metadata will be +assembled using a "foreign" name. A "foreign" name alway ends with a +digit string preceded by an underscore to differentiate it +from any possible local name. e.g. +.B /dev/md/1_1 +or +.BR /dev/md/home_0 . + +.TP +.B HOMECLUSTER +The +.B homcluster +line gives a default value for the +.B \-\-homecluster= +option to mdadm. It specifies the cluster name for the md device. +The md device can be assembled only on the cluster which matches +the name specified. If +.B homcluster +is not provided, mdadm tries to detect the cluster name automatically. + +There should only be one +.B homecluster +line. Any subsequent lines will be silently ignored. + +.TP +.B AUTO +A list of names of metadata format can be given, each preceded by a +plus or minus sign. Also the word +.I homehost +is allowed as is +.I all +preceded by plus or minus sign. +.I all +is usually last. + +When +.I mdadm +is auto-assembling an array, either via +.I \-\-assemble +or +.I \-\-incremental +and it finds metadata of a given type, it checks that metadata type +against those listed in this line. The first match wins, where +.I all +matches anything. +If a match is found that was preceded by a plus sign, the auto +assembly is allowed. If the match was preceded by a minus sign, the +auto assembly is disallowed. If no match is found, the auto assembly +is allowed. + +If the metadata indicates that the array was created for +.I this +host, and the word +.I homehost +appears before any other match, then the array is treated as a valid +candidate for auto-assembly. + +This can be used to disable all auto-assembly (so that only arrays +explicitly listed in mdadm.conf or on the command line are assembled), +or to disable assembly of certain metadata types which might be +handled by other software. It can also be used to disable assembly of +all foreign arrays - normally such arrays are assembled but given a +non-deterministic name in +.BR /dev/md/ . + +The known metadata types are +.BR 0.90 , +.BR 1.x , +.BR ddf , +.BR imsm . + +.B AUTO +should be given at most once. Subsequent lines are silently ignored. +Thus a later config file in a config directory will not overwrite +the setting in an earlier config file. + +.TP +.B POLICY +This is used to specify what automatic behavior is allowed on devices +newly appearing in the system and provides a way of marking spares that can +be moved to other arrays as well as the migration domains. +.I Domain +can be defined through +.I policy +line by specifying a domain name for a number of paths from +.BR /dev/disk/by-path/ . +A device may belong to several domains. The domain of an array is a union +of domains of all devices in that array. A spare can be automatically +moved from one array to another if the set of the destination array's +.I domains +contains all the +.I domains +of the new disk or if both arrays have the same +.IR spare-group . + +To update hot plug configuration it is necessary to execute +.B mdadm \-\-udev\-rules +command after changing the config file + +Keywords used in the +.I POLICY +line and supported values are: + +.RS 4 +.TP +.B domain= +any arbitrary string +.TP +.B metadata= +0.9 1.x ddf or imsm +.TP +.B path= +file glob matching anything from +.B /dev/disk/by-path +.TP +.B type= +either +.B disk +or +.BR part . +.TP +.B action= +include, re-add, spare, spare-same-slot, or force-spare +.TP +.B auto= +yes, no, or homehost. + +.P +The +.I action +item determines the automatic behavior allowed for devices matching the +.I path +and +.I type +in the same line. If a device matches several lines with different +.I actions +then the most permissive will apply. The ordering of policy lines +is irrelevant to the end result. +.TP +.B include +allows adding a disk to an array if metadata on that disk matches that array +.TP +.B re\-add +will include the device in the array if it appears to be a current member +or a member that was recently removed and the array has a +write-intent-bitmap to allow the +.B re\-add +functionality. +.TP +.B spare +as above and additionally: if the device is bare it can +become a spare if there is any array that it is a candidate for based +on domains and metadata. +.TP +.B spare\-same\-slot +as above and additionally if given slot was used by an array that went +degraded recently and the device plugged in has no metadata then it will +be automatically added to that array (or it's container) +.TP +.B force\-spare +as above and the disk will become a spare in remaining cases +.RE + +.TP +.B PART-POLICY +This is similar to +.B POLICY +and accepts the same keyword assignments. It allows a consistent set +of policies to applied to each of the partitions of a device. + +A +.B PART-POLICY +line should set +.I type=disk +and identify the path to one or more disk devices. Each partition on +these disks will be treated according to the +.I action= +setting from this line. If a +.I domain +is set in the line, then the domain associated with each patition will +be based on the domain, but with +.RB \(dq -part N\(dq +appended, when N is the partition number for the partition that was +found. + +.TP +.B SYSFS +The +.B SYSFS +line lists custom values of MD device's sysfs attributes which will be +stored in sysfs after the array is assembled. Multiple lines are allowed and each +line has to contain the uuid or the name of the device to which it relates. +Lines are applied in reverse order. +.RS 4 +.TP +.B uuid= +hexadecimal identifier of MD device. This has to match the uuid stored in the +superblock. +.TP +.B name= +name of the MD device as was given to +.I mdadm +when the array was created. It will be ignored if +.B uuid +is not empty. +.RE + +.TP +.B MONITORDELAY +The +.B monitordelay +line gives a delay in seconds +.I mdadm +shall wait before pooling md arrays +when +.I mdadm +is running in +.B \-\-monitor +mode. +.B \-d/\-\-delay +command line argument takes precedence over the config file. + +If multiple +.B MINITORDELAY +lines are provided, only first non-zero value is considered. + +.SH FILES + +.SS {CONFFILE} + +The default config file location, used when +.I mdadm +is running without --config option. + +.SS {CONFFILE}.d + +The default directory with config files. Used when +.I mdadm +is running without --config option, after successful reading of the +.B {CONFFILE} +default config file. Files in that directory +are read in lexical order. + + +.SS {CONFFILE2} + +Alternative config file that is read, when +.I mdadm +is running without --config option and the +.B {CONFFILE} +default config file was not opened successfully. + +.SS {CONFFILE2}.d + +The alternative directory with config files. Used when +.I mdadm +is runninng without --config option, after reading the +.B {CONFFILE2} +alternative config file whether it was successful or not. Files in +that directory are read in lexical order. + +.SH EXAMPLE +DEVICE /dev/sd[bcdjkl]1 +.br +DEVICE /dev/hda1 /dev/hdb1 + +# /dev/md0 is known by its UUID. +.br +ARRAY /dev/md0 UUID=3aaa0122:29827cfa:5331ad66:ca767371 +.br +# /dev/md1 contains all devices with a minor number of +.br +# 1 in the superblock. +.br +ARRAY /dev/md1 superminor=1 +.br +# /dev/md2 is made from precisely these two devices +.br +ARRAY /dev/md2 devices=/dev/hda1,/dev/hdb1 + +# /dev/md4 and /dev/md5 are a spare-group and spares +.br +# can be moved between them +.br +ARRAY /dev/md4 uuid=b23f3c6d:aec43a9f:fd65db85:369432df +.br + spare\-group=group1 +.br +ARRAY /dev/md5 uuid=19464854:03f71b1b:e0df2edd:246cc977 +.br + spare\-group=group1 +.br +# /dev/md/home is created if need to be a partitionable md array +.br +# any spare device number is allocated. +.br +ARRAY /dev/md/home UUID=9187a482:5dde19d9:eea3cc4a:d646ab8b +.br + auto=part +.br +POLICY domain=domain1 metadata=imsm path=pci-0000:00:1f.2-scsi-* +.br + action=spare +.br +POLICY domain=domain1 metadata=imsm path=pci-0000:04:00.0-scsi-[01]* +.br + action=include +.br +# One domain comprising of devices attached to specified paths is defined. +.br +# Bare device matching first path will be made an imsm spare on hot plug. +.br +# If more than one array is created on devices belonging to domain1 and +.br +# one of them becomes degraded, then any imsm spare matching any path for +.br +# given domain name can be migrated. +.br +MAILADDR root@mydomain.tld +.br +PROGRAM /usr/sbin/handle\-mdadm\-events +.br +CREATE group=system mode=0640 auto=part\-8 +.br +HOMEHOST <system> +.br +AUTO +1.x homehost \-all +.br +SYSFS name=/dev/md/raid5 group_thread_cnt=4 sync_speed_max=1000000 +.br +SYSFS uuid=bead5eb6:31c17a27:da120ba2:7dfda40d group_thread_cnt=4 +sync_speed_max=1000000 +.br +MONITORDELAY 60 + +.SH SEE ALSO +.BR mdadm (8), +.BR md (4). |