summaryrefslogtreecommitdiffstats
path: root/etc/input.conf
diff options
context:
space:
mode:
Diffstat (limited to 'etc/input.conf')
-rw-r--r--etc/input.conf181
1 files changed, 181 insertions, 0 deletions
diff --git a/etc/input.conf b/etc/input.conf
new file mode 100644
index 0000000..0b0e6da
--- /dev/null
+++ b/etc/input.conf
@@ -0,0 +1,181 @@
+# mpv keybindings
+#
+# Location of user-defined bindings: ~/.config/mpv/input.conf
+#
+# Lines starting with # are comments. Use SHARP to assign the # key.
+# Copy this file and uncomment and edit the bindings you want to change.
+#
+# List of commands and further details: DOCS/man/input.rst
+# List of special keys: --input-keylist
+# Keybindings testing mode: mpv --input-test --force-window --idle
+#
+# Use 'ignore' to unbind a key fully (e.g. 'ctrl+a ignore').
+#
+# Strings need to be quoted and escaped:
+# KEY show-text "This is a single backslash: \\ and a quote: \" !"
+#
+# You can use modifier-key combinations like Shift+Left or Ctrl+Alt+x with
+# the modifiers Shift, Ctrl, Alt and Meta (may not work on the terminal).
+#
+# The default keybindings are hardcoded into the mpv binary.
+# You can disable them completely with: --no-input-default-bindings
+
+# Developer note:
+# On compilation, this file is baked into the mpv binary, and all lines are
+# uncommented (unless '#' is followed by a space) - thus this file defines the
+# default key bindings.
+
+# If this is enabled, treat all the following bindings as default.
+#default-bindings start
+
+#MBTN_LEFT ignore # don't do anything
+#MBTN_LEFT_DBL cycle fullscreen # toggle fullscreen
+#MBTN_RIGHT cycle pause # toggle pause/playback mode
+#MBTN_BACK playlist-prev # skip to the previous file
+#MBTN_FORWARD playlist-next # skip to the next file
+
+# Mouse wheels, touchpad or other input devices that have axes
+# if the input devices supports precise scrolling it will also scale the
+# numeric value accordingly
+#WHEEL_UP add volume 2
+#WHEEL_DOWN add volume -2
+#WHEEL_LEFT seek -10 # seek 10 seconds backward
+#WHEEL_RIGHT seek 10 # seek 10 seconds forward
+
+## Seek units are in seconds, but note that these are limited by keyframes
+#RIGHT seek 5 # seek 5 seconds forward
+#LEFT seek -5 # seek 5 seconds backward
+#UP seek 60 # seek 1 minute forward
+#DOWN seek -60 # seek 1 minute backward
+# Do smaller, always exact (non-keyframe-limited), seeks with shift.
+# Don't show them on the OSD (no-osd).
+#Shift+RIGHT no-osd seek 1 exact # seek exactly 1 second forward
+#Shift+LEFT no-osd seek -1 exact # seek exactly 1 second backward
+#Shift+UP no-osd seek 5 exact # seek exactly 5 seconds forward
+#Shift+DOWN no-osd seek -5 exact # seek exactly 5 seconds backward
+#Ctrl+LEFT no-osd sub-seek -1 # seek to the previous subtitle
+#Ctrl+RIGHT no-osd sub-seek 1 # seek to the next subtitle
+#Ctrl+Shift+LEFT sub-step -1 # change subtitle timing such that the previous subtitle is displayed
+#Ctrl+Shift+RIGHT sub-step 1 # change subtitle timing such that the next subtitle is displayed
+#Alt+left add video-pan-x 0.1 # move the video right
+#Alt+right add video-pan-x -0.1 # move the video left
+#Alt+up add video-pan-y 0.1 # move the video down
+#Alt+down add video-pan-y -0.1 # move the video up
+#Alt++ add video-zoom 0.1 # zoom in
+#ZOOMIN add video-zoom 0.1 # zoom in
+#Alt+- add video-zoom -0.1 # zoom out
+#ZOOMOUT add video-zoom -0.1 # zoom out
+#Alt+BS set video-zoom 0 ; set video-pan-x 0 ; set video-pan-y 0 # reset zoom and pan settings
+#PGUP add chapter 1 # seek to the next chapter
+#PGDWN add chapter -1 # seek to the previous chapter
+#Shift+PGUP seek 600 # seek 10 minutes forward
+#Shift+PGDWN seek -600 # seek 10 minutes backward
+#[ multiply speed 1/1.1 # decrease the playback speed
+#] multiply speed 1.1 # increase the playback speed
+#{ multiply speed 0.5 # halve the playback speed
+#} multiply speed 2.0 # double the playback speed
+#BS set speed 1.0 # reset the speed to normal
+#Shift+BS revert-seek # undo the previous (or marked) seek
+#Shift+Ctrl+BS revert-seek mark # mark the position for revert-seek
+#q quit
+#Q quit-watch-later # exit and remember the playback position
+#q {encode} quit 4
+#ESC set fullscreen no # leave fullscreen
+#ESC {encode} quit 4
+#p cycle pause # toggle pause/playback mode
+#. frame-step # advance one frame and pause
+#, frame-back-step # go back by one frame and pause
+#SPACE cycle pause # toggle pause/playback mode
+#> playlist-next # skip to the next file
+#ENTER playlist-next # skip to the next file
+#< playlist-prev # skip to the previous file
+#O no-osd cycle-values osd-level 3 1 # toggle displaying the OSD on user interaction or always
+#o show-progress # show playback progress
+#P show-progress # show playback progress
+#i script-binding stats/display-stats # display information and statistics
+#I script-binding stats/display-stats-toggle # toggle displaying information and statistics
+#` script-binding console/enable # open the console
+#z add sub-delay -0.1 # shift subtitles 100 ms earlier
+#Z add sub-delay +0.1 # delay subtitles by 100 ms
+#x add sub-delay +0.1 # delay subtitles by 100 ms
+#ctrl++ add audio-delay 0.100 # change audio/video sync by delaying the audio
+#ctrl+- add audio-delay -0.100 # change audio/video sync by shifting the audio earlier
+#Shift+g add sub-scale +0.1 # increase the subtitle font size
+#Shift+f add sub-scale -0.1 # decrease the subtitle font size
+#9 add volume -2
+#/ add volume -2
+#0 add volume 2
+#* add volume 2
+#m cycle mute # toggle mute
+#1 add contrast -1
+#2 add contrast 1
+#3 add brightness -1
+#4 add brightness 1
+#5 add gamma -1
+#6 add gamma 1
+#7 add saturation -1
+#8 add saturation 1
+#Alt+0 set current-window-scale 0.5 # halve the window size
+#Alt+1 set current-window-scale 1.0 # reset the window size
+#Alt+2 set current-window-scale 2.0 # double the window size
+#d cycle deinterlace # toggle the deinterlacing filter
+#r add sub-pos -1 # move subtitles up
+#R add sub-pos +1 # move subtitles down
+#t add sub-pos +1 # move subtitles down
+#v cycle sub-visibility # hide or show the subtitles
+#Alt+v cycle secondary-sub-visibility # hide or show the secondary subtitles
+#V cycle sub-ass-vsfilter-aspect-compat # toggle stretching SSA/ASS subtitles with anamorphic videos to match the historical renderer
+#u cycle-values sub-ass-override "force" "yes" # toggle overriding SSA/ASS subtitle styles with the normal styles
+#j cycle sub # switch subtitle track
+#J cycle sub down # switch subtitle track backwards
+#SHARP cycle audio # switch audio track
+#_ cycle video # switch video track
+#T cycle ontop # toggle placing the video on top of other windows
+#f cycle fullscreen # toggle fullscreen
+#s screenshot # take a screenshot of the video in its original resolution with subtitles
+#S screenshot video # take a screenshot of the video in its original resolution without subtitles
+#Ctrl+s screenshot window # take a screenshot of the window with OSD and subtitles
+#Alt+s screenshot each-frame # automatically screenshot every frame; issue this command again to stop taking screenshots
+#w add panscan -0.1 # decrease panscan
+#W add panscan +0.1 # shrink black bars by cropping the video
+#e add panscan +0.1 # shrink black bars by cropping the video
+#A cycle-values video-aspect-override "16:9" "4:3" "2.35:1" "-1" # cycle the video aspect ratio ("-1" is the container aspect)
+#POWER quit
+#PLAY cycle pause # toggle pause/playback mode
+#PAUSE cycle pause # toggle pause/playback mode
+#PLAYPAUSE cycle pause # toggle pause/playback mode
+#PLAYONLY set pause no # unpause
+#PAUSEONLY set pause yes # pause
+#STOP quit
+#FORWARD seek 60 # seek 1 minute forward
+#REWIND seek -60 # seek 1 minute backward
+#NEXT playlist-next # skip to the next file
+#PREV playlist-prev # skip to the previous file
+#VOLUME_UP add volume 2
+#VOLUME_DOWN add volume -2
+#MUTE cycle mute # toggle mute
+#CLOSE_WIN quit
+#CLOSE_WIN {encode} quit 4
+#ctrl+w quit
+#E cycle edition # switch edition
+#l ab-loop # set/clear A-B loop points
+#L cycle-values loop-file "inf" "no" # toggle infinite looping
+#ctrl+c quit 4
+#DEL script-binding osc/visibility # cycle OSC visibility between never, auto (mouse-move) and always
+#ctrl+h cycle-values hwdec "auto-safe" "no" # toggle hardware decoding
+#F8 show-text ${playlist} # show the playlist
+#F9 show-text ${track-list} # show the list of video, audio and sub tracks
+
+#
+# Legacy bindings (may or may not be removed in the future)
+#
+#! add chapter -1 # seek to the previous chapter
+#@ add chapter 1 # seek to the next chapter
+
+#
+# Not assigned by default
+# (not an exhaustive list of unbound commands)
+#
+
+# ? cycle sub-forced-events-only # display only DVD/PGS forced subtitle events
+# ? stop # stop playback (quit or enter idle mode)