diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-19 02:57:58 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-19 02:57:58 +0000 |
commit | be1c7e50e1e8809ea56f2c9d472eccd8ffd73a97 (patch) | |
tree | 9754ff1ca740f6346cf8483ec915d4054bc5da2d /collectors/python.d.plugin/adaptec_raid/integrations | |
parent | Initial commit. (diff) | |
download | netdata-upstream.tar.xz netdata-upstream.zip |
Adding upstream version 1.44.3.upstream/1.44.3upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to '')
-rw-r--r-- | collectors/python.d.plugin/adaptec_raid/integrations/adaptecraid.md | 204 |
1 files changed, 204 insertions, 0 deletions
diff --git a/collectors/python.d.plugin/adaptec_raid/integrations/adaptecraid.md b/collectors/python.d.plugin/adaptec_raid/integrations/adaptecraid.md new file mode 100644 index 00000000..13d22ba5 --- /dev/null +++ b/collectors/python.d.plugin/adaptec_raid/integrations/adaptecraid.md @@ -0,0 +1,204 @@ +<!--startmeta +custom_edit_url: "https://github.com/netdata/netdata/edit/master/collectors/python.d.plugin/adaptec_raid/README.md" +meta_yaml: "https://github.com/netdata/netdata/edit/master/collectors/python.d.plugin/adaptec_raid/metadata.yaml" +sidebar_label: "AdaptecRAID" +learn_status: "Published" +learn_rel_path: "Data Collection/Storage, Mount Points and Filesystems" +most_popular: False +message: "DO NOT EDIT THIS FILE DIRECTLY, IT IS GENERATED BY THE COLLECTOR'S metadata.yaml FILE" +endmeta--> + +# AdaptecRAID + + +<img src="https://netdata.cloud/img/adaptec.svg" width="150"/> + + +Plugin: python.d.plugin +Module: adaptec_raid + +<img src="https://img.shields.io/badge/maintained%20by-Netdata-%2300ab44" /> + +## Overview + +This collector monitors Adaptec RAID hardware storage controller metrics about both physical and logical drives. + + +It uses the arcconf command line utility (from adaptec) to monitor your raid controller. + +Executed commands: + - `sudo -n arcconf GETCONFIG 1 LD` + - `sudo -n arcconf GETCONFIG 1 PD` + + +This collector is supported on all platforms. + +This collector only supports collecting metrics from a single instance of this integration. + +The module uses arcconf, which can only be executed by root. It uses sudo and assumes that it is configured such that the netdata user can execute arcconf as root without a password. + +### Default Behavior + +#### Auto-Detection + +After all the permissions are satisfied, netdata should be to execute commands via the arcconf command line utility + +#### Limits + +The default configuration for this integration does not impose any limits on data collection. + +#### Performance Impact + +The default configuration for this integration is not expected to impose a significant performance impact on the system. + + +## Metrics + +Metrics grouped by *scope*. + +The scope defines the instance that the metric belongs to. An instance is uniquely identified by a set of labels. + + + +### Per AdaptecRAID instance + +These metrics refer to the entire monitored application. + +This scope has no labels. + +Metrics: + +| Metric | Dimensions | Unit | +|:------|:----------|:----| +| adaptec_raid.ld_status | a dimension per logical device | bool | +| adaptec_raid.pd_state | a dimension per physical device | bool | +| adaptec_raid.smart_warnings | a dimension per physical device | count | +| adaptec_raid.temperature | a dimension per physical device | celsius | + + + +## Alerts + + +The following alerts are available: + +| Alert name | On metric | Description | +|:------------|:----------|:------------| +| [ adaptec_raid_ld_status ](https://github.com/netdata/netdata/blob/master/health/health.d/adaptec_raid.conf) | adaptec_raid.ld_status | logical device status is failed or degraded | +| [ adaptec_raid_pd_state ](https://github.com/netdata/netdata/blob/master/health/health.d/adaptec_raid.conf) | adaptec_raid.pd_state | physical device state is not online | + + +## Setup + +### Prerequisites + +#### Grant permissions for netdata, to run arcconf as sudoer + +The module uses arcconf, which can only be executed by root. It uses sudo and assumes that it is configured such that the netdata user can execute arcconf as root without a password. + +Add to your /etc/sudoers file: +which arcconf shows the full path to the binary. + +```bash +netdata ALL=(root) NOPASSWD: /path/to/arcconf +``` + + +#### Reset Netdata's systemd unit CapabilityBoundingSet (Linux distributions with systemd) + +The default CapabilityBoundingSet doesn't allow using sudo, and is quite strict in general. Resetting is not optimal, but a next-best solution given the inability to execute arcconf using sudo. + +As root user, do the following: + +```bash +mkdir /etc/systemd/system/netdata.service.d +echo -e '[Service]\nCapabilityBoundingSet=~' | tee /etc/systemd/system/netdata.service.d/unset-capability-bounding-set.conf +systemctl daemon-reload +systemctl restart netdata.service +``` + + + +### Configuration + +#### File + +The configuration file name for this integration is `python.d/adaptec_raid.conf`. + + +You can edit the configuration file using the `edit-config` script from the +Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#the-netdata-config-directory). + +```bash +cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata +sudo ./edit-config python.d/adaptec_raid.conf +``` +#### Options + +There are 2 sections: + +* Global variables +* One or more JOBS that can define multiple different instances to monitor. + +The following options can be defined globally: priority, penalty, autodetection_retry, update_every, but can also be defined per JOB to override the global values. + +Additionally, the following collapsed table contains all the options that can be configured inside a JOB definition. + +Every configuration JOB starts with a `job_name` value which will appear in the dashboard, unless a `name` parameter is specified. + + +<details><summary>Config options</summary> + +| Name | Description | Default | Required | +|:----|:-----------|:-------|:--------:| +| update_every | Sets the default data collection frequency. | 5 | no | +| priority | Controls the order of charts at the netdata dashboard. | 60000 | no | +| autodetection_retry | Sets the job re-check interval in seconds. | 0 | no | +| penalty | Indicates whether to apply penalty to update_every in case of failures. | yes | no | + +</details> + +#### Examples + +##### Basic + +A basic example configuration per job + +```yaml +job_name: + name: my_job_name + update_every: 1 # the JOB's data collection frequency + priority: 60000 # the JOB's order on the dashboard + penalty: yes # the JOB's penalty + autodetection_retry: 0 # the JOB's re-check interval in seconds + +``` + + +## Troubleshooting + +### Debug Mode + +To troubleshoot issues with the `adaptec_raid` collector, run the `python.d.plugin` with the debug option enabled. The output +should give you clues as to why the collector isn't working. + +- Navigate to the `plugins.d` directory, usually at `/usr/libexec/netdata/plugins.d/`. If that's not the case on + your system, open `netdata.conf` and look for the `plugins` setting under `[directories]`. + + ```bash + cd /usr/libexec/netdata/plugins.d/ + ``` + +- Switch to the `netdata` user. + + ```bash + sudo -u netdata -s + ``` + +- Run the `python.d.plugin` to debug the collector: + + ```bash + ./python.d.plugin adaptec_raid debug trace + ``` + + |