Adding upstream version 1.44.3.upstream/1.44.3upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

30 files changed, 1438 insertions, 0 deletions

diff --git a/fluent-bit/conf/fluent-bit-macos.conf b/fluent-bit/conf/fluent-bit-macos.conf
new file mode 100644
index 00000000..05da7ee6
--- /dev/null
+++ b/fluent-bit/conf/fluent-bit-macos.conf
@@ -0,0 +1,90 @@
+[SERVICE]
+    # Flush
+    # =====
+    # set an interval of seconds before to flush records to a destination
+    flush        1
+
+    # Daemon
+    # ======
+    # instruct Fluent Bit to run in foreground or background mode.
+    daemon       Off
+
+    # Log_Level
+    # =========
+    # Set the verbosity level of the service, values can be:
+    #
+    # - error
+    # - warning
+    # - info
+    # - debug
+    # - trace
+    #
+    # by default 'info' is set, that means it includes 'error' and 'warning'.
+    log_level    info
+
+    # Parsers File
+    # ============
+    # specify an optional 'Parsers' configuration file
+    parsers_file parsers.conf
+
+    # Plugins File
+    # ============
+    # specify an optional 'Plugins' configuration file to load external plugins.
+    plugins_file plugins.conf
+
+    # HTTP Server
+    # ===========
+    # Enable/Disable the built-in HTTP Server for metrics
+    http_server  Off
+    http_listen  0.0.0.0
+    http_port    2020
+
+    # Storage
+    # =======
+    # Fluent Bit can use memory and filesystem buffering based mechanisms
+    #
+    # - https://docs.fluentbit.io/manual/administration/buffering-and-storage
+    #
+    # storage metrics
+    # ---------------
+    # publish storage pipeline metrics in '/api/v1/storage'. The metrics are
+    # exported only if the 'http_server' option is enabled.
+    #
+    storage.metrics on
+
+    # storage.path
+    # ------------
+    # absolute file system path to store filesystem data buffers (chunks).
+    #
+    # storage.path /tmp/storage
+
+    # storage.sync
+    # ------------
+    # configure the synchronization mode used to store the data into the
+    # filesystem. It can take the values normal or full.
+    #
+    # storage.sync normal
+
+    # storage.checksum
+    # ----------------
+    # enable the data integrity check when writing and reading data from the
+    # filesystem. The storage layer uses the CRC32 algorithm.
+    #
+    # storage.checksum off
+
+    # storage.backlog.mem_limit
+    # -------------------------
+    # if storage.path is set, Fluent Bit will look for data chunks that were
+    # not delivered and are still in the storage layer, these are called
+    # backlog data. This option configure a hint of maximum value of memory
+    # to use when processing these records.
+    #
+    # storage.backlog.mem_limit 5M
+
+[INPUT]
+    name dummy
+    tag  dummy.local
+
+[OUTPUT]
+    name  stdout
+    match *
diff --git a/fluent-bit/conf/fluent-bit-metrics.conf b/fluent-bit/conf/fluent-bit-metrics.conf
new file mode 100644
index 00000000..988e0dcb
--- /dev/null
+++ b/fluent-bit/conf/fluent-bit-metrics.conf
@@ -0,0 +1,27 @@
+# Node Exporter Metrics + Prometheus Exporter
+# -------------------------------------------
+# The following example collect host metrics on Linux and expose
+# them through a Prometheus HTTP end-point.
+#
+# After starting the service try it with:
+#
+# $ curl http://127.0.0.1:2021/metrics
+#
+[SERVICE]
+    flush           1
+    log_level       info
+
+[INPUT]
+    name            node_exporter_metrics
+    tag             node_metrics
+    scrape_interval 2
+
+[OUTPUT]
+    name            prometheus_exporter
+    match           node_metrics
+    listen          0.0.0.0
+    port            2021
+    # Add user-defined labels
+    # -----------------------
+    # add_label       app fluent-bit
+    # add_label       color blue
diff --git a/fluent-bit/conf/fluent-bit-win32.conf b/fluent-bit/conf/fluent-bit-win32.conf
new file mode 100644
index 00000000..a27ac5da
--- /dev/null
+++ b/fluent-bit/conf/fluent-bit-win32.conf
@@ -0,0 +1,91 @@
+[SERVICE]
+    # Flush
+    # =====
+    # set an interval of seconds before to flush records to a destination
+    flush        1
+
+    # Daemon
+    # ======
+    # instruct Fluent Bit to run in foreground or background mode.
+    daemon       Off
+
+    # Log_Level
+    # =========
+    # Set the verbosity level of the service, values can be:
+    #
+    # - error
+    # - warning
+    # - info
+    # - debug
+    # - trace
+    #
+    # by default 'info' is set, that means it includes 'error' and 'warning'.
+    log_level    info
+
+    # Parsers File
+    # ============
+    # specify an optional 'Parsers' configuration file
+    parsers_file parsers.conf
+
+    # Plugins File
+    # ============
+    # specify an optional 'Plugins' configuration file to load external plugins.
+    plugins_file plugins.conf
+
+    # HTTP Server
+    # ===========
+    # Enable/Disable the built-in HTTP Server for metrics
+    http_server  Off
+    http_listen  0.0.0.0
+    http_port    2020
+
+    # Storage
+    # =======
+    # Fluent Bit can use memory and filesystem buffering based mechanisms
+    #
+    # - https://docs.fluentbit.io/manual/administration/buffering-and-storage
+    #
+    # storage metrics
+    # ---------------
+    # publish storage pipeline metrics in '/api/v1/storage'. The metrics are
+    # exported only if the 'http_server' option is enabled.
+    #
+    storage.metrics on
+
+    # storage.path
+    # ------------
+    # absolute file system path to store filesystem data buffers (chunks).
+    #
+    # storage.path /tmp/storage
+
+    # storage.sync
+    # ------------
+    # configure the synchronization mode used to store the data into the
+    # filesystem. It can take the values normal or full.
+    #
+    # storage.sync normal
+
+    # storage.checksum
+    # ----------------
+    # enable the data integrity check when writing and reading data from the
+    # filesystem. The storage layer uses the CRC32 algorithm.
+    #
+    # storage.checksum off
+
+    # storage.backlog.mem_limit
+    # -------------------------
+    # if storage.path is set, Fluent Bit will look for data chunks that were
+    # not delivered and are still in the storage layer, these are called
+    # backlog data. This option configure a hint of maximum value of memory
+    # to use when processing these records.
+    #
+    # storage.backlog.mem_limit 5M
+
+[INPUT]
+    Name         winlog
+    Channels     Setup,Windows PowerShell
+    Interval_Sec 1
+
+[OUTPUT]
+    name  stdout
+    match *
diff --git a/fluent-bit/conf/fluent-bit.conf b/fluent-bit/conf/fluent-bit.conf
new file mode 100644
index 00000000..bf3269f3
--- /dev/null
+++ b/fluent-bit/conf/fluent-bit.conf
@@ -0,0 +1,93 @@
+[SERVICE]
+    # Flush
+    # =====
+    # set an interval of seconds before to flush records to a destination
+    flush        1
+
+    # Daemon
+    # ======
+    # instruct Fluent Bit to run in foreground or background mode.
+    daemon       Off
+
+    # Log_Level
+    # =========
+    # Set the verbosity level of the service, values can be:
+    #
+    # - error
+    # - warning
+    # - info
+    # - debug
+    # - trace
+    #
+    # by default 'info' is set, that means it includes 'error' and 'warning'.
+    log_level    info
+
+    # Parsers File
+    # ============
+    # specify an optional 'Parsers' configuration file
+    parsers_file parsers.conf
+
+    # Plugins File
+    # ============
+    # specify an optional 'Plugins' configuration file to load external plugins.
+    plugins_file plugins.conf
+
+    # HTTP Server
+    # ===========
+    # Enable/Disable the built-in HTTP Server for metrics
+    http_server  Off
+    http_listen  0.0.0.0
+    http_port    2020
+
+    # Storage
+    # =======
+    # Fluent Bit can use memory and filesystem buffering based mechanisms
+    #
+    # - https://docs.fluentbit.io/manual/administration/buffering-and-storage
+    #
+    # storage metrics
+    # ---------------
+    # publish storage pipeline metrics in '/api/v1/storage'. The metrics are
+    # exported only if the 'http_server' option is enabled.
+    #
+    storage.metrics on
+
+    # storage.path
+    # ------------
+    # absolute file system path to store filesystem data buffers (chunks).
+    #
+    # storage.path /tmp/storage
+
+    # storage.sync
+    # ------------
+    # configure the synchronization mode used to store the data into the
+    # filesystem. It can take the values normal or full.
+    #
+    # storage.sync normal
+
+    # storage.checksum
+    # ----------------
+    # enable the data integrity check when writing and reading data from the
+    # filesystem. The storage layer uses the CRC32 algorithm.
+    #
+    # storage.checksum off
+
+    # storage.backlog.mem_limit
+    # -------------------------
+    # if storage.path is set, Fluent Bit will look for data chunks that were
+    # not delivered and are still in the storage layer, these are called
+    # backlog data. This option configure a hint of maximum value of memory
+    # to use when processing these records.
+    #
+    # storage.backlog.mem_limit 5M
+
+[INPUT]
+    name cpu
+    tag  cpu.local
+
+    # Read interval (sec) Default: 1
+    interval_sec 1
+
+[OUTPUT]
+    name  stdout
+    match *
diff --git a/fluent-bit/conf/in_disk.conf b/fluent-bit/conf/in_disk.conf
new file mode 100644
index 00000000..55d0b3cd
--- /dev/null
+++ b/fluent-bit/conf/in_disk.conf
@@ -0,0 +1,61 @@
+[SERVICE]
+    # Flush
+    # =====
+    # Set an interval of seconds before to flush records to a destination
+    Flush        5
+
+    # Daemon
+    # ======
+    # Instruct Fluent Bit to run in foreground or background mode.
+    Daemon       Off
+
+    # Log_Level
+    # =========
+    # Set the verbosity level of the service, values can be:
+    #
+    # - error
+    # - warning
+    # - info
+    # - debug
+    # - trace
+    #
+    # By default 'info' is set, that means it includes 'error' and 'warning'.
+    Log_Level    info
+
+    # HTTP Monitoring Server
+    # ======================
+    #
+    # HTTP_Monitor: enable/disable the HTTP Server to monitor
+    #               Fluent Bit internals.
+    # HTTP_Port   : specify the TCP port of the HTTP Server
+    HTTP_Monitor Off
+    HTTP_Port    2020
+
+# Head Input
+# ==========
+[INPUT]
+    Name disk
+    Tag  disk.all
+
+    # Dev_Name
+    # ====
+    # To limit the target disk/partition.
+    # If not set, the plugin gathers from all of disks and partitions.
+    # Dev_Name sda
+
+    # Total Interval
+    #     = Interval Sec + ( Interval Nsec / 1000 / 1000 / 1000 )
+    #
+    # Interval Sec
+    # ====
+    # Read interval (sec) Default: 1
+    Interval_Sec 1
+
+    # Interval NSec
+    # ====
+    # Read interval (nsec) Default: 0
+    Interval_NSec 0
+
+[OUTPUT]
+    Name  stdout
+    Match disk.*
diff --git a/fluent-bit/conf/in_dummy.conf b/fluent-bit/conf/in_dummy.conf
new file mode 100644
index 00000000..abdb2069
--- /dev/null
+++ b/fluent-bit/conf/in_dummy.conf
@@ -0,0 +1,54 @@
+[SERVICE]
+    # Flush
+    # =====
+    # Set an interval of seconds before to flush records to a destination
+    Flush        5
+
+    # Daemon
+    # ======
+    # Instruct Fluent Bit to run in foreground or background mode.
+    Daemon       Off
+
+    # Log_Level
+    # =========
+    # Set the verbosity level of the service, values can be:
+    #
+    # - error
+    # - warning
+    # - info
+    # - debug
+    # - trace
+    #
+    # By default 'info' is set, that means it includes 'error' and 'warning'.
+    Log_Level    info
+
+    # HTTP Monitoring Server
+    # ======================
+    #
+    # HTTP_Monitor: enable/disable the HTTP Server to monitor
+    #               Fluent Bit internals.
+    # HTTP_Port   : specify the TCP port of the HTTP Server
+    HTTP_Monitor Off
+    HTTP_Port    2020
+
+[INPUT]
+    Name dummy
+    Tag dummy.data
+
+    # Dummy
+    # ====
+    # JSON string.
+    # Default : {"message":"dummy"}
+    Dummy {"this is":"dummy data"}
+
+    # Rate
+    # ====
+    # Rate = Message / second
+    # Default : 1
+    Rate 1
+
+[OUTPUT]
+    Name stdout
+    Match *
+    
+    
\ No newline at end of file
diff --git a/fluent-bit/conf/in_forward.conf b/fluent-bit/conf/in_forward.conf
new file mode 100644
index 00000000..2b40f256
--- /dev/null
+++ b/fluent-bit/conf/in_forward.conf
@@ -0,0 +1,51 @@
+[SERVICE]
+    # Flush
+    # =====
+    # Set an interval of seconds before to flush records to a destination
+    Flush        5
+
+    # Daemon
+    # ======
+    # Instruct Fluent Bit to run in foreground or background mode.
+    Daemon       Off
+
+    # Log_Level
+    # =========
+    # Set the verbosity level of the service, values can be:
+    #
+    # - error
+    # - warning
+    # - info
+    # - debug
+    # - trace
+    #
+    # By default 'info' is set, that means it includes 'error' and 'warning'.
+    Log_Level    info
+
+    # HTTP Monitoring Server
+    # ======================
+    #
+    # HTTP_Monitor: enable/disable the HTTP Server to monitor
+    #               Fluent Bit internals.
+    # HTTP_Port   : specify the TCP port of the HTTP Server
+    HTTP_Monitor Off
+    HTTP_Port    2020
+
+[INPUT]
+    Name forward
+
+    # The Listen interface, by default we listen on all of them
+    Listen 0.0.0.0
+
+    # Default TCP listener port
+    Port 24224
+
+    # Buffer (Kilobytes)
+    # ------------------
+    # Specify the size of the receiver buffer. Incoming records
+    # must be inside this limit. By default 512KB.
+    Buffer 512000
+
+[OUTPUT]
+    Name  stdout
+    Match **
diff --git a/fluent-bit/conf/in_head.conf b/fluent-bit/conf/in_head.conf
new file mode 100644
index 00000000..e3f6ab32
--- /dev/null
+++ b/fluent-bit/conf/in_head.conf
@@ -0,0 +1,86 @@
+[SERVICE]
+    # Flush
+    # =====
+    # Set an interval of seconds before to flush records to a destination
+    Flush        5
+
+    # Daemon
+    # ======
+    # Instruct Fluent Bit to run in foreground or background mode.
+    Daemon       Off
+
+    # Log_Level
+    # =========
+    # Set the verbosity level of the service, values can be:
+    #
+    # - error
+    # - warning
+    # - info
+    # - debug
+    # - trace
+    #
+    # By default 'info' is set, that means it includes 'error' and 'warning'.
+    Log_Level    info
+
+    # HTTP Monitoring Server
+    # ======================
+    #
+    # HTTP_Monitor: enable/disable the HTTP Server to monitor
+    #               Fluent Bit internals.
+    # HTTP_Port   : specify the TCP port of the HTTP Server
+    HTTP_Monitor Off
+    HTTP_Port    2020
+
+# Head Input
+# ==========
+[INPUT]
+    Name head
+    Tag  head.path_to_file
+
+    # File
+    # ====
+    # File path. e.g. /proc/uptime (required)
+    #
+    File    /path/to/file
+
+    # Buf_Size
+    # ====
+    # Buffer size to read file. Default: 256
+    Buf_Size 256
+
+    # Total Interval
+    #     = Interval Sec + ( Interval Nsec / 1000 / 1000 / 1000 )
+    #
+    # Interval Sec
+    # ====
+    # Read interval (sec) Default: 1
+    Interval_Sec 1
+
+    # Interval NSec
+    # ====
+    # Read interval (nsec) Default: 0
+    Interval_NSec 0
+
+    # Add Path
+    # ====
+    # if true, append file path to each record. Default: false
+    Add_Path true
+
+    # Key
+    # ====
+    # Rename key Default: head
+    Key head
+
+    # Lines
+    # ====
+    # Lines to read. If sets, in_head works like 'head -n'
+    Lines 10
+
+    # Split_line
+    # ====
+    # If true, in_head splits lines into k-v pairs
+    Split_line true
+
+[OUTPUT]
+    Name  stdout
+    Match head.*
diff --git a/fluent-bit/conf/in_mqtt.conf b/fluent-bit/conf/in_mqtt.conf
new file mode 100644
index 00000000..3e3bc42e
--- /dev/null
+++ b/fluent-bit/conf/in_mqtt.conf
@@ -0,0 +1,46 @@
+[SERVICE]
+    # Flush
+    # =====
+    # Set an interval of seconds before to flush records to a destination
+    Flush        5
+
+    # Daemon
+    # ======
+    # Instruct Fluent Bit to run in foreground or background mode.
+    Daemon       Off
+
+    # Log_Level
+    # =========
+    # Set the verbosity level of the service, values can be:
+    #
+    # - error
+    # - warning
+    # - info
+    # - debug
+    # - trace
+    #
+    # By default 'info' is set, that means it includes 'error' and 'warning'.
+    Log_Level    info
+
+    # HTTP Monitoring Server
+    # ======================
+    #
+    # HTTP_Monitor: enable/disable the HTTP Server to monitor
+    #               Fluent Bit internals.
+    # HTTP_Port   : specify the TCP port of the HTTP Server
+    HTTP_Monitor Off
+    HTTP_Port    2020
+
+[INPUT]
+    Name mqtt
+    Tag  mqtt.local
+
+    # The Listen interface, by default we listen on all of them
+    Listen 0.0.0.0
+
+    # Default MQTT TCP port
+    Port   1883
+
+[OUTPUT]
+    Name  stdout
+    Match *
diff --git a/fluent-bit/conf/in_netif.conf b/fluent-bit/conf/in_netif.conf
new file mode 100644
index 00000000..dc1299f9
--- /dev/null
+++ b/fluent-bit/conf/in_netif.conf
@@ -0,0 +1,53 @@
+[SERVICE]
+    # Flush
+    # =====
+    # Set an interval of seconds before to flush records to a destination
+    Flush        5
+
+    # Daemon
+    # ======
+    # Instruct Fluent Bit to run in foreground or background mode.
+    Daemon       Off
+
+    # Log_Level
+    # =========
+    # Set the verbosity level of the service, values can be:
+    #
+    # - error
+    # - warning
+    # - info
+    # - debug
+    # - trace
+    #
+    # By default 'info' is set, that means it includes 'error' and 'warning'.
+    Log_Level    info
+
+    # HTTP Monitoring Server
+    # ======================
+    #
+    # HTTP_Monitor: enable/disable the HTTP Server to monitor
+    #               Fluent Bit internals.
+    # HTTP_Port   : specify the TCP port of the HTTP Server
+    HTTP_Monitor Off
+    HTTP_Port    2020
+
+[INPUT]
+    Name netif
+    Tag eth0.traffic
+
+    # Interface
+    # ====
+    # Specify network interface to count packet. Required.
+    Interface eth0
+
+    # Verbose
+    # ====
+    # count up all status.
+    # Default : false
+    Verbose false
+
+[OUTPUT]
+    Name stdout
+    Match *
+    
+    
\ No newline at end of file
diff --git a/fluent-bit/conf/in_proc.conf b/fluent-bit/conf/in_proc.conf
new file mode 100644
index 00000000..f1d742d0
--- /dev/null
+++ b/fluent-bit/conf/in_proc.conf
@@ -0,0 +1,74 @@
+[SERVICE]
+    # Flush
+    # =====
+    # Set an interval of seconds before to flush records to a destination
+    Flush        5
+
+    # Daemon
+    # ======
+    # Instruct Fluent Bit to run in foreground or background mode.
+    Daemon       Off
+
+    # Log_Level
+    # =========
+    # Set the verbosity level of the service, values can be:
+    #
+    # - error
+    # - warning
+    # - info
+    # - debug
+    # - trace
+    #
+    # By default 'info' is set, that means it includes 'error' and 'warning'.
+    Log_Level    info
+
+    # HTTP Monitoring Server
+    # ======================
+    #
+    # HTTP_Monitor: enable/disable the HTTP Server to monitor
+    #               Fluent Bit internals.
+    # HTTP_Port   : specify the TCP port of the HTTP Server
+    HTTP_Monitor Off
+    HTTP_Port    2020
+
+# Head Input
+# ==========
+[INPUT]
+    Name proc
+    Tag  process.fluent-bit
+
+    # Proc_Name
+    # ====
+    # Process Name. e.g. sshd
+    #
+    Proc_Name fluent-bit
+
+
+    # Alert
+    # ====
+    # if true, flush records when process doesn't work
+    # Default : false
+    Alert false
+
+    # Mem
+    # ====
+    # if true, reports memory usage of the process.
+    # Default : true
+    Alert false
+
+    # Total Interval
+    #     = Interval Sec + ( Interval Nsec / 1000 / 1000 / 1000 )
+    #
+    # Interval Sec
+    # ====
+    # Read interval (sec) Default :1
+    Interval_Sec 1
+
+    # Interval NSec
+    # ====
+    # Read interval (nsec) Default :0
+    Interval_NSec 0
+
+[OUTPUT]
+    Name  stdout
+    Match process.*
diff --git a/fluent-bit/conf/in_xbee.conf b/fluent-bit/conf/in_xbee.conf
new file mode 100644
index 00000000..a978ed24
--- /dev/null
+++ b/fluent-bit/conf/in_xbee.conf
@@ -0,0 +1,46 @@
+[SERVICE]
+    # Flush
+    # =====
+    # Set an interval of seconds before to flush records to a destination
+    Flush        5
+
+    # Daemon
+    # ======
+    # Instruct Fluent Bit to run in foreground or background mode.
+    Daemon       Off
+
+    # Log_Level
+    # =========
+    # Set the verbosity level of the service, values can be:
+    #
+    # - error
+    # - warning
+    # - info
+    # - debug
+    # - trace
+    #
+    # By default 'info' is set, that means it includes 'error' and 'warning'.
+    Log_Level trace
+
+# XBee Input
+# ==========
+# This configuration file specify the information to be used
+# when gathering data from XBee input plugin. All key fields
+# in the 'XBEE' section are mandatory.
+[INPUT]
+    Name xbee
+    Tag xbee
+
+    # File
+    # ====
+    # Filename of serial port. e.g. /dev/ttyS0, /dev/ttyAMA0
+    File    /dev/ttyUSB0
+
+    # Baudrate
+    # ========
+    # Specify the bitrate to communicate using the port.
+    Baudrate 9600
+
+[OUTPUT]
+    Name  stdout
+    Match *
diff --git a/fluent-bit/conf/kube.conf b/fluent-bit/conf/kube.conf
new file mode 100644
index 00000000..ab7ef150
--- /dev/null
+++ b/fluent-bit/conf/kube.conf
@@ -0,0 +1,20 @@
+[SERVICE]
+    Flush        1
+    Daemon       Off
+    Log_Level    info
+    Parsers_File parsers.conf
+
+[INPUT]
+    Name          tail
+    Path          /var/log/containers/*.log
+    Parser        docker
+    Tag           kube.*
+    Mem_Buf_Limit 5MB
+
+[FILTER]
+    Name   kubernetes
+    Match  kube.*
+
+[OUTPUT]
+    Name  stdout
+    Match *
diff --git a/fluent-bit/conf/kube_elasticsearch.conf b/fluent-bit/conf/kube_elasticsearch.conf
new file mode 100644
index 00000000..50ca2e10
--- /dev/null
+++ b/fluent-bit/conf/kube_elasticsearch.conf
@@ -0,0 +1,23 @@
+[SERVICE]
+    Flush        5
+    Daemon       Off
+    Log_Level    info
+    Parsers_File parsers.conf
+
+[INPUT]
+    Name          tail
+    Path          /var/log/containers/*.log
+    Parser        docker
+    Tag           kube.*
+    Mem_Buf_Limit 5MB
+
+[FILTER]
+    Name   kubernetes
+    Match  kube.*
+
+[OUTPUT]
+    Name                es
+    Match               *
+    Logstash_Format     On
+    Retry_Limit         False
+    Logstash_Prefix_Key es_index
diff --git a/fluent-bit/conf/out_file.conf b/fluent-bit/conf/out_file.conf
new file mode 100644
index 00000000..a6e4cca7
--- /dev/null
+++ b/fluent-bit/conf/out_file.conf
@@ -0,0 +1,36 @@
+[SERVICE]
+    Flush        5
+    Daemon       Off
+    Log_Level    info
+
+[INPUT]
+    Name mem
+    Tag  mem.usage
+
+# filter_stdout to show streaming data
+[FILTER]
+    Name stdout
+    Match *
+
+# default format : JSON
+[OUTPUT]
+    Name file
+    Match *
+    Path  mem.json
+
+# csv format
+[OUTPUT]
+    Name file
+    Match *
+    Path mem.csv
+    Format csv
+    #Delimiter ,
+
+# ltsv format
+[OUTPUT]
+    Name file
+    Match *
+    Path mem.ltsv
+    Format ltsv
+    #Label_Delimiter :
+    #Delimiter \t
diff --git a/fluent-bit/conf/out_flowcounter.conf b/fluent-bit/conf/out_flowcounter.conf
new file mode 100644
index 00000000..717688fb
--- /dev/null
+++ b/fluent-bit/conf/out_flowcounter.conf
@@ -0,0 +1,39 @@
+[SERVICE]
+    # Flush
+    # =====
+    # Set an interval of seconds before to flush records to a destination
+    Flush 1
+
+    # Log_Level
+    # =========
+    # Set the verbosity level of the service, values can be:
+    #
+    # - error
+    # - warning
+    # - info
+    # - debug
+    # - trace
+    #
+    # By default 'info' is set, that means it includes 'error' and 'warning'.
+    Log_Level   info
+
+[INPUT]
+    Name random
+    Tag  flowcounter_test
+
+# To count records.
+[OUTPUT]
+    Name flowcounter
+
+    # Unit
+    # ====
+    # Unit of measurement.
+    # second/minute/hour/day   Default: minute
+    Unit second
+
+    Match flowcounter_test
+
+# To display records.
+[OUTPUT]
+    Name  stdout
+    Match flowcounter_test
diff --git a/fluent-bit/conf/out_kafka-rest.conf b/fluent-bit/conf/out_kafka-rest.conf
new file mode 100644
index 00000000..5582fa64
--- /dev/null
+++ b/fluent-bit/conf/out_kafka-rest.conf
@@ -0,0 +1,20 @@
+[SERVICE]
+    Flush        1
+    Daemon       Off
+    Log_Level    debug
+
+[INPUT]
+    Name cpu
+
+[OUTPUT]
+    Name            kafka-rest
+    Match           *
+    Host            127.0.0.1
+    Port            8082
+    Time_Key        @timestamp
+    Tag_Key         _fluent-tag
+    Include_Tag_Key On
+    Tag_Key         My_Tag_Key
+    Topic           fluent-bit-test
+    # Partition     0
+    # Message_Key   abc
diff --git a/fluent-bit/conf/out_td.conf b/fluent-bit/conf/out_td.conf
new file mode 100644
index 00000000..ab7bdfa6
--- /dev/null
+++ b/fluent-bit/conf/out_td.conf
@@ -0,0 +1,65 @@
+[SERVICE]
+    # Flush
+    # =====
+    # Set an interval of seconds before to flush records to a destination
+    Flush        5
+
+    # Daemon
+    # ======
+    # Instruct Fluent Bit to run in foreground or background mode.
+    Daemon       Off
+
+    # Log_Level
+    # =========
+    # Set the verbosity level of the service, values can be:
+    #
+    # - error
+    # - warning
+    # - info
+    # - debug
+    # - trace
+    #
+    # By default 'info' is set, that means it includes 'error' and 'warning'.
+    Log_Level    info
+
+    # HTTP Monitoring Server
+    # ======================
+    #
+    # HTTP_Monitor: enable/disable the HTTP Server to monitor
+    #               Fluent Bit internals.
+    # HTTP_Port   : specify the TCP port of the HTTP Server
+    HTTP_Monitor Off
+    HTTP_Port    2020
+
+
+[INPUT]
+    Name cpu
+    Tag  cpu
+
+# TreasureData Output
+# ===================
+# This configuration file specify the information to be used
+# when flushing information to TreasureData.com service. All
+# key fields in the 'TD' section are mandatory.
+[OUTPUT]
+    Name  td
+    Match *
+
+    # API
+    # ===
+    # The TreasureData API key. To obtain this please log into your
+    # TreasureData Console:
+    #
+    # 1. Go to https://console.treasuredata.com/
+    # 2. API Keys box: copy the API key hash
+    API      5a00/e75beccae41e9f83dfa1wa35ddfbb0dcd8a8d980
+
+    # Database
+    # ========
+    # Specify the name of your database, it must exists.
+    Database fluentbit
+
+    # Table
+    # =====
+    # Specify the database table name where the records will be stored
+    Table    cpu_samples
diff --git a/fluent-bit/conf/parser_custom.conf b/fluent-bit/conf/parser_custom.conf
new file mode 100644
index 00000000..51e81985
--- /dev/null
+++ b/fluent-bit/conf/parser_custom.conf
@@ -0,0 +1,15 @@
+ [PARSER]
+      # https://rubular.com/r/6ZCuwV4Xa7nfA3
+      Name                rabbitmq
+      Format              regex
+      Regex               (?<date>[^ ]+)\s(?<time>[^ ]+)\s\[(?<log_level>[^ \]]*)\]\s(?<PID>[^ ]*)\s(?<msg>((([a-zA-Z]*\s+)+[^ ]*)+)+)
+ [PARSER]
+      # https://rubular.com/r/jWfJIOMKr2LgcO
+      Name                neo4j
+      Format              regex
+      Regex               (?<date>[^ ]*) (?<time>[^ ]*) (?<log_level>[^ ]*)\s(?<msg>([^ ]*\s+[^ ]*)+)
+ [PARSER]
+      # https://rubular.com/r/U8VbByp0oRPLU6
+      Name                external-dns
+      Format              regex
+      Regex               ([^ ])\"(?<time>[^ ]+)\"\s([^ ]+)\=(?<log_level>[.+a-zA-Z]+)\s([^ ]+)\"(?<msg>([^ ]*\s+[^ ]*\s[a-zA-Z0-9]*)+)
diff --git a/fluent-bit/conf/parsers.conf b/fluent-bit/conf/parsers.conf
new file mode 100644
index 00000000..71706545
--- /dev/null
+++ b/fluent-bit/conf/parsers.conf
@@ -0,0 +1,126 @@
+[PARSER]
+    Name   apache
+    Format regex
+    Regex  ^(?<host>[^ ]*) [^ ]* (?<user>[^ ]*) \[(?<time>[^\]]*)\] "(?<method>\S+)(?: +(?<path>[^\"]*?)(?: +\S*)?)?" (?<code>[^ ]*) (?<size>[^ ]*)(?: "(?<referer>[^\"]*)" "(?<agent>[^\"]*)")?$
+    Time_Key time
+    Time_Format %d/%b/%Y:%H:%M:%S %z
+
+[PARSER]
+    Name   apache2
+    Format regex
+    Regex  ^(?<host>[^ ]*) [^ ]* (?<user>[^ ]*) \[(?<time>[^\]]*)\] "(?<method>\S+)(?: +(?<path>[^ ]*) +\S*)?" (?<code>[^ ]*) (?<size>[^ ]*)(?: "(?<referer>[^\"]*)" "(?<agent>.*)")?$
+    Time_Key time
+    Time_Format %d/%b/%Y:%H:%M:%S %z
+
+[PARSER]
+    Name   apache_error
+    Format regex
+    Regex  ^\[[^ ]* (?<time>[^\]]*)\] \[(?<level>[^\]]*)\](?: \[pid (?<pid>[^\]]*)\])?( \[client (?<client>[^\]]*)\])? (?<message>.*)$
+
+[PARSER]
+    Name   nginx
+    Format regex
+    Regex ^(?<remote>[^ ]*) (?<host>[^ ]*) (?<user>[^ ]*) \[(?<time>[^\]]*)\] "(?<method>\S+)(?: +(?<path>[^\"]*?)(?: +\S*)?)?" (?<code>[^ ]*) (?<size>[^ ]*)(?: "(?<referer>[^\"]*)" "(?<agent>[^\"]*)")
+    Time_Key time
+    Time_Format %d/%b/%Y:%H:%M:%S %z
+
+[PARSER]
+    # https://rubular.com/r/IhIbCAIs7ImOkc
+    Name        k8s-nginx-ingress
+    Format      regex
+    Regex       ^(?<host>[^ ]*) - (?<user>[^ ]*) \[(?<time>[^\]]*)\] "(?<method>\S+)(?: +(?<path>[^\"]*?)(?: +\S*)?)?" (?<code>[^ ]*) (?<size>[^ ]*) "(?<referer>[^\"]*)" "(?<agent>[^\"]*)" (?<request_length>[^ ]*) (?<request_time>[^ ]*) \[(?<proxy_upstream_name>[^ ]*)\] (\[(?<proxy_alternative_upstream_name>[^ ]*)\] )?(?<upstream_addr>[^ ]*) (?<upstream_response_length>[^ ]*) (?<upstream_response_time>[^ ]*) (?<upstream_status>[^ ]*) (?<reg_id>[^ ]*).*$
+    Time_Key    time
+    Time_Format %d/%b/%Y:%H:%M:%S %z
+
+[PARSER]
+    Name   json
+    Format json
+    Time_Key time
+    Time_Format %d/%b/%Y:%H:%M:%S %z
+
+[PARSER]
+    Name         docker
+    Format       json
+    Time_Key     time
+    Time_Format  %Y-%m-%dT%H:%M:%S.%L
+    Time_Keep    On
+    # --
+    # Since Fluent Bit v1.2, if you are parsing Docker logs and using
+    # the Kubernetes filter, it's not longer required to decode the
+    # 'log' key.
+    #
+    # Command      |  Decoder | Field | Optional Action
+    # =============|==================|=================
+    #Decode_Field_As    json     log
+
+[PARSER]
+    Name        docker-daemon
+    Format      regex
+    Regex       time="(?<time>[^ ]*)" level=(?<level>[^ ]*) msg="(?<msg>[^ ].*)"
+    Time_Key    time
+    Time_Format %Y-%m-%dT%H:%M:%S.%L
+    Time_Keep   On
+
+[PARSER]
+    Name        syslog-rfc5424
+    Format      regex
+    Regex       ^\<(?<pri>[0-9]{1,5})\>1 (?<time>[^ ]+) (?<host>[^ ]+) (?<ident>[^ ]+) (?<pid>[-0-9]+) (?<msgid>[^ ]+) (?<extradata>(\[(.*?)\]|-)) (?<message>.+)$
+    Time_Key    time
+    Time_Format %Y-%m-%dT%H:%M:%S.%L%z
+    Time_Keep   On
+
+[PARSER]
+    Name        syslog-rfc3164-local
+    Format      regex
+    Regex       ^\<(?<pri>[0-9]+)\>(?<time>[^ ]* {1,2}[^ ]* [^ ]*) (?<ident>[a-zA-Z0-9_\/\.\-]*)(?:\[(?<pid>[0-9]+)\])?(?:[^\:]*\:)? *(?<message>.*)$
+    Time_Key    time
+    Time_Format %b %d %H:%M:%S
+    Time_Keep   On
+
+[PARSER]
+    Name        syslog-rfc3164
+    Format      regex
+    Regex       /^\<(?<pri>[0-9]+)\>(?<time>[^ ]* {1,2}[^ ]* [^ ]*) (?<host>[^ ]*) (?<ident>[a-zA-Z0-9_\/\.\-]*)(?:\[(?<pid>[0-9]+)\])?(?:[^\:]*\:)? *(?<message>.*)$/
+    Time_Key    time
+    Time_Format %b %d %H:%M:%S
+    Time_Keep   On
+
+[PARSER]
+    Name    mongodb
+    Format  regex
+    Regex   ^(?<time>[^ ]*)\s+(?<severity>\w)\s+(?<component>[^ ]+)\s+\[(?<context>[^\]]+)]\s+(?<message>.*?) *(?<ms>(\d+))?(:?ms)?$
+    Time_Format %Y-%m-%dT%H:%M:%S.%L
+    Time_Keep   On
+    Time_Key time
+
+[PARSER]
+    # https://rubular.com/r/0VZmcYcLWMGAp1
+    Name    envoy
+    Format  regex
+    Regex ^\[(?<start_time>[^\]]*)\] "(?<method>\S+)(?: +(?<path>[^\"]*?)(?: +\S*)?)? (?<protocol>\S+)" (?<code>[^ ]*) (?<response_flags>[^ ]*) (?<bytes_received>[^ ]*) (?<bytes_sent>[^ ]*) (?<duration>[^ ]*) (?<x_envoy_upstream_service_time>[^ ]*) "(?<x_forwarded_for>[^ ]*)" "(?<user_agent>[^\"]*)" "(?<request_id>[^\"]*)" "(?<authority>[^ ]*)" "(?<upstream_host>[^ ]*)"
+    Time_Format %Y-%m-%dT%H:%M:%S.%L%z
+    Time_Keep   On
+    Time_Key start_time
+
+[PARSER]
+    # https://rubular.com/r/17KGEdDClwiuDG
+    Name    istio-envoy-proxy
+    Format  regex
+    Regex ^\[(?<start_time>[^\]]*)\] "(?<method>\S+)(?: +(?<path>[^\"]*?)(?: +\S*)?)? (?<protocol>\S+)" (?<response_code>[^ ]*) (?<response_flags>[^ ]*) (?<response_code_details>[^ ]*) (?<connection_termination_details>[^ ]*) (?<upstream_transport_failure_reason>[^ ]*) (?<bytes_received>[^ ]*) (?<bytes_sent>[^ ]*) (?<duration>[^ ]*) (?<x_envoy_upstream_service_time>[^ ]*) "(?<x_forwarded_for>[^ ]*)" "(?<user_agent>[^\"]*)" "(?<x_request_id>[^\"]*)" (?<authority>[^ ]*)" "(?<upstream_host>[^ ]*)" (?<upstream_cluster>[^ ]*) (?<upstream_local_address>[^ ]*) (?<downstream_local_address>[^ ]*) (?<downstream_remote_address>[^ ]*) (?<requested_server_name>[^ ]*) (?<route_name>[^  ]*)
+    Time_Format %Y-%m-%dT%H:%M:%S.%L%z
+    Time_Keep   On
+    Time_Key start_time
+
+[PARSER]
+    # http://rubular.com/r/tjUt3Awgg4
+    Name cri
+    Format regex
+    Regex ^(?<time>[^ ]+) (?<stream>stdout|stderr) (?<logtag>[^ ]*) (?<message>.*)$
+    Time_Key    time
+    Time_Format %Y-%m-%dT%H:%M:%S.%L%z
+    Time_Keep   On
+
+[PARSER]
+    Name    kube-custom
+    Format  regex
+    Regex   (?<tag>[^.]+)?\.?(?<pod_name>[a-z0-9](?:[-a-z0-9]*[a-z0-9])?(?:\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*)_(?<namespace_name>[^_]+)_(?<container_name>.+)-(?<docker_id>[a-z0-9]{64})\.log$
diff --git a/fluent-bit/conf/parsers_ambassador.conf b/fluent-bit/conf/parsers_ambassador.conf
new file mode 100644
index 00000000..3ab00d37
--- /dev/null
+++ b/fluent-bit/conf/parsers_ambassador.conf
@@ -0,0 +1,6 @@
+# Ambassador - open source Kubernetes-native API gateway for microservices built on the Envoy Proxy https://www.getambassador.io
+
+[PARSER]
+    Name        ambassador
+    Format      regex
+    Regex       ^(?<type>\S+) \[(?<time>[^\]]*)\] "(?<method>\S+)(?: +(?<path>(?:[^\"]|\\.)*?)(?: +\S*)?) (?<protocol>\S+)?" (?<response_code>\S+) (?<response_flags>\S+) (?<bytes_received>\S+) (?<bytes_sent>\S+) (?<duration>\S+) (?<x_envoy_upstream_service_time>\S+) "(?<x_forwarded_for>[^\"]*)" "(?<user_agent>[^\"]*)" "(?<x_request_id>[^\"]*)" "(?<authority>[^\"]*)" "(?<upstream_host>[^\"]*)"
diff --git a/fluent-bit/conf/parsers_cinder.conf b/fluent-bit/conf/parsers_cinder.conf
new file mode 100644
index 00000000..b67ee99a
--- /dev/null
+++ b/fluent-bit/conf/parsers_cinder.conf
@@ -0,0 +1,10 @@
+
+[PARSER]
+    # http://rubular.com/r/IvZVElTgNl
+    Name ceph
+    Format regex
+    Regex ^(?<log_time>[^ ][-.\d\+:T]+[ ]*[.:\d]*)\s+(?<message>.*)$
+    Time_Format %Y-%m-%d %H:%M:%S.%L
+    Time_Keep Off
+    Time_Key log_time
+
diff --git a/fluent-bit/conf/parsers_extra.conf b/fluent-bit/conf/parsers_extra.conf
new file mode 100644
index 00000000..afe48c1a
--- /dev/null
+++ b/fluent-bit/conf/parsers_extra.conf
@@ -0,0 +1,172 @@
+# Extra set of common parsers
+
+[PARSER]
+    # http://rubular.com/r/cCVd1HLCAO
+    Name crowbar
+    Format regex
+    Regex ^.*\[(?<log_time>[^ ][-.\d\+:]+T[:\d]*)([^\]])*?\]\s+?(?<severity>[^ ]\w+)([\s-]*):?\s+(?<message>.*)
+    Time_Format %Y-%m-%dT%H:%M:%S
+    Time_Keep Off
+    Time_Key log_time
+
+[PARSER]
+    # http://rubular.com/r/frDgnElXW9 
+    Name chefclient
+    Format regex
+    Regex ^\[(?<log_time>[^ ][-.\d\+:]+T[:\d]*)([^\]])*?\]\s+(?<severity>[^ ]\w+):\s+(?<message>.*)$
+    Time_Format %Y-%m-%dT%H:%M:%S
+    Time_Keep Off
+    Time_Key log_time
+
+[PARSER]
+    Name mysql_error
+    Format regex
+    #Regex ^(?<log_time>[^ +][ -:0-9TZ]+|[[:upper:]][[:lower:]]{2})(\+\d+:\d+[TZ]*){0,1}\s*(?<myid>[^ ]\d+)\s+\[(?<severity>[^ ]\w+)\](\s+(?<subsystem>[^ ]\w+):){0,1}\s+(?<message>.*)$
+    Regex ^(?<log_time>[^ +][-\d]+[\ T]*[:\dZ]+)\s*(?<myid>[^ ]\d+)\s+\[(?<severity>[^ ]\w+)\](\s+(?<subsystem>[^ ]\w+):){0,1}\s+(?<message>.*)$
+    Time_Format %Y-%m-%d %H:%M:%S
+    Time_Keep   Off
+    Time_Key log_time
+
+[PARSER]
+    Name mysql_slow
+    Format regex
+    Regex ^# User\@Host:\s+(?<user>[^\@][\w\[\]]+)[@\s]+(?<dbhost>[^ ][-.\w]+)\s+(\[(?<dbhost_address>[.\d]+)\]){0,1}\s+(?<message>.*)$
+
+[PARSER]
+    Name pacemaker
+    Format regex
+    Regex ^\s*(?<log_time>[^ ]* {1,2}[^ ]* [^ ]*) \[(?<pid>\d+)\] (?<node>[\-\w]*)\s*(?<component>\w*):\s+(?<severity>\w+):\s+(?<message>.*)$
+    #Time_Format %Y-%m-%dT%H:%M:%S
+    Time_Format %b %d %H:%M:%S
+    Time_Keep   Off
+    Time_Key log_time
+    #Types pid:integer
+
+[PARSER]
+    Name rabbitmq
+    Format regex
+    Regex ^=(?<severity>[^ ]\w+)\s+REPORT[=\s]*(?<log_time>[^ =][-:.\d\w]+)[\s=]+(?<message>.*)$
+    Time_Format %d-%b-%Y::%H:%M:%S
+    Time_Keep   Off
+    Time_Key log_time
+
+[PARSER]
+    Name http_statement
+    Format regex
+    Regex ^.*((?<req_method>GET|POST|PUT|DELETE|CONNECT|OPTIONS|HEAD[^ ]\w+)\s*(?<req_path>[^ ][-._?=%&\/[:alnum:]]*)\s*(?<req_protocol>[^ ][.\/\dHTFSP]+){0,1})(['"\s]*){0,1}((\s*status:\s*(?<req_status>[^ ]\d+)){0,1}(\s*len:\ (?<req_len>[^ ]\d+)){0,1}(\s*time:\s*(?<req_log_time>[^ ][.\d]+)){0,1}(\s*microversion:\s*(?<req_mver>[^ ][.\d]+)){0,1}){0,1}$
+
+[PARSER]
+    Name universal
+    Format regex
+    Regex ^(?<message>.*)$
+
+[PARSER]
+    Name uuid
+    Format regex
+    Regex (?<uuid>[0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[1-5][0-9a-fA-F]{3}-[89abAB][0-9a-fA-F]{3}-[0-9a-fA-F]{12})
+#UUID v1 :
+#/^[0-9A-F]{8}-[0-9A-F]{4}-[1][0-9A-F]{3}-[89AB][0-9A-F]{3}-[0-9A-F]{12}$/i
+#UUID v2 :
+#/^[0-9A-F]{8}-[0-9A-F]{4}-[2][0-9A-F]{3}-[89AB][0-9A-F]{3}-[0-9A-F]{12}$/i
+#UUID v3 :
+#/^[0-9A-F]{8}-[0-9A-F]{4}-[3][0-9A-F]{3}-[89AB][0-9A-F]{3}-[0-9A-F]{12}$/i
+#UUID v4 :
+#/^[0-9A-F]{8}-[0-9A-F]{4}-[4][0-9A-F]{3}-[89AB][0-9A-F]{3}-[0-9A-F]{12}$/i
+#UUID v5 :
+#/^[0-9A-F]{8}-[0-9A-F]{4}-[5][0-9A-F]{3}-[89AB][0-9A-F]{3}-[0-9A-F]{12}$/i
+
+# Parse IP Tables rules - this one regex should capture pretty much any IP Tables rule and split it into the various fields
+[PARSER]
+    Name iptables
+    Format regex
+    Regex \[(?<rule_chain>\w*)-(?<rule_name>\w*)-(?<accept_or_drop>\w*)\]IN=(?<in_interface>[\w.]+)? OUT=(?<out_interface>[\w.]+)? MAC=(?<mac_address>[\w:]+)? SRC=(?<source>(?:[0-9]{1,3}\.){3}[0-9]{1,3}) DST=(?<dest>(?:[0-9]{1,3}\.){3}[0-9]{1,3}) LEN=(?<pkt_len>\d+) TOS=(?<pkt_tos>[\w\d]+) PREC=(?<pkt_prec>[\w\d]+) TTL=(?<pkt_ttl>\d+) ID=(?<pkt_id>\d+)\s?(?<pkg_frg>[A-Z\s].?)\s?PROTO=(?<protocol>[\w\d]+) (SPT=(?<source_port>.*) DPT=(?<dest_port>.*) (LEN=(?<proto_pkt_len>\w+)?)?(WINDOW=(?<proto_window_size>\d+) RES=(?<pkt_res>\w+)? (?<pkt_type>\w+)\s((?<pkt_flag>\w+)?)\s?URGP=(?<pkg_urgency>\d))? )?(TYPE=(?<pkt_icmp_type>\d+) CODE=(?<pkt_icmp_code>\d+) ID=(?<pkt_icmp_id>\d+) SEQ=(?<pkt_icmp_seq>\d+) )?$
+    Types source_port:integer,dest_port:integer,pkt_ttl:integer,pkt_tos:integer,pkt_len:integer
+
+# Various parsers for Couchbase Server logs
+
+[PARSER]
+    Name         couchbase_json_log_nanoseconds
+    Format       json
+    Time_Key     timestamp
+    Time_Format  %Y-%m-%dT%H:%M:%S.%L
+    Time_Keep    On 
+    # Do not remove the time field from the output we ship
+
+[PARSER]
+    Name         couchbase_rebalance_report
+    Format       json
+    Time_Key     timestamp
+    Time_Format  %Y-%m-%dT%H:%M:%SZ
+    Time_Keep    On 
+
+# The level may have optional brackets around it
+[PARSER]
+    Name         couchbase_simple_log
+    Format       regex
+    Regex        ^(?<timestamp>\d+-\d+-\d+T\d+:\d+:\d+\.\d+(\+|-)\d+:\d+)\s+\[(?<level>\w+)\](?<message>.*)$
+    Time_Key     timestamp
+    Time_Format  %Y-%m-%dT%H:%M:%S.%L%z
+    Time_Keep    On
+
+[PARSER]
+    Name         couchbase_simple_log_space_separated
+    Format       regex
+    Regex        ^(?<timestamp>\d+-\d+-\d+T\d+:\d+:\d+\.\d+(\+|-)\d+:\d+)\s+(?<level>\w+)\s+(?<message>.*)$
+    Time_Key     timestamp
+    Time_Format  %Y-%m-%dT%H:%M:%S.%L%z
+    Time_Keep    On
+
+# Slight change in time format to use Z at end instead of offset:
+# 2021-03-09T17:32:02.136Z INFO ...
+# https://rubular.com/r/EpG3M1dHb5AnTC
+[PARSER]
+    Name         couchbase_simple_log_utc
+    Format       regex
+    Regex        ^(?<timestamp>\d+-\d+-\d+T\d+:\d+:\d+\.\d+Z)\s+(?<level>\w+)(?<message>.*)$
+    Time_Key     timestamp
+    Time_Format  %Y-%m-%dT%H:%M:%S.%LZ
+    Time_Keep    On
+
+# Cope with two different log formats, e.g.:
+# 2021/03/09 17:32:15 cbauth: ...
+# 2021-03-09T17:32:15.303+00:00 [INFO] ...
+# https://rubular.com/r/XUt7xQqEJnrF2M
+[PARSER]
+    Name         couchbase_simple_log_mixed
+    Format       regex
+    Regex        ^(?<timestamp>\d+(-|/)\d+(-|/)\d+(T|\s+)\d+:\d+:\d+(\.\d+(\+|-)\d+:\d+|))\s+((\[)?(?<level>\w+)(\]|:))(?<message>.*)$
+    Time_Key     timestamp
+    Time_Keep    On
+# We cannot parse the time as different formats directly, it could be done downstream and/or left as current time
+
+[PARSER]
+    Name         couchbase_erlang_multiline
+    Format       regex
+    # For some reason this cannot parse an ending close bracket ] followed by a new line immediately
+    #Regex        \[(?<logger>\w+):(?<level>\w+),(?<timestamp>\d+-\d+-\d+T\d+:\d+:\d+.\d+Z),.*\](?<message>.*)$
+    Regex        \[(?<logger>\w+):(?<level>\w+),(?<timestamp>\d+-\d+-\d+T\d+:\d+:\d+.\d+Z),(?<message>.*)$
+    Time_Key     timestamp
+    Time_Format  %Y-%m-%dT%H:%M:%S.%L   
+    Time_Keep    On
+
+# 2021-03-09T17:32:25.339+00:00 INFO CBAS.bootstrap.AnalyticsNCApplication [main] ...
+# https://rubular.com/r/9jh1oKtXBN5GEV
+# Can include an exception stack trace or a thread dump as well but ignoring these for now
+[PARSER]
+    Name         couchbase_java_multiline
+    Format       regex
+    Regex        ^(?<timestamp>\d+-\d+-\d+T\d+:\d+:\d+\.\d+(\+|-)\d+:\d+)\s+(?<level>\w+)\s+(?<class>.*)\s+\[(?<thread>.*)\]\s+(?<message>.*)$
+    Time_Key     timestamp
+    Time_Format  %Y-%m-%dT%H:%M:%S.%L%z
+    Time_Keep    On
+
+# A slight modification of the usual Apache/Apache2 parsers
+[PARSER]
+    Name         couchbase_http
+    Format       regex
+    Regex        ^(?<host>[^ ]*) [^ ]* (?<user>[^ ]*) \[(?<timestamp>[^\]]*)\] "(?<method>\S+)(?: +(?<path>[^ ]*) +\S*)?" (?<code>[^ ]*) (?<size>[^ ]*) - (?<client>.*)$
+    Time_Key     timestamp
+    Time_Format %d/%b/%Y:%H:%M:%S %z
+    Time_Keep    On
+
+# End of Couchbase Server parsers
diff --git a/fluent-bit/conf/parsers_java.conf b/fluent-bit/conf/parsers_java.conf
new file mode 100644
index 00000000..b03729a0
--- /dev/null
+++ b/fluent-bit/conf/parsers_java.conf
@@ -0,0 +1,6 @@
+[PARSER]
+    Name        java_multiline
+    Format      regex
+    Regex       /^(?<time>\d{4}-\d{1,2}-\d{1,2} \d{1,2}:\d{1,2}:\d{1,2}) \[(?<thread>.*)\] (?<level>[^\s]+)(?<message>.*)/
+    Time_Key    time
+    Time_Format %Y-%m-%d %H:%M:%S
diff --git a/fluent-bit/conf/parsers_kafka.conf b/fluent-bit/conf/parsers_kafka.conf
new file mode 100644
index 00000000..db4384a6
--- /dev/null
+++ b/fluent-bit/conf/parsers_kafka.conf
@@ -0,0 +1,16 @@
+[PARSER]
+    # Confluent Schema Registry 7.1.1 default format
+    Name confluent-schema-registry
+    Format regex
+    Time_Key time
+    Time_Format %Y-%m-%d %H:%M:%S,%L
+    Regex ^\[(?<time>\d{4}-\d{1,2}-\d{1,2} \d{2}:\d{2}:\d{2},\d{1,4})] (?<level>[A-Z]{1,8}) (?<src>[\d.]+) - - \[(?<date>.*)] \"(?<method>[A-Z]+) (?<path>\/[\S]+|\/) (?<http_version>HTTP\/[\d]\.[\d])\" (?<code>[\d]{1,3}) (?<size>[\d]+) \"-\" \"(?<agent>.*)\" (?<extra_info>.*)
+
+
+[PARSER]
+    # Confluent Schema Registry 7.1.1 default format - with _sr_ prefix to allow `nest`
+    Name confluent-schema-registry-prefixed
+    Format regex
+    Time_Key _sr_time
+    Time_Format %Y-%m-%d %H:%M:%S,%L
+    Regex ^\[(?<_sr_time>\d{4}-\d{1,2}-\d{1,2} \d{2}:\d{2}:\d{2},\d{1,4})] (?<_sr_level>[A-Z]{1,8}) (?<_sr_src>[\d.]+) - - \[(?<_sr_date>.*)] \"(?<_sr_method>[A-Z]+) (?<_sr_path>\/[\S]+|\/) (?<_sr_http_version>HTTP\/[\d]\.[\d])\" (?<_sr_code>[\d]{1,3}) (?<_sr_size>[\d]+) \"-\" \"(?<_sr_agent>.*)\" (?<_sr_extra_info>.*)
diff --git a/fluent-bit/conf/parsers_mult.conf b/fluent-bit/conf/parsers_mult.conf
new file mode 100644
index 00000000..af9025f4
--- /dev/null
+++ b/fluent-bit/conf/parsers_mult.conf
@@ -0,0 +1,26 @@
+[PARSER]
+    Name        mult_first
+    Format      regex
+    Regex       Started (?<method>[^ ]+) "(?<path>[^"]+)" for (?<host>[^ ]+) at (?<time>[^ ]+ [^ ]+ [^ ]+)
+    Time_Key    time
+    Time_Format %Y-%m-%d %H:%M:%S %z
+
+[PARSER]
+    Name        mult_1
+    Format      regex
+    Regex       /Processing by (?<controller>[^\u0023]+)\u0023(?<controller_method>[^ ]+) as (?<format>[^ ]+?)$/
+
+[PARSER]
+    Name        mult_2
+    Format      regex
+    Regex       (  Parameters: (?<parameters>[^ ]+))?
+
+[PARSER]
+    Name        mult_3
+    Format      regex
+    Regex       /  Rendered (?<template>[^ ]+) within (?<layout>.+) \([\d\.]+ms\)/
+
+[PARSER]
+    Name        mult_4
+    Format      regex
+    Regex       Completed (?<code>[^ ]+) [^ ]+ in (?<runtime>[\d\.]+)ms \(Views: (?<view_runtime>[\d\.]+)ms \| ActiveRecord: (?<ar_runtime>[\d\.]+)ms\)
diff --git a/fluent-bit/conf/parsers_multiline.conf b/fluent-bit/conf/parsers_multiline.conf
new file mode 100644
index 00000000..8ac34806
--- /dev/null
+++ b/fluent-bit/conf/parsers_multiline.conf
@@ -0,0 +1,6 @@
+[MULTILINE_PARSER]
+    name          exception_test
+    type          regex
+    flush_timeout 1000
+    rule          "start_state"  "/(Dec \d+ \d+\:\d+\:\d+)(.*)/" "cont"
+    rule          "cont" "/^\s+at.*/" "cont"
diff --git a/fluent-bit/conf/parsers_openstack.conf b/fluent-bit/conf/parsers_openstack.conf
new file mode 100644
index 00000000..e1bbc803
--- /dev/null
+++ b/fluent-bit/conf/parsers_openstack.conf
@@ -0,0 +1,53 @@
+# Example openstack parsers, see source for recent updates:
+# https://github.com/salt-formulas/salt-formula-fluentbit/tree/master/metadata/service/config/parser
+
+# Take these parsers as an example, as they may not fully fit all possible
+# openstack deployments from all vendors, etc..
+
+[PARSER]
+    Name cinder
+    Format regex
+    Regex ^(?<log_time>[^ ][-.\d\+:T]+[ ]*[.:\d]*)\s+(?<pid>[^ ]\d+)\s+(?<severity>[^ ][.-_\w]+)\s+(?<component>[^ ][.-_\w]+)(\s+\[(-|(?<req_id>[^ ][-\w]*) (?<req_user>[^ ][-\w]*) (?<req_project>[^ ][-\w]*) (?<req_domain>[^ ][-\w]*) (?<req_user_domain>[^ ][-\w]*) (?<req_project_domain>[^ ][-\w]*))\]){1}\s+(?<message>.*)$
+    Time_Format %Y-%m-%d %H:%M:%S.%L
+    Time_Keep   Off
+    Time_Key log_time
+
+[PARSER]
+    Name glance
+    Format regex
+    Regex ^(?<log_time>[^ ][-.\d\+:T]+[ ]*[.:\d]*)\s+(?<pid>[^ ]\d+)\s+(?<severity>[^ ][.-_\w]+)\s+(?<component>[^ ][.-_\w]+)(\s+\[(-|(?<req_id>[^ ][-\w]*) (?<req_user>[^ ][-\w]*) (?<req_project>[^ ][-\w]*) (?<req_domain>[^ ][-\w]*) (?<req_user_domain>[^ ][-\w]*) (?<req_project_domain>[^ ][-\w]*))\]){1}\s+(?<message>.*)$
+    Time_Format %Y-%m-%d %H:%M:%S.%L
+    Time_Keep   Off
+    Time_Key log_time
+
+[PARSER]
+    Name heat
+    Format regex
+    Regex ^(?<log_time>[^ ][-.\d\+:T]+[ ]*[.:\d]*)\s+(?<pid>[^ ]\d+)\s+(?<severity>[^ ][.-_\w]+)\s+(?<component>[^ ][.-_\w]+)(\s+\[(-|(?<req_id>[^ ][-\w]*) (?<req_user>[^ ][-\w]*) (?<req_project>[^ ][-\w]*) (?<req_domain>[^ ][-\w]*) (?<req_user_domain>[^ ][-\w]*) (?<req_project_domain>[^ ][-\w]*))\]){1}\s+(?<message>.*)$
+    Time_Format %Y-%m-%d %H:%M:%S.%L
+    Time_Keep   Off
+    Time_Key log_time
+
+[PARSER]
+    Name keystone
+    Format regex
+    Regex ^(?<log_time>[^ ][-.\d\+:T]+[ ]*[.:\d]*)\s+(?<pid>[^ ]\d+)\s+(?<severity>[^ ][.-_\w]+)\s+(?<component>[^ ][.-_\w]+)(\s+\[(-|(?<req_id>[^ ][-\w]*) (?<req_user>[^ ][-\w]*) (?<req_project>[^ ][-\w]*) (?<req_domain>[^ ][-\w]*) (?<req_user_domain>[^ ][-\w]*) (?<req_project_domain>[^ ][-\w]*))\]){1}\s+(?<message>.*)$
+    Time_Format %Y-%m-%d %H:%M:%S.%L
+    Time_Keep   Off
+    Time_Key log_time
+
+[PARSER]
+    Name neutron
+    Format regex
+    Regex ^(?<log_time>[^ ][-.\d\+:T]+[ ]*[.:\d]*)\s+(?<pid>[^ ]\d+)\s+(?<severity>[^ ][.-_\w]+)\s+(?<component>[^ ][.-_\w]+)(\s+\[(-|(?<req_id>[^ ][-\w]*) (?<req_user>[^ ][-\w]*) (?<req_project>[^ ][-\w]*) (?<req_domain>[^ ][-\w]*) (?<req_user_domain>[^ ][-\w]*) (?<req_project_domain>[^ ][-\w]*))\]){1}\s+(?<message>.*)$
+    Time_Format %Y-%m-%d %H:%M:%S.%L
+    Time_Keep   Off
+    Time_Key log_time
+
+[PARSER]
+    Name nova
+    Format regex
+    Regex ^(?<log_time>[^ ][-.\d\+:T]+[ ]*[.:\d]*)\s+(?<pid>[^ ]\d+)\s+(?<severity>[^ ][.-_\w]+)\s+(?<component>[^ ][.-_\w]+)(\s+\[(-|(?<req_id>[^ ][-\w]*) (?<req_user>[^ ][-\w]*) (?<req_project>[^ ][-\w]*) (?<req_domain>[^ ][-\w]*) (?<req_user_domain>[^ ][-\w]*) (?<req_project_domain>[^ ][-\w]*))\]){1}\s+(?<message>.*)$
+    Time_Format %Y-%m-%d %H:%M:%S.%L
+    Time_Keep   Off
+    Time_Key log_time
diff --git a/fluent-bit/conf/plugins.conf b/fluent-bit/conf/plugins.conf
new file mode 100644
index 00000000..55c5a8d3
--- /dev/null
+++ b/fluent-bit/conf/plugins.conf
@@ -0,0 +1,2 @@
+[PLUGINS]
+    # Path /path/to/out_gstdout.so
diff --git a/fluent-bit/conf/rate_limit.conf b/fluent-bit/conf/rate_limit.conf
new file mode 100644
index 00000000..9fdc8311
--- /dev/null
+++ b/fluent-bit/conf/rate_limit.conf
@@ -0,0 +1,25 @@
+[SERVICE]
+    Flush        1
+    Daemon       Off
+    Log_Level    info
+    Parsers_File parsers.conf
+
+[INPUT]
+    Name          tail
+    Path          /var/log/containers/*.log
+    Parser        docker
+    Tag           kube.*
+    Mem_Buf_Limit 5MB
+
+[FILTER]
+    Name   kubernetes
+    Match  kube.*
+# This filter calls the rate limit script
+[FILTER]
+    Name   lua
+    Match  kube.*
+    script rate_limit.lua
+    call   rate_limit
+[OUTPUT]
+    Name  stdout
+    Match *
\ No newline at end of file