diff options
Diffstat (limited to '')
-rw-r--r-- | collectors/charts.d.plugin/apcupsd/apcupsd.chart.sh | 305 |
1 files changed, 305 insertions, 0 deletions
diff --git a/collectors/charts.d.plugin/apcupsd/apcupsd.chart.sh b/collectors/charts.d.plugin/apcupsd/apcupsd.chart.sh new file mode 100644 index 00000000..da9cd19c --- /dev/null +++ b/collectors/charts.d.plugin/apcupsd/apcupsd.chart.sh @@ -0,0 +1,305 @@ +# shellcheck shell=bash +# no need for shebang - this file is loaded from charts.d.plugin +# SPDX-License-Identifier: GPL-3.0-or-later + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2016 Costa Tsaousis <costa@tsaousis.gr> +# + +apcupsd_ip= +apcupsd_port= + +declare -A apcupsd_sources=( + ["local"]="127.0.0.1:3551" +) + +# how frequently to collect UPS data +apcupsd_update_every=10 + +apcupsd_timeout=3 + +# the priority of apcupsd related to other charts +apcupsd_priority=90000 + +apcupsd_get() { + run -t $apcupsd_timeout apcaccess status "$1" +} + +is_ups_alive() { + local status + status="$(apcupsd_get "$1" | sed -e 's/STATUS.*: //' -e 't' -e 'd')" + case "$status" in + "" | "COMMLOST" | "SHUTTING DOWN") return 1 ;; + *) return 0 ;; + esac +} + +apcupsd_check() { + + # this should return: + # - 0 to enable the chart + # - 1 to disable the chart + + require_cmd apcaccess || return 1 + + # backwards compatibility + if [ "${apcupsd_ip}:${apcupsd_port}" != ":" ]; then + apcupsd_sources["local"]="${apcupsd_ip}:${apcupsd_port}" + fi + + local host working=0 failed=0 + for host in "${!apcupsd_sources[@]}"; do + apcupsd_get "${apcupsd_sources[${host}]}" >/dev/null + # shellcheck disable=2181 + if [ $? -ne 0 ]; then + error "cannot get information for apcupsd server ${host} on ${apcupsd_sources[${host}]}." + failed=$((failed + 1)) + else + if ! is_ups_alive ${apcupsd_sources[${host}]}; then + error "APC UPS ${host} on ${apcupsd_sources[${host}]} is not online." + failed=$((failed + 1)) + else + working=$((working + 1)) + fi + fi + done + + if [ ${working} -eq 0 ]; then + error "No APC UPSes found available." + return 1 + fi + + return 0 +} + +apcupsd_create() { + local host + for host in "${!apcupsd_sources[@]}"; do + # create the charts + cat <<EOF +CHART apcupsd_${host}.charge '' "UPS Charge" "percentage" ups apcupsd.charge area $((apcupsd_priority + 2)) $apcupsd_update_every '' '' 'apcupsd' +DIMENSION battery_charge charge absolute 1 100 + +CHART apcupsd_${host}.battery_voltage '' "UPS Battery Voltage" "Volts" ups apcupsd.battery.voltage line $((apcupsd_priority + 4)) $apcupsd_update_every '' '' 'apcupsd' +DIMENSION battery_voltage voltage absolute 1 100 +DIMENSION battery_voltage_nominal nominal absolute 1 100 + +CHART apcupsd_${host}.input_voltage '' "UPS Input Voltage" "Volts" input apcupsd.input.voltage line $((apcupsd_priority + 5)) $apcupsd_update_every '' '' 'apcupsd' +DIMENSION input_voltage voltage absolute 1 100 +DIMENSION input_voltage_min min absolute 1 100 +DIMENSION input_voltage_max max absolute 1 100 + +CHART apcupsd_${host}.input_frequency '' "UPS Input Frequency" "Hz" input apcupsd.input.frequency line $((apcupsd_priority + 6)) $apcupsd_update_every '' '' 'apcupsd' +DIMENSION input_frequency frequency absolute 1 100 + +CHART apcupsd_${host}.output_voltage '' "UPS Output Voltage" "Volts" output apcupsd.output.voltage line $((apcupsd_priority + 7)) $apcupsd_update_every '' '' 'apcupsd' +DIMENSION output_voltage voltage absolute 1 100 +DIMENSION output_voltage_nominal nominal absolute 1 100 + +CHART apcupsd_${host}.load '' "UPS Load" "percentage" ups apcupsd.load area $((apcupsd_priority)) $apcupsd_update_every '' '' 'apcupsd' +DIMENSION load load absolute 1 100 + +CHART apcupsd_${host}.load_usage '' "UPS Load Usage" "Watts" ups apcupsd.load_usage area $((apcupsd_priority + 1)) $apcupsd_update_every '' '' 'apcupsd' +DIMENSION load_usage load absolute 1 100 + +CHART apcupsd_${host}.temp '' "UPS Temperature" "Celsius" ups apcupsd.temperature line $((apcupsd_priority + 8)) $apcupsd_update_every '' '' 'apcupsd' +DIMENSION temp temp absolute 1 100 + +CHART apcupsd_${host}.time '' "UPS Time Remaining" "Minutes" ups apcupsd.time area $((apcupsd_priority + 3)) $apcupsd_update_every '' '' 'apcupsd' +DIMENSION time time absolute 1 100 + +CHART apcupsd_${host}.online '' "UPS ONLINE flag" "boolean" ups apcupsd.online line $((apcupsd_priority + 9)) $apcupsd_update_every '' '' 'apcupsd' +DIMENSION online online absolute 1 1 + +CHART apcupsd_${host}.selftest '' "UPS Self-Test status" "status" ups apcupsd.selftest line $((apcupsd_priority + 10)) $apcupsd_update_every '' '' 'apcupsd' +DIMENSION selftest_OK 'OK' absolute 1 1 +DIMENSION selftest_NO 'NO' absolute 1 1 +DIMENSION selftest_BT 'BT' absolute 1 1 +DIMENSION selftest_NG 'NG' absolute 1 1 + +CHART apcupsd_${host}.status '' "UPS Status" "status" ups apcupsd.status line $((apcupsd_priority + 11)) $apcupsd_update_every '' '' 'apcupsd' +DIMENSION status_ONLINE 'ONLINE' absolute 1 1 +DIMENSION status_ONBATT 'ONBATT' absolute 1 1 +DIMENSION status_OVERLOAD 'OVERLOAD' absolute 1 1 +DIMENSION status_LOWBATT 'LOWBATT' absolute 1 1 +DIMENSION status_REPLACEBATT 'REPLACEBATT' absolute 1 1 +DIMENSION status_NOBATT 'NOBATT' absolute 1 1 +DIMENSION status_SLAVE 'SLAVE' absolute 1 1 +DIMENSION status_SLAVEDOWN 'SLAVEDOWN' absolute 1 1 +DIMENSION status_COMMLOST 'COMMLOST' absolute 1 1 +DIMENSION status_CAL 'CAL' absolute 1 1 +DIMENSION status_TRIM 'TRIM' absolute 1 1 +DIMENSION status_BOOST 'BOOST' absolute 1 1 +DIMENSION status_SHUTTING_DOWN 'SHUTTING_DOWN' absolute 1 1 + +EOF + done + return 0 +} + +apcupsd_update() { + # the first argument to this function is the microseconds since last update + # pass this parameter to the BEGIN statement (see below). + + # do all the work to collect / calculate the values + # for each dimension + # remember: KEEP IT SIMPLE AND SHORT + + local host working=0 failed=0 + for host in "${!apcupsd_sources[@]}"; do + apcupsd_get "${apcupsd_sources[${host}]}" | awk " + +BEGIN { + battery_charge = 0; + battery_voltage = 0; + battery_voltage_nominal = 0; + input_voltage = 0; + input_voltage_min = 0; + input_voltage_max = 0; + input_frequency = 0; + output_voltage = 0; + output_voltage_nominal = 0; + load = 0; + temp = 0; + time = 0; + nompower = 0; + load_usage = 0; + selftest_OK = 0; + selftest_NO = 0; + selftest_BT = 0; + selftest_NG = 0; + status_ONLINE = 0; + status_CAL = 0; + status_TRIM = 0; + status_BOOST = 0; + status_ONBATT = 0; + status_OVERLOAD = 0; + status_LOWBATT = 0; + status_REPLACEBATT = 0; + status_NOBATT = 0; + status_SLAVE = 0; + status_SLAVEDOWN = 0; + status_COMMLOST = 0; + status_SHUTTING_DOWN = 0; + +} +/^BCHARGE.*/ { battery_charge = \$3 * 100 }; +/^BATTV.*/ { battery_voltage = \$3 * 100 }; +/^NOMBATTV.*/ { battery_voltage_nominal = \$3 * 100 }; +/^LINEV.*/ { input_voltage = \$3 * 100 }; +/^MINLINEV.*/ { input_voltage_min = \$3 * 100 }; +/^MAXLINEV.*/ { input_voltage_max = \$3 * 100 }; +/^LINEFREQ.*/ { input_frequency = \$3 * 100 }; +/^OUTPUTV.*/ { output_voltage = \$3 * 100 }; +/^NOMOUTV.*/ { output_voltage_nominal = \$3 * 100 }; +/^LOADPCT.*/ { load = \$3 * 100 }; +/^ITEMP.*/ { temp = \$3 * 100 }; +/^NOMPOWER.*/ { nompower = \$3 }; +/^TIMELEFT.*/ { time = \$3 * 100 }; +/^STATUS.*/ { online=(\$3 != \"COMMLOST\" && !(\$3 == \"SHUTTING\" && \$4 == \"DOWN\"))?1:0; }; +/^SELFTEST.*/ { selftest_OK = (\$3 == \"OK\") ? 1 : 0; + selftest_NO = (\$3 == \"NO\") ? 1 : 0; + selftest_BT = (\$3 == \"BT\") ? 1 : 0; + selftest_NG = (\$3 == \"NG\") ? 1 : 0; + }; +/^STATUS.*/ { status_ONLINE = (\$3 == \"ONLINE\") ? 1 : 0; + status_CAL = (\$3 == \"CAL\") ? 1 : 0; + status_TRIM = (\$3 == \"TRIM\") ? 1 : 0; + status_BOOST = (\$3 == \"BOOST\") ? 1 : 0; + status_ONBATT = (\$3 == \"ONBATT\") ? 1 : 0; + status_OVERLOAD = (\$3 == \"OVERLOAD\") ? 1 : 0; + status_LOWBATT = (\$3 == \"LOWBATT\") ? 1 : 0; + status_REPLACEBATT = (\$3 == \"REPLACEBATT\") ? 1 : 0; + status_NOBATT = (\$3 == \"NOBATT\") ? 1 : 0; + status_SLAVE = (\$3 == \"SLAVE\") ? 1 : 0; + status_SLAVEDOWN = (\$3 == \"SLAVEDOWN\") ? 1 : 0; + status_COMMLOST = (\$3 == \"COMMLOST\") ? 1 : 0; + status_SHUTTING_DOWN = (\$3 == \"SHUTTING\" && \$4 == \"DOWN\") ? 1 : 0; + }; + +END { + { load_usage = nompower * load / 100 }; + + print \"BEGIN apcupsd_${host}.online $1\"; + print \"SET online = \" online; + print \"END\" + + if (online == 1) { + print \"BEGIN apcupsd_${host}.charge $1\"; + print \"SET battery_charge = \" battery_charge; + print \"END\" + + print \"BEGIN apcupsd_${host}.battery_voltage $1\"; + print \"SET battery_voltage = \" battery_voltage; + print \"SET battery_voltage_nominal = \" battery_voltage_nominal; + print \"END\" + + print \"BEGIN apcupsd_${host}.input_voltage $1\"; + print \"SET input_voltage = \" input_voltage; + print \"SET input_voltage_min = \" input_voltage_min; + print \"SET input_voltage_max = \" input_voltage_max; + print \"END\" + + print \"BEGIN apcupsd_${host}.input_frequency $1\"; + print \"SET input_frequency = \" input_frequency; + print \"END\" + + print \"BEGIN apcupsd_${host}.output_voltage $1\"; + print \"SET output_voltage = \" output_voltage; + print \"SET output_voltage_nominal = \" output_voltage_nominal; + print \"END\" + + print \"BEGIN apcupsd_${host}.load $1\"; + print \"SET load = \" load; + print \"END\" + + print \"BEGIN apcupsd_${host}.load_usage $1\"; + print \"SET load_usage = \" load_usage; + print \"END\" + + print \"BEGIN apcupsd_${host}.temp $1\"; + print \"SET temp = \" temp; + print \"END\" + + print \"BEGIN apcupsd_${host}.time $1\"; + print \"SET time = \" time; + print \"END\" + + print \"BEGIN apcupsd_${host}.selftest $1\"; + print \"SET selftest_OK = \" selftest_OK; + print \"SET selftest_NO = \" selftest_NO; + print \"SET selftest_BT = \" selftest_BT; + print \"SET selftest_NG = \" selftest_NG; + print \"END\" + + print \"BEGIN apcupsd_${host}.status $1\"; + print \"SET status_ONLINE = \" status_ONLINE; + print \"SET status_ONBATT = \" status_ONBATT; + print \"SET status_OVERLOAD = \" status_OVERLOAD; + print \"SET status_LOWBATT = \" status_LOWBATT; + print \"SET status_REPLACEBATT = \" status_REPLACEBATT; + print \"SET status_NOBATT = \" status_NOBATT; + print \"SET status_SLAVE = \" status_SLAVE; + print \"SET status_SLAVEDOWN = \" status_SLAVEDOWN; + print \"SET status_COMMLOST = \" status_COMMLOST; + print \"SET status_CAL = \" status_CAL; + print \"SET status_TRIM = \" status_TRIM; + print \"SET status_BOOST = \" status_BOOST; + print \"SET status_SHUTTING_DOWN = \" status_SHUTTING_DOWN; + print \"END\"; + } +}" + # shellcheck disable=SC2181 + if [ $? -ne 0 ]; then + failed=$((failed + 1)) + error "failed to get values for APC UPS ${host} on ${apcupsd_sources[${host}]}" && return 1 + else + working=$((working + 1)) + fi + done + + [ $working -eq 0 ] && error "failed to get values from all APC UPSes" && return 1 + + return 0 +} |