diff options
Diffstat (limited to 'exporting/prometheus/metadata.yaml')
| -rw-r--r-- | exporting/prometheus/metadata.yaml | 436 |
1 files changed, 436 insertions, 0 deletions
diff --git a/exporting/prometheus/metadata.yaml b/exporting/prometheus/metadata.yaml new file mode 100644 index 00000000..906d8ea3 --- /dev/null +++ b/exporting/prometheus/metadata.yaml @@ -0,0 +1,436 @@ +# yamllint disable rule:line-length +--- +- &promexport + id: 'export-prometheus-remote' + meta: &meta + name: 'Prometheus Remote Write' + link: 'https://prometheus.io/docs/operating/integrations/#remote-endpoints-and-storage' + categories: + - export + icon_filename: 'prometheus.svg' + keywords: + - exporter + - Prometheus + - remote write + - time series + overview: + exporter_description: | + Use the Prometheus remote write exporting connector to archive your Netdata metrics to the external storage provider of your choice for long-term storage and further analysis. + exporter_limitations: 'The remote write exporting connector does not support buffer on failures.' + setup: + prerequisites: + list: + - title: '' + description: | + - Netdata and the external storage provider of your choice, installed, configured and operational. + - `protobuf` and `snappy` libraries installed. + - Netdata reinstalled after the libraries. + configuration: + file: + name: 'exporting.conf' + options: + description: 'The following options can be defined for this exporter.' + folding: + title: 'Config options' + enabled: true + list: + - name: 'enabled' + default_value: 'no' + description: 'Enables or disables an exporting connector instance (yes|no).' + required: true + - name: 'destination' + default_value: 'no' + description: 'Accepts a space separated list of hostnames, IPs (IPv4 and IPv6) and ports to connect to. Netdata will use the first available to send the metrics.' + required: true + detailed_description: | + The format of each item in this list, is: [PROTOCOL:]IP[:PORT]. + - PROTOCOL can be udp or tcp. tcp is the default and only supported by the current exporting engine. + - IP can be XX.XX.XX.XX (IPv4), or [XX:XX...XX:XX] (IPv6). For IPv6 you can to enclose the IP in [] to separate it from the port. + - PORT can be a number of a service name. If omitted, the default port for the exporting connector will be used. + + Example IPv4: + ```yaml + destination = 10.11.14.2:2003 10.11.14.3:4242 10.11.14.4:2003 + ``` + Example IPv6 and IPv4 together: + ```yaml + destination = [ffff:...:0001]:2003 10.11.12.1:2003 + ``` + When multiple servers are defined, Netdata will try the next one when the previous one fails. + - name: 'username' + default_value: 'my_username' + description: 'Username for HTTP authentication' + required: false + - name: 'password' + default_value: 'my_password' + description: 'Password for HTTP authentication' + required: false + - name: 'data source' + default_value: '' + description: 'Selects the kind of data that will be sent to the external database. (as collected|average|sum)' + required: false + - name: 'hostname' + default_value: '[global].hostname' + description: 'The hostname to be used for sending data to the external database server.' + required: false + - name: 'prefix' + default_value: 'netdata' + description: 'The prefix to add to all metrics.' + required: false + - name: 'update every' + default_value: '10' + description: | + Frequency of sending sending data to the external database, in seconds. + required: false + detailed_description: | + Netdata will add some randomness to this number, to prevent stressing the external server when many Netdata servers + send data to the same database. This randomness does not affect the quality of the data, only the time they are sent. + - name: 'buffer on failures' + default_value: '10' + description: | + The number of iterations (`update every` seconds) to buffer data, when the external database server is not available. + required: false + detailed_description: | + If the server fails to receive the data after that many failures, data loss on the connector instance is expected (Netdata will also log it). + - name: 'timeout ms' + default_value: '20000' + description: 'The timeout in milliseconds to wait for the external database server to process the data.' + required: false + - name: 'send hosts matching' + default_value: 'localhost *' + description: | + Hosts filter. Determines which hosts will be sent to the external database. The syntax is [simple patterns](https://github.com/netdata/netdata/tree/master/libnetdata/simple_pattern#simple-patterns). + required: false + detailed_description: | + Includes one or more space separated patterns, using * as wildcard (any number of times within each pattern). + The patterns are checked against the hostname (the localhost is always checked as localhost), allowing us to + filter which hosts will be sent to the external database when this Netdata is a central Netdata aggregating multiple hosts. + + A pattern starting with `!` gives a negative match. So to match all hosts named `*db*` except hosts containing `*child*`, + use `!*child* *db*` (so, the order is important: the first pattern matching the hostname will be used - positive or negative). + - name: 'send charts matching' + default_value: '*' + description: | + One or more space separated patterns (use * as wildcard) checked against both chart id and chart name. + required: false + detailed_description: | + A pattern starting with ! gives a negative match. So to match all charts named apps.* except charts ending in *reads, + use !*reads apps.* (so, the order is important: the first pattern matching the chart id or the chart name will be used, + positive or negative). There is also a URL parameter filter that can be used while querying allmetrics. The URL parameter + has a higher priority than the configuration option. + - name: 'send names instead of ids' + default_value: '' + description: 'Controls the metric names Netdata should send to the external database (yes|no).' + required: false + detailed_description: | + Netdata supports names and IDs for charts and dimensions. Usually IDs are unique identifiers as read by the system and names + are human friendly labels (also unique). Most charts and metrics have the same ID and name, but in several cases they are + different : disks with device-mapper, interrupts, QoS classes, statsd synthetic charts, etc. + - name: 'send configured labels' + default_value: '' + description: 'Controls if host labels defined in the `[host labels]` section in `netdata.conf` should be sent to the external database (yes|no).' + required: false + - name: 'send automatic labels' + default_value: '' + description: 'Controls if automatically created labels, like `_os_name` or `_architecture` should be sent to the external database (yes|no).' + required: false + examples: + folding: + enabled: true + title: '' + list: + - name: 'Example configuration' + folding: + enabled: false + description: 'Basic example configuration for Prometheus remote write.' + config: | + [prometheus_remote_write:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + - name: 'Example configuration with HTTPS and HTTP authentication' + folding: + enabled: false + description: 'Add `:https` modifier to the connector type if you need to use the TLS/SSL protocol. For example: `remote_write:https:my_instance`.' + config: | + [prometheus_remote_write:https:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + username = my_username + password = my_password +- <<: *promexport + id: 'export-appoptics' + meta: + <<: *meta + name: AppOptics + link: https://www.solarwinds.com/appoptics + icon_filename: 'solarwinds.svg' + keywords: + - app optics + - AppOptics + - Solarwinds +- <<: *promexport + id: 'export-azure-data' + meta: + <<: *meta + name: Azure Data Explorer + link: https://azure.microsoft.com/en-us/pricing/details/data-explorer/ + icon_filename: 'azuredataex.jpg' + keywords: + - Azure Data Explorer + - Azure +- <<: *promexport + id: 'export-azure-event' + meta: + <<: *meta + name: Azure Event Hub + link: https://learn.microsoft.com/en-us/azure/event-hubs/event-hubs-about + icon_filename: 'azureeventhub.png' + keywords: + - Azure Event Hub + - Azure +- <<: *promexport + id: 'export-newrelic' + meta: + <<: *meta + name: New Relic + link: https://newrelic.com/ + icon_filename: 'newrelic.svg' + keywords: + - export + - NewRelic + - prometheus + - remote write +- <<: *promexport + id: 'export-quasar' + meta: + <<: *meta + name: QuasarDB + link: https://doc.quasar.ai/master/ + icon_filename: 'quasar.jpeg' + keywords: + - export + - quasar + - quasarDB + - prometheus + - remote write +- <<: *promexport + id: 'export-splunk' + meta: + <<: *meta + name: Splunk SignalFx + link: https://www.splunk.com/en_us/products/observability.html + icon_filename: 'splunk.svg' + keywords: + - export + - splunk + - signalfx + - prometheus + - remote write +- <<: *promexport + id: 'export-tikv' + meta: + <<: *meta + name: TiKV + link: https://tikv.org/ + icon_filename: 'tikv.png' + keywords: + - export + - TiKV + - prometheus + - remote write +- <<: *promexport + id: 'export-thanos' + meta: + <<: *meta + name: Thanos + link: https://thanos.io/ + icon_filename: 'thanos.png' + keywords: + - export + - thanos + - prometheus + - remote write +- <<: *promexport + id: 'export-victoria' + meta: + <<: *meta + name: VictoriaMetrics + link: https://victoriametrics.com/products/open-source/ + icon_filename: 'victoriametrics.png' + keywords: + - export + - victoriametrics + - prometheus + - remote write +- <<: *promexport + id: 'export-vmware' + meta: + <<: *meta + name: VMware Aria + link: https://www.vmware.com/products/aria-operations-for-applications.html + icon_filename: 'aria.png' + keywords: + - export + - VMware + - Aria + - Tanzu + - prometheus + - remote write +- <<: *promexport + id: 'export-chronix' + meta: + <<: *meta + name: Chronix + link: https://dbdb.io/db/chronix + icon_filename: 'chronix.png' + keywords: + - export + - chronix + - prometheus + - remote write +- <<: *promexport + id: 'export-cortex' + meta: + <<: *meta + name: Cortex + link: https://cortexmetrics.io/ + icon_filename: 'cortex.png' + keywords: + - export + - cortex + - prometheus + - remote write +- <<: *promexport + id: 'export-crate' + meta: + <<: *meta + name: CrateDB + link: https://crate.io/ + icon_filename: 'crate.svg' + keywords: + - export + - CrateDB + - prometheus + - remote write +- <<: *promexport + id: 'export-elastic' + meta: + <<: *meta + name: ElasticSearch + link: https://www.elastic.co/ + icon_filename: 'elasticsearch.svg' + keywords: + - export + - ElasticSearch + - prometheus + - remote write +- <<: *promexport + id: 'export-gnocchi' + meta: + <<: *meta + name: Gnocchi + link: https://wiki.openstack.org/wiki/Gnocchi + icon_filename: 'gnocchi.svg' + keywords: + - export + - Gnocchi + - prometheus + - remote write +- <<: *promexport + id: 'export-bigquery' + meta: + <<: *meta + name: Google BigQuery + link: https://cloud.google.com/bigquery/ + icon_filename: 'bigquery.png' + keywords: + - export + - Google BigQuery + - prometheus + - remote write +- <<: *promexport + id: 'export-irondb' + meta: + <<: *meta + name: IRONdb + link: https://docs.circonus.com/irondb/ + icon_filename: 'irondb.png' + keywords: + - export + - IRONdb + - prometheus + - remote write +- <<: *promexport + id: 'export-kafka' + meta: + <<: *meta + name: Kafka + link: https://kafka.apache.org/ + icon_filename: 'kafka.svg' + keywords: + - export + - Kafka + - prometheus + - remote write +- <<: *promexport + id: 'export-m3db' + meta: + <<: *meta + name: M3DB + link: https://m3db.io/ + icon_filename: 'm3db.png' + keywords: + - export + - M3DB + - prometheus + - remote write +- <<: *promexport + id: 'export-metricfire' + meta: + <<: *meta + name: MetricFire + link: https://www.metricfire.com/ + icon_filename: 'metricfire.png' + keywords: + - export + - MetricFire + - prometheus + - remote write +- <<: *promexport + id: 'export-pgsql' + meta: + <<: *meta + name: PostgreSQL + link: https://www.postgresql.org/ + icon_filename: 'postgres.svg' + keywords: + - export + - PostgreSQL + - prometheus + - remote write +- <<: *promexport + id: 'export-wavefront' + meta: + <<: *meta + name: Wavefront + link: https://docs.wavefront.com/wavefront_data_ingestion.html + icon_filename: 'wavefront.png' + keywords: + - export + - Wavefront + - prometheus + - remote write +- <<: *promexport + id: 'export-timescaledb' + meta: + <<: *meta + name: TimescaleDB + link: https://www.timescale.com/ + icon_filename: 'timescale.png' + keywords: + - export + - TimescaleDB + - prometheus + - remote write |