From be1c7e50e1e8809ea56f2c9d472eccd8ffd73a97 Mon Sep 17 00:00:00 2001
From: Daniel Baumann <daniel.baumann@progress-linux.org>
Date: Fri, 19 Apr 2024 04:57:58 +0200
Subject: Adding upstream version 1.44.3.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
---
 collectors/python.d.plugin/w1sensor/metadata.yaml | 119 ++++++++++++++++++++++
 1 file changed, 119 insertions(+)
 create mode 100644 collectors/python.d.plugin/w1sensor/metadata.yaml

(limited to 'collectors/python.d.plugin/w1sensor/metadata.yaml')

diff --git a/collectors/python.d.plugin/w1sensor/metadata.yaml b/collectors/python.d.plugin/w1sensor/metadata.yaml
new file mode 100644
index 00000000..7b076823
--- /dev/null
+++ b/collectors/python.d.plugin/w1sensor/metadata.yaml
@@ -0,0 +1,119 @@
+plugin_name: python.d.plugin
+modules:
+  - meta:
+      plugin_name: python.d.plugin
+      module_name: w1sensor
+      monitored_instance:
+        name: 1-Wire Sensors
+        link: "https://www.analog.com/en/product-category/1wire-temperature-sensors.html"
+        categories:
+          - data-collection.hardware-devices-and-sensors
+        icon_filename: "1-wire.png"
+      related_resources:
+        integrations:
+          list: []
+      info_provided_to_referring_integrations:
+        description: ""
+      keywords:
+        - temperature
+        - sensor
+        - 1-wire
+      most_popular: false
+    overview:
+      data_collection:
+        metrics_description: "Monitor 1-Wire Sensors metrics with Netdata for optimal environmental conditions monitoring. Enhance your environmental monitoring with real-time insights and alerts."
+        method_description: "The collector uses the wire, w1_gpio, and w1_therm kernel modules. Currently temperature sensors are supported and automatically detected."
+      supported_platforms:
+        include:
+          - Linux
+        exclude: []
+      multi_instance: true
+      additional_permissions:
+        description: ""
+      default_behavior:
+        auto_detection:
+          description: "The collector will try to auto detect available 1-Wire devices."
+        limits:
+          description: ""
+        performance_impact:
+          description: ""
+    setup:
+      prerequisites:
+        list:
+          - title: "Required Linux kernel modules"
+            description: "Make sure `wire`, `w1_gpio`, and `w1_therm` kernel modules are loaded."
+      configuration:
+        file:
+          name: python.d/w1sensor.conf
+        options:
+          description: |
+            There are 2 sections:
+            
+            * Global variables
+            * One or more JOBS that can define multiple different instances to monitor.
+            
+            The following options can be defined globally: priority, penalty, autodetection_retry, update_every, but can also be defined per JOB to override the global values.
+            
+            Additionally, the following collapsed table contains all the options that can be configured inside a JOB definition.
+            
+            Every configuration JOB starts with a `job_name` value which will appear in the dashboard, unless a `name` parameter is specified.
+          folding:
+            title: "Config options"
+            enabled: true
+          list:
+            - name: update_every
+              description: Sets the default data collection frequency.
+              default_value: 5
+              required: false
+            - name: priority
+              description: Controls the order of charts at the netdata dashboard.
+              default_value: 60000
+              required: false
+            - name: autodetection_retry
+              description: Sets the job re-check interval in seconds.
+              default_value: 0
+              required: false
+            - name: penalty
+              description: Indicates whether to apply penalty to update_every in case of failures.
+              default_value: yes
+              required: false
+            - name: name
+              description: Job name. This value will overwrite the `job_name` value. JOBS with the same name are mutually exclusive. Only one of them will be allowed running at any time. This allows autodetection to try several alternatives and pick the one that works.
+              default_value: ""
+              required: false
+            - name: name_<1-Wire id>
+              description: This allows associating a human readable name with a sensor's 1-Wire identifier.
+              default_value: ""
+              required: false
+        examples:
+          folding:
+            enabled: false
+            title: "Config"
+          list:
+            - name: Provide human readable names
+              description: Associate two 1-Wire identifiers with human readable names.
+              config: |
+                sensors:
+                 name_00000022276e: 'Machine room'
+                 name_00000022298f: 'Rack 12'
+    troubleshooting:
+      problems:
+        list: []
+    alerts: []
+    metrics:
+      folding:
+        title: Metrics
+        enabled: false
+      description: ""
+      availability: []
+      scopes:
+        - name: global
+          description: "These metrics refer to the entire monitored application."
+          labels: []
+          metrics:
+            - name: w1sensor.temp
+              description: 1-Wire Temperature Sensor
+              unit: "Celsius"
+              chart_type: line
+              dimensions:
+                - name: a dimension per sensor
-- 
cgit v1.2.3