From be1c7e50e1e8809ea56f2c9d472eccd8ffd73a97 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Fri, 19 Apr 2024 04:57:58 +0200 Subject: Adding upstream version 1.44.3. Signed-off-by: Daniel Baumann --- exporting/prometheus/integrations/appoptics.md | 158 +++++++++++++++++++++ .../prometheus/integrations/azure_data_explorer.md | 158 +++++++++++++++++++++ .../prometheus/integrations/azure_event_hub.md | 158 +++++++++++++++++++++ exporting/prometheus/integrations/chronix.md | 158 +++++++++++++++++++++ exporting/prometheus/integrations/cortex.md | 158 +++++++++++++++++++++ exporting/prometheus/integrations/cratedb.md | 158 +++++++++++++++++++++ exporting/prometheus/integrations/elasticsearch.md | 158 +++++++++++++++++++++ exporting/prometheus/integrations/gnocchi.md | 158 +++++++++++++++++++++ .../prometheus/integrations/google_bigquery.md | 158 +++++++++++++++++++++ exporting/prometheus/integrations/irondb.md | 158 +++++++++++++++++++++ exporting/prometheus/integrations/kafka.md | 158 +++++++++++++++++++++ exporting/prometheus/integrations/m3db.md | 158 +++++++++++++++++++++ exporting/prometheus/integrations/metricfire.md | 158 +++++++++++++++++++++ exporting/prometheus/integrations/new_relic.md | 158 +++++++++++++++++++++ exporting/prometheus/integrations/postgresql.md | 158 +++++++++++++++++++++ .../integrations/prometheus_remote_write.md | 158 +++++++++++++++++++++ exporting/prometheus/integrations/quasardb.md | 158 +++++++++++++++++++++ .../prometheus/integrations/splunk_signalfx.md | 158 +++++++++++++++++++++ exporting/prometheus/integrations/thanos.md | 158 +++++++++++++++++++++ exporting/prometheus/integrations/tikv.md | 158 +++++++++++++++++++++ exporting/prometheus/integrations/timescaledb.md | 158 +++++++++++++++++++++ .../prometheus/integrations/victoriametrics.md | 158 +++++++++++++++++++++ exporting/prometheus/integrations/vmware_aria.md | 158 +++++++++++++++++++++ exporting/prometheus/integrations/wavefront.md | 158 +++++++++++++++++++++ 24 files changed, 3792 insertions(+) create mode 100644 exporting/prometheus/integrations/appoptics.md create mode 100644 exporting/prometheus/integrations/azure_data_explorer.md create mode 100644 exporting/prometheus/integrations/azure_event_hub.md create mode 100644 exporting/prometheus/integrations/chronix.md create mode 100644 exporting/prometheus/integrations/cortex.md create mode 100644 exporting/prometheus/integrations/cratedb.md create mode 100644 exporting/prometheus/integrations/elasticsearch.md create mode 100644 exporting/prometheus/integrations/gnocchi.md create mode 100644 exporting/prometheus/integrations/google_bigquery.md create mode 100644 exporting/prometheus/integrations/irondb.md create mode 100644 exporting/prometheus/integrations/kafka.md create mode 100644 exporting/prometheus/integrations/m3db.md create mode 100644 exporting/prometheus/integrations/metricfire.md create mode 100644 exporting/prometheus/integrations/new_relic.md create mode 100644 exporting/prometheus/integrations/postgresql.md create mode 100644 exporting/prometheus/integrations/prometheus_remote_write.md create mode 100644 exporting/prometheus/integrations/quasardb.md create mode 100644 exporting/prometheus/integrations/splunk_signalfx.md create mode 100644 exporting/prometheus/integrations/thanos.md create mode 100644 exporting/prometheus/integrations/tikv.md create mode 100644 exporting/prometheus/integrations/timescaledb.md create mode 100644 exporting/prometheus/integrations/victoriametrics.md create mode 100644 exporting/prometheus/integrations/vmware_aria.md create mode 100644 exporting/prometheus/integrations/wavefront.md (limited to 'exporting/prometheus/integrations') diff --git a/exporting/prometheus/integrations/appoptics.md b/exporting/prometheus/integrations/appoptics.md new file mode 100644 index 00000000..29293320 --- /dev/null +++ b/exporting/prometheus/integrations/appoptics.md @@ -0,0 +1,158 @@ + + +# AppOptics + + + + + +Use the Prometheus remote write exporting connector to archive your Netdata metrics to the external storage provider of your choice for long-term storage and further analysis. + + + + +## Limitations + +The remote write exporting connector does not support buffer on failures. + + +## Setup + +### Prerequisites + +#### + +- Netdata and the external storage provider of your choice, installed, configured and operational. +- `protobuf` and `snappy` libraries installed. +- Netdata reinstalled after the libraries. + + + +### Configuration + +#### File + +The configuration file name for this integration is `exporting.conf`. + + +You can edit the configuration file using the `edit-config` script from the +Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#the-netdata-config-directory). + +```bash +cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata +sudo ./edit-config exporting.conf +``` +#### Options + +The following options can be defined for this exporter. + +
Config options + +| Name | Description | Default | Required | +|:----|:-----------|:-------|:--------:| +| enabled | Enables or disables an exporting connector instance (yes/no). | no | yes | +| destination | Accepts a space separated list of hostnames, IPs (IPv4 and IPv6) and ports to connect to. Netdata will use the first available to send the metrics. | no | yes | +| username | Username for HTTP authentication | my_username | no | +| password | Password for HTTP authentication | my_password | no | +| data source | Selects the kind of data that will be sent to the external database. (as collected/average/sum) | | no | +| hostname | The hostname to be used for sending data to the external database server. | [global].hostname | no | +| prefix | The prefix to add to all metrics. | netdata | no | +| update every | Frequency of sending sending data to the external database, in seconds. | 10 | no | +| buffer on failures | The number of iterations (`update every` seconds) to buffer data, when the external database server is not available. | 10 | no | +| timeout ms | The timeout in milliseconds to wait for the external database server to process the data. | 20000 | no | +| send hosts matching | Hosts filter. Determines which hosts will be sent to the external database. The syntax is [simple patterns](https://github.com/netdata/netdata/tree/master/libnetdata/simple_pattern#simple-patterns). | localhost * | no | +| send charts matching | One or more space separated patterns (use * as wildcard) checked against both chart id and chart name. | * | no | +| send names instead of ids | Controls the metric names Netdata should send to the external database (yes/no). | | no | +| send configured labels | Controls if host labels defined in the `[host labels]` section in `netdata.conf` should be sent to the external database (yes/no). | | no | +| send automatic labels | Controls if automatically created labels, like `_os_name` or `_architecture` should be sent to the external database (yes/no). | | no | + +##### destination + +The format of each item in this list, is: [PROTOCOL:]IP[:PORT]. +- PROTOCOL can be udp or tcp. tcp is the default and only supported by the current exporting engine. +- IP can be XX.XX.XX.XX (IPv4), or [XX:XX...XX:XX] (IPv6). For IPv6 you can to enclose the IP in [] to separate it from the port. +- PORT can be a number of a service name. If omitted, the default port for the exporting connector will be used. + +Example IPv4: + ```yaml + destination = 10.11.14.2:2003 10.11.14.3:4242 10.11.14.4:2003 + ``` +Example IPv6 and IPv4 together: +```yaml +destination = [ffff:...:0001]:2003 10.11.12.1:2003 +``` +When multiple servers are defined, Netdata will try the next one when the previous one fails. + + +##### update every + +Netdata will add some randomness to this number, to prevent stressing the external server when many Netdata servers +send data to the same database. This randomness does not affect the quality of the data, only the time they are sent. + + +##### buffer on failures + +If the server fails to receive the data after that many failures, data loss on the connector instance is expected (Netdata will also log it). + + +##### send hosts matching + +Includes one or more space separated patterns, using * as wildcard (any number of times within each pattern). +The patterns are checked against the hostname (the localhost is always checked as localhost), allowing us to +filter which hosts will be sent to the external database when this Netdata is a central Netdata aggregating multiple hosts. + +A pattern starting with `!` gives a negative match. So to match all hosts named `*db*` except hosts containing `*child*`, +use `!*child* *db*` (so, the order is important: the first pattern matching the hostname will be used - positive or negative). + + +##### send charts matching + +A pattern starting with ! gives a negative match. So to match all charts named apps.* except charts ending in *reads, +use !*reads apps.* (so, the order is important: the first pattern matching the chart id or the chart name will be used, +positive or negative). There is also a URL parameter filter that can be used while querying allmetrics. The URL parameter +has a higher priority than the configuration option. + + +##### send names instead of ids + +Netdata supports names and IDs for charts and dimensions. Usually IDs are unique identifiers as read by the system and names +are human friendly labels (also unique). Most charts and metrics have the same ID and name, but in several cases they are +different : disks with device-mapper, interrupts, QoS classes, statsd synthetic charts, etc. + + +
+ +#### Examples + +##### Example configuration + +Basic example configuration for Prometheus remote write. + +```yaml +[prometheus_remote_write:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + +``` +##### Example configuration with HTTPS and HTTP authentication + +Add `:https` modifier to the connector type if you need to use the TLS/SSL protocol. For example: `remote_write:https:my_instance`. + +```yaml +[prometheus_remote_write:https:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + username = my_username + password = my_password + +``` + diff --git a/exporting/prometheus/integrations/azure_data_explorer.md b/exporting/prometheus/integrations/azure_data_explorer.md new file mode 100644 index 00000000..aa8710aa --- /dev/null +++ b/exporting/prometheus/integrations/azure_data_explorer.md @@ -0,0 +1,158 @@ + + +# Azure Data Explorer + + + + + +Use the Prometheus remote write exporting connector to archive your Netdata metrics to the external storage provider of your choice for long-term storage and further analysis. + + + + +## Limitations + +The remote write exporting connector does not support buffer on failures. + + +## Setup + +### Prerequisites + +#### + +- Netdata and the external storage provider of your choice, installed, configured and operational. +- `protobuf` and `snappy` libraries installed. +- Netdata reinstalled after the libraries. + + + +### Configuration + +#### File + +The configuration file name for this integration is `exporting.conf`. + + +You can edit the configuration file using the `edit-config` script from the +Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#the-netdata-config-directory). + +```bash +cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata +sudo ./edit-config exporting.conf +``` +#### Options + +The following options can be defined for this exporter. + +
Config options + +| Name | Description | Default | Required | +|:----|:-----------|:-------|:--------:| +| enabled | Enables or disables an exporting connector instance (yes/no). | no | yes | +| destination | Accepts a space separated list of hostnames, IPs (IPv4 and IPv6) and ports to connect to. Netdata will use the first available to send the metrics. | no | yes | +| username | Username for HTTP authentication | my_username | no | +| password | Password for HTTP authentication | my_password | no | +| data source | Selects the kind of data that will be sent to the external database. (as collected/average/sum) | | no | +| hostname | The hostname to be used for sending data to the external database server. | [global].hostname | no | +| prefix | The prefix to add to all metrics. | netdata | no | +| update every | Frequency of sending sending data to the external database, in seconds. | 10 | no | +| buffer on failures | The number of iterations (`update every` seconds) to buffer data, when the external database server is not available. | 10 | no | +| timeout ms | The timeout in milliseconds to wait for the external database server to process the data. | 20000 | no | +| send hosts matching | Hosts filter. Determines which hosts will be sent to the external database. The syntax is [simple patterns](https://github.com/netdata/netdata/tree/master/libnetdata/simple_pattern#simple-patterns). | localhost * | no | +| send charts matching | One or more space separated patterns (use * as wildcard) checked against both chart id and chart name. | * | no | +| send names instead of ids | Controls the metric names Netdata should send to the external database (yes/no). | | no | +| send configured labels | Controls if host labels defined in the `[host labels]` section in `netdata.conf` should be sent to the external database (yes/no). | | no | +| send automatic labels | Controls if automatically created labels, like `_os_name` or `_architecture` should be sent to the external database (yes/no). | | no | + +##### destination + +The format of each item in this list, is: [PROTOCOL:]IP[:PORT]. +- PROTOCOL can be udp or tcp. tcp is the default and only supported by the current exporting engine. +- IP can be XX.XX.XX.XX (IPv4), or [XX:XX...XX:XX] (IPv6). For IPv6 you can to enclose the IP in [] to separate it from the port. +- PORT can be a number of a service name. If omitted, the default port for the exporting connector will be used. + +Example IPv4: + ```yaml + destination = 10.11.14.2:2003 10.11.14.3:4242 10.11.14.4:2003 + ``` +Example IPv6 and IPv4 together: +```yaml +destination = [ffff:...:0001]:2003 10.11.12.1:2003 +``` +When multiple servers are defined, Netdata will try the next one when the previous one fails. + + +##### update every + +Netdata will add some randomness to this number, to prevent stressing the external server when many Netdata servers +send data to the same database. This randomness does not affect the quality of the data, only the time they are sent. + + +##### buffer on failures + +If the server fails to receive the data after that many failures, data loss on the connector instance is expected (Netdata will also log it). + + +##### send hosts matching + +Includes one or more space separated patterns, using * as wildcard (any number of times within each pattern). +The patterns are checked against the hostname (the localhost is always checked as localhost), allowing us to +filter which hosts will be sent to the external database when this Netdata is a central Netdata aggregating multiple hosts. + +A pattern starting with `!` gives a negative match. So to match all hosts named `*db*` except hosts containing `*child*`, +use `!*child* *db*` (so, the order is important: the first pattern matching the hostname will be used - positive or negative). + + +##### send charts matching + +A pattern starting with ! gives a negative match. So to match all charts named apps.* except charts ending in *reads, +use !*reads apps.* (so, the order is important: the first pattern matching the chart id or the chart name will be used, +positive or negative). There is also a URL parameter filter that can be used while querying allmetrics. The URL parameter +has a higher priority than the configuration option. + + +##### send names instead of ids + +Netdata supports names and IDs for charts and dimensions. Usually IDs are unique identifiers as read by the system and names +are human friendly labels (also unique). Most charts and metrics have the same ID and name, but in several cases they are +different : disks with device-mapper, interrupts, QoS classes, statsd synthetic charts, etc. + + +
+ +#### Examples + +##### Example configuration + +Basic example configuration for Prometheus remote write. + +```yaml +[prometheus_remote_write:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + +``` +##### Example configuration with HTTPS and HTTP authentication + +Add `:https` modifier to the connector type if you need to use the TLS/SSL protocol. For example: `remote_write:https:my_instance`. + +```yaml +[prometheus_remote_write:https:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + username = my_username + password = my_password + +``` + diff --git a/exporting/prometheus/integrations/azure_event_hub.md b/exporting/prometheus/integrations/azure_event_hub.md new file mode 100644 index 00000000..bc8a0c9e --- /dev/null +++ b/exporting/prometheus/integrations/azure_event_hub.md @@ -0,0 +1,158 @@ + + +# Azure Event Hub + + + + + +Use the Prometheus remote write exporting connector to archive your Netdata metrics to the external storage provider of your choice for long-term storage and further analysis. + + + + +## Limitations + +The remote write exporting connector does not support buffer on failures. + + +## Setup + +### Prerequisites + +#### + +- Netdata and the external storage provider of your choice, installed, configured and operational. +- `protobuf` and `snappy` libraries installed. +- Netdata reinstalled after the libraries. + + + +### Configuration + +#### File + +The configuration file name for this integration is `exporting.conf`. + + +You can edit the configuration file using the `edit-config` script from the +Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#the-netdata-config-directory). + +```bash +cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata +sudo ./edit-config exporting.conf +``` +#### Options + +The following options can be defined for this exporter. + +
Config options + +| Name | Description | Default | Required | +|:----|:-----------|:-------|:--------:| +| enabled | Enables or disables an exporting connector instance (yes/no). | no | yes | +| destination | Accepts a space separated list of hostnames, IPs (IPv4 and IPv6) and ports to connect to. Netdata will use the first available to send the metrics. | no | yes | +| username | Username for HTTP authentication | my_username | no | +| password | Password for HTTP authentication | my_password | no | +| data source | Selects the kind of data that will be sent to the external database. (as collected/average/sum) | | no | +| hostname | The hostname to be used for sending data to the external database server. | [global].hostname | no | +| prefix | The prefix to add to all metrics. | netdata | no | +| update every | Frequency of sending sending data to the external database, in seconds. | 10 | no | +| buffer on failures | The number of iterations (`update every` seconds) to buffer data, when the external database server is not available. | 10 | no | +| timeout ms | The timeout in milliseconds to wait for the external database server to process the data. | 20000 | no | +| send hosts matching | Hosts filter. Determines which hosts will be sent to the external database. The syntax is [simple patterns](https://github.com/netdata/netdata/tree/master/libnetdata/simple_pattern#simple-patterns). | localhost * | no | +| send charts matching | One or more space separated patterns (use * as wildcard) checked against both chart id and chart name. | * | no | +| send names instead of ids | Controls the metric names Netdata should send to the external database (yes/no). | | no | +| send configured labels | Controls if host labels defined in the `[host labels]` section in `netdata.conf` should be sent to the external database (yes/no). | | no | +| send automatic labels | Controls if automatically created labels, like `_os_name` or `_architecture` should be sent to the external database (yes/no). | | no | + +##### destination + +The format of each item in this list, is: [PROTOCOL:]IP[:PORT]. +- PROTOCOL can be udp or tcp. tcp is the default and only supported by the current exporting engine. +- IP can be XX.XX.XX.XX (IPv4), or [XX:XX...XX:XX] (IPv6). For IPv6 you can to enclose the IP in [] to separate it from the port. +- PORT can be a number of a service name. If omitted, the default port for the exporting connector will be used. + +Example IPv4: + ```yaml + destination = 10.11.14.2:2003 10.11.14.3:4242 10.11.14.4:2003 + ``` +Example IPv6 and IPv4 together: +```yaml +destination = [ffff:...:0001]:2003 10.11.12.1:2003 +``` +When multiple servers are defined, Netdata will try the next one when the previous one fails. + + +##### update every + +Netdata will add some randomness to this number, to prevent stressing the external server when many Netdata servers +send data to the same database. This randomness does not affect the quality of the data, only the time they are sent. + + +##### buffer on failures + +If the server fails to receive the data after that many failures, data loss on the connector instance is expected (Netdata will also log it). + + +##### send hosts matching + +Includes one or more space separated patterns, using * as wildcard (any number of times within each pattern). +The patterns are checked against the hostname (the localhost is always checked as localhost), allowing us to +filter which hosts will be sent to the external database when this Netdata is a central Netdata aggregating multiple hosts. + +A pattern starting with `!` gives a negative match. So to match all hosts named `*db*` except hosts containing `*child*`, +use `!*child* *db*` (so, the order is important: the first pattern matching the hostname will be used - positive or negative). + + +##### send charts matching + +A pattern starting with ! gives a negative match. So to match all charts named apps.* except charts ending in *reads, +use !*reads apps.* (so, the order is important: the first pattern matching the chart id or the chart name will be used, +positive or negative). There is also a URL parameter filter that can be used while querying allmetrics. The URL parameter +has a higher priority than the configuration option. + + +##### send names instead of ids + +Netdata supports names and IDs for charts and dimensions. Usually IDs are unique identifiers as read by the system and names +are human friendly labels (also unique). Most charts and metrics have the same ID and name, but in several cases they are +different : disks with device-mapper, interrupts, QoS classes, statsd synthetic charts, etc. + + +
+ +#### Examples + +##### Example configuration + +Basic example configuration for Prometheus remote write. + +```yaml +[prometheus_remote_write:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + +``` +##### Example configuration with HTTPS and HTTP authentication + +Add `:https` modifier to the connector type if you need to use the TLS/SSL protocol. For example: `remote_write:https:my_instance`. + +```yaml +[prometheus_remote_write:https:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + username = my_username + password = my_password + +``` + diff --git a/exporting/prometheus/integrations/chronix.md b/exporting/prometheus/integrations/chronix.md new file mode 100644 index 00000000..9794a624 --- /dev/null +++ b/exporting/prometheus/integrations/chronix.md @@ -0,0 +1,158 @@ + + +# Chronix + + + + + +Use the Prometheus remote write exporting connector to archive your Netdata metrics to the external storage provider of your choice for long-term storage and further analysis. + + + + +## Limitations + +The remote write exporting connector does not support buffer on failures. + + +## Setup + +### Prerequisites + +#### + +- Netdata and the external storage provider of your choice, installed, configured and operational. +- `protobuf` and `snappy` libraries installed. +- Netdata reinstalled after the libraries. + + + +### Configuration + +#### File + +The configuration file name for this integration is `exporting.conf`. + + +You can edit the configuration file using the `edit-config` script from the +Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#the-netdata-config-directory). + +```bash +cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata +sudo ./edit-config exporting.conf +``` +#### Options + +The following options can be defined for this exporter. + +
Config options + +| Name | Description | Default | Required | +|:----|:-----------|:-------|:--------:| +| enabled | Enables or disables an exporting connector instance (yes/no). | no | yes | +| destination | Accepts a space separated list of hostnames, IPs (IPv4 and IPv6) and ports to connect to. Netdata will use the first available to send the metrics. | no | yes | +| username | Username for HTTP authentication | my_username | no | +| password | Password for HTTP authentication | my_password | no | +| data source | Selects the kind of data that will be sent to the external database. (as collected/average/sum) | | no | +| hostname | The hostname to be used for sending data to the external database server. | [global].hostname | no | +| prefix | The prefix to add to all metrics. | netdata | no | +| update every | Frequency of sending sending data to the external database, in seconds. | 10 | no | +| buffer on failures | The number of iterations (`update every` seconds) to buffer data, when the external database server is not available. | 10 | no | +| timeout ms | The timeout in milliseconds to wait for the external database server to process the data. | 20000 | no | +| send hosts matching | Hosts filter. Determines which hosts will be sent to the external database. The syntax is [simple patterns](https://github.com/netdata/netdata/tree/master/libnetdata/simple_pattern#simple-patterns). | localhost * | no | +| send charts matching | One or more space separated patterns (use * as wildcard) checked against both chart id and chart name. | * | no | +| send names instead of ids | Controls the metric names Netdata should send to the external database (yes/no). | | no | +| send configured labels | Controls if host labels defined in the `[host labels]` section in `netdata.conf` should be sent to the external database (yes/no). | | no | +| send automatic labels | Controls if automatically created labels, like `_os_name` or `_architecture` should be sent to the external database (yes/no). | | no | + +##### destination + +The format of each item in this list, is: [PROTOCOL:]IP[:PORT]. +- PROTOCOL can be udp or tcp. tcp is the default and only supported by the current exporting engine. +- IP can be XX.XX.XX.XX (IPv4), or [XX:XX...XX:XX] (IPv6). For IPv6 you can to enclose the IP in [] to separate it from the port. +- PORT can be a number of a service name. If omitted, the default port for the exporting connector will be used. + +Example IPv4: + ```yaml + destination = 10.11.14.2:2003 10.11.14.3:4242 10.11.14.4:2003 + ``` +Example IPv6 and IPv4 together: +```yaml +destination = [ffff:...:0001]:2003 10.11.12.1:2003 +``` +When multiple servers are defined, Netdata will try the next one when the previous one fails. + + +##### update every + +Netdata will add some randomness to this number, to prevent stressing the external server when many Netdata servers +send data to the same database. This randomness does not affect the quality of the data, only the time they are sent. + + +##### buffer on failures + +If the server fails to receive the data after that many failures, data loss on the connector instance is expected (Netdata will also log it). + + +##### send hosts matching + +Includes one or more space separated patterns, using * as wildcard (any number of times within each pattern). +The patterns are checked against the hostname (the localhost is always checked as localhost), allowing us to +filter which hosts will be sent to the external database when this Netdata is a central Netdata aggregating multiple hosts. + +A pattern starting with `!` gives a negative match. So to match all hosts named `*db*` except hosts containing `*child*`, +use `!*child* *db*` (so, the order is important: the first pattern matching the hostname will be used - positive or negative). + + +##### send charts matching + +A pattern starting with ! gives a negative match. So to match all charts named apps.* except charts ending in *reads, +use !*reads apps.* (so, the order is important: the first pattern matching the chart id or the chart name will be used, +positive or negative). There is also a URL parameter filter that can be used while querying allmetrics. The URL parameter +has a higher priority than the configuration option. + + +##### send names instead of ids + +Netdata supports names and IDs for charts and dimensions. Usually IDs are unique identifiers as read by the system and names +are human friendly labels (also unique). Most charts and metrics have the same ID and name, but in several cases they are +different : disks with device-mapper, interrupts, QoS classes, statsd synthetic charts, etc. + + +
+ +#### Examples + +##### Example configuration + +Basic example configuration for Prometheus remote write. + +```yaml +[prometheus_remote_write:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + +``` +##### Example configuration with HTTPS and HTTP authentication + +Add `:https` modifier to the connector type if you need to use the TLS/SSL protocol. For example: `remote_write:https:my_instance`. + +```yaml +[prometheus_remote_write:https:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + username = my_username + password = my_password + +``` + diff --git a/exporting/prometheus/integrations/cortex.md b/exporting/prometheus/integrations/cortex.md new file mode 100644 index 00000000..784c62ce --- /dev/null +++ b/exporting/prometheus/integrations/cortex.md @@ -0,0 +1,158 @@ + + +# Cortex + + + + + +Use the Prometheus remote write exporting connector to archive your Netdata metrics to the external storage provider of your choice for long-term storage and further analysis. + + + + +## Limitations + +The remote write exporting connector does not support buffer on failures. + + +## Setup + +### Prerequisites + +#### + +- Netdata and the external storage provider of your choice, installed, configured and operational. +- `protobuf` and `snappy` libraries installed. +- Netdata reinstalled after the libraries. + + + +### Configuration + +#### File + +The configuration file name for this integration is `exporting.conf`. + + +You can edit the configuration file using the `edit-config` script from the +Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#the-netdata-config-directory). + +```bash +cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata +sudo ./edit-config exporting.conf +``` +#### Options + +The following options can be defined for this exporter. + +
Config options + +| Name | Description | Default | Required | +|:----|:-----------|:-------|:--------:| +| enabled | Enables or disables an exporting connector instance (yes/no). | no | yes | +| destination | Accepts a space separated list of hostnames, IPs (IPv4 and IPv6) and ports to connect to. Netdata will use the first available to send the metrics. | no | yes | +| username | Username for HTTP authentication | my_username | no | +| password | Password for HTTP authentication | my_password | no | +| data source | Selects the kind of data that will be sent to the external database. (as collected/average/sum) | | no | +| hostname | The hostname to be used for sending data to the external database server. | [global].hostname | no | +| prefix | The prefix to add to all metrics. | netdata | no | +| update every | Frequency of sending sending data to the external database, in seconds. | 10 | no | +| buffer on failures | The number of iterations (`update every` seconds) to buffer data, when the external database server is not available. | 10 | no | +| timeout ms | The timeout in milliseconds to wait for the external database server to process the data. | 20000 | no | +| send hosts matching | Hosts filter. Determines which hosts will be sent to the external database. The syntax is [simple patterns](https://github.com/netdata/netdata/tree/master/libnetdata/simple_pattern#simple-patterns). | localhost * | no | +| send charts matching | One or more space separated patterns (use * as wildcard) checked against both chart id and chart name. | * | no | +| send names instead of ids | Controls the metric names Netdata should send to the external database (yes/no). | | no | +| send configured labels | Controls if host labels defined in the `[host labels]` section in `netdata.conf` should be sent to the external database (yes/no). | | no | +| send automatic labels | Controls if automatically created labels, like `_os_name` or `_architecture` should be sent to the external database (yes/no). | | no | + +##### destination + +The format of each item in this list, is: [PROTOCOL:]IP[:PORT]. +- PROTOCOL can be udp or tcp. tcp is the default and only supported by the current exporting engine. +- IP can be XX.XX.XX.XX (IPv4), or [XX:XX...XX:XX] (IPv6). For IPv6 you can to enclose the IP in [] to separate it from the port. +- PORT can be a number of a service name. If omitted, the default port for the exporting connector will be used. + +Example IPv4: + ```yaml + destination = 10.11.14.2:2003 10.11.14.3:4242 10.11.14.4:2003 + ``` +Example IPv6 and IPv4 together: +```yaml +destination = [ffff:...:0001]:2003 10.11.12.1:2003 +``` +When multiple servers are defined, Netdata will try the next one when the previous one fails. + + +##### update every + +Netdata will add some randomness to this number, to prevent stressing the external server when many Netdata servers +send data to the same database. This randomness does not affect the quality of the data, only the time they are sent. + + +##### buffer on failures + +If the server fails to receive the data after that many failures, data loss on the connector instance is expected (Netdata will also log it). + + +##### send hosts matching + +Includes one or more space separated patterns, using * as wildcard (any number of times within each pattern). +The patterns are checked against the hostname (the localhost is always checked as localhost), allowing us to +filter which hosts will be sent to the external database when this Netdata is a central Netdata aggregating multiple hosts. + +A pattern starting with `!` gives a negative match. So to match all hosts named `*db*` except hosts containing `*child*`, +use `!*child* *db*` (so, the order is important: the first pattern matching the hostname will be used - positive or negative). + + +##### send charts matching + +A pattern starting with ! gives a negative match. So to match all charts named apps.* except charts ending in *reads, +use !*reads apps.* (so, the order is important: the first pattern matching the chart id or the chart name will be used, +positive or negative). There is also a URL parameter filter that can be used while querying allmetrics. The URL parameter +has a higher priority than the configuration option. + + +##### send names instead of ids + +Netdata supports names and IDs for charts and dimensions. Usually IDs are unique identifiers as read by the system and names +are human friendly labels (also unique). Most charts and metrics have the same ID and name, but in several cases they are +different : disks with device-mapper, interrupts, QoS classes, statsd synthetic charts, etc. + + +
+ +#### Examples + +##### Example configuration + +Basic example configuration for Prometheus remote write. + +```yaml +[prometheus_remote_write:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + +``` +##### Example configuration with HTTPS and HTTP authentication + +Add `:https` modifier to the connector type if you need to use the TLS/SSL protocol. For example: `remote_write:https:my_instance`. + +```yaml +[prometheus_remote_write:https:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + username = my_username + password = my_password + +``` + diff --git a/exporting/prometheus/integrations/cratedb.md b/exporting/prometheus/integrations/cratedb.md new file mode 100644 index 00000000..75a46391 --- /dev/null +++ b/exporting/prometheus/integrations/cratedb.md @@ -0,0 +1,158 @@ + + +# CrateDB + + + + + +Use the Prometheus remote write exporting connector to archive your Netdata metrics to the external storage provider of your choice for long-term storage and further analysis. + + + + +## Limitations + +The remote write exporting connector does not support buffer on failures. + + +## Setup + +### Prerequisites + +#### + +- Netdata and the external storage provider of your choice, installed, configured and operational. +- `protobuf` and `snappy` libraries installed. +- Netdata reinstalled after the libraries. + + + +### Configuration + +#### File + +The configuration file name for this integration is `exporting.conf`. + + +You can edit the configuration file using the `edit-config` script from the +Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#the-netdata-config-directory). + +```bash +cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata +sudo ./edit-config exporting.conf +``` +#### Options + +The following options can be defined for this exporter. + +
Config options + +| Name | Description | Default | Required | +|:----|:-----------|:-------|:--------:| +| enabled | Enables or disables an exporting connector instance (yes/no). | no | yes | +| destination | Accepts a space separated list of hostnames, IPs (IPv4 and IPv6) and ports to connect to. Netdata will use the first available to send the metrics. | no | yes | +| username | Username for HTTP authentication | my_username | no | +| password | Password for HTTP authentication | my_password | no | +| data source | Selects the kind of data that will be sent to the external database. (as collected/average/sum) | | no | +| hostname | The hostname to be used for sending data to the external database server. | [global].hostname | no | +| prefix | The prefix to add to all metrics. | netdata | no | +| update every | Frequency of sending sending data to the external database, in seconds. | 10 | no | +| buffer on failures | The number of iterations (`update every` seconds) to buffer data, when the external database server is not available. | 10 | no | +| timeout ms | The timeout in milliseconds to wait for the external database server to process the data. | 20000 | no | +| send hosts matching | Hosts filter. Determines which hosts will be sent to the external database. The syntax is [simple patterns](https://github.com/netdata/netdata/tree/master/libnetdata/simple_pattern#simple-patterns). | localhost * | no | +| send charts matching | One or more space separated patterns (use * as wildcard) checked against both chart id and chart name. | * | no | +| send names instead of ids | Controls the metric names Netdata should send to the external database (yes/no). | | no | +| send configured labels | Controls if host labels defined in the `[host labels]` section in `netdata.conf` should be sent to the external database (yes/no). | | no | +| send automatic labels | Controls if automatically created labels, like `_os_name` or `_architecture` should be sent to the external database (yes/no). | | no | + +##### destination + +The format of each item in this list, is: [PROTOCOL:]IP[:PORT]. +- PROTOCOL can be udp or tcp. tcp is the default and only supported by the current exporting engine. +- IP can be XX.XX.XX.XX (IPv4), or [XX:XX...XX:XX] (IPv6). For IPv6 you can to enclose the IP in [] to separate it from the port. +- PORT can be a number of a service name. If omitted, the default port for the exporting connector will be used. + +Example IPv4: + ```yaml + destination = 10.11.14.2:2003 10.11.14.3:4242 10.11.14.4:2003 + ``` +Example IPv6 and IPv4 together: +```yaml +destination = [ffff:...:0001]:2003 10.11.12.1:2003 +``` +When multiple servers are defined, Netdata will try the next one when the previous one fails. + + +##### update every + +Netdata will add some randomness to this number, to prevent stressing the external server when many Netdata servers +send data to the same database. This randomness does not affect the quality of the data, only the time they are sent. + + +##### buffer on failures + +If the server fails to receive the data after that many failures, data loss on the connector instance is expected (Netdata will also log it). + + +##### send hosts matching + +Includes one or more space separated patterns, using * as wildcard (any number of times within each pattern). +The patterns are checked against the hostname (the localhost is always checked as localhost), allowing us to +filter which hosts will be sent to the external database when this Netdata is a central Netdata aggregating multiple hosts. + +A pattern starting with `!` gives a negative match. So to match all hosts named `*db*` except hosts containing `*child*`, +use `!*child* *db*` (so, the order is important: the first pattern matching the hostname will be used - positive or negative). + + +##### send charts matching + +A pattern starting with ! gives a negative match. So to match all charts named apps.* except charts ending in *reads, +use !*reads apps.* (so, the order is important: the first pattern matching the chart id or the chart name will be used, +positive or negative). There is also a URL parameter filter that can be used while querying allmetrics. The URL parameter +has a higher priority than the configuration option. + + +##### send names instead of ids + +Netdata supports names and IDs for charts and dimensions. Usually IDs are unique identifiers as read by the system and names +are human friendly labels (also unique). Most charts and metrics have the same ID and name, but in several cases they are +different : disks with device-mapper, interrupts, QoS classes, statsd synthetic charts, etc. + + +
+ +#### Examples + +##### Example configuration + +Basic example configuration for Prometheus remote write. + +```yaml +[prometheus_remote_write:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + +``` +##### Example configuration with HTTPS and HTTP authentication + +Add `:https` modifier to the connector type if you need to use the TLS/SSL protocol. For example: `remote_write:https:my_instance`. + +```yaml +[prometheus_remote_write:https:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + username = my_username + password = my_password + +``` + diff --git a/exporting/prometheus/integrations/elasticsearch.md b/exporting/prometheus/integrations/elasticsearch.md new file mode 100644 index 00000000..94e8d916 --- /dev/null +++ b/exporting/prometheus/integrations/elasticsearch.md @@ -0,0 +1,158 @@ + + +# ElasticSearch + + + + + +Use the Prometheus remote write exporting connector to archive your Netdata metrics to the external storage provider of your choice for long-term storage and further analysis. + + + + +## Limitations + +The remote write exporting connector does not support buffer on failures. + + +## Setup + +### Prerequisites + +#### + +- Netdata and the external storage provider of your choice, installed, configured and operational. +- `protobuf` and `snappy` libraries installed. +- Netdata reinstalled after the libraries. + + + +### Configuration + +#### File + +The configuration file name for this integration is `exporting.conf`. + + +You can edit the configuration file using the `edit-config` script from the +Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#the-netdata-config-directory). + +```bash +cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata +sudo ./edit-config exporting.conf +``` +#### Options + +The following options can be defined for this exporter. + +
Config options + +| Name | Description | Default | Required | +|:----|:-----------|:-------|:--------:| +| enabled | Enables or disables an exporting connector instance (yes/no). | no | yes | +| destination | Accepts a space separated list of hostnames, IPs (IPv4 and IPv6) and ports to connect to. Netdata will use the first available to send the metrics. | no | yes | +| username | Username for HTTP authentication | my_username | no | +| password | Password for HTTP authentication | my_password | no | +| data source | Selects the kind of data that will be sent to the external database. (as collected/average/sum) | | no | +| hostname | The hostname to be used for sending data to the external database server. | [global].hostname | no | +| prefix | The prefix to add to all metrics. | netdata | no | +| update every | Frequency of sending sending data to the external database, in seconds. | 10 | no | +| buffer on failures | The number of iterations (`update every` seconds) to buffer data, when the external database server is not available. | 10 | no | +| timeout ms | The timeout in milliseconds to wait for the external database server to process the data. | 20000 | no | +| send hosts matching | Hosts filter. Determines which hosts will be sent to the external database. The syntax is [simple patterns](https://github.com/netdata/netdata/tree/master/libnetdata/simple_pattern#simple-patterns). | localhost * | no | +| send charts matching | One or more space separated patterns (use * as wildcard) checked against both chart id and chart name. | * | no | +| send names instead of ids | Controls the metric names Netdata should send to the external database (yes/no). | | no | +| send configured labels | Controls if host labels defined in the `[host labels]` section in `netdata.conf` should be sent to the external database (yes/no). | | no | +| send automatic labels | Controls if automatically created labels, like `_os_name` or `_architecture` should be sent to the external database (yes/no). | | no | + +##### destination + +The format of each item in this list, is: [PROTOCOL:]IP[:PORT]. +- PROTOCOL can be udp or tcp. tcp is the default and only supported by the current exporting engine. +- IP can be XX.XX.XX.XX (IPv4), or [XX:XX...XX:XX] (IPv6). For IPv6 you can to enclose the IP in [] to separate it from the port. +- PORT can be a number of a service name. If omitted, the default port for the exporting connector will be used. + +Example IPv4: + ```yaml + destination = 10.11.14.2:2003 10.11.14.3:4242 10.11.14.4:2003 + ``` +Example IPv6 and IPv4 together: +```yaml +destination = [ffff:...:0001]:2003 10.11.12.1:2003 +``` +When multiple servers are defined, Netdata will try the next one when the previous one fails. + + +##### update every + +Netdata will add some randomness to this number, to prevent stressing the external server when many Netdata servers +send data to the same database. This randomness does not affect the quality of the data, only the time they are sent. + + +##### buffer on failures + +If the server fails to receive the data after that many failures, data loss on the connector instance is expected (Netdata will also log it). + + +##### send hosts matching + +Includes one or more space separated patterns, using * as wildcard (any number of times within each pattern). +The patterns are checked against the hostname (the localhost is always checked as localhost), allowing us to +filter which hosts will be sent to the external database when this Netdata is a central Netdata aggregating multiple hosts. + +A pattern starting with `!` gives a negative match. So to match all hosts named `*db*` except hosts containing `*child*`, +use `!*child* *db*` (so, the order is important: the first pattern matching the hostname will be used - positive or negative). + + +##### send charts matching + +A pattern starting with ! gives a negative match. So to match all charts named apps.* except charts ending in *reads, +use !*reads apps.* (so, the order is important: the first pattern matching the chart id or the chart name will be used, +positive or negative). There is also a URL parameter filter that can be used while querying allmetrics. The URL parameter +has a higher priority than the configuration option. + + +##### send names instead of ids + +Netdata supports names and IDs for charts and dimensions. Usually IDs are unique identifiers as read by the system and names +are human friendly labels (also unique). Most charts and metrics have the same ID and name, but in several cases they are +different : disks with device-mapper, interrupts, QoS classes, statsd synthetic charts, etc. + + +
+ +#### Examples + +##### Example configuration + +Basic example configuration for Prometheus remote write. + +```yaml +[prometheus_remote_write:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + +``` +##### Example configuration with HTTPS and HTTP authentication + +Add `:https` modifier to the connector type if you need to use the TLS/SSL protocol. For example: `remote_write:https:my_instance`. + +```yaml +[prometheus_remote_write:https:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + username = my_username + password = my_password + +``` + diff --git a/exporting/prometheus/integrations/gnocchi.md b/exporting/prometheus/integrations/gnocchi.md new file mode 100644 index 00000000..a61986c1 --- /dev/null +++ b/exporting/prometheus/integrations/gnocchi.md @@ -0,0 +1,158 @@ + + +# Gnocchi + + + + + +Use the Prometheus remote write exporting connector to archive your Netdata metrics to the external storage provider of your choice for long-term storage and further analysis. + + + + +## Limitations + +The remote write exporting connector does not support buffer on failures. + + +## Setup + +### Prerequisites + +#### + +- Netdata and the external storage provider of your choice, installed, configured and operational. +- `protobuf` and `snappy` libraries installed. +- Netdata reinstalled after the libraries. + + + +### Configuration + +#### File + +The configuration file name for this integration is `exporting.conf`. + + +You can edit the configuration file using the `edit-config` script from the +Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#the-netdata-config-directory). + +```bash +cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata +sudo ./edit-config exporting.conf +``` +#### Options + +The following options can be defined for this exporter. + +
Config options + +| Name | Description | Default | Required | +|:----|:-----------|:-------|:--------:| +| enabled | Enables or disables an exporting connector instance (yes/no). | no | yes | +| destination | Accepts a space separated list of hostnames, IPs (IPv4 and IPv6) and ports to connect to. Netdata will use the first available to send the metrics. | no | yes | +| username | Username for HTTP authentication | my_username | no | +| password | Password for HTTP authentication | my_password | no | +| data source | Selects the kind of data that will be sent to the external database. (as collected/average/sum) | | no | +| hostname | The hostname to be used for sending data to the external database server. | [global].hostname | no | +| prefix | The prefix to add to all metrics. | netdata | no | +| update every | Frequency of sending sending data to the external database, in seconds. | 10 | no | +| buffer on failures | The number of iterations (`update every` seconds) to buffer data, when the external database server is not available. | 10 | no | +| timeout ms | The timeout in milliseconds to wait for the external database server to process the data. | 20000 | no | +| send hosts matching | Hosts filter. Determines which hosts will be sent to the external database. The syntax is [simple patterns](https://github.com/netdata/netdata/tree/master/libnetdata/simple_pattern#simple-patterns). | localhost * | no | +| send charts matching | One or more space separated patterns (use * as wildcard) checked against both chart id and chart name. | * | no | +| send names instead of ids | Controls the metric names Netdata should send to the external database (yes/no). | | no | +| send configured labels | Controls if host labels defined in the `[host labels]` section in `netdata.conf` should be sent to the external database (yes/no). | | no | +| send automatic labels | Controls if automatically created labels, like `_os_name` or `_architecture` should be sent to the external database (yes/no). | | no | + +##### destination + +The format of each item in this list, is: [PROTOCOL:]IP[:PORT]. +- PROTOCOL can be udp or tcp. tcp is the default and only supported by the current exporting engine. +- IP can be XX.XX.XX.XX (IPv4), or [XX:XX...XX:XX] (IPv6). For IPv6 you can to enclose the IP in [] to separate it from the port. +- PORT can be a number of a service name. If omitted, the default port for the exporting connector will be used. + +Example IPv4: + ```yaml + destination = 10.11.14.2:2003 10.11.14.3:4242 10.11.14.4:2003 + ``` +Example IPv6 and IPv4 together: +```yaml +destination = [ffff:...:0001]:2003 10.11.12.1:2003 +``` +When multiple servers are defined, Netdata will try the next one when the previous one fails. + + +##### update every + +Netdata will add some randomness to this number, to prevent stressing the external server when many Netdata servers +send data to the same database. This randomness does not affect the quality of the data, only the time they are sent. + + +##### buffer on failures + +If the server fails to receive the data after that many failures, data loss on the connector instance is expected (Netdata will also log it). + + +##### send hosts matching + +Includes one or more space separated patterns, using * as wildcard (any number of times within each pattern). +The patterns are checked against the hostname (the localhost is always checked as localhost), allowing us to +filter which hosts will be sent to the external database when this Netdata is a central Netdata aggregating multiple hosts. + +A pattern starting with `!` gives a negative match. So to match all hosts named `*db*` except hosts containing `*child*`, +use `!*child* *db*` (so, the order is important: the first pattern matching the hostname will be used - positive or negative). + + +##### send charts matching + +A pattern starting with ! gives a negative match. So to match all charts named apps.* except charts ending in *reads, +use !*reads apps.* (so, the order is important: the first pattern matching the chart id or the chart name will be used, +positive or negative). There is also a URL parameter filter that can be used while querying allmetrics. The URL parameter +has a higher priority than the configuration option. + + +##### send names instead of ids + +Netdata supports names and IDs for charts and dimensions. Usually IDs are unique identifiers as read by the system and names +are human friendly labels (also unique). Most charts and metrics have the same ID and name, but in several cases they are +different : disks with device-mapper, interrupts, QoS classes, statsd synthetic charts, etc. + + +
+ +#### Examples + +##### Example configuration + +Basic example configuration for Prometheus remote write. + +```yaml +[prometheus_remote_write:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + +``` +##### Example configuration with HTTPS and HTTP authentication + +Add `:https` modifier to the connector type if you need to use the TLS/SSL protocol. For example: `remote_write:https:my_instance`. + +```yaml +[prometheus_remote_write:https:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + username = my_username + password = my_password + +``` + diff --git a/exporting/prometheus/integrations/google_bigquery.md b/exporting/prometheus/integrations/google_bigquery.md new file mode 100644 index 00000000..aec0a9a5 --- /dev/null +++ b/exporting/prometheus/integrations/google_bigquery.md @@ -0,0 +1,158 @@ + + +# Google BigQuery + + + + + +Use the Prometheus remote write exporting connector to archive your Netdata metrics to the external storage provider of your choice for long-term storage and further analysis. + + + + +## Limitations + +The remote write exporting connector does not support buffer on failures. + + +## Setup + +### Prerequisites + +#### + +- Netdata and the external storage provider of your choice, installed, configured and operational. +- `protobuf` and `snappy` libraries installed. +- Netdata reinstalled after the libraries. + + + +### Configuration + +#### File + +The configuration file name for this integration is `exporting.conf`. + + +You can edit the configuration file using the `edit-config` script from the +Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#the-netdata-config-directory). + +```bash +cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata +sudo ./edit-config exporting.conf +``` +#### Options + +The following options can be defined for this exporter. + +
Config options + +| Name | Description | Default | Required | +|:----|:-----------|:-------|:--------:| +| enabled | Enables or disables an exporting connector instance (yes/no). | no | yes | +| destination | Accepts a space separated list of hostnames, IPs (IPv4 and IPv6) and ports to connect to. Netdata will use the first available to send the metrics. | no | yes | +| username | Username for HTTP authentication | my_username | no | +| password | Password for HTTP authentication | my_password | no | +| data source | Selects the kind of data that will be sent to the external database. (as collected/average/sum) | | no | +| hostname | The hostname to be used for sending data to the external database server. | [global].hostname | no | +| prefix | The prefix to add to all metrics. | netdata | no | +| update every | Frequency of sending sending data to the external database, in seconds. | 10 | no | +| buffer on failures | The number of iterations (`update every` seconds) to buffer data, when the external database server is not available. | 10 | no | +| timeout ms | The timeout in milliseconds to wait for the external database server to process the data. | 20000 | no | +| send hosts matching | Hosts filter. Determines which hosts will be sent to the external database. The syntax is [simple patterns](https://github.com/netdata/netdata/tree/master/libnetdata/simple_pattern#simple-patterns). | localhost * | no | +| send charts matching | One or more space separated patterns (use * as wildcard) checked against both chart id and chart name. | * | no | +| send names instead of ids | Controls the metric names Netdata should send to the external database (yes/no). | | no | +| send configured labels | Controls if host labels defined in the `[host labels]` section in `netdata.conf` should be sent to the external database (yes/no). | | no | +| send automatic labels | Controls if automatically created labels, like `_os_name` or `_architecture` should be sent to the external database (yes/no). | | no | + +##### destination + +The format of each item in this list, is: [PROTOCOL:]IP[:PORT]. +- PROTOCOL can be udp or tcp. tcp is the default and only supported by the current exporting engine. +- IP can be XX.XX.XX.XX (IPv4), or [XX:XX...XX:XX] (IPv6). For IPv6 you can to enclose the IP in [] to separate it from the port. +- PORT can be a number of a service name. If omitted, the default port for the exporting connector will be used. + +Example IPv4: + ```yaml + destination = 10.11.14.2:2003 10.11.14.3:4242 10.11.14.4:2003 + ``` +Example IPv6 and IPv4 together: +```yaml +destination = [ffff:...:0001]:2003 10.11.12.1:2003 +``` +When multiple servers are defined, Netdata will try the next one when the previous one fails. + + +##### update every + +Netdata will add some randomness to this number, to prevent stressing the external server when many Netdata servers +send data to the same database. This randomness does not affect the quality of the data, only the time they are sent. + + +##### buffer on failures + +If the server fails to receive the data after that many failures, data loss on the connector instance is expected (Netdata will also log it). + + +##### send hosts matching + +Includes one or more space separated patterns, using * as wildcard (any number of times within each pattern). +The patterns are checked against the hostname (the localhost is always checked as localhost), allowing us to +filter which hosts will be sent to the external database when this Netdata is a central Netdata aggregating multiple hosts. + +A pattern starting with `!` gives a negative match. So to match all hosts named `*db*` except hosts containing `*child*`, +use `!*child* *db*` (so, the order is important: the first pattern matching the hostname will be used - positive or negative). + + +##### send charts matching + +A pattern starting with ! gives a negative match. So to match all charts named apps.* except charts ending in *reads, +use !*reads apps.* (so, the order is important: the first pattern matching the chart id or the chart name will be used, +positive or negative). There is also a URL parameter filter that can be used while querying allmetrics. The URL parameter +has a higher priority than the configuration option. + + +##### send names instead of ids + +Netdata supports names and IDs for charts and dimensions. Usually IDs are unique identifiers as read by the system and names +are human friendly labels (also unique). Most charts and metrics have the same ID and name, but in several cases they are +different : disks with device-mapper, interrupts, QoS classes, statsd synthetic charts, etc. + + +
+ +#### Examples + +##### Example configuration + +Basic example configuration for Prometheus remote write. + +```yaml +[prometheus_remote_write:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + +``` +##### Example configuration with HTTPS and HTTP authentication + +Add `:https` modifier to the connector type if you need to use the TLS/SSL protocol. For example: `remote_write:https:my_instance`. + +```yaml +[prometheus_remote_write:https:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + username = my_username + password = my_password + +``` + diff --git a/exporting/prometheus/integrations/irondb.md b/exporting/prometheus/integrations/irondb.md new file mode 100644 index 00000000..450f8833 --- /dev/null +++ b/exporting/prometheus/integrations/irondb.md @@ -0,0 +1,158 @@ + + +# IRONdb + + + + + +Use the Prometheus remote write exporting connector to archive your Netdata metrics to the external storage provider of your choice for long-term storage and further analysis. + + + + +## Limitations + +The remote write exporting connector does not support buffer on failures. + + +## Setup + +### Prerequisites + +#### + +- Netdata and the external storage provider of your choice, installed, configured and operational. +- `protobuf` and `snappy` libraries installed. +- Netdata reinstalled after the libraries. + + + +### Configuration + +#### File + +The configuration file name for this integration is `exporting.conf`. + + +You can edit the configuration file using the `edit-config` script from the +Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#the-netdata-config-directory). + +```bash +cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata +sudo ./edit-config exporting.conf +``` +#### Options + +The following options can be defined for this exporter. + +
Config options + +| Name | Description | Default | Required | +|:----|:-----------|:-------|:--------:| +| enabled | Enables or disables an exporting connector instance (yes/no). | no | yes | +| destination | Accepts a space separated list of hostnames, IPs (IPv4 and IPv6) and ports to connect to. Netdata will use the first available to send the metrics. | no | yes | +| username | Username for HTTP authentication | my_username | no | +| password | Password for HTTP authentication | my_password | no | +| data source | Selects the kind of data that will be sent to the external database. (as collected/average/sum) | | no | +| hostname | The hostname to be used for sending data to the external database server. | [global].hostname | no | +| prefix | The prefix to add to all metrics. | netdata | no | +| update every | Frequency of sending sending data to the external database, in seconds. | 10 | no | +| buffer on failures | The number of iterations (`update every` seconds) to buffer data, when the external database server is not available. | 10 | no | +| timeout ms | The timeout in milliseconds to wait for the external database server to process the data. | 20000 | no | +| send hosts matching | Hosts filter. Determines which hosts will be sent to the external database. The syntax is [simple patterns](https://github.com/netdata/netdata/tree/master/libnetdata/simple_pattern#simple-patterns). | localhost * | no | +| send charts matching | One or more space separated patterns (use * as wildcard) checked against both chart id and chart name. | * | no | +| send names instead of ids | Controls the metric names Netdata should send to the external database (yes/no). | | no | +| send configured labels | Controls if host labels defined in the `[host labels]` section in `netdata.conf` should be sent to the external database (yes/no). | | no | +| send automatic labels | Controls if automatically created labels, like `_os_name` or `_architecture` should be sent to the external database (yes/no). | | no | + +##### destination + +The format of each item in this list, is: [PROTOCOL:]IP[:PORT]. +- PROTOCOL can be udp or tcp. tcp is the default and only supported by the current exporting engine. +- IP can be XX.XX.XX.XX (IPv4), or [XX:XX...XX:XX] (IPv6). For IPv6 you can to enclose the IP in [] to separate it from the port. +- PORT can be a number of a service name. If omitted, the default port for the exporting connector will be used. + +Example IPv4: + ```yaml + destination = 10.11.14.2:2003 10.11.14.3:4242 10.11.14.4:2003 + ``` +Example IPv6 and IPv4 together: +```yaml +destination = [ffff:...:0001]:2003 10.11.12.1:2003 +``` +When multiple servers are defined, Netdata will try the next one when the previous one fails. + + +##### update every + +Netdata will add some randomness to this number, to prevent stressing the external server when many Netdata servers +send data to the same database. This randomness does not affect the quality of the data, only the time they are sent. + + +##### buffer on failures + +If the server fails to receive the data after that many failures, data loss on the connector instance is expected (Netdata will also log it). + + +##### send hosts matching + +Includes one or more space separated patterns, using * as wildcard (any number of times within each pattern). +The patterns are checked against the hostname (the localhost is always checked as localhost), allowing us to +filter which hosts will be sent to the external database when this Netdata is a central Netdata aggregating multiple hosts. + +A pattern starting with `!` gives a negative match. So to match all hosts named `*db*` except hosts containing `*child*`, +use `!*child* *db*` (so, the order is important: the first pattern matching the hostname will be used - positive or negative). + + +##### send charts matching + +A pattern starting with ! gives a negative match. So to match all charts named apps.* except charts ending in *reads, +use !*reads apps.* (so, the order is important: the first pattern matching the chart id or the chart name will be used, +positive or negative). There is also a URL parameter filter that can be used while querying allmetrics. The URL parameter +has a higher priority than the configuration option. + + +##### send names instead of ids + +Netdata supports names and IDs for charts and dimensions. Usually IDs are unique identifiers as read by the system and names +are human friendly labels (also unique). Most charts and metrics have the same ID and name, but in several cases they are +different : disks with device-mapper, interrupts, QoS classes, statsd synthetic charts, etc. + + +
+ +#### Examples + +##### Example configuration + +Basic example configuration for Prometheus remote write. + +```yaml +[prometheus_remote_write:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + +``` +##### Example configuration with HTTPS and HTTP authentication + +Add `:https` modifier to the connector type if you need to use the TLS/SSL protocol. For example: `remote_write:https:my_instance`. + +```yaml +[prometheus_remote_write:https:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + username = my_username + password = my_password + +``` + diff --git a/exporting/prometheus/integrations/kafka.md b/exporting/prometheus/integrations/kafka.md new file mode 100644 index 00000000..e052620c --- /dev/null +++ b/exporting/prometheus/integrations/kafka.md @@ -0,0 +1,158 @@ + + +# Kafka + + + + + +Use the Prometheus remote write exporting connector to archive your Netdata metrics to the external storage provider of your choice for long-term storage and further analysis. + + + + +## Limitations + +The remote write exporting connector does not support buffer on failures. + + +## Setup + +### Prerequisites + +#### + +- Netdata and the external storage provider of your choice, installed, configured and operational. +- `protobuf` and `snappy` libraries installed. +- Netdata reinstalled after the libraries. + + + +### Configuration + +#### File + +The configuration file name for this integration is `exporting.conf`. + + +You can edit the configuration file using the `edit-config` script from the +Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#the-netdata-config-directory). + +```bash +cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata +sudo ./edit-config exporting.conf +``` +#### Options + +The following options can be defined for this exporter. + +
Config options + +| Name | Description | Default | Required | +|:----|:-----------|:-------|:--------:| +| enabled | Enables or disables an exporting connector instance (yes/no). | no | yes | +| destination | Accepts a space separated list of hostnames, IPs (IPv4 and IPv6) and ports to connect to. Netdata will use the first available to send the metrics. | no | yes | +| username | Username for HTTP authentication | my_username | no | +| password | Password for HTTP authentication | my_password | no | +| data source | Selects the kind of data that will be sent to the external database. (as collected/average/sum) | | no | +| hostname | The hostname to be used for sending data to the external database server. | [global].hostname | no | +| prefix | The prefix to add to all metrics. | netdata | no | +| update every | Frequency of sending sending data to the external database, in seconds. | 10 | no | +| buffer on failures | The number of iterations (`update every` seconds) to buffer data, when the external database server is not available. | 10 | no | +| timeout ms | The timeout in milliseconds to wait for the external database server to process the data. | 20000 | no | +| send hosts matching | Hosts filter. Determines which hosts will be sent to the external database. The syntax is [simple patterns](https://github.com/netdata/netdata/tree/master/libnetdata/simple_pattern#simple-patterns). | localhost * | no | +| send charts matching | One or more space separated patterns (use * as wildcard) checked against both chart id and chart name. | * | no | +| send names instead of ids | Controls the metric names Netdata should send to the external database (yes/no). | | no | +| send configured labels | Controls if host labels defined in the `[host labels]` section in `netdata.conf` should be sent to the external database (yes/no). | | no | +| send automatic labels | Controls if automatically created labels, like `_os_name` or `_architecture` should be sent to the external database (yes/no). | | no | + +##### destination + +The format of each item in this list, is: [PROTOCOL:]IP[:PORT]. +- PROTOCOL can be udp or tcp. tcp is the default and only supported by the current exporting engine. +- IP can be XX.XX.XX.XX (IPv4), or [XX:XX...XX:XX] (IPv6). For IPv6 you can to enclose the IP in [] to separate it from the port. +- PORT can be a number of a service name. If omitted, the default port for the exporting connector will be used. + +Example IPv4: + ```yaml + destination = 10.11.14.2:2003 10.11.14.3:4242 10.11.14.4:2003 + ``` +Example IPv6 and IPv4 together: +```yaml +destination = [ffff:...:0001]:2003 10.11.12.1:2003 +``` +When multiple servers are defined, Netdata will try the next one when the previous one fails. + + +##### update every + +Netdata will add some randomness to this number, to prevent stressing the external server when many Netdata servers +send data to the same database. This randomness does not affect the quality of the data, only the time they are sent. + + +##### buffer on failures + +If the server fails to receive the data after that many failures, data loss on the connector instance is expected (Netdata will also log it). + + +##### send hosts matching + +Includes one or more space separated patterns, using * as wildcard (any number of times within each pattern). +The patterns are checked against the hostname (the localhost is always checked as localhost), allowing us to +filter which hosts will be sent to the external database when this Netdata is a central Netdata aggregating multiple hosts. + +A pattern starting with `!` gives a negative match. So to match all hosts named `*db*` except hosts containing `*child*`, +use `!*child* *db*` (so, the order is important: the first pattern matching the hostname will be used - positive or negative). + + +##### send charts matching + +A pattern starting with ! gives a negative match. So to match all charts named apps.* except charts ending in *reads, +use !*reads apps.* (so, the order is important: the first pattern matching the chart id or the chart name will be used, +positive or negative). There is also a URL parameter filter that can be used while querying allmetrics. The URL parameter +has a higher priority than the configuration option. + + +##### send names instead of ids + +Netdata supports names and IDs for charts and dimensions. Usually IDs are unique identifiers as read by the system and names +are human friendly labels (also unique). Most charts and metrics have the same ID and name, but in several cases they are +different : disks with device-mapper, interrupts, QoS classes, statsd synthetic charts, etc. + + +
+ +#### Examples + +##### Example configuration + +Basic example configuration for Prometheus remote write. + +```yaml +[prometheus_remote_write:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + +``` +##### Example configuration with HTTPS and HTTP authentication + +Add `:https` modifier to the connector type if you need to use the TLS/SSL protocol. For example: `remote_write:https:my_instance`. + +```yaml +[prometheus_remote_write:https:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + username = my_username + password = my_password + +``` + diff --git a/exporting/prometheus/integrations/m3db.md b/exporting/prometheus/integrations/m3db.md new file mode 100644 index 00000000..689e8e85 --- /dev/null +++ b/exporting/prometheus/integrations/m3db.md @@ -0,0 +1,158 @@ + + +# M3DB + + + + + +Use the Prometheus remote write exporting connector to archive your Netdata metrics to the external storage provider of your choice for long-term storage and further analysis. + + + + +## Limitations + +The remote write exporting connector does not support buffer on failures. + + +## Setup + +### Prerequisites + +#### + +- Netdata and the external storage provider of your choice, installed, configured and operational. +- `protobuf` and `snappy` libraries installed. +- Netdata reinstalled after the libraries. + + + +### Configuration + +#### File + +The configuration file name for this integration is `exporting.conf`. + + +You can edit the configuration file using the `edit-config` script from the +Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#the-netdata-config-directory). + +```bash +cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata +sudo ./edit-config exporting.conf +``` +#### Options + +The following options can be defined for this exporter. + +
Config options + +| Name | Description | Default | Required | +|:----|:-----------|:-------|:--------:| +| enabled | Enables or disables an exporting connector instance (yes/no). | no | yes | +| destination | Accepts a space separated list of hostnames, IPs (IPv4 and IPv6) and ports to connect to. Netdata will use the first available to send the metrics. | no | yes | +| username | Username for HTTP authentication | my_username | no | +| password | Password for HTTP authentication | my_password | no | +| data source | Selects the kind of data that will be sent to the external database. (as collected/average/sum) | | no | +| hostname | The hostname to be used for sending data to the external database server. | [global].hostname | no | +| prefix | The prefix to add to all metrics. | netdata | no | +| update every | Frequency of sending sending data to the external database, in seconds. | 10 | no | +| buffer on failures | The number of iterations (`update every` seconds) to buffer data, when the external database server is not available. | 10 | no | +| timeout ms | The timeout in milliseconds to wait for the external database server to process the data. | 20000 | no | +| send hosts matching | Hosts filter. Determines which hosts will be sent to the external database. The syntax is [simple patterns](https://github.com/netdata/netdata/tree/master/libnetdata/simple_pattern#simple-patterns). | localhost * | no | +| send charts matching | One or more space separated patterns (use * as wildcard) checked against both chart id and chart name. | * | no | +| send names instead of ids | Controls the metric names Netdata should send to the external database (yes/no). | | no | +| send configured labels | Controls if host labels defined in the `[host labels]` section in `netdata.conf` should be sent to the external database (yes/no). | | no | +| send automatic labels | Controls if automatically created labels, like `_os_name` or `_architecture` should be sent to the external database (yes/no). | | no | + +##### destination + +The format of each item in this list, is: [PROTOCOL:]IP[:PORT]. +- PROTOCOL can be udp or tcp. tcp is the default and only supported by the current exporting engine. +- IP can be XX.XX.XX.XX (IPv4), or [XX:XX...XX:XX] (IPv6). For IPv6 you can to enclose the IP in [] to separate it from the port. +- PORT can be a number of a service name. If omitted, the default port for the exporting connector will be used. + +Example IPv4: + ```yaml + destination = 10.11.14.2:2003 10.11.14.3:4242 10.11.14.4:2003 + ``` +Example IPv6 and IPv4 together: +```yaml +destination = [ffff:...:0001]:2003 10.11.12.1:2003 +``` +When multiple servers are defined, Netdata will try the next one when the previous one fails. + + +##### update every + +Netdata will add some randomness to this number, to prevent stressing the external server when many Netdata servers +send data to the same database. This randomness does not affect the quality of the data, only the time they are sent. + + +##### buffer on failures + +If the server fails to receive the data after that many failures, data loss on the connector instance is expected (Netdata will also log it). + + +##### send hosts matching + +Includes one or more space separated patterns, using * as wildcard (any number of times within each pattern). +The patterns are checked against the hostname (the localhost is always checked as localhost), allowing us to +filter which hosts will be sent to the external database when this Netdata is a central Netdata aggregating multiple hosts. + +A pattern starting with `!` gives a negative match. So to match all hosts named `*db*` except hosts containing `*child*`, +use `!*child* *db*` (so, the order is important: the first pattern matching the hostname will be used - positive or negative). + + +##### send charts matching + +A pattern starting with ! gives a negative match. So to match all charts named apps.* except charts ending in *reads, +use !*reads apps.* (so, the order is important: the first pattern matching the chart id or the chart name will be used, +positive or negative). There is also a URL parameter filter that can be used while querying allmetrics. The URL parameter +has a higher priority than the configuration option. + + +##### send names instead of ids + +Netdata supports names and IDs for charts and dimensions. Usually IDs are unique identifiers as read by the system and names +are human friendly labels (also unique). Most charts and metrics have the same ID and name, but in several cases they are +different : disks with device-mapper, interrupts, QoS classes, statsd synthetic charts, etc. + + +
+ +#### Examples + +##### Example configuration + +Basic example configuration for Prometheus remote write. + +```yaml +[prometheus_remote_write:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + +``` +##### Example configuration with HTTPS and HTTP authentication + +Add `:https` modifier to the connector type if you need to use the TLS/SSL protocol. For example: `remote_write:https:my_instance`. + +```yaml +[prometheus_remote_write:https:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + username = my_username + password = my_password + +``` + diff --git a/exporting/prometheus/integrations/metricfire.md b/exporting/prometheus/integrations/metricfire.md new file mode 100644 index 00000000..2d69e33f --- /dev/null +++ b/exporting/prometheus/integrations/metricfire.md @@ -0,0 +1,158 @@ + + +# MetricFire + + + + + +Use the Prometheus remote write exporting connector to archive your Netdata metrics to the external storage provider of your choice for long-term storage and further analysis. + + + + +## Limitations + +The remote write exporting connector does not support buffer on failures. + + +## Setup + +### Prerequisites + +#### + +- Netdata and the external storage provider of your choice, installed, configured and operational. +- `protobuf` and `snappy` libraries installed. +- Netdata reinstalled after the libraries. + + + +### Configuration + +#### File + +The configuration file name for this integration is `exporting.conf`. + + +You can edit the configuration file using the `edit-config` script from the +Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#the-netdata-config-directory). + +```bash +cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata +sudo ./edit-config exporting.conf +``` +#### Options + +The following options can be defined for this exporter. + +
Config options + +| Name | Description | Default | Required | +|:----|:-----------|:-------|:--------:| +| enabled | Enables or disables an exporting connector instance (yes/no). | no | yes | +| destination | Accepts a space separated list of hostnames, IPs (IPv4 and IPv6) and ports to connect to. Netdata will use the first available to send the metrics. | no | yes | +| username | Username for HTTP authentication | my_username | no | +| password | Password for HTTP authentication | my_password | no | +| data source | Selects the kind of data that will be sent to the external database. (as collected/average/sum) | | no | +| hostname | The hostname to be used for sending data to the external database server. | [global].hostname | no | +| prefix | The prefix to add to all metrics. | netdata | no | +| update every | Frequency of sending sending data to the external database, in seconds. | 10 | no | +| buffer on failures | The number of iterations (`update every` seconds) to buffer data, when the external database server is not available. | 10 | no | +| timeout ms | The timeout in milliseconds to wait for the external database server to process the data. | 20000 | no | +| send hosts matching | Hosts filter. Determines which hosts will be sent to the external database. The syntax is [simple patterns](https://github.com/netdata/netdata/tree/master/libnetdata/simple_pattern#simple-patterns). | localhost * | no | +| send charts matching | One or more space separated patterns (use * as wildcard) checked against both chart id and chart name. | * | no | +| send names instead of ids | Controls the metric names Netdata should send to the external database (yes/no). | | no | +| send configured labels | Controls if host labels defined in the `[host labels]` section in `netdata.conf` should be sent to the external database (yes/no). | | no | +| send automatic labels | Controls if automatically created labels, like `_os_name` or `_architecture` should be sent to the external database (yes/no). | | no | + +##### destination + +The format of each item in this list, is: [PROTOCOL:]IP[:PORT]. +- PROTOCOL can be udp or tcp. tcp is the default and only supported by the current exporting engine. +- IP can be XX.XX.XX.XX (IPv4), or [XX:XX...XX:XX] (IPv6). For IPv6 you can to enclose the IP in [] to separate it from the port. +- PORT can be a number of a service name. If omitted, the default port for the exporting connector will be used. + +Example IPv4: + ```yaml + destination = 10.11.14.2:2003 10.11.14.3:4242 10.11.14.4:2003 + ``` +Example IPv6 and IPv4 together: +```yaml +destination = [ffff:...:0001]:2003 10.11.12.1:2003 +``` +When multiple servers are defined, Netdata will try the next one when the previous one fails. + + +##### update every + +Netdata will add some randomness to this number, to prevent stressing the external server when many Netdata servers +send data to the same database. This randomness does not affect the quality of the data, only the time they are sent. + + +##### buffer on failures + +If the server fails to receive the data after that many failures, data loss on the connector instance is expected (Netdata will also log it). + + +##### send hosts matching + +Includes one or more space separated patterns, using * as wildcard (any number of times within each pattern). +The patterns are checked against the hostname (the localhost is always checked as localhost), allowing us to +filter which hosts will be sent to the external database when this Netdata is a central Netdata aggregating multiple hosts. + +A pattern starting with `!` gives a negative match. So to match all hosts named `*db*` except hosts containing `*child*`, +use `!*child* *db*` (so, the order is important: the first pattern matching the hostname will be used - positive or negative). + + +##### send charts matching + +A pattern starting with ! gives a negative match. So to match all charts named apps.* except charts ending in *reads, +use !*reads apps.* (so, the order is important: the first pattern matching the chart id or the chart name will be used, +positive or negative). There is also a URL parameter filter that can be used while querying allmetrics. The URL parameter +has a higher priority than the configuration option. + + +##### send names instead of ids + +Netdata supports names and IDs for charts and dimensions. Usually IDs are unique identifiers as read by the system and names +are human friendly labels (also unique). Most charts and metrics have the same ID and name, but in several cases they are +different : disks with device-mapper, interrupts, QoS classes, statsd synthetic charts, etc. + + +
+ +#### Examples + +##### Example configuration + +Basic example configuration for Prometheus remote write. + +```yaml +[prometheus_remote_write:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + +``` +##### Example configuration with HTTPS and HTTP authentication + +Add `:https` modifier to the connector type if you need to use the TLS/SSL protocol. For example: `remote_write:https:my_instance`. + +```yaml +[prometheus_remote_write:https:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + username = my_username + password = my_password + +``` + diff --git a/exporting/prometheus/integrations/new_relic.md b/exporting/prometheus/integrations/new_relic.md new file mode 100644 index 00000000..f488b620 --- /dev/null +++ b/exporting/prometheus/integrations/new_relic.md @@ -0,0 +1,158 @@ + + +# New Relic + + + + + +Use the Prometheus remote write exporting connector to archive your Netdata metrics to the external storage provider of your choice for long-term storage and further analysis. + + + + +## Limitations + +The remote write exporting connector does not support buffer on failures. + + +## Setup + +### Prerequisites + +#### + +- Netdata and the external storage provider of your choice, installed, configured and operational. +- `protobuf` and `snappy` libraries installed. +- Netdata reinstalled after the libraries. + + + +### Configuration + +#### File + +The configuration file name for this integration is `exporting.conf`. + + +You can edit the configuration file using the `edit-config` script from the +Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#the-netdata-config-directory). + +```bash +cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata +sudo ./edit-config exporting.conf +``` +#### Options + +The following options can be defined for this exporter. + +
Config options + +| Name | Description | Default | Required | +|:----|:-----------|:-------|:--------:| +| enabled | Enables or disables an exporting connector instance (yes/no). | no | yes | +| destination | Accepts a space separated list of hostnames, IPs (IPv4 and IPv6) and ports to connect to. Netdata will use the first available to send the metrics. | no | yes | +| username | Username for HTTP authentication | my_username | no | +| password | Password for HTTP authentication | my_password | no | +| data source | Selects the kind of data that will be sent to the external database. (as collected/average/sum) | | no | +| hostname | The hostname to be used for sending data to the external database server. | [global].hostname | no | +| prefix | The prefix to add to all metrics. | netdata | no | +| update every | Frequency of sending sending data to the external database, in seconds. | 10 | no | +| buffer on failures | The number of iterations (`update every` seconds) to buffer data, when the external database server is not available. | 10 | no | +| timeout ms | The timeout in milliseconds to wait for the external database server to process the data. | 20000 | no | +| send hosts matching | Hosts filter. Determines which hosts will be sent to the external database. The syntax is [simple patterns](https://github.com/netdata/netdata/tree/master/libnetdata/simple_pattern#simple-patterns). | localhost * | no | +| send charts matching | One or more space separated patterns (use * as wildcard) checked against both chart id and chart name. | * | no | +| send names instead of ids | Controls the metric names Netdata should send to the external database (yes/no). | | no | +| send configured labels | Controls if host labels defined in the `[host labels]` section in `netdata.conf` should be sent to the external database (yes/no). | | no | +| send automatic labels | Controls if automatically created labels, like `_os_name` or `_architecture` should be sent to the external database (yes/no). | | no | + +##### destination + +The format of each item in this list, is: [PROTOCOL:]IP[:PORT]. +- PROTOCOL can be udp or tcp. tcp is the default and only supported by the current exporting engine. +- IP can be XX.XX.XX.XX (IPv4), or [XX:XX...XX:XX] (IPv6). For IPv6 you can to enclose the IP in [] to separate it from the port. +- PORT can be a number of a service name. If omitted, the default port for the exporting connector will be used. + +Example IPv4: + ```yaml + destination = 10.11.14.2:2003 10.11.14.3:4242 10.11.14.4:2003 + ``` +Example IPv6 and IPv4 together: +```yaml +destination = [ffff:...:0001]:2003 10.11.12.1:2003 +``` +When multiple servers are defined, Netdata will try the next one when the previous one fails. + + +##### update every + +Netdata will add some randomness to this number, to prevent stressing the external server when many Netdata servers +send data to the same database. This randomness does not affect the quality of the data, only the time they are sent. + + +##### buffer on failures + +If the server fails to receive the data after that many failures, data loss on the connector instance is expected (Netdata will also log it). + + +##### send hosts matching + +Includes one or more space separated patterns, using * as wildcard (any number of times within each pattern). +The patterns are checked against the hostname (the localhost is always checked as localhost), allowing us to +filter which hosts will be sent to the external database when this Netdata is a central Netdata aggregating multiple hosts. + +A pattern starting with `!` gives a negative match. So to match all hosts named `*db*` except hosts containing `*child*`, +use `!*child* *db*` (so, the order is important: the first pattern matching the hostname will be used - positive or negative). + + +##### send charts matching + +A pattern starting with ! gives a negative match. So to match all charts named apps.* except charts ending in *reads, +use !*reads apps.* (so, the order is important: the first pattern matching the chart id or the chart name will be used, +positive or negative). There is also a URL parameter filter that can be used while querying allmetrics. The URL parameter +has a higher priority than the configuration option. + + +##### send names instead of ids + +Netdata supports names and IDs for charts and dimensions. Usually IDs are unique identifiers as read by the system and names +are human friendly labels (also unique). Most charts and metrics have the same ID and name, but in several cases they are +different : disks with device-mapper, interrupts, QoS classes, statsd synthetic charts, etc. + + +
+ +#### Examples + +##### Example configuration + +Basic example configuration for Prometheus remote write. + +```yaml +[prometheus_remote_write:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + +``` +##### Example configuration with HTTPS and HTTP authentication + +Add `:https` modifier to the connector type if you need to use the TLS/SSL protocol. For example: `remote_write:https:my_instance`. + +```yaml +[prometheus_remote_write:https:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + username = my_username + password = my_password + +``` + diff --git a/exporting/prometheus/integrations/postgresql.md b/exporting/prometheus/integrations/postgresql.md new file mode 100644 index 00000000..a1b81339 --- /dev/null +++ b/exporting/prometheus/integrations/postgresql.md @@ -0,0 +1,158 @@ + + +# PostgreSQL + + + + + +Use the Prometheus remote write exporting connector to archive your Netdata metrics to the external storage provider of your choice for long-term storage and further analysis. + + + + +## Limitations + +The remote write exporting connector does not support buffer on failures. + + +## Setup + +### Prerequisites + +#### + +- Netdata and the external storage provider of your choice, installed, configured and operational. +- `protobuf` and `snappy` libraries installed. +- Netdata reinstalled after the libraries. + + + +### Configuration + +#### File + +The configuration file name for this integration is `exporting.conf`. + + +You can edit the configuration file using the `edit-config` script from the +Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#the-netdata-config-directory). + +```bash +cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata +sudo ./edit-config exporting.conf +``` +#### Options + +The following options can be defined for this exporter. + +
Config options + +| Name | Description | Default | Required | +|:----|:-----------|:-------|:--------:| +| enabled | Enables or disables an exporting connector instance (yes/no). | no | yes | +| destination | Accepts a space separated list of hostnames, IPs (IPv4 and IPv6) and ports to connect to. Netdata will use the first available to send the metrics. | no | yes | +| username | Username for HTTP authentication | my_username | no | +| password | Password for HTTP authentication | my_password | no | +| data source | Selects the kind of data that will be sent to the external database. (as collected/average/sum) | | no | +| hostname | The hostname to be used for sending data to the external database server. | [global].hostname | no | +| prefix | The prefix to add to all metrics. | netdata | no | +| update every | Frequency of sending sending data to the external database, in seconds. | 10 | no | +| buffer on failures | The number of iterations (`update every` seconds) to buffer data, when the external database server is not available. | 10 | no | +| timeout ms | The timeout in milliseconds to wait for the external database server to process the data. | 20000 | no | +| send hosts matching | Hosts filter. Determines which hosts will be sent to the external database. The syntax is [simple patterns](https://github.com/netdata/netdata/tree/master/libnetdata/simple_pattern#simple-patterns). | localhost * | no | +| send charts matching | One or more space separated patterns (use * as wildcard) checked against both chart id and chart name. | * | no | +| send names instead of ids | Controls the metric names Netdata should send to the external database (yes/no). | | no | +| send configured labels | Controls if host labels defined in the `[host labels]` section in `netdata.conf` should be sent to the external database (yes/no). | | no | +| send automatic labels | Controls if automatically created labels, like `_os_name` or `_architecture` should be sent to the external database (yes/no). | | no | + +##### destination + +The format of each item in this list, is: [PROTOCOL:]IP[:PORT]. +- PROTOCOL can be udp or tcp. tcp is the default and only supported by the current exporting engine. +- IP can be XX.XX.XX.XX (IPv4), or [XX:XX...XX:XX] (IPv6). For IPv6 you can to enclose the IP in [] to separate it from the port. +- PORT can be a number of a service name. If omitted, the default port for the exporting connector will be used. + +Example IPv4: + ```yaml + destination = 10.11.14.2:2003 10.11.14.3:4242 10.11.14.4:2003 + ``` +Example IPv6 and IPv4 together: +```yaml +destination = [ffff:...:0001]:2003 10.11.12.1:2003 +``` +When multiple servers are defined, Netdata will try the next one when the previous one fails. + + +##### update every + +Netdata will add some randomness to this number, to prevent stressing the external server when many Netdata servers +send data to the same database. This randomness does not affect the quality of the data, only the time they are sent. + + +##### buffer on failures + +If the server fails to receive the data after that many failures, data loss on the connector instance is expected (Netdata will also log it). + + +##### send hosts matching + +Includes one or more space separated patterns, using * as wildcard (any number of times within each pattern). +The patterns are checked against the hostname (the localhost is always checked as localhost), allowing us to +filter which hosts will be sent to the external database when this Netdata is a central Netdata aggregating multiple hosts. + +A pattern starting with `!` gives a negative match. So to match all hosts named `*db*` except hosts containing `*child*`, +use `!*child* *db*` (so, the order is important: the first pattern matching the hostname will be used - positive or negative). + + +##### send charts matching + +A pattern starting with ! gives a negative match. So to match all charts named apps.* except charts ending in *reads, +use !*reads apps.* (so, the order is important: the first pattern matching the chart id or the chart name will be used, +positive or negative). There is also a URL parameter filter that can be used while querying allmetrics. The URL parameter +has a higher priority than the configuration option. + + +##### send names instead of ids + +Netdata supports names and IDs for charts and dimensions. Usually IDs are unique identifiers as read by the system and names +are human friendly labels (also unique). Most charts and metrics have the same ID and name, but in several cases they are +different : disks with device-mapper, interrupts, QoS classes, statsd synthetic charts, etc. + + +
+ +#### Examples + +##### Example configuration + +Basic example configuration for Prometheus remote write. + +```yaml +[prometheus_remote_write:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + +``` +##### Example configuration with HTTPS and HTTP authentication + +Add `:https` modifier to the connector type if you need to use the TLS/SSL protocol. For example: `remote_write:https:my_instance`. + +```yaml +[prometheus_remote_write:https:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + username = my_username + password = my_password + +``` + diff --git a/exporting/prometheus/integrations/prometheus_remote_write.md b/exporting/prometheus/integrations/prometheus_remote_write.md new file mode 100644 index 00000000..b9ce730e --- /dev/null +++ b/exporting/prometheus/integrations/prometheus_remote_write.md @@ -0,0 +1,158 @@ + + +# Prometheus Remote Write + + + + + +Use the Prometheus remote write exporting connector to archive your Netdata metrics to the external storage provider of your choice for long-term storage and further analysis. + + + + +## Limitations + +The remote write exporting connector does not support buffer on failures. + + +## Setup + +### Prerequisites + +#### + +- Netdata and the external storage provider of your choice, installed, configured and operational. +- `protobuf` and `snappy` libraries installed. +- Netdata reinstalled after the libraries. + + + +### Configuration + +#### File + +The configuration file name for this integration is `exporting.conf`. + + +You can edit the configuration file using the `edit-config` script from the +Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#the-netdata-config-directory). + +```bash +cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata +sudo ./edit-config exporting.conf +``` +#### Options + +The following options can be defined for this exporter. + +
Config options + +| Name | Description | Default | Required | +|:----|:-----------|:-------|:--------:| +| enabled | Enables or disables an exporting connector instance (yes/no). | no | yes | +| destination | Accepts a space separated list of hostnames, IPs (IPv4 and IPv6) and ports to connect to. Netdata will use the first available to send the metrics. | no | yes | +| username | Username for HTTP authentication | my_username | no | +| password | Password for HTTP authentication | my_password | no | +| data source | Selects the kind of data that will be sent to the external database. (as collected/average/sum) | | no | +| hostname | The hostname to be used for sending data to the external database server. | [global].hostname | no | +| prefix | The prefix to add to all metrics. | netdata | no | +| update every | Frequency of sending sending data to the external database, in seconds. | 10 | no | +| buffer on failures | The number of iterations (`update every` seconds) to buffer data, when the external database server is not available. | 10 | no | +| timeout ms | The timeout in milliseconds to wait for the external database server to process the data. | 20000 | no | +| send hosts matching | Hosts filter. Determines which hosts will be sent to the external database. The syntax is [simple patterns](https://github.com/netdata/netdata/tree/master/libnetdata/simple_pattern#simple-patterns). | localhost * | no | +| send charts matching | One or more space separated patterns (use * as wildcard) checked against both chart id and chart name. | * | no | +| send names instead of ids | Controls the metric names Netdata should send to the external database (yes/no). | | no | +| send configured labels | Controls if host labels defined in the `[host labels]` section in `netdata.conf` should be sent to the external database (yes/no). | | no | +| send automatic labels | Controls if automatically created labels, like `_os_name` or `_architecture` should be sent to the external database (yes/no). | | no | + +##### destination + +The format of each item in this list, is: [PROTOCOL:]IP[:PORT]. +- PROTOCOL can be udp or tcp. tcp is the default and only supported by the current exporting engine. +- IP can be XX.XX.XX.XX (IPv4), or [XX:XX...XX:XX] (IPv6). For IPv6 you can to enclose the IP in [] to separate it from the port. +- PORT can be a number of a service name. If omitted, the default port for the exporting connector will be used. + +Example IPv4: + ```yaml + destination = 10.11.14.2:2003 10.11.14.3:4242 10.11.14.4:2003 + ``` +Example IPv6 and IPv4 together: +```yaml +destination = [ffff:...:0001]:2003 10.11.12.1:2003 +``` +When multiple servers are defined, Netdata will try the next one when the previous one fails. + + +##### update every + +Netdata will add some randomness to this number, to prevent stressing the external server when many Netdata servers +send data to the same database. This randomness does not affect the quality of the data, only the time they are sent. + + +##### buffer on failures + +If the server fails to receive the data after that many failures, data loss on the connector instance is expected (Netdata will also log it). + + +##### send hosts matching + +Includes one or more space separated patterns, using * as wildcard (any number of times within each pattern). +The patterns are checked against the hostname (the localhost is always checked as localhost), allowing us to +filter which hosts will be sent to the external database when this Netdata is a central Netdata aggregating multiple hosts. + +A pattern starting with `!` gives a negative match. So to match all hosts named `*db*` except hosts containing `*child*`, +use `!*child* *db*` (so, the order is important: the first pattern matching the hostname will be used - positive or negative). + + +##### send charts matching + +A pattern starting with ! gives a negative match. So to match all charts named apps.* except charts ending in *reads, +use !*reads apps.* (so, the order is important: the first pattern matching the chart id or the chart name will be used, +positive or negative). There is also a URL parameter filter that can be used while querying allmetrics. The URL parameter +has a higher priority than the configuration option. + + +##### send names instead of ids + +Netdata supports names and IDs for charts and dimensions. Usually IDs are unique identifiers as read by the system and names +are human friendly labels (also unique). Most charts and metrics have the same ID and name, but in several cases they are +different : disks with device-mapper, interrupts, QoS classes, statsd synthetic charts, etc. + + +
+ +#### Examples + +##### Example configuration + +Basic example configuration for Prometheus remote write. + +```yaml +[prometheus_remote_write:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + +``` +##### Example configuration with HTTPS and HTTP authentication + +Add `:https` modifier to the connector type if you need to use the TLS/SSL protocol. For example: `remote_write:https:my_instance`. + +```yaml +[prometheus_remote_write:https:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + username = my_username + password = my_password + +``` + diff --git a/exporting/prometheus/integrations/quasardb.md b/exporting/prometheus/integrations/quasardb.md new file mode 100644 index 00000000..48d2419e --- /dev/null +++ b/exporting/prometheus/integrations/quasardb.md @@ -0,0 +1,158 @@ + + +# QuasarDB + + + + + +Use the Prometheus remote write exporting connector to archive your Netdata metrics to the external storage provider of your choice for long-term storage and further analysis. + + + + +## Limitations + +The remote write exporting connector does not support buffer on failures. + + +## Setup + +### Prerequisites + +#### + +- Netdata and the external storage provider of your choice, installed, configured and operational. +- `protobuf` and `snappy` libraries installed. +- Netdata reinstalled after the libraries. + + + +### Configuration + +#### File + +The configuration file name for this integration is `exporting.conf`. + + +You can edit the configuration file using the `edit-config` script from the +Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#the-netdata-config-directory). + +```bash +cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata +sudo ./edit-config exporting.conf +``` +#### Options + +The following options can be defined for this exporter. + +
Config options + +| Name | Description | Default | Required | +|:----|:-----------|:-------|:--------:| +| enabled | Enables or disables an exporting connector instance (yes/no). | no | yes | +| destination | Accepts a space separated list of hostnames, IPs (IPv4 and IPv6) and ports to connect to. Netdata will use the first available to send the metrics. | no | yes | +| username | Username for HTTP authentication | my_username | no | +| password | Password for HTTP authentication | my_password | no | +| data source | Selects the kind of data that will be sent to the external database. (as collected/average/sum) | | no | +| hostname | The hostname to be used for sending data to the external database server. | [global].hostname | no | +| prefix | The prefix to add to all metrics. | netdata | no | +| update every | Frequency of sending sending data to the external database, in seconds. | 10 | no | +| buffer on failures | The number of iterations (`update every` seconds) to buffer data, when the external database server is not available. | 10 | no | +| timeout ms | The timeout in milliseconds to wait for the external database server to process the data. | 20000 | no | +| send hosts matching | Hosts filter. Determines which hosts will be sent to the external database. The syntax is [simple patterns](https://github.com/netdata/netdata/tree/master/libnetdata/simple_pattern#simple-patterns). | localhost * | no | +| send charts matching | One or more space separated patterns (use * as wildcard) checked against both chart id and chart name. | * | no | +| send names instead of ids | Controls the metric names Netdata should send to the external database (yes/no). | | no | +| send configured labels | Controls if host labels defined in the `[host labels]` section in `netdata.conf` should be sent to the external database (yes/no). | | no | +| send automatic labels | Controls if automatically created labels, like `_os_name` or `_architecture` should be sent to the external database (yes/no). | | no | + +##### destination + +The format of each item in this list, is: [PROTOCOL:]IP[:PORT]. +- PROTOCOL can be udp or tcp. tcp is the default and only supported by the current exporting engine. +- IP can be XX.XX.XX.XX (IPv4), or [XX:XX...XX:XX] (IPv6). For IPv6 you can to enclose the IP in [] to separate it from the port. +- PORT can be a number of a service name. If omitted, the default port for the exporting connector will be used. + +Example IPv4: + ```yaml + destination = 10.11.14.2:2003 10.11.14.3:4242 10.11.14.4:2003 + ``` +Example IPv6 and IPv4 together: +```yaml +destination = [ffff:...:0001]:2003 10.11.12.1:2003 +``` +When multiple servers are defined, Netdata will try the next one when the previous one fails. + + +##### update every + +Netdata will add some randomness to this number, to prevent stressing the external server when many Netdata servers +send data to the same database. This randomness does not affect the quality of the data, only the time they are sent. + + +##### buffer on failures + +If the server fails to receive the data after that many failures, data loss on the connector instance is expected (Netdata will also log it). + + +##### send hosts matching + +Includes one or more space separated patterns, using * as wildcard (any number of times within each pattern). +The patterns are checked against the hostname (the localhost is always checked as localhost), allowing us to +filter which hosts will be sent to the external database when this Netdata is a central Netdata aggregating multiple hosts. + +A pattern starting with `!` gives a negative match. So to match all hosts named `*db*` except hosts containing `*child*`, +use `!*child* *db*` (so, the order is important: the first pattern matching the hostname will be used - positive or negative). + + +##### send charts matching + +A pattern starting with ! gives a negative match. So to match all charts named apps.* except charts ending in *reads, +use !*reads apps.* (so, the order is important: the first pattern matching the chart id or the chart name will be used, +positive or negative). There is also a URL parameter filter that can be used while querying allmetrics. The URL parameter +has a higher priority than the configuration option. + + +##### send names instead of ids + +Netdata supports names and IDs for charts and dimensions. Usually IDs are unique identifiers as read by the system and names +are human friendly labels (also unique). Most charts and metrics have the same ID and name, but in several cases they are +different : disks with device-mapper, interrupts, QoS classes, statsd synthetic charts, etc. + + +
+ +#### Examples + +##### Example configuration + +Basic example configuration for Prometheus remote write. + +```yaml +[prometheus_remote_write:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + +``` +##### Example configuration with HTTPS and HTTP authentication + +Add `:https` modifier to the connector type if you need to use the TLS/SSL protocol. For example: `remote_write:https:my_instance`. + +```yaml +[prometheus_remote_write:https:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + username = my_username + password = my_password + +``` + diff --git a/exporting/prometheus/integrations/splunk_signalfx.md b/exporting/prometheus/integrations/splunk_signalfx.md new file mode 100644 index 00000000..324101b2 --- /dev/null +++ b/exporting/prometheus/integrations/splunk_signalfx.md @@ -0,0 +1,158 @@ + + +# Splunk SignalFx + + + + + +Use the Prometheus remote write exporting connector to archive your Netdata metrics to the external storage provider of your choice for long-term storage and further analysis. + + + + +## Limitations + +The remote write exporting connector does not support buffer on failures. + + +## Setup + +### Prerequisites + +#### + +- Netdata and the external storage provider of your choice, installed, configured and operational. +- `protobuf` and `snappy` libraries installed. +- Netdata reinstalled after the libraries. + + + +### Configuration + +#### File + +The configuration file name for this integration is `exporting.conf`. + + +You can edit the configuration file using the `edit-config` script from the +Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#the-netdata-config-directory). + +```bash +cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata +sudo ./edit-config exporting.conf +``` +#### Options + +The following options can be defined for this exporter. + +
Config options + +| Name | Description | Default | Required | +|:----|:-----------|:-------|:--------:| +| enabled | Enables or disables an exporting connector instance (yes/no). | no | yes | +| destination | Accepts a space separated list of hostnames, IPs (IPv4 and IPv6) and ports to connect to. Netdata will use the first available to send the metrics. | no | yes | +| username | Username for HTTP authentication | my_username | no | +| password | Password for HTTP authentication | my_password | no | +| data source | Selects the kind of data that will be sent to the external database. (as collected/average/sum) | | no | +| hostname | The hostname to be used for sending data to the external database server. | [global].hostname | no | +| prefix | The prefix to add to all metrics. | netdata | no | +| update every | Frequency of sending sending data to the external database, in seconds. | 10 | no | +| buffer on failures | The number of iterations (`update every` seconds) to buffer data, when the external database server is not available. | 10 | no | +| timeout ms | The timeout in milliseconds to wait for the external database server to process the data. | 20000 | no | +| send hosts matching | Hosts filter. Determines which hosts will be sent to the external database. The syntax is [simple patterns](https://github.com/netdata/netdata/tree/master/libnetdata/simple_pattern#simple-patterns). | localhost * | no | +| send charts matching | One or more space separated patterns (use * as wildcard) checked against both chart id and chart name. | * | no | +| send names instead of ids | Controls the metric names Netdata should send to the external database (yes/no). | | no | +| send configured labels | Controls if host labels defined in the `[host labels]` section in `netdata.conf` should be sent to the external database (yes/no). | | no | +| send automatic labels | Controls if automatically created labels, like `_os_name` or `_architecture` should be sent to the external database (yes/no). | | no | + +##### destination + +The format of each item in this list, is: [PROTOCOL:]IP[:PORT]. +- PROTOCOL can be udp or tcp. tcp is the default and only supported by the current exporting engine. +- IP can be XX.XX.XX.XX (IPv4), or [XX:XX...XX:XX] (IPv6). For IPv6 you can to enclose the IP in [] to separate it from the port. +- PORT can be a number of a service name. If omitted, the default port for the exporting connector will be used. + +Example IPv4: + ```yaml + destination = 10.11.14.2:2003 10.11.14.3:4242 10.11.14.4:2003 + ``` +Example IPv6 and IPv4 together: +```yaml +destination = [ffff:...:0001]:2003 10.11.12.1:2003 +``` +When multiple servers are defined, Netdata will try the next one when the previous one fails. + + +##### update every + +Netdata will add some randomness to this number, to prevent stressing the external server when many Netdata servers +send data to the same database. This randomness does not affect the quality of the data, only the time they are sent. + + +##### buffer on failures + +If the server fails to receive the data after that many failures, data loss on the connector instance is expected (Netdata will also log it). + + +##### send hosts matching + +Includes one or more space separated patterns, using * as wildcard (any number of times within each pattern). +The patterns are checked against the hostname (the localhost is always checked as localhost), allowing us to +filter which hosts will be sent to the external database when this Netdata is a central Netdata aggregating multiple hosts. + +A pattern starting with `!` gives a negative match. So to match all hosts named `*db*` except hosts containing `*child*`, +use `!*child* *db*` (so, the order is important: the first pattern matching the hostname will be used - positive or negative). + + +##### send charts matching + +A pattern starting with ! gives a negative match. So to match all charts named apps.* except charts ending in *reads, +use !*reads apps.* (so, the order is important: the first pattern matching the chart id or the chart name will be used, +positive or negative). There is also a URL parameter filter that can be used while querying allmetrics. The URL parameter +has a higher priority than the configuration option. + + +##### send names instead of ids + +Netdata supports names and IDs for charts and dimensions. Usually IDs are unique identifiers as read by the system and names +are human friendly labels (also unique). Most charts and metrics have the same ID and name, but in several cases they are +different : disks with device-mapper, interrupts, QoS classes, statsd synthetic charts, etc. + + +
+ +#### Examples + +##### Example configuration + +Basic example configuration for Prometheus remote write. + +```yaml +[prometheus_remote_write:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + +``` +##### Example configuration with HTTPS and HTTP authentication + +Add `:https` modifier to the connector type if you need to use the TLS/SSL protocol. For example: `remote_write:https:my_instance`. + +```yaml +[prometheus_remote_write:https:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + username = my_username + password = my_password + +``` + diff --git a/exporting/prometheus/integrations/thanos.md b/exporting/prometheus/integrations/thanos.md new file mode 100644 index 00000000..77fe1159 --- /dev/null +++ b/exporting/prometheus/integrations/thanos.md @@ -0,0 +1,158 @@ + + +# Thanos + + + + + +Use the Prometheus remote write exporting connector to archive your Netdata metrics to the external storage provider of your choice for long-term storage and further analysis. + + + + +## Limitations + +The remote write exporting connector does not support buffer on failures. + + +## Setup + +### Prerequisites + +#### + +- Netdata and the external storage provider of your choice, installed, configured and operational. +- `protobuf` and `snappy` libraries installed. +- Netdata reinstalled after the libraries. + + + +### Configuration + +#### File + +The configuration file name for this integration is `exporting.conf`. + + +You can edit the configuration file using the `edit-config` script from the +Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#the-netdata-config-directory). + +```bash +cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata +sudo ./edit-config exporting.conf +``` +#### Options + +The following options can be defined for this exporter. + +
Config options + +| Name | Description | Default | Required | +|:----|:-----------|:-------|:--------:| +| enabled | Enables or disables an exporting connector instance (yes/no). | no | yes | +| destination | Accepts a space separated list of hostnames, IPs (IPv4 and IPv6) and ports to connect to. Netdata will use the first available to send the metrics. | no | yes | +| username | Username for HTTP authentication | my_username | no | +| password | Password for HTTP authentication | my_password | no | +| data source | Selects the kind of data that will be sent to the external database. (as collected/average/sum) | | no | +| hostname | The hostname to be used for sending data to the external database server. | [global].hostname | no | +| prefix | The prefix to add to all metrics. | netdata | no | +| update every | Frequency of sending sending data to the external database, in seconds. | 10 | no | +| buffer on failures | The number of iterations (`update every` seconds) to buffer data, when the external database server is not available. | 10 | no | +| timeout ms | The timeout in milliseconds to wait for the external database server to process the data. | 20000 | no | +| send hosts matching | Hosts filter. Determines which hosts will be sent to the external database. The syntax is [simple patterns](https://github.com/netdata/netdata/tree/master/libnetdata/simple_pattern#simple-patterns). | localhost * | no | +| send charts matching | One or more space separated patterns (use * as wildcard) checked against both chart id and chart name. | * | no | +| send names instead of ids | Controls the metric names Netdata should send to the external database (yes/no). | | no | +| send configured labels | Controls if host labels defined in the `[host labels]` section in `netdata.conf` should be sent to the external database (yes/no). | | no | +| send automatic labels | Controls if automatically created labels, like `_os_name` or `_architecture` should be sent to the external database (yes/no). | | no | + +##### destination + +The format of each item in this list, is: [PROTOCOL:]IP[:PORT]. +- PROTOCOL can be udp or tcp. tcp is the default and only supported by the current exporting engine. +- IP can be XX.XX.XX.XX (IPv4), or [XX:XX...XX:XX] (IPv6). For IPv6 you can to enclose the IP in [] to separate it from the port. +- PORT can be a number of a service name. If omitted, the default port for the exporting connector will be used. + +Example IPv4: + ```yaml + destination = 10.11.14.2:2003 10.11.14.3:4242 10.11.14.4:2003 + ``` +Example IPv6 and IPv4 together: +```yaml +destination = [ffff:...:0001]:2003 10.11.12.1:2003 +``` +When multiple servers are defined, Netdata will try the next one when the previous one fails. + + +##### update every + +Netdata will add some randomness to this number, to prevent stressing the external server when many Netdata servers +send data to the same database. This randomness does not affect the quality of the data, only the time they are sent. + + +##### buffer on failures + +If the server fails to receive the data after that many failures, data loss on the connector instance is expected (Netdata will also log it). + + +##### send hosts matching + +Includes one or more space separated patterns, using * as wildcard (any number of times within each pattern). +The patterns are checked against the hostname (the localhost is always checked as localhost), allowing us to +filter which hosts will be sent to the external database when this Netdata is a central Netdata aggregating multiple hosts. + +A pattern starting with `!` gives a negative match. So to match all hosts named `*db*` except hosts containing `*child*`, +use `!*child* *db*` (so, the order is important: the first pattern matching the hostname will be used - positive or negative). + + +##### send charts matching + +A pattern starting with ! gives a negative match. So to match all charts named apps.* except charts ending in *reads, +use !*reads apps.* (so, the order is important: the first pattern matching the chart id or the chart name will be used, +positive or negative). There is also a URL parameter filter that can be used while querying allmetrics. The URL parameter +has a higher priority than the configuration option. + + +##### send names instead of ids + +Netdata supports names and IDs for charts and dimensions. Usually IDs are unique identifiers as read by the system and names +are human friendly labels (also unique). Most charts and metrics have the same ID and name, but in several cases they are +different : disks with device-mapper, interrupts, QoS classes, statsd synthetic charts, etc. + + +
+ +#### Examples + +##### Example configuration + +Basic example configuration for Prometheus remote write. + +```yaml +[prometheus_remote_write:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + +``` +##### Example configuration with HTTPS and HTTP authentication + +Add `:https` modifier to the connector type if you need to use the TLS/SSL protocol. For example: `remote_write:https:my_instance`. + +```yaml +[prometheus_remote_write:https:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + username = my_username + password = my_password + +``` + diff --git a/exporting/prometheus/integrations/tikv.md b/exporting/prometheus/integrations/tikv.md new file mode 100644 index 00000000..656ee695 --- /dev/null +++ b/exporting/prometheus/integrations/tikv.md @@ -0,0 +1,158 @@ + + +# TiKV + + + + + +Use the Prometheus remote write exporting connector to archive your Netdata metrics to the external storage provider of your choice for long-term storage and further analysis. + + + + +## Limitations + +The remote write exporting connector does not support buffer on failures. + + +## Setup + +### Prerequisites + +#### + +- Netdata and the external storage provider of your choice, installed, configured and operational. +- `protobuf` and `snappy` libraries installed. +- Netdata reinstalled after the libraries. + + + +### Configuration + +#### File + +The configuration file name for this integration is `exporting.conf`. + + +You can edit the configuration file using the `edit-config` script from the +Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#the-netdata-config-directory). + +```bash +cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata +sudo ./edit-config exporting.conf +``` +#### Options + +The following options can be defined for this exporter. + +
Config options + +| Name | Description | Default | Required | +|:----|:-----------|:-------|:--------:| +| enabled | Enables or disables an exporting connector instance (yes/no). | no | yes | +| destination | Accepts a space separated list of hostnames, IPs (IPv4 and IPv6) and ports to connect to. Netdata will use the first available to send the metrics. | no | yes | +| username | Username for HTTP authentication | my_username | no | +| password | Password for HTTP authentication | my_password | no | +| data source | Selects the kind of data that will be sent to the external database. (as collected/average/sum) | | no | +| hostname | The hostname to be used for sending data to the external database server. | [global].hostname | no | +| prefix | The prefix to add to all metrics. | netdata | no | +| update every | Frequency of sending sending data to the external database, in seconds. | 10 | no | +| buffer on failures | The number of iterations (`update every` seconds) to buffer data, when the external database server is not available. | 10 | no | +| timeout ms | The timeout in milliseconds to wait for the external database server to process the data. | 20000 | no | +| send hosts matching | Hosts filter. Determines which hosts will be sent to the external database. The syntax is [simple patterns](https://github.com/netdata/netdata/tree/master/libnetdata/simple_pattern#simple-patterns). | localhost * | no | +| send charts matching | One or more space separated patterns (use * as wildcard) checked against both chart id and chart name. | * | no | +| send names instead of ids | Controls the metric names Netdata should send to the external database (yes/no). | | no | +| send configured labels | Controls if host labels defined in the `[host labels]` section in `netdata.conf` should be sent to the external database (yes/no). | | no | +| send automatic labels | Controls if automatically created labels, like `_os_name` or `_architecture` should be sent to the external database (yes/no). | | no | + +##### destination + +The format of each item in this list, is: [PROTOCOL:]IP[:PORT]. +- PROTOCOL can be udp or tcp. tcp is the default and only supported by the current exporting engine. +- IP can be XX.XX.XX.XX (IPv4), or [XX:XX...XX:XX] (IPv6). For IPv6 you can to enclose the IP in [] to separate it from the port. +- PORT can be a number of a service name. If omitted, the default port for the exporting connector will be used. + +Example IPv4: + ```yaml + destination = 10.11.14.2:2003 10.11.14.3:4242 10.11.14.4:2003 + ``` +Example IPv6 and IPv4 together: +```yaml +destination = [ffff:...:0001]:2003 10.11.12.1:2003 +``` +When multiple servers are defined, Netdata will try the next one when the previous one fails. + + +##### update every + +Netdata will add some randomness to this number, to prevent stressing the external server when many Netdata servers +send data to the same database. This randomness does not affect the quality of the data, only the time they are sent. + + +##### buffer on failures + +If the server fails to receive the data after that many failures, data loss on the connector instance is expected (Netdata will also log it). + + +##### send hosts matching + +Includes one or more space separated patterns, using * as wildcard (any number of times within each pattern). +The patterns are checked against the hostname (the localhost is always checked as localhost), allowing us to +filter which hosts will be sent to the external database when this Netdata is a central Netdata aggregating multiple hosts. + +A pattern starting with `!` gives a negative match. So to match all hosts named `*db*` except hosts containing `*child*`, +use `!*child* *db*` (so, the order is important: the first pattern matching the hostname will be used - positive or negative). + + +##### send charts matching + +A pattern starting with ! gives a negative match. So to match all charts named apps.* except charts ending in *reads, +use !*reads apps.* (so, the order is important: the first pattern matching the chart id or the chart name will be used, +positive or negative). There is also a URL parameter filter that can be used while querying allmetrics. The URL parameter +has a higher priority than the configuration option. + + +##### send names instead of ids + +Netdata supports names and IDs for charts and dimensions. Usually IDs are unique identifiers as read by the system and names +are human friendly labels (also unique). Most charts and metrics have the same ID and name, but in several cases they are +different : disks with device-mapper, interrupts, QoS classes, statsd synthetic charts, etc. + + +
+ +#### Examples + +##### Example configuration + +Basic example configuration for Prometheus remote write. + +```yaml +[prometheus_remote_write:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + +``` +##### Example configuration with HTTPS and HTTP authentication + +Add `:https` modifier to the connector type if you need to use the TLS/SSL protocol. For example: `remote_write:https:my_instance`. + +```yaml +[prometheus_remote_write:https:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + username = my_username + password = my_password + +``` + diff --git a/exporting/prometheus/integrations/timescaledb.md b/exporting/prometheus/integrations/timescaledb.md new file mode 100644 index 00000000..681a0a61 --- /dev/null +++ b/exporting/prometheus/integrations/timescaledb.md @@ -0,0 +1,158 @@ + + +# TimescaleDB + + + + + +Use the Prometheus remote write exporting connector to archive your Netdata metrics to the external storage provider of your choice for long-term storage and further analysis. + + + + +## Limitations + +The remote write exporting connector does not support buffer on failures. + + +## Setup + +### Prerequisites + +#### + +- Netdata and the external storage provider of your choice, installed, configured and operational. +- `protobuf` and `snappy` libraries installed. +- Netdata reinstalled after the libraries. + + + +### Configuration + +#### File + +The configuration file name for this integration is `exporting.conf`. + + +You can edit the configuration file using the `edit-config` script from the +Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#the-netdata-config-directory). + +```bash +cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata +sudo ./edit-config exporting.conf +``` +#### Options + +The following options can be defined for this exporter. + +
Config options + +| Name | Description | Default | Required | +|:----|:-----------|:-------|:--------:| +| enabled | Enables or disables an exporting connector instance (yes/no). | no | yes | +| destination | Accepts a space separated list of hostnames, IPs (IPv4 and IPv6) and ports to connect to. Netdata will use the first available to send the metrics. | no | yes | +| username | Username for HTTP authentication | my_username | no | +| password | Password for HTTP authentication | my_password | no | +| data source | Selects the kind of data that will be sent to the external database. (as collected/average/sum) | | no | +| hostname | The hostname to be used for sending data to the external database server. | [global].hostname | no | +| prefix | The prefix to add to all metrics. | netdata | no | +| update every | Frequency of sending sending data to the external database, in seconds. | 10 | no | +| buffer on failures | The number of iterations (`update every` seconds) to buffer data, when the external database server is not available. | 10 | no | +| timeout ms | The timeout in milliseconds to wait for the external database server to process the data. | 20000 | no | +| send hosts matching | Hosts filter. Determines which hosts will be sent to the external database. The syntax is [simple patterns](https://github.com/netdata/netdata/tree/master/libnetdata/simple_pattern#simple-patterns). | localhost * | no | +| send charts matching | One or more space separated patterns (use * as wildcard) checked against both chart id and chart name. | * | no | +| send names instead of ids | Controls the metric names Netdata should send to the external database (yes/no). | | no | +| send configured labels | Controls if host labels defined in the `[host labels]` section in `netdata.conf` should be sent to the external database (yes/no). | | no | +| send automatic labels | Controls if automatically created labels, like `_os_name` or `_architecture` should be sent to the external database (yes/no). | | no | + +##### destination + +The format of each item in this list, is: [PROTOCOL:]IP[:PORT]. +- PROTOCOL can be udp or tcp. tcp is the default and only supported by the current exporting engine. +- IP can be XX.XX.XX.XX (IPv4), or [XX:XX...XX:XX] (IPv6). For IPv6 you can to enclose the IP in [] to separate it from the port. +- PORT can be a number of a service name. If omitted, the default port for the exporting connector will be used. + +Example IPv4: + ```yaml + destination = 10.11.14.2:2003 10.11.14.3:4242 10.11.14.4:2003 + ``` +Example IPv6 and IPv4 together: +```yaml +destination = [ffff:...:0001]:2003 10.11.12.1:2003 +``` +When multiple servers are defined, Netdata will try the next one when the previous one fails. + + +##### update every + +Netdata will add some randomness to this number, to prevent stressing the external server when many Netdata servers +send data to the same database. This randomness does not affect the quality of the data, only the time they are sent. + + +##### buffer on failures + +If the server fails to receive the data after that many failures, data loss on the connector instance is expected (Netdata will also log it). + + +##### send hosts matching + +Includes one or more space separated patterns, using * as wildcard (any number of times within each pattern). +The patterns are checked against the hostname (the localhost is always checked as localhost), allowing us to +filter which hosts will be sent to the external database when this Netdata is a central Netdata aggregating multiple hosts. + +A pattern starting with `!` gives a negative match. So to match all hosts named `*db*` except hosts containing `*child*`, +use `!*child* *db*` (so, the order is important: the first pattern matching the hostname will be used - positive or negative). + + +##### send charts matching + +A pattern starting with ! gives a negative match. So to match all charts named apps.* except charts ending in *reads, +use !*reads apps.* (so, the order is important: the first pattern matching the chart id or the chart name will be used, +positive or negative). There is also a URL parameter filter that can be used while querying allmetrics. The URL parameter +has a higher priority than the configuration option. + + +##### send names instead of ids + +Netdata supports names and IDs for charts and dimensions. Usually IDs are unique identifiers as read by the system and names +are human friendly labels (also unique). Most charts and metrics have the same ID and name, but in several cases they are +different : disks with device-mapper, interrupts, QoS classes, statsd synthetic charts, etc. + + +
+ +#### Examples + +##### Example configuration + +Basic example configuration for Prometheus remote write. + +```yaml +[prometheus_remote_write:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + +``` +##### Example configuration with HTTPS and HTTP authentication + +Add `:https` modifier to the connector type if you need to use the TLS/SSL protocol. For example: `remote_write:https:my_instance`. + +```yaml +[prometheus_remote_write:https:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + username = my_username + password = my_password + +``` + diff --git a/exporting/prometheus/integrations/victoriametrics.md b/exporting/prometheus/integrations/victoriametrics.md new file mode 100644 index 00000000..114aefc8 --- /dev/null +++ b/exporting/prometheus/integrations/victoriametrics.md @@ -0,0 +1,158 @@ + + +# VictoriaMetrics + + + + + +Use the Prometheus remote write exporting connector to archive your Netdata metrics to the external storage provider of your choice for long-term storage and further analysis. + + + + +## Limitations + +The remote write exporting connector does not support buffer on failures. + + +## Setup + +### Prerequisites + +#### + +- Netdata and the external storage provider of your choice, installed, configured and operational. +- `protobuf` and `snappy` libraries installed. +- Netdata reinstalled after the libraries. + + + +### Configuration + +#### File + +The configuration file name for this integration is `exporting.conf`. + + +You can edit the configuration file using the `edit-config` script from the +Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#the-netdata-config-directory). + +```bash +cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata +sudo ./edit-config exporting.conf +``` +#### Options + +The following options can be defined for this exporter. + +
Config options + +| Name | Description | Default | Required | +|:----|:-----------|:-------|:--------:| +| enabled | Enables or disables an exporting connector instance (yes/no). | no | yes | +| destination | Accepts a space separated list of hostnames, IPs (IPv4 and IPv6) and ports to connect to. Netdata will use the first available to send the metrics. | no | yes | +| username | Username for HTTP authentication | my_username | no | +| password | Password for HTTP authentication | my_password | no | +| data source | Selects the kind of data that will be sent to the external database. (as collected/average/sum) | | no | +| hostname | The hostname to be used for sending data to the external database server. | [global].hostname | no | +| prefix | The prefix to add to all metrics. | netdata | no | +| update every | Frequency of sending sending data to the external database, in seconds. | 10 | no | +| buffer on failures | The number of iterations (`update every` seconds) to buffer data, when the external database server is not available. | 10 | no | +| timeout ms | The timeout in milliseconds to wait for the external database server to process the data. | 20000 | no | +| send hosts matching | Hosts filter. Determines which hosts will be sent to the external database. The syntax is [simple patterns](https://github.com/netdata/netdata/tree/master/libnetdata/simple_pattern#simple-patterns). | localhost * | no | +| send charts matching | One or more space separated patterns (use * as wildcard) checked against both chart id and chart name. | * | no | +| send names instead of ids | Controls the metric names Netdata should send to the external database (yes/no). | | no | +| send configured labels | Controls if host labels defined in the `[host labels]` section in `netdata.conf` should be sent to the external database (yes/no). | | no | +| send automatic labels | Controls if automatically created labels, like `_os_name` or `_architecture` should be sent to the external database (yes/no). | | no | + +##### destination + +The format of each item in this list, is: [PROTOCOL:]IP[:PORT]. +- PROTOCOL can be udp or tcp. tcp is the default and only supported by the current exporting engine. +- IP can be XX.XX.XX.XX (IPv4), or [XX:XX...XX:XX] (IPv6). For IPv6 you can to enclose the IP in [] to separate it from the port. +- PORT can be a number of a service name. If omitted, the default port for the exporting connector will be used. + +Example IPv4: + ```yaml + destination = 10.11.14.2:2003 10.11.14.3:4242 10.11.14.4:2003 + ``` +Example IPv6 and IPv4 together: +```yaml +destination = [ffff:...:0001]:2003 10.11.12.1:2003 +``` +When multiple servers are defined, Netdata will try the next one when the previous one fails. + + +##### update every + +Netdata will add some randomness to this number, to prevent stressing the external server when many Netdata servers +send data to the same database. This randomness does not affect the quality of the data, only the time they are sent. + + +##### buffer on failures + +If the server fails to receive the data after that many failures, data loss on the connector instance is expected (Netdata will also log it). + + +##### send hosts matching + +Includes one or more space separated patterns, using * as wildcard (any number of times within each pattern). +The patterns are checked against the hostname (the localhost is always checked as localhost), allowing us to +filter which hosts will be sent to the external database when this Netdata is a central Netdata aggregating multiple hosts. + +A pattern starting with `!` gives a negative match. So to match all hosts named `*db*` except hosts containing `*child*`, +use `!*child* *db*` (so, the order is important: the first pattern matching the hostname will be used - positive or negative). + + +##### send charts matching + +A pattern starting with ! gives a negative match. So to match all charts named apps.* except charts ending in *reads, +use !*reads apps.* (so, the order is important: the first pattern matching the chart id or the chart name will be used, +positive or negative). There is also a URL parameter filter that can be used while querying allmetrics. The URL parameter +has a higher priority than the configuration option. + + +##### send names instead of ids + +Netdata supports names and IDs for charts and dimensions. Usually IDs are unique identifiers as read by the system and names +are human friendly labels (also unique). Most charts and metrics have the same ID and name, but in several cases they are +different : disks with device-mapper, interrupts, QoS classes, statsd synthetic charts, etc. + + +
+ +#### Examples + +##### Example configuration + +Basic example configuration for Prometheus remote write. + +```yaml +[prometheus_remote_write:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + +``` +##### Example configuration with HTTPS and HTTP authentication + +Add `:https` modifier to the connector type if you need to use the TLS/SSL protocol. For example: `remote_write:https:my_instance`. + +```yaml +[prometheus_remote_write:https:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + username = my_username + password = my_password + +``` + diff --git a/exporting/prometheus/integrations/vmware_aria.md b/exporting/prometheus/integrations/vmware_aria.md new file mode 100644 index 00000000..493d3550 --- /dev/null +++ b/exporting/prometheus/integrations/vmware_aria.md @@ -0,0 +1,158 @@ + + +# VMware Aria + + + + + +Use the Prometheus remote write exporting connector to archive your Netdata metrics to the external storage provider of your choice for long-term storage and further analysis. + + + + +## Limitations + +The remote write exporting connector does not support buffer on failures. + + +## Setup + +### Prerequisites + +#### + +- Netdata and the external storage provider of your choice, installed, configured and operational. +- `protobuf` and `snappy` libraries installed. +- Netdata reinstalled after the libraries. + + + +### Configuration + +#### File + +The configuration file name for this integration is `exporting.conf`. + + +You can edit the configuration file using the `edit-config` script from the +Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#the-netdata-config-directory). + +```bash +cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata +sudo ./edit-config exporting.conf +``` +#### Options + +The following options can be defined for this exporter. + +
Config options + +| Name | Description | Default | Required | +|:----|:-----------|:-------|:--------:| +| enabled | Enables or disables an exporting connector instance (yes/no). | no | yes | +| destination | Accepts a space separated list of hostnames, IPs (IPv4 and IPv6) and ports to connect to. Netdata will use the first available to send the metrics. | no | yes | +| username | Username for HTTP authentication | my_username | no | +| password | Password for HTTP authentication | my_password | no | +| data source | Selects the kind of data that will be sent to the external database. (as collected/average/sum) | | no | +| hostname | The hostname to be used for sending data to the external database server. | [global].hostname | no | +| prefix | The prefix to add to all metrics. | netdata | no | +| update every | Frequency of sending sending data to the external database, in seconds. | 10 | no | +| buffer on failures | The number of iterations (`update every` seconds) to buffer data, when the external database server is not available. | 10 | no | +| timeout ms | The timeout in milliseconds to wait for the external database server to process the data. | 20000 | no | +| send hosts matching | Hosts filter. Determines which hosts will be sent to the external database. The syntax is [simple patterns](https://github.com/netdata/netdata/tree/master/libnetdata/simple_pattern#simple-patterns). | localhost * | no | +| send charts matching | One or more space separated patterns (use * as wildcard) checked against both chart id and chart name. | * | no | +| send names instead of ids | Controls the metric names Netdata should send to the external database (yes/no). | | no | +| send configured labels | Controls if host labels defined in the `[host labels]` section in `netdata.conf` should be sent to the external database (yes/no). | | no | +| send automatic labels | Controls if automatically created labels, like `_os_name` or `_architecture` should be sent to the external database (yes/no). | | no | + +##### destination + +The format of each item in this list, is: [PROTOCOL:]IP[:PORT]. +- PROTOCOL can be udp or tcp. tcp is the default and only supported by the current exporting engine. +- IP can be XX.XX.XX.XX (IPv4), or [XX:XX...XX:XX] (IPv6). For IPv6 you can to enclose the IP in [] to separate it from the port. +- PORT can be a number of a service name. If omitted, the default port for the exporting connector will be used. + +Example IPv4: + ```yaml + destination = 10.11.14.2:2003 10.11.14.3:4242 10.11.14.4:2003 + ``` +Example IPv6 and IPv4 together: +```yaml +destination = [ffff:...:0001]:2003 10.11.12.1:2003 +``` +When multiple servers are defined, Netdata will try the next one when the previous one fails. + + +##### update every + +Netdata will add some randomness to this number, to prevent stressing the external server when many Netdata servers +send data to the same database. This randomness does not affect the quality of the data, only the time they are sent. + + +##### buffer on failures + +If the server fails to receive the data after that many failures, data loss on the connector instance is expected (Netdata will also log it). + + +##### send hosts matching + +Includes one or more space separated patterns, using * as wildcard (any number of times within each pattern). +The patterns are checked against the hostname (the localhost is always checked as localhost), allowing us to +filter which hosts will be sent to the external database when this Netdata is a central Netdata aggregating multiple hosts. + +A pattern starting with `!` gives a negative match. So to match all hosts named `*db*` except hosts containing `*child*`, +use `!*child* *db*` (so, the order is important: the first pattern matching the hostname will be used - positive or negative). + + +##### send charts matching + +A pattern starting with ! gives a negative match. So to match all charts named apps.* except charts ending in *reads, +use !*reads apps.* (so, the order is important: the first pattern matching the chart id or the chart name will be used, +positive or negative). There is also a URL parameter filter that can be used while querying allmetrics. The URL parameter +has a higher priority than the configuration option. + + +##### send names instead of ids + +Netdata supports names and IDs for charts and dimensions. Usually IDs are unique identifiers as read by the system and names +are human friendly labels (also unique). Most charts and metrics have the same ID and name, but in several cases they are +different : disks with device-mapper, interrupts, QoS classes, statsd synthetic charts, etc. + + +
+ +#### Examples + +##### Example configuration + +Basic example configuration for Prometheus remote write. + +```yaml +[prometheus_remote_write:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + +``` +##### Example configuration with HTTPS and HTTP authentication + +Add `:https` modifier to the connector type if you need to use the TLS/SSL protocol. For example: `remote_write:https:my_instance`. + +```yaml +[prometheus_remote_write:https:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + username = my_username + password = my_password + +``` + diff --git a/exporting/prometheus/integrations/wavefront.md b/exporting/prometheus/integrations/wavefront.md new file mode 100644 index 00000000..a6bab056 --- /dev/null +++ b/exporting/prometheus/integrations/wavefront.md @@ -0,0 +1,158 @@ + + +# Wavefront + + + + + +Use the Prometheus remote write exporting connector to archive your Netdata metrics to the external storage provider of your choice for long-term storage and further analysis. + + + + +## Limitations + +The remote write exporting connector does not support buffer on failures. + + +## Setup + +### Prerequisites + +#### + +- Netdata and the external storage provider of your choice, installed, configured and operational. +- `protobuf` and `snappy` libraries installed. +- Netdata reinstalled after the libraries. + + + +### Configuration + +#### File + +The configuration file name for this integration is `exporting.conf`. + + +You can edit the configuration file using the `edit-config` script from the +Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#the-netdata-config-directory). + +```bash +cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata +sudo ./edit-config exporting.conf +``` +#### Options + +The following options can be defined for this exporter. + +
Config options + +| Name | Description | Default | Required | +|:----|:-----------|:-------|:--------:| +| enabled | Enables or disables an exporting connector instance (yes/no). | no | yes | +| destination | Accepts a space separated list of hostnames, IPs (IPv4 and IPv6) and ports to connect to. Netdata will use the first available to send the metrics. | no | yes | +| username | Username for HTTP authentication | my_username | no | +| password | Password for HTTP authentication | my_password | no | +| data source | Selects the kind of data that will be sent to the external database. (as collected/average/sum) | | no | +| hostname | The hostname to be used for sending data to the external database server. | [global].hostname | no | +| prefix | The prefix to add to all metrics. | netdata | no | +| update every | Frequency of sending sending data to the external database, in seconds. | 10 | no | +| buffer on failures | The number of iterations (`update every` seconds) to buffer data, when the external database server is not available. | 10 | no | +| timeout ms | The timeout in milliseconds to wait for the external database server to process the data. | 20000 | no | +| send hosts matching | Hosts filter. Determines which hosts will be sent to the external database. The syntax is [simple patterns](https://github.com/netdata/netdata/tree/master/libnetdata/simple_pattern#simple-patterns). | localhost * | no | +| send charts matching | One or more space separated patterns (use * as wildcard) checked against both chart id and chart name. | * | no | +| send names instead of ids | Controls the metric names Netdata should send to the external database (yes/no). | | no | +| send configured labels | Controls if host labels defined in the `[host labels]` section in `netdata.conf` should be sent to the external database (yes/no). | | no | +| send automatic labels | Controls if automatically created labels, like `_os_name` or `_architecture` should be sent to the external database (yes/no). | | no | + +##### destination + +The format of each item in this list, is: [PROTOCOL:]IP[:PORT]. +- PROTOCOL can be udp or tcp. tcp is the default and only supported by the current exporting engine. +- IP can be XX.XX.XX.XX (IPv4), or [XX:XX...XX:XX] (IPv6). For IPv6 you can to enclose the IP in [] to separate it from the port. +- PORT can be a number of a service name. If omitted, the default port for the exporting connector will be used. + +Example IPv4: + ```yaml + destination = 10.11.14.2:2003 10.11.14.3:4242 10.11.14.4:2003 + ``` +Example IPv6 and IPv4 together: +```yaml +destination = [ffff:...:0001]:2003 10.11.12.1:2003 +``` +When multiple servers are defined, Netdata will try the next one when the previous one fails. + + +##### update every + +Netdata will add some randomness to this number, to prevent stressing the external server when many Netdata servers +send data to the same database. This randomness does not affect the quality of the data, only the time they are sent. + + +##### buffer on failures + +If the server fails to receive the data after that many failures, data loss on the connector instance is expected (Netdata will also log it). + + +##### send hosts matching + +Includes one or more space separated patterns, using * as wildcard (any number of times within each pattern). +The patterns are checked against the hostname (the localhost is always checked as localhost), allowing us to +filter which hosts will be sent to the external database when this Netdata is a central Netdata aggregating multiple hosts. + +A pattern starting with `!` gives a negative match. So to match all hosts named `*db*` except hosts containing `*child*`, +use `!*child* *db*` (so, the order is important: the first pattern matching the hostname will be used - positive or negative). + + +##### send charts matching + +A pattern starting with ! gives a negative match. So to match all charts named apps.* except charts ending in *reads, +use !*reads apps.* (so, the order is important: the first pattern matching the chart id or the chart name will be used, +positive or negative). There is also a URL parameter filter that can be used while querying allmetrics. The URL parameter +has a higher priority than the configuration option. + + +##### send names instead of ids + +Netdata supports names and IDs for charts and dimensions. Usually IDs are unique identifiers as read by the system and names +are human friendly labels (also unique). Most charts and metrics have the same ID and name, but in several cases they are +different : disks with device-mapper, interrupts, QoS classes, statsd synthetic charts, etc. + + +
+ +#### Examples + +##### Example configuration + +Basic example configuration for Prometheus remote write. + +```yaml +[prometheus_remote_write:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + +``` +##### Example configuration with HTTPS and HTTP authentication + +Add `:https` modifier to the connector type if you need to use the TLS/SSL protocol. For example: `remote_write:https:my_instance`. + +```yaml +[prometheus_remote_write:https:my_instance] + enabled = yes + destination = 10.11.14.2:2003 + remote write URL path = /receive + username = my_username + password = my_password + +``` + -- cgit v1.2.3