From be1c7e50e1e8809ea56f2c9d472eccd8ffd73a97 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Fri, 19 Apr 2024 04:57:58 +0200 Subject: Adding upstream version 1.44.3. Signed-off-by: Daniel Baumann --- health/guides/btrfs/btrfs_device_read_errors.md | 50 +++++++++++++++++++++++++ 1 file changed, 50 insertions(+) create mode 100644 health/guides/btrfs/btrfs_device_read_errors.md (limited to 'health/guides/btrfs/btrfs_device_read_errors.md') diff --git a/health/guides/btrfs/btrfs_device_read_errors.md b/health/guides/btrfs/btrfs_device_read_errors.md new file mode 100644 index 00000000..684cd0be --- /dev/null +++ b/health/guides/btrfs/btrfs_device_read_errors.md @@ -0,0 +1,50 @@ +### Understand the alert + +This alert monitors the number of BTRFS read errors on a device. If you receive this alert, it means that your system has encountered at least one BTRFS read error in the last 10 minutes. + +### What are BTRFS read errors? + +BTRFS (B-Tree File System) is a modern file system designed for Linux. BTRFS read errors are instances where the file system fails to read data from a device. This can occur due to various reasons like hardware failure, file system corruption, or disk problems. + +### Troubleshoot the alert + +1. Check system logs for BTRFS errors + + Review the output from the following command to identify any BTRFS errors: + ``` + sudo journalctl -k | grep -i BTRFS + ``` + +2. Identify the affected BTRFS device and partition + + List all BTRFS devices with their respective information by running the following command: + ``` + sudo btrfs filesystem show + ``` + +3. Perform a BTRFS filesystem check + + To check the integrity of the BTRFS file system, run the following command, replacing `` with the affected device path: + ``` + sudo btrfs check --readonly + ``` + Note: Be careful when using the `--repair` option, as it may cause data loss. It is recommended to take a backup before attempting a repair. + +4. Verify the disk health + + Check the disk health using SMART tools to determine if there are any hardware issues. This can be done by first installing `smartmontools` if not already installed: + ``` + sudo apt install smartmontools + ``` + Then running a disk health check on the affected device: + ``` + sudo smartctl -a + ``` + +5. Analyze the read error patterns + + If the read errors are happening consistently or increasing, consider replacing the affected device with a new one or adding redundancy to the system by using RAID or BTRFS built-in features. + +### Useful resources + +1. [smartmontools documentation](https://www.smartmontools.org/) -- cgit v1.2.3