From be1c7e50e1e8809ea56f2c9d472eccd8ffd73a97 Mon Sep 17 00:00:00 2001
From: Daniel Baumann <daniel.baumann@progress-linux.org>
Date: Fri, 19 Apr 2024 04:57:58 +0200
Subject: Adding upstream version 1.44.3.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
---
 health/health.d/apcupsd.conf | 125 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 125 insertions(+)
 create mode 100644 health/health.d/apcupsd.conf

(limited to 'health/health.d/apcupsd.conf')

diff --git a/health/health.d/apcupsd.conf b/health/health.d/apcupsd.conf
new file mode 100644
index 00000000..90a72af1
--- /dev/null
+++ b/health/health.d/apcupsd.conf
@@ -0,0 +1,125 @@
+# you can disable an alarm notification by setting the 'to' line to: silent
+
+ template: apcupsd_10min_ups_load
+       on: apcupsd.load
+    class: Utilization
+     type: Power Supply
+component: UPS
+       os: *
+    hosts: *
+   lookup: average -10m unaligned of percentage
+    units: %
+    every: 1m
+     warn: $this > (($status >= $WARNING)  ? (70) : (80))
+    delay: down 10m multiplier 1.5 max 1h
+  summary: APC UPS load
+     info: APC UPS average load over the last 10 minutes
+       to: sitemgr
+
+# Discussion in https://github.com/netdata/netdata/pull/3928:
+# Fire the alarm as soon as it's going on battery (99% charge) and clear only when full.
+ template: apcupsd_ups_charge
+       on: apcupsd.charge
+    class: Errors
+     type: Power Supply
+component: UPS
+       os: *
+    hosts: *
+   lookup: average -60s unaligned of charge
+    units: %
+    every: 60s
+     warn: $this < 100
+     crit: $this < 40
+    delay: down 10m multiplier 1.5 max 1h
+  summary: APC UPS battery charge
+     info: APC UPS average battery charge over the last minute
+       to: sitemgr
+
+ template: apcupsd_last_collected_secs
+       on: apcupsd.load
+    class: Latency
+     type: Power Supply
+component: UPS device
+     calc: $now - $last_collected_t
+    every: 10s
+    units: seconds ago
+     warn: $this > (($status >= $WARNING)  ? ($update_every) : ( 5 * $update_every))
+    delay: down 5m multiplier 1.5 max 1h
+  summary: APC UPS last collection
+     info: APC UPS number of seconds since the last successful data collection
+       to: sitemgr
+
+#Send out a warning when SELFTEST code is BT or NG. Code descriptions can be found at:
+#http://www.apcupsd.org/manual/#:~:text=or%20N/A.-,SELFTEST,-The%20results%20of
+ template: apcupsd_selftest_warning
+       on: apcupsd.selftest
+   lookup: max -1s unaligned match-names of BT,NG
+    units: status
+    every: 10s
+     warn: $this == 1
+    delay: up 0 down 15m multiplier 1.5 max 1h
+     info: APC UPS self-test failed due to insufficient battery capacity or due to overload.
+       to: sitemgr
+
+#Send out a warning when STATUS code is ONBATT,OVERLOAD,LOWBATT,REPLACEBATT,NOBATT,COMMLOST
+#https://man.archlinux.org/man/apcaccess.8.en#:~:text=apcupsd%20was%20started-,STATUS,-%3A%20UPS%20status.%20One
+
+ template: apcupsd_status_onbatt
+       on: apcupsd.status
+   lookup: max -1s unaligned match-names of ONBATT
+    units: status
+    every: 10s
+     warn: $this == 1
+    delay: up 1m down 15m multiplier 1.5 max 1h
+     info: APC UPS has switched to battery power because the input power has failed
+       to: sitemgr
+
+ template: apcupsd_status_overload
+       on: apcupsd.status
+   lookup: max -1s unaligned match-names of OVERLOAD
+    units: status
+    every: 10s
+     warn: $this == 1
+    delay: up 0 down 15m multiplier 1.5 max 1h
+     info: APC UPS is overloaded and cannot supply enough power to the load
+       to: sitemgr
+
+ template: apcupsd_status_lowbatt
+       on: apcupsd.status
+   lookup: max -1s unaligned match-names of LOWBATT
+    units: status
+    every: 10s
+     warn: $this == 1
+    delay: up 0 down 15m multiplier 1.5 max 1h
+     info: APC UPS battery is low and needs to be recharged
+       to: sitemgr
+
+ template: apcupsd_status_replacebatt
+       on: apcupsd.status
+   lookup: max -1s unaligned match-names of REPLACEBATT
+    units: status
+    every: 10s
+     warn: $this == 1
+    delay: up 0 down 15m multiplier 1.5 max 1h
+     info: APC UPS battery has reached the end of its lifespan and needs to be replaced
+       to: sitemgr
+
+ template: apcupsd_status_nobatt
+       on: apcupsd.status
+   lookup: max -1s unaligned match-names of NOBATT
+    units: status
+    every: 10s
+     warn: $this == 1
+    delay: up 0 down 15m multiplier 1.5 max 1h
+     info: APC UPS has no battery
+       to: sitemgr
+
+ template: apcupsd_status_commlost
+       on: apcupsd.status
+   lookup: max -1s unaligned match-names of COMMLOST
+    units: status
+    every: 10s
+     warn: $this == 1
+    delay: up 0 down 15m multiplier 1.5 max 1h
+     info: APC UPS communication link is lost
+       to: sitemgr
-- 
cgit v1.2.3