plugin_name: python.d.plugin
modules:
  - meta:
      plugin_name: python.d.plugin
      module_name: hpssa
      monitored_instance:
        name: HP Smart Storage Arrays
        link: 'https://buy.hpe.com/us/en/software/server-management-software/server-management-software/smart-array-management-software/hpe-smart-storage-administrator/p/5409020'
        categories:
          - data-collection.storage-mount-points-and-filesystems
        icon_filename: 'hp.svg'
      related_resources:
        integrations:
          list: []
      info_provided_to_referring_integrations:
        description: ''
      keywords:
        - storage
        - hp
        - hpssa
        - array
      most_popular: false
    overview:
      data_collection:
        metrics_description: 'This collector monitors HP Smart Storage Arrays metrics about operational statuses and temperatures.'
        method_description: 'It uses the command line tool `ssacli`. The exact command used is `sudo -n ssacli ctrl all show config detail`'
      supported_platforms:
        include: []
        exclude: []
      multi_instance: false
      additional_permissions:
        description: ''
      default_behavior:
        auto_detection:
          description: 'If no configuration is provided, the collector will try to execute the `ssacli` binary.'
        limits:
          description: ''
        performance_impact:
          description: ''
    setup:
      prerequisites:
        list:
          - title: 'Enable the hpssa collector'
            description: |
              The `hpssa` collector is disabled by default. To enable it, use `edit-config` from the Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md), which is typically at `/etc/netdata`, to edit the `python.d.conf` file.

              ```bash
              cd /etc/netdata   # Replace this path with your Netdata config directory, if different
              sudo ./edit-config python.d.conf
              ```

              Change the value of the `hpssa` setting to `yes`. Save the file and restart the Netdata Agent with `sudo systemctl restart netdata`, or the [appropriate method](https://github.com/netdata/netdata/blob/master/docs/configure/start-stop-restart.md) for your system.
          - title: 'Allow user netdata to execute `ssacli` as root.'
            description: |
              This module uses `ssacli`, which can only be executed by root. It uses `sudo` and assumes that it is configured such that the `netdata` user can execute `ssacli` as root without a password.
              
              - Add to your `/etc/sudoers` file:
              
              `which ssacli` shows the full path to the binary.
              
              ```bash
              netdata ALL=(root)       NOPASSWD: /path/to/ssacli
              ```
              
              - Reset Netdata's systemd
                unit [CapabilityBoundingSet](https://www.freedesktop.org/software/systemd/man/systemd.exec.html#Capabilities) (Linux
                distributions with systemd)
              
              The default CapabilityBoundingSet doesn't allow using `sudo`, and is quite strict in general. Resetting is not optimal, but a next-best solution given the inability to execute `ssacli` using `sudo`.
              
              As the `root` user, do the following:
              
              ```cmd
              mkdir /etc/systemd/system/netdata.service.d
              echo -e '[Service]\nCapabilityBoundingSet=~' | tee /etc/systemd/system/netdata.service.d/unset-capability-bounding-set.conf
              systemctl daemon-reload
              systemctl restart netdata.service
              ```
      configuration:
        file:
          name: python.d/hpssa.conf
        options:
          description: |
            There are 2 sections:
            
            * Global variables
            * One or more JOBS that can define multiple different instances to monitor.
            
            The following options can be defined globally: priority, penalty, autodetection_retry, update_every, but can also be defined per JOB to override the global values.
            
            Additionally, the following collapsed table contains all the options that can be configured inside a JOB definition.
            
            Every configuration JOB starts with a `job_name` value which will appear in the dashboard, unless a `name` parameter is specified.
          folding:
            title: "Config options"
            enabled: true
          list:
            - name: update_every
              description: Sets the default data collection frequency.
              default_value: 5
              required: false
            - name: priority
              description: Controls the order of charts at the netdata dashboard.
              default_value: 60000
              required: false
            - name: autodetection_retry
              description: Sets the job re-check interval in seconds.
              default_value: 0
              required: false
            - name: penalty
              description: Indicates whether to apply penalty to update_every in case of failures.
              default_value: yes
              required: false
            - name: name
              description: Job name. This value will overwrite the `job_name` value. JOBS with the same name are mutually exclusive. Only one of them will be allowed running at any time. This allows autodetection to try several alternatives and pick the one that works.
              default_value: ''
              required: false
            - name: ssacli_path
              description: Path to the `ssacli` command line utility. Configure this if `ssacli` is not in the $PATH
              default_value: ''
              required: false
            - name: use_sudo
              description: Whether or not to use `sudo` to execute `ssacli`
              default_value: 'True'
              required: false
        examples:
          folding:
            enabled: false
            title: "Config"
          list:
            - name: Local simple config
              description: A basic configuration, specyfing the path to `ssacli`
              folding:
                enabled: false
              config: |
                local:
                 ssacli_path: /usr/sbin/ssacli
    troubleshooting:
      problems:
        list: []
    alerts: []
    metrics:
      folding:
        title: Metrics
        enabled: false
      description: ""
      availability: []
      scopes:
        - name: global
          description: "These metrics refer to the entire monitored application."
          labels: []
          metrics:
            - name: hpssa.ctrl_status
              description: Status 1 is OK, Status 0 is not OK
              unit: "Status"
              chart_type: line
              dimensions:
                - name: ctrl_{adapter slot}_status
                - name: cache_{adapter slot}_status
                - name: battery_{adapter slot}_status per adapter
            - name: hpssa.ctrl_temperature
              description: Temperature
              unit: "Celsius"
              chart_type: line
              dimensions:
                - name: ctrl_{adapter slot}_temperature
                - name: cache_{adapter slot}_temperature per adapter
            - name: hpssa.ld_status
              description: Status 1 is OK, Status 0 is not OK
              unit: "Status"
              chart_type: line
              dimensions:
                - name: a dimension per logical drive
            - name: hpssa.pd_status
              description: Status 1 is OK, Status 0 is not OK
              unit: "Status"
              chart_type: line
              dimensions:
                - name: a dimension per physical drive
            - name: hpssa.pd_temperature
              description: Temperature
              unit: "Celsius"
              chart_type: line
              dimensions:
                - name: a dimension per physical drive