diff options
Diffstat (limited to 'ltmain.sh')
| -rw-r--r-- | ltmain.sh | 8406 |
1 files changed, 8406 insertions, 0 deletions
diff --git a/ltmain.sh b/ltmain.sh new file mode 100644 index 0000000..b36c4ad --- /dev/null +++ b/ltmain.sh @@ -0,0 +1,8406 @@ +# Generated from ltmain.m4sh. + +# ltmain.sh (GNU libtool) 2.2.6 +# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# GNU Libtool is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, +# or obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + +# Usage: $progname [OPTION]... [MODE-ARG]... +# +# Provide generalized library-building support services. +# +# --config show all configuration variables +# --debug enable verbose shell tracing +# -n, --dry-run display commands without modifying any files +# --features display basic configuration information and exit +# --mode=MODE use operation mode MODE +# --preserve-dup-deps don't remove duplicate dependency libraries +# --quiet, --silent don't print informational messages +# --tag=TAG use configuration variables from tag TAG +# -v, --verbose print informational messages (default) +# --version print version information +# -h, --help print short or long help message +# +# MODE must be one of the following: +# +# clean remove files from the build directory +# compile compile a source file into a libtool object +# execute automatically set library path, then run a program +# finish complete the installation of libtool libraries +# install install libraries or executables +# link create a library or an executable +# uninstall remove libraries from an installed directory +# +# MODE-ARGS vary depending on the MODE. +# Try `$progname --help --mode=MODE' for a more detailed description of MODE. +# +# When reporting a bug, please describe a test case to reproduce it and +# include the following information: +# +# host-triplet: $host +# shell: $SHELL +# compiler: $LTCC +# compiler flags: $LTCFLAGS +# linker: $LD (gnu? $with_gnu_ld) +# $progname: (GNU libtool) 2.2.6 +# automake: $automake_version +# autoconf: $autoconf_version +# +# Report bugs to <bug-libtool@gnu.org>. + +PROGRAM=ltmain.sh +PACKAGE=libtool +VERSION=2.2.6 +TIMESTAMP="" +package_revision=1.3012 + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +# NLS nuisances: We save the old values to restore during execute mode. +# Only set LANG and LC_ALL to C if already set. +# These must not be set unconditionally because not all systems understand +# e.g. LANG=C (notably SCO). +lt_user_locale= +lt_safe_locale= +for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES +do + eval "if test \"\${$lt_var+set}\" = set; then + save_$lt_var=\$$lt_var + $lt_var=C + export $lt_var + lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" + lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" + fi" +done + +$lt_unset CDPATH + + + + + +: ${CP="cp -f"} +: ${ECHO="echo"} +: ${EGREP="/usr/bin/grep -E"} +: ${FGREP="/usr/bin/grep -F"} +: ${GREP="/usr/bin/grep"} +: ${LN_S="ln -s"} +: ${MAKE="make"} +: ${MKDIR="mkdir"} +: ${MV="mv -f"} +: ${RM="rm -f"} +: ${SED="/opt/local/bin/gsed"} +: ${SHELL="${CONFIG_SHELL-/bin/sh}"} +: ${Xsed="$SED -e 1s/^X//"} + +# Global variables: +EXIT_SUCCESS=0 +EXIT_FAILURE=1 +EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. +EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. + +exit_status=$EXIT_SUCCESS + +# Make sure IFS has a sensible default +lt_nl=' +' +IFS=" $lt_nl" + +dirname="s,/[^/]*$,," +basename="s,^.*/,," + +# func_dirname_and_basename file append nondir_replacement +# perform func_basename and func_dirname in a single function +# call: +# dirname: Compute the dirname of FILE. If nonempty, +# add APPEND to the result, otherwise set result +# to NONDIR_REPLACEMENT. +# value returned in "$func_dirname_result" +# basename: Compute filename of FILE. +# value retuned in "$func_basename_result" +# Implementation must be kept synchronized with func_dirname +# and func_basename. For efficiency, we do not delegate to +# those functions but instead duplicate the functionality here. +func_dirname_and_basename () +{ + # Extract subdirectory from the argument. + func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi + func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` +} + +# Generated shell functions inserted here. + +# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh +# is ksh but when the shell is invoked as "sh" and the current value of +# the _XPG environment variable is not equal to 1 (one), the special +# positional parameter $0, within a function call, is the name of the +# function. +progpath="$0" + +# The name of this program: +# In the unlikely event $progname began with a '-', it would play havoc with +# func_echo (imagine progname=-n), so we prepend ./ in that case: +func_dirname_and_basename "$progpath" +progname=$func_basename_result +case $progname in + -*) progname=./$progname ;; +esac + +# Make sure we have an absolute path for reexecution: +case $progpath in + [\\/]*|[A-Za-z]:\\*) ;; + *[\\/]*) + progdir=$func_dirname_result + progdir=`cd "$progdir" && pwd` + progpath="$progdir/$progname" + ;; + *) + save_IFS="$IFS" + IFS=: + for progdir in $PATH; do + IFS="$save_IFS" + test -x "$progdir/$progname" && break + done + IFS="$save_IFS" + test -n "$progdir" || progdir=`pwd` + progpath="$progdir/$progname" + ;; +esac + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed="${SED}"' -e 1s/^X//' +sed_quote_subst='s/\([`"$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Re-`\' parameter expansions in output of double_quote_subst that were +# `\'-ed in input to the same. If an odd number of `\' preceded a '$' +# in input to double_quote_subst, that '$' was protected from expansion. +# Since each input `\' is now two `\'s, look for any number of runs of +# four `\'s followed by two `\'s and then a '$'. `\' that '$'. +bs='\\' +bs2='\\\\' +bs4='\\\\\\\\' +dollar='\$' +sed_double_backslash="\ + s/$bs4/&\\ +/g + s/^$bs2$dollar/$bs&/ + s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g + s/\n//g" + +# Standard options: +opt_dry_run=false +opt_help=false +opt_quiet=false +opt_verbose=false +opt_warning=: + +# func_echo arg... +# Echo program name prefixed message, along with the current mode +# name if it has been set yet. +func_echo () +{ + $ECHO "$progname${mode+: }$mode: $*" +} + +# func_verbose arg... +# Echo program name prefixed message in verbose mode only. +func_verbose () +{ + $opt_verbose && func_echo ${1+"$@"} + + # A bug in bash halts the script if the last line of a function + # fails when set -e is in force, so we need another command to + # work around that: + : +} + +# func_error arg... +# Echo program name prefixed message to standard error. +func_error () +{ + $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2 +} + +# func_warning arg... +# Echo program name prefixed warning message to standard error. +func_warning () +{ + $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2 + + # bash bug again: + : +} + +# func_fatal_error arg... +# Echo program name prefixed message to standard error, and exit. +func_fatal_error () +{ + func_error ${1+"$@"} + exit $EXIT_FAILURE +} + +# func_fatal_help arg... +# Echo program name prefixed message to standard error, followed by +# a help hint, and exit. +func_fatal_help () +{ + func_error ${1+"$@"} + func_fatal_error "$help" +} +help="Try \`$progname --help' for more information." ## default + + +# func_grep expression filename +# Check whether EXPRESSION matches any line of FILENAME, without output. +func_grep () +{ + $GREP "$1" "$2" >/dev/null 2>&1 +} + + +# func_mkdir_p directory-path +# Make sure the entire path to DIRECTORY-PATH is available. +func_mkdir_p () +{ + my_directory_path="$1" + my_dir_list= + + if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then + + # Protect directory names starting with `-' + case $my_directory_path in + -*) my_directory_path="./$my_directory_path" ;; + esac + + # While some portion of DIR does not yet exist... + while test ! -d "$my_directory_path"; do + # ...make a list in topmost first order. Use a colon delimited + # list incase some portion of path contains whitespace. + my_dir_list="$my_directory_path:$my_dir_list" + + # If the last portion added has no slash in it, the list is done + case $my_directory_path in */*) ;; *) break ;; esac + + # ...otherwise throw away the child directory and loop + my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"` + done + my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'` + + save_mkdir_p_IFS="$IFS"; IFS=':' + for my_dir in $my_dir_list; do + IFS="$save_mkdir_p_IFS" + # mkdir can fail with a `File exist' error if two processes + # try to create one of the directories concurrently. Don't + # stop in that case! + $MKDIR "$my_dir" 2>/dev/null || : + done + IFS="$save_mkdir_p_IFS" + + # Bail out if we (or some other process) failed to create a directory. + test -d "$my_directory_path" || \ + func_fatal_error "Failed to create \`$1'" + fi +} + + +# func_mktempdir [string] +# Make a temporary directory that won't clash with other running +# libtool processes, and avoids race conditions if possible. If +# given, STRING is the basename for that directory. +func_mktempdir () +{ + my_template="${TMPDIR-/tmp}/${1-$progname}" + + if test "$opt_dry_run" = ":"; then + # Return a directory name, but don't create it in dry-run mode + my_tmpdir="${my_template}-$$" + else + + # If mktemp works, use that first and foremost + my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` + + if test ! -d "$my_tmpdir"; then + # Failing that, at least try and use $RANDOM to avoid a race + my_tmpdir="${my_template}-${RANDOM-0}$$" + + save_mktempdir_umask=`umask` + umask 0077 + $MKDIR "$my_tmpdir" + umask $save_mktempdir_umask + fi + + # If we're not in dry-run mode, bomb out on failure + test -d "$my_tmpdir" || \ + func_fatal_error "cannot create temporary directory \`$my_tmpdir'" + fi + + $ECHO "X$my_tmpdir" | $Xsed +} + + +# func_quote_for_eval arg +# Aesthetically quote ARG to be evaled later. +# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT +# is double-quoted, suitable for a subsequent eval, whereas +# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters +# which are still active within double quotes backslashified. +func_quote_for_eval () +{ + case $1 in + *[\\\`\"\$]*) + func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;; + *) + func_quote_for_eval_unquoted_result="$1" ;; + esac + + case $func_quote_for_eval_unquoted_result in + # Double-quote args containing shell metacharacters to delay + # word splitting, command substitution and and variable + # expansion for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" + ;; + *) + func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" + esac +} + + +# func_quote_for_expand arg +# Aesthetically quote ARG to be evaled later; same as above, +# but do not quote variable references. +func_quote_for_expand () +{ + case $1 in + *[\\\`\"]*) + my_arg=`$ECHO "X$1" | $Xsed \ + -e "$double_quote_subst" -e "$sed_double_backslash"` ;; + *) + my_arg="$1" ;; + esac + + case $my_arg in + # Double-quote args containing shell metacharacters to delay + # word splitting and command substitution for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + my_arg="\"$my_arg\"" + ;; + esac + + func_quote_for_expand_result="$my_arg" +} + + +# func_show_eval cmd [fail_exp] +# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. +func_show_eval () +{ + my_cmd="$1" + my_fail_exp="${2-:}" + + ${opt_silent-false} || { + func_quote_for_expand "$my_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + if ${opt_dry_run-false}; then :; else + eval "$my_cmd" + my_status=$? + if test "$my_status" -eq 0; then :; else + eval "(exit $my_status); $my_fail_exp" + fi + fi +} + + +# func_show_eval_locale cmd [fail_exp] +# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. Use the saved locale for evaluation. +func_show_eval_locale () +{ + my_cmd="$1" + my_fail_exp="${2-:}" + + ${opt_silent-false} || { + func_quote_for_expand "$my_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + if ${opt_dry_run-false}; then :; else + eval "$lt_user_locale + $my_cmd" + my_status=$? + eval "$lt_safe_locale" + if test "$my_status" -eq 0; then :; else + eval "(exit $my_status); $my_fail_exp" + fi + fi +} + + + + + +# func_version +# Echo version message to standard output and exit. +func_version () +{ + $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / { + s/^# // + s/^# *$// + s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ + p + }' < "$progpath" + exit $? +} + +# func_usage +# Echo short help message to standard output and exit. +func_usage () +{ + $SED -n '/^# Usage:/,/# -h/ { + s/^# // + s/^# *$// + s/\$progname/'$progname'/ + p + }' < "$progpath" + $ECHO + $ECHO "run \`$progname --help | more' for full usage" + exit $? +} + +# func_help +# Echo long help message to standard output and exit. +func_help () +{ + $SED -n '/^# Usage:/,/# Report bugs to/ { + s/^# // + s/^# *$// + s*\$progname*'$progname'* + s*\$host*'"$host"'* + s*\$SHELL*'"$SHELL"'* + s*\$LTCC*'"$LTCC"'* + s*\$LTCFLAGS*'"$LTCFLAGS"'* + s*\$LD*'"$LD"'* + s/\$with_gnu_ld/'"$with_gnu_ld"'/ + s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/ + s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/ + p + }' < "$progpath" + exit $? +} + +# func_missing_arg argname +# Echo program name prefixed message to standard error and set global +# exit_cmd. +func_missing_arg () +{ + func_error "missing argument for $1" + exit_cmd=exit +} + +exit_cmd=: + + + + + +# Check that we have a working $ECHO. +if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then + # Yippee, $ECHO works! + : +else + # Restart under the correct shell, and then maybe $ECHO will work. + exec $SHELL "$progpath" --no-reexec ${1+"$@"} +fi + +if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift + cat <<EOF +$* +EOF + exit $EXIT_SUCCESS +fi + +magic="%%%MAGIC variable%%%" +magic_exe="%%%MAGIC EXE variable%%%" + +# Global variables. +# $mode is unset +nonopt= +execute_dlfiles= +preserve_args= +lo2o="s/\\.lo\$/.${objext}/" +o2lo="s/\\.${objext}\$/.lo/" +extracted_archives= +extracted_serial=0 + +opt_dry_run=false +opt_duplicate_deps=false +opt_silent=false +opt_debug=: + +# If this variable is set in any of the actions, the command in it +# will be execed at the end. This prevents here-documents from being +# left over by shells. +exec_cmd= + +# func_fatal_configuration arg... +# Echo program name prefixed message to standard error, followed by +# a configuration failure hint, and exit. +func_fatal_configuration () +{ + func_error ${1+"$@"} + func_error "See the $PACKAGE documentation for more information." + func_fatal_error "Fatal configuration error." +} + + +# func_config +# Display the configuration for all the tags in this script. +func_config () +{ + re_begincf='^# ### BEGIN LIBTOOL' + re_endcf='^# ### END LIBTOOL' + + # Default configuration. + $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" + + # Now print the configurations for the tags. + for tagname in $taglist; do + $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" + done + + exit $? +} + +# func_features +# Display the features supported by this script. +func_features () +{ + $ECHO "host: $host" + if test "$build_libtool_libs" = yes; then + $ECHO "enable shared libraries" + else + $ECHO "disable shared libraries" + fi + if test "$build_old_libs" = yes; then + $ECHO "enable static libraries" + else + $ECHO "disable static libraries" + fi + + exit $? +} + +# func_enable_tag tagname +# Verify that TAGNAME is valid, and either flag an error and exit, or +# enable the TAGNAME tag. We also add TAGNAME to the global $taglist +# variable here. +func_enable_tag () +{ + # Global variable: + tagname="$1" + + re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" + re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" + sed_extractcf="/$re_begincf/,/$re_endcf/p" + + # Validate tagname. + case $tagname in + *[!-_A-Za-z0-9,/]*) + func_fatal_error "invalid tag name: $tagname" + ;; + esac + + # Don't test for the "default" C tag, as we know it's + # there but not specially marked. + case $tagname in + CC) ;; + *) + if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then + taglist="$taglist $tagname" + + # Evaluate the configuration. Be careful to quote the path + # and the sed script, to avoid splitting on whitespace, but + # also don't use non-portable quotes within backquotes within + # quotes we have to do it in 2 steps: + extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` + eval "$extractedcf" + else + func_error "ignoring unknown tag $tagname" + fi + ;; + esac +} + +# Parse options once, thoroughly. This comes as soon as possible in +# the script to make things like `libtool --version' happen quickly. +{ + + # Shorthand for --mode=foo, only valid as the first argument + case $1 in + clean|clea|cle|cl) + shift; set dummy --mode clean ${1+"$@"}; shift + ;; + compile|compil|compi|comp|com|co|c) + shift; set dummy --mode compile ${1+"$@"}; shift + ;; + execute|execut|execu|exec|exe|ex|e) + shift; set dummy --mode execute ${1+"$@"}; shift + ;; + finish|finis|fini|fin|fi|f) + shift; set dummy --mode finish ${1+"$@"}; shift + ;; + install|instal|insta|inst|ins|in|i) + shift; set dummy --mode install ${1+"$@"}; shift + ;; + link|lin|li|l) + shift; set dummy --mode link ${1+"$@"}; shift + ;; + uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) + shift; set dummy --mode uninstall ${1+"$@"}; shift + ;; + esac + + # Parse non-mode specific arguments: + while test "$#" -gt 0; do + opt="$1" + shift + + case $opt in + --config) func_config ;; + + --debug) preserve_args="$preserve_args $opt" + func_echo "enabling shell trace mode" + opt_debug='set -x' + $opt_debug + ;; + + -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break + execute_dlfiles="$execute_dlfiles $1" + shift + ;; + + --dry-run | -n) opt_dry_run=: ;; + --features) func_features ;; + --finish) mode="finish" ;; + + --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break + case $1 in + # Valid mode arguments: + clean) ;; + compile) ;; + execute) ;; + finish) ;; + install) ;; + link) ;; + relink) ;; + uninstall) ;; + + # Catch anything else as an error + *) func_error "invalid argument for $opt" + exit_cmd=exit + break + ;; + esac + + mode="$1" + shift + ;; + + --preserve-dup-deps) + opt_duplicate_deps=: ;; + + --quiet|--silent) preserve_args="$preserve_args $opt" + opt_silent=: + ;; + + --verbose| -v) preserve_args="$preserve_args $opt" + opt_silent=false + ;; + + --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break + preserve_args="$preserve_args $opt $1" + func_enable_tag "$1" # tagname is set here + shift + ;; + + # Separate optargs to long options: + -dlopen=*|--mode=*|--tag=*) + func_opt_split "$opt" + set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"} + shift + ;; + + -\?|-h) func_usage ;; + --help) opt_help=: ;; + --version) func_version ;; + + -*) func_fatal_help "unrecognized option \`$opt'" ;; + + *) nonopt="$opt" + break + ;; + esac + done + + + case $host in + *cygwin* | *mingw* | *pw32* | *cegcc*) + # don't eliminate duplications in $postdeps and $predeps + opt_duplicate_compiler_generated_deps=: + ;; + *) + opt_duplicate_compiler_generated_deps=$opt_duplicate_deps + ;; + esac + + # Having warned about all mis-specified options, bail out if + # anything was wrong. + $exit_cmd $EXIT_FAILURE +} + +# func_check_version_match +# Ensure that we are using m4 macros, and libtool script from the same +# release of libtool. +func_check_version_match () +{ + if test "$package_revision" != "$macro_revision"; then + if test "$VERSION" != "$macro_version"; then + if test -z "$macro_version"; then + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from an older release. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + fi + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, +$progname: but the definition of this LT_INIT comes from revision $macro_revision. +$progname: You should recreate aclocal.m4 with macros from revision $package_revision +$progname: of $PACKAGE $VERSION and run autoconf again. +_LT_EOF + fi + + exit $EXIT_MISMATCH + fi +} + + +## ----------- ## +## Main. ## +## ----------- ## + +$opt_help || { + # Sanity checks first: + func_check_version_match + + if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then + func_fatal_configuration "not configured to build any kind of library" + fi + + test -z "$mode" && func_fatal_error "error: you must specify a MODE." + + + # Darwin sucks + eval std_shrext=\"$shrext_cmds\" + + + # Only execute mode is allowed to have -dlopen flags. + if test -n "$execute_dlfiles" && test "$mode" != execute; then + func_error "unrecognized option \`-dlopen'" + $ECHO "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Change the help message to a mode-specific one. + generic_help="$help" + help="Try \`$progname --help --mode=$mode' for more information." +} + + +# func_lalib_p file +# True iff FILE is a libtool `.la' library or `.lo' object file. +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_lalib_p () +{ + test -f "$1" && + $SED -e 4q "$1" 2>/dev/null \ + | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 +} + +# func_lalib_unsafe_p file +# True iff FILE is a libtool `.la' library or `.lo' object file. +# This function implements the same check as func_lalib_p without +# resorting to external programs. To this end, it redirects stdin and +# closes it afterwards, without saving the original file descriptor. +# As a safety measure, use it only where a negative result would be +# fatal anyway. Works if `file' does not exist. +func_lalib_unsafe_p () +{ + lalib_p=no + if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then + for lalib_p_l in 1 2 3 4 + do + read lalib_p_line + case "$lalib_p_line" in + \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; + esac + done + exec 0<&5 5<&- + fi + test "$lalib_p" = yes +} + +# func_ltwrapper_script_p file +# True iff FILE is a libtool wrapper script +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_script_p () +{ + func_lalib_p "$1" +} + +# func_ltwrapper_executable_p file +# True iff FILE is a libtool wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_executable_p () +{ + func_ltwrapper_exec_suffix= + case $1 in + *.exe) ;; + *) func_ltwrapper_exec_suffix=.exe ;; + esac + $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 +} + +# func_ltwrapper_scriptname file +# Assumes file is an ltwrapper_executable +# uses $file to determine the appropriate filename for a +# temporary ltwrapper_script. +func_ltwrapper_scriptname () +{ + func_ltwrapper_scriptname_result="" + if func_ltwrapper_executable_p "$1"; then + func_dirname_and_basename "$1" "" "." + func_stripname '' '.exe' "$func_basename_result" + func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" + fi +} + +# func_ltwrapper_p file +# True iff FILE is a libtool wrapper script or wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_p () +{ + func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" +} + + +# func_execute_cmds commands fail_cmd +# Execute tilde-delimited COMMANDS. +# If FAIL_CMD is given, eval that upon failure. +# FAIL_CMD may read-access the current command in variable CMD! +func_execute_cmds () +{ + $opt_debug + save_ifs=$IFS; IFS='~' + for cmd in $1; do + IFS=$save_ifs + eval cmd=\"$cmd\" + func_show_eval "$cmd" "${2-:}" + done + IFS=$save_ifs +} + + +# func_source file +# Source FILE, adding directory component if necessary. +# Note that it is not necessary on cygwin/mingw to append a dot to +# FILE even if both FILE and FILE.exe exist: automatic-append-.exe +# behavior happens only for exec(3), not for open(2)! Also, sourcing +# `FILE.' does not work on cygwin managed mounts. +func_source () +{ + $opt_debug + case $1 in + */* | *\\*) . "$1" ;; + *) . "./$1" ;; + esac +} + + +# func_infer_tag arg +# Infer tagged configuration to use if any are available and +# if one wasn't chosen via the "--tag" command line option. +# Only attempt this if the compiler in the base compile +# command doesn't match the default compiler. +# arg is usually of the form 'gcc ...' +func_infer_tag () +{ + $opt_debug + if test -n "$available_tags" && test -z "$tagname"; then + CC_quoted= + for arg in $CC; do + func_quote_for_eval "$arg" + CC_quoted="$CC_quoted $func_quote_for_eval_result" + done + case $@ in + # Blanks in the command may have been stripped by the calling shell, + # but not from the CC environment variable when configure was run. + " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;; + # Blanks at the start of $base_compile will cause this to fail + # if we don't check for them as well. + *) + for z in $available_tags; do + if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" + CC_quoted= + for arg in $CC; do + # Double-quote args containing other shell metacharacters. + func_quote_for_eval "$arg" + CC_quoted="$CC_quoted $func_quote_for_eval_result" + done + case "$@ " in + " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) + # The compiler in the base compile command matches + # the one in the tagged configuration. + # Assume this is the tagged configuration we want. + tagname=$z + break + ;; + esac + fi + done + # If $tagname still isn't set, then no tagged configuration + # was found and let the user know that the "--tag" command + # line option must be used. + if test -z "$tagname"; then + func_echo "unable to infer tagged configuration" + func_fatal_error "specify a tag with \`--tag'" +# else +# func_verbose "using $tagname tagged configuration" + fi + ;; + esac + fi +} + + + +# func_write_libtool_object output_name pic_name nonpic_name +# Create a libtool object file (analogous to a ".la" file), +# but don't create it if we're doing a dry run. +func_write_libtool_object () +{ + write_libobj=${1} + if test "$build_libtool_libs" = yes; then + write_lobj=\'${2}\' + else + write_lobj=none + fi + + if test "$build_old_libs" = yes; then + write_oldobj=\'${3}\' + else + write_oldobj=none + fi + + $opt_dry_run || { + cat >${write_libobj}T <<EOF +# $write_libobj - a libtool object file +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# +# Please DO NOT delete this file! +# It is necessary for linking the library. + +# Name of the PIC object. +pic_object=$write_lobj + +# Name of the non-PIC object +non_pic_object=$write_oldobj + +EOF + $MV "${write_libobj}T" "${write_libobj}" + } +} + +# func_mode_compile arg... +func_mode_compile () +{ + $opt_debug + # Get the compilation command and the source file. + base_compile= + srcfile="$nonopt" # always keep a non-empty value in "srcfile" + suppress_opt=yes + suppress_output= + arg_mode=normal + libobj= + later= + pie_flag= + + for arg + do + case $arg_mode in + arg ) + # do not "continue". Instead, add this to base_compile + lastarg="$arg" + arg_mode=normal + ;; + + target ) + libobj="$arg" + arg_mode=normal + continue + ;; + + normal ) + # Accept any command-line options. + case $arg in + -o) + test -n "$libobj" && \ + func_fatal_error "you cannot specify \`-o' more than once" + arg_mode=target + continue + ;; + + -pie | -fpie | -fPIE) + pie_flag="$pie_flag $arg" + continue + ;; + + -shared | -static | -prefer-pic | -prefer-non-pic) + later="$later $arg" + continue + ;; + + -no-suppress) + suppress_opt=no + continue + ;; + + -Xcompiler) + arg_mode=arg # the next one goes into the "base_compile" arg list + continue # The current "srcfile" will either be retained or + ;; # replaced later. I would guess that would be a bug. + + -Wc,*) + func_stripname '-Wc,' '' "$arg" + args=$func_stripname_result + lastarg= + save_ifs="$IFS"; IFS=',' + for arg in $args; do + IFS="$save_ifs" + func_quote_for_eval "$arg" + lastarg="$lastarg $func_quote_for_eval_result" + done + IFS="$save_ifs" + func_stripname ' ' '' "$lastarg" + lastarg=$func_stripname_result + + # Add the arguments to base_compile. + base_compile="$base_compile $lastarg" + continue + ;; + + *) + # Accept the current argument as the source file. + # The previous "srcfile" becomes the current argument. + # + lastarg="$srcfile" + srcfile="$arg" + ;; + esac # case $arg + ;; + esac # case $arg_mode + + # Aesthetically quote the previous argument. + func_quote_for_eval "$lastarg" + base_compile="$base_compile $func_quote_for_eval_result" + done # for arg + + case $arg_mode in + arg) + func_fatal_error "you must specify an argument for -Xcompile" + ;; + target) + func_fatal_error "you must specify a target with \`-o'" + ;; + *) + # Get the name of the library object. + test -z "$libobj" && { + func_basename "$srcfile" + libobj="$func_basename_result" + } + ;; + esac + + # Recognize several different file suffixes. + # If the user specifies -o file.o, it is replaced with file.lo + case $libobj in + *.[cCFSifmso] | \ + *.ada | *.adb | *.ads | *.asm | \ + *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ + *.[fF][09]? | *.for | *.java | *.obj | *.sx) + func_xform "$libobj" + libobj=$func_xform_result + ;; + esac + + case $libobj in + *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; + *) + func_fatal_error "cannot determine name of library object from \`$libobj'" + ;; + esac + + func_infer_tag $base_compile + + for arg in $later; do + case $arg in + -shared) + test "$build_libtool_libs" != yes && \ + func_fatal_configuration "can not build a shared library" + build_old_libs=no + continue + ;; + + -static) + build_libtool_libs=no + build_old_libs=yes + continue + ;; + + -prefer-pic) + pic_mode=yes + continue + ;; + + -prefer-non-pic) + pic_mode=no + continue + ;; + esac + done + + func_quote_for_eval "$libobj" + test "X$libobj" != "X$func_quote_for_eval_result" \ + && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ + && func_warning "libobj name \`$libobj' may not contain shell special characters." + func_dirname_and_basename "$obj" "/" "" + objname="$func_basename_result" + xdir="$func_dirname_result" + lobj=${xdir}$objdir/$objname + + test -z "$base_compile" && \ + func_fatal_help "you must specify a compilation command" + + # Delete any leftover library objects. + if test "$build_old_libs" = yes; then + removelist="$obj $lobj $libobj ${libobj}T" + else + removelist="$lobj $libobj ${libobj}T" + fi + + # On Cygwin there's no "real" PIC flag so we must build both object types + case $host_os in + cygwin* | mingw* | pw32* | os2* | cegcc*) + pic_mode=default + ;; + esac + if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then + # non-PIC code in shared libraries is not supported + pic_mode=default + fi + + # Calculate the filename of the output object if compiler does + # not support -o with -c + if test "$compiler_c_o" = no; then + output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} + lockfile="$output_obj.lock" + else + output_obj= + need_locks=no + lockfile= + fi + + # Lock this critical section if it is needed + # We use this script file to make the link, it avoids creating a new file + if test "$need_locks" = yes; then + until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do + func_echo "Waiting for $lockfile to be removed" + sleep 2 + done + elif test "$need_locks" = warn; then + if test -f "$lockfile"; then + $ECHO "\ +*** ERROR, $lockfile exists and contains: +`cat $lockfile 2>/dev/null` + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + removelist="$removelist $output_obj" + $ECHO "$srcfile" > "$lockfile" + fi + + $opt_dry_run || $RM $removelist + removelist="$removelist $lockfile" + trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 + + if test -n "$fix_srcfile_path"; then + eval srcfile=\"$fix_srcfile_path\" + fi + func_quote_for_eval "$srcfile" + qsrcfile=$func_quote_for_eval_result + + # Only build a PIC object if we are building libtool libraries. + if test "$build_libtool_libs" = yes; then + # Without this assignment, base_compile gets emptied. + fbsd_hideous_sh_bug=$base_compile + + if test "$pic_mode" != no; then + command="$base_compile $qsrcfile $pic_flag" + else + # Don't build PIC code + command="$base_compile $qsrcfile" + fi + + func_mkdir_p "$xdir$objdir" + + if test -z "$output_obj"; then + # Place PIC objects in $objdir + command="$command -o $lobj" + fi + + func_show_eval_locale "$command" \ + 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' + + if test "$need_locks" = warn && + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $ECHO "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed, then go on to compile the next one + if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then + func_show_eval '$MV "$output_obj" "$lobj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + fi + + # Allow error messages only from the first compilation. + if test "$suppress_opt" = yes; then + suppress_output=' >/dev/null 2>&1' + fi + fi + + # Only build a position-dependent object if we build old libraries. + if test "$build_old_libs" = yes; then + if test "$pic_mode" != yes; then + # Don't build PIC code + command="$base_compile $qsrcfile$pie_flag" + else + command="$base_compile $qsrcfile $pic_flag" + fi + if test "$compiler_c_o" = yes; then + command="$command -o $obj" + fi + + # Suppress compiler output if we already did a PIC compilation. + command="$command$suppress_output" + func_show_eval_locale "$command" \ + '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' + + if test "$need_locks" = warn && + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $ECHO "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed + if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then + func_show_eval '$MV "$output_obj" "$obj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + fi + fi + + $opt_dry_run || { + func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" + + # Unlock the critical section if it was locked + if test "$need_locks" != no; then + removelist=$lockfile + $RM "$lockfile" + fi + } + + exit $EXIT_SUCCESS +} + +$opt_help || { +test "$mode" = compile && func_mode_compile ${1+"$@"} +} + +func_mode_help () +{ + # We need to display help for each of the modes. + case $mode in + "") + # Generic help is extracted from the usage comments + # at the start of this file. + func_help + ;; + + clean) + $ECHO \ +"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... + +Remove files from the build directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, object or program, all the files associated +with it are deleted. Otherwise, only FILE itself is deleted using RM." + ;; + + compile) + $ECHO \ +"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE + +Compile a source file into a libtool library object. + +This mode accepts the following additional options: + + -o OUTPUT-FILE set the output file name to OUTPUT-FILE + -no-suppress do not suppress compiler output for multiple passes + -prefer-pic try to building PIC objects only + -prefer-non-pic try to building non-PIC objects only + -shared do not build a \`.o' file suitable for static linking + -static only build a \`.o' file suitable for static linking + +COMPILE-COMMAND is a command to be used in creating a \`standard' object file +from the given SOURCEFILE. + +The output file name is determined by removing the directory component from +SOURCEFILE, then substituting the C source code suffix \`.c' with the +library object suffix, \`.lo'." + ;; + + execute) + $ECHO \ +"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... + +Automatically set library path, then run a program. + +This mode accepts the following additional options: + + -dlopen FILE add the directory containing FILE to the library path + +This mode sets the library path environment variable according to \`-dlopen' +flags. + +If any of the ARGS are libtool executable wrappers, then they are translated +into their corresponding uninstalled binary, and any of their required library +directories are added to the library path. + +Then, COMMAND is executed, with ARGS as arguments." + ;; + + finish) + $ECHO \ +"Usage: $progname [OPTION]... --mode=finish [LIBDIR]... + +Complete the installation of libtool libraries. + +Each LIBDIR is a directory that contains libtool libraries. + +The commands that this mode executes may require superuser privileges. Use +the \`--dry-run' option if you just want to see what would be executed." + ;; + + install) + $ECHO \ +"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... + +Install executables or libraries. + +INSTALL-COMMAND is the installation command. The first component should be +either the \`install' or \`cp' program. + +The following components of INSTALL-COMMAND are treated specially: + + -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation + +The rest of the components are interpreted as arguments to that command (only +BSD-compatible install options are recognized)." + ;; + + link) + $ECHO \ +"Usage: $progname [OPTION]... --mode=link LINK-COMMAND... + +Link object files or libraries together to form another library, or to +create an executable program. + +LINK-COMMAND is a command using the C compiler that you would use to create +a program from several object files. + +The following components of LINK-COMMAND are treated specially: + + -all-static do not do any dynamic linking at all + -avoid-version do not add a version suffix if possible + -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime + -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols + -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) + -export-symbols SYMFILE + try to export only the symbols listed in SYMFILE + -export-symbols-regex REGEX + try to export only the symbols matching REGEX + -LLIBDIR search LIBDIR for required installed libraries + -lNAME OUTPUT-FILE requires the installed library libNAME + -module build a library that can dlopened + -no-fast-install disable the fast-install mode + -no-install link a not-installable executable + -no-undefined declare that a library does not refer to external symbols + -o OUTPUT-FILE create OUTPUT-FILE from the specified objects + -objectlist FILE Use a list of object files found in FILE to specify objects + -precious-files-regex REGEX + don't remove output files matching REGEX + -release RELEASE specify package release information + -rpath LIBDIR the created library will eventually be installed in LIBDIR + -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries + -shared only do dynamic linking of libtool libraries + -shrext SUFFIX override the standard shared library file extension + -static do not do any dynamic linking of uninstalled libtool libraries + -static-libtool-libs + do not do any dynamic linking of libtool libraries + -version-info CURRENT[:REVISION[:AGE]] + specify library version info [each variable defaults to 0] + -weak LIBNAME declare that the target provides the LIBNAME interface + +All other options (arguments beginning with \`-') are ignored. + +Every other argument is treated as a filename. Files ending in \`.la' are +treated as uninstalled libtool libraries, other files are standard or library +object files. + +If the OUTPUT-FILE ends in \`.la', then a libtool library is created, +only library objects (\`.lo' files) may be specified, and \`-rpath' is +required, except when creating a convenience library. + +If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created +using \`ar' and \`ranlib', or on Windows using \`lib'. + +If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file +is created, otherwise an executable program is created." + ;; + + uninstall) + $ECHO \ +"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... + +Remove libraries from an installation directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, all the files associated with it are deleted. +Otherwise, only FILE itself is deleted using RM." + ;; + + *) + func_fatal_help "invalid operation mode \`$mode'" + ;; + esac + + $ECHO + $ECHO "Try \`$progname --help' for more information about other modes." + + exit $? +} + + # Now that we've collected a possible --mode arg, show help if necessary + $opt_help && func_mode_help + + +# func_mode_execute arg... +func_mode_execute () +{ + $opt_debug + # The first argument is the command name. + cmd="$nonopt" + test -z "$cmd" && \ + func_fatal_help "you must specify a COMMAND" + + # Handle -dlopen flags immediately. + for file in $execute_dlfiles; do + test -f "$file" \ + || func_fatal_help "\`$file' is not a file" + + dir= + case $file in + *.la) + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "\`$lib' is not a valid libtool archive" + + # Read the libtool library. + dlname= + library_names= + func_source "$file" + + # Skip this library if it cannot be dlopened. + if test -z "$dlname"; then + # Warn if it was a shared library. + test -n "$library_names" && \ + func_warning "\`$file' was not linked with \`-export-dynamic'" + continue + fi + + func_dirname "$file" "" "." + dir="$func_dirname_result" + + if test -f "$dir/$objdir/$dlname"; then + dir="$dir/$objdir" + else + if test ! -f "$dir/$dlname"; then + func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" + fi + fi + ;; + + *.lo) + # Just add the directory containing the .lo file. + func_dirname "$file" "" "." + dir="$func_dirname_result" + ;; + + *) + func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" + continue + ;; + esac + + # Get the absolute pathname. + absdir=`cd "$dir" && pwd` + test -n "$absdir" && dir="$absdir" + + # Now add the directory to shlibpath_var. + if eval "test -z \"\$$shlibpath_var\""; then + eval "$shlibpath_var=\"\$dir\"" + else + eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" + fi + done + + # This variable tells wrapper scripts just to set shlibpath_var + # rather than running their programs. + libtool_execute_magic="$magic" + + # Check if any of the arguments is a wrapper script. + args= + for file + do + case $file in + -*) ;; + *) + # Do a test to see if this is really a libtool program. + if func_ltwrapper_script_p "$file"; then + func_source "$file" + # Transform arg to wrapped name. + file="$progdir/$program" + elif func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + func_source "$func_ltwrapper_scriptname_result" + # Transform arg to wrapped name. + file="$progdir/$program" + fi + ;; + esac + # Quote arguments (to preserve shell metacharacters). + func_quote_for_eval "$file" + args="$args $func_quote_for_eval_result" + done + + if test "X$opt_dry_run" = Xfalse; then + if test -n "$shlibpath_var"; then + # Export the shlibpath_var. + eval "export $shlibpath_var" + fi + + # Restore saved environment variables + for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES + do + eval "if test \"\${save_$lt_var+set}\" = set; then + $lt_var=\$save_$lt_var; export $lt_var + else + $lt_unset $lt_var + fi" + done + + # Now prepare to actually exec the command. + exec_cmd="\$cmd$args" + else + # Display what would be done. + if test -n "$shlibpath_var"; then + eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" + $ECHO "export $shlibpath_var" + fi + $ECHO "$cmd$args" + exit $EXIT_SUCCESS + fi +} + +test "$mode" = execute && func_mode_execute ${1+"$@"} + + +# func_mode_finish arg... +func_mode_finish () +{ + $opt_debug + libdirs="$nonopt" + admincmds= + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + for dir + do + libdirs="$libdirs $dir" + done + + for libdir in $libdirs; do + if test -n "$finish_cmds"; then + # Do each command in the finish commands. + func_execute_cmds "$finish_cmds" 'admincmds="$admincmds +'"$cmd"'"' + fi + if test -n "$finish_eval"; then + # Do the single finish_eval. + eval cmds=\"$finish_eval\" + $opt_dry_run || eval "$cmds" || admincmds="$admincmds + $cmds" + fi + done + fi + + # Exit here if they wanted silent mode. + $opt_silent && exit $EXIT_SUCCESS + + $ECHO "X----------------------------------------------------------------------" | $Xsed + $ECHO "Libraries have been installed in:" + for libdir in $libdirs; do + $ECHO " $libdir" + done + $ECHO + $ECHO "If you ever happen to want to link against installed libraries" + $ECHO "in a given directory, LIBDIR, you must either use libtool, and" + $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'" + $ECHO "flag during linking and do at least one of the following:" + if test -n "$shlibpath_var"; then + $ECHO " - add LIBDIR to the \`$shlibpath_var' environment variable" + $ECHO " during execution" + fi + if test -n "$runpath_var"; then + $ECHO " - add LIBDIR to the \`$runpath_var' environment variable" + $ECHO " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" + + $ECHO " - use the \`$flag' linker flag" + fi + if test -n "$admincmds"; then + $ECHO " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then + $ECHO " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + fi + $ECHO + + $ECHO "See any operating system documentation about shared libraries for" + case $host in + solaris2.[6789]|solaris2.1[0-9]) + $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual" + $ECHO "pages." + ;; + *) + $ECHO "more information, such as the ld(1) and ld.so(8) manual pages." + ;; + esac + $ECHO "X----------------------------------------------------------------------" | $Xsed + exit $EXIT_SUCCESS +} + +test "$mode" = finish && func_mode_finish ${1+"$@"} + + +# func_mode_install arg... +func_mode_install () +{ + $opt_debug + # There may be an optional sh(1) argument at the beginning of + # install_prog (especially on Windows NT). + if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || + # Allow the use of GNU shtool's install command. + $ECHO "X$nonopt" | $GREP shtool >/dev/null; then + # Aesthetically quote it. + func_quote_for_eval "$nonopt" + install_prog="$func_quote_for_eval_result " + arg=$1 + shift + else + install_prog= + arg=$nonopt + fi + + # The real first argument should be the name of the installation program. + # Aesthetically quote it. + func_quote_for_eval "$arg" + install_prog="$install_prog$func_quote_for_eval_result" + + # We need to accept at least all the BSD install flags. + dest= + files= + opts= + prev= + install_type= + isdir=no + stripme= + for arg + do + if test -n "$dest"; then + files="$files $dest" + dest=$arg + continue + fi + + case $arg in + -d) isdir=yes ;; + -f) + case " $install_prog " in + *[\\\ /]cp\ *) ;; + *) prev=$arg ;; + esac + ;; + -g | -m | -o) + prev=$arg + ;; + -s) + stripme=" -s" + continue + ;; + -*) + ;; + *) + # If the previous option needed an argument, then skip it. + if test -n "$prev"; then + prev= + else + dest=$arg + continue + fi + ;; + esac + + # Aesthetically quote the argument. + func_quote_for_eval "$arg" + install_prog="$install_prog $func_quote_for_eval_result" + done + + test -z "$install_prog" && \ + func_fatal_help "you must specify an install program" + + test -n "$prev" && \ + func_fatal_help "the \`$prev' option requires an argument" + + if test -z "$files"; then + if test -z "$dest"; then + func_fatal_help "no file or destination specified" + else + func_fatal_help "you must specify a destination" + fi + fi + + # Strip any trailing slash from the destination. + func_stripname '' '/' "$dest" + dest=$func_stripname_result + + # Check to see that the destination is a directory. + test -d "$dest" && isdir=yes + if test "$isdir" = yes; then + destdir="$dest" + destname= + else + func_dirname_and_basename "$dest" "" "." + destdir="$func_dirname_result" + destname="$func_basename_result" + + # Not a directory, so check to see that there is only one file specified. + set dummy $files; shift + test "$#" -gt 1 && \ + func_fatal_help "\`$dest' is not a directory" + fi + case $destdir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + for file in $files; do + case $file in + *.lo) ;; + *) + func_fatal_help "\`$destdir' must be an absolute directory name" + ;; + esac + done + ;; + esac + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + staticlibs= + future_libdirs= + current_libdirs= + for file in $files; do + + # Do each installation. + case $file in + *.$libext) + # Do the static libraries later. + staticlibs="$staticlibs $file" + ;; + + *.la) + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "\`$file' is not a valid libtool archive" + + library_names= + old_library= + relink_command= + func_source "$file" + + # Add the libdir to current_libdirs if it is the destination. + if test "X$destdir" = "X$libdir"; then + case "$current_libdirs " in + *" $libdir "*) ;; + *) current_libdirs="$current_libdirs $libdir" ;; + esac + else + # Note the libdir as a future libdir. + case "$future_libdirs " in + *" $libdir "*) ;; + *) future_libdirs="$future_libdirs $libdir" ;; + esac + fi + + func_dirname "$file" "/" "" + dir="$func_dirname_result" + dir="$dir$objdir" + + if test -n "$relink_command"; then + # Determine the prefix the user has applied to our future dir. + inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"` + + # Don't allow the user to place us outside of our expected + # location b/c this prevents finding dependent libraries that + # are installed to the same prefix. + # At present, this check doesn't affect windows .dll's that + # are installed into $libdir/../bin (currently, that works fine) + # but it's something to keep an eye on. + test "$inst_prefix_dir" = "$destdir" && \ + func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" + + if test -n "$inst_prefix_dir"; then + # Stick the inst_prefix_dir data into the link command. + relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` + else + relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"` + fi + + func_warning "relinking \`$file'" + func_show_eval "$relink_command" \ + 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' + fi + + # See the names of the shared library. + set dummy $library_names; shift + if test -n "$1"; then + realname="$1" + shift + + srcname="$realname" + test -n "$relink_command" && srcname="$realname"T + + # Install the shared library and build the symlinks. + func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \ + 'exit $?' + tstripme="$stripme" + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + case $realname in + *.dll.a) + tstripme="" + ;; + esac + ;; + esac + if test -n "$tstripme" && test -n "$striplib"; then + func_show_eval "$striplib $destdir/$realname" 'exit $?' + fi + + if test "$#" -gt 0; then + # Delete the old symlinks, and create new ones. + # Try `ln -sf' first, because the `ln' binary might depend on + # the symlink we replace! Solaris /bin/ln does not understand -f, + # so we also need to try rm && ln -s. + for linkname + do + test "$linkname" != "$realname" \ + && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" + done + fi + + # Do each command in the postinstall commands. + lib="$destdir/$realname" + func_execute_cmds "$postinstall_cmds" 'exit $?' + fi + + # Install the pseudo-library for information purposes. + func_basename "$file" + name="$func_basename_result" + instname="$dir/$name"i + func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' + + # Maybe install the static library, too. + test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" + ;; + + *.lo) + # Install (i.e. copy) a libtool object. + + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + func_basename "$file" + destfile="$func_basename_result" + destfile="$destdir/$destfile" + fi + + # Deduce the name of the destination old-style object file. + case $destfile in + *.lo) + func_lo2o "$destfile" + staticdest=$func_lo2o_result + ;; + *.$objext) + staticdest="$destfile" + destfile= + ;; + *) + func_fatal_help "cannot copy a libtool object to \`$destfile'" + ;; + esac + + # Install the libtool object if requested. + test -n "$destfile" && \ + func_show_eval "$install_prog $file $destfile" 'exit $?' + + # Install the old object if enabled. + if test "$build_old_libs" = yes; then + # Deduce the name of the old-style object file. + func_lo2o "$file" + staticobj=$func_lo2o_result + func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' + fi + exit $EXIT_SUCCESS + ;; + + *) + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + func_basename "$file" + destfile="$func_basename_result" + destfile="$destdir/$destfile" + fi + + # If the file is missing, and there is a .exe on the end, strip it + # because it is most likely a libtool script we actually want to + # install + stripped_ext="" + case $file in + *.exe) + if test ! -f "$file"; then + func_stripname '' '.exe' "$file" + file=$func_stripname_result + stripped_ext=".exe" + fi + ;; + esac + + # Do a test to see if this is really a libtool program. + case $host in + *cygwin* | *mingw*) + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + wrapper=$func_ltwrapper_scriptname_result + else + func_stripname '' '.exe' "$file" + wrapper=$func_stripname_result + fi + ;; + *) + wrapper=$file + ;; + esac + if func_ltwrapper_script_p "$wrapper"; then + notinst_deplibs= + relink_command= + + func_source "$wrapper" + + # Check the variables that should have been set. + test -z "$generated_by_libtool_version" && \ + func_fatal_error "invalid libtool wrapper script \`$wrapper'" + + finalize=yes + for lib in $notinst_deplibs; do + # Check to see that each library is installed. + libdir= + if test -f "$lib"; then + func_source "$lib" + fi + libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test + if test -n "$libdir" && test ! -f "$libfile"; then + func_warning "\`$lib' has not been installed in \`$libdir'" + finalize=no + fi + done + + relink_command= + func_source "$wrapper" + + outputname= + if test "$fast_install" = no && test -n "$relink_command"; then + $opt_dry_run || { + if test "$finalize" = yes; then + tmpdir=`func_mktempdir` + func_basename "$file$stripped_ext" + file="$func_basename_result" + outputname="$tmpdir/$file" + # Replace the output file specification. + relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` + + $opt_silent || { + func_quote_for_expand "$relink_command" + eval "func_echo $func_quote_for_expand_result" + } + if eval "$relink_command"; then : + else + func_error "error: relink \`$file' with the above command before installing it" + $opt_dry_run || ${RM}r "$tmpdir" + continue + fi + file="$outputname" + else + func_warning "cannot relink \`$file'" + fi + } + else + # Install the binary that we compiled earlier. + file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` + fi + fi + + # remove .exe since cygwin /usr/bin/install will append another + # one anyway + case $install_prog,$host in + */usr/bin/install*,*cygwin*) + case $file:$destfile in + *.exe:*.exe) + # this is ok + ;; + *.exe:*) + destfile=$destfile.exe + ;; + *:*.exe) + func_stripname '' '.exe' "$destfile" + destfile=$func_stripname_result + ;; + esac + ;; + esac + func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' + $opt_dry_run || if test -n "$outputname"; then + ${RM}r "$tmpdir" + fi + ;; + esac + done + + for file in $staticlibs; do + func_basename "$file" + name="$func_basename_result" + + # Set up the ranlib parameters. + oldlib="$destdir/$name" + + func_show_eval "$install_prog \$file \$oldlib" 'exit $?' + + if test -n "$stripme" && test -n "$old_striplib"; then + func_show_eval "$old_striplib $oldlib" 'exit $?' + fi + + # Do each command in the postinstall commands. + func_execute_cmds "$old_postinstall_cmds" 'exit $?' + done + + test -n "$future_libdirs" && \ + func_warning "remember to run \`$progname --finish$future_libdirs'" + + if test -n "$current_libdirs"; then + # Maybe just do a dry run. + $opt_dry_run && current_libdirs=" -n$current_libdirs" + exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' + else + exit $EXIT_SUCCESS + fi +} + +test "$mode" = install && func_mode_install ${1+"$@"} + + +# func_generate_dlsyms outputname originator pic_p +# Extract symbols from dlprefiles and create ${outputname}S.o with +# a dlpreopen symbol table. +func_generate_dlsyms () +{ + $opt_debug + my_outputname="$1" + my_originator="$2" + my_pic_p="${3-no}" + my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` + my_dlsyms= + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + if test -n "$NM" && test -n "$global_symbol_pipe"; then + my_dlsyms="${my_outputname}S.c" + else + func_error "not configured to extract global symbols from dlpreopened files" + fi + fi + + if test -n "$my_dlsyms"; then + case $my_dlsyms in + "") ;; + *.c) + # Discover the nlist of each of the dlfiles. + nlist="$output_objdir/${my_outputname}.nm" + + func_show_eval "$RM $nlist ${nlist}S ${nlist}T" + + # Parse the name list into a source file. + func_verbose "creating $output_objdir/$my_dlsyms" + + $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ +/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ +/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ + +#ifdef __cplusplus +extern \"C\" { +#endif + +/* External symbol declarations for the compiler. */\ +" + + if test "$dlself" = yes; then + func_verbose "generating symbol list for \`$output'" + + $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" + + # Add our own program objects to the symbol list. + progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + for progfile in $progfiles; do + func_verbose "extracting global C symbols from \`$progfile'" + $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'" + done + + if test -n "$exclude_expsyms"; then + $opt_dry_run || { + eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } + fi + + if test -n "$export_symbols_regex"; then + $opt_dry_run || { + eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } + fi + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + export_symbols="$output_objdir/$outputname.exp" + $opt_dry_run || { + $RM $export_symbols + eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + case $host in + *cygwin* | *mingw* | *cegcc* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' + ;; + esac + } + else + $opt_dry_run || { + eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' + eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + case $host in + *cygwin | *mingw* | *cegcc* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' + ;; + esac + } + fi + fi + + for dlprefile in $dlprefiles; do + func_verbose "extracting global C symbols from \`$dlprefile'" + func_basename "$dlprefile" + name="$func_basename_result" + $opt_dry_run || { + eval '$ECHO ": $name " >> "$nlist"' + eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'" + } + done + + $opt_dry_run || { + # Make sure we have at least an empty file. + test -f "$nlist" || : > "$nlist" + + if test -n "$exclude_expsyms"; then + $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T + $MV "$nlist"T "$nlist" + fi + + # Try sorting and uniquifying the output. + if $GREP -v "^: " < "$nlist" | + if sort -k 3 </dev/null >/dev/null 2>&1; then + sort -k 3 + else + sort +2 + fi | + uniq > "$nlist"S; then + : + else + $GREP -v "^: " < "$nlist" > "$nlist"S + fi + + if test -f "$nlist"S; then + eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' + else + $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms" + fi + + $ECHO >> "$output_objdir/$my_dlsyms" "\ + +/* The mapping between symbol names and symbols. */ +typedef struct { + const char *name; + void *address; +} lt_dlsymlist; +" + case $host in + *cygwin* | *mingw* | *cegcc* ) + $ECHO >> "$output_objdir/$my_dlsyms" "\ +/* DATA imports from DLLs on WIN32 con't be const, because + runtime relocations are performed -- see ld's documentation + on pseudo-relocs. */" + lt_dlsym_const= ;; + *osf5*) + echo >> "$output_objdir/$my_dlsyms" "\ +/* This system does not cope well with relocations in const data */" + lt_dlsym_const= ;; + *) + lt_dlsym_const=const ;; + esac + + $ECHO >> "$output_objdir/$my_dlsyms" "\ +extern $lt_dlsym_const lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[]; +$lt_dlsym_const lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[] = +{\ + { \"$my_originator\", (void *) 0 }," + + case $need_lib_prefix in + no) + eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + *) + eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + esac + $ECHO >> "$output_objdir/$my_dlsyms" "\ + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt_${my_prefix}_LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif\ +" + } # !$opt_dry_run + + pic_flag_for_symtable= + case "$compile_command " in + *" -static "*) ;; + *) + case $host in + # compiling the symbol table file with pic_flag works around + # a FreeBSD bug that causes programs to crash when -lm is + # linked before any other PIC object. But we must not use + # pic_flag when linking with -static. The problem exists in + # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. + *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) + pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; + *-*-hpux*) + pic_flag_for_symtable=" $pic_flag" ;; + *) + if test "X$my_pic_p" != Xno; then + pic_flag_for_symtable=" $pic_flag" + fi + ;; + esac + ;; + esac + symtab_cflags= + for arg in $LTCFLAGS; do + case $arg in + -pie | -fpie | -fPIE) ;; + *) symtab_cflags="$symtab_cflags $arg" ;; + esac + done + + # Now compile the dynamic symbol file. + func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' + + # Clean up the generated files. + func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' + + # Transform the symbol file into the correct name. + symfileobj="$output_objdir/${my_outputname}S.$objext" + case $host in + *cygwin* | *mingw* | *cegcc* ) + if test -f "$output_objdir/$my_outputname.def"; then + compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + else + compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` + fi + ;; + *) + compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` + ;; + esac + ;; + *) + func_fatal_error "unknown suffix for \`$my_dlsyms'" + ;; + esac + else + # We keep going just in case the user didn't refer to + # lt_preloaded_symbols. The linker will fail if global_symbol_pipe + # really was required. + + # Nullify the symbol file. + compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` + finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` + fi +} + +# func_win32_libid arg +# return the library type of file 'arg' +# +# Need a lot of goo to handle *both* DLLs and import libs +# Has to be a shell function in order to 'eat' the argument +# that is supplied when $file_magic_command is called. +func_win32_libid () +{ + $opt_debug + win32_libid_type="unknown" + win32_fileres=`file -L $1 2>/dev/null` + case $win32_fileres in + *ar\ archive\ import\ library*) # definitely import + win32_libid_type="x86 archive import" + ;; + *ar\ archive*) # could be an import, or static + if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | + $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then + win32_nmres=`eval $NM -f posix -A $1 | + $SED -n -e ' + 1,100{ + / I /{ + s,.*,import, + p + q + } + }'` + case $win32_nmres in + import*) win32_libid_type="x86 archive import";; + *) win32_libid_type="x86 archive static";; + esac + fi + ;; + *DLL*) + win32_libid_type="x86 DLL" + ;; + *executable*) # but shell scripts are "executable" too... + case $win32_fileres in + *MS\ Windows\ PE\ Intel*) + win32_libid_type="x86 DLL" + ;; + esac + ;; + esac + $ECHO "$win32_libid_type" +} + + + +# func_extract_an_archive dir oldlib +func_extract_an_archive () +{ + $opt_debug + f_ex_an_ar_dir="$1"; shift + f_ex_an_ar_oldlib="$1" + func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?' + if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then + : + else + func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" + fi +} + + +# func_extract_archives gentop oldlib ... +func_extract_archives () +{ + $opt_debug + my_gentop="$1"; shift + my_oldlibs=${1+"$@"} + my_oldobjs="" + my_xlib="" + my_xabs="" + my_xdir="" + + for my_xlib in $my_oldlibs; do + # Extract the objects. + case $my_xlib in + [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; + *) my_xabs=`pwd`"/$my_xlib" ;; + esac + func_basename "$my_xlib" + my_xlib="$func_basename_result" + my_xlib_u=$my_xlib + while :; do + case " $extracted_archives " in + *" $my_xlib_u "*) + func_arith $extracted_serial + 1 + extracted_serial=$func_arith_result + my_xlib_u=lt$extracted_serial-$my_xlib ;; + *) break ;; + esac + done + extracted_archives="$extracted_archives $my_xlib_u" + my_xdir="$my_gentop/$my_xlib_u" + + func_mkdir_p "$my_xdir" + + case $host in + *-darwin*) + func_verbose "Extracting $my_xabs" + # Do not bother doing anything if just a dry run + $opt_dry_run || { + darwin_orig_dir=`pwd` + cd $my_xdir || exit $? + darwin_archive=$my_xabs + darwin_curdir=`pwd` + darwin_base_archive=`basename "$darwin_archive"` + darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` + if test -n "$darwin_arches"; then + darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` + darwin_arch= + func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" + for darwin_arch in $darwin_arches ; do + func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" + $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" + cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" + func_extract_an_archive "`pwd`" "${darwin_base_archive}" + cd "$darwin_curdir" + $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" + done # $darwin_arches + ## Okay now we've a bunch of thin objects, gotta fatten them up :) + darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` + darwin_file= + darwin_files= + for darwin_file in $darwin_filelist; do + darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` + $LIPO -create -output "$darwin_file" $darwin_files + done # $darwin_filelist + $RM -rf unfat-$$ + cd "$darwin_orig_dir" + else + cd $darwin_orig_dir + func_extract_an_archive "$my_xdir" "$my_xabs" + fi # $darwin_arches + } # !$opt_dry_run + ;; + *) + func_extract_an_archive "$my_xdir" "$my_xabs" + ;; + esac + my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` + done + + func_extract_archives_result="$my_oldobjs" +} + + + +# func_emit_wrapper_part1 [arg=no] +# +# Emit the first part of a libtool wrapper script on stdout. +# For more information, see the description associated with +# func_emit_wrapper(), below. +func_emit_wrapper_part1 () +{ + func_emit_wrapper_part1_arg1=no + if test -n "$1" ; then + func_emit_wrapper_part1_arg1=$1 + fi + + $ECHO "\ +#! $SHELL + +# $output - temporary wrapper script for $objdir/$outputname +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# +# The $output program cannot be directly executed until all the libtool +# libraries that it depends on are installed. +# +# This wrapper script should never be moved out of the build directory. +# If it is, it will not operate correctly. + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='${SED} -e 1s/^X//' +sed_quote_subst='$sed_quote_subst' + +# Be Bourne compatible +if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +relink_command=\"$relink_command\" + +# This environment variable determines our operation mode. +if test \"\$libtool_install_magic\" = \"$magic\"; then + # install mode needs the following variables: + generated_by_libtool_version='$macro_version' + notinst_deplibs='$notinst_deplibs' +else + # When we are sourced in execute mode, \$file and \$ECHO are already set. + if test \"\$libtool_execute_magic\" != \"$magic\"; then + ECHO=\"$qecho\" + file=\"\$0\" + # Make sure echo works. + if test \"X\$1\" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift + elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then + # Yippee, \$ECHO works! + : + else + # Restart under the correct shell, and then maybe \$ECHO will work. + exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} + fi + fi\ +" + $ECHO "\ + + # Find the directory that this script lives in. + thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` + test \"x\$thisdir\" = \"x\$file\" && thisdir=. + + # Follow symbolic links until we get to the real thisdir. + file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` + while test -n \"\$file\"; do + destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` + + # If there was a directory component, then change thisdir. + if test \"x\$destdir\" != \"x\$file\"; then + case \"\$destdir\" in + [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; + *) thisdir=\"\$thisdir/\$destdir\" ;; + esac + fi + + file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\` + file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` + done +" +} +# end: func_emit_wrapper_part1 + +# func_emit_wrapper_part2 [arg=no] +# +# Emit the second part of a libtool wrapper script on stdout. +# For more information, see the description associated with +# func_emit_wrapper(), below. +func_emit_wrapper_part2 () +{ + func_emit_wrapper_part2_arg1=no + if test -n "$1" ; then + func_emit_wrapper_part2_arg1=$1 + fi + + $ECHO "\ + + # Usually 'no', except on cygwin/mingw when embedded into + # the cwrapper. + WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1 + if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then + # special case for '.' + if test \"\$thisdir\" = \".\"; then + thisdir=\`pwd\` + fi + # remove .libs from thisdir + case \"\$thisdir\" in + *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;; + $objdir ) thisdir=. ;; + esac + fi + + # Try to get the absolute directory name. + absdir=\`cd \"\$thisdir\" && pwd\` + test -n \"\$absdir\" && thisdir=\"\$absdir\" +" + + if test "$fast_install" = yes; then + $ECHO "\ + program=lt-'$outputname'$exeext + progdir=\"\$thisdir/$objdir\" + + if test ! -f \"\$progdir/\$program\" || + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ + test \"X\$file\" != \"X\$progdir/\$program\"; }; then + + file=\"\$\$-\$program\" + + if test ! -d \"\$progdir\"; then + $MKDIR \"\$progdir\" + else + $RM \"\$progdir/\$file\" + fi" + + $ECHO "\ + + # relink executable if necessary + if test -n \"\$relink_command\"; then + if relink_command_output=\`eval \$relink_command 2>&1\`; then : + else + $ECHO \"\$relink_command_output\" >&2 + $RM \"\$progdir/\$file\" + exit 1 + fi + fi + + $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || + { $RM \"\$progdir/\$program\"; + $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } + $RM \"\$progdir/\$file\" + fi" + else + $ECHO "\ + program='$outputname' + progdir=\"\$thisdir/$objdir\" +" + fi + + $ECHO "\ + + if test -f \"\$progdir/\$program\"; then" + + # Export our shlibpath_var if we have one. + if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + $ECHO "\ + # Add our own library path to $shlibpath_var + $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" + + # Some systems cannot cope with colon-terminated $shlibpath_var + # The second colon is a workaround for a bug in BeOS R4 sed + $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` + + export $shlibpath_var +" + fi + + # fixup the dll searchpath if we need to. + if test -n "$dllsearchpath"; then + $ECHO "\ + # Add the dll search path components to the executable PATH + PATH=$dllsearchpath:\$PATH +" + fi + + $ECHO "\ + if test \"\$libtool_execute_magic\" != \"$magic\"; then + # Run the actual program with our arguments. +" + case $host in + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2* | *-cegcc*) + $ECHO "\ + exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} +" + ;; + + *) + $ECHO "\ + exec \"\$progdir/\$program\" \${1+\"\$@\"} +" + ;; + esac + $ECHO "\ + \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 + exit 1 + fi + else + # The program doesn't exist. + \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 + \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 + $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 + exit 1 + fi +fi\ +" +} +# end: func_emit_wrapper_part2 + + +# func_emit_wrapper [arg=no] +# +# Emit a libtool wrapper script on stdout. +# Don't directly open a file because we may want to +# incorporate the script contents within a cygwin/mingw +# wrapper executable. Must ONLY be called from within +# func_mode_link because it depends on a number of variables +# set therein. +# +# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR +# variable will take. If 'yes', then the emitted script +# will assume that the directory in which it is stored is +# the $objdir directory. This is a cygwin/mingw-specific +# behavior. +func_emit_wrapper () +{ + func_emit_wrapper_arg1=no + if test -n "$1" ; then + func_emit_wrapper_arg1=$1 + fi + + # split this up so that func_emit_cwrapperexe_src + # can call each part independently. + func_emit_wrapper_part1 "${func_emit_wrapper_arg1}" + func_emit_wrapper_part2 "${func_emit_wrapper_arg1}" +} + + +# func_to_host_path arg +# +# Convert paths to host format when used with build tools. +# Intended for use with "native" mingw (where libtool itself +# is running under the msys shell), or in the following cross- +# build environments: +# $build $host +# mingw (msys) mingw [e.g. native] +# cygwin mingw +# *nix + wine mingw +# where wine is equipped with the `winepath' executable. +# In the native mingw case, the (msys) shell automatically +# converts paths for any non-msys applications it launches, +# but that facility isn't available from inside the cwrapper. +# Similar accommodations are necessary for $host mingw and +# $build cygwin. Calling this function does no harm for other +# $host/$build combinations not listed above. +# +# ARG is the path (on $build) that should be converted to +# the proper representation for $host. The result is stored +# in $func_to_host_path_result. +func_to_host_path () +{ + func_to_host_path_result="$1" + if test -n "$1" ; then + case $host in + *mingw* ) + lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' + case $build in + *mingw* ) # actually, msys + # awkward: cmd appends spaces to result + lt_sed_strip_trailing_spaces="s/[ ]*\$//" + func_to_host_path_tmp1=`( cmd //c echo "$1" |\ + $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""` + func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ + $SED -e "$lt_sed_naive_backslashify"` + ;; + *cygwin* ) + func_to_host_path_tmp1=`cygpath -w "$1"` + func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ + $SED -e "$lt_sed_naive_backslashify"` + ;; + * ) + # Unfortunately, winepath does not exit with a non-zero + # error code, so we are forced to check the contents of + # stdout. On the other hand, if the command is not + # found, the shell will set an exit code of 127 and print + # *an error message* to stdout. So we must check for both + # error code of zero AND non-empty stdout, which explains + # the odd construction: + func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null` + if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then + func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ + $SED -e "$lt_sed_naive_backslashify"` + else + # Allow warning below. + func_to_host_path_result="" + fi + ;; + esac + if test -z "$func_to_host_path_result" ; then + func_error "Could not determine host path corresponding to" + func_error " '$1'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback: + func_to_host_path_result="$1" + fi + ;; + esac + fi +} +# end: func_to_host_path + +# func_to_host_pathlist arg +# +# Convert pathlists to host format when used with build tools. +# See func_to_host_path(), above. This function supports the +# following $build/$host combinations (but does no harm for +# combinations not listed here): +# $build $host +# mingw (msys) mingw [e.g. native] +# cygwin mingw +# *nix + wine mingw +# +# Path separators are also converted from $build format to +# $host format. If ARG begins or ends with a path separator +# character, it is preserved (but converted to $host format) +# on output. +# +# ARG is a pathlist (on $build) that should be converted to +# the proper representation on $host. The result is stored +# in $func_to_host_pathlist_result. +func_to_host_pathlist () +{ + func_to_host_pathlist_result="$1" + if test -n "$1" ; then + case $host in + *mingw* ) + lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' + # Remove leading and trailing path separator characters from + # ARG. msys behavior is inconsistent here, cygpath turns them + # into '.;' and ';.', and winepath ignores them completely. + func_to_host_pathlist_tmp2="$1" + # Once set for this call, this variable should not be + # reassigned. It is used in tha fallback case. + func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\ + $SED -e 's|^:*||' -e 's|:*$||'` + case $build in + *mingw* ) # Actually, msys. + # Awkward: cmd appends spaces to result. + lt_sed_strip_trailing_spaces="s/[ ]*\$//" + func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\ + $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""` + func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\ + $SED -e "$lt_sed_naive_backslashify"` + ;; + *cygwin* ) + func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"` + func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\ + $SED -e "$lt_sed_naive_backslashify"` + ;; + * ) + # unfortunately, winepath doesn't convert pathlists + func_to_host_pathlist_result="" + func_to_host_pathlist_oldIFS=$IFS + IFS=: + for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do + IFS=$func_to_host_pathlist_oldIFS + if test -n "$func_to_host_pathlist_f" ; then + func_to_host_path "$func_to_host_pathlist_f" + if test -n "$func_to_host_path_result" ; then + if test -z "$func_to_host_pathlist_result" ; then + func_to_host_pathlist_result="$func_to_host_path_result" + else + func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result" + fi + fi + fi + IFS=: + done + IFS=$func_to_host_pathlist_oldIFS + ;; + esac + if test -z "$func_to_host_pathlist_result" ; then + func_error "Could not determine the host path(s) corresponding to" + func_error " '$1'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback. This may break if $1 contains DOS-style drive + # specifications. The fix is not to complicate the expression + # below, but for the user to provide a working wine installation + # with winepath so that path translation in the cross-to-mingw + # case works properly. + lt_replace_pathsep_nix_to_dos="s|:|;|g" + func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\ + $SED -e "$lt_replace_pathsep_nix_to_dos"` + fi + # Now, add the leading and trailing path separators back + case "$1" in + :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result" + ;; + esac + case "$1" in + *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;" + ;; + esac + ;; + esac + fi +} +# end: func_to_host_pathlist + +# func_emit_cwrapperexe_src +# emit the source code for a wrapper executable on stdout +# Must ONLY be called from within func_mode_link because +# it depends on a number of variable set therein. +func_emit_cwrapperexe_src () +{ + cat <<EOF + +/* $cwrappersource - temporary wrapper executable for $objdir/$outputname + Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION + + The $output program cannot be directly executed until all the libtool + libraries that it depends on are installed. + + This wrapper executable should never be moved out of the build directory. + If it is, it will not operate correctly. + + Currently, it simply execs the wrapper *script* "$SHELL $output", + but could eventually absorb all of the scripts functionality and + exec $objdir/$outputname directly. +*/ +EOF + cat <<"EOF" +#include <stdio.h> +#include <stdlib.h> +#ifdef _MSC_VER +# include <direct.h> +# include <process.h> +# include <io.h> +# define setmode _setmode +#else +# include <unistd.h> +# include <stdint.h> +# ifdef __CYGWIN__ +# include <io.h> +# define HAVE_SETENV +# ifdef __STRICT_ANSI__ +char *realpath (const char *, char *); +int putenv (char *); +int setenv (const char *, const char *, int); +# endif +# endif +#endif +#include <malloc.h> +#include <stdarg.h> +#include <assert.h> +#include <string.h> +#include <ctype.h> +#include <errno.h> +#include <fcntl.h> +#include <sys/stat.h> + +#if defined(PATH_MAX) +# define LT_PATHMAX PATH_MAX +#elif defined(MAXPATHLEN) +# define LT_PATHMAX MAXPATHLEN +#else +# define LT_PATHMAX 1024 +#endif + +#ifndef S_IXOTH +# define S_IXOTH 0 +#endif +#ifndef S_IXGRP +# define S_IXGRP 0 +#endif + +#ifdef _MSC_VER +# define S_IXUSR _S_IEXEC +# define stat _stat +# ifndef _INTPTR_T_DEFINED +# define intptr_t int +# endif +#endif + +#ifndef DIR_SEPARATOR +# define DIR_SEPARATOR '/' +# define PATH_SEPARATOR ':' +#endif + +#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ + defined (__OS2__) +# define HAVE_DOS_BASED_FILE_SYSTEM +# define FOPEN_WB "wb" +# ifndef DIR_SEPARATOR_2 +# define DIR_SEPARATOR_2 '\\' +# endif +# ifndef PATH_SEPARATOR_2 +# define PATH_SEPARATOR_2 ';' +# endif +#endif + +#ifndef DIR_SEPARATOR_2 +# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) +#else /* DIR_SEPARATOR_2 */ +# define IS_DIR_SEPARATOR(ch) \ + (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) +#endif /* DIR_SEPARATOR_2 */ + +#ifndef PATH_SEPARATOR_2 +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) +#else /* PATH_SEPARATOR_2 */ +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) +#endif /* PATH_SEPARATOR_2 */ + +#ifdef __CYGWIN__ +# define FOPEN_WB "wb" +#endif + +#ifndef FOPEN_WB +# define FOPEN_WB "w" +#endif +#ifndef _O_BINARY +# define _O_BINARY 0 +#endif + +#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) +#define XFREE(stale) do { \ + if (stale) { free ((void *) stale); stale = 0; } \ +} while (0) + +#undef LTWRAPPER_DEBUGPRINTF +#if defined DEBUGWRAPPER +# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args +static void +ltwrapper_debugprintf (const char *fmt, ...) +{ + va_list args; + va_start (args, fmt); + (void) vfprintf (stderr, fmt, args); + va_end (args); +} +#else +# define LTWRAPPER_DEBUGPRINTF(args) +#endif + +const char *program_name = NULL; + +void *xmalloc (size_t num); +char *xstrdup (const char *string); +const char *base_name (const char *name); +char *find_executable (const char *wrapper); +char *chase_symlinks (const char *pathspec); +int make_executable (const char *path); +int check_executable (const char *path); +char *strendzap (char *str, const char *pat); +void lt_fatal (const char *message, ...); +void lt_setenv (const char *name, const char *value); +char *lt_extend_str (const char *orig_value, const char *add, int to_end); +void lt_opt_process_env_set (const char *arg); +void lt_opt_process_env_prepend (const char *arg); +void lt_opt_process_env_append (const char *arg); +int lt_split_name_value (const char *arg, char** name, char** value); +void lt_update_exe_path (const char *name, const char *value); +void lt_update_lib_path (const char *name, const char *value); + +static const char *script_text_part1 = +EOF + + func_emit_wrapper_part1 yes | + $SED -e 's/\([\\"]\)/\\\1/g' \ + -e 's/^/ "/' -e 's/$/\\n"/' + echo ";" + cat <<EOF + +static const char *script_text_part2 = +EOF + func_emit_wrapper_part2 yes | + $SED -e 's/\([\\"]\)/\\\1/g' \ + -e 's/^/ "/' -e 's/$/\\n"/' + echo ";" + + cat <<EOF +const char * MAGIC_EXE = "$magic_exe"; +const char * LIB_PATH_VARNAME = "$shlibpath_var"; +EOF + + if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + func_to_host_pathlist "$temp_rpath" + cat <<EOF +const char * LIB_PATH_VALUE = "$func_to_host_pathlist_result"; +EOF + else + cat <<"EOF" +const char * LIB_PATH_VALUE = ""; +EOF + fi + + if test -n "$dllsearchpath"; then + func_to_host_pathlist "$dllsearchpath:" + cat <<EOF +const char * EXE_PATH_VARNAME = "PATH"; +const char * EXE_PATH_VALUE = "$func_to_host_pathlist_result"; +EOF + else + cat <<"EOF" +const char * EXE_PATH_VARNAME = ""; +const char * EXE_PATH_VALUE = ""; +EOF + fi + + if test "$fast_install" = yes; then + cat <<EOF +const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */ +EOF + else + cat <<EOF +const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */ +EOF + fi + + + cat <<"EOF" + +#define LTWRAPPER_OPTION_PREFIX "--lt-" +#define LTWRAPPER_OPTION_PREFIX_LENGTH 5 + +static const size_t opt_prefix_len = LTWRAPPER_OPTION_PREFIX_LENGTH; +static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX; + +static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script"; + +static const size_t env_set_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 7; +static const char *env_set_opt = LTWRAPPER_OPTION_PREFIX "env-set"; + /* argument is putenv-style "foo=bar", value of foo is set to bar */ + +static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11; +static const char *env_prepend_opt = LTWRAPPER_OPTION_PREFIX "env-prepend"; + /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */ + +static const size_t env_append_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 10; +static const char *env_append_opt = LTWRAPPER_OPTION_PREFIX "env-append"; + /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */ + +int +main (int argc, char *argv[]) +{ + char **newargz; + int newargc; + char *tmp_pathspec; + char *actual_cwrapper_path; + char *actual_cwrapper_name; + char *target_name; + char *lt_argv_zero; + intptr_t rval = 127; + + int i; + + program_name = (char *) xstrdup (base_name (argv[0])); + LTWRAPPER_DEBUGPRINTF (("(main) argv[0] : %s\n", argv[0])); + LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name)); + + /* very simple arg parsing; don't want to rely on getopt */ + for (i = 1; i < argc; i++) + { + if (strcmp (argv[i], dumpscript_opt) == 0) + { +EOF + case "$host" in + *mingw* | *cygwin* ) + # make stdout use "unix" line endings + echo " setmode(1,_O_BINARY);" + ;; + esac + + cat <<"EOF" + printf ("%s", script_text_part1); + printf ("%s", script_text_part2); + return 0; + } + } + + newargz = XMALLOC (char *, argc + 1); + tmp_pathspec = find_executable (argv[0]); + if (tmp_pathspec == NULL) + lt_fatal ("Couldn't find %s", argv[0]); + LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n", + tmp_pathspec)); + + actual_cwrapper_path = chase_symlinks (tmp_pathspec); + LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n", + actual_cwrapper_path)); + XFREE (tmp_pathspec); + + actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path)); + strendzap (actual_cwrapper_path, actual_cwrapper_name); + + /* wrapper name transforms */ + strendzap (actual_cwrapper_name, ".exe"); + tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1); + XFREE (actual_cwrapper_name); + actual_cwrapper_name = tmp_pathspec; + tmp_pathspec = 0; + + /* target_name transforms -- use actual target program name; might have lt- prefix */ + target_name = xstrdup (base_name (TARGET_PROGRAM_NAME)); + strendzap (target_name, ".exe"); + tmp_pathspec = lt_extend_str (target_name, ".exe", 1); + XFREE (target_name); + target_name = tmp_pathspec; + tmp_pathspec = 0; + + LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n", + target_name)); +EOF + + cat <<EOF + newargz[0] = + XMALLOC (char, (strlen (actual_cwrapper_path) + + strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1)); + strcpy (newargz[0], actual_cwrapper_path); + strcat (newargz[0], "$objdir"); + strcat (newargz[0], "/"); +EOF + + cat <<"EOF" + /* stop here, and copy so we don't have to do this twice */ + tmp_pathspec = xstrdup (newargz[0]); + + /* do NOT want the lt- prefix here, so use actual_cwrapper_name */ + strcat (newargz[0], actual_cwrapper_name); + + /* DO want the lt- prefix here if it exists, so use target_name */ + lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1); + XFREE (tmp_pathspec); + tmp_pathspec = NULL; +EOF + + case $host_os in + mingw*) + cat <<"EOF" + { + char* p; + while ((p = strchr (newargz[0], '\\')) != NULL) + { + *p = '/'; + } + while ((p = strchr (lt_argv_zero, '\\')) != NULL) + { + *p = '/'; + } + } +EOF + ;; + esac + + cat <<"EOF" + XFREE (target_name); + XFREE (actual_cwrapper_path); + XFREE (actual_cwrapper_name); + + lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */ + lt_setenv ("DUALCASE", "1"); /* for MSK sh */ + lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE); + lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE); + + newargc=0; + for (i = 1; i < argc; i++) + { + if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0) + { + if (argv[i][env_set_opt_len] == '=') + { + const char *p = argv[i] + env_set_opt_len + 1; + lt_opt_process_env_set (p); + } + else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc) + { + lt_opt_process_env_set (argv[++i]); /* don't copy */ + } + else + lt_fatal ("%s missing required argument", env_set_opt); + continue; + } + if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0) + { + if (argv[i][env_prepend_opt_len] == '=') + { + const char *p = argv[i] + env_prepend_opt_len + 1; + lt_opt_process_env_prepend (p); + } + else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc) + { + lt_opt_process_env_prepend (argv[++i]); /* don't copy */ + } + else + lt_fatal ("%s missing required argument", env_prepend_opt); + continue; + } + if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0) + { + if (argv[i][env_append_opt_len] == '=') + { + const char *p = argv[i] + env_append_opt_len + 1; + lt_opt_process_env_append (p); + } + else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc) + { + lt_opt_process_env_append (argv[++i]); /* don't copy */ + } + else + lt_fatal ("%s missing required argument", env_append_opt); + continue; + } + if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0) + { + /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX + namespace, but it is not one of the ones we know about and + have already dealt with, above (inluding dump-script), then + report an error. Otherwise, targets might begin to believe + they are allowed to use options in the LTWRAPPER_OPTION_PREFIX + namespace. The first time any user complains about this, we'll + need to make LTWRAPPER_OPTION_PREFIX a configure-time option + or a configure.ac-settable value. + */ + lt_fatal ("Unrecognized option in %s namespace: '%s'", + ltwrapper_option_prefix, argv[i]); + } + /* otherwise ... */ + newargz[++newargc] = xstrdup (argv[i]); + } + newargz[++newargc] = NULL; + + LTWRAPPER_DEBUGPRINTF (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>"))); + for (i = 0; i < newargc; i++) + { + LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d] : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>"))); + } + +EOF + + case $host_os in + mingw*) + cat <<"EOF" + /* execv doesn't actually work on mingw as expected on unix */ + rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz); + if (rval == -1) + { + /* failed to start process */ + LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno)); + return 127; + } + return rval; +EOF + ;; + *) + cat <<"EOF" + execv (lt_argv_zero, newargz); + return rval; /* =127, but avoids unused variable warning */ +EOF + ;; + esac + + cat <<"EOF" +} + +void * +xmalloc (size_t num) +{ + void *p = (void *) malloc (num); + if (!p) + lt_fatal ("Memory exhausted"); + + return p; +} + +char * +xstrdup (const char *string) +{ + return string ? strcpy ((char *) xmalloc (strlen (string) + 1), + string) : NULL; +} + +const char * +base_name (const char *name) +{ + const char *base; + +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + /* Skip over the disk name in MSDOS pathnames. */ + if (isalpha ((unsigned char) name[0]) && name[1] == ':') + name += 2; +#endif + + for (base = name; *name; name++) + if (IS_DIR_SEPARATOR (*name)) + base = name + 1; + return base; +} + +int +check_executable (const char *path) +{ + struct stat st; + + LTWRAPPER_DEBUGPRINTF (("(check_executable) : %s\n", + path ? (*path ? path : "EMPTY!") : "NULL!")); + if ((!path) || (!*path)) + return 0; + + if ((stat (path, &st) >= 0) + && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) + return 1; + else + return 0; +} + +int +make_executable (const char *path) +{ + int rval = 0; + struct stat st; + + LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n", + path ? (*path ? path : "EMPTY!") : "NULL!")); + if ((!path) || (!*path)) + return 0; + + if (stat (path, &st) >= 0) + { + rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); + } + return rval; +} + +/* Searches for the full path of the wrapper. Returns + newly allocated full path name if found, NULL otherwise + Does not chase symlinks, even on platforms that support them. +*/ +char * +find_executable (const char *wrapper) +{ + int has_slash = 0; + const char *p; + const char *p_next; + /* static buffer for getcwd */ + char tmp[LT_PATHMAX + 1]; + int tmp_len; + char *concat_name; + + LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n", + wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!")); + + if ((wrapper == NULL) || (*wrapper == '\0')) + return NULL; + + /* Absolute path? */ +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + else + { +#endif + if (IS_DIR_SEPARATOR (wrapper[0])) + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + } +#endif + + for (p = wrapper; *p; p++) + if (*p == '/') + { + has_slash = 1; + break; + } + if (!has_slash) + { + /* no slashes; search PATH */ + const char *path = getenv ("PATH"); + if (path != NULL) + { + for (p = path; *p; p = p_next) + { + const char *q; + size_t p_len; + for (q = p; *q; q++) + if (IS_PATH_SEPARATOR (*q)) + break; + p_len = q - p; + p_next = (*q == '\0' ? q : q + 1); + if (p_len == 0) + { + /* empty path: current directory */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal ("getcwd failed"); + tmp_len = strlen (tmp); + concat_name = + XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + } + else + { + concat_name = + XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, p, p_len); + concat_name[p_len] = '/'; + strcpy (concat_name + p_len + 1, wrapper); + } + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + } + /* not found in PATH; assume curdir */ + } + /* Relative path | not found in path: prepend cwd */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal ("getcwd failed"); + tmp_len = strlen (tmp); + concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + return NULL; +} + +char * +chase_symlinks (const char *pathspec) +{ +#ifndef S_ISLNK + return xstrdup (pathspec); +#else + char buf[LT_PATHMAX]; + struct stat s; + char *tmp_pathspec = xstrdup (pathspec); + char *p; + int has_symlinks = 0; + while (strlen (tmp_pathspec) && !has_symlinks) + { + LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n", + tmp_pathspec)); + if (lstat (tmp_pathspec, &s) == 0) + { + if (S_ISLNK (s.st_mode) != 0) + { + has_symlinks = 1; + break; + } + + /* search backwards for last DIR_SEPARATOR */ + p = tmp_pathspec + strlen (tmp_pathspec) - 1; + while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + p--; + if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + { + /* no more DIR_SEPARATORS left */ + break; + } + *p = '\0'; + } + else + { + char *errstr = strerror (errno); + lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr); + } + } + XFREE (tmp_pathspec); + + if (!has_symlinks) + { + return xstrdup (pathspec); + } + + tmp_pathspec = realpath (pathspec, buf); + if (tmp_pathspec == 0) + { + lt_fatal ("Could not follow symlinks for %s", pathspec); + } + return xstrdup (tmp_pathspec); +#endif +} + +char * +strendzap (char *str, const char *pat) +{ + size_t len, patlen; + + assert (str != NULL); + assert (pat != NULL); + + len = strlen (str); + patlen = strlen (pat); + + if (patlen <= len) + { + str += len - patlen; + if (strcmp (str, pat) == 0) + *str = '\0'; + } + return str; +} + +static void +lt_error_core (int exit_status, const char *mode, + const char *message, va_list ap) +{ + fprintf (stderr, "%s: %s: ", program_name, mode); + vfprintf (stderr, message, ap); + fprintf (stderr, ".\n"); + + if (exit_status >= 0) + exit (exit_status); +} + +void +lt_fatal (const char *message, ...) +{ + va_list ap; + va_start (ap, message); + lt_error_core (EXIT_FAILURE, "FATAL", message, ap); + va_end (ap); +} + +void +lt_setenv (const char *name, const char *value) +{ + LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n", + (name ? name : "<NULL>"), + (value ? value : "<NULL>"))); + { +#ifdef HAVE_SETENV + /* always make a copy, for consistency with !HAVE_SETENV */ + char *str = xstrdup (value); + setenv (name, str, 1); +#else + int len = strlen (name) + 1 + strlen (value) + 1; + char *str = XMALLOC (char, len); + sprintf (str, "%s=%s", name, value); + if (putenv (str) != EXIT_SUCCESS) + { + XFREE (str); + } +#endif + } +} + +char * +lt_extend_str (const char *orig_value, const char *add, int to_end) +{ + char *new_value; + if (orig_value && *orig_value) + { + int orig_value_len = strlen (orig_value); + int add_len = strlen (add); + new_value = XMALLOC (char, add_len + orig_value_len + 1); + if (to_end) + { + strcpy (new_value, orig_value); + strcpy (new_value + orig_value_len, add); + } + else + { + strcpy (new_value, add); + strcpy (new_value + add_len, orig_value); + } + } + else + { + new_value = xstrdup (add); + } + return new_value; +} + +int +lt_split_name_value (const char *arg, char** name, char** value) +{ + const char *p; + int len; + if (!arg || !*arg) + return 1; + + p = strchr (arg, (int)'='); + + if (!p) + return 1; + + *value = xstrdup (++p); + + len = strlen (arg) - strlen (*value); + *name = XMALLOC (char, len); + strncpy (*name, arg, len-1); + (*name)[len - 1] = '\0'; + + return 0; +} + +void +lt_opt_process_env_set (const char *arg) +{ + char *name = NULL; + char *value = NULL; + + if (lt_split_name_value (arg, &name, &value) != 0) + { + XFREE (name); + XFREE (value); + lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg); + } + + lt_setenv (name, value); + XFREE (name); + XFREE (value); +} + +void +lt_opt_process_env_prepend (const char *arg) +{ + char *name = NULL; + char *value = NULL; + char *new_value = NULL; + + if (lt_split_name_value (arg, &name, &value) != 0) + { + XFREE (name); + XFREE (value); + lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg); + } + + new_value = lt_extend_str (getenv (name), value, 0); + lt_setenv (name, new_value); + XFREE (new_value); + XFREE (name); + XFREE (value); +} + +void +lt_opt_process_env_append (const char *arg) +{ + char *name = NULL; + char *value = NULL; + char *new_value = NULL; + + if (lt_split_name_value (arg, &name, &value) != 0) + { + XFREE (name); + XFREE (value); + lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg); + } + + new_value = lt_extend_str (getenv (name), value, 1); + lt_setenv (name, new_value); + XFREE (new_value); + XFREE (name); + XFREE (value); +} + +void +lt_update_exe_path (const char *name, const char *value) +{ + LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n", + (name ? name : "<NULL>"), + (value ? value : "<NULL>"))); + + if (name && *name && value && *value) + { + char *new_value = lt_extend_str (getenv (name), value, 0); + /* some systems can't cope with a ':'-terminated path #' */ + int len = strlen (new_value); + while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1])) + { + new_value[len-1] = '\0'; + } + lt_setenv (name, new_value); + XFREE (new_value); + } +} + +void +lt_update_lib_path (const char *name, const char *value) +{ + LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n", + (name ? name : "<NULL>"), + (value ? value : "<NULL>"))); + + if (name && *name && value && *value) + { + char *new_value = lt_extend_str (getenv (name), value, 0); + lt_setenv (name, new_value); + XFREE (new_value); + } +} + + +EOF +} +# end: func_emit_cwrapperexe_src + +# func_mode_link arg... +func_mode_link () +{ + $opt_debug + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + # It is impossible to link a dll without this setting, and + # we shouldn't force the makefile maintainer to figure out + # which system we are compiling for in order to pass an extra + # flag for every libtool invocation. + # allow_undefined=no + + # FIXME: Unfortunately, there are problems with the above when trying + # to make a dll which has undefined symbols, in which case not + # even a static library is built. For now, we need to specify + # -no-undefined on the libtool link line when we can be certain + # that all symbols are satisfied, otherwise we get a static library. + allow_undefined=yes + ;; + *) + allow_undefined=yes + ;; + esac + libtool_args=$nonopt + base_compile="$nonopt $@" + compile_command=$nonopt + finalize_command=$nonopt + + compile_rpath= + finalize_rpath= + compile_shlibpath= + finalize_shlibpath= + convenience= + old_convenience= + deplibs= + old_deplibs= + compiler_flags= + linker_flags= + dllsearchpath= + lib_search_path=`pwd` + inst_prefix_dir= + new_inherited_linker_flags= + + avoid_version=no + dlfiles= + dlprefiles= + dlself=no + export_dynamic=no + export_symbols= + export_symbols_regex= + generated= + libobjs= + ltlibs= + module=no + no_install=no + objs= + non_pic_objects= + precious_files_regex= + prefer_static_libs=no + preload=no + prev= + prevarg= + release= + rpath= + xrpath= + perm_rpath= + temp_rpath= + thread_safe=no + vinfo= + vinfo_number=no + weak_libs= + single_module="${wl}-single_module" + func_infer_tag $base_compile + + # We need to know -static, to get the right output filenames. + for arg + do + case $arg in + -shared) + test "$build_libtool_libs" != yes && \ + func_fatal_configuration "can not build a shared library" + build_old_libs=no + break + ;; + -all-static | -static | -static-libtool-libs) + case $arg in + -all-static) + if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then + func_warning "complete static linking is impossible in this configuration" + fi + if test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + -static) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=built + ;; + -static-libtool-libs) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + esac + build_libtool_libs=no + build_old_libs=yes + break + ;; + esac + done + + # See if our shared archives depend on static archives. + test -n "$old_archive_from_new_cmds" && build_old_libs=yes + + # Go through the arguments, transforming them on the way. + while test "$#" -gt 0; do + arg="$1" + shift + func_quote_for_eval "$arg" + qarg=$func_quote_for_eval_unquoted_result + func_append libtool_args " $func_quote_for_eval_result" + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case $prev in + output) + func_append compile_command " @OUTPUT@" + func_append finalize_command " @OUTPUT@" + ;; + esac + + case $prev in + dlfiles|dlprefiles) + if test "$preload" = no; then + # Add the symbol object into the linking commands. + func_append compile_command " @SYMFILE@" + func_append finalize_command " @SYMFILE@" + preload=yes + fi + case $arg in + *.la | *.lo) ;; # We handle these cases below. + force) + if test "$dlself" = no; then + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + self) + if test "$prev" = dlprefiles; then + dlself=yes + elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then + dlself=yes + else + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + *) + if test "$prev" = dlfiles; then + dlfiles="$dlfiles $arg" + else + dlprefiles="$dlprefiles $arg" + fi + prev= + continue + ;; + esac + ;; + expsyms) + export_symbols="$arg" + test -f "$arg" \ + || func_fatal_error "symbol file \`$arg' does not exist" + prev= + continue + ;; + expsyms_regex) + export_symbols_regex="$arg" + prev= + continue + ;; + framework) + case $host in + *-*-darwin*) + case "$deplibs " in + *" $qarg.ltframework "*) ;; + *) deplibs="$deplibs $qarg.ltframework" # this is fixed later + ;; + esac + ;; + esac + prev= + continue + ;; + inst_prefix) + inst_prefix_dir="$arg" + prev= + continue + ;; + objectlist) + if test -f "$arg"; then + save_arg=$arg + moreargs= + for fil in `cat "$save_arg"` + do +# moreargs="$moreargs $fil" + arg=$fil + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if func_lalib_unsafe_p "$arg"; then + pic_object= + non_pic_object= + + # Read the .lo file + func_source "$arg" + + if test -z "$pic_object" || + test -z "$non_pic_object" || + test "$pic_object" = none && + test "$non_pic_object" = none; then + func_fatal_error "cannot find name of object for \`$arg'" + fi + + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles $pic_object" + prev= + fi + + # A PIC object. + func_append libobjs " $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + func_append non_pic_objects " $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + func_append non_pic_objects " $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if $opt_dry_run; then + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "\`$arg' is not a valid libtool object" + fi + fi + done + else + func_fatal_error "link input file \`$arg' does not exist" + fi + arg=$save_arg + prev= + continue + ;; + precious_regex) + precious_files_regex="$arg" + prev= + continue + ;; + release) + release="-$arg" + prev= + continue + ;; + rpath | xrpath) + # We need an absolute path. + case $arg in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + func_fatal_error "only absolute run-paths are allowed" + ;; + esac + if test "$prev" = rpath; then + case "$rpath " in + *" $arg "*) ;; + *) rpath="$rpath $arg" ;; + esac + else + case "$xrpath " in + *" $arg "*) ;; + *) xrpath="$xrpath $arg" ;; + esac + fi + prev= + continue + ;; + shrext) + shrext_cmds="$arg" + prev= + continue + ;; + weak) + weak_libs="$weak_libs $arg" + prev= + continue + ;; + xcclinker) + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $qarg" + prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" + continue + ;; + xcompiler) + compiler_flags="$compiler_flags $qarg" + prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" + continue + ;; + xlinker) + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $wl$qarg" + prev= + func_append compile_command " $wl$qarg" + func_append finalize_command " $wl$qarg" + continue + ;; + *) + eval "$prev=\"\$arg\"" + prev= + continue + ;; + esac + fi # test -n "$prev" + + prevarg="$arg" + + case $arg in + -all-static) + if test -n "$link_static_flag"; then + # See comment for -static flag below, for more details. + func_append compile_command " $link_static_flag" + func_append finalize_command " $link_static_flag" + fi + continue + ;; + + -allow-undefined) + # FIXME: remove this flag sometime in the future. + func_fatal_error "\`-allow-undefined' must not be used because it is the default" + ;; + + -avoid-version) + avoid_version=yes + continue + ;; + + -dlopen) + prev=dlfiles + continue + ;; + + -dlpreopen) + prev=dlprefiles + continue + ;; + + -export-dynamic) + export_dynamic=yes + continue + ;; + + -export-symbols | -export-symbols-regex) + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + func_fatal_error "more than one -exported-symbols argument is not allowed" + fi + if test "X$arg" = "X-export-symbols"; then + prev=expsyms + else + prev=expsyms_regex + fi + continue + ;; + + -framework) + prev=framework + continue + ;; + + -inst-prefix-dir) + prev=inst_prefix + continue + ;; + + # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* + # so, if we see these flags be careful not to treat them like -L + -L[A-Z][A-Z]*:*) + case $with_gcc/$host in + no/*-*-irix* | /*-*-irix*) + func_append compile_command " $arg" + func_append finalize_command " $arg" + ;; + esac + continue + ;; + + -L*) + func_stripname '-L' '' "$arg" + dir=$func_stripname_result + if test -z "$dir"; then + if test "$#" -gt 0; then + func_fatal_error "require no space between \`-L' and \`$1'" + else + func_fatal_error "need path for \`-L' option" + fi + fi + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + absdir=`cd "$dir" && pwd` + test -z "$absdir" && \ + func_fatal_error "cannot determine absolute directory name of \`$dir'" + dir="$absdir" + ;; + esac + case "$deplibs " in + *" -L$dir "*) ;; + *) + deplibs="$deplibs -L$dir" + lib_search_path="$lib_search_path $dir" + ;; + esac + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$dir:"*) ;; + ::) dllsearchpath=$dir;; + *) dllsearchpath="$dllsearchpath:$dir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + ::) dllsearchpath=$testbindir;; + *) dllsearchpath="$dllsearchpath:$testbindir";; + esac + ;; + esac + continue + ;; + + -l*) + if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*) + # These systems don't actually have a C or math library (as such) + continue + ;; + *-*-os2*) + # These systems don't actually have a C library (as such) + test "X$arg" = "X-lc" && continue + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + test "X$arg" = "X-lc" && continue + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C and math libraries are in the System framework + deplibs="$deplibs System.ltframework" + continue + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + test "X$arg" = "X-lc" && continue + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + test "X$arg" = "X-lc" && continue + ;; + esac + elif test "X$arg" = "X-lc_r"; then + case $host in + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc_r directly, use -pthread flag. + continue + ;; + esac + fi + deplibs="$deplibs $arg" + continue + ;; + + -module) + module=yes + continue + ;; + + # Tru64 UNIX uses -model [arg] to determine the layout of C++ + # classes, name mangling, and exception handling. + # Darwin uses the -arch flag to determine output architecture. + -model|-arch|-isysroot) + compiler_flags="$compiler_flags $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + prev=xcompiler + continue + ;; + + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) + compiler_flags="$compiler_flags $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + case "$new_inherited_linker_flags " in + *" $arg "*) ;; + * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;; + esac + continue + ;; + + -multi_module) + single_module="${wl}-multi_module" + continue + ;; + + -no-fast-install) + fast_install=no + continue + ;; + + -no-install) + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) + # The PATH hackery in wrapper scripts is required on Windows + # and Darwin in order for the loader to find any dlls it needs. + func_warning "\`-no-install' is ignored for $host" + func_warning "assuming \`-no-fast-install' instead" + fast_install=no + ;; + *) no_install=yes ;; + esac + continue + ;; + + -no-undefined) + allow_undefined=no + continue + ;; + + -objectlist) + prev=objectlist + continue + ;; + + -o) prev=output ;; + + -precious-files-regex) + prev=precious_regex + continue + ;; + + -release) + prev=release + continue + ;; + + -rpath) + prev=rpath + continue + ;; + + -R) + prev=xrpath + continue + ;; + + -R*) + func_stripname '-R' '' "$arg" + dir=$func_stripname_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + func_fatal_error "only absolute run-paths are allowed" + ;; + esac + case "$xrpath " in + *" $dir "*) ;; + *) xrpath="$xrpath $dir" ;; + esac + continue + ;; + + -shared) + # The effects of -shared are defined in a previous loop. + continue + ;; + + -shrext) + prev=shrext + continue + ;; + + -static | -static-libtool-libs) + # The effects of -static are defined in a previous loop. + # We used to do the same as -all-static on platforms that + # didn't have a PIC flag, but the assumption that the effects + # would be equivalent was wrong. It would break on at least + # Digital Unix and AIX. + continue + ;; + + -thread-safe) + thread_safe=yes + continue + ;; + + -version-info) + prev=vinfo + continue + ;; + + -version-number) + prev=vinfo + vinfo_number=yes + continue + ;; + + -weak) + prev=weak + continue + ;; + + -Wc,*) + func_stripname '-Wc,' '' "$arg" + args=$func_stripname_result + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + func_quote_for_eval "$flag" + arg="$arg $wl$func_quote_for_eval_result" + compiler_flags="$compiler_flags $func_quote_for_eval_result" + done + IFS="$save_ifs" + func_stripname ' ' '' "$arg" + arg=$func_stripname_result + ;; + + -Wl,*) + func_stripname '-Wl,' '' "$arg" + args=$func_stripname_result + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + func_quote_for_eval "$flag" + arg="$arg $wl$func_quote_for_eval_result" + compiler_flags="$compiler_flags $wl$func_quote_for_eval_result" + linker_flags="$linker_flags $func_quote_for_eval_result" + done + IFS="$save_ifs" + func_stripname ' ' '' "$arg" + arg=$func_stripname_result + ;; + + -Xcompiler) + prev=xcompiler + continue + ;; + + -Xlinker) + prev=xlinker + continue + ;; + + -XCClinker) + prev=xcclinker + continue + ;; + + # -msg_* for osf cc + -msg_*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + + # -64, -mips[0-9] enable 64-bit mode on the SGI compiler + # -r[0-9][0-9]* specifies the processor on the SGI compiler + # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler + # +DA*, +DD* enable 64-bit mode on the HP compiler + # -q* pass through compiler args for the IBM compiler + # -m*, -t[45]*, -txscale* pass through architecture-specific + # compiler args for GCC + # -F/path gives path to uninstalled frameworks, gcc on darwin + # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC + # @file GCC response files + -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ + -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + func_append compile_command " $arg" + func_append finalize_command " $arg" + compiler_flags="$compiler_flags $arg" + continue + ;; + + # Some other compiler flag. + -* | +*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + + *.$objext) + # A standard object. + objs="$objs $arg" + ;; + + *.lo) + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if func_lalib_unsafe_p "$arg"; then + pic_object= + non_pic_object= + + # Read the .lo file + func_source "$arg" + + if test -z "$pic_object" || + test -z "$non_pic_object" || + test "$pic_object" = none && + test "$non_pic_object" = none; then + func_fatal_error "cannot find name of object for \`$arg'" + fi + + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles $pic_object" + prev= + fi + + # A PIC object. + func_append libobjs " $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + func_append non_pic_objects " $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + func_append non_pic_objects " $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if $opt_dry_run; then + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "\`$arg' is not a valid libtool object" + fi + fi + ;; + + *.$libext) + # An archive. + deplibs="$deplibs $arg" + old_deplibs="$old_deplibs $arg" + continue + ;; + + *.la) + # A libtool-controlled library. + + if test "$prev" = dlfiles; then + # This library was specified with -dlopen. + dlfiles="$dlfiles $arg" + prev= + elif test "$prev" = dlprefiles; then + # The library was specified with -dlpreopen. + dlprefiles="$dlprefiles $arg" + prev= + else + deplibs="$deplibs $arg" + fi + continue + ;; + + # Some other compiler argument. + *) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + esac # arg + + # Now actually substitute the argument into the commands. + if test -n "$arg"; then + func_append compile_command " $arg" + func_append finalize_command " $arg" + fi + done # argument parsing loop + + test -n "$prev" && \ + func_fatal_help "the \`$prevarg' option requires an argument" + + if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then + eval arg=\"$export_dynamic_flag_spec\" + func_append compile_command " $arg" + func_append finalize_command " $arg" + fi + + oldlibs= + # calculate the name of the file, without its directory + func_basename "$output" + outputname="$func_basename_result" + libobjs_save="$libobjs" + + if test -n "$shlibpath_var"; then + # get the directories listed in $shlibpath_var + eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` + else + shlib_search_path= + fi + eval sys_lib_search_path=\"$sys_lib_search_path_spec\" + eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" + + func_dirname "$output" "/" "" + output_objdir="$func_dirname_result$objdir" + # Create the object directory. + func_mkdir_p "$output_objdir" + + # Determine the type of output + case $output in + "") + func_fatal_help "you must specify an output file" + ;; + *.$libext) linkmode=oldlib ;; + *.lo | *.$objext) linkmode=obj ;; + *.la) linkmode=lib ;; + *) linkmode=prog ;; # Anything else should be a program. + esac + + specialdeplibs= + + libs= + # Find all interdependent deplibs by searching for libraries + # that are linked more than once (e.g. -la -lb -la) + for deplib in $deplibs; do + if $opt_duplicate_deps ; then + case "$libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + libs="$libs $deplib" + done + + if test "$linkmode" = lib; then + libs="$predeps $libs $compiler_lib_search_path $postdeps" + + # Compute libraries that are listed more than once in $predeps + # $postdeps and mark them as special (i.e., whose duplicates are + # not to be eliminated). + pre_post_deps= + if $opt_duplicate_compiler_generated_deps; then + for pre_post_dep in $predeps $postdeps; do + case "$pre_post_deps " in + *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; + esac + pre_post_deps="$pre_post_deps $pre_post_dep" + done + fi + pre_post_deps= + fi + + deplibs= + newdependency_libs= + newlib_search_path= + need_relink=no # whether we're linking any uninstalled libtool libraries + notinst_deplibs= # not-installed libtool libraries + notinst_path= # paths that contain not-installed libtool libraries + + case $linkmode in + lib) + passes="conv dlpreopen link" + for file in $dlfiles $dlprefiles; do + case $file in + *.la) ;; + *) + func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" + ;; + esac + done + ;; + prog) + compile_deplibs= + finalize_deplibs= + alldeplibs=no + newdlfiles= + newdlprefiles= + passes="conv scan dlopen dlpreopen link" + ;; + *) passes="conv" + ;; + esac + + for pass in $passes; do + # The preopen pass in lib mode reverses $deplibs; put it back here + # so that -L comes before libs that need it for instance... + if test "$linkmode,$pass" = "lib,link"; then + ## FIXME: Find the place where the list is rebuilt in the wrong + ## order, and fix it there properly + tmp_deplibs= + for deplib in $deplibs; do + tmp_deplibs="$deplib $tmp_deplibs" + done + deplibs="$tmp_deplibs" + fi + + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan"; then + libs="$deplibs" + deplibs= + fi + if test "$linkmode" = prog; then + case $pass in + dlopen) libs="$dlfiles" ;; + dlpreopen) libs="$dlprefiles" ;; + link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; + esac + fi + if test "$linkmode,$pass" = "lib,dlpreopen"; then + # Collect and forward deplibs of preopened libtool libs + for lib in $dlprefiles; do + # Ignore non-libtool-libs + dependency_libs= + case $lib in + *.la) func_source "$lib" ;; + esac + + # Collect preopened libtool deplibs, except any this library + # has declared as weak libs + for deplib in $dependency_libs; do + deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"` + case " $weak_libs " in + *" $deplib_base "*) ;; + *) deplibs="$deplibs $deplib" ;; + esac + done + done + libs="$dlprefiles" + fi + if test "$pass" = dlopen; then + # Collect dlpreopened libraries + save_deplibs="$deplibs" + deplibs= + fi + + for deplib in $libs; do + lib= + found=no + case $deplib in + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + compiler_flags="$compiler_flags $deplib" + if test "$linkmode" = lib ; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; + esac + fi + fi + continue + ;; + -l*) + if test "$linkmode" != lib && test "$linkmode" != prog; then + func_warning "\`-l' is ignored for archives/objects" + continue + fi + func_stripname '-l' '' "$deplib" + name=$func_stripname_result + if test "$linkmode" = lib; then + searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" + else + searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" + fi + for searchdir in $searchdirs; do + for search_ext in .la $std_shrext .so .a; do + # Search the libtool library + lib="$searchdir/lib${name}${search_ext}" + if test -f "$lib"; then + if test "$search_ext" = ".la"; then + found=yes + else + found=no + fi + break 2 + fi + done + done + if test "$found" != yes; then + # deplib doesn't seem to be a libtool library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + else # deplib is a libtool library + # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, + # We need to do some special things here, and not later. + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $deplib "*) + if func_lalib_p "$lib"; then + library_names= + old_library= + func_source "$lib" + for l in $old_library $library_names; do + ll="$l" + done + if test "X$ll" = "X$old_library" ; then # only static version available + found=no + func_dirname "$lib" "" "." + ladir="$func_dirname_result" + lib=$ladir/$old_library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + fi + fi + ;; + *) ;; + esac + fi + fi + ;; # -l + *.ltframework) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + if test "$linkmode" = lib ; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; + esac + fi + fi + continue + ;; + -L*) + case $linkmode in + lib) + deplibs="$deplib $deplibs" + test "$pass" = conv && continue + newdependency_libs="$deplib $newdependency_libs" + func_stripname '-L' '' "$deplib" + newlib_search_path="$newlib_search_path $func_stripname_result" + ;; + prog) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + if test "$pass" = scan; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + func_stripname '-L' '' "$deplib" + newlib_search_path="$newlib_search_path $func_stripname_result" + ;; + *) + func_warning "\`-L' is ignored for archives/objects" + ;; + esac # linkmode + continue + ;; # -L + -R*) + if test "$pass" = link; then + func_stripname '-R' '' "$deplib" + dir=$func_stripname_result + # Make sure the xrpath contains only unique directories. + case "$xrpath " in + *" $dir "*) ;; + *) xrpath="$xrpath $dir" ;; + esac + fi + deplibs="$deplib $deplibs" + continue + ;; + *.la) lib="$deplib" ;; + *.$libext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + case $linkmode in + lib) + # Linking convenience modules into shared libraries is allowed, + # but linking other static libraries is non-portable. + case " $dlpreconveniencelibs " in + *" $deplib "*) ;; + *) + valid_a_lib=no + case $deplibs_check_method in + match_pattern*) + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \ + | $EGREP "$match_pattern_regex" > /dev/null; then + valid_a_lib=yes + fi + ;; + pass_all) + valid_a_lib=yes + ;; + esac + if test "$valid_a_lib" != yes; then + $ECHO + $ECHO "*** Warning: Trying to link with static lib archive $deplib." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have" + $ECHO "*** because the file extensions .$libext of this argument makes me believe" + $ECHO "*** that it is just a static archive that I should not use here." + else + $ECHO + $ECHO "*** Warning: Linking the shared library $output against the" + $ECHO "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + fi + ;; + esac + continue + ;; + prog) + if test "$pass" != link; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + continue + ;; + esac # linkmode + ;; # *.$libext + *.lo | *.$objext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + elif test "$linkmode" = prog; then + if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlopen support or we're linking statically, + # we need to preload. + newdlprefiles="$newdlprefiles $deplib" + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + newdlfiles="$newdlfiles $deplib" + fi + fi + continue + ;; + %DEPLIBS%) + alldeplibs=yes + continue + ;; + esac # case $deplib + + if test "$found" = yes || test -f "$lib"; then : + else + func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" + fi + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$lib" \ + || func_fatal_error "\`$lib' is not a valid libtool archive" + + func_dirname "$lib" "" "." + ladir="$func_dirname_result" + + dlname= + dlopen= + dlpreopen= + libdir= + library_names= + old_library= + inherited_linker_flags= + # If the library was installed with an old release of libtool, + # it will not redefine variables installed, or shouldnotlink + installed=yes + shouldnotlink=no + avoidtemprpath= + + + # Read the .la file + func_source "$lib" + + # Convert "-framework foo" to "foo.ltframework" + if test -n "$inherited_linker_flags"; then + tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'` + for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do + case " $new_inherited_linker_flags " in + *" $tmp_inherited_linker_flag "*) ;; + *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";; + esac + done + fi + dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan" || + { test "$linkmode" != prog && test "$linkmode" != lib; }; then + test -n "$dlopen" && dlfiles="$dlfiles $dlopen" + test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" + fi + + if test "$pass" = conv; then + # Only check for convenience libraries + deplibs="$lib $deplibs" + if test -z "$libdir"; then + if test -z "$old_library"; then + func_fatal_error "cannot find name of link library for \`$lib'" + fi + # It is a libtool convenience library, so add in its objects. + convenience="$convenience $ladir/$objdir/$old_library" + old_convenience="$old_convenience $ladir/$objdir/$old_library" + elif test "$linkmode" != prog && test "$linkmode" != lib; then + func_fatal_error "\`$lib' is not a convenience library" + fi + tmp_libs= + for deplib in $dependency_libs; do + deplibs="$deplib $deplibs" + if $opt_duplicate_deps ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done + continue + fi # $pass = conv + + + # Get the name of the library we link against. + linklib= + for l in $old_library $library_names; do + linklib="$l" + done + if test -z "$linklib"; then + func_fatal_error "cannot find name of link library for \`$lib'" + fi + + # This library was specified with -dlopen. + if test "$pass" = dlopen; then + if test -z "$libdir"; then + func_fatal_error "cannot -dlopen a convenience library: \`$lib'" + fi + if test -z "$dlname" || + test "$dlopen_support" != yes || + test "$build_libtool_libs" = no; then + # If there is no dlname, no dlopen support or we're linking + # statically, we need to preload. We also need to preload any + # dependent libraries so libltdl's deplib preloader doesn't + # bomb out in the load deplibs phase. + dlprefiles="$dlprefiles $lib $dependency_libs" + else + newdlfiles="$newdlfiles $lib" + fi + continue + fi # $pass = dlopen + + # We need an absolute path. + case $ladir in + [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; + *) + abs_ladir=`cd "$ladir" && pwd` + if test -z "$abs_ladir"; then + func_warning "cannot determine absolute directory name of \`$ladir'" + func_warning "passing it literally to the linker, although it might fail" + abs_ladir="$ladir" + fi + ;; + esac + func_basename "$lib" + laname="$func_basename_result" + + # Find the relevant object directory and library name. + if test "X$installed" = Xyes; then + if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then + func_warning "library \`$lib' was moved." + dir="$ladir" + absdir="$abs_ladir" + libdir="$abs_ladir" + else + dir="$libdir" + absdir="$libdir" + fi + test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes + else + if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then + dir="$ladir" + absdir="$abs_ladir" + # Remove this search path later + notinst_path="$notinst_path $abs_ladir" + else + dir="$ladir/$objdir" + absdir="$abs_ladir/$objdir" + # Remove this search path later + notinst_path="$notinst_path $abs_ladir" + fi + fi # $installed = yes + func_stripname 'lib' '.la' "$laname" + name=$func_stripname_result + + # This library was specified with -dlpreopen. + if test "$pass" = dlpreopen; then + if test -z "$libdir" && test "$linkmode" = prog; then + func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" + fi + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). + if test -n "$old_library"; then + newdlprefiles="$newdlprefiles $dir/$old_library" + # Keep a list of preopened convenience libraries to check + # that they are being used correctly in the link pass. + test -z "$libdir" && \ + dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library" + # Otherwise, use the dlname, so that lt_dlopen finds it. + elif test -n "$dlname"; then + newdlprefiles="$newdlprefiles $dir/$dlname" + else + newdlprefiles="$newdlprefiles $dir/$linklib" + fi + fi # $pass = dlpreopen + + if test -z "$libdir"; then + # Link the convenience library + if test "$linkmode" = lib; then + deplibs="$dir/$old_library $deplibs" + elif test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$dir/$old_library $compile_deplibs" + finalize_deplibs="$dir/$old_library $finalize_deplibs" + else + deplibs="$lib $deplibs" # used for prog,scan pass + fi + continue + fi + + + if test "$linkmode" = prog && test "$pass" != link; then + newlib_search_path="$newlib_search_path $ladir" + deplibs="$lib $deplibs" + + linkalldeplibs=no + if test "$link_all_deplibs" != no || test -z "$library_names" || + test "$build_libtool_libs" = no; then + linkalldeplibs=yes + fi + + tmp_libs= + for deplib in $dependency_libs; do + case $deplib in + -L*) func_stripname '-L' '' "$deplib" + newlib_search_path="$newlib_search_path $func_stripname_result" + ;; + esac + # Need to link against all dependency_libs? + if test "$linkalldeplibs" = yes; then + deplibs="$deplib $deplibs" + else + # Need to hardcode shared library paths + # or/and link against static libraries + newdependency_libs="$deplib $newdependency_libs" + fi + if $opt_duplicate_deps ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done # for deplib + continue + fi # $linkmode = prog... + + if test "$linkmode,$pass" = "prog,link"; then + if test -n "$library_names" && + { { test "$prefer_static_libs" = no || + test "$prefer_static_libs,$installed" = "built,yes"; } || + test -z "$old_library"; }; then + # We need to hardcode the library path + if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then + # Make sure the rpath contains only unique directories. + case "$temp_rpath:" in + *"$absdir:"*) ;; + *) temp_rpath="$temp_rpath$absdir:" ;; + esac + fi + + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) compile_rpath="$compile_rpath $absdir" + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" + esac + ;; + esac + fi # $linkmode,$pass = prog,link... + + if test "$alldeplibs" = yes && + { test "$deplibs_check_method" = pass_all || + { test "$build_libtool_libs" = yes && + test -n "$library_names"; }; }; then + # We only need to search for static libraries + continue + fi + fi + + link_static=no # Whether the deplib will be linked statically + use_static_libs=$prefer_static_libs + if test "$use_static_libs" = built && test "$installed" = yes; then + use_static_libs=no + fi + if test -n "$library_names" && + { test "$use_static_libs" = no || test -z "$old_library"; }; then + case $host in + *cygwin* | *mingw* | *cegcc*) + # No point in relinking DLLs because paths are not encoded + notinst_deplibs="$notinst_deplibs $lib" + need_relink=no + ;; + *) + if test "$installed" = no; then + notinst_deplibs="$notinst_deplibs $lib" + need_relink=yes + fi + ;; + esac + # This is a shared library + + # Warn about portability, can't link against -module's on some + # systems (darwin). Don't bleat about dlopened modules though! + dlopenmodule="" + for dlpremoduletest in $dlprefiles; do + if test "X$dlpremoduletest" = "X$lib"; then + dlopenmodule="$dlpremoduletest" + break + fi + done + if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then + $ECHO + if test "$linkmode" = prog; then + $ECHO "*** Warning: Linking the executable $output against the loadable module" + else + $ECHO "*** Warning: Linking the shared library $output against the loadable module" + fi + $ECHO "*** $linklib is not portable!" + fi + if test "$linkmode" = lib && + test "$hardcode_into_libs" = yes; then + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) compile_rpath="$compile_rpath $absdir" + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" + esac + ;; + esac + fi + + if test -n "$old_archive_from_expsyms_cmds"; then + # figure out the soname + set dummy $library_names + shift + realname="$1" + shift + libname=`eval "\\$ECHO \"$libname_spec\""` + # use dlname if we got it. it's perfectly good, no? + if test -n "$dlname"; then + soname="$dlname" + elif test -n "$soname_spec"; then + # bleh windows + case $host in + *cygwin* | mingw* | *cegcc*) + func_arith $current - $age + major=$func_arith_result + versuffix="-$major" + ;; + esac + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + + # Make a new name for the extract_expsyms_cmds to use + soroot="$soname" + func_basename "$soroot" + soname="$func_basename_result" + func_stripname 'lib' '.dll' "$soname" + newlib=libimp-$func_stripname_result.a + + # If the library has no export list, then create one now + if test -f "$output_objdir/$soname-def"; then : + else + func_verbose "extracting exported symbol list from \`$soname'" + func_execute_cmds "$extract_expsyms_cmds" 'exit $?' + fi + + # Create $newlib + if test -f "$output_objdir/$newlib"; then :; else + func_verbose "generating import library for \`$soname'" + func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' + fi + # make sure the library variables are pointing to the new library + dir=$output_objdir + linklib=$newlib + fi # test -n "$old_archive_from_expsyms_cmds" + + if test "$linkmode" = prog || test "$mode" != relink; then + add_shlibpath= + add_dir= + add= + lib_linked=yes + case $hardcode_action in + immediate | unsupported) + if test "$hardcode_direct" = no; then + add="$dir/$linklib" + case $host in + *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; + *-*-sysv4*uw2*) add_dir="-L$dir" ;; + *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ + *-*-unixware7*) add_dir="-L$dir" ;; + *-*-darwin* ) + # if the lib is a (non-dlopened) module then we can not + # link against it, someone is ignoring the earlier warnings + if /usr/bin/file -L $add 2> /dev/null | + $GREP ": [^:]* bundle" >/dev/null ; then + if test "X$dlopenmodule" != "X$lib"; then + $ECHO "*** Warning: lib $linklib is a module, not a shared library" + if test -z "$old_library" ; then + $ECHO + $ECHO "*** And there doesn't seem to be a static archive available" + $ECHO "*** The link will probably fail, sorry" + else + add="$dir/$old_library" + fi + elif test -n "$old_library"; then + add="$dir/$old_library" + fi + fi + esac + elif test "$hardcode_minus_L" = no; then + case $host in + *-*-sunos*) add_shlibpath="$dir" ;; + esac + add_dir="-L$dir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = no; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + relink) + if test "$hardcode_direct" = yes && + test "$hardcode_direct_absolute" = no; then + add="$dir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$dir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + add_dir="$add_dir -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + *) lib_linked=no ;; + esac + + if test "$lib_linked" != yes; then + func_fatal_configuration "unsupported hardcode properties" + fi + + if test -n "$add_shlibpath"; then + case :$compile_shlibpath: in + *":$add_shlibpath:"*) ;; + *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; + esac + fi + if test "$linkmode" = prog; then + test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" + test -n "$add" && compile_deplibs="$add $compile_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + if test "$hardcode_direct" != yes && + test "$hardcode_minus_L" != yes && + test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + esac + fi + fi + fi + + if test "$linkmode" = prog || test "$mode" = relink; then + add_shlibpath= + add_dir= + add= + # Finalize command for both is simple: just hardcode it. + if test "$hardcode_direct" = yes && + test "$hardcode_direct_absolute" = no; then + add="$libdir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$libdir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + esac + add="-l$name" + elif test "$hardcode_automatic" = yes; then + if test -n "$inst_prefix_dir" && + test -f "$inst_prefix_dir$libdir/$linklib" ; then + add="$inst_prefix_dir$libdir/$linklib" + else + add="$libdir/$linklib" + fi + else + # We cannot seem to hardcode it, guess we'll fake it. + add_dir="-L$libdir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + add_dir="$add_dir -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + fi + + if test "$linkmode" = prog; then + test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" + test -n "$add" && finalize_deplibs="$add $finalize_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + fi + fi + elif test "$linkmode" = prog; then + # Here we assume that one of hardcode_direct or hardcode_minus_L + # is not unsupported. This is valid on all known static and + # shared platforms. + if test "$hardcode_direct" != unsupported; then + test -n "$old_library" && linklib="$old_library" + compile_deplibs="$dir/$linklib $compile_deplibs" + finalize_deplibs="$dir/$linklib $finalize_deplibs" + else + compile_deplibs="-l$name -L$dir $compile_deplibs" + finalize_deplibs="-l$name -L$dir $finalize_deplibs" + fi + elif test "$build_libtool_libs" = yes; then + # Not a shared library + if test "$deplibs_check_method" != pass_all; then + # We're trying link a shared library against a static one + # but the system doesn't support it. + + # Just print a warning and add the library to dependency_libs so + # that the program can be linked against the static library. + $ECHO + $ECHO "*** Warning: This system can not link to static lib archive $lib." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have." + if test "$module" = yes; then + $ECHO "*** But as you try to build a module library, libtool will still create " + $ECHO "*** a static module, that should work as long as the dlopening application" + $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime." + if test -z "$global_symbol_pipe"; then + $ECHO + $ECHO "*** However, this would only work if libtool was able to extract symbol" + $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" + $ECHO "*** not find such a program. So, this module is probably useless." + $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + else + deplibs="$dir/$old_library $deplibs" + link_static=yes + fi + fi # link shared/static library? + + if test "$linkmode" = lib; then + if test -n "$dependency_libs" && + { test "$hardcode_into_libs" != yes || + test "$build_old_libs" = yes || + test "$link_static" = yes; }; then + # Extract -R from dependency_libs + temp_deplibs= + for libdir in $dependency_libs; do + case $libdir in + -R*) func_stripname '-R' '' "$libdir" + temp_xrpath=$func_stripname_result + case " $xrpath " in + *" $temp_xrpath "*) ;; + *) xrpath="$xrpath $temp_xrpath";; + esac;; + *) temp_deplibs="$temp_deplibs $libdir";; + esac + done + dependency_libs="$temp_deplibs" + fi + + newlib_search_path="$newlib_search_path $absdir" + # Link against this library + test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" + # ... and its dependency_libs + tmp_libs= + for deplib in $dependency_libs; do + newdependency_libs="$deplib $newdependency_libs" + if $opt_duplicate_deps ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done + + if test "$link_all_deplibs" != no; then + # Add the search paths of all dependency libraries + for deplib in $dependency_libs; do + case $deplib in + -L*) path="$deplib" ;; + *.la) + func_dirname "$deplib" "" "." + dir="$func_dirname_result" + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + func_warning "cannot determine absolute directory name of \`$dir'" + absdir="$dir" + fi + ;; + esac + if $GREP "^installed=no" $deplib > /dev/null; then + case $host in + *-*-darwin*) + depdepl= + eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` + if test -n "$deplibrary_names" ; then + for tmp in $deplibrary_names ; do + depdepl=$tmp + done + if test -f "$absdir/$objdir/$depdepl" ; then + depdepl="$absdir/$objdir/$depdepl" + darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + if test -z "$darwin_install_name"; then + darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + fi + compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" + linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}" + path= + fi + fi + ;; + *) + path="-L$absdir/$objdir" + ;; + esac + else + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" + test "$absdir" != "$libdir" && \ + func_warning "\`$deplib' seems to be moved" + + path="-L$absdir" + fi + ;; + esac + case " $deplibs " in + *" $path "*) ;; + *) deplibs="$path $deplibs" ;; + esac + done + fi # link_all_deplibs != no + fi # linkmode = lib + done # for deplib in $libs + if test "$pass" = link; then + if test "$linkmode" = "prog"; then + compile_deplibs="$new_inherited_linker_flags $compile_deplibs" + finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" + else + compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + fi + fi + dependency_libs="$newdependency_libs" + if test "$pass" = dlpreopen; then + # Link the dlpreopened libraries before other libraries + for deplib in $save_deplibs; do + deplibs="$deplib $deplibs" + done + fi + if test "$pass" != dlopen; then + if test "$pass" != conv; then + # Make sure lib_search_path contains only unique directories. + lib_search_path= + for dir in $newlib_search_path; do + case "$lib_search_path " in + *" $dir "*) ;; + *) lib_search_path="$lib_search_path $dir" ;; + esac + done + newlib_search_path= + fi + + if test "$linkmode,$pass" != "prog,link"; then + vars="deplibs" + else + vars="compile_deplibs finalize_deplibs" + fi + for var in $vars dependency_libs; do + # Add libraries to $var in reverse order + eval tmp_libs=\"\$$var\" + new_libs= + for deplib in $tmp_libs; do + # FIXME: Pedantically, this is the right thing to do, so + # that some nasty dependency loop isn't accidentally + # broken: + #new_libs="$deplib $new_libs" + # Pragmatically, this seems to cause very few problems in + # practice: + case $deplib in + -L*) new_libs="$deplib $new_libs" ;; + -R*) ;; + *) + # And here is the reason: when a library appears more + # than once as an explicit dependence of a library, or + # is implicitly linked in more than once by the + # compiler, it is considered special, and multiple + # occurrences thereof are not removed. Compare this + # with having the same library being listed as a + # dependency of multiple other libraries: in this case, + # we know (pedantically, we assume) the library does not + # need to be listed more than once, so we keep only the + # last copy. This is not always right, but it is rare + # enough that we require users that really mean to play + # such unportable linking tricks to link the library + # using -Wl,-lname, so that libtool does not consider it + # for duplicate removal. + case " $specialdeplibs " in + *" $deplib "*) new_libs="$deplib $new_libs" ;; + *) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$deplib $new_libs" ;; + esac + ;; + esac + ;; + esac + done + tmp_libs= + for deplib in $new_libs; do + case $deplib in + -L*) + case " $tmp_libs " in + *" $deplib "*) ;; + *) tmp_libs="$tmp_libs $deplib" ;; + esac + ;; + *) tmp_libs="$tmp_libs $deplib" ;; + esac + done + eval $var=\"$tmp_libs\" + done # for var + fi + # Last step: remove runtime libs from dependency_libs + # (they stay in deplibs) + tmp_libs= + for i in $dependency_libs ; do + case " $predeps $postdeps $compiler_lib_search_path " in + *" $i "*) + i="" + ;; + esac + if test -n "$i" ; then + tmp_libs="$tmp_libs $i" + fi + done + dependency_libs=$tmp_libs + done # for pass + if test "$linkmode" = prog; then + dlfiles="$newdlfiles" + fi + if test "$linkmode" = prog || test "$linkmode" = lib; then + dlprefiles="$newdlprefiles" + fi + + case $linkmode in + oldlib) + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + func_warning "\`-dlopen' is ignored for archives" + fi + + case " $deplibs" in + *\ -l* | *\ -L*) + func_warning "\`-l' and \`-L' are ignored for archives" ;; + esac + + test -n "$rpath" && \ + func_warning "\`-rpath' is ignored for archives" + + test -n "$xrpath" && \ + func_warning "\`-R' is ignored for archives" + + test -n "$vinfo" && \ + func_warning "\`-version-info/-version-number' is ignored for archives" + + test -n "$release" && \ + func_warning "\`-release' is ignored for archives" + + test -n "$export_symbols$export_symbols_regex" && \ + func_warning "\`-export-symbols' is ignored for archives" + + # Now set the variables for building old libraries. + build_libtool_libs=no + oldlibs="$output" + objs="$objs$old_deplibs" + ;; + + lib) + # Make sure we only generate libraries of the form `libNAME.la'. + case $outputname in + lib*) + func_stripname 'lib' '.la' "$outputname" + name=$func_stripname_result + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + ;; + *) + test "$module" = no && \ + func_fatal_help "libtool library \`$output' must begin with \`lib'" + + if test "$need_lib_prefix" != no; then + # Add the "lib" prefix for modules if required + func_stripname '' '.la' "$outputname" + name=$func_stripname_result + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + else + func_stripname '' '.la' "$outputname" + libname=$func_stripname_result + fi + ;; + esac + + if test -n "$objs"; then + if test "$deplibs_check_method" != pass_all; then + func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" + else + $ECHO + $ECHO "*** Warning: Linking the shared library $output against the non-libtool" + $ECHO "*** objects $objs is not portable!" + libobjs="$libobjs $objs" + fi + fi + + test "$dlself" != no && \ + func_warning "\`-dlopen self' is ignored for libtool libraries" + + set dummy $rpath + shift + test "$#" -gt 1 && \ + func_warning "ignoring multiple \`-rpath's for a libtool library" + + install_libdir="$1" + + oldlibs= + if test -z "$rpath"; then + if test "$build_libtool_libs" = yes; then + # Building a libtool convenience library. + # Some compilers have problems with a `.al' extension so + # convenience libraries should have the same extension an + # archive normally would. + oldlibs="$output_objdir/$libname.$libext $oldlibs" + build_libtool_libs=convenience + build_old_libs=yes + fi + + test -n "$vinfo" && \ + func_warning "\`-version-info/-version-number' is ignored for convenience libraries" + + test -n "$release" && \ + func_warning "\`-release' is ignored for convenience libraries" + else + + # Parse the version information argument. + save_ifs="$IFS"; IFS=':' + set dummy $vinfo 0 0 0 + shift + IFS="$save_ifs" + + test -n "$7" && \ + func_fatal_help "too many parameters to \`-version-info'" + + # convert absolute version numbers to libtool ages + # this retains compatibility with .la files and attempts + # to make the code below a bit more comprehensible + + case $vinfo_number in + yes) + number_major="$1" + number_minor="$2" + number_revision="$3" + # + # There are really only two kinds -- those that + # use the current revision as the major version + # and those that subtract age and use age as + # a minor version. But, then there is irix + # which has an extra 1 added just for fun + # + case $version_type in + darwin|linux|osf|windows|none) + func_arith $number_major + $number_minor + current=$func_arith_result + age="$number_minor" + revision="$number_revision" + ;; + freebsd-aout|freebsd-elf|sunos) + current="$number_major" + revision="$number_minor" + age="0" + ;; + irix|nonstopux) + func_arith $number_major + $number_minor + current=$func_arith_result + age="$number_minor" + revision="$number_minor" + lt_irix_increment=no + ;; + esac + ;; + no) + current="$1" + revision="$2" + age="$3" + ;; + esac + + # Check that each of the things are valid numbers. + case $current in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "CURRENT \`$current' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + case $revision in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "REVISION \`$revision' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + case $age in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "AGE \`$age' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + if test "$age" -gt "$current"; then + func_error "AGE \`$age' is greater than the current interface number \`$current'" + func_fatal_error "\`$vinfo' is not valid version information" + fi + + # Calculate the version variables. + major= + versuffix= + verstring= + case $version_type in + none) ;; + + darwin) + # Like Linux, but with the current version available in + # verstring for coding it into the library header + func_arith $current - $age + major=.$func_arith_result + versuffix="$major.$age.$revision" + # Darwin ld doesn't like 0 for these options... + func_arith $current + 1 + minor_current=$func_arith_result + xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" + verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" + ;; + + freebsd-aout) + major=".$current" + versuffix=".$current.$revision"; + ;; + + freebsd-elf) + major=".$current" + versuffix=".$current" + ;; + + irix | nonstopux) + if test "X$lt_irix_increment" = "Xno"; then + func_arith $current - $age + else + func_arith $current - $age + 1 + fi + major=$func_arith_result + + case $version_type in + nonstopux) verstring_prefix=nonstopux ;; + *) verstring_prefix=sgi ;; + esac + verstring="$verstring_prefix$major.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$revision + while test "$loop" -ne 0; do + func_arith $revision - $loop + iface=$func_arith_result + func_arith $loop - 1 + loop=$func_arith_result + verstring="$verstring_prefix$major.$iface:$verstring" + done + + # Before this point, $major must not contain `.'. + major=.$major + versuffix="$major.$revision" + ;; + + linux) + func_arith $current - $age + major=.$func_arith_result + versuffix="$major.$age.$revision" + ;; + + osf) + func_arith $current - $age + major=.$func_arith_result + versuffix=".$current.$age.$revision" + verstring="$current.$age.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$age + while test "$loop" -ne 0; do + func_arith $current - $loop + iface=$func_arith_result + func_arith $loop - 1 + loop=$func_arith_result + verstring="$verstring:${iface}.0" + done + + # Make executables depend on our current version. + verstring="$verstring:${current}.0" + ;; + + qnx) + major=".$current" + versuffix=".$current" + ;; + + sunos) + major=".$current" + versuffix=".$current.$revision" + ;; + + windows) + # Use '-' rather than '.', since we only want one + # extension on DOS 8.3 filesystems. + func_arith $current - $age + major=$func_arith_result + versuffix="-$major" + ;; + + *) + func_fatal_configuration "unknown library version type \`$version_type'" + ;; + esac + + # Clear the version info if we defaulted, and they specified a release. + if test -z "$vinfo" && test -n "$release"; then + major= + case $version_type in + darwin) + # we can't check for "0.0" in archive_cmds due to quoting + # problems, so we reset it completely + verstring= + ;; + *) + verstring="0.0" + ;; + esac + if test "$need_version" = no; then + versuffix= + else + versuffix=".0.0" + fi + fi + + # Remove version info from name if versioning should be avoided + if test "$avoid_version" = yes && test "$need_version" = no; then + major= + versuffix= + verstring="" + fi + + # Check to see if the archive will have undefined symbols. + if test "$allow_undefined" = yes; then + if test "$allow_undefined_flag" = unsupported; then + func_warning "undefined symbols not allowed in $host shared libraries" + build_libtool_libs=no + build_old_libs=yes + fi + else + # Don't allow undefined symbols. + allow_undefined_flag="$no_undefined_flag" + fi + + fi + + func_generate_dlsyms "$libname" "$libname" "yes" + libobjs="$libobjs $symfileobj" + test "X$libobjs" = "X " && libobjs= + + if test "$mode" != relink; then + # Remove our outputs, but don't remove object files since they + # may have been created when compiling PIC objects. + removelist= + tempremovelist=`$ECHO "$output_objdir/*"` + for p in $tempremovelist; do + case $p in + *.$objext | *.gcno) + ;; + $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) + if test "X$precious_files_regex" != "X"; then + if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 + then + continue + fi + fi + removelist="$removelist $p" + ;; + *) ;; + esac + done + test -n "$removelist" && \ + func_show_eval "${RM}r \$removelist" + fi + + # Now set the variables for building old libraries. + if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then + oldlibs="$oldlibs $output_objdir/$libname.$libext" + + # Transform .lo files to .o files. + oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` + fi + + # Eliminate all temporary directories. + #for path in $notinst_path; do + # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"` + # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"` + # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"` + #done + + if test -n "$xrpath"; then + # If the user specified any rpath flags, then add them. + temp_xrpath= + for libdir in $xrpath; do + temp_xrpath="$temp_xrpath -R$libdir" + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; + esac + done + if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then + dependency_libs="$temp_xrpath $dependency_libs" + fi + fi + + # Make sure dlfiles contains only unique files that won't be dlpreopened + old_dlfiles="$dlfiles" + dlfiles= + for lib in $old_dlfiles; do + case " $dlprefiles $dlfiles " in + *" $lib "*) ;; + *) dlfiles="$dlfiles $lib" ;; + esac + done + + # Make sure dlprefiles contains only unique files + old_dlprefiles="$dlprefiles" + dlprefiles= + for lib in $old_dlprefiles; do + case "$dlprefiles " in + *" $lib "*) ;; + *) dlprefiles="$dlprefiles $lib" ;; + esac + done + + if test "$build_libtool_libs" = yes; then + if test -n "$rpath"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*) + # these systems don't actually have a c library (as such)! + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C library is in the System framework + deplibs="$deplibs System.ltframework" + ;; + *-*-netbsd*) + # Don't link with libc until the a.out ld.so is fixed. + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + ;; + *) + # Add libc to deplibs on all other systems if necessary. + if test "$build_libtool_need_lc" = "yes"; then + deplibs="$deplibs -lc" + fi + ;; + esac + fi + + # Transform deplibs into only deplibs that can be linked in shared. + name_save=$name + libname_save=$libname + release_save=$release + versuffix_save=$versuffix + major_save=$major + # I'm not sure if I'm treating the release correctly. I think + # release should show up in the -l (ie -lgmp5) so we don't want to + # add it in twice. Is that correct? + release="" + versuffix="" + major="" + newdeplibs= + droppeddeps=no + case $deplibs_check_method in + pass_all) + # Don't check for shared/static. Everything works. + # This might be a little naive. We might want to check + # whether the library exists or not. But this is on + # osf3 & osf4 and I'm not really sure... Just + # implementing what was already the behavior. + newdeplibs=$deplibs + ;; + test_compile) + # This code stresses the "libraries are programs" paradigm to its + # limits. Maybe even breaks it. We compile a program, linking it + # against the deplibs as a proxy for the library. Then we can check + # whether they linked in statically or dynamically with ldd. + $opt_dry_run || $RM conftest.c + cat > conftest.c <<EOF + int main() { return 0; } +EOF + $opt_dry_run || $RM conftest + if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then + ldd_output=`ldd conftest` + for i in $deplibs; do + case $i in + -l*) + func_stripname -l '' "$i" + name=$func_stripname_result + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $i "*) + newdeplibs="$newdeplibs $i" + i="" + ;; + esac + fi + if test -n "$i" ; then + libname=`eval "\\$ECHO \"$libname_spec\""` + deplib_matches=`eval "\\$ECHO \"$library_names_spec\""` + set dummy $deplib_matches; shift + deplib_match=$1 + if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then + newdeplibs="$newdeplibs $i" + else + droppeddeps=yes + $ECHO + $ECHO "*** Warning: dynamic linker does not accept needed library $i." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which I believe you do not have" + $ECHO "*** because a test_compile did reveal that the linker did not use it for" + $ECHO "*** its dynamic dependency list that programs get resolved with at runtime." + fi + fi + ;; + *) + newdeplibs="$newdeplibs $i" + ;; + esac + done + else + # Error occurred in the first compile. Let's try to salvage + # the situation: Compile a separate program for each library. + for i in $deplibs; do + case $i in + -l*) + func_stripname -l '' "$i" + name=$func_stripname_result + $opt_dry_run || $RM conftest + if $LTCC $LTCFLAGS -o conftest conftest.c $i; then + ldd_output=`ldd conftest` + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $i "*) + newdeplibs="$newdeplibs $i" + i="" + ;; + esac + fi + if test -n "$i" ; then + libname=`eval "\\$ECHO \"$libname_spec\""` + deplib_matches=`eval "\\$ECHO \"$library_names_spec\""` + set dummy $deplib_matches; shift + deplib_match=$1 + if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then + newdeplibs="$newdeplibs $i" + else + droppeddeps=yes + $ECHO + $ECHO "*** Warning: dynamic linker does not accept needed library $i." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have" + $ECHO "*** because a test_compile did reveal that the linker did not use this one" + $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime." + fi + fi + else + droppeddeps=yes + $ECHO + $ECHO "*** Warning! Library $i is needed by this library but I was not able to" + $ECHO "*** make it link in! You will probably need to install it or some" + $ECHO "*** library that it depends on before this library will be fully" + $ECHO "*** functional. Installing it before continuing would be even better." + fi + ;; + *) + newdeplibs="$newdeplibs $i" + ;; + esac + done + fi + ;; + file_magic*) + set dummy $deplibs_check_method; shift + file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + for a_deplib in $deplibs; do + case $a_deplib in + -l*) + func_stripname -l '' "$a_deplib" + name=$func_stripname_result + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $a_deplib "*) + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + ;; + esac + fi + if test -n "$a_deplib" ; then + libname=`eval "\\$ECHO \"$libname_spec\""` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do + # Follow soft links. + if ls -lLd "$potent_lib" 2>/dev/null | + $GREP " -> " >/dev/null; then + continue + fi + # The statement above tries to avoid entering an + # endless loop below, in case of cyclic links. + # We might still enter an endless loop, since a link + # loop can be closed while we follow links, + # but so what? + potlib="$potent_lib" + while test -h "$potlib" 2>/dev/null; do + potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` + case $potliblink in + [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; + *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; + esac + done + if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | + $SED -e 10q | + $EGREP "$file_magic_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + $ECHO + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have" + $ECHO "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $ECHO "*** with $libname but no candidates were found. (...for file magic test)" + else + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a file magic. Last file checked: $potlib" + fi + fi + ;; + *) + # Add a -L argument. + newdeplibs="$newdeplibs $a_deplib" + ;; + esac + done # Gone through all deplibs. + ;; + match_pattern*) + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + for a_deplib in $deplibs; do + case $a_deplib in + -l*) + func_stripname -l '' "$a_deplib" + name=$func_stripname_result + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $a_deplib "*) + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + ;; + esac + fi + if test -n "$a_deplib" ; then + libname=`eval "\\$ECHO \"$libname_spec\""` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do + potlib="$potent_lib" # see symlink-check above in file_magic test + if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \ + $EGREP "$match_pattern_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + $ECHO + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have" + $ECHO "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" + else + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a regex pattern. Last file checked: $potlib" + fi + fi + ;; + *) + # Add a -L argument. + newdeplibs="$newdeplibs $a_deplib" + ;; + esac + done # Gone through all deplibs. + ;; + none | unknown | *) + newdeplibs="" + tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \ + -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'` + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + for i in $predeps $postdeps ; do + # can't use Xsed below, because $i might contain '/' + tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"` + done + fi + if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' | + $GREP . >/dev/null; then + $ECHO + if test "X$deplibs_check_method" = "Xnone"; then + $ECHO "*** Warning: inter-library dependencies are not supported in this platform." + else + $ECHO "*** Warning: inter-library dependencies are not known to be supported." + fi + $ECHO "*** All declared inter-library dependencies are being dropped." + droppeddeps=yes + fi + ;; + esac + versuffix=$versuffix_save + major=$major_save + release=$release_save + libname=$libname_save + name=$name_save + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library with the System framework + newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'` + ;; + esac + + if test "$droppeddeps" = yes; then + if test "$module" = yes; then + $ECHO + $ECHO "*** Warning: libtool could not satisfy all declared inter-library" + $ECHO "*** dependencies of module $libname. Therefore, libtool will create" + $ECHO "*** a static module, that should work as long as the dlopening" + $ECHO "*** application is linked with the -dlopen flag." + if test -z "$global_symbol_pipe"; then + $ECHO + $ECHO "*** However, this would only work if libtool was able to extract symbol" + $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" + $ECHO "*** not find such a program. So, this module is probably useless." + $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + else + $ECHO "*** The inter-library dependencies that have been dropped here will be" + $ECHO "*** automatically added whenever a program is linked with this library" + $ECHO "*** or is declared to -dlopen it." + + if test "$allow_undefined" = no; then + $ECHO + $ECHO "*** Since this library must not contain undefined symbols," + $ECHO "*** because either the platform does not support them or" + $ECHO "*** it was explicitly requested with -no-undefined," + $ECHO "*** libtool will only create a static version of it." + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + fi + fi + # Done checking deplibs! + deplibs=$newdeplibs + fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + case $host in + *-*-darwin*) + newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; + esac + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $deplibs " in + *" -L$path/$objdir "*) + new_libs="$new_libs -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$new_libs $deplib" ;; + esac + ;; + *) new_libs="$new_libs $deplib" ;; + esac + done + deplibs="$new_libs" + + # All the library-specific variables (install_libdir is set above). + library_names= + old_library= + dlname= + + # Test again, we may have decided not to build it any more + if test "$build_libtool_libs" = yes; then + if test "$hardcode_into_libs" = yes; then + # Hardcode the library paths + hardcode_libdirs= + dep_rpath= + rpath="$finalize_rpath" + test "$mode" != relink && rpath="$compile_rpath$rpath" + for libdir in $rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + dep_rpath="$dep_rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) perm_rpath="$perm_rpath $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + if test -n "$hardcode_libdir_flag_spec_ld"; then + eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" + else + eval dep_rpath=\"$hardcode_libdir_flag_spec\" + fi + fi + if test -n "$runpath_var" && test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + rpath="$rpath$dir:" + done + eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" + fi + test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" + fi + + shlibpath="$finalize_shlibpath" + test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" + if test -n "$shlibpath"; then + eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" + fi + + # Get the real and link names of the library. + eval shared_ext=\"$shrext_cmds\" + eval library_names=\"$library_names_spec\" + set dummy $library_names + shift + realname="$1" + shift + + if test -n "$soname_spec"; then + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + if test -z "$dlname"; then + dlname=$soname + fi + + lib="$output_objdir/$realname" + linknames= + for link + do + linknames="$linknames $link" + done + + # Use standard objects if they are pic + test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + test "X$libobjs" = "X " && libobjs= + + delfiles= + if test -n "$export_symbols" && test -n "$include_expsyms"; then + $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" + export_symbols="$output_objdir/$libname.uexp" + delfiles="$delfiles $export_symbols" + fi + + orig_export_symbols= + case $host_os in + cygwin* | mingw* | cegcc*) + if test -n "$export_symbols" && test -z "$export_symbols_regex"; then + # exporting using user supplied symfile + if test "x`$SED 1q $export_symbols`" != xEXPORTS; then + # and it's NOT already a .def file. Must figure out + # which of the given symbols are data symbols and tag + # them as such. So, trigger use of export_symbols_cmds. + # export_symbols gets reassigned inside the "prepare + # the list of exported symbols" if statement, so the + # include_expsyms logic still works. + orig_export_symbols="$export_symbols" + export_symbols= + always_export_symbols=yes + fi + fi + ;; + esac + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then + func_verbose "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $opt_dry_run || $RM $export_symbols + cmds=$export_symbols_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + func_len " $cmd" + len=$func_len_result + if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + func_show_eval "$cmd" 'exit $?' + skipped_export=false + else + # The command line is too long to execute in one step. + func_verbose "using reloadable object file for export list..." + skipped_export=: + # Break out early, otherwise skipped_export may be + # set to false by a later but shorter cmd. + break + fi + done + IFS="$save_ifs" + if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' + fi + fi + fi + + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols="$export_symbols" + test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' + fi + + if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi + + tmp_deplibs= + for test_deplib in $deplibs; do + case " $convenience " in + *" $test_deplib "*) ;; + *) + tmp_deplibs="$tmp_deplibs $test_deplib" + ;; + esac + done + deplibs="$tmp_deplibs" + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec" && + test "$compiler_needs_object" = yes && + test -z "$libobjs"; then + # extract the archives, so we have objects to list. + # TODO: could optimize this to just extract one archive. + whole_archive_flag_spec= + fi + if test -n "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= + else + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + + func_extract_archives $gentop $convenience + libobjs="$libobjs $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= + fi + fi + + if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then + eval flag=\"$thread_safe_flag_spec\" + linker_flags="$linker_flags $flag" + fi + + # Make a backup of the uninstalled library when relinking + if test "$mode" = relink; then + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? + fi + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + eval test_cmds=\"$module_expsym_cmds\" + cmds=$module_expsym_cmds + else + eval test_cmds=\"$module_cmds\" + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + eval test_cmds=\"$archive_expsym_cmds\" + cmds=$archive_expsym_cmds + else + eval test_cmds=\"$archive_cmds\" + cmds=$archive_cmds + fi + fi + + if test "X$skipped_export" != "X:" && + func_len " $test_cmds" && + len=$func_len_result && + test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + : + else + # The command line is too long to link in one step, link piecewise + # or, if using GNU ld and skipped_export is not :, use a linker + # script. + + # Save the value of $output and $libobjs because we want to + # use them later. If we have whole_archive_flag_spec, we + # want to use save_libobjs as it was before + # whole_archive_flag_spec was expanded, because we can't + # assume the linker understands whole_archive_flag_spec. + # This may have to be revisited, in case too many + # convenience libraries get linked in and end up exceeding + # the spec. + if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + fi + save_output=$output + output_la=`$ECHO "X$output" | $Xsed -e "$basename"` + + # Clear the reloadable object creation command queue and + # initialize k to one. + test_cmds= + concat_cmds= + objlist= + last_robj= + k=1 + + if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then + output=${output_objdir}/${output_la}.lnkscript + func_verbose "creating GNU ld script: $output" + $ECHO 'INPUT (' > $output + for obj in $save_libobjs + do + $ECHO "$obj" >> $output + done + $ECHO ')' >> $output + delfiles="$delfiles $output" + elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then + output=${output_objdir}/${output_la}.lnk + func_verbose "creating linker input file list: $output" + : > $output + set x $save_libobjs + shift + firstobj= + if test "$compiler_needs_object" = yes; then + firstobj="$1 " + shift + fi + for obj + do + $ECHO "$obj" >> $output + done + delfiles="$delfiles $output" + output=$firstobj\"$file_list_spec$output\" + else + if test -n "$save_libobjs"; then + func_verbose "creating reloadable object files..." + output=$output_objdir/$output_la-${k}.$objext + eval test_cmds=\"$reload_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 + + # Loop over the list of objects to be linked. + for obj in $save_libobjs + do + func_len " $obj" + func_arith $len + $func_len_result + len=$func_arith_result + if test "X$objlist" = X || + test "$len" -lt "$max_cmd_len"; then + func_append objlist " $obj" + else + # The command $test_cmds is almost too long, add a + # command to the queue. + if test "$k" -eq 1 ; then + # The first file doesn't have a previous command to add. + eval concat_cmds=\"$reload_cmds $objlist $last_robj\" + else + # All subsequent reloadable object files will link in + # the last one created. + eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\" + fi + last_robj=$output_objdir/$output_la-${k}.$objext + func_arith $k + 1 + k=$func_arith_result + output=$output_objdir/$output_la-${k}.$objext + objlist=$obj + func_len " $last_robj" + func_arith $len0 + $func_len_result + len=$func_arith_result + fi + done + # Handle the remaining objects by creating one last + # reloadable object file. All subsequent reloadable object + # files will link in the last one created. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" + if test -n "$last_robj"; then + eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" + fi + delfiles="$delfiles $output" + + else + output= + fi + + if ${skipped_export-false}; then + func_verbose "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $opt_dry_run || $RM $export_symbols + libobjs=$output + # Append the command to create the export file. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" + if test -n "$last_robj"; then + eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" + fi + fi + + test -n "$save_libobjs" && + func_verbose "creating a temporary reloadable object file: $output" + + # Loop through the commands generated above and execute them. + save_ifs="$IFS"; IFS='~' + for cmd in $concat_cmds; do + IFS="$save_ifs" + $opt_silent || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) + fi + + exit $lt_exit + } + done + IFS="$save_ifs" + + if test -n "$export_symbols_regex" && ${skipped_export-false}; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' + fi + fi + + if ${skipped_export-false}; then + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols="$export_symbols" + test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' + fi + + if test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi + fi + + libobjs=$output + # Restore the value of output. + output=$save_output + + if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= + fi + # Expand the library linking commands again to reset the + # value of $libobjs for piecewise linking. + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + cmds=$module_expsym_cmds + else + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + cmds=$archive_expsym_cmds + else + cmds=$archive_cmds + fi + fi + fi + + if test -n "$delfiles"; then + # Append the command to remove temporary files to $cmds. + eval cmds=\"\$cmds~\$RM $delfiles\" + fi + + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + + func_extract_archives $gentop $dlprefiles + libobjs="$libobjs $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= + fi + + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $opt_silent || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) + fi + + exit $lt_exit + } + done + IFS="$save_ifs" + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? + + if test -n "$convenience"; then + if test -z "$whole_archive_flag_spec"; then + func_show_eval '${RM}r "$gentop"' + fi + fi + + exit $EXIT_SUCCESS + fi + + # Create links to the real library. + for linkname in $linknames; do + if test "$realname" != "$linkname"; then + func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' + fi + done + + # If -module or -export-dynamic was specified, set the dlname. + if test "$module" = yes || test "$export_dynamic" = yes; then + # On all known operating systems, these are identical. + dlname="$soname" + fi + fi + ;; + + obj) + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + func_warning "\`-dlopen' is ignored for objects" + fi + + case " $deplibs" in + *\ -l* | *\ -L*) + func_warning "\`-l' and \`-L' are ignored for objects" ;; + esac + + test -n "$rpath" && \ + func_warning "\`-rpath' is ignored for objects" + + test -n "$xrpath" && \ + func_warning "\`-R' is ignored for objects" + + test -n "$vinfo" && \ + func_warning "\`-version-info' is ignored for objects" + + test -n "$release" && \ + func_warning "\`-release' is ignored for objects" + + case $output in + *.lo) + test -n "$objs$old_deplibs" && \ + func_fatal_error "cannot build library object \`$output' from non-libtool objects" + + libobj=$output + func_lo2o "$libobj" + obj=$func_lo2o_result + ;; + *) + libobj= + obj="$output" + ;; + esac + + # Delete the old objects. + $opt_dry_run || $RM $obj $libobj + + # Objects from convenience libraries. This assumes + # single-version convenience libraries. Whenever we create + # different ones for PIC/non-PIC, this we'll have to duplicate + # the extraction. + reload_conv_objs= + gentop= + # reload_cmds runs $LD directly, so let us get rid of + # -Wl from whole_archive_flag_spec and hope we can get by with + # turning comma into space.. + wl= + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then + eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" + reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` + else + gentop="$output_objdir/${obj}x" + generated="$generated $gentop" + + func_extract_archives $gentop $convenience + reload_conv_objs="$reload_objs $func_extract_archives_result" + fi + fi + + # Create the old-style object. + reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + + output="$obj" + func_execute_cmds "$reload_cmds" 'exit $?' + + # Exit if we aren't doing a library object file. + if test -z "$libobj"; then + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + exit $EXIT_SUCCESS + fi + + if test "$build_libtool_libs" != yes; then + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + # Create an invalid libtool object if no PIC, so that we don't + # accidentally link it into a program. + # $show "echo timestamp > $libobj" + # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? + exit $EXIT_SUCCESS + fi + + if test -n "$pic_flag" || test "$pic_mode" != default; then + # Only do commands if we really have different PIC objects. + reload_objs="$libobjs $reload_conv_objs" + output="$libobj" + func_execute_cmds "$reload_cmds" 'exit $?' + fi + + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + exit $EXIT_SUCCESS + ;; + + prog) + case $host in + *cygwin*) func_stripname '' '.exe' "$output" + output=$func_stripname_result.exe;; + esac + test -n "$vinfo" && \ + func_warning "\`-version-info' is ignored for programs" + + test -n "$release" && \ + func_warning "\`-release' is ignored for programs" + + test "$preload" = yes \ + && test "$dlopen_support" = unknown \ + && test "$dlopen_self" = unknown \ + && test "$dlopen_self_static" = unknown && \ + func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` + finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` + ;; + esac + + case $host in + *-*-darwin*) + # Don't allow lazy linking, it breaks C++ global constructors + # But is supposedly fixed on 10.4 or later (yay!). + if test "$tagname" = CXX ; then + case ${MACOSX_DEPLOYMENT_TARGET-10.0} in + 10.[0123]) + compile_command="$compile_command ${wl}-bind_at_load" + finalize_command="$finalize_command ${wl}-bind_at_load" + ;; + esac + fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; + esac + + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $compile_deplibs " in + *" -L$path/$objdir "*) + new_libs="$new_libs -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $compile_deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$new_libs $deplib" ;; + esac + ;; + *) new_libs="$new_libs $deplib" ;; + esac + done + compile_deplibs="$new_libs" + + + compile_command="$compile_command $compile_deplibs" + finalize_command="$finalize_command $finalize_deplibs" + + if test -n "$rpath$xrpath"; then + # If the user specified any rpath flags, then add them. + for libdir in $rpath $xrpath; do + # This is the magic to use -rpath. + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; + esac + done + fi + + # Now hardcode the library paths + rpath= + hardcode_libdirs= + for libdir in $compile_rpath $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + rpath="$rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) perm_rpath="$perm_rpath $libdir" ;; + esac + fi + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$libdir:"*) ;; + ::) dllsearchpath=$libdir;; + *) dllsearchpath="$dllsearchpath:$libdir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + ::) dllsearchpath=$testbindir;; + *) dllsearchpath="$dllsearchpath:$testbindir";; + esac + ;; + esac + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + compile_rpath="$rpath" + + rpath= + hardcode_libdirs= + for libdir in $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + rpath="$rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$finalize_perm_rpath " in + *" $libdir "*) ;; + *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + finalize_rpath="$rpath" + + if test -n "$libobjs" && test "$build_old_libs" = yes; then + # Transform all the library objects into standard objects. + compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + fi + + func_generate_dlsyms "$outputname" "@PROGRAM@" "no" + + # template prelinking step + if test -n "$prelink_cmds"; then + func_execute_cmds "$prelink_cmds" 'exit $?' + fi + + wrappers_required=yes + case $host in + *cygwin* | *mingw* ) + if test "$build_libtool_libs" != yes; then + wrappers_required=no + fi + ;; + *cegcc) + # Disable wrappers for cegcc, we are cross compiling anyway. + wrappers_required=no + ;; + *) + if test "$need_relink" = no || test "$build_libtool_libs" != yes; then + wrappers_required=no + fi + ;; + esac + if test "$wrappers_required" = no; then + # Replace the output file specification. + compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + link_command="$compile_command$compile_rpath" + + # We have no uninstalled library dependencies, so finalize right now. + exit_status=0 + func_show_eval "$link_command" 'exit_status=$?' + + # Delete the generated files. + if test -f "$output_objdir/${outputname}S.${objext}"; then + func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' + fi + + exit $exit_status + fi + + if test -n "$compile_shlibpath$finalize_shlibpath"; then + compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" + fi + if test -n "$finalize_shlibpath"; then + finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" + fi + + compile_var= + finalize_var= + if test -n "$runpath_var"; then + if test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + rpath="$rpath$dir:" + done + compile_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + if test -n "$finalize_perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $finalize_perm_rpath; do + rpath="$rpath$dir:" + done + finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + fi + + if test "$no_install" = yes; then + # We don't need to create a wrapper script. + link_command="$compile_var$compile_command$compile_rpath" + # Replace the output file specification. + link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + # Delete the old output file. + $opt_dry_run || $RM $output + # Link the executable and exit + func_show_eval "$link_command" 'exit $?' + exit $EXIT_SUCCESS + fi + + if test "$hardcode_action" = relink; then + # Fast installation is not supported + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + + func_warning "this platform does not like uninstalled shared libraries" + func_warning "\`$output' will be relinked during installation" + else + if test "$fast_install" != no; then + link_command="$finalize_var$compile_command$finalize_rpath" + if test "$fast_install" = yes; then + relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` + else + # fast_install is set to needless + relink_command= + fi + else + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + fi + fi + + # Replace the output file specification. + link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + + # Delete the old output files. + $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname + + func_show_eval "$link_command" 'exit $?' + + # Now create the wrapper script. + func_verbose "creating $output" + + # Quote the relink command for shipping. + if test -n "$relink_command"; then + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi + done + relink_command="(cd `pwd`; $relink_command)" + relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` + fi + + # Quote $ECHO for shipping. + if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then + case $progpath in + [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; + *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; + esac + qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"` + else + qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"` + fi + + # Only actually do things if not in dry run mode. + $opt_dry_run || { + # win32 will think the script is a binary if it has + # a .exe suffix, so we strip it off here. + case $output in + *.exe) func_stripname '' '.exe' "$output" + output=$func_stripname_result ;; + esac + # test for cygwin because mv fails w/o .exe extensions + case $host in + *cygwin*) + exeext=.exe + func_stripname '' '.exe' "$outputname" + outputname=$func_stripname_result ;; + *) exeext= ;; + esac + case $host in + *cygwin* | *mingw* ) + func_dirname_and_basename "$output" "" "." + output_name=$func_basename_result + output_path=$func_dirname_result + cwrappersource="$output_path/$objdir/lt-$output_name.c" + cwrapper="$output_path/$output_name.exe" + $RM $cwrappersource $cwrapper + trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 + + func_emit_cwrapperexe_src > $cwrappersource + + # The wrapper executable is built using the $host compiler, + # because it contains $host paths and files. If cross- + # compiling, it, like the target executable, must be + # executed on the $host or under an emulation environment. + $opt_dry_run || { + $LTCC $LTCFLAGS -o $cwrapper $cwrappersource + $STRIP $cwrapper + } + + # Now, create the wrapper script for func_source use: + func_ltwrapper_scriptname $cwrapper + $RM $func_ltwrapper_scriptname_result + trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 + $opt_dry_run || { + # note: this script will not be executed, so do not chmod. + if test "x$build" = "x$host" ; then + $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result + else + func_emit_wrapper no > $func_ltwrapper_scriptname_result + fi + } + ;; + * ) + $RM $output + trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 + + func_emit_wrapper no > $output + chmod +x $output + ;; + esac + } + exit $EXIT_SUCCESS + ;; + esac + + # See if we need to build an old-fashioned archive. + for oldlib in $oldlibs; do + + if test "$build_libtool_libs" = convenience; then + oldobjs="$libobjs_save $symfileobj" + addlibs="$convenience" + build_libtool_libs=no + else + if test "$build_libtool_libs" = module; then + oldobjs="$libobjs_save" + build_libtool_libs=no + else + oldobjs="$old_deplibs $non_pic_objects" + if test "$preload" = yes && test -f "$symfileobj"; then + oldobjs="$oldobjs $symfileobj" + fi + fi + addlibs="$old_convenience" + fi + + if test -n "$addlibs"; then + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + + func_extract_archives $gentop $addlibs + oldobjs="$oldobjs $func_extract_archives_result" + fi + + # Do each command in the archive commands. + if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then + cmds=$old_archive_from_new_cmds + else + + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + + func_extract_archives $gentop $dlprefiles + oldobjs="$oldobjs $func_extract_archives_result" + fi + + # POSIX demands no paths to be encoded in archives. We have + # to avoid creating archives with duplicate basenames if we + # might have to extract them afterwards, e.g., when creating a + # static archive out of a convenience library, or when linking + # the entirety of a libtool archive into another (currently + # not supported by libtool). + if (for obj in $oldobjs + do + func_basename "$obj" + $ECHO "$func_basename_result" + done | sort | sort -uc >/dev/null 2>&1); then + : + else + $ECHO "copying selected object files to avoid basename conflicts..." + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + func_mkdir_p "$gentop" + save_oldobjs=$oldobjs + oldobjs= + counter=1 + for obj in $save_oldobjs + do + func_basename "$obj" + objbase="$func_basename_result" + case " $oldobjs " in + " ") oldobjs=$obj ;; + *[\ /]"$objbase "*) + while :; do + # Make sure we don't pick an alternate name that also + # overlaps. + newobj=lt$counter-$objbase + func_arith $counter + 1 + counter=$func_arith_result + case " $oldobjs " in + *[\ /]"$newobj "*) ;; + *) if test ! -f "$gentop/$newobj"; then break; fi ;; + esac + done + func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" + oldobjs="$oldobjs $gentop/$newobj" + ;; + *) oldobjs="$oldobjs $obj" ;; + esac + done + fi + eval cmds=\"$old_archive_cmds\" + + func_len " $cmds" + len=$func_len_result + if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + cmds=$old_archive_cmds + else + # the command line is too long to link in one step, link in parts + func_verbose "using piecewise archive linking..." + save_RANLIB=$RANLIB + RANLIB=: + objlist= + concat_cmds= + save_oldobjs=$oldobjs + oldobjs= + # Is there a better way of finding the last object in the list? + for obj in $save_oldobjs + do + last_oldobj=$obj + done + eval test_cmds=\"$old_archive_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 + for obj in $save_oldobjs + do + func_len " $obj" + func_arith $len + $func_len_result + len=$func_arith_result + func_append objlist " $obj" + if test "$len" -lt "$max_cmd_len"; then + : + else + # the above command should be used before it gets too long + oldobjs=$objlist + if test "$obj" = "$last_oldobj" ; then + RANLIB=$save_RANLIB + fi + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" + objlist= + len=$len0 + fi + done + RANLIB=$save_RANLIB + oldobjs=$objlist + if test "X$oldobjs" = "X" ; then + eval cmds=\"\$concat_cmds\" + else + eval cmds=\"\$concat_cmds~\$old_archive_cmds\" + fi + fi + fi + func_execute_cmds "$cmds" 'exit $?' + done + + test -n "$generated" && \ + func_show_eval "${RM}r$generated" + + # Now create the libtool archive. + case $output in + *.la) + old_library= + test "$build_old_libs" = yes && old_library="$libname.$libext" + func_verbose "creating $output" + + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi + done + # Quote the link command for shipping. + relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" + relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` + if test "$hardcode_automatic" = yes ; then + relink_command= + fi + + # Only create the output if not a dry run. + $opt_dry_run || { + for installed in no yes; do + if test "$installed" = yes; then + if test -z "$install_libdir"; then + break + fi + output="$output_objdir/$outputname"i + # Replace all uninstalled libtool libraries with the installed ones + newdependency_libs= + for deplib in $dependency_libs; do + case $deplib in + *.la) + func_basename "$deplib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" + newdependency_libs="$newdependency_libs $libdir/$name" + ;; + *) newdependency_libs="$newdependency_libs $deplib" ;; + esac + done + dependency_libs="$newdependency_libs" + newdlfiles= + + for lib in $dlfiles; do + case $lib in + *.la) + func_basename "$lib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "\`$lib' is not a valid libtool archive" + newdlfiles="$newdlfiles $libdir/$name" + ;; + *) newdlfiles="$newdlfiles $lib" ;; + esac + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + *.la) + # Only pass preopened files to the pseudo-archive (for + # eventual linking with the app. that links it) if we + # didn't already link the preopened objects directly into + # the library: + func_basename "$lib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "\`$lib' is not a valid libtool archive" + newdlprefiles="$newdlprefiles $libdir/$name" + ;; + esac + done + dlprefiles="$newdlprefiles" + else + newdlfiles= + for lib in $dlfiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + newdlfiles="$newdlfiles $abs" + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + newdlprefiles="$newdlprefiles $abs" + done + dlprefiles="$newdlprefiles" + fi + $RM $output + # place dlname in correct position for cygwin + tdlname=$dlname + case $host,$output,$installed,$module,$dlname in + *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; + esac + $ECHO > $output "\ +# $outputname - a libtool library file +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# +# Please DO NOT delete this file! +# It is necessary for linking the library. + +# The name that we can dlopen(3). +dlname='$tdlname' + +# Names of this library. +library_names='$library_names' + +# The name of the static archive. +old_library='$old_library' + +# Linker flags that can not go in dependency_libs. +inherited_linker_flags='$new_inherited_linker_flags' + +# Libraries that this one depends upon. +dependency_libs='$dependency_libs' + +# Names of additional weak libraries provided by this library +weak_library_names='$weak_libs' + +# Version information for $libname. +current=$current +age=$age +revision=$revision + +# Is this an already installed library? +installed=$installed + +# Should we warn about portability when linking against -modules? +shouldnotlink=$module + +# Files to dlopen/dlpreopen +dlopen='$dlfiles' +dlpreopen='$dlprefiles' + +# Directory that this library needs to be installed in: +libdir='$install_libdir'" + if test "$installed" = no && test "$need_relink" = yes; then + $ECHO >> $output "\ +relink_command=\"$relink_command\"" + fi + done + } + + # Do a symbolic link so that the libtool archive can be found in + # LD_LIBRARY_PATH before the program is installed. + func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' + ;; + esac + exit $EXIT_SUCCESS +} + +{ test "$mode" = link || test "$mode" = relink; } && + func_mode_link ${1+"$@"} + + +# func_mode_uninstall arg... +func_mode_uninstall () +{ + $opt_debug + RM="$nonopt" + files= + rmforce= + exit_status=0 + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + for arg + do + case $arg in + -f) RM="$RM $arg"; rmforce=yes ;; + -*) RM="$RM $arg" ;; + *) files="$files $arg" ;; + esac + done + + test -z "$RM" && \ + func_fatal_help "you must specify an RM program" + + rmdirs= + + origobjdir="$objdir" + for file in $files; do + func_dirname "$file" "" "." + dir="$func_dirname_result" + if test "X$dir" = X.; then + objdir="$origobjdir" + else + objdir="$dir/$origobjdir" + fi + func_basename "$file" + name="$func_basename_result" + test "$mode" = uninstall && objdir="$dir" + + # Remember objdir for removal later, being careful to avoid duplicates + if test "$mode" = clean; then + case " $rmdirs " in + *" $objdir "*) ;; + *) rmdirs="$rmdirs $objdir" ;; + esac + fi + + # Don't error if the file doesn't exist and rm -f was used. + if { test -L "$file"; } >/dev/null 2>&1 || + { test -h "$file"; } >/dev/null 2>&1 || + test -f "$file"; then + : + elif test -d "$file"; then + exit_status=1 + continue + elif test "$rmforce" = yes; then + continue + fi + + rmfiles="$file" + + case $name in + *.la) + # Possibly a libtool archive, so verify it. + if func_lalib_p "$file"; then + func_source $dir/$name + + # Delete the libtool libraries and symlinks. + for n in $library_names; do + rmfiles="$rmfiles $objdir/$n" + done + test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" + + case "$mode" in + clean) + case " $library_names " in + # " " in the beginning catches empty $dlname + *" $dlname "*) ;; + *) rmfiles="$rmfiles $objdir/$dlname" ;; + esac + test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" + ;; + uninstall) + if test -n "$library_names"; then + # Do each command in the postuninstall commands. + func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + fi + + if test -n "$old_library"; then + # Do each command in the old_postuninstall commands. + func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + fi + # FIXME: should reinstall the best remaining shared library. + ;; + esac + fi + ;; + + *.lo) + # Possibly a libtool object, so verify it. + if func_lalib_p "$file"; then + + # Read the .lo file + func_source $dir/$name + + # Add PIC object to the list of files to remove. + if test -n "$pic_object" && + test "$pic_object" != none; then + rmfiles="$rmfiles $dir/$pic_object" + fi + + # Add non-PIC object to the list of files to remove. + if test -n "$non_pic_object" && + test "$non_pic_object" != none; then + rmfiles="$rmfiles $dir/$non_pic_object" + fi + fi + ;; + + *) + if test "$mode" = clean ; then + noexename=$name + case $file in + *.exe) + func_stripname '' '.exe' "$file" + file=$func_stripname_result + func_stripname '' '.exe' "$name" + noexename=$func_stripname_result + # $file with .exe has already been added to rmfiles, + # add $file without .exe + rmfiles="$rmfiles $file" + ;; + esac + # Do a test to see if this is a libtool program. + if func_ltwrapper_p "$file"; then + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + relink_command= + func_source $func_ltwrapper_scriptname_result + rmfiles="$rmfiles $func_ltwrapper_scriptname_result" + else + relink_command= + func_source $dir/$noexename + fi + + # note $name still contains .exe if it was in $file originally + # as does the version of $file that was added into $rmfiles + rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" + if test "$fast_install" = yes && test -n "$relink_command"; then + rmfiles="$rmfiles $objdir/lt-$name" + fi + if test "X$noexename" != "X$name" ; then + rmfiles="$rmfiles $objdir/lt-${noexename}.c" + fi + fi + fi + ;; + esac + func_show_eval "$RM $rmfiles" 'exit_status=1' + done + objdir="$origobjdir" + + # Try to remove the ${objdir}s in the directories where we deleted files + for dir in $rmdirs; do + if test -d "$dir"; then + func_show_eval "rmdir $dir >/dev/null 2>&1" + fi + done + + exit $exit_status +} + +{ test "$mode" = uninstall || test "$mode" = clean; } && + func_mode_uninstall ${1+"$@"} + +test -z "$mode" && { + help="$generic_help" + func_fatal_help "you must specify a MODE" +} + +test -z "$exec_cmd" && \ + func_fatal_help "invalid operation mode \`$mode'" + +if test -n "$exec_cmd"; then + eval exec "$exec_cmd" + exit $EXIT_FAILURE +fi + +exit $exit_status + + +# The TAGs below are defined such that we never get into a situation +# in which we disable both kinds of libraries. Given conflicting +# choices, we go for a static library, that is the most portable, +# since we can't tell whether shared libraries were disabled because +# the user asked for that or because the platform doesn't support +# them. This is particularly important on AIX, because we don't +# support having both static and shared libraries enabled at the same +# time on that platform, so we default to a shared-only configuration. +# If a disable-shared tag is given, we'll fallback to a static-only +# configuration. But we'll never go from static-only to shared-only. + +# ### BEGIN LIBTOOL TAG CONFIG: disable-shared +build_libtool_libs=no +build_old_libs=yes +# ### END LIBTOOL TAG CONFIG: disable-shared + +# ### BEGIN LIBTOOL TAG CONFIG: disable-static +build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` +# ### END LIBTOOL TAG CONFIG: disable-static + +# Local Variables: +# mode:shell-script +# sh-indentation:2 +# End: +# vi:sw=2 + |