diff options
Diffstat (limited to 'nping/docs/nping-usage.txt')
-rw-r--r-- | nping/docs/nping-usage.txt | 120 |
1 files changed, 120 insertions, 0 deletions
diff --git a/nping/docs/nping-usage.txt b/nping/docs/nping-usage.txt new file mode 100644 index 0000000..3e0cfca --- /dev/null +++ b/nping/docs/nping-usage.txt @@ -0,0 +1,120 @@ +Nping 0.7.92SVN ( https://nmap.org/nping ) +Usage: nping [Probe mode] [Options] {target specification} + +TARGET SPECIFICATION: + Targets may be specified as hostnames, IP addresses, networks, etc. + Ex: scanme.nmap.org, microsoft.com/24, 192.168.0.1; 10.0.*.1-24 +PROBE MODES: + --tcp-connect : Unprivileged TCP connect probe mode. + --tcp : TCP probe mode. + --udp : UDP probe mode. + --icmp : ICMP probe mode. + --arp : ARP/RARP probe mode. + --tr, --traceroute : Traceroute mode (can only be used with + TCP/UDP/ICMP modes). +TCP CONNECT MODE: + -p, --dest-port <port spec> : Set destination port(s). + -g, --source-port <portnumber> : Try to use a custom source port. +TCP PROBE MODE: + -g, --source-port <portnumber> : Set source port. + -p, --dest-port <port spec> : Set destination port(s). + --seq <seqnumber> : Set sequence number. + --flags <flag list> : Set TCP flags (ACK,PSH,RST,SYN,FIN...) + --ack <acknumber> : Set ACK number. + --win <size> : Set window size. + --badsum : Use a random invalid checksum. +UDP PROBE MODE: + -g, --source-port <portnumber> : Set source port. + -p, --dest-port <port spec> : Set destination port(s). + --badsum : Use a random invalid checksum. +ICMP PROBE MODE: + --icmp-type <type> : ICMP type. + --icmp-code <code> : ICMP code. + --icmp-id <id> : Set identifier. + --icmp-seq <n> : Set sequence number. + --icmp-redirect-addr <addr> : Set redirect address. + --icmp-param-pointer <pnt> : Set parameter problem pointer. + --icmp-advert-lifetime <time> : Set router advertisement lifetime. + --icmp-advert-entry <IP,pref> : Add router advertisement entry. + --icmp-orig-time <timestamp> : Set originate timestamp. + --icmp-recv-time <timestamp> : Set receive timestamp. + --icmp-trans-time <timestamp> : Set transmit timestamp. +ARP/RARP PROBE MODE: + --arp-type <type> : Type: ARP, ARP-reply, RARP, RARP-reply. + --arp-sender-mac <mac> : Set sender MAC address. + --arp-sender-ip <addr> : Set sender IP address. + --arp-target-mac <mac> : Set target MAC address. + --arp-target-ip <addr> : Set target IP address. +IPv4 OPTIONS: + -S, --source-ip : Set source IP address. + --dest-ip <addr> : Set destination IP address (used as an + alternative to {target specification} ). + --tos <tos> : Set type of service field (8bits). + --id <id> : Set identification field (16 bits). + --df : Set Don't Fragment flag. + --mf : Set More Fragments flag. + --evil : Set Reserved / Evil flag. + --ttl <hops> : Set time to live [0-255]. + --badsum-ip : Use a random invalid checksum. + --ip-options <S|R [route]|L [route]|T|U ...> : Set IP options + --ip-options <hex string> : Set IP options + --mtu <size> : Set MTU. Packets get fragmented if MTU is + small enough. +IPv6 OPTIONS: + -6, --IPv6 : Use IP version 6. + --dest-ip : Set destination IP address (used as an + alternative to {target specification}). + --hop-limit : Set hop limit (same as IPv4 TTL). + --traffic-class <class> : : Set traffic class. + --flow <label> : Set flow label. +ETHERNET OPTIONS: + --dest-mac <mac> : Set destination mac address. (Disables + ARP resolution) + --source-mac <mac> : Set source MAC address. + --ether-type <type> : Set EtherType value. +PAYLOAD OPTIONS: + --data <hex string> : Include a custom payload. + --data-string <text> : Include a custom ASCII text. + --data-length <len> : Include len random bytes as payload. +ECHO CLIENT/SERVER: + --echo-client <passphrase> : Run Nping in client mode. + --echo-server <passphrase> : Run Nping in server mode. + --echo-port <port> : Use custom <port> to listen or connect. + --no-crypto : Disable encryption and authentication. + --once : Stop the server after one connection. + --safe-payloads : Erase application data in echoed packets. +TIMING AND PERFORMANCE: + Options which take <time> are in seconds, or append 'ms' (milliseconds), + 's' (seconds), 'm' (minutes), or 'h' (hours) to the value (e.g. 30m, 0.25h). + --delay <time> : Adjust delay between probes. + --rate <rate> : Send num packets per second. +MISC: + -h, --help : Display help information. + -V, --version : Display current version number. + -c, --count <n> : Stop after <n> rounds. + -e, --interface <name> : Use supplied network interface. + -H, --hide-sent : Do not display sent packets. + -N, --no-capture : Do not try to capture replies. + --privileged : Assume user is fully privileged. + --unprivileged : Assume user lacks raw socket privileges. + --send-eth : Send packets at the raw Ethernet layer. + --send-ip : Send packets using raw IP sockets. + --bpf-filter <filter spec> : Specify custom BPF filter. +OUTPUT: + -v : Increment verbosity level by one. + -v[level] : Set verbosity level. E.g: -v4 + -d : Increment debugging level by one. + -d[level] : Set debugging level. E.g: -d3 + -q : Decrease verbosity level by one. + -q[N] : Decrease verbosity level N times + --quiet : Set verbosity and debug level to minimum. + --debug : Set verbosity and debug to the max level. +EXAMPLES: + nping scanme.nmap.org + nping --tcp -p 80 --flags rst --ttl 2 192.168.1.1 + nping --icmp --icmp-type time --delay 500ms 192.168.254.254 + nping --echo-server "public" -e wlan0 -vvv + nping --echo-client "public" echo.nmap.org --tcp -p1-1024 --flags ack + +SEE THE MAN PAGE FOR MANY MORE OPTIONS, DESCRIPTIONS, AND EXAMPLES + |