diff options
Diffstat (limited to '')
| -rw-r--r-- | nping/nping-dev/NpingCommandLine.txt | 151 |
1 files changed, 151 insertions, 0 deletions
diff --git a/nping/nping-dev/NpingCommandLine.txt b/nping/nping-dev/NpingCommandLine.txt new file mode 100644 index 0000000..df4175d --- /dev/null +++ b/nping/nping-dev/NpingCommandLine.txt @@ -0,0 +1,151 @@ +++++++++++++++++++++++++++++++++++ +| NPING COMMAND LINE INTERFACE | +++++++++++++++++++++++++++++++++++ + +This document presents Nping's command line interface. All option flags are +now definitive. Howerever, comments and suggestions are still welcome. + + + +Nping 0.01a ( https://nmap.org/nping ) +Usage: nping [Probe mode] [Options] {target specification} + +TARGET SPECIFICATION: + Targets may be specified as hostnames, IP addresses, networks, etc. + Ex: scanme.nmap.org, microsoft.com/24, 192.168.0.1; 10.0.0-255.1-254 + -iL <inputfilename>: Read targets from list of hosts or networks +PROBE MODES: + --tcp-connect : Unprivileged TCP connect probe mode. + --tcp : TCP probe mode. + --upd : UPD probe mode. + --icmp : ICMP probe mode. + --arp : ARP Request probe mode. + --rarp : RARP Request probe mode. + --arp-response : ARP Response probe mode. + --rarp-response : RARP Response probe mode. + -tr, --traceroute : Traceroute mode (can be used together with TCP/UDP/ICMP + pings, but not with ARP ping) +TCP PROBE MODE: + -g, --source-port <portnumber> : Set source port. + -p, --dest-port <portnumber> : Set destination port. + --seq <seqnumber> : Set sequence number. + --flags <flags> : Set TCP flags. + --ack <acknumber> : Set ACK number. + --win <size> : Set window size. + --badsum : Use a random invalid checksum. + --mss <size> : Set maximum segment size. + --ws <n> : Set window scale. + --ts <echo,reply> : Set timestamp (echo and reply fields). +UDP PROBE MODE: + -g, --source-port <portnumber> : Set source port. + -p, --dest-port <portnumber> : Set destination port. + --badsum : Use a random invalid checksum. +ICMP PROBE MODE: + -I3, --dest-unr : Send "destination unreacheable" messages. + -I8, --echo-req : Send "echo request" messages. + -I13, --ts-req : Send "timestamp request" messages. + -I15, --info-req : Send "Information request" messages. + -I17, --netmask-req : Send "Netmask request" messages. + --icmp-code <code> : ICMP code. + --icmp-id <id> : Sets field "Identifier" in echo messages (16bits). + --icmp-seq <n> : Sets field "Sequence number" in echo messages (16 bits). +ARP/RARP PROBE MODE: + --arp-sender-mac <mac> : Set sender MAC address. + --arp-sender-ip <ip> : Set sender IP address. + --arp-target-mac <mac> : Set target MAC address. + --arp-target-ip <ip> : Set target IP address. +ETHERNET OPTIONS: + --dest-mac : Set destination mac address. This disables ARP resolution. + --source-mac : Set source MAC address. +IP OPTIONS: + -S, --source-ip : Set source IP address. + --dest-ip : Set destination IP address (used as an alternative to + {target specification} ). + --tos <val> : Set type of service field (8bits). + --id <val> : Set identification field (16 bits). + --df : Set Don't Fragment flag. + --mf : Set More Fragments flag. + --ttl <val> : Set time to live [0-256]. + --badsum-ip : Use a random invalid checksum. + --ip-options S|R [route]|L [route]|T|U ... : Set IP options + --ip-options hex string : Set IP options + --mtu <len> : Set MTU. Packets get fragmented if MTU is small enough. + -f : Fragment packets. +PAYLOAD OPTIONS: + --data <hex string> : Include TCP/UPD/ICMP payload (if it makes sense). + --data-file <filename> : Get payload from specified file. + --data-length <len> : Include len random bytes as payload. +ECHO CLIENT/SERVER: + -K, --ekey <hex> : Key to be used for encryption/decryption. + -P, --passphrase : Passphrase to derive an encryption key from. + CLIENT-ONLY OPTIONS: + --client : Run Nping in client mode. + --interpret : Interpret received echoes. + SERVER-ONLY OPTIONS: + --server : Run Nping in server mode. + --echo-link : Return back: link+net+transport+payload + --echo-net : Return back: net+transport+payload + --echo-trans : Return back: transport+payload + --echo-data : Just return payload. +TIMING AND PERFORMANCE: + Options which take <time> are in milliseconds, unless you append 's' + (seconds), 'm' (minutes), or 'h' (hours) to the value (e.g. 30m). + --delay <time> : Adjust delay between probes. + --rate <num> : Send num packets per second. + --host-timeout <time> : Give up on target after this long. +MISC: + -h, --help : Display help information on stardard output. + -V, --version : Display Nping current version number. + -c, --count <n> : Stop after sending (and receiving) n response packets. + -e, --interface <name> : Use supplied network interface. + --privileged : Assume that the user is fully privileged. + --unprivileged : Assume the user lacks raw socket privileges. + --send-eth : Send packets at the raw ethernet layer. + --send-ip : Send packets using raw IP sockets. +OUTPUT: + -v : Increment verbosity level by one. + -v[level] : Set verbosity level. E.g: -v4 + -d : Increment debugging level by one. + -d[level] : Set debugging level. E.g: -d3 + --quiet : Sets verbosity and debug level to zero. (Same as -v0 -d0) + --debug : Sets verbosity and debug to their highest level. +EXAMPLES: + nping scanme.nmap.org + nping --tcp --dest-port 80 --ttl 2 192.168.1.1 + nping --debug --icmp -I17 --delay 2s microsoft.com + +SEE THE MAN PAGE FOR MANY MORE OPTIONS, DESCRIPTIONS, AND EXAMPLES + + + + + + + ++------------------------------------------------------------------------------+ + +NOTES: + +In places where a port number, an IP address, etc, is expected, it is possible +to specify the word "rand" or "random", so Nping sets a random value for that +option. + +E.g: nping --tcp --dest-port random 192.168.1.1 + nping --udp --source-port random --source-mac random 207.46.197.32 + nping --arp --sender-ip random --ttl random scanme.nmap.org + + +In places where a MAC address is expected, it is possible to especify a MAC +address, a prefix or a vendor name. Missing information will be completed with +random values. + ++------------------------------------------------------------------------------+ + + + + + + + + + |