diff options
Diffstat (limited to 'Documentation/nvme-security-recv.txt')
-rw-r--r-- | Documentation/nvme-security-recv.txt | 89 |
1 files changed, 89 insertions, 0 deletions
diff --git a/Documentation/nvme-security-recv.txt b/Documentation/nvme-security-recv.txt new file mode 100644 index 0000000..ef77531 --- /dev/null +++ b/Documentation/nvme-security-recv.txt @@ -0,0 +1,89 @@ +nvme-security-recv(1) +===================== + +NAME +---- +nvme-security-recv - Security Recv command + +SYNOPSIS +-------- +[verse] +'nvme security-recv' <device> [--size=<size> | -x <size>] + [--secp=<security-protocol> | -p <security-protocol>] + [--spsp=<protocol-specific> | -s <protocol-specific>] + [--nssf=<nvme-specific> | -N <nvme-specific>] + [--al=<allocation-length> | -t <allocation-length>] + [--namespace-id=<nsid> | -n <nsid>] [--raw-binary | -b] + [--output-format=<fmt> | -o <fmt>] [--verbose | -v] + +DESCRIPTION +----------- +The Security Receive command transfers the status and data result of +one or more Security Send commands that were previously submitted to +the controller. + +The association between a Security Receive command and previous Security +Send commands is dependent on the Security Protocol. The format of the +data to be transferred is dependent on the Security Protocol. Refer to +SPC-4 for Security Protocol details. + +Each Security Receive command returns the appropriate data corresponding +to a Security Send command as defined by the rules of the Security +Protocol. The Security Receive command data may not be retained if there +is a loss of communication between the controller and host, or if a +controller reset occurs. + +OPTIONS +------- +-n <nsid>:: +--namespace-id=<nsid>:: + Target a specific namespace for this security command. + +-N <nssf>:: +--nssf=<nssf>:: + NVMe Security Specific field. If using security protocol EAh + assigned for NVMe use, the NVMe security specific field indicates + which reply memory buffer target. + +-x <size>:: +--size=<size>:: + Size of buffer to allocate. One success it will be printed + to STDOUT. + +-p <security-protocol>:: +--secp=<security-protocol>:: + Security Protocol: This field specifies the security protocol + as defined in SPC-4. The controller shall fail the command with + Invalid Parameter indicated if a reserved value of the Security + Protocol is specified. + +-s <security-protocol-specific>:: +--spsp=<security-protocol-specific>:: + SP Specific: The value of this field is specific to the Security + Protocol as defined in SPC-4. + +-t <allocation-length>:: +--al=<allocation-length>:: + Allocation Length: The value of this field is specific to the + Security Protocol as defined in SPC-4. + +-b:: +--raw-binary:: + Print the raw buffer to stdout. Defaults to print in hex. + +-o <fmt>:: +--output-format=<fmt>:: + Set the reporting format to 'normal', 'json' or 'binary'. Only one + output format can be used at a time. + +-v:: +--verbose:: + Increase the information detail in the output. + +EXAMPLES +-------- +No Examples + +NVME +---- +Part of the nvme-user suite |