Adding upstream version 0.37.upstream/0.37upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 0 insertions, 144 deletions

diff --git a/man/nwipe.1 b/man/nwipe.1
deleted file mode 100644
index d7981ad..0000000
--- a/man/nwipe.1
+++ /dev/null
@@ -1,144 +0,0 @@
-.TH NWIPE "20" "February 2024" "nwipe version 0.36" "User Commands"
-.SH NAME
-nwipe \- securely erase disks
-.SH SYNOPSIS
-.B nwipe
-[\fIoptions\fR] [\fIdevice1\fR] [\fIdevice2\fR] ...
-.SH DESCRIPTION
-nwipe is a command that will securely erase disks using a variety of
-recognised methods.  It is a fork of the dwipe command used by Darik's Boot
-and Nuke (dban).  nwipe is included with partedmagic if you want a quick and
-easy bootable CD version.  nwipe was created out of a need to run the DBAN
-dwipe command outside of DBAN, in order to allow its use with any host
-distribution, thus giving better hardware support.  It is essentially the
-same as dwipe, with a few changes:
-.TP
-- pthreads is used instead of fork
-.TP
-- The parted library is used to detect drives
-.TP
-- The code is designed to be compiled with gcc
-.TP
-- SIGUSR1 can be used to log the stats of the current wipe
-
-.SH OPTIONS
-.TP
-\fB\-V\fR, \fB\-\-version\fR
-Prints the version number
-.TP
-\fB\-h\fR, \fB\-\-help\fR
-Prints a help summary
-.TP
-\fB\-\-autonuke\fR
-If no devices have been specified on the command line, starts wiping all
-devices immediately. If devices have been specified, starts wiping only
-those specified devices immediately.
-.TP
-\fB\-\-autopoweroff\fR
-Power off system on completion of wipe delayed for one minute. During
-this one minute delay you can abort the shutdown by typing sudo shutdown -c
-.TP
-\fB\-\-sync\fR=\fINUM\fR
-Will perform a syn after NUM writes (default: 100000)
-.IP
-0    \- fdatasync after the disk is completely written
-       fdatasync errors not detected until completion.
-       0 is not recommended as disk errors may cause nwipe
-       to appear to hang
-.IP
-1    \- fdatasync after every write
-       Warning: Lower values will reduce wipe speeds.
-.IP
-1000 \- fdatasync after 1000 writes
-.TP
-\fB\-\-noblank\fR
-Do not perform the final blanking pass after the wipe (default is to blank,
-except when the method is RCMP TSSIT OPS\-II).
-.TP
-\fB\-\-nowait\fR
-Do not wait for a key before exiting (default is to wait).
-.TP
-\fB\-\-nosignals\fR
-Do not allow signals to interrupt a wipe (default is to allow).
-.TP
-\fB\-\-nousb\fR
-Do not show or wipe any USB devices, whether in GUI, --nogui or autonuke
-mode. (default is to allow USB devices to be shown and wiped).
-.TP
-\fB\-\-nogui\fR
-Do not show the GUI interface. Can only be used with the autonuke option.
-Nowait option is automatically invoked with the nogui option.
-SIGUSR1 can be used to retrieve the current wiping statistics.
-.TP
-\fB\-v\fR, \fB\-\-verbose\fR
-Log more messages, useful for debugging.
-.TP
-\fB\-\-verify\fR=\fITYPE\fR
-Whether to perform verification of erasure (default: last)
-.IP
-off   \- Do not verify
-.IP
-last  \- Verify after the last pass
-.IP
-all   \- Verify every pass
-.IP
-Please mind that HMG IS5 enhanced always verifies the last (PRNG) pass
-regardless of this option.
-.TP
-\fB\-m\fR, \fB\-\-method\fR=\fIMETHOD\fR
-The wiping method (default: dodshort).
-.IP
-dod522022m / dod       \- 7 pass DOD 5220.22\-M method
-.IP
-dodshort / dod3pass    \- 3 pass DOD method
-.IP
-gutmann                \- Peter Gutmann's Algorithm
-.IP
-ops2                   \- RCMP TSSIT OPS\-II
-.IP
-random / prng / stream \- PRNG Stream
-.IP
-zero / quick           \- Overwrite with zeros 0x00
-.IP
-one                    \- Overwrite with ones 0xFF
-.IP
-verify_zero            \- Verifies disk is zero filled
-.IP
-verify_one             \- Verifies disk is 0xFF filled
-.IP
-is5enh                 \- HMG IS5 enhanced
-.TP
-\fB\-l\fR, \fB\-\-logfile\fR=\fIFILE\fR
-Filename to log to. Default is STDOUT
-.TP
-\fB\-P\fR, \fB\-\-PDFreportpath\fR=\fIDIR\fR
-Directory to write the PDF nwipe reports/certificates to.
-Defaults to ".".
-If \fIDIR\fR is set to \fInoPDF\fR no report PDF files are written.
-.TP
-\fB\-p\fR, \fB\-\-prng\fR=\fIMETHOD\fR
-PRNG option (mersenne|twister|isaac|isaac64)
-.TP
-\fB\-q\fR, \fB\-\-quiet\fR
-Anonymize serial numbers, Gui & logs display:
- XXXXXXXX = S/N obtained & anonymized.
- ???????? = S/N not available.
-.TP
-\fB\-r\fR, \fB\-\-rounds\fR=\fINUM\fR
-Number of times to wipe the device using the selected method (default: 1)
-.TP
-\fB\-e\fR, \fB\-\-exclude\fR=\fIDEVICES\fR
-Up to ten comma separated devices to be excluded, examples:
- --exclude=/dev/sdc
- --exclude=/dev/sdc,/dev/sdd
-.SH BUGS
-Please see the GitHub site for the latest list
-(https://github.com/martijnvanbrummelen/nwipe/issues)
-.SH AUTHOR
-Nwipe is developed by Martijn van Brummelen <github@brumit.nl>
-.SH "SEE ALSO"
-.BR shred (1),
-.BR dwipe (1),
-.BR dd (1),
-.BR dcfldd (1),
-.BR dc3dd (1)