From e244c93d21bcacf1a0eedefdcc3018a362274796 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Wed, 17 Apr 2024 00:13:02 +0200 Subject: Adding upstream version 0.36. Signed-off-by: Daniel Baumann --- man/nwipe.1 | 144 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 144 insertions(+) create mode 100644 man/nwipe.1 (limited to 'man/nwipe.1') diff --git a/man/nwipe.1 b/man/nwipe.1 new file mode 100644 index 0000000..d7981ad --- /dev/null +++ b/man/nwipe.1 @@ -0,0 +1,144 @@ +.TH NWIPE "20" "February 2024" "nwipe version 0.36" "User Commands" +.SH NAME +nwipe \- securely erase disks +.SH SYNOPSIS +.B nwipe +[\fIoptions\fR] [\fIdevice1\fR] [\fIdevice2\fR] ... +.SH DESCRIPTION +nwipe is a command that will securely erase disks using a variety of +recognised methods. It is a fork of the dwipe command used by Darik's Boot +and Nuke (dban). nwipe is included with partedmagic if you want a quick and +easy bootable CD version. nwipe was created out of a need to run the DBAN +dwipe command outside of DBAN, in order to allow its use with any host +distribution, thus giving better hardware support. It is essentially the +same as dwipe, with a few changes: +.TP +- pthreads is used instead of fork +.TP +- The parted library is used to detect drives +.TP +- The code is designed to be compiled with gcc +.TP +- SIGUSR1 can be used to log the stats of the current wipe + +.SH OPTIONS +.TP +\fB\-V\fR, \fB\-\-version\fR +Prints the version number +.TP +\fB\-h\fR, \fB\-\-help\fR +Prints a help summary +.TP +\fB\-\-autonuke\fR +If no devices have been specified on the command line, starts wiping all +devices immediately. If devices have been specified, starts wiping only +those specified devices immediately. +.TP +\fB\-\-autopoweroff\fR +Power off system on completion of wipe delayed for one minute. During +this one minute delay you can abort the shutdown by typing sudo shutdown -c +.TP +\fB\-\-sync\fR=\fINUM\fR +Will perform a syn after NUM writes (default: 100000) +.IP +0 \- fdatasync after the disk is completely written + fdatasync errors not detected until completion. + 0 is not recommended as disk errors may cause nwipe + to appear to hang +.IP +1 \- fdatasync after every write + Warning: Lower values will reduce wipe speeds. +.IP +1000 \- fdatasync after 1000 writes +.TP +\fB\-\-noblank\fR +Do not perform the final blanking pass after the wipe (default is to blank, +except when the method is RCMP TSSIT OPS\-II). +.TP +\fB\-\-nowait\fR +Do not wait for a key before exiting (default is to wait). +.TP +\fB\-\-nosignals\fR +Do not allow signals to interrupt a wipe (default is to allow). +.TP +\fB\-\-nousb\fR +Do not show or wipe any USB devices, whether in GUI, --nogui or autonuke +mode. (default is to allow USB devices to be shown and wiped). +.TP +\fB\-\-nogui\fR +Do not show the GUI interface. Can only be used with the autonuke option. +Nowait option is automatically invoked with the nogui option. +SIGUSR1 can be used to retrieve the current wiping statistics. +.TP +\fB\-v\fR, \fB\-\-verbose\fR +Log more messages, useful for debugging. +.TP +\fB\-\-verify\fR=\fITYPE\fR +Whether to perform verification of erasure (default: last) +.IP +off \- Do not verify +.IP +last \- Verify after the last pass +.IP +all \- Verify every pass +.IP +Please mind that HMG IS5 enhanced always verifies the last (PRNG) pass +regardless of this option. +.TP +\fB\-m\fR, \fB\-\-method\fR=\fIMETHOD\fR +The wiping method (default: dodshort). +.IP +dod522022m / dod \- 7 pass DOD 5220.22\-M method +.IP +dodshort / dod3pass \- 3 pass DOD method +.IP +gutmann \- Peter Gutmann's Algorithm +.IP +ops2 \- RCMP TSSIT OPS\-II +.IP +random / prng / stream \- PRNG Stream +.IP +zero / quick \- Overwrite with zeros 0x00 +.IP +one \- Overwrite with ones 0xFF +.IP +verify_zero \- Verifies disk is zero filled +.IP +verify_one \- Verifies disk is 0xFF filled +.IP +is5enh \- HMG IS5 enhanced +.TP +\fB\-l\fR, \fB\-\-logfile\fR=\fIFILE\fR +Filename to log to. Default is STDOUT +.TP +\fB\-P\fR, \fB\-\-PDFreportpath\fR=\fIDIR\fR +Directory to write the PDF nwipe reports/certificates to. +Defaults to ".". +If \fIDIR\fR is set to \fInoPDF\fR no report PDF files are written. +.TP +\fB\-p\fR, \fB\-\-prng\fR=\fIMETHOD\fR +PRNG option (mersenne|twister|isaac|isaac64) +.TP +\fB\-q\fR, \fB\-\-quiet\fR +Anonymize serial numbers, Gui & logs display: + XXXXXXXX = S/N obtained & anonymized. + ???????? = S/N not available. +.TP +\fB\-r\fR, \fB\-\-rounds\fR=\fINUM\fR +Number of times to wipe the device using the selected method (default: 1) +.TP +\fB\-e\fR, \fB\-\-exclude\fR=\fIDEVICES\fR +Up to ten comma separated devices to be excluded, examples: + --exclude=/dev/sdc + --exclude=/dev/sdc,/dev/sdd +.SH BUGS +Please see the GitHub site for the latest list +(https://github.com/martijnvanbrummelen/nwipe/issues) +.SH AUTHOR +Nwipe is developed by Martijn van Brummelen +.SH "SEE ALSO" +.BR shred (1), +.BR dwipe (1), +.BR dd (1), +.BR dcfldd (1), +.BR dc3dd (1) -- cgit v1.2.3