/* * gui.c: An ncurses GUI for nwipe. * * Copyright Darik Horn . * * Modifications to original dwipe Copyright Andy Beverley * * This program is free software; you can redistribute it and/or modify it under * the terms of the GNU General Public License as published by the Free Software * Foundation, version 2. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS * FOR A PARTICULAR PURPOSE. See the GNU General Public License for more * details. * * You should have received a copy of the GNU General Public License along with * this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. * */ /* RATIONALE: * * This entire GUI is a non-portable task-specific thunk. * * The alternatives are, however, no better. The CDK is large and clumsy, * and things like ncurses libmenu are not worth the storage overhead. * */ #ifndef _DEFAULT_SOURCE #define _DEFAULT_SOURCE #endif #include #ifndef _POSIX_SOURCE #define _POSIX_SOURCE #endif #include #include #include #include #include #include #include #include #include #include "nwipe.h" #include "context.h" #include "method.h" #include "prng.h" #include "options.h" #include "gui.h" #include "pass.h" #include "logging.h" #include "version.h" #include "temperature.h" #include "miscellaneous.h" #include "hpa_dco.h" #include "customers.h" #include "conf.h" #define NWIPE_GUI_PANE 8 /* Header window: width, height, x coordinate, y coordinate. */ #define NWIPE_GUI_HEADER_W COLS #define NWIPE_GUI_HEADER_H 1 #define NWIPE_GUI_HEADER_X 0 #define NWIPE_GUI_HEADER_Y 0 /* Footer window: width, height, x coordinate, y coordinate. */ #define NWIPE_GUI_FOOTER_W COLS #define NWIPE_GUI_FOOTER_H 1 #define NWIPE_GUI_FOOTER_X 0 #define NWIPE_GUI_FOOTER_Y ( LINES - 1 ) /* Options window: width, height, x coorindate, y coordinate. */ #define NWIPE_GUI_OPTIONS_W 44 #define NWIPE_GUI_OPTIONS_H 7 #define NWIPE_GUI_OPTIONS_Y 1 #define NWIPE_GUI_OPTIONS_X 0 /* Options fields, relative to their window. */ #define NWIPE_GUI_OPTIONS_TAB 10 #define NWIPE_GUI_OPTIONS_ENTROPY_Y 1 #define NWIPE_GUI_OPTIONS_ENTROPY_X 1 #define NWIPE_GUI_OPTIONS_PRNG_Y 2 #define NWIPE_GUI_OPTIONS_PRNG_X 1 #define NWIPE_GUI_OPTIONS_METHOD_Y 3 #define NWIPE_GUI_OPTIONS_METHOD_X 1 #define NWIPE_GUI_OPTIONS_VERIFY_Y 4 #define NWIPE_GUI_OPTIONS_VERIFY_X 1 #define NWIPE_GUI_OPTIONS_ROUNDS_Y 5 #define NWIPE_GUI_OPTIONS_ROUNDS_X 1 /* Stats window: width, height, x coordinate, y coordinate. */ #define NWIPE_GUI_STATS_W ( COLS - 44 ) #define NWIPE_GUI_STATS_H 7 #define NWIPE_GUI_STATS_Y 1 #define NWIPE_GUI_STATS_X 44 /* Stats fields, relative to their window. */ #define NWIPE_GUI_STATS_RUNTIME_Y 1 #define NWIPE_GUI_STATS_RUNTIME_X 1 #define NWIPE_GUI_STATS_ETA_Y 2 #define NWIPE_GUI_STATS_ETA_X 1 #define NWIPE_GUI_STATS_LOAD_Y 3 #define NWIPE_GUI_STATS_LOAD_X 1 #define NWIPE_GUI_STATS_THROUGHPUT_Y 4 #define NWIPE_GUI_STATS_THROUGHPUT_X 1 #define NWIPE_GUI_STATS_ERRORS_Y 5 #define NWIPE_GUI_STATS_ERRORS_X 1 #define NWIPE_GUI_STATS_TAB 16 /* Select window: width, height, x coordinate, y coordinate. */ #define NWIPE_GUI_MAIN_W COLS #define NWIPE_GUI_MAIN_H ( LINES - NWIPE_GUI_MAIN_Y - 1 ) #define NWIPE_GUI_MAIN_Y 8 #define NWIPE_GUI_MAIN_X 0 #define SKIP_DEV_PREFIX 5 /* Window pointers. */ WINDOW* footer_window; WINDOW* header_window; WINDOW* main_window; WINDOW* options_window; WINDOW* stats_window; PANEL* footer_panel; PANEL* header_panel; PANEL* main_panel; PANEL* options_panel; PANEL* stats_panel; /* Options window title. */ const char* options_title = " Options "; /* Statistics window title. */ const char* stats_title = " Statistics "; /* Footer labels. */ const char* main_window_footer = "S=Start m=Method p=PRNG v=Verify r=Rounds b=Blanking Space=Select c=Config CTRL+C=Quit"; const char* main_window_footer_warning_lower_case_s = " WARNING: To start the wipe press SHIFT+S (uppercase S) "; const char* main_window_footer_warning_no_blanking_with_ops2 = " WARNING: Zero blanking is not allowed with ops2 method "; const char* main_window_footer_warning_no_blanking_with_verify_only = " WARNING: Zero blanking is not allowed with verify method "; const char* main_window_footer_warning_no_drive_selected = " No drives selected, use spacebar to select a drive, then press S to start "; /* Oddly enough, placing extra quotes around the footer strings fixes corruption to the right * of the footer message when the terminal is resized, a quirk in ncurses? - DO NOT REMOVE THE \" */ const char* selection_footer = "J=Down K=Up Space=Select Backspace=Cancel Ctrl+C=Quit"; const char* selection_footer_config = "J=Down K=Up Return=Select ESC|Backspace=back Ctrl+C=Quit"; const char* selection_footer_preview_prior_to_drive_selection = "A=Accept & display drives J=Down K=Up Space=Select Backspace=Cancel Ctrl+C=Quit"; const char* selection_footer_add_customer = "S=Save J=Down K=Up Space=Select Backspace=Cancel Ctrl+C=Quit"; const char* selection_footer_add_customer_yes_no = "Save Customer Details Y/N"; const char* end_wipe_footer = "B=[Toggle between dark\\blank\\blue screen] Ctrl+C=Quit"; const char* rounds_footer = "Left=Erase Esc=Cancel Ctrl+C=Quit"; const char* selection_footer_text_entry = "Esc=Cancel Return=Submit Ctrl+C=Quit"; /* The number of lines available in the terminal */ int stdscr_lines; /* The number of columns available in the terminal */ int stdscr_cols; /* The size of the terminal lines when previously checked */ int stdscr_lines_previous; /* The size of the terminal columns when previously checked */ int stdscr_cols_previous; int tft_saver = 0; void nwipe_gui_title( WINDOW* w, const char* s ) { /** * Prints the string 's' centered on the first line of the window 'w'. */ /* The number of lines in the window. (Not used.) */ int wy; (void) wy; /* flag wy not used to the compiler, to silence warning */ /* The number of columns in the window. */ int wx; /* Get the window dimensions. */ getmaxyx( w, wy, wx ); /*Calculate available total margin */ int margin = ( wx - strlen( s ) ); if( margin < 0 ) { margin = 0; } /* tft_saver = grey text on black mode */ if( tft_saver ) { wattron( w, A_BOLD ); } /* Print the title. */ mvwprintw( w, 0, margin / 2, "%s", s ); } /* nwipe_gui_title */ void nwipe_init_pairs( void ) { if( has_colors() ) { /* Initialize color capabilities. */ start_color(); if( can_change_color() ) { /* Redefine cyan to gray. */ init_color( COLOR_CYAN, 128, 128, 128 ); } /* If we are in tft saver mode set grey text on black background else * Set white on blue as the emphasis color */ if( tft_saver ) { init_pair( 1, COLOR_BLACK, COLOR_BLACK ); } else { init_pair( 1, COLOR_WHITE, COLOR_BLUE ); } /* Set gray (or cyan) on blue as the normal color. */ init_pair( 2, COLOR_CYAN, COLOR_BLUE ); /* Set red on blue as the hilite color. */ init_pair( 3, COLOR_RED, COLOR_BLUE ); /* If we are in tft saver mode set grey text on black background else * Set white on blue as the emphasis color */ if( tft_saver ) { init_pair( 4, COLOR_BLACK, COLOR_BLACK ); } else { init_pair( 4, COLOR_BLUE, COLOR_WHITE ); } /* Set white on green for success messages. */ init_pair( 5, COLOR_WHITE, COLOR_GREEN ); /* Set white on red for failure messages. */ init_pair( 6, COLOR_WHITE, COLOR_RED ); /* Set black on black for when hiding the display. */ init_pair( 7, COLOR_BLACK, COLOR_BLACK ); /* Set green on blue for reverse bold messages */ init_pair( 8, COLOR_GREEN, COLOR_WHITE ); /* Set green on blue for reverse bold error messages */ init_pair( 9, COLOR_RED, COLOR_WHITE ); /* Set black on yellow for warning messages */ init_pair( 10, COLOR_BLACK, COLOR_YELLOW ); /* Set black on blue for minimum temperature reached */ init_pair( 11, COLOR_BLACK, COLOR_BLUE ); /* Set blue on blue to make temperature invisible */ init_pair( 12, COLOR_BLUE, COLOR_BLUE ); /* Set magenta on blue */ init_pair( 13, COLOR_MAGENTA, COLOR_BLUE ); /* Set white on black for low critical temperature */ init_pair( 14, COLOR_WHITE, COLOR_BLACK ); /* Set the background style. */ wbkgdset( stdscr, COLOR_PAIR( 1 ) | ' ' ); } } void nwipe_gui_init( void ) { /** * Initializes the ncurses gui. */ /* Initialize the screen. */ initscr(); /* Disable TTY line buffering. */ cbreak(); /* Disable TTY echo. */ noecho(); /* Enable most special keys. */ keypad( stdscr, TRUE ); /* Create the text/background color pairs */ nwipe_init_pairs(); /* Clear the screen. */ wclear( stdscr ); /* Create the header window. */ nwipe_gui_create_header_window(); /* Create the footer window and panel */ nwipe_gui_create_footer_window( main_window_footer ); /* Create the options window and panel */ nwipe_gui_create_options_window(); /* Create the stats window. */ nwipe_gui_create_stats_window(); /* Create a new main window and panel */ nwipe_gui_create_main_window(); update_panels(); doupdate(); /* Hide the cursor. */ curs_set( 0 ); } /* nwipe_gui_init */ void nwipe_gui_free( void ) { /** * Releases the ncurses gui. * */ /* Free ncurses resources. */ if( del_panel( footer_panel ) != OK ) { nwipe_log( NWIPE_LOG_ERROR, "Deleting footer panel failed!." ); } if( del_panel( header_panel ) != OK ) { nwipe_log( NWIPE_LOG_ERROR, "Deleting header panel failed!." ); } if( del_panel( main_panel ) != OK ) { nwipe_log( NWIPE_LOG_ERROR, "Deleting main panel failed!." ); } if( del_panel( options_panel ) != OK ) { nwipe_log( NWIPE_LOG_ERROR, "Deleting options panel failed!." ); } if( del_panel( stats_panel ) != OK ) { nwipe_log( NWIPE_LOG_ERROR, "Deleting stats panel failed!." ); } if( delwin( footer_window ) != OK ) { nwipe_log( NWIPE_LOG_ERROR, "Deleting footer window failed!." ); } if( delwin( header_window ) != OK ) { nwipe_log( NWIPE_LOG_ERROR, "Deleting header window failed!." ); } if( delwin( main_window ) != OK ) { nwipe_log( NWIPE_LOG_ERROR, "Deleting main window failed!." ); } if( delwin( options_window ) != OK ) { nwipe_log( NWIPE_LOG_ERROR, "Deleting options window failed!." ); } if( delwin( stats_window ) != OK ) { nwipe_log( NWIPE_LOG_ERROR, "Deleting stats window failed!." ); } if( endwin() != OK ) { nwipe_log( NWIPE_LOG_ERROR, "Curses endwin() failed !" ); } } /* nwipe_gui_free */ void nwipe_gui_create_main_window() { /* Create the main window. */ main_window = newwin( NWIPE_GUI_MAIN_H, NWIPE_GUI_MAIN_W, NWIPE_GUI_MAIN_Y, NWIPE_GUI_MAIN_X ); main_panel = new_panel( main_window ); if( has_colors() ) { /* Set the background style. */ wbkgdset( main_window, COLOR_PAIR( 1 ) | ' ' ); /* Apply the color change. */ wattron( main_window, COLOR_PAIR( 1 ) ); /* In tft saver mode we toggle the intensity bit which gives us grey text */ if( tft_saver ) { wattron( main_window, A_BOLD ); } else { wattroff( main_window, A_BOLD ); } } /* Clear the main window. */ werase( main_window ); /* Add a border. */ box( main_window, 0, 0 ); /* refresh main window */ wnoutrefresh( main_window ); } /* nwipe_gui_create_main_window */ void nwipe_gui_create_header_window() { char anon_label[] = " (ANONYMIZED)"; char bannerplus[80]; /* Create the header window. */ header_window = newwin( NWIPE_GUI_HEADER_H, NWIPE_GUI_HEADER_W, NWIPE_GUI_HEADER_Y, NWIPE_GUI_HEADER_X ); header_panel = new_panel( header_window ); if( has_colors() ) { /* Set the background style of the header window. */ wbkgdset( header_window, COLOR_PAIR( 4 ) | ' ' ); if( tft_saver ) { wattron( main_window, A_BOLD ); } } /* Clear the header window. */ werase( header_window ); /* If in anonymized mode modify the title banner to reflect this */ strcpy( bannerplus, banner ); if( nwipe_options.quiet ) { strcat( bannerplus, anon_label ); } /* Print the product banner. */ nwipe_gui_title( header_window, bannerplus ); /* Refresh the header window */ wnoutrefresh( header_window ); } /* nwipe_gui_create_header_window */ void nwipe_gui_create_footer_window( const char* footer_text ) { /* Create the footer window. */ footer_window = newwin( NWIPE_GUI_FOOTER_H, NWIPE_GUI_FOOTER_W, NWIPE_GUI_FOOTER_Y, NWIPE_GUI_FOOTER_X ); footer_panel = new_panel( footer_window ); if( has_colors() ) { /* Set the background style of the footer window. */ wbkgdset( footer_window, COLOR_PAIR( 4 ) | ' ' ); } /* Erase the footer window. */ werase( footer_window ); /* Add help text to the footer */ nwipe_gui_title( footer_window, footer_text ); /* Refresh the footer window */ wnoutrefresh( footer_window ); } /* nwipe_gui_create_footer_window */ void nwipe_gui_amend_footer_window( const char* footer_text ) { /* Clear the footer window. */ werase( footer_window ); /* Add help text to the footer */ nwipe_gui_title( footer_window, footer_text ); /* Refresh the footer window */ wnoutrefresh( footer_window ); } /* nwipe_gui_amend_footer_window */ void nwipe_gui_create_options_window() { /* Create the options window. */ options_window = newwin( NWIPE_GUI_OPTIONS_H, NWIPE_GUI_OPTIONS_W, NWIPE_GUI_OPTIONS_Y, NWIPE_GUI_OPTIONS_X ); options_panel = new_panel( options_window ); if( has_colors() ) { /* Set the background style of the options window. */ wbkgdset( options_window, COLOR_PAIR( 1 ) | ' ' ); /* Apply the color change to the options window. */ wattron( options_window, COLOR_PAIR( 1 ) ); if( tft_saver ) { wattron( options_window, A_BOLD ); } } /* Clear the options window. */ werase( options_window ); /* Add a border. */ box( options_window, 0, 0 ); } /* nwipe_gui_create_options_window */ void nwipe_gui_create_stats_window() { /* Create the stats window. */ stats_window = newwin( NWIPE_GUI_STATS_H, NWIPE_GUI_STATS_W, NWIPE_GUI_STATS_Y, NWIPE_GUI_STATS_X ); stats_panel = new_panel( stats_window ); if( has_colors() ) { /* Set the background style of the stats window. */ wbkgdset( stats_window, COLOR_PAIR( 1 ) | ' ' ); /* Apply the color change to the stats window. */ wattron( stats_window, COLOR_PAIR( 1 ) ); if( tft_saver ) { wattron( stats_window, A_BOLD ); } } /* Clear the new window. */ werase( stats_window ); /* Add a border. */ box( stats_window, 0, 0 ); /* Add a title. */ nwipe_gui_title( stats_window, stats_title ); /* Print field labels. */ mvwprintw( stats_window, NWIPE_GUI_STATS_RUNTIME_Y, NWIPE_GUI_STATS_RUNTIME_X, "Runtime: " ); mvwprintw( stats_window, NWIPE_GUI_STATS_ETA_Y, NWIPE_GUI_STATS_ETA_X, "Remaining: " ); mvwprintw( stats_window, NWIPE_GUI_STATS_LOAD_Y, NWIPE_GUI_STATS_LOAD_X, "Load Averages: " ); mvwprintw( stats_window, NWIPE_GUI_STATS_THROUGHPUT_Y, NWIPE_GUI_STATS_THROUGHPUT_X, "Throughput: " ); mvwprintw( stats_window, NWIPE_GUI_STATS_ERRORS_Y, NWIPE_GUI_STATS_ERRORS_X, "Errors: " ); } /* nwipe_gui_create_stats_window */ void nwipe_gui_create_all_windows_on_terminal_resize( int force_creation, const char* footer_text ) { /* Get the terminal size */ getmaxyx( stdscr, stdscr_lines, stdscr_cols ); /* If the user has resized the terminal then recreate the windows and panels */ if( stdscr_cols_previous != stdscr_cols || stdscr_lines_previous != stdscr_lines || force_creation == 1 ) { /* Save the revised terminal size so we check whether the user has resized next time */ stdscr_lines_previous = stdscr_lines; stdscr_cols_previous = stdscr_cols; /* Clear the screen. */ wclear( stdscr ); /* Create a new header window and panel due to terminal size having changed */ nwipe_gui_create_header_window(); /* Create a new main window and panel due to terminal size having changed */ nwipe_gui_create_main_window(); /* Create a new footer window and panel due to terminal size having changed */ nwipe_gui_create_footer_window( footer_text ); /* Create a new options window and panel due to terminal size having changed */ nwipe_gui_create_options_window(); /* Create a new stats window and panel due to terminal size having changed */ nwipe_gui_create_stats_window(); /* Update the options window. */ nwipe_gui_options(); update_panels(); doupdate(); } } void nwipe_gui_select( int count, nwipe_context_t** c ) { extern int terminate_signal; /* Widget labels. */ const char* select_title = " Disks and Partitions "; /* The number of lines available in the window. */ int wlines; /* The number of columns available in the window. */ int wcols; /* The number of selection elements that we can show in the window. */ int slots; /* The index of the element that is visible in the first slot. */ int offset = 0; /* The selection focus. */ int focus = 0; /* A generic loop variable. */ int i = 0; /* User input buffer. */ int keystroke; /* The current working line. */ int yy; /* Flag, Valid key hit = 1, anything else = 0 */ int validkeyhit; /* Counts number of drives and partitions that have been selected */ int number_of_selected_contexts = 0; /* Control A toggle status -1=indefined, 0=all drives delected, 1=all drives selected */ int select_all_toggle_status = -1; /* Get the terminal size */ getmaxyx( stdscr, stdscr_lines, stdscr_cols ); /* Save the terminal size so we check whether the user has resized */ stdscr_lines_previous = stdscr_lines; stdscr_cols_previous = stdscr_cols; time_t temperature_check_time = time( NULL ); /* Used in the selection loop to trap a failure of the timeout(), getch() mechanism to block for the designated * period */ int iteration_counter; /* Used in the selection loop to trap a failure of the timeout(), getch() mechanism to block for the designated * period */ int expected_iterations; time_t previous_iteration_timestamp; do { nwipe_gui_create_all_windows_on_terminal_resize( 0, main_window_footer ); /* There is one slot per line. */ getmaxyx( main_window, wlines, wcols ); /* Less two lines for the box and two lines for padding. */ slots = wlines - 4; if( slots < 0 ) { slots = 0; } /* The code here adjusts the offset value, required when the terminal is resized vertically */ if( slots > count ) { offset = 0; } else { if( focus >= count ) { /* The focus is already at the last element. */ focus = count - 1; } if( focus < 0 ) { /* The focus is already at the last element. */ focus = 0; } } if( count >= slots && slots > 0 ) { offset = focus + 1 - slots; if( offset < 0 ) { offset = 0; } } /* Clear the main window, necessary when switching selections such as method etc */ werase( main_window ); /* Refresh main window */ wnoutrefresh( main_window ); /* If the user selected an option the footer text would have changed. * Here we set it back to the main key help text */ nwipe_gui_create_footer_window( main_window_footer ); /* Refresh the stats window */ wnoutrefresh( stats_window ); /* Refresh the options window */ wnoutrefresh( options_window ); /* Update the options window. */ nwipe_gui_options(); /* Initialize the line offset. */ yy = 2; for( i = 0; i < slots && i < count; i++ ) { /* Move to the next line. */ mvwprintw( main_window, yy++, 1, " " ); if( i + offset == focus ) { if( c[focus]->select == NWIPE_SELECT_TRUE || c[focus]->select == NWIPE_SELECT_FALSE ) { /* Print the 'enabled' cursor. */ waddch( main_window, ACS_RARROW ); } else { /* Print the 'disabled' cursor. */ waddch( main_window, ACS_DIAMOND ); } } else { /* Print whitespace. */ waddch( main_window, ' ' ); } /* In the event for the offset value somehow becoming invalid, this if statement will prevent a segfault * and the else part will log the out of bounds values for debugging */ if( i + offset >= 0 && i + offset < count ) { switch( c[i + offset]->select ) { case NWIPE_SELECT_TRUE: if( nwipe_options.method == &nwipe_verify_zero || nwipe_options.method == &nwipe_verify_one ) { wprintw( main_window, "[vrfy] %s %s ", c[i + offset]->gui_device_name, c[i + offset]->device_type_str ); } else { wprintw( main_window, "[wipe] %s %s ", c[i + offset]->gui_device_name, c[i + offset]->device_type_str ); } break; case NWIPE_SELECT_FALSE: /* Print an element that is not selected. */ wprintw( main_window, "[ ] %s %s ", c[i + offset]->gui_device_name, c[i + offset]->device_type_str ); break; case NWIPE_SELECT_TRUE_PARENT: /* This element will be wiped when its parent is wiped. */ wprintw( main_window, "[****] %s %s ", c[i + offset]->gui_device_name, c[i + offset]->device_type_str ); break; case NWIPE_SELECT_FALSE_CHILD: /* We can't wipe this element because it has a child that is being wiped. */ wprintw( main_window, "[----] %s %s ", c[i + offset]->gui_device_name, c[i + offset]->device_type_str ); break; case NWIPE_SELECT_DISABLED: /* We don't know how to wipe this device. (Iomega Zip drives.) */ wprintw( main_window, "[????] %s ", "Unrecognized Device" ); break; default: /* TODO: Handle the sanity error. */ break; } /* switch select */ wprintw( main_window, "[%s] ", c[i + offset]->device_size_text ); /* Read the drive temperature values */ // nwipe_update_temperature( c[i + offset] ); /* print the temperature */ wprintw_temperature( c[i + offset] ); switch( c[i + offset]->HPA_status ) { case HPA_ENABLED: wprintw( main_window, " " ); wattron( main_window, COLOR_PAIR( 9 ) ); wprintw( main_window, "[HS? YES]" ); wattroff( main_window, COLOR_PAIR( 9 ) ); break; case HPA_DISABLED: wprintw( main_window, " " ); wprintw( main_window, "[HS? NO ]" ); break; case HPA_UNKNOWN: wprintw( main_window, " " ); wprintw( main_window, "[HS? ???]" ); break; default: wprintw( main_window, " " ); wprintw( main_window, "[HS? N/A]" ); break; } /* print the drive model and serial number */ wprintw( main_window, " %s/%s", c[i + offset]->device_model, c[i + offset]->device_serial_no ); if( c[i + offset]->HPA_toggle_time + 1 < time( NULL ) ) { switch( c[i + offset]->HPA_display_toggle_state ) { case 0: c[i + offset]->HPA_display_toggle_state = 1; break; case 1: c[i + offset]->HPA_display_toggle_state = 0; break; } c[i + offset]->HPA_toggle_time = time( NULL ); } } else { nwipe_log( NWIPE_LOG_DEBUG, "GUI.c,nwipe_gui_select(), scroll, array index out of bounds, i=%u, count=%u, slots=%u, " "focus=%u, offset=%u", i, count, slots, focus, offset ); } } /* for */ if( offset > 0 ) { mvwprintw( main_window, 1, wcols - 8, " More " ); waddch( main_window, ACS_UARROW ); } if( count - offset > slots ) { mvwprintw( main_window, wlines - 2, wcols - 8, " More " ); waddch( main_window, ACS_DARROW ); } /* Draw a border around the menu window. */ box( main_window, 0, 0 ); /* Print a title. */ nwipe_gui_title( main_window, select_title ); /* Refresh the window. */ wnoutrefresh( main_window ); /* Output to physical screen */ doupdate(); /* Initialise the iteration counter */ iteration_counter = 0; previous_iteration_timestamp = time( NULL ); /* Calculate Maximum allowed iterations per second */ expected_iterations = ( 1000 / GETCH_BLOCK_MS ) * 8; do { /* Wait 250ms for input from getch, if nothing getch will then continue, * This is necessary so that the while loop can be exited by the * terminate_signal e.g.. the user pressing control-c to exit. * Do not change this value, a higher value means the keys become * sluggish, any slower and more time is spent unnecessarily looping * which wastes CPU cycles. */ validkeyhit = 0; timeout( GETCH_BLOCK_MS ); // block getch() for ideally about 250ms. keystroke = getch(); // Get user input. timeout( -1 ); // Switch back to blocking mode. /* To avoid 100% CPU usage, check for a runaway condition caused by the "keystroke = getch(); (above), from * immediately returning an error condition. We check for an error condition because getch() returns a ERR * value when the timeout value "timeout( 250 );" expires as well as when a real error occurs. We can't * differentiate from normal operation and a failure of the getch function to block for the specified period * of timeout. So here we check the while loop hasn't exceeded the number of expected iterations per second * ie. a timeout(250) block value of 250ms means we should not see any more than (1000/250) = 4 iterations. * We increase this to 32 iterations to allow a little tolerance. Why is this necessary? It's been found * that in KDE konsole and other terminals based on the QT terminal engine exiting the terminal without * first exiting nwipe results in nwipe remaining running but detached from any interface which causes * getch to fail and its associated timeout. So the CPU or CPU core rises to 100%. Here we detect that * failure and exit nwipe gracefully with the appropriate error. This does not affect use of tmux for * attaching or detaching from a running nwipe session when sitting at the selection screen. All other * terminals correctly terminate nwipe when the terminal itself is exited. */ iteration_counter++; if( previous_iteration_timestamp == time( NULL ) ) { if( iteration_counter > expected_iterations ) { nwipe_log( NWIPE_LOG_ERROR, "GUI.c,nwipe_gui_select(), loop runaway, did you close the terminal without exiting " "nwipe? Exiting nwipe now." ); /* Issue signal to nwipe to exit immediately but gracefully */ terminate_signal = 1; } } else { /* new second, so reset counter */ iteration_counter = 0; previous_iteration_timestamp = time( NULL ); } /* We don't necessarily use all of these. For future reference these are some CTRL+key values * ^A - 1, ^B - 2, ^D - 4, ^E - 5, ^F - 6, ^G - 7, ^H - 8, ^I - 9, ^K - 11, ^L - 12, ^N - 14, * ^O - 15, ^P - 16, ^R - 18, ^T - 20, ^U - 21, ^V - 22, ^W - 23, ^X - 24, ^Y - 25 * Use nwipe_log( NWIPE_LOG_DEBUG, "Key Name: %s - %u", keyname(keystroke),keystroke) to * figure out what code is returned by what ever key combination */ switch( keystroke ) { case KEY_DOWN: case 'j': case 'J': validkeyhit = 1; /* Increment the focus. */ focus += 1; if( focus >= count ) { /* The focus is already at the last element. */ focus = count - 1; break; } if( focus - offset >= slots ) { /* The next element is offscreen. Scroll down. */ offset += 1; break; } break; case KEY_UP: case 'k': case 'K': validkeyhit = 1; /* Decrement the focus. */ focus -= 1; if( focus < 0 ) { /* The focus is already at the last element. */ focus = 0; break; } if( focus < offset ) { /* The next element is offscreen. Scroll up. */ offset -= 1; break; } break; case KEY_ENTER: case 10: case ' ': validkeyhit = 1; /* TODO: This block should be made into a function. */ if( c[focus]->select == NWIPE_SELECT_TRUE ) { /* Reverse the selection of this element. */ c[focus]->select = NWIPE_SELECT_FALSE; if( c[focus]->device_part == 0 ) { /* Sub-deselect all partitions and slices within this disk. */ for( i = 0; i < count; i++ ) { if( c[i]->device_type == c[focus]->device_type && c[i]->device_host == c[focus]->device_host && c[i]->device_bus == c[focus]->device_bus && c[i]->device_target == c[focus]->device_target && c[i]->device_lun == c[focus]->device_lun && c[i]->device_part > 0 ) { c[i]->select = NWIPE_SELECT_FALSE; } } /* for all contexts */ } /* if sub-deselect */ else { /* The number of selected partitions or slices within this disk. */ int j = 0; for( i = 0; i < count; i++ ) { if( c[i]->device_type == c[focus]->device_type && c[i]->device_host == c[focus]->device_host && c[i]->device_bus == c[focus]->device_bus && c[i]->device_target == c[focus]->device_target && c[i]->device_lun == c[focus]->device_lun && c[i]->device_part > 0 && c[i]->select == NWIPE_SELECT_TRUE ) { /* Increment the counter. */ j += 1; } } /* for all contexts */ if( j == 0 ) { /* Find the parent disk of this partition or slice. */ for( i = 0; i < count; i++ ) { if( c[i]->device_type == c[focus]->device_type && c[i]->device_host == c[focus]->device_host && c[i]->device_bus == c[focus]->device_bus && c[i]->device_target == c[focus]->device_target && c[i]->device_lun == c[focus]->device_lun && c[i]->device_part == 0 ) { /* Enable the disk element. */ c[i]->select = NWIPE_SELECT_FALSE; } } /* for all contexts */ } /* if */ } /* else super-enable */ break; } /* if NWIPE_SELECT_TRUE */ if( c[focus]->select == NWIPE_SELECT_FALSE ) { /* Reverse the selection. */ c[focus]->select = NWIPE_SELECT_TRUE; if( c[focus]->device_part == 0 ) { /* Sub-select all partitions and slices within this disk. */ for( i = 0; i < count; i++ ) { if( c[i]->device_type == c[focus]->device_type && c[i]->device_host == c[focus]->device_host && c[i]->device_bus == c[focus]->device_bus && c[i]->device_target == c[focus]->device_target && c[i]->device_lun == c[focus]->device_lun && c[i]->device_part > 0 ) { c[i]->select = NWIPE_SELECT_TRUE_PARENT; } } /* for */ } /* if sub-select */ else { /* ASSERT: ( c[focus]->device_part > 0 ) */ /* Super-deselect the disk that contains this device. */ for( i = 0; i < count; i++ ) { if( c[i]->device_type == c[focus]->device_type && c[i]->device_host == c[focus]->device_host && c[i]->device_bus == c[focus]->device_bus && c[i]->device_target == c[focus]->device_target && c[i]->device_lun == c[focus]->device_lun && c[i]->device_part == 0 ) { c[i]->select = NWIPE_SELECT_FALSE_CHILD; } } } /* else super-deselect */ break; } /* if NWIPE_SELECT_FALSE */ /* TODO: Explain to the user why they can't change this. */ break; case 'm': case 'M': validkeyhit = 1; /* Run the method dialog. */ nwipe_gui_method(); break; case 'p': case 'P': validkeyhit = 1; /* Run the PRNG dialog. */ nwipe_gui_prng(); break; case 'r': case 'R': validkeyhit = 1; /* Run the rounds dialog. */ nwipe_gui_rounds(); break; case 'v': case 'V': validkeyhit = 1; /* Run the option dialog. */ nwipe_gui_verify(); break; case 'b': case 'B': validkeyhit = 1; if( nwipe_options.method == &nwipe_ops2 ) { /* Warn the user about that zero blanking with the ops2 method is not allowed */ wattron( footer_window, COLOR_PAIR( 10 ) ); nwipe_gui_amend_footer_window( main_window_footer_warning_no_blanking_with_ops2 ); doupdate(); sleep( 3 ); wattroff( footer_window, COLOR_PAIR( 10 ) ); /* After the delay return footer text back to key help */ nwipe_gui_amend_footer_window( main_window_footer ); doupdate(); break; } if( nwipe_options.method == &nwipe_verify_zero || nwipe_options.method == &nwipe_verify_one ) { /* Warn the user about that zero blanking with the ops2 method is not allowed */ wattron( footer_window, COLOR_PAIR( 10 ) ); nwipe_gui_amend_footer_window( main_window_footer_warning_no_blanking_with_verify_only ); doupdate(); sleep( 3 ); wattroff( footer_window, COLOR_PAIR( 10 ) ); /* After the delay return footer text back to key help */ nwipe_gui_amend_footer_window( main_window_footer ); doupdate(); break; } /* Run the noblank dialog. */ nwipe_gui_noblank(); break; case 'c': case 'C': /* main configuration menu */ validkeyhit = 1; /* Run the configuration dialog */ nwipe_gui_config(); break; case 'S': /* User wants to start the wipe */ validkeyhit = 1; /* Have any drives have been selected ? */ number_of_selected_contexts = 0; for( i = 0; i < count; i++ ) { if( c[i]->select == NWIPE_SELECT_TRUE ) { number_of_selected_contexts += 1; } } /* if no drives have been selected, print a warning on the footer */ if( number_of_selected_contexts == 0 ) { wattron( footer_window, COLOR_PAIR( 10 ) ); nwipe_gui_amend_footer_window( main_window_footer_warning_no_drive_selected ); doupdate(); sleep( 3 ); wattroff( footer_window, COLOR_PAIR( 10 ) ); /* After the delay return footer text back to key help */ nwipe_gui_amend_footer_window( main_window_footer ); doupdate(); /* Remove any repeated S key strokes, without this the gui would hang * for a period of time, i.e sleep above x number of repeated 's' keystrokes * which could run into minutes */ do { timeout( 250 ); // block getch() for 250ms. keystroke = getch(); // Get user input. timeout( -1 ); // Switch back to blocking mode. } while( keystroke == 'S' ); /* Remove the S from keystroke, which allows us to stay within the selection menu loop */ keystroke = 0; } break; case 's': /* user has mistakenly hit the lower case 's' instead of capital 'S' */ validkeyhit = 1; /* Warn the user about their mistake */ wattron( footer_window, COLOR_PAIR( 10 ) ); nwipe_gui_amend_footer_window( main_window_footer_warning_lower_case_s ); doupdate(); sleep( 3 ); wattroff( footer_window, COLOR_PAIR( 10 ) ); /* After the delay return footer text back to key help */ nwipe_gui_amend_footer_window( main_window_footer ); doupdate(); /* Remove any repeated s key strokes, without this the gui would hang * for a period of time, i.e sleep above x number of repeated 's' keystrokes * which could run into minutes */ do { timeout( 250 ); // block getch() for 250ms. keystroke = getch(); // Get user input. timeout( -1 ); // Switch back to blocking mode. } while( keystroke == 's' ); break; case 1: /* Ctrl A - Toggle select/deselect all drives */ validkeyhit = 1; if( select_all_toggle_status == -1 || select_all_toggle_status == 0 ) { for( i = 0; i < count; i++ ) { c[i]->select = NWIPE_SELECT_TRUE; } select_all_toggle_status = 1; } else { if( select_all_toggle_status == 1 ) { for( i = 0; i < count; i++ ) { c[i]->select = NWIPE_SELECT_FALSE; } select_all_toggle_status = 0; } else { nwipe_log( NWIPE_LOG_ERROR, "gui.c:nwipe_gui_select(), Invalid value in variable select_all_toggle_status = %d", select_all_toggle_status ); } } break; } /* keystroke switch */ /* Check the terminal size, if the user has changed it the while loop checks for * this change and exits the valid key hit loop so the windows can be updated */ getmaxyx( stdscr, stdscr_lines, stdscr_cols ); /* Update the selection window every 1 second specifically * so that the drive temperatures are updated and also the line toggle that * occurs with the HPA status and the drive size & temperature. */ if( time( NULL ) > ( temperature_check_time + 1 ) ) { temperature_check_time = time( NULL ); validkeyhit = 1; } } /* key hit loop */ while( validkeyhit == 0 && terminate_signal != 1 && stdscr_cols_previous == stdscr_cols && stdscr_lines_previous == stdscr_lines ); } while( keystroke != 'S' && terminate_signal != 1 ); if( keystroke == 'S' ) { /* If user has pressed S to start wipe change status line */ werase( footer_window ); nwipe_gui_title( footer_window, end_wipe_footer ); wnoutrefresh( footer_window ); } } /* nwipe_gui_select */ void nwipe_gui_options( void ) { /** * Updates the options window. * * @modifies options_window * */ /* Erase the window. */ werase( options_window ); mvwprintw( options_window, NWIPE_GUI_OPTIONS_ENTROPY_Y, NWIPE_GUI_OPTIONS_ENTROPY_X, "Entropy: Linux Kernel (urandom)" ); mvwprintw( options_window, NWIPE_GUI_OPTIONS_PRNG_Y, NWIPE_GUI_OPTIONS_PRNG_X, "PRNG: %s", nwipe_options.prng->label ); mvwprintw( options_window, NWIPE_GUI_OPTIONS_METHOD_Y, NWIPE_GUI_OPTIONS_METHOD_X, "Method: %s", nwipe_method_label( nwipe_options.method ) ); mvwprintw( options_window, NWIPE_GUI_OPTIONS_VERIFY_Y, NWIPE_GUI_OPTIONS_VERIFY_X, "Verify: " ); switch( nwipe_options.verify ) { case NWIPE_VERIFY_NONE: wprintw( options_window, "Off" ); break; case NWIPE_VERIFY_LAST: wprintw( options_window, "Last Pass" ); break; case NWIPE_VERIFY_ALL: wprintw( options_window, "All Passes" ); break; default: wprintw( options_window, "Unknown %i", nwipe_options.verify ); } /* switch verify */ mvwprintw( options_window, NWIPE_GUI_OPTIONS_ROUNDS_Y, NWIPE_GUI_OPTIONS_ROUNDS_X, "Rounds: " ); /* Disable blanking for ops2 and verify methods */ if( nwipe_options.method == &nwipe_ops2 || nwipe_options.method == &nwipe_verify_zero || nwipe_options.method == &nwipe_verify_one ) { nwipe_options.noblank = 1; } if( nwipe_options.noblank ) { wprintw( options_window, "%i (no final blanking pass)", nwipe_options.rounds ); } else { wprintw( options_window, "%i (plus blanking pass)", nwipe_options.rounds ); } /* Add a border. */ box( options_window, 0, 0 ); /* Add a title. */ nwipe_gui_title( options_window, options_title ); /* Refresh the window. */ // wrefresh( options_window ); wnoutrefresh( options_window ); } /* nwipe_gui_options */ void nwipe_gui_rounds( void ) { /** * Allows the user to change the rounds option. * * @modifies nwipe_options.rounds * @modifies main_window * */ /* Set the initial focus. */ int focus = nwipe_options.rounds; /* The first tabstop. */ const int tab1 = 2; /* The current working row. */ int yy; /* Input buffer. */ int keystroke; extern int terminate_signal; /* Update the footer window. */ werase( footer_window ); nwipe_gui_title( footer_window, rounds_footer ); wrefresh( footer_window ); do { /* Erase the main window. */ werase( main_window ); nwipe_gui_create_all_windows_on_terminal_resize( 0, selection_footer ); /* Add a border. */ box( main_window, 0, 0 ); /* Add a title. */ nwipe_gui_title( main_window, " Rounds " ); /* Initialize the working row. */ yy = 4; mvwprintw( main_window, yy++, tab1, "This is the number of times to run the wipe method on each device." ); yy++; if( focus > 0 ) { /* Print this line last so that the cursor is in the right place. */ mvwprintw( main_window, 2, tab1, "> %i", focus ); } else { mvwprintw( main_window, yy++, tab1, "The number of rounds must be a non-negative integer." ); /* Print this line last so that the cursor is in the right place. */ mvwprintw( main_window, 2, tab1, "> " ); } /* Reveal the cursor. */ curs_set( 1 ); /* Refresh the window. */ wrefresh( main_window ); /* Wait 250ms for input from getch, if nothing getch will then continue, * This is necessary so that the while loop can be exited by the * terminate_signal e.g.. the user pressing control-c to exit. * Do not change this value, a higher value means the keys become * sluggish, any slower and more time is spent unnecessarily looping * which wastes CPU cycles. */ timeout( 250 ); // block getch() for 250ms. keystroke = getch(); // Get a keystroke. timeout( -1 ); // Switch back to blocking mode. switch( keystroke ) { case '0': case '1': case '2': case '3': case '4': case '5': case '6': case '7': case '8': case '9': if( focus < 100000000 ) { /* Left shift, base ten. */ focus *= 10; /* This assumes ASCII input, where the zero character is 0x30. */ focus += keystroke - 48; } break; /* Escape key. */ case 27: return; case KEY_BACKSPACE: case KEY_LEFT: case 127: /* Right shift, base ten. */ focus /= 10; break; } /* switch keystroke */ /* Hide the cursor. */ curs_set( 0 ); } while( keystroke != 10 && terminate_signal != 1 ); if( focus > 0 ) { /* Set the number of rounds. */ nwipe_options.rounds = focus; } } /* nwipe_guid_rounds */ void nwipe_gui_prng( void ) { /** * Allows the user to change the PRNG. * * @modifies nwipe_options.prng * @modifies main_window * */ extern nwipe_prng_t nwipe_twister; extern nwipe_prng_t nwipe_isaac; extern nwipe_prng_t nwipe_isaac64; extern nwipe_prng_t nwipe_aes_ctr_prng; extern nwipe_prng_t nwipe_xoroshiro256_prng; extern nwipe_prng_t nwipe_add_lagg_fibonacci_prng; extern int terminate_signal; /* The number of implemented PRNGs. */ const int count = 5; /* The first tabstop. */ const int tab1 = 2; /* The second tabstop. */ const int tab2 = 30; /* Set the initial focus. */ int focus = 0; /* The current working row. */ int yy; /* Input buffer. */ int keystroke; /* Update the footer window. */ werase( footer_window ); nwipe_gui_title( footer_window, selection_footer ); wrefresh( footer_window ); if( nwipe_options.prng == &nwipe_twister ) { focus = 0; } if( nwipe_options.prng == &nwipe_isaac ) { focus = 1; } if( nwipe_options.prng == &nwipe_isaac64 ) { focus = 2; } if( nwipe_options.prng == &nwipe_add_lagg_fibonacci_prng ) { focus = 3; } if( nwipe_options.prng == &nwipe_xoroshiro256_prng ) { focus = 4; } do { /* Clear the main window. */ werase( main_window ); nwipe_gui_create_all_windows_on_terminal_resize( 0, selection_footer ); /* Initialize the working row. */ yy = 3; /* Print the options. */ mvwprintw( main_window, yy++, tab1, " %s", nwipe_twister.label ); mvwprintw( main_window, yy++, tab1, " %s", nwipe_isaac.label ); mvwprintw( main_window, yy++, tab1, " %s", nwipe_isaac64.label ); mvwprintw( main_window, yy++, tab1, " %s", nwipe_add_lagg_fibonacci_prng.label ); mvwprintw( main_window, yy++, tab1, " %s", nwipe_xoroshiro256_prng.label ); yy++; /* Print the cursor. */ mvwaddch( main_window, 3 + focus, tab1, ACS_RARROW ); switch( focus ) { case 0: mvwprintw( main_window, yy++, tab1, "The Mersenne Twister, by Makoto Matsumoto and Takuji Nishimura, is a " ); mvwprintw( main_window, yy++, tab1, "generalized feedback shift register PRNG that is uniform and " ); mvwprintw( main_window, yy++, tab1, "equidistributed in 623-dimensions with a proven period of 2^19937-1. " ); mvwprintw( main_window, yy++, tab1, " " ); mvwprintw( main_window, yy++, tab1, "This implementation passes the Marsaglia Diehard test suite. " ); mvwprintw( main_window, yy++, tab1, " " ); break; case 1: mvwprintw( main_window, yy++, tab1, "ISAAC, by Bob Jenkins, is a PRNG derived from RC4 with a minimum period of " ); mvwprintw( main_window, yy++, tab1, "2^40 and an expected period of 2^8295. It is difficult to recover the " ); mvwprintw( main_window, yy++, tab1, "initial PRNG state by cryptanalysis of the ISAAC stream. " ); mvwprintw( main_window, yy++, tab1, " " ); mvwprintw( main_window, yy++, tab1, "Performs best on a 32-bit CPU. Use ISAAC-64 if this system has a 64-bit CPU." ); break; case 2: mvwprintw( main_window, yy++, tab1, "ISAAC-64, by Bob Jenkins, is like 32-bit ISAAC, but with a minimum period of" ); mvwprintw( main_window, yy++, tab1, "2^77 and an expected period of 2^16583. It is difficult to recover the " ); mvwprintw( main_window, yy++, tab1, "initial PRNG state by cryptanalysis of the ISAAC-64 stream. " ); mvwprintw( main_window, yy++, tab1, " " ); mvwprintw( main_window, yy++, tab1, "Performs best on a 64-bit CPU. Use ISAAC if this system has a 32-bit CPU. " ); break; case 3: mvwprintw( main_window, yy++, tab1, "ALFG (Additive Lagged Fibonacci Generator), is a class of PRNGs utilizing" ); mvwprintw( main_window, yy++, tab1, "the Fibonacci sequence with additive operations between lagged values. While" ); mvwprintw( main_window, yy++, tab1, "they offer a good balance between speed and randomness, it's important to note" ); mvwprintw( main_window, yy++, tab1, "that they provide lower levels of security, making them less suitable for" ); mvwprintw( main_window, yy++, tab1, "cryptographic applications. Their periodicity depends on the choice of lags" ); mvwprintw( main_window, yy++, tab1, "and arithmetic operations, potentially achieving large values, often 2^N or" ); mvwprintw( main_window, yy++, tab1, "higher, where N is the bit length of the states. " ); mvwprintw( main_window, yy++, tab1, " " ); mvwprintw( main_window, yy++, tab1, "Efficient on CPUs of any bit width, particularly suited for non-cryptographic" ); mvwprintw( main_window, yy++, tab1, "applications requiring long sequences with a good speed-randomness trade-off. " ); break; case 4: mvwprintw( main_window, yy++, tab1, "Xoroshiro256**, originally designed by David Blackman and Sebastiano Vigna" ); mvwprintw( main_window, yy++, tab1, "for 128 bits, was adapted to 256 bits by Fabian Druschke. This adaptation " ); mvwprintw( main_window, yy++, tab1, "enhances its capability for fast, high-quality generation of pseudo-random " ); mvwprintw( main_window, yy++, tab1, "numbers with a state size of 256 bits. It boasts an extremely long period " ); mvwprintw( main_window, yy++, tab1, "of 2^256-1 without sacrificing performance, suitable for a wide range of " ); mvwprintw( main_window, yy++, tab1, "applications. " ); mvwprintw( main_window, yy++, tab1, " " ); mvwprintw( main_window, yy++, tab1, "The simple arithmetic operations (shifts, rotations, and XORs) of " ); mvwprintw( main_window, yy++, tab1, "Xoroshiro256** ensure low computational complexity. This, combined with " ); mvwprintw( main_window, yy++, tab1, "the adaptation for 256 bits by Fabian Druschke, allows efficient use " ); mvwprintw( main_window, yy++, tab1, "especially for legacy systems, due to its efficiency and minimal demands. " ); break; } /* switch */ /* Add a border. */ box( main_window, 0, 0 ); /* Add a title. */ nwipe_gui_title( main_window, " Pseudo Random Number Generator " ); /* Refresh the window. */ wrefresh( main_window ); /* Wait 250ms for input from getch, if nothing getch will then continue, * This is necessary so that the while loop can be exited by the * terminate_signal e.g.. the user pressing control-c to exit. * Do not change this value, a higher value means the keys become * sluggish, any slower and more time is spent unnecessarily looping * which wastes CPU cycles. */ timeout( 250 ); // block getch() for 250ms. keystroke = getch(); // Get a keystroke. timeout( -1 ); // Switch back to blocking mode. switch( keystroke ) { case KEY_DOWN: case 'j': case 'J': if( focus < count - 1 ) { focus += 1; } break; case KEY_UP: case 'k': case 'K': if( focus > 0 ) { focus -= 1; } break; case KEY_ENTER: case ' ': case 10: if( focus == 0 ) { nwipe_options.prng = &nwipe_twister; } if( focus == 1 ) { nwipe_options.prng = &nwipe_isaac; } if( focus == 2 ) { nwipe_options.prng = &nwipe_isaac64; } if( focus == 3 ) { nwipe_options.prng = &nwipe_add_lagg_fibonacci_prng; } if( focus == 4 ) { nwipe_options.prng = &nwipe_xoroshiro256_prng; } return; case KEY_BACKSPACE: case KEY_BREAK: return; } /* switch */ } while( terminate_signal != 1 ); } /* nwipe_gui_prng */ void nwipe_gui_verify( void ) { /** * Allows the user to change the verification option. * * @modifies nwipe_options.verify * @modifies main_window * */ extern int terminate_signal; /* The number of definitions in the nwipe_verify_t enumeration. */ const int count = 3; /* The first tabstop. */ const int tab1 = 2; /* The second tabstop. */ const int tab2 = 30; /* Set the initial focus. */ int focus = nwipe_options.verify; /* The current working row. */ int yy; /* Input buffer. */ int keystroke; /* Update the footer window. */ werase( footer_window ); nwipe_gui_title( footer_window, selection_footer ); wrefresh( footer_window ); do { nwipe_gui_create_all_windows_on_terminal_resize( 0, selection_footer ); /* Clear the main window. */ werase( main_window ); /* Initialize the working row. */ yy = 2; /* Print the options. */ mvwprintw( main_window, yy++, tab1, " Verification Off " ); mvwprintw( main_window, yy++, tab1, " Verify Last Pass " ); mvwprintw( main_window, yy++, tab1, " Verify All Passes " ); mvwprintw( main_window, yy++, tab1, " " ); /* Print the cursor. */ mvwaddch( main_window, 2 + focus, tab1, ACS_RARROW ); switch( focus ) { case 0: mvwprintw( main_window, yy++, tab1, "Do not verify passes. The wipe will be a write-only operation. " ); mvwprintw( main_window, yy++, tab1, " " ); break; case 1: mvwprintw( main_window, yy++, tab1, "Check whether the device is actually empty after the last pass fills the " ); mvwprintw( main_window, yy++, tab1, "device with zeros. " ); break; case 2: mvwprintw( main_window, yy++, tab1, "After every pass, read back the pattern and check whether it is correct. " ); mvwprintw( main_window, yy++, tab1, " " ); mvwprintw( main_window, yy++, tab1, "This program writes the entire length of the device before it reads back " ); mvwprintw( main_window, yy++, tab1, "for verification, even for random pattern passes, to better ensure that " ); mvwprintw( main_window, yy++, tab1, "hardware caches are actually flushed. " ); break; } /* switch */ /* Add a border. */ box( main_window, 0, 0 ); /* Add a title. */ nwipe_gui_title( main_window, " Verification Mode " ); /* Refresh the window. */ wrefresh( main_window ); /* Wait 250ms for input from getch, if nothing getch will then continue, * This is necessary so that the while loop can be exited by the * terminate_signal e.g.. the user pressing control-c to exit. * Do not change this value, a higher value means the keys become * sluggish, any slower and more time is spent unnecessarily looping * which wastes CPU cycles. */ timeout( 250 ); // block getch() for 250ms. keystroke = getch(); // Get a keystroke. timeout( -1 ); // Switch back to blocking mode. switch( keystroke ) { case KEY_DOWN: case 'j': case 'J': if( focus < count - 1 ) { focus += 1; } break; case KEY_UP: case 'k': case 'K': if( focus > 0 ) { focus -= 1; } break; case KEY_ENTER: case ' ': case 10: if( focus >= 0 && focus < count ) { nwipe_options.verify = focus; } return; case KEY_BACKSPACE: case KEY_BREAK: return; } /* switch */ } while( terminate_signal != 1 ); } /* nwipe_gui_verify */ void nwipe_gui_noblank( void ) { /** * Allows the user to change the verification option. * * @modifies nwipe_options.noblank * @modifies main_window * */ extern int terminate_signal; /* The number of options available. */ const int count = 2; /* The first tabstop. */ const int tab1 = 2; /* The second tabstop. */ const int tab2 = 40; /* Set the initial focus. */ int focus = nwipe_options.noblank; /* The current working row. */ int yy; /* Input buffer. */ int keystroke; /* Update the footer window. */ werase( footer_window ); nwipe_gui_title( footer_window, selection_footer ); wrefresh( footer_window ); do { nwipe_gui_create_all_windows_on_terminal_resize( 0, selection_footer ); /* Clear the main window. */ werase( main_window ); /* Initialize the working row. */ yy = 2; /* Print the options. */ mvwprintw( main_window, yy++, tab1, " Perform a final blanking pass " ); mvwprintw( main_window, yy++, tab1, " Do not perform final blanking pass " ); mvwprintw( main_window, yy++, tab1, " " ); /* Print the cursor. */ mvwaddch( main_window, 2 + focus, tab1, ACS_RARROW ); switch( focus ) { case 0: mvwprintw( main_window, yy++, tab1, "Perform a final blanking pass after the wipe, leaving disk with only zeros. " ); mvwprintw( main_window, yy++, tab1, "Note that the RCMP TSSIT OPS-II method never blanks the device regardless " ); mvwprintw( main_window, yy++, tab1, "of this setting. " ); mvwprintw( main_window, yy++, tab1, " " ); break; case 1: mvwprintw( main_window, yy++, tab1, "Do not perform a final blanking pass. Leave data as per final wiping pass. " ); mvwprintw( main_window, yy++, tab1, "Note that the RCMP TSSIT OPS-II method never blanks the device regardless " ); mvwprintw( main_window, yy++, tab1, "of this setting. " ); mvwprintw( main_window, yy++, tab1, " " ); break; } /* switch */ /* Add a border. */ box( main_window, 0, 0 ); /* Add a title. */ nwipe_gui_title( main_window, " Final Blanking Pass " ); /* Refresh the window. */ wrefresh( main_window ); /* Wait 250ms for input from getch, if nothing getch will then continue, * This is necessary so that the while loop can be exited by the * terminate_signal e.g.. the user pressing control-c to exit. * Do not change this value, a higher value means the keys become * sluggish, any slower and more time is spent unnecessarily looping * which wastes CPU cycles. */ timeout( 250 ); // block getch() for 250ms. keystroke = getch(); // Get a keystroke. timeout( -1 ); // Switch back to blocking mode. switch( keystroke ) { case KEY_DOWN: case 'j': case 'J': if( focus < count - 1 ) { focus += 1; } break; case KEY_UP: case 'k': case 'K': if( focus > 0 ) { focus -= 1; } break; case KEY_ENTER: case ' ': case 10: if( focus >= 0 && focus < count ) { nwipe_options.noblank = focus; } return; case KEY_BACKSPACE: case KEY_BREAK: return; } /* switch */ } while( terminate_signal != 1 ); } /* nwipe_gui_noblank */ void nwipe_gui_method( void ) { /** * Allows the user to change the wipe method. * * @modifies nwipe_options.method * @modifies main_window * */ extern int terminate_signal; /* The number of implemented methods. */ const int count = 10; /* The first tabstop. */ const int tab1 = 2; /* The second tabstop. */ const int tab2 = 30; /* The currently selected method. */ int focus = 0; /* The current working row. */ int yy; /* Input buffer. */ int keystroke; /* Update the footer window. */ werase( footer_window ); nwipe_gui_title( footer_window, selection_footer ); wrefresh( footer_window ); if( nwipe_options.method == &nwipe_zero ) { focus = 0; } if( nwipe_options.method == &nwipe_one ) { focus = 1; } if( nwipe_options.method == &nwipe_ops2 ) { focus = 2; } if( nwipe_options.method == &nwipe_dodshort ) { focus = 3; } if( nwipe_options.method == &nwipe_dod522022m ) { focus = 4; } if( nwipe_options.method == &nwipe_gutmann ) { focus = 5; } if( nwipe_options.method == &nwipe_random ) { focus = 6; } if( nwipe_options.method == &nwipe_verify_zero ) { focus = 7; } if( nwipe_options.method == &nwipe_verify_one ) { focus = 8; } if( nwipe_options.method == &nwipe_is5enh ) { focus = 9; } do { /* Clear the main window. */ werase( main_window ); nwipe_gui_create_all_windows_on_terminal_resize( 0, selection_footer ); /* Initialize the working row. */ yy = 2; /* Print the options. */ mvwprintw( main_window, yy++, tab1, " %s", nwipe_method_label( &nwipe_zero ) ); mvwprintw( main_window, yy++, tab1, " %s", nwipe_method_label( &nwipe_one ) ); mvwprintw( main_window, yy++, tab1, " %s", nwipe_method_label( &nwipe_ops2 ) ); mvwprintw( main_window, yy++, tab1, " %s", nwipe_method_label( &nwipe_dodshort ) ); mvwprintw( main_window, yy++, tab1, " %s", nwipe_method_label( &nwipe_dod522022m ) ); mvwprintw( main_window, yy++, tab1, " %s", nwipe_method_label( &nwipe_gutmann ) ); mvwprintw( main_window, yy++, tab1, " %s", nwipe_method_label( &nwipe_random ) ); mvwprintw( main_window, yy++, tab1, " %s", nwipe_method_label( &nwipe_verify_zero ) ); mvwprintw( main_window, yy++, tab1, " %s", nwipe_method_label( &nwipe_verify_one ) ); mvwprintw( main_window, yy++, tab1, " %s", nwipe_method_label( &nwipe_is5enh ) ); mvwprintw( main_window, yy++, tab1, " " ); /* Print the cursor. */ mvwaddch( main_window, 2 + focus, tab1, ACS_RARROW ); switch( focus ) { case 0: mvwprintw( main_window, 2, tab2, "Security Level: high (1 pass)" ); mvwprintw( main_window, 4, tab2, "This method fills the device with zeros. Note " ); mvwprintw( main_window, 5, tab2, "that the rounds option does not apply to this " ); mvwprintw( main_window, 6, tab2, "method. This method always runs one round. " ); mvwprintw( main_window, 7, tab2, " " ); mvwprintw( main_window, 8, tab2, "There is no publicly available evidence that " ); mvwprintw( main_window, 9, tab2, "data can be recovered from a modern traditional " ); mvwprintw( main_window, 10, tab2, "hard drive (HDD) that has been zero wiped, " ); mvwprintw( main_window, 11, tab2, "however a wipe that includes a prng may be " ); mvwprintw( main_window, 12, tab2, "preferable. " ); break; case 1: mvwprintw( main_window, 2, tab2, "Security Level: high (1 pass)" ); mvwprintw( main_window, 4, tab2, "This method fills the device with ones. Note that" ); mvwprintw( main_window, 5, tab2, "the rounds option does not apply to this method. " ); mvwprintw( main_window, 6, tab2, "This method always runs one round. " ); mvwprintw( main_window, 7, tab2, " " ); mvwprintw( main_window, 8, tab2, "This method might be used when wiping a solid " ); mvwprintw( main_window, 9, tab2, "state drive if an additional level of security is" ); mvwprintw( main_window, 10, tab2, "required beyond using the drives internal secure " ); mvwprintw( main_window, 11, tab2, "erase features. Alternatively PRNG may be " ); mvwprintw( main_window, 12, tab2, "preferable. " ); break; case 2: mvwprintw( main_window, 2, tab2, "Security Level: higher (8 passes)" ); mvwprintw( main_window, 4, tab2, "The Royal Canadian Mounted Police Technical " ); mvwprintw( main_window, 5, tab2, "Security Standard for Information Technology. " ); mvwprintw( main_window, 6, tab2, "Appendix OPS-II: Media Sanitization. " ); mvwprintw( main_window, 7, tab2, " " ); mvwprintw( main_window, 8, tab2, "This implementation, with regards to paragraph 2 " ); mvwprintw( main_window, 9, tab2, "section A of the standard, uses a pattern that is" ); mvwprintw( main_window, 10, tab2, "one random byte and that is changed each round. " ); break; case 3: mvwprintw( main_window, 2, tab2, "Security Level: higher (3 passes)" ); mvwprintw( main_window, 4, tab2, "The US Department of Defense 5220.22-M short wipe" ); mvwprintw( main_window, 5, tab2, "This method is composed of passes 1, 2 & 7 from " ); mvwprintw( main_window, 6, tab2, "the standard DoD 5220.22-M wipe. " ); mvwprintw( main_window, 7, tab2, " " ); mvwprintw( main_window, 8, tab2, "Pass 1: A random character " ); mvwprintw( main_window, 9, tab2, "Pass 2: The bitwise complement of pass 1. " ); mvwprintw( main_window, 10, tab2, "Pass 3: A random number generated data stream " ); break; case 4: mvwprintw( main_window, 2, tab2, "Security Level: higher (7 passes)" ); mvwprintw( main_window, 3, tab2, "The American Department of Defense 5220.22-M " ); mvwprintw( main_window, 4, tab2, "standard wipe. " ); mvwprintw( main_window, 5, tab2, " " ); mvwprintw( main_window, 6, tab2, "Pass 1: A Random character " ); mvwprintw( main_window, 7, tab2, "Pass 2: The bitwise complement of pass 1 " ); mvwprintw( main_window, 8, tab2, "Pass 3: A random number generated data stream " ); mvwprintw( main_window, 9, tab2, "Pass 4: A Random character " ); mvwprintw( main_window, 10, tab2, "Pass 5: A Random character " ); mvwprintw( main_window, 11, tab2, "Pass 6: The bitwise complement of pass 5 " ); mvwprintw( main_window, 12, tab2, "Pass 7: A random number generated data stream " ); break; case 5: mvwprintw( main_window, 2, tab2, "Security Level: Paranoid ! (35 passes) " ); mvwprintw( main_window, 3, tab2, "Don't waste your time with this on a modern drive" ); mvwprintw( main_window, 5, tab2, "This is the method described by Peter Gutmann in " ); mvwprintw( main_window, 6, tab2, "the paper entitled \"Secure Deletion of Data from" ); mvwprintw( main_window, 7, tab2, "Magnetic and Solid-State Memory\", however not " ); mvwprintw( main_window, 8, tab2, "relevant in regards to modern hard disk drives. " ); break; case 6: mvwprintw( main_window, 2, tab2, "Security Level: Depends on Rounds" ); mvwprintw( main_window, 4, tab2, "This method fills the device with a stream from " ); mvwprintw( main_window, 5, tab2, "the PRNG. It is probably the best method to use " ); mvwprintw( main_window, 6, tab2, "on modern hard disk drives due to variation in " ); mvwprintw( main_window, 7, tab2, "encoding methods. " ); mvwprintw( main_window, 8, tab2, " " ); mvwprintw( main_window, 9, tab2, "This method has a high security level with 1 " ); mvwprintw( main_window, 10, tab2, "round and an increasingly higher security level " ); mvwprintw( main_window, 11, tab2, "as rounds are increased." ); break; case 7: mvwprintw( main_window, 2, tab2, "Security Level: Not applicable" ); mvwprintw( main_window, 4, tab2, "This method only reads the device and checks " ); mvwprintw( main_window, 5, tab2, "that it is all zero. " ); break; case 8: mvwprintw( main_window, 2, tab2, "Security Level: Not applicable" ); mvwprintw( main_window, 4, tab2, "This method only reads the device and checks " ); mvwprintw( main_window, 5, tab2, "that it is all ones (0xFF)." ); break; case 9: mvwprintw( main_window, 2, tab2, "Security Level: higher (3 passes)" ); mvwprintw( main_window, 4, tab2, "HMG IA/IS 5 (Infosec Standard 5): Secure " ); mvwprintw( main_window, 5, tab2, "Sanitisation of Protectively Marked Information " ); mvwprintw( main_window, 6, tab2, "or Sensitive Information " ); mvwprintw( main_window, 7, tab2, " " ); mvwprintw( main_window, 8, tab2, "This method fills the device with 0s, then with " ); mvwprintw( main_window, 9, tab2, "1s, then with a PRNG stream, then reads the " ); mvwprintw( main_window, 10, tab2, "device to verify the PRNG stream was " ); mvwprintw( main_window, 11, tab2, "successfully written. " ); break; } /* switch */ /* Add a border. */ box( main_window, 0, 0 ); /* Add a title. */ nwipe_gui_title( main_window, " Wipe Method " ); /* Refresh the window. */ wrefresh( main_window ); /* Wait 250ms for input from getch, if nothing getch will then continue, * This is necessary so that the while loop can be exited by the * terminate_signal e.g.. the user pressing control-c to exit. * Do not change this value, a higher value means the keys become * sluggish, any slower and more time is spent unnecessarily looping * which wastes CPU cycles. */ timeout( 250 ); /* block getch() for 250ms */ keystroke = getch(); /* Get a keystroke. */ timeout( -1 ); /* Switch back to blocking mode */ switch( keystroke ) { case KEY_DOWN: case 'j': case 'J': if( focus < count - 1 ) { focus += 1; } break; case KEY_UP: case 'k': case 'K': if( focus > 0 ) { focus -= 1; } break; case KEY_BACKSPACE: case KEY_BREAK: return; } /* switch */ } while( keystroke != KEY_ENTER && keystroke != ' ' && keystroke != 10 && terminate_signal != 1 ); switch( focus ) { case 0: nwipe_options.method = &nwipe_zero; break; case 1: nwipe_options.method = &nwipe_one; break; case 2: nwipe_options.method = &nwipe_ops2; break; case 3: nwipe_options.method = &nwipe_dodshort; break; case 4: nwipe_options.method = &nwipe_dod522022m; break; case 5: nwipe_options.method = &nwipe_gutmann; break; case 6: nwipe_options.method = &nwipe_random; break; case 7: nwipe_options.method = &nwipe_verify_zero; break; case 8: nwipe_options.method = &nwipe_verify_one; break; case 9: nwipe_options.method = &nwipe_is5enh; break; } } /* nwipe_gui_method */ void nwipe_gui_config( void ) { /** * Display the configuration Main Menu selection window * */ extern int terminate_signal; /* Number of entries in the configuration menu. */ const int count = 8; /* The first tabstop. */ const int tab1 = 2; /* The second tabstop. */ const int tab2 = 40; /* The currently selected method. */ int focus = 0; /* The current working row. */ int yy; /* Input buffer. */ int keystroke; do { /* Clear the main window. */ werase( main_window ); /* Update the footer window. */ werase( footer_window ); nwipe_gui_title( footer_window, selection_footer_config ); wrefresh( footer_window ); nwipe_gui_create_all_windows_on_terminal_resize( 0, selection_footer_config ); /* Initialize the working row. */ yy = 2; /* Print the options. */ mvwprintw( main_window, yy++, tab1, " %s", "PDF Report - Enable/Disable " ); mvwprintw( main_window, yy++, tab1, " %s", "PDF Report - Edit Organisation" ); mvwprintw( main_window, yy++, tab1, " %s", "PDF Report - Select Customer " ); mvwprintw( main_window, yy++, tab1, " %s", "PDF Report - Add Customer " ); mvwprintw( main_window, yy++, tab1, " %s", "PDF Report - Delete Customer " ); mvwprintw( main_window, yy++, tab1, " %s", "PDF Report - Preview Details " ); mvwprintw( main_window, yy++, tab1, " %s", "PDF Report - Preview at Start " ); yy++; mvwprintw( main_window, yy++, tab1, " %s", "Set System Date & Time " ); mvwprintw( main_window, yy++, tab1, " " ); /* Print the cursor. */ mvwaddch( main_window, 2 + focus, tab1, ACS_RARROW ); switch( focus ) { case 0: if( nwipe_options.PDF_enable ) { mvwprintw( main_window, 2, tab2, "PDF Report = ENABLED" ); } else { mvwprintw( main_window, 2, tab2, "PDF Report = DISABLED" ); } mvwprintw( main_window, 4, tab2, "Enable or Disable creation of the PDF " ); mvwprintw( main_window, 5, tab2, "report/certificate " ); break; case 1: mvwprintw( main_window, 2, tab2, "PDF Report - Edit Organisation" ); mvwprintw( main_window, 4, tab2, "This option allows you to edit details" ); mvwprintw( main_window, 5, tab2, "of the organisation that is performing" ); mvwprintw( main_window, 6, tab2, "the erasure. This includes: business " ); mvwprintw( main_window, 7, tab2, "name, business address, contact name " ); mvwprintw( main_window, 8, tab2, "and contact phone. " ); break; case 2: mvwprintw( main_window, 2, tab2, "PDF Report - Select Customer" ); mvwprintw( main_window, 4, tab2, "Allows selection of a customer as " ); mvwprintw( main_window, 5, tab2, "displayed on the PDF report. Customer " ); mvwprintw( main_window, 6, tab2, "information includes Name (This can be" ); mvwprintw( main_window, 7, tab2, "a personal or business name), address " ); mvwprintw( main_window, 8, tab2, "contact name and contact phone. " ); mvwprintw( main_window, 9, tab2, " " ); mvwprintw( main_window, 10, tab2, "Customer data is located in: " ); mvwprintw( main_window, 11, tab2, "/etc/nwipe/nwipe_customers.csv " ); break; case 3: mvwprintw( main_window, 2, tab2, "PDF Report - Add Customer " ); mvwprintw( main_window, 4, tab2, "This option allows you to add a new " ); mvwprintw( main_window, 5, tab2, "customer. A customer can be optionally" ); mvwprintw( main_window, 6, tab2, "displayed on the PDF report. Customer " ); mvwprintw( main_window, 7, tab2, "information includes Name (This can be" ); mvwprintw( main_window, 8, tab2, "a personal or business name), address " ); mvwprintw( main_window, 9, tab2, "contact name and contact phone. " ); mvwprintw( main_window, 10, tab2, " " ); mvwprintw( main_window, 11, tab2, "Customer data is saved in: " ); mvwprintw( main_window, 12, tab2, "/etc/nwipe/nwipe_customers.csv " ); break; case 4: mvwprintw( main_window, 2, tab2, "PDF Report - Delete Customer " ); mvwprintw( main_window, 4, tab2, "This option allows you to delete a " ); mvwprintw( main_window, 5, tab2, "customer. A customer can be optionally" ); mvwprintw( main_window, 6, tab2, "displayed on the PDF report. Customer " ); mvwprintw( main_window, 7, tab2, "information includes Name (This can be" ); mvwprintw( main_window, 8, tab2, "a personal or business name), address " ); mvwprintw( main_window, 9, tab2, "contact name and contact phone. " ); mvwprintw( main_window, 10, tab2, " " ); mvwprintw( main_window, 11, tab2, "Customer data is saved in: " ); mvwprintw( main_window, 12, tab2, "/etc/nwipe/nwipe_customers.csv " ); break; case 5: mvwprintw( main_window, 2, tab2, "PDF Report - Preview Organisation, " ); mvwprintw( main_window, 3, tab2, "Customer and Date/Time details " ); mvwprintw( main_window, 5, tab2, "This allows the above information to " ); mvwprintw( main_window, 6, tab2, "be checked prior to starting the wipe " ); mvwprintw( main_window, 7, tab2, "so that the information is correct on " ); mvwprintw( main_window, 8, tab2, "the pdf report. " ); break; case 6: if( nwipe_options.PDF_preview_details ) { mvwprintw( main_window, 2, tab2, "Preview Org. & Customer at start = ENABLED" ); } else { mvwprintw( main_window, 2, tab2, "Preview Org. & Customer at start = DISABLED" ); } mvwprintw( main_window, 4, tab2, "A preview prior to the drive selection" ); mvwprintw( main_window, 5, tab2, "of the organisation that is performing" ); mvwprintw( main_window, 6, tab2, "the wipe, the customer details and the" ); mvwprintw( main_window, 7, tab2, "current date and time in order to " ); mvwprintw( main_window, 8, tab2, "confirm that the information is " ); mvwprintw( main_window, 9, tab2, "correct on the pdf report prior to " ); mvwprintw( main_window, 10, tab2, "drive selection and starting the erase" ); break; case 8: mvwprintw( main_window, 2, tab2, "Set System Date & Time " ); mvwprintw( main_window, 4, tab2, "Useful when host is not connected to " ); mvwprintw( main_window, 5, tab2, "the internet and not running the 'ntp'" ); mvwprintw( main_window, 6, tab2, "(network time protocol). " ); break; } /* switch */ /* Add a border. */ box( main_window, 0, 0 ); /* Add a title. */ nwipe_gui_title( main_window, " Configuration " ); /* Refresh the window. */ wrefresh( main_window ); /* Wait 250ms for input from getch, if nothing getch will then continue, * This is necessary so that the while loop can be exited by the * terminate_signal e.g.. the user pressing control-c to exit. * Do not change this value, a higher value means the keys become * sluggish, any slower and more time is spent unnecessarily looping * which wastes CPU cycles. */ timeout( 250 ); /* block getch() for 250ms */ keystroke = getch(); /* Get a keystroke. */ timeout( -1 ); /* Switch back to blocking mode */ switch( keystroke ) { case KEY_DOWN: case 'j': case 'J': if( focus < count - 1 ) { if( focus == 6 ) { focus += 2; /* mind the gaps */ } else { focus += 1; } } break; case KEY_UP: case 'k': case 'K': if( focus > 0 ) { if( focus == 8 ) { focus -= 2; /* mind the gaps */ } else { focus -= 1; } } break; case KEY_BACKSPACE: case KEY_BREAK: case 27: /* ESC */ return; } /* switch */ if( keystroke == 0x0A ) { switch( focus ) { case 0: /* Toggle on pressing ENTER key */ if( nwipe_options.PDF_enable == 0 ) { nwipe_options.PDF_enable = 1; /* write the setting to nwipe.conf */ nwipe_conf_update_setting( "PDF_Certificate.PDF_Enable", "ENABLED" ); } else { nwipe_options.PDF_enable = 0; /* write the setting to nwipe.conf */ nwipe_conf_update_setting( "PDF_Certificate.PDF_Enable", "DISABLED" ); } break; case 1: nwipe_gui_edit_organisation(); break; case 2: customer_processes( SELECT_CUSTOMER ); break; case 3: nwipe_gui_add_customer(); break; case 4: customer_processes( DELETE_CUSTOMER ); break; case 5: nwipe_gui_preview_org_customer( SHOWING_IN_CONFIG_MENUS ); break; case 6: /* Toggle on pressing ENTER key */ if( nwipe_options.PDF_preview_details == 0 ) { nwipe_options.PDF_preview_details = 1; /* write the setting to nwipe.conf */ nwipe_conf_update_setting( "PDF_Certificate.PDF_Preview", "ENABLED" ); } else { nwipe_options.PDF_preview_details = 0; /* write the setting to nwipe.conf */ nwipe_conf_update_setting( "PDF_Certificate.PDF_Preview", "DISABLED" ); } break; case 8: nwipe_gui_set_date_time(); break; } keystroke = -1; } } while( keystroke != KEY_ENTER && /* keystroke != ' ' && */ keystroke != 10 && terminate_signal != 1 ); } /* end of nwipe_config() */ void nwipe_gui_edit_organisation( void ) { /** * Display the list of organisation details available for editing * */ extern int terminate_signal; /* Number of entries in the configuration menu. */ const int count = 5; /* The first tabstop. */ const int tab1 = 2; /* The second tabstop. */ const int tab2 = 27; /* The currently selected method. */ int focus = 0; /* The current working row. */ int yy; /* Input buffer. */ int keystroke; /* variables used by libconfig for extracting data from nwipe.conf */ config_setting_t* setting; const char *business_name, *business_address, *contact_name, *contact_phone, *op_tech_name; extern config_t nwipe_cfg; do { do { /* Clear the main window. */ werase( main_window ); /* Update the footer window. */ werase( footer_window ); nwipe_gui_title( footer_window, selection_footer_config ); wrefresh( footer_window ); nwipe_gui_create_all_windows_on_terminal_resize( 0, selection_footer_config ); /* Initialize the working row. */ yy = 2; /* Print the options. */ mvwprintw( main_window, yy++, tab1, " %s", "Edit Business Name" ); mvwprintw( main_window, yy++, tab1, " %s", "Edit Business Address" ); mvwprintw( main_window, yy++, tab1, " %s", "Edit Contact Name" ); mvwprintw( main_window, yy++, tab1, " %s", "Edit Contact Phone" ); mvwprintw( main_window, yy++, tab1, " %s", "Edit Tech/Operator" ); mvwprintw( main_window, yy++, tab1, " " ); /* Print the cursor. */ mvwaddch( main_window, 2 + focus, tab1, ACS_RARROW ); /* libconfig: Locate the Organisation Details section in nwipe.conf */ setting = config_lookup( &nwipe_cfg, "Organisation_Details" ); /* Retrieve data from nwipe.conf */ if( config_setting_lookup_string( setting, "Business_Name", &business_name ) ) { mvwprintw( main_window, 2, tab2, ": %s", business_name ); } else { mvwprintw( main_window, 2, tab2, ": Cannot retrieve business_name, nwipe.conf" ); } /* Retrieve data from nwipe.conf */ if( config_setting_lookup_string( setting, "Business_Address", &business_address ) ) { mvwprintw( main_window, 3, tab2, ": %s", business_address ); } else { mvwprintw( main_window, 3, tab2, ": Cannot retrieve business address, nwipe.conf" ); } /* Retrieve data from nwipe.conf */ if( config_setting_lookup_string( setting, "Contact_Name", &contact_name ) ) { mvwprintw( main_window, 4, tab2, ": %s", contact_name ); } else { mvwprintw( main_window, 4, tab2, ": Cannot retrieve contact name, nwipe.conf" ); } /* Retrieve data from nwipe.conf */ if( config_setting_lookup_string( setting, "Contact_Phone", &contact_phone ) ) { mvwprintw( main_window, 5, tab2, ": %s", contact_phone ); } else { mvwprintw( main_window, 5, tab2, ": Cannot retrieve contact phone, nwipe.conf" ); } /* Retrieve data from nwipe.conf */ if( config_setting_lookup_string( setting, "Op_Tech_Name", &op_tech_name ) ) { mvwprintw( main_window, 6, tab2, ": %s", op_tech_name ); } else { mvwprintw( main_window, 6, tab2, ": Cannot retrieve op_tech_name, nwipe.conf" ); } /* Add a border. */ box( main_window, 0, 0 ); /* Add a title. */ nwipe_gui_title( main_window, " PDF Report - Edit Organisation " ); /* Refresh the window. */ wrefresh( main_window ); /* Wait 250ms for input from getch, if nothing getch will then continue, * This is necessary so that the while loop can be exited by the * terminate_signal e.g.. the user pressing control-c to exit. * Do not change this value, a higher value means the keys become * sluggish, any slower and more time is spent unnecessarily looping * which wastes CPU cycles. */ timeout( 250 ); /* block getch() for 250ms */ keystroke = getch(); /* Get a keystroke. */ timeout( -1 ); /* Switch back to blocking mode */ switch( keystroke ) { case KEY_DOWN: case 'j': case 'J': if( focus < count - 1 ) { focus += 1; } break; case KEY_UP: case 'k': case 'K': if( focus > 0 ) { focus -= 1; } break; case KEY_BACKSPACE: case KEY_BREAK: case 27: /* ESC */ return; } /* switch */ } while( keystroke != KEY_ENTER && keystroke != 10 && terminate_signal != 1 ); if( keystroke == KEY_ENTER || keystroke == 10 || keystroke == ' ' ) { switch( focus ) { case 0: nwipe_gui_organisation_business_name( business_name ); keystroke = 0; break; case 1: nwipe_gui_organisation_business_address( business_address ); keystroke = 0; break; case 2: nwipe_gui_organisation_contact_name( contact_name ); keystroke = 0; break; case 3: nwipe_gui_organisation_contact_phone( contact_phone ); keystroke = 0; break; case 4: nwipe_gui_organisation_op_tech_name( op_tech_name ); keystroke = 0; break; } } } while( keystroke != KEY_ENTER && keystroke != 10 && terminate_signal != 1 ); } /* end of nwipe_gui_edit_organisation( void ) */ void nwipe_gui_organisation_business_name( const char* business_name ) { /** * Allows the user to change the organisation business name as displayed on the PDF report. * * @modifies business_name in nwipe.conf * @modifies main_window * */ /* The first tabstop. */ const int tab1 = 2; /* The current working row. */ int yy; /* Input buffer. */ int keystroke; /* buffer */ char buffer[256] = ""; /* buffer index */ int idx = 0; extern int terminate_signal; /* variables used by libconfig for inserting data into nwipe.conf */ config_setting_t* setting; // const char* business_name; extern config_t nwipe_cfg; extern char nwipe_config_file[]; /* Update the footer window. */ werase( footer_window ); nwipe_gui_title( footer_window, selection_footer_text_entry ); wrefresh( footer_window ); /* Copy the current business name to the buffer */ strcpy( buffer, business_name ); /* Set the buffer index to point to the end of the string, i.e the NULL */ idx = strlen( buffer ); do { /* Erase the main window. */ werase( main_window ); nwipe_gui_create_all_windows_on_terminal_resize( 0, selection_footer_text_entry ); /* Add a border. */ box( main_window, 0, 0 ); /* Add a title. */ nwipe_gui_title( main_window, " Edit Organisation Business Name " ); /* Initialize the working row. */ yy = 4; mvwprintw( main_window, yy++, tab1, "Enter the business name of the organisation performing the erasure" ); /* Print this line last so that the cursor is in the right place. */ mvwprintw( main_window, 2, tab1, ">%s", buffer ); /* Reveal the cursor. */ curs_set( 1 ); /* Refresh the window. */ wrefresh( main_window ); /* Wait 250ms for input from getch, if nothing getch will then continue, * This is necessary so that the while loop can be exited by the * terminate_signal e.g.. the user pressing control-c to exit. * Do not change this value, a higher value means the keys become * sluggish, any slower and more time is spent unnecessarily looping * which wastes CPU cycles. */ timeout( 250 ); // block getch() for 250ms. keystroke = getch(); // Get a keystroke. timeout( -1 ); // Switch back to blocking mode. switch( keystroke ) { /* Escape key. */ case 27: return; case KEY_BACKSPACE: case KEY_LEFT: case 127: if( idx > 0 ) { buffer[--idx] = 0; } break; } /* switch keystroke */ if( ( keystroke >= ' ' && keystroke <= '~' ) && keystroke != '\"' && idx < 255 ) { buffer[idx++] = keystroke; buffer[idx] = 0; mvwprintw( main_window, 2, tab1, ">%s", buffer ); } /* Hide the cursor. */ curs_set( 0 ); } while( keystroke != 10 && terminate_signal != 1 ); /* libconfig: Locate the Organisation Details section in nwipe.conf */ if( !( setting = config_lookup( &nwipe_cfg, "Organisation_Details.Business_Name" ) ) ) { nwipe_log( NWIPE_LOG_ERROR, "Failed to locate [Organisation_Details.Business_Name] in %s", nwipe_config_file ); } /* libconfig: Write the new business name */ if( config_setting_set_string( setting, buffer ) == CONFIG_FALSE ) { nwipe_log( NWIPE_LOG_ERROR, "Failed to write [%s] to [Organisation_Details.Business_Name] in %s", buffer, nwipe_config_file ); } /* Write out the new configuration. */ if( config_write_file( &nwipe_cfg, nwipe_config_file ) == CONFIG_FALSE ) { nwipe_log( NWIPE_LOG_ERROR, "Failed to write organisation business name to %s", nwipe_config_file ); } else { nwipe_log( NWIPE_LOG_INFO, "[Success] Business name written to %s", nwipe_config_file ); } } /* End of nwipe_gui_organisation_business_name() */ void nwipe_gui_organisation_business_address( const char* business_address ) { /** * Allows the user to change the organisation business address as displayed on the PDF report. * * @modifies business_address in nwipe.conf * @modifies main_window * */ /* The first tabstop. */ const int tab1 = 2; /* The current working row. */ int yy; /* Input buffer. */ int keystroke; /* buffer */ char buffer[256] = ""; /* buffer index */ int idx = 0; extern int terminate_signal; /* variables used by libconfig for inserting data into nwipe.conf */ config_setting_t* setting; // const char* business_name; extern config_t nwipe_cfg; extern char nwipe_config_file[]; /* Update the footer window. */ werase( footer_window ); nwipe_gui_title( footer_window, selection_footer_text_entry ); wrefresh( footer_window ); /* Copy the current business address to the buffer */ strcpy( buffer, business_address ); /* Set the buffer index to point to the end of the string, i.e the NULL */ idx = strlen( buffer ); do { /* Erase the main window. */ werase( main_window ); nwipe_gui_create_all_windows_on_terminal_resize( 0, selection_footer_text_entry ); /* Add a border. */ box( main_window, 0, 0 ); /* Add a title. */ nwipe_gui_title( main_window, " Edit Organisation Business Address " ); /* Initialize the working row. */ yy = 4; mvwprintw( main_window, yy++, tab1, "Enter the business address of the organisation performing the erasure" ); /* Print this line last so that the cursor is in the right place. */ mvwprintw( main_window, 2, tab1, ">%s", buffer ); /* Reveal the cursor. */ curs_set( 1 ); /* Refresh the window. */ wrefresh( main_window ); /* Wait 250ms for input from getch, if nothing getch will then continue, * This is necessary so that the while loop can be exited by the * terminate_signal e.g.. the user pressing control-c to exit. * Do not change this value, a higher value means the keys become * sluggish, any slower and more time is spent unnecessarily looping * which wastes CPU cycles. */ timeout( 250 ); // block getch() for 250ms. keystroke = getch(); // Get a keystroke. timeout( -1 ); // Switch back to blocking mode. switch( keystroke ) { /* Escape key. */ case 27: return; case KEY_BACKSPACE: case KEY_LEFT: case 127: if( idx > 0 ) { buffer[--idx] = 0; } break; } /* switch keystroke */ if( ( keystroke >= ' ' && keystroke <= '~' ) && keystroke != '\"' && idx < 255 ) { buffer[idx++] = keystroke; buffer[idx] = 0; mvwprintw( main_window, 2, tab1, ">%s", buffer ); } /* Hide the cursor. */ curs_set( 0 ); } while( keystroke != 10 && terminate_signal != 1 ); /* libconfig: Locate the Organisation Details section in nwipe.conf */ if( !( setting = config_lookup( &nwipe_cfg, "Organisation_Details.Business_Address" ) ) ) { nwipe_log( NWIPE_LOG_ERROR, "Failed to locate [Organisation_Details.Business_Address] in %s", nwipe_config_file ); } /* libconfig: Write the new business name */ if( config_setting_set_string( setting, buffer ) == CONFIG_FALSE ) { nwipe_log( NWIPE_LOG_ERROR, "Failed to write [%s] to [Organisation_Details.Business_Address] in %s", buffer, nwipe_config_file ); } /* Write out the new configuration. */ if( config_write_file( &nwipe_cfg, nwipe_config_file ) == CONFIG_FALSE ) { nwipe_log( NWIPE_LOG_ERROR, "Failed to write organisation business address to %s", nwipe_config_file ); } else { nwipe_log( NWIPE_LOG_INFO, "[Success] Business address written to %s", nwipe_config_file ); } } /* End of nwipe_gui_organisation_business_address() */ void nwipe_gui_organisation_contact_name( const char* contact_name ) { /** * Allows the user to change the organisation business address as displayed on the PDF report. * * @modifies business_address in nwipe.conf * @modifies main_window * */ /* The first tabstop. */ const int tab1 = 2; /* The current working row. */ int yy; /* Input buffer. */ int keystroke; /* buffer */ char buffer[256] = ""; /* buffer index */ int idx = 0; extern int terminate_signal; /* variables used by libconfig for inserting data into nwipe.conf */ config_setting_t* setting; // const char* business_name; extern config_t nwipe_cfg; extern char nwipe_config_file[]; /* Update the footer window. */ werase( footer_window ); nwipe_gui_title( footer_window, selection_footer_text_entry ); wrefresh( footer_window ); /* Copy the current business address to the buffer */ strcpy( buffer, contact_name ); /* Set the buffer index to point to the end of the string, i.e the NULL */ idx = strlen( buffer ); do { /* Erase the main window. */ werase( main_window ); nwipe_gui_create_all_windows_on_terminal_resize( 0, selection_footer_text_entry ); /* Add a border. */ box( main_window, 0, 0 ); /* Add a title. */ nwipe_gui_title( main_window, " Edit Organisation Contact Name " ); /* Initialize the working row. */ yy = 4; mvwprintw( main_window, yy++, tab1, "Enter the contact name for the organisation performing the erasure" ); /* Print this line last so that the cursor is in the right place. */ mvwprintw( main_window, 2, tab1, ">%s", buffer ); /* Reveal the cursor. */ curs_set( 1 ); /* Refresh the window. */ wrefresh( main_window ); /* Wait 250ms for input from getch, if nothing getch will then continue, * This is necessary so that the while loop can be exited by the * terminate_signal e.g.. the user pressing control-c to exit. * Do not change this value, a higher value means the keys become * sluggish, any slower and more time is spent unnecessarily looping * which wastes CPU cycles. */ timeout( 250 ); // block getch() for 250ms. keystroke = getch(); // Get a keystroke. timeout( -1 ); // Switch back to blocking mode. switch( keystroke ) { /* Escape key. */ case 27: return; case KEY_BACKSPACE: case KEY_LEFT: case 127: if( idx > 0 ) { buffer[--idx] = 0; } break; } /* switch keystroke */ if( ( keystroke >= ' ' && keystroke <= '~' ) && keystroke != '\"' && idx < 255 ) { buffer[idx++] = keystroke; buffer[idx] = 0; mvwprintw( main_window, 2, tab1, ">%s", buffer ); } /* Hide the cursor. */ curs_set( 0 ); } while( keystroke != 10 && terminate_signal != 1 ); /* libconfig: Locate the Organisation Details section in nwipe.conf */ if( !( setting = config_lookup( &nwipe_cfg, "Organisation_Details.Contact_Name" ) ) ) { nwipe_log( NWIPE_LOG_ERROR, "Failed to locate [Organisation_Details.Contact_Name] in %s", nwipe_config_file ); } /* libconfig: Write the new organisation contact name */ if( config_setting_set_string( setting, buffer ) == CONFIG_FALSE ) { nwipe_log( NWIPE_LOG_ERROR, "Failed to write [%s] to [Organisation_Details.Contact_Name] in %s", buffer, nwipe_config_file ); } /* Write out the new configuration. */ if( config_write_file( &nwipe_cfg, nwipe_config_file ) == CONFIG_FALSE ) { nwipe_log( NWIPE_LOG_ERROR, "Failed to write organisation contact name to %s", nwipe_config_file ); } else { nwipe_log( NWIPE_LOG_INFO, "[Success] Business contact name written to %s", nwipe_config_file ); } } /* End of nwipe_gui_organisation_contact_name() */ void nwipe_gui_organisation_contact_phone( const char* contact_phone ) { /** * Allows the user to change the organisation contact name as displayed on the PDF report. * * @modifies organisation contact name in nwipe.conf * @modifies main_window * */ /* The first tabstop. */ const int tab1 = 2; /* The current working row. */ int yy; /* Input buffer. */ int keystroke; /* buffer */ char buffer[256] = ""; /* buffer index */ int idx = 0; extern int terminate_signal; /* variables used by libconfig for inserting data into nwipe.conf */ config_setting_t* setting; // const char* contact_name; extern config_t nwipe_cfg; extern char nwipe_config_file[]; /* Update the footer window. */ werase( footer_window ); nwipe_gui_title( footer_window, selection_footer_text_entry ); wrefresh( footer_window ); /* Copy the current business address to the buffer */ strcpy( buffer, contact_phone ); /* Set the buffer index to point to the end of the string, i.e the NULL */ idx = strlen( buffer ); do { /* Erase the main window. */ werase( main_window ); nwipe_gui_create_all_windows_on_terminal_resize( 0, selection_footer_text_entry ); /* Add a border. */ box( main_window, 0, 0 ); /* Add a title. */ nwipe_gui_title( main_window, " Edit Organisation Contact Phone " ); /* Initialize the working row. */ yy = 4; mvwprintw( main_window, yy++, tab1, "Enter the contact phone for the organisation performing the erasure" ); /* Print this line last so that the cursor is in the right place. */ mvwprintw( main_window, 2, tab1, ">%s", buffer ); /* Reveal the cursor. */ curs_set( 1 ); /* Refresh the window. */ wrefresh( main_window ); /* Wait 250ms for input from getch, if nothing getch will then continue, * This is necessary so that the while loop can be exited by the * terminate_signal e.g.. the user pressing control-c to exit. * Do not change this value, a higher value means the keys become * sluggish, any slower and more time is spent unnecessarily looping * which wastes CPU cycles. */ timeout( 250 ); // block getch() for 250ms. keystroke = getch(); // Get a keystroke. timeout( -1 ); // Switch back to blocking mode. switch( keystroke ) { /* Escape key. */ case 27: return; case KEY_BACKSPACE: case KEY_LEFT: case 127: if( idx > 0 ) { buffer[--idx] = 0; } break; } /* switch keystroke */ if( ( keystroke >= ' ' && keystroke <= '~' ) && keystroke != '\"' && idx < 255 ) { buffer[idx++] = keystroke; buffer[idx] = 0; mvwprintw( main_window, 2, tab1, ">%s", buffer ); } /* Hide the cursor. */ curs_set( 0 ); } while( keystroke != 10 && terminate_signal != 1 ); /* libconfig: Locate the Organisation Details section in nwipe.conf */ if( !( setting = config_lookup( &nwipe_cfg, "Organisation_Details.Contact_Phone" ) ) ) { nwipe_log( NWIPE_LOG_ERROR, "Failed to locate [Organisation_Details.Contact_Phone] in %s", nwipe_config_file ); } /* libconfig: Write the organistion contact phone */ if( config_setting_set_string( setting, buffer ) == CONFIG_FALSE ) { nwipe_log( NWIPE_LOG_ERROR, "Failed to write [%s] to [Organisation_Details.Contact_Phone] in %s", buffer, nwipe_config_file ); } /* Write out the new configuration. */ if( config_write_file( &nwipe_cfg, nwipe_config_file ) == CONFIG_FALSE ) { nwipe_log( NWIPE_LOG_ERROR, "Failed to write organisation contact phone to %s", nwipe_config_file ); } else { nwipe_log( NWIPE_LOG_INFO, "[Success] Business contact phone written to %s", nwipe_config_file ); } } /* End of nwipe_gui_organisation_contact_phone() */ void nwipe_gui_organisation_op_tech_name( const char* op_tech_name ) { /** * Allows the user to change the organisation contact name as displayed on the PDF report. * * @modifies organisation contact name in nwipe.conf * @modifies main_window * */ /* The first tabstop. */ const int tab1 = 2; /* The current working row. */ int yy; /* Input buffer. */ int keystroke; /* buffer */ char buffer[256] = ""; /* buffer index */ int idx = 0; extern int terminate_signal; /* variables used by libconfig for inserting data into nwipe.conf */ config_setting_t* setting; // const char* contact_name; extern config_t nwipe_cfg; extern char nwipe_config_file[]; /* Update the footer window. */ werase( footer_window ); nwipe_gui_title( footer_window, selection_footer_text_entry ); wrefresh( footer_window ); /* Copy the current op_tech_name to the buffer */ strcpy( buffer, op_tech_name ); /* Set the buffer index to point to the end of the string, i.e the NULL */ idx = strlen( buffer ); do { /* Erase the main window. */ werase( main_window ); nwipe_gui_create_all_windows_on_terminal_resize( 0, selection_footer_text_entry ); /* Add a border. */ box( main_window, 0, 0 ); /* Add a title. */ nwipe_gui_title( main_window, " Edit Operator/Technician Name " ); /* Initialize the working row. */ yy = 4; mvwprintw( main_window, yy++, tab1, "Enter the operator/technician's name that is performing the erasure" ); /* Print this line last so that the cursor is in the right place. */ mvwprintw( main_window, 2, tab1, ">%s", buffer ); /* Reveal the cursor. */ curs_set( 1 ); /* Refresh the window. */ wrefresh( main_window ); /* Wait 250ms for input from getch, if nothing getch will then continue, * This is necessary so that the while loop can be exited by the * terminate_signal e.g.. the user pressing control-c to exit. * Do not change this value, a higher value means the keys become * sluggish, any slower and more time is spent unnecessarily looping * which wastes CPU cycles. */ timeout( 250 ); // block getch() for 250ms. keystroke = getch(); // Get a keystroke. timeout( -1 ); // Switch back to blocking mode. switch( keystroke ) { /* Escape key. */ case 27: return; case KEY_BACKSPACE: case KEY_LEFT: case 127: if( idx > 0 ) { buffer[--idx] = 0; } break; } /* switch keystroke */ if( ( keystroke >= ' ' && keystroke <= '~' ) && keystroke != '\"' && idx < 255 ) { buffer[idx++] = keystroke; buffer[idx] = 0; mvwprintw( main_window, 2, tab1, ">%s", buffer ); } /* Hide the cursor. */ curs_set( 0 ); } while( keystroke != 10 && terminate_signal != 1 ); /* libconfig: Locate the Organisation Details section in nwipe.conf */ if( !( setting = config_lookup( &nwipe_cfg, "Organisation_Details.Op_Tech_Name" ) ) ) { nwipe_log( NWIPE_LOG_ERROR, "Failed to locate [Organisation_Details.Op_Tech_Name] in %s", nwipe_config_file ); } /* libconfig: Write the organistion operator/technician name */ if( config_setting_set_string( setting, buffer ) == CONFIG_FALSE ) { nwipe_log( NWIPE_LOG_ERROR, "Failed to write [%s] to [Organisation_Details.Op_Tech_Name] in %s", buffer, nwipe_config_file ); } /* Write out the new configuration. */ if( config_write_file( &nwipe_cfg, nwipe_config_file ) == CONFIG_FALSE ) { nwipe_log( NWIPE_LOG_ERROR, "Failed to write organisation operator/technician to %s", nwipe_config_file ); } else { nwipe_log( NWIPE_LOG_INFO, "[Success] operator/technician name written to %s", nwipe_config_file ); } } /* End of nwipe_gui_organisation_op_tech_name() */ void nwipe_gui_list( int count, char* window_title, char** list, int* selected_entry ) { /** * Displays a selectable list in a window, return 1 -n in selected entry. * If selected entry = 0, then user cancelled selection. */ extern int terminate_signal; /* The number of lines available in the window. */ int wlines; /* The number of columns available in the window. */ int wcols; /* The number of selection elements that we can show in the window. */ int slots; /* The index of the element that is visible in the first slot. */ int offset = 0; /* The selection focus. */ int focus = 0; /* A generic loop variable. */ int i = 0; /* User input buffer. */ int keystroke; /* The current working line. */ int yy; /* Flag, Valid key hit = 1, anything else = 0 */ int validkeyhit; /* Processed customer entry as displayed in selection dialog */ char* display_line; /* Get the terminal size */ getmaxyx( stdscr, stdscr_lines, stdscr_cols ); /* Save the terminal size so we check whether the user has resized */ stdscr_lines_previous = stdscr_lines; stdscr_cols_previous = stdscr_cols; /* Used to refresh the window every second */ time_t check_time = time( NULL ); /* Used in the selection loop to trap a failure of the timeout(), getch() mechanism to block for the designated * period */ int iteration_counter; /* Used in the selection loop to trap a failure of the timeout(), getch() mechanism to block for the designated * period */ int expected_iterations; /* General Indexes */ int idx, idx2; time_t previous_iteration_timestamp; do { nwipe_gui_create_all_windows_on_terminal_resize( 0, main_window_footer ); /* There is one slot per line. */ getmaxyx( main_window, wlines, wcols ); /* Less two lines for the box and two lines for padding. */ slots = wlines - 4; if( slots < 0 ) { slots = 0; } /* The code here adjusts the offset value, required when the terminal is resized vertically */ if( slots > count ) { offset = 0; } else { if( focus >= count ) { /* The focus is already at the last element. */ focus = count - 1; } if( focus < 0 ) { /* The focus is already at the last element. */ focus = 0; } } if( count >= slots && slots > 0 ) { offset = focus + 1 - slots; if( offset < 0 ) { offset = 0; } } /* Clear the main window, necessary when switching selections such as method etc */ werase( main_window ); /* Refresh main window */ wnoutrefresh( main_window ); /* Set footer help text */ /* Update the footer window. */ werase( footer_window ); nwipe_gui_title( footer_window, selection_footer ); wrefresh( footer_window ); /* Refresh the stats window */ wnoutrefresh( stats_window ); /* Refresh the options window */ wnoutrefresh( options_window ); /* Update the options window. */ nwipe_gui_options(); /* Initialize the line offset. */ yy = 2; for( i = 0; i < slots && i < count; i++ ) { /* Move to the next line. */ mvwprintw( main_window, yy++, 1, " " ); if( i + offset == focus ) { /* Print the 'enabled' cursor. */ waddch( main_window, ACS_RARROW ); } else { /* Print whitespace. */ waddch( main_window, ' ' ); } /* In the event for the offset value somehow becoming invalid, this if statement will prevent a segfault * and the else part will log the out of bounds values for debugging */ if( i + offset >= 0 && i + offset < count ) { /* print a entry from the list, we need to process the string before display, * removing the double quotes that are used in csv for identifying the start & end of a field. */ if( ( display_line = calloc( sizeof( char ), strlen( list[i + offset] ) ) ) ) { idx = 0; idx2 = 0; while( list[i + offset][idx] != 0 ) { if( list[i + offset][idx] == '"' ) { idx++; } else { display_line[idx2++] = list[i + offset][idx++]; } } display_line[idx2] = 0; wprintw( main_window, "%s ", display_line ); free( display_line ); } } else { nwipe_log( NWIPE_LOG_DEBUG, "GUI.c,nwipe_gui_select(), scroll, array index out of bounds, i=%u, count=%u, slots=%u, " "focus=%u, offset=%u", i, count, slots, focus, offset ); } } /* for */ if( offset > 0 ) { mvwprintw( main_window, 1, wcols - 8, " More " ); waddch( main_window, ACS_UARROW ); } if( count - offset > slots ) { mvwprintw( main_window, wlines - 2, wcols - 8, " More " ); waddch( main_window, ACS_DARROW ); } /* Draw a border around the menu window. */ box( main_window, 0, 0 ); /* Print a title. */ nwipe_gui_title( main_window, window_title ); /* Refresh the window. */ wnoutrefresh( main_window ); /* Output to physical screen */ doupdate(); /* Initialise the iteration counter */ iteration_counter = 0; previous_iteration_timestamp = time( NULL ); /* Calculate Maximum allowed iterations per second */ expected_iterations = ( 1000 / GETCH_BLOCK_MS ) * 8; do { /* Wait 250ms for input from getch, if nothing getch will then continue, * This is necessary so that the while loop can be exited by the * terminate_signal e.g.. the user pressing control-c to exit. * Do not change this value, a higher value means the keys become * sluggish, any slower and more time is spent unnecessarily looping * which wastes CPU cycles. */ validkeyhit = 0; timeout( GETCH_BLOCK_MS ); // block getch() for ideally about 250ms. keystroke = getch(); // Get user input. timeout( -1 ); // Switch back to blocking mode. /* To avoid 100% CPU usage, check for a runaway condition caused by the "keystroke = getch(); (above), from * immediately returning an error condition. We check for an error condition because getch() returns a ERR * value when the timeout value "timeout( 250 );" expires as well as when a real error occurs. We can't * differentiate from normal operation and a failure of the getch function to block for the specified period * of timeout. So here we check the while loop hasn't exceeded the number of expected iterations per second * ie. a timeout(250) block value of 250ms means we should not see any more than (1000/250) = 4 iterations. * We increase this to 32 iterations to allow a little tolerance. Why is this necessary? It's been found * that in KDE konsole and other terminals based on the QT terminal engine exiting the terminal without * first exiting nwipe results in nwipe remaining running but detached from any interface which causes * getch to fail and its associated timeout. So the CPU or CPU core rises to 100%. Here we detect that * failure and exit nwipe gracefully with the appropriate error. This does not affect use of tmux for * attaching or detaching from a running nwipe session when sitting at the selection screen. All other * terminals correctly terminate nwipe when the terminal itself is exited. */ iteration_counter++; if( previous_iteration_timestamp == time( NULL ) ) { if( iteration_counter > expected_iterations ) { nwipe_log( NWIPE_LOG_ERROR, "GUI.c,nwipe_gui_select(), loop runaway, did you close the terminal without exiting " "nwipe? Exiting nwipe now." ); /* Issue signal to nwipe to exit immediately but gracefully */ terminate_signal = 1; } } else { /* new second, so reset counter */ iteration_counter = 0; previous_iteration_timestamp = time( NULL ); } /* We don't necessarily use all of these. For future reference these are some CTRL+key values * ^A - 1, ^B - 2, ^D - 4, ^E - 5, ^F - 6, ^G - 7, ^H - 8, ^I - 9, ^K - 11, ^L - 12, ^N - 14, * ^O - 15, ^P - 16, ^R - 18, ^T - 20, ^U - 21, ^V - 22, ^W - 23, ^X - 24, ^Y - 25 * Use nwipe_log( NWIPE_LOG_DEBUG, "Key Name: %s - %u", keyname(keystroke),keystroke) to * figure out what code is returned by what ever key combination */ switch( keystroke ) { case KEY_DOWN: case 'j': case 'J': validkeyhit = 1; /* Increment the focus. */ focus += 1; if( focus >= count ) { /* The focus is already at the last element. */ focus = count - 1; break; } if( focus - offset >= slots ) { /* The next element is offscreen. Scroll down. */ offset += 1; break; } break; case KEY_UP: case 'k': case 'K': validkeyhit = 1; /* Decrement the focus. */ focus -= 1; if( focus < 0 ) { /* The focus is already at the last element. */ focus = 0; break; } if( focus < offset ) { /* The next element is offscreen. Scroll up. */ offset -= 1; break; } break; case KEY_BACKSPACE: case KEY_LEFT: case 127: *selected_entry = 0; return; break; case KEY_ENTER: case 10: case ' ': validkeyhit = 1; /* Return the index of the selected item in the list. Values start at 1 not zero */ *selected_entry = focus + 1; return; break; } /* keystroke switch */ /* Check the terminal size, if the user has changed it the while loop checks for * this change and exits the valid key hit loop so the windows can be updated */ getmaxyx( stdscr, stdscr_lines, stdscr_cols ); /* Update the selection window every 1 second specifically * so that the drive temperatures are updated and also the line toggle that * occurs with the HPA status and the drive size & temperature. */ if( time( NULL ) > ( check_time + 1 ) ) { check_time = time( NULL ); validkeyhit = 1; } } /* key hit loop */ while( validkeyhit == 0 && terminate_signal != 1 && stdscr_cols_previous == stdscr_cols && stdscr_lines_previous == stdscr_lines ); } while( terminate_signal != 1 ); } /* nwipe_gui_list */ void nwipe_gui_add_customer( void ) { /** * Add new customer top level menu * */ extern int terminate_signal; /* Number of entries in the configuration menu. */ const int count = 4; /* The first tabstop. */ const int tab1 = 2; /* The second tabstop. */ const int tab2 = 27; /* The currently selected method. */ int focus = 0; /* The current working row. */ int yy; /* Input buffer. */ int keystroke; char customer_name[FIELD_LENGTH] = ""; char customer_address[FIELD_LENGTH] = ""; char customer_contact_name[FIELD_LENGTH] = ""; char customer_contact_phone[FIELD_LENGTH] = ""; /* 0 = NO = don't save, 1 = YES = save customer */ int save = NO; /* 0 = Display standard dialog footer, 1 = YES = display "Save Y/N" footer */ int yes_no = NO; /* variables used by libconfig for extracting data from nwipe.conf */ config_setting_t* setting; // const char *business_name, *business_address, *contact_name, *contact_phone, *op_tech_name; extern config_t nwipe_cfg; /* Update the footer window. */ werase( footer_window ); nwipe_gui_title( footer_window, selection_footer_config ); wrefresh( footer_window ); do { do { /* Clear the main window. */ werase( main_window ); /* Change footer based on whether we are waiting for a Y/N response */ if( yes_no == YES ) { /* Update the footer window. */ werase( footer_window ); nwipe_gui_title( footer_window, selection_footer_add_customer_yes_no ); wrefresh( footer_window ); nwipe_gui_create_all_windows_on_terminal_resize( 0, selection_footer_add_customer_yes_no ); } else { /* Update the footer window. */ werase( footer_window ); nwipe_gui_title( footer_window, selection_footer_config ); wrefresh( footer_window ); nwipe_gui_create_all_windows_on_terminal_resize( 0, selection_footer_config ); } /* Initialize the working row. */ yy = 2; /* Print the options. */ mvwprintw( main_window, yy++, tab1, " %s : %s", "Add Customer Name ", customer_name ); mvwprintw( main_window, yy++, tab1, " %s : %s", "Add Customer Address ", customer_address ); mvwprintw( main_window, yy++, tab1, " %s : %s", "Add Customer Contact Name ", customer_contact_name ); mvwprintw( main_window, yy++, tab1, " %s : %s", "Add Customer Contact Phone", customer_contact_phone ); mvwprintw( main_window, yy++, tab1, " " ); /* Print the cursor. */ mvwaddch( main_window, 2 + focus, tab1, ACS_RARROW ); /* Add a border. */ box( main_window, 0, 0 ); /* Add a title. */ nwipe_gui_title( main_window, " PDF Report - Add New Customer " ); /* Refresh the window. */ wrefresh( main_window ); /* Wait 250ms for input from getch, if nothing getch will then continue, * This is necessary so that the while loop can be exited by the * terminate_signal e.g.. the user pressing control-c to exit. * Do not change this value, a higher value means the keys become * sluggish, any slower and more time is spent unnecessarily looping * which wastes CPU cycles. */ timeout( 250 ); /* block getch() for 250ms */ keystroke = getch(); /* Get a keystroke. */ timeout( -1 ); /* Switch back to blocking mode */ if( yes_no == NO ) { switch( keystroke ) { // Save customer case 's': case 'S': break; case KEY_DOWN: case 'j': case 'J': if( focus < count - 1 ) { focus += 1; } break; case KEY_UP: case 'k': case 'K': if( focus > 0 ) { focus -= 1; } break; case KEY_BACKSPACE: case KEY_BREAK: case 27: /* ESC */ /* If the user has entered any text then ask if the customer entries should be saved */ if( customer_name[0] != 0 || customer_address[0] != 0 || customer_contact_name[0] != 0 || customer_contact_phone[0] != 0 ) { /* Set the footer yes/no flag */ yes_no = YES; } else { return; } break; } /* switch */ } else { /* Waiting for a Y/N response */ switch( keystroke ) { case 'y': case 'Y': save = 1; break; case 'n': case 'N': return; break; } } } while( save != YES && keystroke != 's' && keystroke != KEY_ENTER && keystroke != 10 && terminate_signal != 1 ); if( keystroke == KEY_ENTER || keystroke == 10 ) { switch( focus ) { case 0: nwipe_gui_add_customer_name( customer_name ); keystroke = 0; break; case 1: nwipe_gui_add_customer_address( customer_address ); keystroke = 0; break; case 2: nwipe_gui_add_customer_contact_name( customer_contact_name ); keystroke = 0; break; case 3: nwipe_gui_add_customer_contact_phone( customer_contact_phone ); keystroke = 0; break; } } } while( save != YES && keystroke != 's' && keystroke != KEY_ENTER && keystroke != ' ' && keystroke != 10 && terminate_signal != 1 ); /* If save set, or user pressed s or S then save the customer details */ if( keystroke == 's' || keystroke == 'S' || save == 1 ) { write_customer_csv_entry( customer_name, customer_address, customer_contact_name, customer_contact_phone ); } } /* end of nwipe_gui_add_customer( void ) */ void nwipe_gui_add_customer_name( char* customer_name ) { /** * Allows the user to change the customer's contact name as displayed on the PDF report. * * @modifies customer's contact name * @modifies main_window * */ /* The first tabstop. */ const int tab1 = 2; /* The current working row. */ int yy; /* Input buffer. */ int keystroke; /* buffer index */ int idx = 0; extern int terminate_signal; // const char* contact_name; extern config_t nwipe_cfg; extern char nwipe_config_file[]; /* Update the footer window. */ werase( footer_window ); nwipe_gui_title( footer_window, selection_footer_text_entry ); wrefresh( footer_window ); /* Set the buffer index to point to the end of the string, i.e the NULL */ idx = strlen( customer_name ); do { /* Erase the main window. */ werase( main_window ); nwipe_gui_create_all_windows_on_terminal_resize( 0, selection_footer_text_entry ); /* Add a border. */ box( main_window, 0, 0 ); /* Add a title. */ nwipe_gui_title( main_window, " Add New Customer Name " ); /* Initialize the working row. */ yy = 4; mvwprintw( main_window, yy++, tab1, "Enter the customer's name (business or personal name)" ); /* Print this line last so that the cursor is in the right place. */ mvwprintw( main_window, 2, tab1, ">%s", customer_name ); /* Reveal the cursor. */ curs_set( 1 ); /* Refresh the window. */ wrefresh( main_window ); /* Wait 250ms for input from getch, if nothing getch will then continue, * This is necessary so that the while loop can be exited by the * terminate_signal e.g.. the user pressing control-c to exit. * Do not change this value, a higher value means the keys become * sluggish, any slower and more time is spent unnecessarily looping * which wastes CPU cycles. */ timeout( 250 ); // block getch() for 250ms. keystroke = getch(); // Get a keystroke. timeout( -1 ); // Switch back to blocking mode. switch( keystroke ) { /* Escape key. */ case 27: return; case KEY_BACKSPACE: case KEY_LEFT: case 127: if( idx > 0 ) { customer_name[--idx] = 0; } break; } /* switch keystroke */ if( ( keystroke >= ' ' && keystroke <= '~' ) && keystroke != '\"' && idx < FIELD_LENGTH ) { customer_name[idx++] = keystroke; customer_name[idx] = 0; mvwprintw( main_window, 2, tab1, ">%s", customer_name ); } /* Hide the cursor. */ curs_set( 0 ); } while( keystroke != 10 && terminate_signal != 1 ); } /* End of nwipe_gui_add_customer_name() */ void nwipe_gui_add_customer_address( char* customer_address ) { /** * Allows the user to change the customer's address as displayed on the PDF report. * * @modifies customer's address * @modifies main_window * */ /* The first tabstop. */ const int tab1 = 2; /* The current working row. */ int yy; /* Input buffer. */ int keystroke; /* buffer index */ int idx = 0; extern int terminate_signal; // const char* contact_name; extern config_t nwipe_cfg; extern char nwipe_config_file[]; /* Update the footer window. */ werase( footer_window ); nwipe_gui_title( footer_window, selection_footer_text_entry ); wrefresh( footer_window ); /* Set the buffer index to point to the end of the string, i.e the NULL */ idx = strlen( customer_address ); do { /* Erase the main window. */ werase( main_window ); nwipe_gui_create_all_windows_on_terminal_resize( 0, selection_footer_text_entry ); /* Add a border. */ box( main_window, 0, 0 ); /* Add a title. */ nwipe_gui_title( main_window, " Add New Customer Address " ); /* Initialize the working row. */ yy = 4; mvwprintw( main_window, yy++, tab1, "Enter the customer's address" ); /* Print this line last so that the cursor is in the right place. */ mvwprintw( main_window, 2, tab1, ">%s", customer_address ); /* Reveal the cursor. */ curs_set( 1 ); /* Refresh the window. */ wrefresh( main_window ); /* Wait 250ms for input from getch, if nothing getch will then continue, * This is necessary so that the while loop can be exited by the * terminate_signal e.g.. the user pressing control-c to exit. * Do not change this value, a higher value means the keys become * sluggish, any slower and more time is spent unnecessarily looping * which wastes CPU cycles. */ timeout( 250 ); // block getch() for 250ms. keystroke = getch(); // Get a keystroke. timeout( -1 ); // Switch back to blocking mode. switch( keystroke ) { /* Escape key. */ case 27: return; case KEY_BACKSPACE: case KEY_LEFT: case 127: if( idx > 0 ) { customer_address[--idx] = 0; } break; } /* switch keystroke */ if( ( keystroke >= ' ' && keystroke <= '~' ) && keystroke != '\"' && idx < FIELD_LENGTH ) { customer_address[idx++] = keystroke; customer_address[idx] = 0; mvwprintw( main_window, 2, tab1, ">%s", customer_address ); } /* Hide the cursor. */ curs_set( 0 ); } while( keystroke != 10 && terminate_signal != 1 ); } /* End of nwipe_gui_add_customer_address() */ void nwipe_gui_add_customer_contact_name( char* customer_contact_name ) { /** * Allows the user to change the customer contact name as displayed on the PDF report. * * @modifies customer's contact name * @modifies main_window * */ /* The first tabstop. */ const int tab1 = 2; /* The current working row. */ int yy; /* Input buffer. */ int keystroke; /* buffer index */ int idx = 0; extern int terminate_signal; // const char* contact_name; extern config_t nwipe_cfg; extern char nwipe_config_file[]; /* Update the footer window. */ werase( footer_window ); nwipe_gui_title( footer_window, selection_footer_text_entry ); wrefresh( footer_window ); /* Set the buffer index to point to the end of the string, i.e the NULL */ idx = strlen( customer_contact_name ); do { /* Erase the main window. */ werase( main_window ); nwipe_gui_create_all_windows_on_terminal_resize( 0, selection_footer_text_entry ); /* Add a border. */ box( main_window, 0, 0 ); /* Add a title. */ nwipe_gui_title( main_window, " Add New Customer Contact Name " ); /* Initialize the working row. */ yy = 4; mvwprintw( main_window, yy++, tab1, "Enter the customer's contact name" ); /* Print this line last so that the cursor is in the right place. */ mvwprintw( main_window, 2, tab1, ">%s", customer_contact_name ); /* Reveal the cursor. */ curs_set( 1 ); /* Refresh the window. */ wrefresh( main_window ); /* Wait 250ms for input from getch, if nothing getch will then continue, * This is necessary so that the while loop can be exited by the * terminate_signal e.g.. the user pressing control-c to exit. * Do not change this value, a higher value means the keys become * sluggish, any slower and more time is spent unnecessarily looping * which wastes CPU cycles. */ timeout( 250 ); // block getch() for 250ms. keystroke = getch(); // Get a keystroke. timeout( -1 ); // Switch back to blocking mode. switch( keystroke ) { /* Escape key. */ case 27: return; case KEY_BACKSPACE: case KEY_LEFT: case 127: if( idx > 0 ) { customer_contact_name[--idx] = 0; } break; } /* switch keystroke */ if( ( keystroke >= ' ' && keystroke <= '~' ) && keystroke != '\"' && idx < FIELD_LENGTH ) { customer_contact_name[idx++] = keystroke; customer_contact_name[idx] = 0; mvwprintw( main_window, 2, tab1, ">%s", customer_contact_name ); } /* Hide the cursor. */ curs_set( 0 ); } while( keystroke != 10 && terminate_signal != 1 ); } /* End of nwipe_gui_add_customer_contact_name() */ void nwipe_gui_add_customer_contact_phone( char* customer_contact_phone ) { /** * Allows the user to change the customer contact phone as displayed on the PDF report. * * @modifies customer's contact phone * @modifies main_window * */ /* The first tabstop. */ const int tab1 = 2; /* The current working row. */ int yy; /* Input buffer. */ int keystroke; /* buffer index */ int idx = 0; extern int terminate_signal; // const char* contact_name; extern config_t nwipe_cfg; extern char nwipe_config_file[]; /* Update the footer window. */ werase( footer_window ); nwipe_gui_title( footer_window, selection_footer_text_entry ); wrefresh( footer_window ); /* Set the buffer index to point to the end of the string, i.e the NULL */ idx = strlen( customer_contact_phone ); do { /* Erase the main window. */ werase( main_window ); nwipe_gui_create_all_windows_on_terminal_resize( 0, selection_footer_text_entry ); /* Add a border. */ box( main_window, 0, 0 ); /* Add a title. */ nwipe_gui_title( main_window, " Add New Customer Contact Phone " ); /* Initialize the working row. */ yy = 4; mvwprintw( main_window, yy++, tab1, "Enter the customer's contact phone" ); /* Print this line last so that the cursor is in the right place. */ mvwprintw( main_window, 2, tab1, ">%s", customer_contact_phone ); /* Reveal the cursor. */ curs_set( 1 ); /* Refresh the window. */ wrefresh( main_window ); /* Wait 250ms for input from getch, if nothing getch will then continue, * This is necessary so that the while loop can be exited by the * terminate_signal e.g.. the user pressing control-c to exit. * Do not change this value, a higher value means the keys become * sluggish, any slower and more time is spent unnecessarily looping * which wastes CPU cycles. */ timeout( 250 ); // block getch() for 250ms. keystroke = getch(); // Get a keystroke. timeout( -1 ); // Switch back to blocking mode. switch( keystroke ) { /* Escape key. */ case 27: return; case KEY_BACKSPACE: case KEY_LEFT: case 127: if( idx > 0 ) { customer_contact_phone[--idx] = 0; } break; } /* switch keystroke */ if( ( keystroke >= ' ' && keystroke <= '~' ) && keystroke != '\"' && idx < FIELD_LENGTH ) { customer_contact_phone[idx++] = keystroke; customer_contact_phone[idx] = 0; mvwprintw( main_window, 2, tab1, ">%s", customer_contact_phone ); } /* Hide the cursor. */ curs_set( 0 ); } while( keystroke != 10 && terminate_signal != 1 ); } /* End of nwipe_gui_add_customer_contact_phone() */ void nwipe_gui_preview_org_customer( int mode ) { /** * Display the organisation and customers details and the current system date and time * */ extern int terminate_signal; /* Number of entries in the configuration menu. */ const int count = 12; /* The first tabstop. */ const int tab1 = 2; /* The second tabstop. */ const int tab2 = 27; /* The currently selected method. */ int focus = 0; /* The current working row. */ int yy; /* Input buffer. */ int keystroke; time_t t; char output_str[FIELD_LENGTH]; /* Window dimensions */ int wlines; int wcols; /* variables used by libconfig for extracting data from nwipe.conf */ config_setting_t* setting; const char *business_name, *business_address, *contact_name, *contact_phone, *op_tech_name; const char *customer_name, *customer_address, *customer_contact_name, *customer_contact_phone; extern config_t nwipe_cfg; do { do { /* Clear the main window. */ werase( main_window ); /* Update the footer window. */ werase( footer_window ); if( mode == SHOWING_IN_CONFIG_MENUS ) { nwipe_gui_title( footer_window, selection_footer ); nwipe_gui_create_all_windows_on_terminal_resize( 0, selection_footer ); } else { nwipe_gui_create_all_windows_on_terminal_resize( 0, selection_footer_preview_prior_to_drive_selection ); nwipe_gui_title( footer_window, selection_footer_preview_prior_to_drive_selection ); } wrefresh( footer_window ); /* Determine size of window */ getmaxyx( main_window, wlines, wcols ); /* Initialize the working row. */ yy = 2; /* Print the options. */ mvwprintw( main_window, yy++, tab1, " %s", "Business Name" ); mvwprintw( main_window, yy++, tab1, " %s", "Business Address" ); mvwprintw( main_window, yy++, tab1, " %s", "Contact Name" ); mvwprintw( main_window, yy++, tab1, " %s", "Contact Phone" ); mvwprintw( main_window, yy++, tab1, " %s", "Tech/Operator" ); yy++; mvwprintw( main_window, yy++, tab1, " %s", "Customer Name" ); mvwprintw( main_window, yy++, tab1, " %s", "Customer Address" ); mvwprintw( main_window, yy++, tab1, " %s", "Customer Contact Name" ); mvwprintw( main_window, yy++, tab1, " %s", "Customer Contact Phone" ); yy++; mvwprintw( main_window, yy++, tab1, " %s", "System Date/Time" ); /* Print the cursor. */ mvwaddch( main_window, 2 + focus, tab1, ACS_RARROW ); /****************************************************************** * libconfig: Locate the Organisation Details section in nwipe.conf */ setting = config_lookup( &nwipe_cfg, "Organisation_Details" ); /* Retrieve data from nwipe.conf */ if( config_setting_lookup_string( setting, "Business_Name", &business_name ) ) { str_truncate( wcols, tab2, business_name, output_str, FIELD_LENGTH ); mvwprintw( main_window, 2, tab2, ": %s", output_str ); } else { str_truncate( wcols, tab2, "Cannot retrieve business_name, nwipe.conf", output_str, FIELD_LENGTH ); mvwprintw( main_window, 2, tab2, ": %s", output_str ); } /* Retrieve data from nwipe.conf */ if( config_setting_lookup_string( setting, "Business_Address", &business_address ) ) { str_truncate( wcols, tab2, business_address, output_str, FIELD_LENGTH ); mvwprintw( main_window, 3, tab2, ": %s", output_str ); } else { str_truncate( wcols, tab2, "Cannot retrieve business address, nwipe.conf", output_str, FIELD_LENGTH ); mvwprintw( main_window, 3, tab2, ": %s", output_str ); } /* Retrieve data from nwipe.conf */ if( config_setting_lookup_string( setting, "Contact_Name", &contact_name ) ) { str_truncate( wcols, tab2, contact_name, output_str, FIELD_LENGTH ); mvwprintw( main_window, 4, tab2, ": %s", output_str ); } else { str_truncate( wcols, tab2, "Cannot retrieve contact name, nwipe.conf", output_str, FIELD_LENGTH ); mvwprintw( main_window, 4, tab2, ": %s", output_str ); } /* Retrieve data from nwipe.conf */ if( config_setting_lookup_string( setting, "Contact_Phone", &contact_phone ) ) { str_truncate( wcols, tab2, contact_phone, output_str, FIELD_LENGTH ); mvwprintw( main_window, 5, tab2, ": %s", output_str ); } else { str_truncate( wcols, tab2, "Cannot retrieve customer contact phone, nwipe.conf", output_str, FIELD_LENGTH ); mvwprintw( main_window, 5, tab2, ": %s", output_str ); } /* Retrieve data from nwipe.conf */ if( config_setting_lookup_string( setting, "Op_Tech_Name", &op_tech_name ) ) { str_truncate( wcols, tab2, op_tech_name, output_str, FIELD_LENGTH ); mvwprintw( main_window, 6, tab2, ": %s", output_str ); } else { str_truncate( wcols, tab2, "Cannot retrieve op_tech_name, nwipe.conf", output_str, FIELD_LENGTH ); mvwprintw( main_window, 6, tab2, ": %s", output_str ); } /********************************************************************** * libconfig: Locate the current customer details section in nwipe.conf */ setting = config_lookup( &nwipe_cfg, "Selected_Customer" ); /* Retrieve data from nwipe.conf */ if( config_setting_lookup_string( setting, "Customer_Name", &customer_name ) ) { str_truncate( wcols, tab2, customer_name, output_str, FIELD_LENGTH ); mvwprintw( main_window, 8, tab2, ": %s", output_str ); } else { str_truncate( wcols, tab2, "Cannot retrieve Customer_Name, nwipe.conf", output_str, FIELD_LENGTH ); mvwprintw( main_window, 8, tab2, ": %s", output_str ); } /* Retrieve data from nwipe.conf */ if( config_setting_lookup_string( setting, "Customer_Address", &customer_address ) ) { str_truncate( wcols, tab2, customer_address, output_str, FIELD_LENGTH ); mvwprintw( main_window, 9, tab2, ": %s", output_str ); } else { str_truncate( wcols, tab2, "Cannot retrieve customer address, nwipe.conf", output_str, FIELD_LENGTH ); mvwprintw( main_window, 9, tab2, ": %s", output_str ); } /* Retrieve data from nwipe.conf */ if( config_setting_lookup_string( setting, "Contact_Name", &contact_name ) ) { str_truncate( wcols, tab2, contact_name, output_str, FIELD_LENGTH ); mvwprintw( main_window, 10, tab2, ": %s", output_str ); } else { str_truncate( wcols, tab2, "Cannot retrieve contact name, nwipe.conf", output_str, FIELD_LENGTH ); mvwprintw( main_window, 10, tab2, ": %s", output_str ); } /* Retrieve data from nwipe.conf */ if( config_setting_lookup_string( setting, "Contact_Phone", &contact_phone ) ) { str_truncate( wcols, tab2, contact_phone, output_str, FIELD_LENGTH ); mvwprintw( main_window, 11, tab2, ": %s", output_str ); } else { str_truncate( wcols, tab2, "Cannot retrieve contact phone, nwipe.conf", output_str, FIELD_LENGTH ); mvwprintw( main_window, 11, tab2, ": %s", output_str ); } /******************************* * Retrieve system date and time */ time( &t ); mvwprintw( main_window, 13, tab2, ": %s", ctime( &t ) ); /* ************ * Add a border */ box( main_window, 0, 0 ); /************* * Add a title */ nwipe_gui_title( main_window, " PDF Report - Preview Organisation, customer and date/time " ); /******************** * Refresh the window */ wrefresh( main_window ); /* Wait 250ms for input from getch, if nothing getch will then continue, * This is necessary so that the while loop can be exited by the * terminate_signal e.g.. the user pressing control-c to exit. * Do not change this value, a higher value means the keys become * sluggish, any slower and more time is spent unnecessarily looping * which wastes CPU cycles. */ timeout( 250 ); /* block getch() for 250ms */ keystroke = getch(); /* Get a keystroke. */ timeout( -1 ); /* Switch back to blocking mode */ switch( keystroke ) { case KEY_DOWN: case 'j': case 'J': if( focus < count - 1 ) { if( focus == 4 || focus == 9 ) { focus += 2; /* mind the gaps */ } else { focus += 1; } } break; case KEY_UP: case 'k': case 'K': if( focus > 0 ) { if( focus == 6 || focus == 11 ) { focus -= 2; /* mind the gaps */ } else { focus -= 1; } } break; case KEY_BACKSPACE: case KEY_BREAK: case 27: /* ESC */ return; break; case 'A': case 'a': if( mode == SHOWING_PRIOR_TO_DRIVE_SELECTION ) { return; } } /* switch */ } while( keystroke != KEY_ENTER && keystroke != ' ' && keystroke != 10 && terminate_signal != 1 ); if( keystroke == KEY_ENTER || keystroke == 10 || keystroke == ' ' ) { switch( focus ) { case 0: nwipe_gui_organisation_business_name( business_name ); keystroke = 0; break; case 1: nwipe_gui_organisation_business_address( business_address ); keystroke = 0; break; case 2: nwipe_gui_organisation_contact_name( contact_name ); keystroke = 0; break; case 3: nwipe_gui_organisation_contact_phone( contact_phone ); keystroke = 0; break; case 4: nwipe_gui_organisation_op_tech_name( op_tech_name ); keystroke = 0; break; case 6: case 7: case 8: case 9: nwipe_gui_config(); break; case 11: nwipe_gui_set_date_time(); } } } while( keystroke != 'A' && keystroke != 'a' && keystroke != KEY_ENTER && keystroke != ' ' && keystroke != 10 && terminate_signal != 1 ); } /* end of nwipe_gui_preview_org_customer( void ) */ void nwipe_gui_set_date_time( void ) { /** * Set system date and time * */ extern int terminate_signal; /* Number of entries in the configuration menu. */ const int count = 6; /* The first tabstop. */ const int tab1 = 2; /* The second tabstop. */ const int tab2 = 27; /* The currently selected method. */ int focus = 0; /* The current working row. */ int yy; /* Input buffer. */ int keystroke; time_t t; /* Window dimensions */ int wlines; int wcols; extern config_t nwipe_cfg; /* Update the footer window. */ werase( footer_window ); nwipe_gui_title( footer_window, selection_footer_config ); wrefresh( footer_window ); do { do { /* Clear the main window. */ werase( main_window ); nwipe_gui_create_all_windows_on_terminal_resize( 0, selection_footer_config ); /* Determine size of window */ getmaxyx( main_window, wlines, wcols ); /* Initialize the working row. */ yy = 4; /* Print the options. */ mvwprintw( main_window, yy++, tab1, " %s", "Year" ); mvwprintw( main_window, yy++, tab1, " %s", "Month" ); mvwprintw( main_window, yy++, tab1, " %s", "Day" ); yy++; mvwprintw( main_window, yy++, tab1, " %s", "Hours" ); mvwprintw( main_window, yy++, tab1, " %s", "Minutes" ); yy++; mvwprintw( main_window, yy++, tab1, " %s", "If a Network Time Protocol (NTP) daemon is running date/time may not change" ); mvwprintw( main_window, yy++, tab1, " %s", "or may revert back to NTP provided time. Setting time here is for use when" ); mvwprintw( main_window, yy++, tab1, " %s", "the host system is not running NTP or not connected to the internet." ); /* Print the cursor. */ mvwaddch( main_window, 4 + focus, tab1, ACS_RARROW ); /******************************* * Retrieve system date and time */ time( &t ); mvwprintw( main_window, 2, tab1, "%s", ctime( &t ) ); /* ************ * Add a border */ box( main_window, 0, 0 ); /************* * Add a title */ nwipe_gui_title( main_window, " Set date/time " ); /******************** * Refresh the window */ wrefresh( main_window ); /* Wait 250ms for input from getch, if nothing getch will then continue, * This is necessary so that the while loop can be exited by the * terminate_signal e.g.. the user pressing control-c to exit. * Do not change this value, a higher value means the keys become * sluggish, any slower and more time is spent unnecessarily looping * which wastes CPU cycles. */ timeout( 250 ); /* block getch() for 250ms */ keystroke = getch(); /* Get a keystroke. */ timeout( -1 ); /* Switch back to blocking mode */ switch( keystroke ) { case KEY_DOWN: case 'j': case 'J': if( focus < count - 1 ) { if( focus == 2 ) { focus += 2; /* mind the gaps */ } else { focus += 1; } } break; case KEY_UP: case 'k': case 'K': if( focus > 0 ) { if( focus == 4 ) { focus -= 2; /* mind the gaps */ } else { focus -= 1; } } break; case KEY_BACKSPACE: case KEY_BREAK: case 27: /* ESC */ return; } /* switch */ } while( keystroke != KEY_ENTER && keystroke != ' ' && keystroke != 10 && terminate_signal != 1 ); if( keystroke == KEY_ENTER || keystroke == 10 || keystroke == ' ' ) { switch( focus ) { case 0: /* Set year */ nwipe_gui_set_system_year(); keystroke = 0; break; case 1: /* Set month */ nwipe_gui_set_system_month(); keystroke = 0; break; case 2: /* Set day */ nwipe_gui_set_system_day(); keystroke = 0; break; case 4: /* Set hours */ nwipe_gui_set_system_hour(); keystroke = 0; break; case 5: /* Set minutes */ nwipe_gui_set_system_minute(); keystroke = 0; break; } } } while( keystroke != KEY_ENTER && keystroke != ' ' && keystroke != 10 && terminate_signal != 1 ); } /* end of nwipe_gui_set_date_time( void ) */ void nwipe_gui_set_system_year( void ) { /** * Allows the user to edit the host systems year * * @modifies system year * @modifies main_window * */ /* The first tabstop. */ const int tab1 = 2; /* The current working row. */ int yy = 2; /* Input buffer. */ int keystroke; /* Various output from the date command is processed in this buffer */ char date_buffer[256]; date_buffer[0] = 0; char year[5] = ""; char month[3] = ""; char day[3] = ""; char hours[3] = ""; char minutes[3] = ""; char seconds[3] = ""; /* buffer index */ int idx = 0; int status = 0; FILE* fp; extern int terminate_signal; /* Update the footer window. */ werase( footer_window ); nwipe_gui_title( footer_window, selection_footer_text_entry ); wrefresh( footer_window ); fp = popen( "date +%Y", "r" ); if( fp == NULL ) { nwipe_log( NWIPE_LOG_INFO, "popen:Failed to retrieve date +%Y %s", date_buffer ); mvwprintw( main_window, yy + 4, tab1, "popen:date command failed retrieving year" ); } if( fgets( date_buffer, sizeof( date_buffer ), fp ) == NULL ) { nwipe_log( NWIPE_LOG_INFO, "fgets:failed to retrieve year %s", date_buffer ); mvwprintw( main_window, yy + 5, tab1, "fgets:failed retrieving year" ); } /* terminate string after fourth character removing any lf */ date_buffer[4] = 0; pclose( fp ); /* Set the buffer index to point to the end of the string, i.e the NULL */ idx = strlen( date_buffer ); do { /* Erase the main window. */ werase( main_window ); nwipe_gui_create_all_windows_on_terminal_resize( 0, selection_footer_text_entry ); /* Add a border. */ box( main_window, 0, 0 ); /* Add a title. */ nwipe_gui_title( main_window, " Set System Year " ); /* Initialize the working row. */ yy = 4; mvwprintw( main_window, yy++, tab1, "Enter the current year, four numeric digits, return key to submit" ); /* Print this line last so that the cursor is in the right place. */ mvwprintw( main_window, 2, tab1, ">%s", date_buffer ); /* Reveal the cursor. */ curs_set( 1 ); /* Refresh the window. */ wrefresh( main_window ); /* Wait 250ms for input from getch, if nothing getch will then continue, * This is necessary so that the while loop can be exited by the * terminate_signal e.g.. the user pressing control-c to exit. * Do not change this value, a higher value means the keys become * sluggish, any slower and more time is spent unnecessarily looping * which wastes CPU cycles. */ timeout( 250 ); // block getch() for 250ms. keystroke = getch(); // Get a keystroke. timeout( -1 ); // Switch back to blocking mode. switch( keystroke ) { /* Escape key. */ case 27: return; case KEY_BACKSPACE: case KEY_LEFT: case 127: if( idx > 0 ) { date_buffer[--idx] = 0; } break; } /* switch keystroke */ if( ( keystroke >= ' ' && keystroke <= '~' ) && keystroke != '\"' && idx < FIELD_LENGTH && idx < 4 ) { date_buffer[idx++] = keystroke; date_buffer[idx] = 0; mvwprintw( main_window, 2, tab1, ">%s", date_buffer ); } /* Hide the cursor. */ curs_set( 0 ); } while( keystroke != 10 && terminate_signal != 1 ); /* Write year back to system */ status = read_system_datetime( year, month, day, hours, minutes, seconds ); if( status != 0 ) { nwipe_log( NWIPE_LOG_ERROR, "func:read_system_datetime failed, see previous messages for detail" ); } strncpy( year, date_buffer, 4 ); status = write_system_datetime( year, month, day, hours, minutes, seconds ); if( status != 0 ) { nwipe_log( NWIPE_LOG_ERROR, "func:write_system_datetime failed, see previous messages for detail" ); } } /* End of nwipe_gui_set_system_year() */ void nwipe_gui_set_system_month( void ) { /** * Allows the user to edit the host systems year * * @modifies system month * @modifies main_window * */ /* The first tabstop. */ const int tab1 = 2; /* The current working row. */ int yy = 2; /* Input buffer. */ int keystroke; /* Various output from the date command is processed in this buffer */ char date_buffer[256]; date_buffer[0] = 0; char year[5] = ""; char month[3] = ""; char day[3] = ""; char hours[3] = ""; char minutes[3] = ""; char seconds[3] = ""; /* buffer index */ int idx = 0; int status = 0; FILE* fp; extern int terminate_signal; /* Update the footer window. */ werase( footer_window ); nwipe_gui_title( footer_window, selection_footer_text_entry ); wrefresh( footer_window ); fp = popen( "date +%m", "r" ); if( fp == NULL ) { nwipe_log( NWIPE_LOG_INFO, "popen:Failed to retrieve date +%m %s", date_buffer ); mvwprintw( main_window, yy + 4, tab1, "popen:date command failed retrieving month" ); } if( fgets( date_buffer, sizeof( date_buffer ), fp ) == NULL ) { nwipe_log( NWIPE_LOG_INFO, "fgets:failed to retrieve month %s", date_buffer ); mvwprintw( main_window, yy + 5, tab1, "fgets:failed retrieving month" ); } /* terminate string after fourth character removing any lf */ date_buffer[2] = 0; pclose( fp ); /* Set the buffer index to point to the end of the string, i.e the NULL */ idx = strlen( date_buffer ); do { /* Erase the main window. */ werase( main_window ); nwipe_gui_create_all_windows_on_terminal_resize( 0, selection_footer_text_entry ); /* Add a border. */ box( main_window, 0, 0 ); /* Add a title. */ nwipe_gui_title( main_window, " Set System Month " ); /* Initialize the working row. */ yy = 4; mvwprintw( main_window, yy++, tab1, "Enter the current month, two numeric digits, i.e 01, return key to submit" ); /* Print this line last so that the cursor is in the right place. */ mvwprintw( main_window, 2, tab1, ">%s", date_buffer ); /* Reveal the cursor. */ curs_set( 1 ); /* Refresh the window. */ wrefresh( main_window ); /* Wait 250ms for input from getch, if nothing getch will then continue, * This is necessary so that the while loop can be exited by the * terminate_signal e.g.. the user pressing control-c to exit. * Do not change this value, a higher value means the keys become * sluggish, any slower and more time is spent unnecessarily looping * which wastes CPU cycles. */ timeout( 250 ); // block getch() for 250ms. keystroke = getch(); // Get a keystroke. timeout( -1 ); // Switch back to blocking mode. switch( keystroke ) { /* Escape key. */ case 27: return; case KEY_BACKSPACE: case KEY_LEFT: case 127: if( idx > 0 ) { date_buffer[--idx] = 0; } break; } /* switch keystroke */ if( ( keystroke >= ' ' && keystroke <= '~' ) && keystroke != '\"' && idx < FIELD_LENGTH && idx < 4 ) { date_buffer[idx++] = keystroke; date_buffer[idx] = 0; mvwprintw( main_window, 2, tab1, ">%s", date_buffer ); } /* Hide the cursor. */ curs_set( 0 ); } while( keystroke != 10 && terminate_signal != 1 ); /* Write year back to system */ status = read_system_datetime( year, month, day, hours, minutes, seconds ); if( status != 0 ) { nwipe_log( NWIPE_LOG_ERROR, "func:read_system_datetime failed, see previous messages for detail" ); } strncpy( month, date_buffer, 2 ); status = write_system_datetime( year, month, day, hours, minutes, seconds ); if( status != 0 ) { nwipe_log( NWIPE_LOG_ERROR, "func:write_system_datetime failed, see previous messages for detail" ); } } /* End of nwipe_gui_set_system_month() */ void nwipe_gui_set_system_day( void ) { /** * Allows the user to edit the host systems year * * @modifies system day of the month * @modifies main_window * */ /* The first tabstop. */ const int tab1 = 2; /* The current working row. */ int yy = 2; /* Input buffer. */ int keystroke; /* Various output from the date command is processed in this buffer */ char date_buffer[256]; date_buffer[0] = 0; char year[5] = ""; char month[3] = ""; char day[3] = ""; char hours[3] = ""; char minutes[3] = ""; char seconds[3] = ""; /* buffer index */ int idx = 0; int status = 0; FILE* fp; extern int terminate_signal; /* Update the footer window. */ werase( footer_window ); nwipe_gui_title( footer_window, selection_footer_text_entry ); wrefresh( footer_window ); fp = popen( "date +%d", "r" ); if( fp == NULL ) { nwipe_log( NWIPE_LOG_INFO, "popen:Failed to retrieve date +%d %s", date_buffer ); mvwprintw( main_window, yy + 4, tab1, "popen:date command failed retrieving day of month" ); } if( fgets( date_buffer, sizeof( date_buffer ), fp ) == NULL ) { nwipe_log( NWIPE_LOG_INFO, "fgets:failed to retrieve day of month %s", date_buffer ); mvwprintw( main_window, yy + 5, tab1, "fgets:failed retrieving day of month" ); } /* terminate string after fourth character removing any lf */ date_buffer[2] = 0; pclose( fp ); /* Set the buffer index to point to the end of the string, i.e the NULL */ idx = strlen( date_buffer ); do { /* Erase the main window. */ werase( main_window ); nwipe_gui_create_all_windows_on_terminal_resize( 0, selection_footer_text_entry ); /* Add a border. */ box( main_window, 0, 0 ); /* Add a title. */ nwipe_gui_title( main_window, " Set System Day of Month " ); /* Initialize the working row. */ yy = 4; mvwprintw( main_window, yy++, tab1, "Enter the current day of month, two numeric digits, i.e 01, return key to submit" ); /* Print this line last so that the cursor is in the right place. */ mvwprintw( main_window, 2, tab1, ">%s", date_buffer ); /* Reveal the cursor. */ curs_set( 1 ); /* Refresh the window. */ wrefresh( main_window ); /* Wait 250ms for input from getch, if nothing getch will then continue, * This is necessary so that the while loop can be exited by the * terminate_signal e.g.. the user pressing control-c to exit. * Do not change this value, a higher value means the keys become * sluggish, any slower and more time is spent unnecessarily looping * which wastes CPU cycles. */ timeout( 250 ); // block getch() for 250ms. keystroke = getch(); // Get a keystroke. timeout( -1 ); // Switch back to blocking mode. switch( keystroke ) { /* Escape key. */ case 27: return; case KEY_BACKSPACE: case KEY_LEFT: case 127: if( idx > 0 ) { date_buffer[--idx] = 0; } break; } /* switch keystroke */ if( ( keystroke >= ' ' && keystroke <= '~' ) && keystroke != '\"' && idx < FIELD_LENGTH && idx < 4 ) { date_buffer[idx++] = keystroke; date_buffer[idx] = 0; mvwprintw( main_window, 2, tab1, ">%s", date_buffer ); } /* Hide the cursor. */ curs_set( 0 ); } while( keystroke != 10 && terminate_signal != 1 ); /* Write year back to system */ status = read_system_datetime( year, month, day, hours, minutes, seconds ); if( status != 0 ) { nwipe_log( NWIPE_LOG_ERROR, "func:read_system_datetime failed, see previous messages for detail" ); } strncpy( day, date_buffer, 2 ); status = write_system_datetime( year, month, day, hours, minutes, seconds ); if( status != 0 ) { nwipe_log( NWIPE_LOG_ERROR, "func:write_system_datetime failed, see previous messages for detail" ); } } /* End of nwipe_gui_set_system_day() */ void nwipe_gui_set_system_hour( void ) { /** * Allows the user to edit the host systems year * * @modifies system hour * @modifies main_window * */ /* The first tabstop. */ const int tab1 = 2; /* The current working row. */ int yy = 2; /* Input buffer. */ int keystroke; /* Various output from the date command is processed in this buffer */ char date_buffer[256]; date_buffer[0] = 0; char year[5] = ""; char month[3] = ""; char day[3] = ""; char hours[3] = ""; char minutes[3] = ""; char seconds[3] = ""; /* buffer index */ int idx = 0; int status = 0; FILE* fp; extern int terminate_signal; /* Update the footer window. */ werase( footer_window ); nwipe_gui_title( footer_window, selection_footer_text_entry ); wrefresh( footer_window ); fp = popen( "date +%H", "r" ); if( fp == NULL ) { nwipe_log( NWIPE_LOG_INFO, "popen:Failed to retrieve date +%H %s", date_buffer ); mvwprintw( main_window, yy + 4, tab1, "popen:date command failed retrieving hour" ); } if( fgets( date_buffer, sizeof( date_buffer ), fp ) == NULL ) { nwipe_log( NWIPE_LOG_INFO, "fgets:failed to retrieve the hour %s", date_buffer ); mvwprintw( main_window, yy + 5, tab1, "fgets:failed retrieving the hour" ); } /* terminate string after fourth character removing any lf */ date_buffer[2] = 0; pclose( fp ); /* Set the buffer index to point to the end of the string, i.e the NULL */ idx = strlen( date_buffer ); do { /* Erase the main window. */ werase( main_window ); nwipe_gui_create_all_windows_on_terminal_resize( 0, selection_footer_text_entry ); /* Add a border. */ box( main_window, 0, 0 ); /* Add a title. */ nwipe_gui_title( main_window, " Set System Hour " ); /* Initialize the working row. */ yy = 4; mvwprintw( main_window, yy++, tab1, "Enter the current hour, two numeric digits, i.e 01, return key to submit" ); /* Print this line last so that the cursor is in the right place. */ mvwprintw( main_window, 2, tab1, ">%s", date_buffer ); /* Reveal the cursor. */ curs_set( 1 ); /* Refresh the window. */ wrefresh( main_window ); /* Wait 250ms for input from getch, if nothing getch will then continue, * This is necessary so that the while loop can be exited by the * terminate_signal e.g.. the user pressing control-c to exit. * Do not change this value, a higher value means the keys become * sluggish, any slower and more time is spent unnecessarily looping * which wastes CPU cycles. */ timeout( 250 ); // block getch() for 250ms. keystroke = getch(); // Get a keystroke. timeout( -1 ); // Switch back to blocking mode. switch( keystroke ) { /* Escape key. */ case 27: return; case KEY_BACKSPACE: case KEY_LEFT: case 127: if( idx > 0 ) { date_buffer[--idx] = 0; } break; } /* switch keystroke */ if( ( keystroke >= ' ' && keystroke <= '~' ) && keystroke != '\"' && idx < FIELD_LENGTH && idx < 4 ) { date_buffer[idx++] = keystroke; date_buffer[idx] = 0; mvwprintw( main_window, 2, tab1, ">%s", date_buffer ); } /* Hide the cursor. */ curs_set( 0 ); } while( keystroke != 10 && terminate_signal != 1 ); /* Write year back to system */ status = read_system_datetime( year, month, day, hours, minutes, seconds ); if( status != 0 ) { nwipe_log( NWIPE_LOG_ERROR, "func:read_system_datetime failed, see previous messages for detail" ); } strncpy( hours, date_buffer, 2 ); status = write_system_datetime( year, month, day, hours, minutes, seconds ); if( status != 0 ) { nwipe_log( NWIPE_LOG_ERROR, "func:write_system_datetime failed, see previous messages for detail" ); } } /* End of nwipe_gui_set_system_hour() */ void nwipe_gui_set_system_minute( void ) { /** * Allows the user to edit the host systems year * * @modifies system minute * @modifies main_window * */ /* The first tabstop. */ const int tab1 = 2; /* The current working row. */ int yy = 2; /* Input buffer. */ int keystroke; /* Various output from the date command is processed in this buffer */ char date_buffer[256]; date_buffer[0] = 0; char year[5] = ""; char month[3] = ""; char day[3] = ""; char hours[3] = ""; char minutes[3] = ""; char seconds[3] = ""; /* buffer index */ int idx = 0; int status = 0; FILE* fp; extern int terminate_signal; /* Update the footer window. */ werase( footer_window ); nwipe_gui_title( footer_window, selection_footer_text_entry ); wrefresh( footer_window ); fp = popen( "date +%M", "r" ); if( fp == NULL ) { nwipe_log( NWIPE_LOG_INFO, "popen:Failed to retrieve date +%M %s", date_buffer ); mvwprintw( main_window, yy + 4, tab1, "popen:date command failed retrieving minute" ); } if( fgets( date_buffer, sizeof( date_buffer ), fp ) == NULL ) { nwipe_log( NWIPE_LOG_INFO, "fgets:failed to retrieve the minute %s", date_buffer ); mvwprintw( main_window, yy + 5, tab1, "fgets:failed retrieving the minute" ); } /* terminate string after fourth character removing any lf */ date_buffer[2] = 0; pclose( fp ); /* Set the buffer index to point to the end of the string, i.e the NULL */ idx = strlen( date_buffer ); do { /* Erase the main window. */ werase( main_window ); nwipe_gui_create_all_windows_on_terminal_resize( 0, selection_footer_text_entry ); /* Add a border. */ box( main_window, 0, 0 ); /* Add a title. */ nwipe_gui_title( main_window, " Set System Minute " ); /* Initialize the working row. */ yy = 4; mvwprintw( main_window, yy++, tab1, "Enter the current minute, two numeric digits, i.e 01, return key to submit" ); /* Print this line last so that the cursor is in the right place. */ mvwprintw( main_window, 2, tab1, ">%s", date_buffer ); /* Reveal the cursor. */ curs_set( 1 ); /* Refresh the window. */ wrefresh( main_window ); /* Wait 250ms for input from getch, if nothing getch will then continue, * This is necessary so that the while loop can be exited by the * terminate_signal e.g.. the user pressing control-c to exit. * Do not change this value, a higher value means the keys become * sluggish, any slower and more time is spent unnecessarily looping * which wastes CPU cycles. */ timeout( 250 ); // block getch() for 250ms. keystroke = getch(); // Get a keystroke. timeout( -1 ); // Switch back to blocking mode. switch( keystroke ) { /* Escape key. */ case 27: return; case KEY_BACKSPACE: case KEY_LEFT: case 127: if( idx > 0 ) { date_buffer[--idx] = 0; } break; } /* switch keystroke */ if( ( keystroke >= ' ' && keystroke <= '~' ) && keystroke != '\"' && idx < FIELD_LENGTH && idx < 4 ) { date_buffer[idx++] = keystroke; date_buffer[idx] = 0; mvwprintw( main_window, 2, tab1, ">%s", date_buffer ); } /* Hide the cursor. */ curs_set( 0 ); } while( keystroke != 10 && terminate_signal != 1 ); /* Write year back to system */ status = read_system_datetime( year, month, day, hours, minutes, seconds ); if( status != 0 ) { nwipe_log( NWIPE_LOG_ERROR, "func:read_system_datetime failed, see previous messages for detail" ); } strncpy( minutes, date_buffer, 2 ); status = write_system_datetime( year, month, day, hours, minutes, seconds ); if( status != 0 ) { nwipe_log( NWIPE_LOG_ERROR, "func:write_system_datetime failed, see previous messages for detail" ); } } /* End of nwipe_gui_set_system_minute() */ void nwipe_gui_load( void ) { /** * Prints the system load average to the statistics window. * * @modifies stat_window Prints the system load average to the statistics window. * */ /* A file handle for the stat file. */ FILE* nwipe_fp; /* The one, five, and fifteen minute load averages. */ float load_01; float load_05; float load_15; /* Open the loadavg file. */ nwipe_fp = fopen( NWIPE_KNOB_LOADAVG, "r" ); /* Print the label. */ mvwprintw( stats_window, NWIPE_GUI_STATS_LOAD_Y, NWIPE_GUI_STATS_LOAD_X, "Load Averages:" ); if( nwipe_fp ) { /* The load averages are the first three numbers in the file. */ if( 3 == fscanf( nwipe_fp, "%f %f %f", &load_01, &load_05, &load_15 ) ) { /* Print the load average. */ mvwprintw( stats_window, NWIPE_GUI_STATS_LOAD_Y, NWIPE_GUI_STATS_TAB, "%04.2f %04.2f %04.2f", load_01, load_05, load_15 ); } else { /* Print an error. */ mvwprintw( stats_window, NWIPE_GUI_STATS_LOAD_Y, NWIPE_GUI_STATS_TAB, "(fscanf error %i)", errno ); } /* Close the loadavg file. */ fclose( nwipe_fp ); } else { mvwprintw( stats_window, NWIPE_GUI_STATS_LOAD_Y, NWIPE_GUI_STATS_TAB, "(fopen error %i)", errno ); } } /* nwipe_gui_load */ void* nwipe_gui_status( void* ptr ) { /** * Shows runtime statistics and overall progress. * * @parameter count The number of contexts in the array. * @parameter c An array of device contexts. * * @modifies main_window Prints information into the main window. * @modifies c[].throughput Updates the i/o throughput value. * */ extern int terminate_signal; nwipe_thread_data_ptr_t* nwipe_thread_data_ptr; nwipe_thread_data_ptr = (nwipe_thread_data_ptr_t*) ptr; nwipe_context_t** c; nwipe_misc_thread_data_t* nwipe_misc_thread_data; int count; c = nwipe_thread_data_ptr->c; nwipe_misc_thread_data = nwipe_thread_data_ptr->nwipe_misc_thread_data; count = nwipe_misc_thread_data->nwipe_selected; char nomenclature_result_str[NOMENCLATURE_RESULT_STR_SIZE]; /* temporary usage */ /* Spinner character */ char spinner_string[2]; /* Create the finish message, this changes based on whether PDF creation is enabled * and whether a logfile has been specified */ char finish_message[NWIPE_GUI_FOOTER_W + 132]; if( nwipe_options.logfile[0] == 0 && nwipe_options.PDF_enable != 0 ) { snprintf( finish_message, sizeof( finish_message ), "Wipe finished - press enter to create pdfs & exit. Logged to STDOUT" ); } else { if( nwipe_options.logfile[0] != 0 && nwipe_options.PDF_enable != 0 ) { snprintf( finish_message, sizeof( finish_message ), "Wipe finished - press enter to create pdfs & exit. Logged to %s", nwipe_options.logfile ); } else { if( nwipe_options.logfile[0] != 0 && nwipe_options.PDF_enable == 0 ) { snprintf( finish_message, sizeof( finish_message ), "Wipe finished - press enter to exit (pdfs disabled in config). Logged to %s", nwipe_options.logfile ); } else { if( nwipe_options.logfile[0] == 0 && nwipe_options.PDF_enable == 0 ) { snprintf( finish_message, sizeof( finish_message ), "Wipe finished - press enter to exit (pdfs disabled in config). Logged to STDOUT" ); } else { /* This is a catch all something unexpected happens with the above logic */ snprintf( finish_message, sizeof( finish_message ), "Wipe finished - press enter to exit. Logged to STDOUT" ); } } } } /* We count time from when this function is first called. */ static time_t nwipe_time_start = 0; /* Whether the screen has been blanked by the user. */ static int nwipe_gui_blank = 0; /* The current time. */ time_t nwipe_time_now; /* The time when all wipes ended */ time_t nwipe_time_stopped; /* The index of the element that is visible in the first slot. */ static int offset; /* The number of elements that we can show in the window. */ int slots; /* Window dimensions. */ int wlines; int wcols; /* Generic loop variable. */ int i; /* The current working line in the main window. */ int yy; /* User input buffer. */ int keystroke; /* controls main while loop */ int loop_control; /* The combined througput of all processes. */ nwipe_misc_thread_data->throughput = 0; /* The estimated runtime of the slowest device. */ nwipe_misc_thread_data->maxeta = 0; /* The combined number of errors of all processes. */ nwipe_misc_thread_data->errors = 0; /* Time values. */ int nwipe_hh; int nwipe_mm; int nwipe_ss; struct timespec tim, tim2; tim.tv_sec = 0; tim.tv_nsec = 100000000L; /* sleep for 0.1 seconds */ /* Throughput variables */ u64 nwipe_throughput; /* The number of active wipe processes. */ /* Set to 1 initially to start loop. */ int nwipe_active = 1; /* Used in the gui status loop to trap a failure of the halfdelay(), getch() mechanism to block for the designated * period */ int expected_iterations; /* Used in the selection loop to trap a failure of the timeout(), getch() mechanism to block for the designated * period, initialise the counter */ int iteration_counter = 0; time_t previous_iteration_timestamp = time( NULL ); /* Calculate Maximum allowed iterations per second (typically 20), which is double the expected iterations * (typically 10) */ expected_iterations = ( 1000 / GETCH_GUI_STATS_UPDATE_MS ) * 2; if( nwipe_time_start == 0 ) { /* This is the first time that we have been called. */ nwipe_time_start = time( NULL ) - 1; } nwipe_gui_title( footer_window, end_wipe_footer ); loop_control = 1; while( loop_control ) { /* IMPORTANT ! Halfdelay(1) causes getch() to pause for 0.1 secs. This is important for two reasons. * 1. Pauses the getch for 0.1 secs so that the screen is only updated max 10 times/sec. Without * this delay the loop would run hundreds of times per sec maxing out the core. * 2. By keeping the delay below 0.2 seconds, i.e 0.1, it makes the keypress and resizing * nice and responsive. */ halfdelay( GETCH_GUI_STATS_UPDATE_MS ); // Important, don't change this unless you know what you are doing ! // Related to getch(). keystroke = getch(); // Get user input. iteration_counter++; /* Much like the same check we perform in the nwipe_gui_select() function, here we check that we are not looping * any faster than as defined by the halfdelay() function above, typically this loop runs at 10 times a second. * This check makes sure that if the loop runs faster than double this value i.e 20 times a second then the * program exits. This check is therefore determining whether the getch() function is returning immediately * rather than blocking for the defined period of 100ms. Why is this necessary? Some terminals (konsole & * deriviatives) that are exited while nwipe is still running fail to terminate nwipe this causes the * halfdelay()/getch() functions to immediately fail causing the loop frequency to drastically increase. We * detect that speed increase here and therefore close down nwipe. This doesn't affect the use of the tmux * terminal by which you can detach and reattach to running nwipe processes. tmux still works correctly. */ if( previous_iteration_timestamp == time( NULL ) ) { if( iteration_counter > expected_iterations ) { nwipe_log( NWIPE_LOG_ERROR, "GUI.c,nwipe_gui_status(), loop runaway, did you close the terminal without exiting " "nwipe? Initiating shutdown now." ); /* Issue signal to nwipe to shutdown immediately but gracefully */ terminate_signal = 1; } } else { /* new second, so reset counter */ iteration_counter = 0; previous_iteration_timestamp = time( NULL ); } /* Get the current time. */ if( nwipe_active && terminate_signal != 1 ) { nwipe_time_now = time( NULL ); nwipe_time_stopped = nwipe_time_now; } else { nwipe_time_now = nwipe_time_stopped; } /* Erase the main window. */ werase( main_window ); /* Erase the stats window. */ werase( stats_window ); /* Erase the footer window */ werase( footer_window ); /* Only repaint the windows on terminal resize if the user hasn't blanked the screen */ if( nwipe_gui_blank == 0 ) { if( nwipe_active != 0 ) { /* if resizing the terminal during a wipe a specific footer is required */ nwipe_gui_create_all_windows_on_terminal_resize( 0, end_wipe_footer ); } else { /* and if the wipes have finished a different footer is required */ nwipe_gui_create_all_windows_on_terminal_resize( 0, finish_message ); } } /* Initialize our working offset to the third line. */ yy = 2; /* Get the window dimensions. */ getmaxyx( main_window, wlines, wcols ); /* Less four lines for the box and padding. */ slots = wlines - 4; /* Each element prints three lines. */ slots /= 3; if( nwipe_active == 0 || terminate_signal == 1 ) { nwipe_gui_title( footer_window, finish_message ); // Refresh the footer_window ; wnoutrefresh( footer_window ); } if( terminate_signal == 1 ) { loop_control = 0; } if( keystroke > 0x0a && keystroke < 0x7e && nwipe_gui_blank == 1 ) { tft_saver = 0; nwipe_init_pairs(); nwipe_gui_create_all_windows_on_terminal_resize( 1, end_wipe_footer ); /* Show screen */ nwipe_gui_blank = 0; /* Set background */ wbkgdset( stdscr, COLOR_PAIR( 1 ) ); wclear( stdscr ); /* Unhide panels */ show_panel( header_panel ); show_panel( footer_panel ); show_panel( stats_panel ); show_panel( options_panel ); show_panel( main_panel ); /* Reprint the footer */ nwipe_gui_title( footer_window, end_wipe_footer ); // Refresh the footer_window ; wnoutrefresh( footer_window ); /* Update panels */ update_panels(); doupdate(); } else if( keystroke > 0 ) { switch( keystroke ) { case 'b': case 'B': if( nwipe_gui_blank == 0 && tft_saver != 1 ) { /* grey text on black background */ tft_saver = 1; nwipe_init_pairs(); nwipe_gui_create_all_windows_on_terminal_resize( 1, end_wipe_footer ); } else { if( nwipe_gui_blank == 0 && tft_saver == 1 ) { /* Blank screen. */ tft_saver = 0; nwipe_gui_blank = 1; hide_panel( header_panel ); hide_panel( footer_panel ); hide_panel( stats_panel ); hide_panel( options_panel ); hide_panel( main_panel ); } /* Set the background style. */ wbkgdset( stdscr, COLOR_PAIR( 7 ) ); wclear( stdscr ); } break; case KEY_DOWN: case 'j': case 'J': /* Scroll down. */ offset += 1; if( count < slots ) { offset = 0; } else if( offset + slots > count ) { offset = count - slots; } break; case KEY_UP: case 'k': case 'K': /* Scroll up. */ offset -= 1; if( offset < 0 ) { offset = 0; } break; case ' ': case 0x0a: /* Check whether we have finished all wipes, if yes exit while loop if user pressed spacebar or * return. */ if( !nwipe_active || terminate_signal == 1 ) { loop_control = 0; } break; default: /* Do nothing. */ break; } } /* keystroke */ /* If wipe has completed and user has specified auto poweroff or nowait then we can skip waiting for the user to * press return */ if( !nwipe_active ) { if( nwipe_options.autopoweroff || nwipe_options.nowait ) { loop_control = 0; } } /* Update data in statistics & main windows only if we're in 'gui' mode and only if a wipe has started */ if( global_wipe_status == 1 ) { /* Always run compute_stats() as we need to whether any threads are still active */ if( terminate_signal != 1 ) { nwipe_active = compute_stats( ptr ); // Returns number of active wipe threads } /* Only print the stats if the user hasn't blanked the screen */ if( nwipe_gui_blank == 0 ) { /* Print information for the user. */ for( i = offset; i < offset + slots && i < count; i++ ) { /* Print the device details. */ mvwprintw( main_window, yy++, 2, "%s %s [%s] ", c[i]->device_name, c[i]->device_type_str, c[i]->device_size_text ); wprintw_temperature( c[i] ); wprintw( main_window, " %s/%s", c[i]->device_model, c[i]->device_serial_no ); /* Check whether the child process is still running the wipe. */ if( c[i]->wipe_status == 1 ) { /* Print percentage and pass information. */ mvwprintw( main_window, yy++, 4, "[%5.2f%%, round %i of %i, pass %i of %i] ", c[i]->round_percent, c[i]->round_working, c[i]->round_count, c[i]->pass_working, c[i]->pass_count ); } /* child running */ else { if( c[i]->result == 0 ) { mvwprintw( main_window, yy++, 4, "[%05.2f%% complete, SUCCESS! ", c[i]->round_percent ); } else if( c[i]->signal ) { wattron( main_window, COLOR_PAIR( 9 ) ); mvwprintw( main_window, yy++, 4, "(>>> FAILURE! <<<, signal %i) ", c[i]->signal ); wattroff( main_window, COLOR_PAIR( 9 ) ); } else { wattron( main_window, COLOR_PAIR( 9 ) ); mvwprintw( main_window, yy++, 4, "(>>> IOERROR! <<<, code %i) ", c[i]->result ); wattroff( main_window, COLOR_PAIR( 9 ) ); } } /* child returned */ if( c[i]->verify_errors ) { wprintw( main_window, "[verr:%llu] ", c[i]->verify_errors ); } if( c[i]->pass_errors ) { wprintw( main_window, "[perr:%llu] ", c[i]->pass_errors ); } if( c[i]->wipe_status == 1 ) { switch( c[i]->pass_type ) { /* Each text field in square brackets should be the same number of characters * to retain output in columns */ case NWIPE_PASS_FINAL_BLANK: if( !c[i]->sync_status ) { wprintw( main_window, "[ blanking] " ); } break; case NWIPE_PASS_FINAL_OPS2: if( !c[i]->sync_status ) { wprintw( main_window, "[OPS2final] " ); } break; case NWIPE_PASS_WRITE: if( !c[i]->sync_status ) { wprintw( main_window, "[ writing ] " ); } break; case NWIPE_PASS_VERIFY: if( !c[i]->sync_status ) { wprintw( main_window, "[verifying] " ); } break; case NWIPE_PASS_NONE: break; } if( c[i]->sync_status ) { wprintw( main_window, "[ syncing ] " ); } } /* Determine throughput nomenclature for this drive and output drives throughput to GUI */ Determine_C_B_nomenclature( c[i]->throughput, nomenclature_result_str, NOMENCLATURE_RESULT_STR_SIZE ); wprintw( main_window, "[%s/s] ", nomenclature_result_str ); /* Insert whitespace. */ yy += 1; /* Increment the next spinner character for this context if the thread is active */ if( c[i]->wipe_status == 1 ) { spinner( c, i ); spinner_string[0] = c[i]->spinner_character[0]; } else { /* If the wipe thread is no longer active, replace the spinner with a space */ spinner_string[0] = ' '; } spinner_string[1] = 0; wprintw( main_window, " %s ", spinner_string ); } if( offset > 0 ) { mvwprintw( main_window, 1, wcols - 8, " More " ); waddch( main_window, ACS_UARROW ); } if( count - offset > slots ) { mvwprintw( main_window, wlines - 2, wcols - 8, " More " ); waddch( main_window, ACS_DARROW ); } /* Box the main window. */ box( main_window, 0, 0 ); /* Refresh the main window. */ wnoutrefresh( main_window ); /* Update the load average field, but only if we are still wiping */ if( nwipe_active && terminate_signal != 1 ) { nwipe_gui_load(); } nwipe_throughput = nwipe_misc_thread_data->throughput; /* Determine the nomenclature for the combined throughput */ Determine_C_B_nomenclature( nwipe_throughput, nomenclature_result_str, NOMENCLATURE_RESULT_STR_SIZE ); /* Print the combined throughput. */ mvwprintw( stats_window, NWIPE_GUI_STATS_THROUGHPUT_Y, NWIPE_GUI_STATS_THROUGHPUT_X, "Throughput:" ); mvwprintw( stats_window, NWIPE_GUI_STATS_THROUGHPUT_Y, NWIPE_GUI_STATS_TAB, "%s/s", nomenclature_result_str ); /* Change the current time into a delta. */ nwipe_time_now -= nwipe_time_start; /* Put the delta into HH:mm:ss form. */ nwipe_hh = nwipe_time_now / 3600; nwipe_time_now %= 3600; nwipe_mm = nwipe_time_now / 60; nwipe_time_now %= 60; nwipe_ss = nwipe_time_now; /* Print the runtime. */ mvwprintw( stats_window, NWIPE_GUI_STATS_RUNTIME_Y, 1, "Runtime:" ); mvwprintw( stats_window, NWIPE_GUI_STATS_RUNTIME_Y, NWIPE_GUI_STATS_TAB, "%02i:%02i:%02i", nwipe_hh, nwipe_mm, nwipe_ss ); mvwprintw( stats_window, NWIPE_GUI_STATS_ETA_Y, 1, "Remaining:" ); time_t nwipe_maxeta = nwipe_misc_thread_data->maxeta; if( nwipe_maxeta > 0 ) { /* Do it again for the estimated runtime remaining. */ nwipe_hh = nwipe_maxeta / 3600; nwipe_maxeta %= 3600; nwipe_mm = nwipe_maxeta / 60; nwipe_maxeta %= 60; nwipe_ss = nwipe_maxeta; /* Print the estimated runtime remaining. */ mvwprintw( stats_window, NWIPE_GUI_STATS_ETA_Y, NWIPE_GUI_STATS_TAB, "%02i:%02i:%02i", nwipe_hh, nwipe_mm, nwipe_ss ); } /* Print the error count. */ mvwprintw( stats_window, NWIPE_GUI_STATS_ERRORS_Y, NWIPE_GUI_STATS_ERRORS_X, "Errors:" ); mvwprintw( stats_window, NWIPE_GUI_STATS_ERRORS_Y, NWIPE_GUI_STATS_TAB, " %llu", nwipe_misc_thread_data->errors ); /* Add a border. */ box( stats_window, 0, 0 ); /* Add a title. */ mvwprintw( stats_window, 0, ( NWIPE_GUI_STATS_W - strlen( stats_title ) ) / 2, "%s", stats_title ); /* Refresh internal representation of stats window */ wnoutrefresh( stats_window ); /* Output all windows to screen */ doupdate(); } // end blank screen if } // end wipes have started if } /* End of while loop */ nwipe_gui_title( footer_window, finish_message ); terminate_signal = 1; return NULL; } /* nwipe_gui_status */ int compute_stats( void* ptr ) { nwipe_thread_data_ptr_t* nwipe_thread_data_ptr; nwipe_thread_data_ptr = (nwipe_thread_data_ptr_t*) ptr; nwipe_context_t** c; nwipe_misc_thread_data_t* nwipe_misc_thread_data; c = nwipe_thread_data_ptr->c; nwipe_misc_thread_data = nwipe_thread_data_ptr->nwipe_misc_thread_data; int count = nwipe_misc_thread_data->nwipe_selected; int nwipe_active = 0; int i; time_t nwipe_time_now = time( NULL ); nwipe_misc_thread_data->throughput = 0; nwipe_misc_thread_data->maxeta = 0; nwipe_misc_thread_data->errors = 0; /* Enumerate all contexts to compute statistics. */ for( i = 0; i < count; i++ ) { /* Check whether the child process is still running the wipe. */ if( c[i]->wipe_status == 1 ) { /* Increment the child counter. */ nwipe_active += 1; /* Even if the wipe has finished ALWAYS run the stats one last time so the final SUCCESS percentage value is * correct. Maintain a rolling average of throughput. */ nwipe_update_speedring( &c[i]->speedring, c[i]->round_done, nwipe_time_now ); if( c[i]->speedring.timestotal > 0 && c[i]->wipe_status == 1 ) { /* Update the current average throughput in bytes-per-second. */ c[i]->throughput = c[i]->speedring.bytestotal / c[i]->speedring.timestotal; /* Only update the estimated remaining runtime if the * throughput for a given drive is greater than 100,000 bytes per second * This prevents enormous ETA's being calculated on an unresponsive * drive */ if( c[i]->throughput > 100000 ) { c[i]->eta = ( c[i]->round_size - c[i]->round_done ) / c[i]->throughput; if( c[i]->eta > nwipe_misc_thread_data->maxeta ) { nwipe_misc_thread_data->maxeta = c[i]->eta; } } } /* Calculate the average throughput */ c[i]->throughput = (double) c[i]->round_done / (double) difftime( nwipe_time_now, c[i]->start_time ); } /* Update the percentage value. */ c[i]->round_percent = (double) c[i]->round_done / (double) c[i]->round_size * 100; if( c[i]->wipe_status == 1 ) { /* Accumulate combined throughput. */ nwipe_misc_thread_data->throughput += c[i]->throughput; } /* Accumulate the error count. */ nwipe_misc_thread_data->errors += c[i]->pass_errors; nwipe_misc_thread_data->errors += c[i]->verify_errors; nwipe_misc_thread_data->errors += c[i]->fsyncdata_errors; /* Read the drive temperature values */ // if( nwipe_time_now > ( c[i]->temp1_time + 60 ) ) // { // nwipe_update_temperature( c[i] ); // } } /* for statistics */ return nwipe_active; } void nwipe_update_speedring( nwipe_speedring_t* speedring, u64 speedring_bytes, time_t speedring_now ) { if( speedring->timeslast == 0 ) { /* Ignore the first sample and initialize. */ speedring->timeslast = speedring_now; return; } if( speedring_now - speedring->timeslast < NWIPE_KNOB_SPEEDRING_GRANULARITY ) { /* Avoid jitter caused by frequent updates. */ return; } /* Subtract the oldest speed sample from the accumulator. */ speedring->bytestotal -= speedring->bytes[speedring->position]; speedring->timestotal -= speedring->times[speedring->position]; /* Put the latest bytes-per-second sample into the ring buffer. */ speedring->bytes[speedring->position] = speedring_bytes - speedring->byteslast; speedring->times[speedring->position] = speedring_now - speedring->timeslast; /* Add the newest speed sample to the accumulator. */ speedring->bytestotal += speedring->bytes[speedring->position]; speedring->timestotal += speedring->times[speedring->position]; /* Remember the last sample. */ speedring->byteslast = speedring_bytes; speedring->timeslast = speedring_now; if( ++speedring->position >= NWIPE_KNOB_SPEEDRING_SIZE ) { speedring->position = 0; } } int spinner( nwipe_context_t** ptr, int device_idx ) { nwipe_context_t** c; c = ptr; /* The spinner characters |/-\|/-\ */ char sc[9] = "|/-\\|/-\\/"; /* Check sanity of index */ if( c[device_idx]->spinner_idx < 0 || c[device_idx]->spinner_idx > 7 ) { return 1; } c[device_idx]->spinner_character[0] = sc[c[device_idx]->spinner_idx]; c[device_idx]->spinner_idx++; if( c[device_idx]->spinner_idx > 7 ) { c[device_idx]->spinner_idx = 0; } return 0; } void temp1_flash( nwipe_context_t* c ) { if( c->temp1_flash_rate_counter < c->temp1_flash_rate ) { c->temp1_flash_rate_counter++; } else { c->temp1_flash_rate_counter = 0; if( c->temp1_flash_rate_status == 0 ) { c->temp1_flash_rate_status = 1; } else { c->temp1_flash_rate_status = 0; } } } void wprintw_temperature( nwipe_context_t* c ) { /* See header for description of function */ int temp_highest_limit; int temp_high_limit; int temp_low_limit; int temp_lowest_limit; int local_temp1_input = c->temp1_input; int local_temp1_crit = c->temp1_crit; int local_temp1_max = c->temp1_max; int local_temp1_min = c->temp1_min; int local_temp1_lcrit = c->temp1_lcrit; /* Initialise */ temp_highest_limit = NO_TEMPERATURE_DATA; temp_high_limit = NO_TEMPERATURE_DATA; temp_low_limit = NO_TEMPERATURE_DATA; temp_lowest_limit = NO_TEMPERATURE_DATA; #if 0 /* NOTE TEST Function, TEST Function #if 0 when not testing * Should increment temperature back and forth between +10 to -10 * while changing the color based on the settings such as * c->temp1_crit and others below */ if( c->test_use1 > 12 || c->test_use1 < -12 ) { c->test_use1 = 0; // the value c->test_use2 = 0; // direction 0 = -- or 1 = ++ } if( c->test_use1 >= 10 ) { c->test_use2 = 0; } else { if( c->test_use1 <= -10 ) { c->test_use2 = 1; } } if( c->test_use2 == 0 ) { c->test_use1--; } else { c->test_use1++; } /* Five test cases to test temperature color logic * test only with temperatures in the range -8 to +8 * test with each set of five for expected result if * changes are made. * * Uncomment only one group in turn to be tested. */ local_temp1_input = c->test_use1; // // Expected result - white on blue between +5 & -5, white on red above 5 // white on black below -5 local_temp1_crit = NO_TEMPERATURE_DATA; local_temp1_max = 5; local_temp1_min = -5; local_temp1_lcrit = NO_TEMPERATURE_DATA; // // Expected result - white on blue between +5 & -5, white on red above 5 // white on black below -5 //local_temp1_crit = 5; //local_temp1_max = NO_TEMPERATURE_DATA; //local_temp1_min = NO_TEMPERATURE_DATA; //local_temp1_lcrit = -5; // // Expected result - white on blue 5 to -5, 5-7 red on blue, // 8+ white on red, -5 to-7 black on blue, less than -7 white on black //local_temp1_crit = 8; //local_temp1_max = 5; //local_temp1_min = -5; //local_temp1_lcrit = -8; // // Expected result - white on blue 5 to -5, 5-7 red on blue, // 8+ white on red, -5 to-7 black on blue, less than -7 white on black //local_temp1_crit = 5; //local_temp1_max = 8; //local_temp1_min = -8; //local_temp1_lcrit = -5; // // Expected result - always white text on blue background //local_temp1_crit = NO_TEMPERATURE_DATA; //local_temp1_max = NO_TEMPERATURE_DATA; //local_temp1_min = NO_TEMPERATURE_DATA; //local_temp1_lcrit = NO_TEMPERATURE_DATA; #endif /* Depending upon the drive firmware, the meaning of 'high critical' & 'max' * and 'low critical' & 'low' can be interchanged. First validate for 'no data' * (1000000) and also a 0 in 'high critical' and 'max', then assign the values * to our four variables in the appropriate order. */ /* Validate critical high value & max for 0, if 0 it's invalid, change to 1000000 */ /* Assign temp1_crit & temp1_max to local variables as we are going to alter * them if 0, as they may be updated elsewhere we don't want them changed back half * way through our processing. This is only necessary for the high temperatures and * not the low temperatures as low temperatures may well be 0. */ if( local_temp1_crit == 0 ) { local_temp1_crit = NO_TEMPERATURE_DATA; } if( local_temp1_max == 0 ) { local_temp1_max = NO_TEMPERATURE_DATA; } /* Check which way around they are */ if( local_temp1_crit != NO_TEMPERATURE_DATA && local_temp1_max != NO_TEMPERATURE_DATA ) { if( local_temp1_crit > local_temp1_max ) { temp_highest_limit = local_temp1_crit; temp_high_limit = local_temp1_max; } else { temp_highest_limit = local_temp1_max; temp_high_limit = local_temp1_crit; } } else { /* If only one or the other is present then assign that value to both high critical and max */ if( local_temp1_crit == NO_TEMPERATURE_DATA && local_temp1_max != NO_TEMPERATURE_DATA ) { temp_highest_limit = local_temp1_max; temp_high_limit = local_temp1_max; } else { /* If high critical is present but max is not, assign high critical to both */ if( local_temp1_crit != NO_TEMPERATURE_DATA && local_temp1_max == NO_TEMPERATURE_DATA ) { temp_highest_limit = local_temp1_crit; temp_high_limit = local_temp1_crit; } else { /* neither is present so mark both locals as not present */ temp_highest_limit = NO_TEMPERATURE_DATA; temp_high_limit = NO_TEMPERATURE_DATA; } } } /* Now do the same for the low critical limit and low limit. */ /* Check which way around they are */ if( local_temp1_lcrit != NO_TEMPERATURE_DATA && local_temp1_min != NO_TEMPERATURE_DATA ) { if( local_temp1_lcrit < local_temp1_min ) { temp_lowest_limit = local_temp1_lcrit; temp_low_limit = local_temp1_min; } else { temp_lowest_limit = local_temp1_min; temp_low_limit = local_temp1_lcrit; } } else { /* If only one or the other is present then assign that value to both high critical and max */ if( local_temp1_lcrit == NO_TEMPERATURE_DATA && local_temp1_min != NO_TEMPERATURE_DATA ) { temp_lowest_limit = local_temp1_min; temp_low_limit = local_temp1_min; } else { /* If high critical is present but max is not, assign high critical to both */ if( local_temp1_lcrit != NO_TEMPERATURE_DATA && local_temp1_min == NO_TEMPERATURE_DATA ) { temp_lowest_limit = local_temp1_lcrit; temp_low_limit = local_temp1_lcrit; } else { /* neither is present so mark both locals as not present */ temp_lowest_limit = NO_TEMPERATURE_DATA; temp_low_limit = NO_TEMPERATURE_DATA; } } } /* if drive temperature has exceeded the critical temperature if available */ if( ( local_temp1_input >= temp_highest_limit ) && ( local_temp1_input != NO_TEMPERATURE_DATA ) && ( temp_highest_limit != NO_TEMPERATURE_DATA ) ) { /* white on red */ wattron( main_window, COLOR_PAIR( 6 ) ); wprintw( main_window, "[%dC]", local_temp1_input ); wattroff( main_window, COLOR_PAIR( 6 ) ); } else { /* if drive temperature has exceeded the max temperature if available */ if( ( local_temp1_input >= temp_high_limit ) && ( local_temp1_input <= temp_highest_limit ) && ( local_temp1_input != NO_TEMPERATURE_DATA ) && ( temp_high_limit != NO_TEMPERATURE_DATA ) ) { /* red on blue */ wattron( main_window, COLOR_PAIR( 3 ) ); wprintw( main_window, "[%dC]", local_temp1_input ); wattroff( main_window, COLOR_PAIR( 3 ) ); } else { /* if drive temperature is below the lowest critical temperature and the critical value is present */ if( ( local_temp1_input <= temp_lowest_limit ) && ( temp_lowest_limit != NO_TEMPERATURE_DATA ) && ( local_temp1_input != NO_TEMPERATURE_DATA ) ) { /* white on black */ wattron( main_window, COLOR_PAIR( 14 ) ); wprintw( main_window, "[%dC]", local_temp1_input ); wattroff( main_window, COLOR_PAIR( 14 ) ); } else { /* if drive temperature is below the minimum but above the lowest temperature and the value is present */ if( ( ( local_temp1_input <= temp_low_limit ) && ( local_temp1_input >= temp_lowest_limit ) && ( local_temp1_input != NO_TEMPERATURE_DATA ) && ( temp_low_limit != NO_TEMPERATURE_DATA ) ) ) { /* black on blue */ wattron( main_window, COLOR_PAIR( 11 ) ); wprintw( main_window, "[%dC]", local_temp1_input ); wattroff( main_window, COLOR_PAIR( 11 ) ); } else { if( local_temp1_input != NO_TEMPERATURE_DATA ) { /* Default white on blue */ wprintw( main_window, "[%dC]", local_temp1_input ); } else { /* Default white on blue */ wprintw( main_window, "[--C]" ); } } } } } } char* str_truncate( int wcols, int start_column, const char* input, char* output, int output_length ) { /*** * Truncate a string based on start position and terminal width */ int length, idx = 0; length = wcols - start_column - 1; idx = 0; while( idx < output_length && idx < length ) { output[idx] = input[idx]; idx++; } /* terminate the string */ output[idx] = 0; return output; }