/* * temperature.c: functions that populate the drive temperature variables * in each drives context structure. * * This program is free software; you can redistribute it and/or modify it under * the terms of the GNU General Public License as published by the Free Software * Foundation, version 2. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS * FOR A PARTICULAR PURPOSE. See the GNU General Public License for more * details. * * You should have received a copy of the GNU General Public License along with * this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. */ // #define _LARGEFILE64_SOURCE // #define _FILE_OFFSET_BITS 64 #define _BSD_SOURCE #include #include #include #include #include #include #include #include "nwipe.h" #include "context.h" #include "method.h" #include "device.h" #include "prng.h" #include "options.h" #include "device.h" #include "logging.h" #include "temperature.h" #include "miscellaneous.h" extern int terminate_signal; int nwipe_init_temperature( nwipe_context_t* c ) { /* See header definition for description of function */ DIR* dir; DIR* dir2; const char dirpath[] = "/sys/class/hwmon"; char dirpath_tmp[256]; char dirpath_tmp2[256]; char dirpath_hwmonX[256]; char device[256]; char device_context_name[256]; // const char dirpath[] = "/home/nick/mouse/hwmon1"; struct dirent* dp; struct dirent* dp2; /* Why Initialise with 1000000 (defined as NO_TEMPERATURE_DATA)? * Because the GUI needs to know whether data has been obtained * so it can display appropriate information when a * device is unable to provide temperature data */ c->templ_has_hwmon_data = 0; c->temp1_crit = NO_TEMPERATURE_DATA; c->temp1_highest = NO_TEMPERATURE_DATA; c->temp1_input = NO_TEMPERATURE_DATA; c->temp1_lcrit = NO_TEMPERATURE_DATA; c->temp1_lowest = NO_TEMPERATURE_DATA; c->temp1_max = NO_TEMPERATURE_DATA; c->temp1_min = NO_TEMPERATURE_DATA; c->temp1_monitored_wipe_max = NO_TEMPERATURE_DATA; c->temp1_monitored_wipe_min = NO_TEMPERATURE_DATA; c->temp1_monitored_wipe_avg = NO_TEMPERATURE_DATA; c->temp1_flash_rate = 0; c->temp1_flash_rate_counter = 0; c->temp1_path[0] = 0; c->temp1_time = 0; /* Each hwmonX directory is processed in turn and once a hwmonX directory has been * found that is a block device and the block device name matches the drive * name in the current context then the path to ../hwmonX is constructed and written * to the drive context structure '* c'. This path is used in the nwipe_update_temperature * function to retrieve temperature data and store it in the device context */ if( ( dir = opendir( dirpath ) ) != NULL ) { /* Process each hwmonX sub directory in turn */ while( ( dp = readdir( dir ) ) != NULL ) { /* Does the directory start with 'hwmon' */ if( strstr( dp->d_name, "hwmon" ) != NULL ) { if( nwipe_options.verbose ) { /* print a empty line to separate the different hwmon sensors */ nwipe_log( NWIPE_LOG_DEBUG, "hwmon:" ); } strcpy( dirpath_tmp, dirpath ); strcat( dirpath_tmp, "/" ); strcat( dirpath_tmp, dp->d_name ); strcpy( dirpath_hwmonX, dirpath_tmp ); strcat( dirpath_tmp, "/device/block" ); /* Depending on the class of block device, the device name may * appear in different sub-directories. So we try to open each * directory that are known to contain block devices. These are * /sys/class/hwmon/hwmonX/device/block * /sys/class/hwmon/hwmonX/device/nvme/nvme0 * /sys/class/hwmon/hwmonX/device/ */ if( ( dir2 = opendir( dirpath_tmp ) ) == NULL ) { if( nwipe_options.verbose ) { nwipe_log( NWIPE_LOG_DEBUG, "hwmon: %s doesn't exist, trying next path", dirpath_tmp ); } strcpy( dirpath_tmp2, dirpath_hwmonX ); strcat( dirpath_tmp2, "/device/nvme/nvme0" ); strcpy( dirpath_tmp, dirpath_tmp2 ); if( ( dir2 = opendir( dirpath_tmp ) ) == NULL ) { if( nwipe_options.verbose ) { nwipe_log( NWIPE_LOG_DEBUG, "hwmon: %s doesn't exist, trying next path", dirpath_tmp ); } strcpy( dirpath_tmp2, dirpath_hwmonX ); strcat( dirpath_tmp2, "/device" ); strcpy( dirpath_tmp, dirpath_tmp2 ); if( ( dir2 = opendir( dirpath_tmp ) ) == NULL ) { if( nwipe_options.verbose ) { nwipe_log( NWIPE_LOG_DEBUG, "hwmon: %s doesn't exist, no more paths to try", dirpath_tmp ); } continue; } } } if( dir2 != NULL ) { if( nwipe_options.verbose ) { nwipe_log( NWIPE_LOG_DEBUG, "hwmon: Found %s", dirpath_tmp ); } /* Read the device name */ while( ( dp2 = readdir( dir2 ) ) != NULL ) { if( nwipe_options.verbose ) { nwipe_log( NWIPE_LOG_DEBUG, "hwmon: dirpath_tmp=%s/%s", dirpath_tmp, &dp2->d_name[0] ); } /* Skip the '.' and '..' directories */ if( dp2->d_name[0] == '.' ) { continue; } strcpy( device, dp2->d_name ); /* Create a copy of the device name from the context but strip the path from it, right justify * device name, prefix with spaces so length is 8. */ nwipe_strip_path( device_context_name, c->device_name ); /* Remove leading/training whitespace from a string and left justify result */ trim( device_context_name ); /* Does the hwmon device match the device for this drive context */ if( strcmp( device, device_context_name ) != 0 ) { /* No, so try next hwmon device */ continue; } else { /* Match ! This hwmon device matches this context, so write the hwmonX path to the context */ nwipe_log( NWIPE_LOG_NOTICE, "hwmon: %s has temperature monitoring", device, dirpath_tmp ); if( nwipe_options.verbose ) { nwipe_log( NWIPE_LOG_DEBUG, "hwmon: %s found in %s", device, dirpath_tmp ); } /* Copy the hwmon path to the drive context structure */ strcpy( c->temp1_path, dirpath_hwmonX ); c->templ_has_hwmon_data = 1; } } closedir( dir2 ); } } } closedir( dir ); } /* if no hwmon data available try scsi access (SAS Disks are known to be not working in hwmon */ if( c->templ_has_hwmon_data == 0 && ( c->device_type == NWIPE_DEVICE_SAS || c->device_type == NWIPE_DEVICE_SCSI ) ) { nwipe_log( NWIPE_LOG_NOTICE, "no hwmon data for %s, try to get SCSI data", c->device_name ); if( nwipe_init_scsi_temperature( c ) == 0 ) { c->templ_has_scsitemp_data = 1; nwipe_log( NWIPE_LOG_INFO, "got SCSI temperature data for %s", c->device_name ); } else { c->templ_has_scsitemp_data = 0; nwipe_log( NWIPE_LOG_INFO, "got no SCSI temperature data for %s", c->device_name ); } } return 0; } float timedifference_msec( struct timeval tv_start, struct timeval tv_end ) { /* helper function for time measurement in msec */ return ( tv_end.tv_sec - tv_start.tv_sec ) * 1000.0f + ( tv_end.tv_usec - tv_start.tv_usec ) / 1000.0f; } void* nwipe_update_temperature_thread( void* ptr ) { int i; /* Set up the structs we will use for the data required. */ nwipe_thread_data_ptr_t* nwipe_thread_data_ptr; nwipe_context_t** c; nwipe_misc_thread_data_t* nwipe_misc_thread_data; /* Retrieve from the pointer passed to the function. */ nwipe_thread_data_ptr = (nwipe_thread_data_ptr_t*) ptr; c = nwipe_thread_data_ptr->c; nwipe_misc_thread_data = nwipe_thread_data_ptr->nwipe_misc_thread_data; /* mark start second of update */ time_t nwipe_timemark = time( NULL ); /* update immediately on entry to thread */ for( i = 0; i < nwipe_misc_thread_data->nwipe_enumerated; i++ ) { nwipe_update_temperature( c[i] ); if( terminate_signal == 1 ) { break; } } while( terminate_signal != 1 ) { /* Update all drive/s but never repeat checking the * set of drive/s faster than once every 2 seconds */ if( time( NULL ) > ( nwipe_timemark + 1 ) ) { nwipe_timemark = time( NULL ); for( i = 0; i < nwipe_misc_thread_data->nwipe_enumerated; i++ ) { nwipe_update_temperature( c[i] ); } } else { sleep( 1 ); } } return NULL; } void nwipe_update_temperature( nwipe_context_t* c ) { /* Warning !! This function should only be called by nwipe_update_temperature_thread() * Due to delays of upto 2 seconds with some drives, especially SAS in obtaining * temperatures while wiping, the delays being worse the more drives you are wiping. Updating * temperatures are performed within it's own thread so it doesn't cause momentary freezes * in the GUI interface. * * For the given drive context obtain the path to it's hwmon temperature settings * and read then write the temperature values back to the context. A numeric ascii to integer conversion is * performed. The temperaures should be updated no more frequently than every 60 seconds */ char temperature_label[NUMBER_OF_FILES][20] = { "temp1_crit", "temp1_highest", "temp1_input", "temp1_lcrit", "temp1_lowest", "temp1_max", "temp1_min" }; int* temperature_pcontext[NUMBER_OF_FILES] = { &( c->temp1_crit ), &( c->temp1_highest ), &( c->temp1_input ), &( c->temp1_lcrit ), &( c->temp1_lowest ), &( c->temp1_max ), &( c->temp1_min ) }; char path[256]; char temperature[256]; FILE* fptr; int idx; int result; struct timeval tv_start; struct timeval tv_end; float delta_t; /* avoid being called more often than 1x per 60 seconds */ time_t nwipe_time_now = time( NULL ); if( nwipe_time_now - c->temp1_time < 60 ) { return; } /* measure time it takes to get the temperatures */ gettimeofday( &tv_start, 0 ); /* try to get temperatures from hwmon, standard */ if( c->templ_has_hwmon_data == 1 ) { for( idx = 0; idx < NUMBER_OF_FILES; idx++ ) { /* Construct the full path including filename */ strcpy( path, c->temp1_path ); strcat( path, "/" ); strcat( path, &( temperature_label[idx][0] ) ); /* Open the file */ if( ( fptr = fopen( path, "r" ) ) != NULL ) { /* Acquire data until we reach a newline */ result = fscanf( fptr, "%[^\n]", temperature ); /* Convert numeric ascii to binary integer */ *( temperature_pcontext[idx] ) = atoi( temperature ); /* Divide by 1000 to get degrees celsius */ *( temperature_pcontext[idx] ) = *( temperature_pcontext[idx] ) / 1000; if( nwipe_options.verbose ) { nwipe_log( NWIPE_LOG_NOTICE, "hwmon: %s %dC", path, *( temperature_pcontext[idx] ) ); } fclose( fptr ); } else { if( nwipe_options.verbose ) { nwipe_log( NWIPE_LOG_NOTICE, "hwmon: Unable to open %s", path ); } } } } else { /* alternative method to get temperature from SCSI/SAS disks */ if( c->device_type == NWIPE_DEVICE_SAS || c->device_type == NWIPE_DEVICE_SCSI ) { if( c->templ_has_scsitemp_data == 1 ) { if( nwipe_options.verbose ) { nwipe_log( NWIPE_LOG_NOTICE, "hddtemp: %s temp1_crit %dC", c->device_name, c->temp1_crit ); nwipe_log( NWIPE_LOG_NOTICE, "hddtemp: %s temp1_highest %dC", c->device_name, c->temp1_highest ); nwipe_log( NWIPE_LOG_NOTICE, "hddtemp: %s temp1_input %dC", c->device_name, c->temp1_input ); nwipe_log( NWIPE_LOG_NOTICE, "hddtemp: %s temp1_lcrit %dC", c->device_name, c->temp1_lcrit ); nwipe_log( NWIPE_LOG_NOTICE, "hddtemp: %s temp1_lowest %dC", c->device_name, c->temp1_lowest ); nwipe_log( NWIPE_LOG_NOTICE, "hddtemp: %s temp1_max %dC", c->device_name, c->temp1_max ); nwipe_log( NWIPE_LOG_NOTICE, "hddtemp: %s temp1_min %dC", c->device_name, c->temp1_min ); } if( nwipe_get_scsi_temperature( c ) != 0 ) { nwipe_log( NWIPE_LOG_ERROR, "get_scsi_temperature error" ); } } } } /* Update the time stamp that records when we checked the temperature, * this is used by the GUI to check temperatures periodically, typically * every 60 seconds */ c->temp1_time = time( NULL ); gettimeofday( &tv_end, 0 ); delta_t = timedifference_msec( tv_start, tv_end ); if( nwipe_options.verbose ) { nwipe_log( NWIPE_LOG_NOTICE, "get temperature for %s took %f ms", c->device_name, delta_t ); } return; } void nwipe_log_drives_temperature_limits( nwipe_context_t* c ) { /* See header for description of function */ char temperature_limits_txt[500]; int idx = 0; /* * Initialise the character string, as we are building it a few * characters at a time and it's important there it is populated * with all zeros as we are using strlen() as we build the line up. */ memset( &temperature_limits_txt, 0, sizeof( temperature_limits_txt ) ); if( c->temp1_crit != NO_TEMPERATURE_DATA ) { snprintf( temperature_limits_txt, sizeof( temperature_limits_txt ), "Temperature limits for %s, critical=%ic, ", c->device_name, c->temp1_crit ); } else { snprintf( temperature_limits_txt, sizeof( temperature_limits_txt ), "Temperature limits for %s, critical=N/A, ", c->device_name ); } idx = strlen( temperature_limits_txt ); if( c->temp1_max != NO_TEMPERATURE_DATA ) { snprintf( &temperature_limits_txt[idx], ( sizeof( temperature_limits_txt ) - idx ), "max=%ic, ", c->temp1_max ); } else { snprintf( &temperature_limits_txt[idx], ( sizeof( temperature_limits_txt ) - idx ), "max=N/A, " ); } idx = strlen( temperature_limits_txt ); if( c->temp1_highest != NO_TEMPERATURE_DATA ) { snprintf( &temperature_limits_txt[idx], ( sizeof( temperature_limits_txt ) - idx ), "highest=%ic, ", c->temp1_highest ); } else { snprintf( &temperature_limits_txt[idx], ( sizeof( temperature_limits_txt ) - idx ), "highest=N/A, " ); } idx = strlen( temperature_limits_txt ); if( c->temp1_lowest != NO_TEMPERATURE_DATA ) { snprintf( &temperature_limits_txt[idx], ( sizeof( temperature_limits_txt ) - idx ), "lowest=%ic, ", c->temp1_lowest ); } else { snprintf( &temperature_limits_txt[idx], ( sizeof( temperature_limits_txt ) - idx ), "lowest=N/A, " ); } idx = strlen( temperature_limits_txt ); if( c->temp1_min != NO_TEMPERATURE_DATA ) { snprintf( &temperature_limits_txt[idx], ( sizeof( temperature_limits_txt ) - idx ), "min=%ic, ", c->temp1_min ); } else { snprintf( &temperature_limits_txt[idx], ( sizeof( temperature_limits_txt ) - idx ), "min=N/A, " ); } idx = strlen( temperature_limits_txt ); if( c->temp1_lcrit != NO_TEMPERATURE_DATA ) { snprintf( &temperature_limits_txt[idx], ( sizeof( temperature_limits_txt ) - idx ), "low critical=%ic.", c->temp1_lcrit ); } else { snprintf( &temperature_limits_txt[idx], ( sizeof( temperature_limits_txt ) - idx ), "low critical=N/A. " ); } nwipe_log( NWIPE_LOG_INFO, "%s", temperature_limits_txt ); return; }