summaryrefslogtreecommitdiffstats
path: root/doc/guide/admin/intro.sdf
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--doc/guide/admin/intro.sdf465
1 files changed, 465 insertions, 0 deletions
diff --git a/doc/guide/admin/intro.sdf b/doc/guide/admin/intro.sdf
new file mode 100644
index 0000000..8417c1e
--- /dev/null
+++ b/doc/guide/admin/intro.sdf
@@ -0,0 +1,465 @@
+# $OpenLDAP$
+# Copyright 1999-2022 The OpenLDAP Foundation, All Rights Reserved.
+# COPYING RESTRICTIONS APPLY, see COPYRIGHT.
+H1: Introduction to OpenLDAP Directory Services
+
+This document describes how to build, configure, and operate
+{{PRD:OpenLDAP}} Software to provide directory services. This
+includes details on how to configure and run the Standalone
+{{TERM:LDAP}} Daemon, {{slapd}}(8). It is intended for new and
+experienced administrators alike. This section provides a basic
+introduction to directory services and, in particular, the directory
+services provided by {{slapd}}(8). This introduction is only
+intended to provide enough information so one might get started
+learning about {{TERM:LDAP}}, {{TERM:X.500}}, and directory services.
+
+
+H2: What is a directory service?
+
+A directory is a specialized database specifically designed for
+searching and browsing, in additional to supporting basic lookup
+and update functions.
+
+Note: A directory is defined by some as merely a database optimized
+for read access. This definition, at best, is overly simplistic.
+
+Directories tend to contain descriptive, attribute-based information
+and support sophisticated filtering capabilities. Directories
+generally do not support complicated transaction or roll-back schemes
+found in database management systems designed for handling high-volume
+complex updates. Directory updates are typically simple all-or-nothing
+changes, if they are allowed at all. Directories are generally
+tuned to give quick response to high-volume lookup or search
+operations. They may have the ability to replicate information
+widely in order to increase availability and reliability, while
+reducing response time. When directory information is replicated,
+temporary inconsistencies between the consumers may be okay, as long
+as inconsistencies are resolved in a timely manner.
+
+There are many different ways to provide a directory service.
+Different methods allow different kinds of information to be stored
+in the directory, place different requirements on how that information
+can be referenced, queried and updated, how it is protected from
+unauthorized access, etc. Some directory services are {{local}},
+providing service to a restricted context (e.g., the finger service
+on a single machine). Other services are global, providing service
+to a much broader context (e.g., the entire Internet). Global
+services are usually {{distributed}}, meaning that the data they
+contain is spread across many machines, all of which cooperate to
+provide the directory service. Typically a global service defines
+a uniform {{namespace}} which gives the same view of the data no
+matter where you are in relation to the data itself.
+
+A web directory, such as provided by the {{Curlie Project}}
+<{{URL:https://curlie.org}}>, is a good example of a directory service.
+These services catalog web pages and are specifically designed to
+support browsing and searching.
+
+While some consider the Internet {{TERM[expand]DNS}} (DNS) is an
+example of a globally distributed directory service, DNS is not
+browsable nor searchable. It is more properly described as a
+globally distributed {{lookup}} service.
+
+
+H2: What is LDAP?
+
+{{TERM:LDAP}} stands for {{TERM[expand]LDAP}}. As the name suggests,
+it is a lightweight protocol for accessing directory services,
+specifically {{TERM:X.500}}-based directory services. LDAP runs
+over {{TERM:TCP}}/{{TERM:IP}} or other connection oriented transfer
+services. LDAP is an {{ORG:IETF}} Standard Track protocol and is
+specified in "Lightweight Directory Access Protocol (LDAP) Technical
+Specification Road Map" {{REF:RFC4510}}.
+
+This section gives an overview of LDAP from a user's perspective.
+
+{{What kind of information can be stored in the directory?}} The
+LDAP information model is based on {{entries}}. An entry is a
+collection of attributes that has a globally-unique {{TERM[expand]DN}}
+(DN). The DN is used to refer to the entry unambiguously. Each of
+the entry's attributes has a {{type}} and one or more {{values}}.
+The types are typically mnemonic strings, like "{{EX:cn}}" for
+common name, or "{{EX:mail}}" for email address. The syntax of
+values depend on the attribute type. For example, a {{EX:cn}}
+attribute might contain the value {{EX:Babs Jensen}}. A {{EX:mail}}
+attribute might contain the value "{{EX:babs@example.com}}". A
+{{EX:jpegPhoto}} attribute would contain a photograph in the
+{{TERM:JPEG}} (binary) format.
+
+{{How is the information arranged?}} In LDAP, directory entries
+are arranged in a hierarchical tree-like structure. Traditionally,
+this structure reflected the geographic and/or organizational
+boundaries. Entries representing countries appear at the top of
+the tree. Below them are entries representing states and national
+organizations. Below them might be entries representing organizational
+units, people, printers, documents, or just about anything else
+you can think of. Figure 1.1 shows an example LDAP directory tree
+using traditional naming.
+
+!import "intro_tree.png"; align="center"; \
+ title="LDAP directory tree (traditional naming)"
+FT[align="Center"] Figure 1.1: LDAP directory tree (traditional naming)
+
+The tree may also be arranged based upon Internet domain names.
+This naming approach is becoming increasing popular as it allows
+for directory services to be located using the {{DNS}}.
+Figure 1.2 shows an example LDAP directory tree using domain-based
+naming.
+
+!import "intro_dctree.png"; align="center"; \
+ title="LDAP directory tree (Internet naming)"
+FT[align="Center"] Figure 1.2: LDAP directory tree (Internet naming)
+
+In addition, LDAP allows you to control which attributes are required
+and allowed in an entry through the use of a special attribute
+called {{EX:objectClass}}. The values of the {{EX:objectClass}}
+attribute determine the {{schema}} rules the entry must obey.
+
+{{How is the information referenced?}} An entry is referenced by
+its distinguished name, which is constructed by taking the name of
+the entry itself (called the {{TERM[expand]RDN}} or RDN) and
+concatenating the names of its ancestor entries. For example, the
+entry for Barbara Jensen in the Internet naming example above has
+an RDN of {{EX:uid=babs}} and a DN of
+{{EX:uid=babs,ou=People,dc=example,dc=com}}. The full DN format is
+described in {{REF:RFC4514}}, "LDAP: String Representation of
+Distinguished Names."
+
+{{How is the information accessed?}} LDAP defines operations for
+interrogating and updating the directory. Operations are provided
+for adding and deleting an entry from the directory, changing an
+existing entry, and changing the name of an entry. Most of the
+time, though, LDAP is used to search for information in the directory.
+The LDAP search operation allows some portion of the directory to
+be searched for entries that match some criteria specified by a
+search filter. Information can be requested from each entry that
+matches the criteria.
+
+For example, you might want to search the entire directory subtree
+at and below {{EX:dc=example,dc=com}} for people with the name
+{{EX:Barbara Jensen}}, retrieving the email address of each entry
+found. LDAP lets you do this easily. Or you might want to search
+the entries directly below the {{EX:st=California,c=US}} entry for
+organizations with the string {{EX:Acme}} in their name, and that
+have a fax number. LDAP lets you do this too. The next section
+describes in more detail what you can do with LDAP and how it might
+be useful to you.
+
+{{How is the information protected from unauthorized access?}} Some
+directory services provide no protection, allowing anyone to see
+the information. LDAP provides a mechanism for a client to authenticate,
+or prove its identity to a directory server, paving the way for
+rich access control to protect the information the server contains.
+LDAP also supports data security (integrity and confidentiality)
+services.
+
+
+H2: When should I use LDAP?
+
+This is a very good question. In general, you should use a Directory
+server when you require data to be centrally managed, stored and accessible via
+standards based methods.
+
+Some common examples found throughout the industry are, but not limited to:
+
+* Machine Authentication
+* User Authentication
+* User/System Groups
+* Address book
+* Organization Representation
+* Asset Tracking
+* Telephony Information Store
+* User resource management
+* E-mail address lookups
+* Application Configuration store
+* PBX Configuration store
+* etc.....
+
+There are various {{SECT:Distributed Schema Files}} that are standards based, but
+you can always create your own {{SECT:Schema Specification}}.
+
+There are always new ways to use a Directory and apply LDAP principles to address
+certain problems, therefore there is no simple answer to this question.
+
+If in doubt, join the general LDAP forum for non-commercial discussions and
+information relating to LDAP at:
+{{URL:http://www.umich.edu/~dirsvcs/ldap/mailinglist.html}} and ask
+
+H2: When should I not use LDAP?
+
+When you start finding yourself bending the directory to do what you require,
+maybe a redesign is needed. Or if you only require one application to use and
+manipulate your data (for discussion of LDAP vs RDBMS, please read the
+{{SECT:LDAP vs RDBMS}} section).
+
+It will become obvious when LDAP is the right tool for the job.
+
+
+H2: How does LDAP work?
+
+LDAP utilizes a {{client-server model}}. One or more LDAP servers
+contain the data making up the directory information tree ({{TERM:DIT}}).
+The client connects to servers and asks it a question. The server
+responds with an answer and/or with a pointer to where the client
+can get additional information (typically, another LDAP server).
+No matter which LDAP server a client connects to, it sees the same
+view of the directory; a name presented to one LDAP server references
+the same entry it would at another LDAP server. This is an important
+feature of a global directory service.
+
+
+H2: What about X.500?
+
+Technically, {{TERM:LDAP}} is a directory access protocol to an
+{{TERM:X.500}} directory service, the {{TERM:OSI}} directory service.
+Initially, LDAP clients accessed gateways to the X.500 directory service.
+This gateway ran LDAP between the client and gateway and X.500's
+{{TERM[expand]DAP}} ({{TERM:DAP}}) between the gateway and the
+X.500 server. DAP is a heavyweight protocol that operates over a
+full OSI protocol stack and requires a significant amount of
+computing resources. LDAP is designed to operate over
+{{TERM:TCP}}/{{TERM:IP}} and provides most of the functionality of
+DAP at a much lower cost.
+
+While LDAP is still used to access X.500 directory service via
+gateways, LDAP is now more commonly directly implemented in X.500
+servers.
+
+The Standalone LDAP Daemon, or {{slapd}}(8), can be viewed as a
+{{lightweight}} X.500 directory server. That is, it does not
+implement the X.500's DAP nor does it support the complete X.500
+models.
+
+If you are already running a X.500 DAP service and you want to
+continue to do so, you can probably stop reading this guide. This
+guide is all about running LDAP via {{slapd}}(8), without running
+X.500 DAP. If you are not running X.500 DAP, want to stop running
+X.500 DAP, or have no immediate plans to run X.500 DAP, read on.
+
+It is possible to replicate data from an LDAP directory server to
+a X.500 DAP {{TERM:DSA}}. This requires an LDAP/DAP gateway.
+OpenLDAP Software does not include such a gateway.
+
+
+H2: What is the difference between LDAPv2 and LDAPv3?
+
+LDAPv3 was developed in the late 1990's to replace LDAPv2.
+LDAPv3 adds the following features to LDAP:
+
+ * Strong authentication and data security services via {{TERM:SASL}}
+ * Certificate authentication and data security services via {{TERM:TLS}} (SSL)
+ * Internationalization through the use of Unicode
+ * Referrals and Continuations
+ * Schema Discovery
+ * Extensibility (controls, extended operations, and more)
+
+LDAPv2 is historic ({{REF:RFC3494}}). As most {{so-called}} LDAPv2
+implementations (including {{slapd}}(8)) do not conform to the
+LDAPv2 technical specification, interoperability amongst
+implementations claiming LDAPv2 support is limited. As LDAPv2
+differs significantly from LDAPv3, deploying both LDAPv2 and LDAPv3
+simultaneously is quite problematic. LDAPv2 should be avoided.
+LDAPv2 is disabled by default.
+
+
+H2: LDAP vs RDBMS
+
+This question is raised many times, in different forms. The most common,
+however, is: {{Why doesn't OpenLDAP use a relational database management
+ system (RDBMS) instead of an embedded key/value store like LMDB?}} In
+general, expecting that the sophisticated algorithms implemented by
+commercial-grade RDBMS would make {{OpenLDAP}} be faster or somehow better
+and, at the same time, permitting sharing of data with other applications.
+
+The short answer is that use of an embedded database and custom indexing system
+allows OpenLDAP to provide greater performance and scalability without loss of
+reliability. OpenLDAP uses {{TERM:LMDB}} concurrent / transactional
+database software.
+
+Now for the long answer. We are all confronted all the time with the choice
+RDBMSes vs. directories. It is a hard choice and no simple answer exists.
+
+It is tempting to think that having a RDBMS backend to the directory solves all
+problems. However, it is a pig. This is because the data models are very
+different. Representing directory data with a relational database is going to
+require splitting data into multiple tables.
+
+Think for a moment about the person objectclass. Its definition requires
+attribute types objectclass, sn and cn and allows attribute types userPassword,
+telephoneNumber, seeAlso and description. All of these attributes are multivalued,
+so a normalization requires putting each attribute type in a separate table.
+
+Now you have to decide on appropriate keys for those tables. The primary key
+might be a combination of the DN, but this becomes rather inefficient on most
+database implementations.
+
+The big problem now is that accessing data from one entry requires seeking on
+different disk areas. On some applications this may be OK but in many
+applications performance suffers.
+
+The only attribute types that can be put in the main table entry are those that
+are mandatory and single-value. You may add also the optional single-valued
+attributes and set them to NULL or something if not present.
+
+But wait, the entry can have multiple objectclasses and they are organized in
+an inheritance hierarchy. An entry of objectclass organizationalPerson now has
+the attributes from person plus a few others and some formerly optional attribute
+types are now mandatory.
+
+What to do? Should we have different tables for the different objectclasses?
+This way the person would have an entry on the person table, another on
+organizationalPerson, etc. Or should we get rid of person and put everything on
+the second table?
+
+But what do we do with a filter like (cn=*) where cn is an attribute type that
+appears in many, many objectclasses. Should we search all possible tables for
+matching entries? Not very attractive.
+
+Once this point is reached, three approaches come to mind. One is to do full
+normalization so that each attribute type, no matter what, has its own separate
+table. The simplistic approach where the DN is part of the primary key is
+extremely wasteful, and calls for an approach where the entry has a unique
+numeric id that is used instead for the keys and a main table that maps DNs to
+ids. The approach, anyway, is very inefficient when several attribute types from
+one or more entries are requested. Such a database, though cumbersomely,
+can be managed from SQL applications.
+
+The second approach is to put the whole entry as a blob in a table shared by all
+entries regardless of the objectclass and have additional tables that act as
+indices for the first table. Index tables are not database indices, but are
+fully managed by the LDAP server-side implementation. However, the database
+becomes unusable from SQL. And, thus, a fully fledged database system provides
+little or no advantage. The full generality of the database is unneeded.
+Much better to use something light and fast, like {{TERM:LMDB}}.
+
+A completely different way to see this is to give up any hopes of implementing
+the directory data model. In this case, LDAP is used as an access protocol to
+data that provides only superficially the directory data model. For instance,
+it may be read only or, where updates are allowed, restrictions are applied,
+such as making single-value attribute types that would allow for multiple values.
+Or the impossibility to add new objectclasses to an existing entry or remove
+one of those present. The restrictions span the range from allowed restrictions
+(that might be elsewhere the result of access control) to outright violations of
+the data model. It can be, however, a method to provide LDAP access to preexisting
+data that is used by other applications. But in the understanding that we don't
+really have a "directory".
+
+Existing commercial LDAP server implementations that use a relational database
+are either from the first kind or the third. I don't know of any implementation
+that uses a relational database to do inefficiently what LMDB does efficiently.
+For those who are interested in "third way" (exposing EXISTING data from RDBMS
+as LDAP tree, having some limitations compared to classic LDAP model, but making
+it possible to interoperate between LDAP and SQL applications):
+
+OpenLDAP includes back-sql - the backend that makes it possible. It uses ODBC +
+additional metainformation about translating LDAP queries to SQL queries in your
+RDBMS schema, providing different levels of access - from read-only to full
+access depending on RDBMS you use, and your schema.
+
+For more information on concept and limitations, see {{slapd-sql}}(5) man page,
+or the {{SECT: Backends}} section. There are also several examples for several
+RDBMSes in {{F:back-sql/rdbms_depend/*}} subdirectories.
+
+
+H2: What is slapd and what can it do?
+
+{{slapd}}(8) is an LDAP directory server that runs on many different
+platforms. You can use it to provide a directory service of your
+very own. Your directory can contain pretty much anything you want
+to put in it. You can connect it to the global LDAP directory
+service, or run a service all by yourself. Some of slapd's more
+interesting features and capabilities include:
+
+{{B:LDAPv3}}: {{slapd}} implements version 3 of {{TERM[expand]LDAP}}.
+{{slapd}} supports LDAP over both {{TERM:IPv4}} and {{TERM:IPv6}}
+and Unix {{TERM:IPC}}.
+
+{{B:{{TERM[expand]SASL}}}}: {{slapd}} supports strong authentication
+and data security (integrity and confidentiality) services through
+the use of SASL. {{slapd}}'s SASL implementation utilizes {{PRD:Cyrus
+SASL}} software which supports a number of mechanisms including
+{{TERM:DIGEST-MD5}}, {{TERM:EXTERNAL}}, and {{TERM:GSSAPI}}.
+
+{{B:{{TERM[expand]TLS}}}}: {{slapd}} supports certificate-based
+authentication and data security (integrity and confidentiality)
+services through the use of TLS (or SSL). {{slapd}}'s TLS
+implementation can utilize {{PRD:OpenSSL}} or {{PRD:GnuTLS}},
+software.
+
+{{B:Topology control}}: {{slapd}} can be configured to restrict
+access at the socket layer based upon network topology information.
+This feature utilizes {{TCP wrappers}}.
+
+{{B:Access control}}: {{slapd}} provides a rich and powerful access
+control facility, allowing you to control access to the information
+in your database(s). You can control access to entries based on
+LDAP authorization information, {{TERM:IP}} address, domain name
+and other criteria. {{slapd}} supports both {{static}} and {{dynamic}}
+access control information.
+
+{{B:Internationalization}}: {{slapd}} supports Unicode and language
+tags.
+
+{{B:Choice of database backends}}: {{slapd}} comes with a variety
+of different database backends you can choose from. They include
+{{TERM:MDB}}, a hierarchical high-performance transactional database backend;
+and PASSWD, a simple backend interface to the {{passwd}}(5) file.
+The MDB backend utilizes {{TERM:LMDB}}.
+
+{{B:Multiple database instances}}: {{slapd}} can be configured to
+serve multiple databases at the same time. This means that a single
+{{slapd}} server can respond to requests for many logically different
+portions of the LDAP tree, using the same or different database
+backends.
+
+{{B:Generic modules API}}: If you require even more customization,
+{{slapd}} lets you write your own modules easily. {{slapd}} consists
+of two distinct parts: a front end that handles protocol communication
+with LDAP clients; and modules which handle specific tasks such as
+database operations. Because these two pieces communicate via a
+well-defined {{TERM:C}} {{TERM:API}}, you can write your own
+customized modules which extend {{slapd}} in numerous ways. Also,
+a number of {{programmable database}} modules are provided. These
+allow you to expose external data sources to {{slapd}} using popular
+programming languages ({{PRD:Perl}}, and {{TERM:SQL}}).
+
+{{B:Threads}}: {{slapd}} is threaded for high performance. A single
+multi-threaded {{slapd}} process handles all incoming requests using
+a pool of threads. This reduces the amount of system overhead
+required while providing high performance.
+
+{{B:Replication}}: {{slapd}} can be configured to maintain shadow
+copies of directory information. This {{single-provider/multiple-consumer}}
+replication scheme is vital in high-volume environments where a
+single {{slapd}} installation just doesn't provide the necessary availability
+or reliability. For extremely demanding environments where a
+single point of failure is not acceptable, {{multi-provider}} replication
+is also available. With {{multi-provider}} replication two or more nodes can
+accept write operations allowing for redundancy at the provider level.
+
+{{slapd}} includes support for {{LDAP Sync}}-based
+replication.
+
+{{B:Proxy Cache}}: {{slapd}} can be configured as a caching
+LDAP proxy service.
+
+{{B:Configuration}}: {{slapd}} is highly configurable through a
+single configuration file which allows you to change just about
+everything you'd ever want to change. Configuration options have
+reasonable defaults, making your job much easier. Configuration can
+also be performed dynamically using LDAP itself, which greatly
+improves manageability.
+
+H2: What is lloadd and what can it do?
+
+{{lloadd}}(8) is a daemon that provides an LDAPv3 load balancer service.
+It is responsible for distributing requests across a set of {{slapd}}
+instances.
+
+See the {{SECT:Load Balancing with lloadd}} chapter for information
+about how to configure and run {{lloadd}}(8).
+
+Alternatively, the load balancer can run as a module embedded inside of
+{{slapd}}. This is also described in the {{SECT:Load Balancing with lloadd}} chapter.
+
+