Merging upstream version 2.1.7.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 0 insertions, 537 deletions

diff --git a/tools/cluster-init.in b/tools/cluster-init.in
deleted file mode 100755
index 1485c81..0000000
--- a/tools/cluster-init.in
+++ /dev/null
@@ -1,537 +0,0 @@
-#!@BASH_PATH@
-#
-# Copyright 2011-2023 the Pacemaker project contributors
-#
-# The version control history for this file may have further details.
-#
-# This source code is licensed under the GNU General Public License version 2
-# or later (GPLv2+) WITHOUT ANY WARRANTY.
-#
-
-accept_defaults=0
-do_raw=0
-ETCHOSTS=0
-nodelist=0
-limit=0
-
-pkgs="corosync xinetd nmap abrt-cli fence-agents perl-TimeDate gdb"
-
-transport="multicast"
-inaddr_any="no"
-
-INSTALL=
-cs_conf=
-fence_conf=
-
-dsh_group=0
-if [ ! -z $cluster_name ]; then
-    cluster=$cluster_name
-else
-    cluster=dummy0
-fi
-
-#  Corosync Settings
-cs_port=666
-
-# Settings that work great on nXX
-join=60
-#token=3000
-consensus=1500
-
-# Official settings
-join=2000
-token=5000
-consensus=2500
-
-# Testing
-join=1000
-consensus=7500
-do_debug=off
-
-function ip_for_node() {
-    ping -c 1 $1 | grep "bytes from" | head -n 1 | sed -e 's/.*bytes from//' -e 's/: icmp.*//'  | awk  '{print $NF}' | sed 's:(::' | sed 's:)::'
-#    if [ $do_raw = 1 ]; then
-#	echo $1
-#    else
-#	#host $1 | grep "has address" | head -n 1 | awk '{print $NF}' | sed 's:(::' | sed 's:)::'
-#    fi
-}
-function id_for_node() {
-    ip_for_node $* | tr '.' ' ' | awk '{print $4}'
-}
-function name_for_node() {
-    echo $1 | awk -F. '{print $1}'
-}
-
-function helptext() {
-    echo "cluster-init - Configure cluster communication for the infrastructures supported by Pacemaker"
-    echo ""
-    echo "-g, --group         Specify the group to operate on/with"
-    echo "-w, --host          Specify a host to operate on/with.  May be specified multiple times"
-    echo "-r, --raw-ip        Supplied nodes were listed as their IP addresses"
-    echo ""
-    echo "-c, --corosync      configure for corosync"
-    echo "-C, --nodelist      configure for corosync with a node list"
-    echo "-u, --unicast       configure point-to-point communication instead of multicast"
-    echo ""
-    echo "-I, --install       Install packages"
-    echo ""
-    echo "-d, --debug         Enable debug logging for the cluster"
-    echo "--hosts             Copy the local /etc/hosts file to all nodes"
-    echo "-e, --extra list    Whitespace separated list of extra packages to install"
-    echo "-l, --limit N       Use the first N hosts from the named group" 
-    echo "                    Extra packages to install"
-    exit $1
-}
-
-host_input=""
-while true; do
-    case "$1" in
-	-g) cluster=$2;
-	    shift; shift;;
-	-w|--host)
-	    for h in $2; do
-		host_input="$host_input -w $h";
-	    done
-	    shift; shift;;
-	-w) host_input="$host_input -w $2"
-	    shift; shift;;
-	-r|--raw-ip) do_raw=1;       shift;;
-
-	-d|--debug) do_debug=on; shift;;
-
-	-I|--install) INSTALL=Yes; shift;;
-	--hosts) ETCHOSTS=1; shift;;
-
-	-c|--corosync) CTYPE=corosync; shift;;
-	-C|--nodelist) CTYPE=corosync; nodelist=1; shift;;
-	-u|--unicast) nodelist=1; transport=udpu; inaddr_any="yes"; shift;;
-	-e|--extra) pkgs="$pkgs $2"; shift; shift;;
-	-t|--test)  pkgs="$pkgs valgrind"; shift;;
-	-l|--limit) limit=$2; shift; shift;;
-
-	r*[0-9])
-	    rhel=`echo $1 | sed -e s/rhel// -e s/-// -e s/r//`
-	    pkgs="$pkgs qarsh-server";
-	    case $rhel in
-		7) CTYPE=corosync;;
-	    esac
-	    shift
-	    ;;
-
-	f*[0-9][0-9])
-	    CTYPE=corosync;
-	    shift
-	    ;;
-
-	-y|--yes|--defaults) accept_defaults=1; shift;;
-	-x) set -x; shift;;
-	-\?|--help) helptext 0; shift;;
-	"") break;;
-	*) echo "unknown option: $1"; exit 1;;
-    esac
-done
-
-if [ ! -z $cluster ]; then
-    host_input="-g $cluster"
-    # use the last digit present in the variable (if any)
-    dsh_group=`echo $cluster | sed 's/[^0-9][^0-9]*//g;s/.*\([0-9]\)$/\1/'`
-fi
-
-if [ -z $dsh_group ]; then
-    dsh_group=1
-fi
-
-if [ x = "x$host_input" -a x = "x$cluster" ]; then
-    if [ -d $HOME/.dsh/group ]; then
-        read -p "Please specify a dsh group you'd like to configure as a cluster? [] " -t 60 cluster
-    else
-        read -p "Please specify a whitespace delimetered list of nodes you'd like to configure as a cluster? [] " -t 60 host_list
-
-        for h in $2; do
-	    host_input="$host_input -w $h";
-	done
-    fi
-fi
-
-if [ -z "$host_input" ]; then
-    echo "You didn't specify any nodes or groups to configure"
-    exit 1
-fi
-
-if [ $limit -gt 0 ]; then
-    echo "Using only the first $limit hosts in $cluster group"
-    host_list=`cluster-helper --list bullet $host_input | head -n $limit | tr '\n*' '  '`
-else
-    host_list=`cluster-helper --list short $host_input`
-fi
-num_hosts=`echo $host_list | wc -w`
-
-if [ $num_hosts -gt 9 ]; then
-    cs_port=66
-fi
-
-for h in $host_list; do
-    ping -c 1 -q $h
-    if [ $? != 0 ]; then
-	echo "Using long names..."
-	host_list=`cluster-helper --list long $host_input`
-	break
-    fi
-done
-
-if [ -z $CTYPE ]; then
-    echo ""
-    read -p "Where should Pacemaker obtain membership and quorum from? [corosync] (corosync) " -t 60 CTYPE
-fi
-
-case $CTYPE in
-    corosync) cs_conf="@PCMK__COROSYNC_CONF@" ;;
-esac
-
-function get_defaults()
-{
-    if [ -z $SSH ]; then
-	SSH="No"
-    fi
-
-    if [ -z $SELINUX ]; then
-	SELINUX="No"
-    fi
-
-    if [ -z $IPTABLES ]; then
-	IPTABLES="Yes"
-    fi
-
-    if [ -z $DOMAIN ]; then
-	DOMAIN="No"
-    fi
-    if [ -z $INSTALL ]; then
-	INSTALL="Yes"
-    fi
-    if [ -z $DATE ]; then
-	DATE="No"
-    fi
-}
-
-get_defaults
-if [ $accept_defaults = 0 ]; then
-    echo ""
-    read -p "Shall I install an ssh key to cluster nodes? [$SSH] " -t 60 SSH
-    echo ""
-    echo "SELinux prevent many things, including password-less ssh logins"
-    read -p "Shall I disable selinux? [$SELINUX] " -t 60 SELINUX
-    echo ""
-    echo "Incorrectly configured firewalls will prevent corosync from starting up"
-    read -p "Shall I disable iptables? [$IPTABLES] " -t 60 IPTABLES
-
-    echo ""
-    read -p "Shall I install/update the relevant packages? [$INSTALL] "  -t 60 INSTALL
-
-    echo ""
-    read -p "Shall I sync the date/time? [$DATE] "  -t 60 DATE
-fi
-get_defaults
-
-echo ""
-echo "Detecting possible fencing options"
-if [ -e /etc/cluster/fence_xvm.key ]; then
-    echo "* Found fence_xvm"
-    fence_conf=/etc/cluster/fence_xvm.key
-    pkgs="$pkgs fence-virt"
-fi
-
-if [ ! -z ${OS_AUTH_URL} ]; then
-    echo "* Found openstack credentials"
-    fence_conf=/sbin/fence_openstack
-    pkgs="$pkgs python-novaclient"
-fi
-echo ""
-echo "Beginning cluster configuration"
-echo ""
-
-case $SSH in
-    [Yy][Ee][Ss]|[Yy])
-	for host in $host_list; do
-	    echo "Installing our ssh key on ${host}"
-	    ssh-copy-id root@${host} >/dev/null 2>&1
-	    # Fix selinux labeling
-	    ssh -l root ${host} -- restorecon -R -v .
-	done
-	;;
-esac
-
-case $DATE in
-    [Yy][Ee][Ss]|[Yy])
-	for host in $host_list; do
-	    echo "Setting time on ${host}"
-	    scp /etc/localtime root@${host}:/etc
-	    now=`date +%s`
-	    ssh -l root ${host} -- date -s @$now
-	    echo ""
-	done
-	;;
-esac
-
-init=`mktemp`
-cat<<-END>$init
-verbose=0
-pkgs="$pkgs"
-
-lhost=\`uname -n\`
-lshort=\`echo \$lhost | awk -F. '{print \$1}'\`
-
-log() {
-    printf "%-10s  \$*\n" "\$lshort:" 1>&2
-}
-
-debug() {
-    if [ \$verbose -gt 0 ]; then
-	log "Debug: \$*"
-    fi
-}
-
-info() {
-    log "\$*"
-}
-
-warning() {
-    log "WARN: \$*"
-}
-
-fatal() {
-    log "ERROR: \$*"
-    exit 1
-}
-
-case $SELINUX in
-    [Yy][Ee][Ss]|[Yy])
-	sed -i.sed "s/enforcing/disabled/g" /etc/selinux/config
-	;;
-esac
-
-case $IPTABLES in
-    [Yy][Ee][Ss]|[Yy]|"")
-	service iptables stop
-	chkconfig iptables off
-	service firewalld stop
-	chkconfig firewalld off
-	;;
-esac
-
-case $DOMAIN in
-    [Nn][Oo]|"")
-	;;
-    *.*)
-	if
-            ! grep domain /etc/resolv.conf
-        then
-	    sed -i.sed "s/nameserver/domain\ $DOMAIN\\\nnameserver/g" /etc/resolv.conf
-	fi
-	;;
-    *) echo "Unknown domain: $DOMAIN";;
-esac
-
-case $INSTALL in
-    [Yy][Ee][Ss]|[Yy]|"")
-	info Installing cluster software
-	yum install -y $pkgs pacemaker
-	;;
-esac
-
-info "Configuring services"
-chkconfig xinetd on
-service xinetd start &>/dev/null
-
-chkconfig corosync off &> /dev/null
-mkdir -p /etc/cluster
-
-info "Turning on core files"
-grep -q "unlimited" /etc/bashrc
-if [ $? = 1 ]; then
-    sed -i.sed "s/bashrc/bashrc\\\nulimit\ -c\ unlimited/g" /etc/bashrc
-fi
-
-function patch_cs_config() {
-    test $num_hosts != 2
-    two_node=$?
-
-    priority="info"
-    if [ $do_debug = 1 ]; then
-	priority="debug"
-    fi
-
-    ssh -l root ${host} -- sed -i.sed "s/.*mcastaddr:.*/mcastaddr:\ 226.94.1.1/g" $cs_conf
-    ssh -l root ${host} -- sed -i.sed "s/.*mcastport:.*/mcastport:\ $cs_port$dsh_group/g" $cs_conf
-    ssh -l root ${host} -- sed -i.sed "s/.*bindnetaddr:.*/bindnetaddr:\ $ip/g" $cs_conf
-    ssh -l root ${host} -- sed -i.sed "s/.*syslog_facility:.*/syslog_facility:\ daemon/g" $cs_conf
-    ssh -l root ${host} -- sed -i.sed "s/.*logfile_priority:.*/logfile_priority:\ $priority/g" $cs_conf
-
-    if [ ! -z $token ]; then
-	ssh -l root ${host} -- sed -i.sed "s/.*token:.*/token:\ $token/g" $cs_conf
-    fi
-    if [ ! -z $consensus ]; then
-	ssh -l root ${host} -- sed -i.sed "s/.*consensus:.*/consensus:\ $consensus/g" $cs_conf
-    fi
-    if [ ! -z $join ]; then
-	ssh -l root ${host} -- sed -i.sed "s/^join:.*/join:\ $join/g" $cs_conf
-	ssh -l root ${host} -- sed -i.sed "s/\\\Wjoin:.*/join:\ $join/g" $cs_conf
-    fi
-
-    ssh -l root ${host} -- grep -q "corosync_votequorum" $cs_conf 2>&1 > /dev/null
-    if [ $? -eq 0 ]; then
-        ssh -l root ${host} -- sed -i.sed "s/\\\Wexpected_votes:.*/expected_votes:\ $num_hosts/g" $cs_conf
-        ssh -l root ${host} -- sed -i.sed "s/\\\Wtwo_node:.*/two_node:\ $two_node/g" $cs_conf
-    else
-        printf "%-10s  Wrong quorum provider: installing $cs_conf for corosync instead\n" ${host}
-        create_cs_config
-    fi
-}
-
-function create_cs_config() {
-    cs_tmp=/tmp/cs_conf.$$
-    test $num_hosts != 2
-    two_node=$?
-
-    # Base config
-    priority="info"
-    if [ $do_debug = 1 ]; then
-	priority="debug"
-    fi
-
-    cat <<-END >$cs_tmp
-# Please read the corosync.conf.5 manual page
-totem {
-        version: 2
-
-        # cypto_cipher and crypto_hash: Used for mutual node authentication.
-        # If you choose to enable this, then do remember to create a shared
-        # secret with "corosync-keygen".
-        crypto_cipher: none
-        crypto_hash: none
-
-        # Assign a fixed node id
-        nodeid:         $id
-
-        # Disable encryption
-        secauth:        off
-
-	transport:      $transport
-	inaddr_any:     $inaddr_any
-
-        # interface: define at least one interface to communicate
-        # over. If you define more than one interface stanza, you must
-        # also set rrp_mode.
-        interface {
-                # Rings must be consecutively numbered, starting at 0.
-                ringnumber: 0
-
-                # This is normally the *network* address of the
-                # interface to bind to. This ensures that you can use
-                # identical instances of this configuration file
-                # across all your cluster nodes, without having to
-                # modify this option.
-                bindnetaddr: $ip
-
-                # However, if you have multiple physical network
-                # interfaces configured for the same subnet, then the
-                # network address alone is not sufficient to identify
-                # the interface Corosync should bind to. In that case,
-                # configure the *host* address of the interface
-                # instead:
-                # bindnetaddr: 192.168.1.1
-                # When selecting a multicast address, consider RFC
-                # 2365 (which, among other things, specifies that
-                # 239.255.x.x addresses are left to the discretion of
-                # the network administrator). Do not reuse multicast
-                # addresses across multiple Corosync clusters sharing
-                # the same network.
-
-                # Corosync uses the port you specify here for UDP
-                # messaging, and also the immediately preceding
-                # port. Thus if you set this to 5405, Corosync sends
-                # messages over UDP ports 5405 and 5404.
-                mcastport: $cs_port$dsh_group
-
-                # Time-to-live for cluster communication packets. The
-                # number of hops (routers) that this ring will allow
-                # itself to pass. Note that multicast routing must be
-                # specifically enabled on most network routers.
-                ttl: 1
-                mcastaddr: 226.94.1.1
-        }
-}
-
-logging {
-        debug: off
-        fileline: off
-        to_syslog: yes
-        to_stderr: no
-        syslog_facility: daemon
-        timestamp: on
-        to_logfile: yes
-        logfile: /var/log/corosync.log
-        logfile_priority: $priority
-}
-
-amf {
-        mode: disabled
-}
-
-quorum {
-        provider: corosync_votequorum
-        expected_votes: $num_hosts
-        votes: 1
-        two_node: $two_node
-        wait_for_all: 0
-        last_man_standing: 0
-        auto_tie_breaker: 0
-}
-END
-    scp -q $cs_tmp root@${host}:$cs_conf
-    rm -f $cs_tmp
-}
-
-for host in $host_list; do
-    echo ""
-    echo ""
-    echo "* Configuring $host"
-
-    cs_short_host=`name_for_node $host`
-    ip=`ip_for_node $host`
-    id=`id_for_node $host`
-
-    echo $ip | grep -qis NXDOMAIN
-    if [ $? = 0 ]; then
-	echo "Couldn't find resolve $host to an IP address"
-	exit 1
-    fi
-
-    if [ `uname -n` = $host ]; then
-	bash $init
-    else
-	cat $init | ssh -l root -T $host -- "cat > $init; bash $init"
-    fi
-
-    if [ "x$fence_conf" != x ]; then
-	if [ -e $fence_conf ]; then
-	    scp $fence_conf root@${host}:$fence_conf
-	fi
-    fi
-
-    if [ $ETCHOSTS = 1 ]; then
-	scp /etc/hosts root@${host}:/etc/hosts
-    fi
-
-    ssh -l root ${host} -- grep -q "token:" $cs_conf 2>&1 > /dev/null
-    new_config=$?
-    new_config=1
-
-    if [ $new_config = 0 ]; then
-        printf "%-10s  Updating $cs_conf\n" ${host}:
-        patch_cs_config
-    else
-        printf "%-10s  Installing $cs_conf\n" ${host}:
-        create_cs_config
-    fi
-done